www.iGo.com
Mobility Electronics Inc.
17800 North Perimeter Drive, Ste. 200, Scottsdale, AZ 85255 USA
Tel: 1-480-596-0061, 1-888-205-0093; Fax: 1-480-596-0349
Over-voltage protection
Over-current limit
Over-temperature protection
Short circuit protection
Surge protection
Safety Features
100-240 VAC; 50/60 Hz
3.0 x 5.6 x 0.9”
(78.3 x 141.0 x 23.4mm)
Specifications
Compatibility hang tag
User Guide
Notebook tips (See attached hang tag for corresponding models
and tips)
Carrying case
No input or output
power
Notebook is
not charging
Probable Cause(s)
Issue
Possible Solution(s)
Standard Wall Outlet: Once connected, your battery will
automatically charge regardless of whether your electronic
How to Use This iGo Power Adapter
Troubleshooting
Warranty
Thank you for purchasing one of iGo’s mobile solutions. Help us
serve you better by taking a moment to register your product at
www.iGo.com/registration. Failure to register does not diminish
your warranty rights.
Product Registration
10. Always use the appropriate cables and connectors supplied
with your adapter as shown in this User Guide. Use of
cables, connectors or other accessories not supplied with
your product may result in injury or damage to your device.
Check plug connector
Check cable connections
Check outlet circuit
breaker
See above solutions
2-year limited warranty
9. Do not attempt to disassemble the adapter. It has no
serviceable or replaceable parts inside. Voltage in the adapter
can cause injury. If the adapter malfunctions, immediately
discontinue use and contact iGo Technical Support.
device is turned on or off. Note: We recommend that you use iGo
power adapters only with device batteries that meet or exceed the
original manufacturer's specifications. CAUTION: Like the power adapter
that came with your electronic device, this iGo adapter may get warm to
the touch during use. This is normal. Avoid placing your iGo adapter in
direct sunlight or next to heat sensitive materials.
wallMAX
8. Turn off the computer and unplug the adapter if you smell
something burning or if the adapter becomes overly hot.
No electricity to unit
Package Contents
7. Do not place anything on top of the adapter while in use.
So, you would like to power and charge an additional portable
electronic device? Great! wallMAX does that, too. All you need
is the included iGo dualpower® accessory and the appropriate
tip to simultaneously power/charge two electronic devices
(additional tips sold separately).
Light burned out
iGo notebook power adapter with input cord
6. Do not drop the adapter or subject it to undue shock.
LED does
not light
LED does not
light but unit appears
to power devices
User Guide
iGo dualpower® accessory
Power Your Mobile Phones, Smartphones/PDAs,
MP3 Players, Digital Cameras...
Compatibility is
always changing
Wall outlet cord (AC)
5. For indoor use only. Keep the adapter free of dust and
moisture, and avoid exposure to corrosive chemicals (such
as cleaning fluids).
3. Unplug iGo wallMAX from the power outlet each time you
attach a new tip to the cable.
Contact iGo customer
service (see contact
information on the
back of this guide)
See www.iGo.com for
current compatibility
information
Install tip on Notebook
Input Cord
4. Keep the adapter away from heat sources (such as electric
heaters) and avoid direct sunlight exposure.
Using iGo power products with patented tip technology
eliminates concern about the correct amount of power for
your device or trying to select it yourself as you do with other
products—we do it for you! The attached compatibility hang tag
will help you determine which tip you need for your notebook.
Simply attach the correct tip and get powered up and
connectedTM. If your notebook tip is not included in this
package, visit www.iGo.com to locate additional tips for
purchase. WARNING – Using the wrong tip may damage your
device or cause it to malfunction.
Tip not installed on
Notebook Input Cord
1. Never pull on the adapter cords. Always hold the plug when
inserting or removing it.
iGo power products deliver the precise amount of power
to each device through the use of interchangeable tips.
Notebook not listed
on enclosed
compatibility chart
Device is
not charging
when iGo dualpower
is configured
iGo Tip Technology
2. Select the correct tip for your notebook by reviewing the
attached tip compatibility hang tag or going to
www.iGo.com – using the wrong tip may damage your
computer or cause it to malfunction.
AC input:
Unit dimensions:
Congratulations on your iGo® power purchase!
Universally compatible with today’s popular brands, iGo wallMAX
allows you to power/charge a notebook computer from any
standard AC power source. With the included iGo dualpower®
accessory, you can simultaneously power/charge a notebook
computer and a second mobile electronic device such as a
mobile phone, smartphone/PDA, MP3 player, digital camera and
more (additional iGo power tips sold separately). No other
adapters are as powerful or as versatile as the iGo line of power
products.
A/W P/N: 8330430-01
Rev: A
Material: 80g art paper
Before installing, please read this important
safety information. Proper care of your adapter
will ensure its optimal performance.
FCC Compliance
Canada Compliance
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
This Class B digital apparatus complies with Canadian ICES-003.
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician
for help
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the product.
Sales/Customer Service: 1-888-205-0093
FCC Compliance for iGo dualpower® Accessory
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Cet appareil numériqué de la classe B est conformé à la norme
NMB-003 du Canada.
Environmental Requirements
Ambient operating temperature is 0ºC to 40ºC
Storage temperature is -40ºC to 85ºC
Product Support
We are committed to providing our customers with
first-class customer service and product support.
You can receive help in a variety of ways:
Technical Support: 1-800-474-7593
Web: www.iGo.com
© 2002-2007 Mobility Electronics, Inc. Mobility Electronics, iGo and iGo dualpower
are registered trademarks and powered up and connected is a trademark of Mobility
Electronics, Inc. All other brand names and logos are trademarks or registered
trademarks of their respective owners. Specifications are subject to change without
notice. Protected by one or more of the following patents: 5,347,211, 6,064,177,
6,700,808, 6,643,158, 6,650,560, 6,751,109, 6,775,163, 6,791,853, 6,920,056, 6,937,490
and 6,976,885. Other United States and foreign patents pending. Made in China.
P/N 8040430-01 Rev.A
1. Connect the correct notebook tip
to the iGo unit’s Notebook Input
Cord.
Notebook
Power Tip
Connection
Port
Wall outlet: Use as shown.
power tip
(sold separately)
iGo dualpower®
Accessory
Attention!
Unplug iGo wallMAX from the
power outlet each time you attach
a new tip to the cable.
Tip Selection:
Make sure you have selected the
right tip for the device you want to
charge by checking the
compatibility hang tag.
Warning:
Choosing the wrong tip may
damage your device, causing it
to malfunction.
2. Insert the AC power cord into the
iGo wallMAX body.
3 Plug into the appropriate wall outlet.
The LED on the adapter will now
illuminate, indicating that power is
available. If the LED is not lit, be sure
to check all connections. Check
Troubleshooting for additional
information.
4. Plug into the notebook.
Notebook Input Cord
AC Power Cord
wallMAX
Quick Connect Guide
Simultaneously power/charge a notebook
computer and a gadget by using the included
iGo dualpower® accessory and tips (additional
tips sold separately)
When charging both your notebook and your gadget, plug
dualpower into the connection port on the Notebook Input Cord.
Tech note:
When using iGo dualpower with this iGo adapter, the maximum
power output is shared between both devices.
If a device attached to iGo dualpower is not charging properly, it
may need more charging power than can be delivered at that
particular time. When this happens, the adapter will shut down
(LED extinguishes), and we recommend charging each device
separately.