Slim and beautiful ELAC FS 207 A
To celebrate ELAC’s 80th anniversary, we now
introduce the FS 207 in a new design. The loudspeaker
looks not only impressive, it’s ELAC's state-of-the-art
technology for the best possible value for money!
Technical features/benefits:
•
•
•
•
•
•
•
Powerful-driven new JET-III tweeter with
neodymium magnet system. Due to its ribbon
geometry, it provides a cut-off frequency of 50
kHz (!) and improved sound radiation. The inner
damping enables perfect linear frequency
response.
Innovative 150 mm concave high-power
aluminium woofer with broad rubber surround.
With a special glueing procedure, a 0.2 mm
aluminium layer is bonded to a pulp fibre cone
to form a sandwich diaphragm. Perfect tension
of the diaphragm, resulting in perfect largesignal behaviour; dampening on the back of the
diaphragm for strong bass
computer-optimized cross-over network for
improved sound power to provide for optimum
and homogenous directional characteristic
regarding the frequency range
all drivers are protected from overload
MDF cabinet design (medium density fibre board, density: 800 kg/m3)
with additional reinforcements for minimum resonances.
Another feature is ELAC’s superior bi-wiring terminal with separate
circuit boards for bass and treble circuits. The inclined binding posts are
easy to access and allow larger cable diameters (16 qmm), as well as
high-quality spade ends (e. g. WBT products).
The FS 207 A is available with plinth and new ELAC spikes/ silicone
feet
Finishes: matt black, cherry veneer, silver shadow, titan shadow, white high gloss, black high gloss
Specifications
Dimensions HxBxT
Weight
Type
Woofer
Tweeter
Recom. Amplifier Power at
Nominal Impedance
ELAC FS 207A
935 x 170 x 285 mm
approx. 15 kg
2,5-way, bass reflex
2 x 150 mm cone, magnetically
shielded
1 x JET III
30 – 250 W / channel
Crossover frequency
Nominal / Peak Power Handling
Frequency range
Sensitivity
Nominal impedance
350/2700 Hz
120 W / 160 W
36-50.000 Hz
89 dB/2.8V/m
4 Ohms
Minimum impedance
3.4 Ohms at 220 Hz