Netgear XSM7224S-100EUS network switch

ProSafe® 24-port 10 Gigabit
Stackable L2+ Managed Switch
XSM7224S
Data Sheet
The NETGEAR ProSafe 10 Gigabit Stackable Managed Switch, XSM7224S, allows for a flexible top-of-rack infrastructure. All 24 ports
of 10 Gigabit SFP+ interfaces are Gigabit/10 Gigabit capable and deliver wired speed performance with ultra low latency. Four shared
10GBase-T interfaces broaden 10 Gigabit connectivity with auto-sensing RJ45. Local/distant stacking provides versatile 10 Gigabit
deployment possibilities, such as Distributed (LACP) Aggregation for virtualized servers and storage.
Enterprise-class L2+
Combining superior resiliency, enterprise-class security, and non-blocking performance, the XSM7224S offers a full set of Layer 2
management features, as well as Layer 2+ (Layer 3 lite) with unsurpassed affordability. Together with VLAN routing, voice-class
prioritization, and chassis-like stacking, the XSM7224S can be deployed as a data center top-of-rack switch, or closer to the core of
small and medium businesses’ growing networks, as a distribution layer 10 Gigabit Ethernet aggregation switch.
L3 Scalability
The Layer 3 upgrade license XSM7224L unlocks the IPv4/IPv6 dynamic routing capabilities of the XSM7224S. Purposely built for enterprise
networks and core/aggregation layers of SMB networks, an L3 upgraded XSM7224S provides advanced routing protocols such as OSPF,
VRRP, and multicast for converged applications.
Data Center Availability
The NETGEAR 10 Gigabit Stackable Managed Switch, XSM7224S comes with a removable power module for the main power supply
with a second internal redundant power supply available as an option. Two removable fan trays increase the availability of the system,
providing front-to-back cooling airflow for best compatibility with data center hot aisle/cold aisle airflow patterns. Like all NETGEAR
ProSafe Managed Switches, the XSM7224S is backed by the NETGEAR ProSafe Lifetime Warranty.
24 SFP+10 Gigabit ports 1
1
4 Combo 10GBaseT
2
RJ45 ports
2
Console
port
Extra bay for optional
redundant power supply
Spare part: APS300W
Two Removable Fan Trays
2 Fans per Tray
Spare part (each tray): AFT200
Replaceable modular
main power supply
Sold Separately
Included
Included
Layer 3 upgrade license, see details on page 13:
24 / 7
TECHNICAL
S U P P O R T*
1-888-NETGEAR (638-4327)
Email: info@NETGEAR.com
-1-
•
Ordering part number: XSM7224L-10000S
•
RIP, OSPF, VRRP
•
Multicast routing
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S
Features at a Glance
XSM7224S
Hardware Main Features
24-port 10Gigabit SFP+
Compatible with 1000 speeds
Benefits
• 10 Gigabit wire-speed performance for aggregation applications
• Ultra low latency for top-of-rack applications
• Connect any Gigabit Ethernet (1000BaseT, 1000SX/LX) or 10 Gigabit Ethernet (10GBaseX) equipment
with an array of SFP modules
4 shared 10GBaseT RJ45 interfaces
• 100/1000/10GBaseT auto-sensing flexibility
• 10 Gigabit up to 100 m with Category 6A or better cables
• Legacy Category 6 cables allow up to 50 m 10GBaseT distances (30 m worst-case crosstalk within a
cable bundle)
Physical stacking up to 4 switches
• Chassis-like unique GUI /CLI
• Dual-ring resilient topology with 4 ports per switch
• Any of the 24 ports are stack-capable for added flexibility
• High speed 10 x 8 = 80 GE overall stacking performance
• Single IP address management
• Hot-swappable, automatic unit replacement
• Server-to-switch distributed redundant trunking across the stack for active-active server teaming connections
• Any-to-one port mirroring
Redundant hot-swappable power supplies
Replaceable fan trays
Front-to-back cooling airflow
Software Main Features
• Data center class availability
• APS300W optional redundant power supply (hot-swap)
• AFT200 spare fan tray (hot-swap)
Benefits
Layer 2 (IPv4 / IPv6 switching)
Layer 2+ (Layer 3 lite - IPv4 routing)
• Unsurpassed affordability for VLAN / subnet routing
Multiple STP, 802.3ad LACP, redundant power supply
• Enhanced resiliency for highly available networks
Fabric 480 Gbps
Performance 357 Mpps
Latency (10 Gigabit) <1.59 μs
Packet buffer memory 16 Mb
• Improved architecture for data center server access layer
• Non-blocking performance for critical top-of-rack applications
• High-speed and high-capacity solution for virtualization
• Extended buffering for maximum iSCSI /NFS scalability
NETGEAR ProSafe Control Center GUI
Industry standard CLI
• Same easy management as all other FSM72/GSM72/GSM73xx
IPv4/IPv6 L2, L3, L4 ACL (access control lists)
• Enterprise-class security
• Reduced operational expense
• Network protection based on user profile
• Network protection based on trusted application
IPv4/IPv6 L2, L3, L4 QoS (8 priority queues, DiffServ)
• Voice-class prioritization
• Traffic prioritization based on user profile or application
• More queues for VoIP, video & critical applications
IGMP snooping v2,v3
IGMP proxy, IGMP querier
32 K MAC – 1 K VLANs – 2 K multicast addresses
64 trunks 8-port each – DHCP server/relay
64 IP routes – 128 IP interfaces
L3 License Upgrade Features
• Easier multicast for IP surveillance, IPTV
• Multicast traffic reaches only the interested receivers, even without a dedicated external multicast router
• Deployable at enterprise edge, remote branch offices or closer to the core of SMB networks
Benefits
Layer 3 - IPv4 (RIPv1/v2, OSPFv1/v2, VRRP)
Layer 3 - IPv6 (OSPFv3)
• Advanced routing capabilities for core/aggregation layers
Multicast routing - IPv4/IPv6
Multicast L2 - IPv6 (MLD)
• Advanced routing of multicast streams (PIM, sparse, dense)
• Ideal for IPv4 / IPv6 transitioning networks
• Simplify large IPTV & video deployments
-2-
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S
Target Applications
Top-of-Rack Access Layer for Servers
Core
XSM7224S
ReadyNAS 4200
Server Racks
(Servers, Storage)
10 GE
With virtualization, servers and network storage devices need high-performance connectivity, low latency and network redundancy.
The XSM7224S simplifies and lowers the cost of typical top-of-rack architecture. In this configuration, two stacked switches per rack
connect up to 21 servers/storage units in a server-to-switch distributed redundant trunking mode. The hardware-stacking dual-ring
topology provides one unique CLI/GUI platform, simple management, network and servers/storage perfect resiliency, as well as
intelligent load balancing. All servers can set up their NIC with active-active teaming across the stack, allowing distributed LACP for
better performance.
Core/Aggregation for Mid-sized Networks
L3 licensing upgrade
Core
XSM7224S
GSM72xxPS/GSM73xxS Access Layer
10 GE
XSM7224S offers enterprise-class aggregation layer for medium-sized enterprise networks and even core capability for two-tiered
typical SMB networks. 1000BT/SX/LX are supported by each SFP+ port for more flexibility with non 10 Gigabit legacy equipments.
With the Layer 3 license upgrade, the XSM7224S is optimized for Layer 2/Layer 3 core switching. In this configuration, 4 stacked
XSM7224S switches authorize high performance distributed trunks and management is simplified. Each stack acts as a single routing
switch, with only one GUI/CLI and multiple distributed link aggregations. Spanning Tree is no longer required for network resiliency.
Distributed Link Aggregation (LACP) provides intelligent load balancing across the network – from the edge to the core.
-3-
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S
NETGEAR Hardware Stacking
Local and Distant Stack Topology
Local Stack Topology
AXC761
1 m Direct Attach SFP+ Cable
When switches are deployed in the same rack they can use
either:
•
•
•
SFP+ Direct Attach cables and SFP+ ports
CAT6A RJ45 cables and combo 10GBaseT ports
Two cables per switch in the stack
Four ports per switch are preferred for stacking and all 24 ports
are stack-capable.
Or Cat6A RJ45 patch cables
Each ring speed is 20 Gbps half duplex (40 Gbps full duplex).
•
Dual ring overall speed is 40 Gbps half duplex (80 Gbps full
duplex).
•
Two cables per switch in the stack
For use with built-in 10GbaseT ports
Distant Stack Topology
When switches are deployed in several locations, SFP+ optics
(AXM761 or AXM762 or AXM763) and fiber are used for this
hardware dual-ring topology, providing highest resiliency and
intelligent load balancing.
AXM761 or AXM762 or AXM763
SFP+ 10GBase-SR or LR or LRM optics
Each ring speed is 20 Gbps half duplex (40 Gbps full duplex).
Dual ring overall speed is 40 Gbps half duplex (80 Gbps full duplex).
Local and Distant Stack can be combined for maximum flexibility,
using Direct Attach SFP+ or CAT6A copper cables and AXM761/
AXM762/AXM763 SFP+ optics.
• Four SFP+ modules per switch are recommended for full 80 Gbps bandwidth
and complete redundancy
-4-
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S
NETGEAR Hardware Stacking
Features
Single IP address management
Benefits
• Stack up to 4 switches as a single “chassis” logical unit
• One GUI and one CLI managing the whole stack
• The stack acts as a single switch in the network
• The other switches in the network also see the stack as a single switch
• Growth is easy, adding a switch to the stack is as simple as connecting the new unit to the stack (configuration
is instantly updated)
Bi-directional architecture
4 ports per switch
80 Gigabit local stacking capacity
80 Gigabit distant stacking capacity
Stack fast resiliency
Automatic unit replacement (AUR)
• Higher stacking throughput capacity with lower latency and jitter for VoIP and video traffic
• Each switch in the stack understands the shortest path to forward traffic, bi-directionally both up and down
• Vertical/local stacking and horizontal/distant stacking can be mixed for convenient 10 Gigabit deployments
(core, distribution layer, top-of-rack)
• Dual-ring architecture ensures that if a switch fails within the stack all the other switches can still communicate
with one another
• If the stack master fails, the secondary stack master takes over in less than 2 seconds for minimum packet loss
• Adding a new switch to the stack or replacing a failed unit requires no service interruption, the configuration
file is automatically pushed by the stack
Distributed LACP across the stack
• Increased performance with distributed trunks
• Greater redundancy as several switches within the trunk (up to 8 ports per trunk – 64 trunks are allowed)
• Server-to-switch distributed redundant trunking across the stack for active-active server teaming connections
Many-to-one port mirroring across the stack
• More flexibility for device troubleshooting
• As for a chassis, port mirroring is available from every port to every port across the stack
VLANs automatic propagation across the stack
• As for a chassis, VLAN port tagging or private groups are available everywhere across the stack as for a dingle
switch (unit 1, port 2; unit 2, port 3, etc.)
• No configuration required for the VLAN propagation between the switches
-5-
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S
Associated Modules and Optics
SFPs (optics)
AXM761
ProSafe 10GBase-SR
SFP+ LC GBIC
• 10 Gigabit Ethernet “short-reach” fiber connectivity
• LC duplex connector
• Fits into any 10 GE SFP+ interface (front)
• Drives 10 Gigabit Ethernet up to 300 m distances with 50/125μm laser-optimized OM3 multimode
fiber cables
• Drives 10 Gigabit Ethernet up to 33 m distances with 62.5/125μm OM1 multimode fiber cables
• 5-year Warranty
• Ordering part number: AXM761-10000S
AXM762
ProSafe 10GBase-LR
SFP+ LC GBIC
• 10 Gigabit Ethernet “long-reach” fiber connectivity
• LC duplex connector
• Fits into any 10 GE SFP+ interface (front)
• Drives 10 Gigabit Ethernet up to 10 km distances with 9/125μm SMF single mode fiber cables
• 5-year Warranty
• Ordering part number: AXM762-10000S
AXM763
ProSafe 10GBase-LRM
SFP+ LC GBIC
• 10 Gigabit Ethernet LRM “long reach multimode” fiber connectivity (802.3aq standard)
• LC duplex connector
• Fits into any 10 GE SFP+ interface (front)
• Drives 10 Gigabit Ethernet up to 220 m distances with legacy 62.5/125μm OM1 multimode fiber cables
• Drives 10 Gigabit Ethernet up to 260 m distances with 50/125μm laser-optimized OM3 multimode
fiber cables
• 5-year warranty
• Ordering part number: AXM763-10000S
AGM731F
ProSafe 1000Base-SX
SFP LC GBIC
• Gigabit Ethernet “short-reach” fiber connectivity
• LC duplex connector
• Fits into any 10 GE SFP+ interface (front)
• Drives Gigabit Ethernet up to 550 m distances with 50/125μm laser-optimized OM3 multimode fiber cables
• Drives Gigabit Ethernet up to 275 m distances with 62.5/125μm OM1 multimode fiber cables
• 5-year Warranty
• Ordering part number: AGM731F
AGM732F
ProSafe 1000Base-LX
SFP LC GBIC
• Gigabit Ethernet “long-reach” fiber connectivity
• LC duplex connector
• Fits into any 10 GE SFP+ interface (front)
• Drives Gigabit Ethernet up to 10 km distances with 9/125μm SMF single mode fiber cables
• Drives Gigabit Ethernet up to 550 m distances with 62.5/125μm OM1 or 50/125μm OM3 multimode
fiber cables
• 5-year Warranty
• Ordering part number: AGM732F
-6-
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
Associated Modules and Optics
AGM734
ProSafe 1000Base-T
SFP RJ45 GBIC
• Gigabit Ethernet RJ45 copper connectivity
• RJ45 connector
• Fits into any 10 GE SFP+ interface (front)
• Drives Gigabit Ethernet up to 100 m distances with CAT5E / CAT6 or better cables
• Supports only 1000BaseT mode, no 10BaseT/100BaseT auto-sensing
• 5-year Warranty
• Ordering part number: AGM734-10000S
AXC753
ProSafe 3m Direct
Attach SFP+ to XFP
3m SFP+ to XFP Direct Attach Cable
• Direct Attach copper cable (10GSFP+Cu)
• SFP+ connector on one side
• XFP connector on the other side
• Fits into any 10 GE SFP+ interface (front)
• XFP connector fits into any 10 GE XFP interface such as XCM8808X (Chassis Switch)
• Drives 10 Gigabit Ethernet (3 m distance)
• 5-year Warranty
• Ordering part number: AXC753-10000S
AXC761
ProSafe 1m Direct
Attach SFP+ Cable
1m SFP+ Direct Attach Cable
• Direct Attach SFP+ copper cable (10GSFP+Cu)
• SFP+ connector on both sides
• Fits into any 10 GE SFP+ interface (front)
• Drives 10 Gigabit Ethernet (1 m distance)
• 5-year Warranty
• Ordering part number: AXC761-10000S
AXC763
ProSafe 3m Direct
Attach SFP+ Cable
3m SFP+ Direct Attach Cable
• Direct Attach SFP+ copper cable (10GSFP+Cu)
• SFP+ connector on both sides
• Fits into any 10 GE SFP+ interface (front)
• Drives 10 Gigabit Ethernet (3 m distance)
• 5-year Warranty
• Ordering part number: AXC763-10000S
APS300W
ProSafe Auxiliary Power Supply
Optional Redundant Power Supply
• Provides a second redundant power supply
• Fits into the second power supply bay
• Hot-swappable
• 5-year Warranty
• Ordering part number: APS300W-10000S
AFT200
ProSafe Auxiliary Fan Tray
Spare Modular Fan Tray
• Provides a replaceable fan tray
• AFT200 contains only one fan tray with two fans
• Two fan trays are required for the switch
• 5-year Warranty
• Ordering part number: AFT200-10000S
-7-
XSM7224S
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S
TECHNICAL SPECIFICATIONS
Physical Interfaces
Front
• 24 x 10 Gigabit SFP+ ports
• All SFP+ ports support 1000 Mbps/10 GE speed
• 4 shared RJ45 auto-sensing 10GBaseT ports
• All RJ45 ports support 100 Mbps/1000 Mbps/10 GE speed
• USB port (config/firmware files storage)
• Serial RS-232 port for console
Total
• 24 x 10 Gigabit ports
Processor/Memory
•
•
•
•
•
Multi-core processor: Cavium CN5230-750 @ 750 MHz ( four cores)
System runtime memory: 512 MB (DDR2 SDRAM)
Bootram: 32-bit 8 MB flash
Packet buffer memory: 16 Mb per switch
Code storage (flash): 128 MB
Hardware Stacking
•
•
•
•
•
•
Stack height: 4 switches
4 ports used per switch
All 24-port are stack-capable
Shared RJ45 10GBaseT ports are also stack-capable
Local stacking (copper) and distant stacking (fiber) possible mix and match
Stacking performance: 80 Gbps (full duplex)
Performance Summary
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Switching fabric: 480 Gbps
Throughput: 357 Mpps
Forwarding mode: Store and Forward
Latency (64-byte frames, 1 Gbps): <4.1μs
Latency (64-byte frames, 10 Gbps): < 1.59 μs
Addressing: 48-bit MAC address
Address database size: 32,000 MAC addresses
Number of VLANs: 1,024 (IEEE® 802.1Q)
Number of multicast groups filtered (L2): 1K
Number of trunks: 64 trunks, 8-port per trunk
Number of hardware queues for QoS: 8
Number of ACLs: 100 ACLs and 16,384 rules (supporting both ingress and egress ACL)
ARP table: 6,144
Number of static routes: 64
Number of IP interfaces: 128
Number of Spanning Tree: 32
Jumbo frame support: up to 9 K packet size
Acoustic noise (ANSI-S10.12): 44 dB @ 25° C ambient temperature
Heat dissipation: 666.42 Btu/hr
Mean time between failures (MTBF): 180,178 hours (~20.5 years) @ 25° C
and 68,419 hours (~ 7.8 years) @ 55° C ambient temperature
L3 Services – Routing
•
•
•
•
L2+ static routing (subnets, VLANs)
64 static IP routes
128 IP interfaces
IP Source Guard
L3 Services - DHCP
• DHCP server (1,024 clients)
• DHCP L2 relay
• DHCP Snooping (32K bindings)
L3 Services - Multicast
• IGMP querier
L2 Services – Switching
• MAC address table: 32,000
• ARP cache size: 6,144
• Proxy ARP
• Dynamic ARP Inspection
-8-
XSM7224S
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S
L2 Services – VLANs
•
•
•
•
•
•
•
•
•
•
•
•
IEEE 802.1Q static VLAN (up to 1,024 VLANs)
IEEE 802.1v Protocol VLAN
Port-based VLAN
MAC-based VLAN
IP subnet-based VLAN
Protocol-based VLAN
Voice VLAN (based on IP phones OUIs)
Guest VLAN with IEEE 802.1x
Auto-VLAN assignment via RADIUS
IEEE 802.1 Q-in-Q (Double-VLAN tagging)
GARP with GVRP/GMRP (automatic registration for membership in VLANs or in multicast groups)
Private groups
L2 Services - Availability
•
•
•
•
•
•
IEEE 802.3ad Link Aggregation (Static or LACP) up to 64 trunks per stack and up to 8 ports per trunk
802.1AX-2008
User selectable LAG hashing algorithm (seven) for Load-Balancing
IEEE 802.1D Spanning Tree Protocol (max 32 Spanning Trees)
IEEE 802.1w Rapid Spanning Tree
IEEE 802.1s Multiple Spanning Tree
L2 Services – Multicast
• IGMP v1, v2, v3 snooping support
• IGMP querier mode support
• Static multicast filtering (1,000 multicast groups)
L2/L3/L4 Services – QoS
•
•
•
•
•
•
•
•
L2/L3/L4 Services – Security
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IPv4/IPv6 L2/L3/L4 QoS: MAC, IP, TCP/UDP ports
IEEE 802.1p Class of Service (CoS)
DiffServ QoS (RFC 2998)
Weighted round robin (WRR) queue technology
Strict priority queue technology
Ingress rate limit in 1 Kbps increments
Ingress and egress traffic
WRED (Weighted random early detection) queue management algorithm
IPv4/IPv6 Access control lists (ACL) L2/L3/L4: MAC, IP, TCP
MAC-based source/destination ACL
IP subnet-based source/destination ACL
Protocol-based source/destination ACL
ACL over VLAN
Dynamic ACLs
Time ACL
100 ACLs and 16,384 rules
Ingress and egress ACL
Network storm protection including broadcast multicast and unicast traffic
DoS configurable protection
End-to-end flow control (stand alone mode - not accross the stack)
Service-aware flow control
Data Center Mode flow control
ICMP throttling
Protected ports
Port locking
MAC filtering
Port security
DHCP snooping
IP Source Guard
Dynamic ARP inspection
RADIUS (RFC 2865)
RADIUS accounting (RFC 2866)
IEEE 802.1x port access authentication (RADIUS)
Network access control: Captive portal with internal authentication or external
RADIUS authentication
• Possible configuration of 10 captive portals
• TACACS+
• AAA IAS Users
• LLPF (Link Layer Protocol Filtering)
• IP Address Conflict Detection
-9-
XSM7224S
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S
IEEE Network Protocols
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IEEE 802.3 Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3ad Trunking (LACP)
IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED)
IEEE 802.1D Spanning Tree (STP)
IEEE 802.1s Multiple Spanning Tree (MSTP)
IEEE 802.1w Rapid Spanning Tree (RSTP)
IEEE 802.1p Quality of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1v protocol-based VLAN
IEEE 802.1X Radius network access control
IEEE 802.3x flow control
IEEE 802.1Qbb Priority-Based Flow Control
IETF RFC Standards – System Facilities
• RFC 768 UDP
• RFC 783 TFTP
• RFC 791 IP
• RFC 792 ICMP
• RFC 793 TCP
• RFC 826 Ethernet ARP
• RFC 894 transmission of IP datagrams over Ethernet networks
• RFC 896 congestion control in IP/TCP networks
• RFC 951 BOOTP
• RFC 1321 message-digest algorithm
• RFC 1534 interoperation between BOOTP and DHCP
• RFC 2131 DHCP client/server
• RFC 2132 DHCP options & BOOTP vendor extensions
• RFC 2030 Simple Network Time Protocol (SNTP) version 4 for IPv4, IPv6 and OSI
• RFC 2865 RADIUS Client (both switch and management access)
• RFC 2866 RADIUS Accounting
• RFC 2868 RADIUS attributes for Tunnel Protocol support
• RFC 2869 RADIUS Extensions
• RFC2869bis RADIUS support for Extensible Authentication Protocol (EAP)
• RFC 3164 The BSD Syslog Protocol
• RFC 3580 802.1X RADIUS usage guidelines (VLAN assignment via RADIUS,
dynamic VLAN)
IETF RFC Standards – Switching MIB
• RFC 1213 MIB-II
• RFC 1493 Bridge MIB
• RFC 1643 Ethernet-like MIB
• RFC 2233 The Interfaces Group MIB using SMI v2
• RFC 2674 VLAN MIB
• RFC 2613 SMON MIB
• RFC 2618 RADIUS Authentication Client MIB
• RFC 2620 RADIUS Accounting MIB
• RFC 2737 Entity MIB version 2
• RFC 2819 RMON Groups 1,2,3 & 9
• IEEE 802.1X MIB (IEEE 802.1-PAE-MIB 2004 Revision)
• IEEE 802.1AB – LLDP MIB
• ANSI/TIA 1057 – LLDP-MED MIB
• Private Enterprise MIBs supporting switching features
IETF RFC Standards – QOS
• RFC 2474 definition of the Differentiated Services Field (DS Field) in the IPv4 and
IPv6 headers
• RFC 2475 an architecture for differentiated services
• RFC 2597 Assured Forwarding PHB Group
• RFC 3246 An Expedited Forwarding PHB (Per-Hop Behavior)
• RFC 3260 New Terminology and Clarifications for DiffServ
• RFC 3289 Management Information Base for the Differentiated Services
Architecture (read-only)
• Private MIBs for full configuration of DiffServ, ACL and CoS functionality
- 10 -
XSM7224S
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S
IETF RFC Standards – Management
• RFC 854 Telnet
• RFC 855 Telnet Option
• RFC 1155 SMI v1
• RFC 1157 SNMP
• RFC 1212 Concise MIB Definitions
• RFC 1867 HTML/2.0 Forms with file upload extensions
• RFC 1901 Community-based SNMP v2
• RFC 1908 Coexistence between SNMP v1 & SNMP v2
• RFC 2068 HTTP/1.1 protocol as updated by draft-ietf-http-v11-spec-rev-03
• RFC 2271 SNMP Framework MIB
• RFC 2295 Transparent Content Negotiation
• RFC 2296 Remote Variant Selection; RSVA/1.0 State Management
“cookies” – draft-ietf-http-state-mgmt-05
• RFC 2576 Coexistence between SNMP v1, v2 and v3
• RFC 2578 SMI v2
• RFC 2579 Textual Conventions for SMI v2
• RFC 2580 Conformance statements for SMI v2
• RFC 3410 Introduction and Applicability Statements for Internet Standard
Management Framework
• RFC 3411 An Architecture for Describing SNMP Management Frameworks
• RFC 3412 Message Processing & Dispatching
• RFC 3413 SNMP Applications
• RFC 3414 User-based Security Model
• RFC 3415 View-based Access Control Model
• RFC 3416 Version 2 of SNMP Protocol Operations
• RFC 3417 Transport Mappings
• RFC 3418 Management Information Base(MIB) for the Simple Network
Management Protocol (SNMP)
• SSL 3.0 and TLS 1.0
- RFC 2246 The TLS Protocol, Version 1.0
- RFC 2818 HTTP over TLS
- RFC 2346 AES Ciphersuites for Transport Layer Security
• SSH 1.5 and 2.0
- RFC 4253 SSH Transport Layer Protocol
- RFC 4252 SSH Authentication Protocol
- RFC 4254 SSH Connection Protocol
- RFC 4251 SSH Protocol Architecture
- RFC 4716 SECSH Public Key File Format
- RFC 4419 Diffie-Hellman Group Exchange for the SSH
- Transport Layer Protocol
Management
•
•
•
•
•
•
LEDS
• Per port: Speed, link, activity
• Per device: Power, fan status, stack ID,
• Stack master
SNMP v1, v2c, v3 with multiple IP addresses
LLDP, LLDP-MED
Port mirroring support (many-to-one)
Flow-based mirroring
Syslog, Event log, Trap log, Email log event, ISDP
TFTP, SFTP, HTTP, SCP, or local USB flash for configuration files and firmware
upgrades
• Runtime image download (TFTP)
• Port description
• sFlow®
• Web-based graphic user interface (Prosafe Control Center web GUI)
• Command Line interface (Industrial Standard CLI: ISCLI)
• IPv6 management
• Cable test
• SSLv3/TLSv1.0 Web security for the GUI
• Secure Shell (SSHv1, v2) for CLI
• Telnet sessions for management CPU (5 sessions)
• Configurable management VLAN
• Auto-install
• Admin access control via RADIUS or TACACS+
- 11 -
XSM7224S
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S
Physical Specifications
• Dimensions (w x d x h): 440 x 431 x 43 mm (17.3 x 17 x 1.7 in)
• Weight: 6.3 kg (13.89 lb)
Power Consumption
• 195.2W maximum 100–240V AC, 50–60 Hz universal input (666.42 Btu/hr)
Environmental Specifications
Operating:
• Temperature: 32° to 122° F (0° to 50° C)
• Humidity: 90% maximum relative humidity, non-condensing
• Altitude: 10,000 ft (3,000 m) maximum
Storage:
• Temperature: – 4° to 158°F (–20° to 70°C)
• Humidity: 95% maximum relative humidity, non-condensing
• Altitude: 10,000 ft (3,000 m) maximum
SafetyElectromagnetic Emissions
and Immunity
•
•
•
•
•
•
Safety
• CE mark, commercial
• CSA certified (CSA 22.2 #950)
• UL listed (UL 1950)/cUL IEC 950/EN 60950
Package Contents
•
•
•
•
•
•
•
Warranty
• ProSafe Lifetime Warranty*
• Next business day onsite hardware replacement support, 3 years (included)**
Modules & Accessories
•
•
•
•
•
•
•
•
•
•
•
Ordering Information
Americas: XSM7224S-100NAS
Europe: XSM7224S-100EUS
Asia: XSM7224S-100AJS
ProSupport Service Packs
• OnCall 24x7, Category 4: PMB0334
• XPressHW, Category 4: PRR0334-100 (Australia only)
Layer 3 Upgrade License
• All regions
* XSM7224L-10000S (See details Page 13)
CE mark, commercial
FCC Part 15 Class A, VCCI Class A
Class A EN 55022 (CISPR 22) Class A
Class A C-Tick
EN 50082-1
EN 55024
ProSafe® 24-port Stackable 10 Gigabit L2+ Managed Switch (XSM7224S)
Power cord
Rubber footpads for tabletop installation
Rubber caps for the SFP+ sockets
Rack-mounting kit
Null-modem serial cable (RS-232) with 9-pin connector
Resource CD
AGM731F 1000BASE-SX SFP GBIC
AGM732F 1000BASE-LX SFP GBIC
AGM734 1000BASE-T RJ45 SFP GBIC
AXC753 3m SFP+ to XFP Direct Attach Cable
AXC761 1m SFP+ Direct Attach Cable
AXC763 3m SFP+ Direct Attach Cable
AXM761 10GBASE-SR SFP+ GBIC
AXM762 10GBASE-LR SFP+ GBIC
AXM763 10GBASE-LRM SFP+ GBIC (Long Reach Multimode)
APS300W ProSafe Auxiliary Power Supply
AFT200 ProSafe Auxiliary Fan Tray
- 12 -
XSM7224S
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S + XSM7224L
ADDITIONAL TECHNICAL SPECIFICATIONS, WITH LAYER 3 LICENSE UPGRADE
L3 Services – Routing
•
•
•
•
•
•
•
•
•
•
•
IPv6 Static Routing (64 IPv6 routes)
IPv4/IPv6 unicast dynamic routing
RIP v1/v2 (IPv4)
OSPF v2/v3 (IPv4)
OSPFv3 (IPv6)
Maximum OSPF LSAs (v2: 18536, v3: 9416)
OSPF equal-cost multi-path (4 - ECMP routes)
NSF OSPF Graceful Restart (RFC 3623)
VRRP 64 instances
IPv6 tunnel support
ICMPv6
L3 Services – DHCP
• IPv6 DHCP server (1,024 clients and 160 delegated prefix)
• IPv6 DHCP/ BOOTP Relay
• DNSv6 support
L3 Services - Multicast
•
•
•
•
•
•
L2 Services – Multicast
• IPv6: MLD v1, v2 snooping support
• MLD proxy
IETF RFC Standards – IPv4 Routing
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RFC 1027 Using ARP to implement transparent subnet gateways (Proxy ARP)
RFC 1256 ICMP Router Discovery Messages
RFC 1765 OSPF Database Overflow
RFC 1812 Requirements for IP Version 4 Routers
RFC 2082 RIP-2 MD5 Authentication
RFC 2131 DHCP relay
RFC 2328 OSPF Version 2
RFC 2370 The OSPF Opaque LSA Option
RFC 2453 RIP v2
RFC 3046 DHCP Relay Agent Information Option
RFC 3101 The OSPF “Not So Stubby Area” (NSSA) Option
RFC 3137 OSPF Stub Router Advertisement
RFC 3623 NSF OSPF Graceful Restart (Nonstop forwarding)
RFC 3768 VRRP – Virtual Router Redundancy Protocol
Route Redistribution across RIP, OSPF and BGP
VLAN routing
IETF RFC Standards – IPv4 Routing MIB
•
•
•
•
•
RFC 1724 RIP v2 MIB Extension
RFC 1850 OSPF MIB
RFC 2096 IP Forwarding Table MIB
RFC 2787 VRRP MIB
Private Enterprise MIB supporting routing features
IETF RFC Standards – Multicast
• RFC 1112 Host Extensions for IP Multicasting
• RFC 2236 Internet Group Management Protocol, Version 2
• RFC 2365 Administratively Scoped IP Multicast
• RFC 2710 Multicast Listener Discovery (MLD) for IPv6
• RFC 3376 Internet Group Management Protocol, Version 3
• RFC 3810 Multicast Listener Discovery Version 2 (MLDv2) for IPv6
• RFC 3973 Protocol Independent Multicast - dense mode (PIM-DM)
• RFC 4601 Protocol Independent Multicast - sparse mode (PIM-SM)
• Draft-ietf-idmr-dvmrp-v3-10 Distance Vector Multicast Routing Protocol
• Draft-ietf-magma-igmp-proxy-06 IGMP/MLD-based Multicast Forwarding
(“IGMP/MLD Proxying”)
• Draft-ietf-magma-igmpv3-and-routing-05 IGMPv3/MLDv2 and Multicast Routing
Protocol Interaction
• Draft-ietf-pim-sm-bsr-05 Bootstrap Router (BSR) Mechanism for PIM
IPv4/IPv6 multicast streams routing between VLANs, subnets or different networks
IPv4/IPv6 PIM-SM (sparse mode)
IPv4/IPv6 PIM-DM (dense mode)
Distance Vector Multicast Routing Protocol (DVMRP)
1,024 IP Multicast Groups
Neighbor discovery
- 13 -
XSM7224S
ProSafe ® 24-port 10 Gigabit Stackable L2+ Managed Switch
XSM7224S
XSM7224S + XSM7224L
IETF RFC Standards – Multicast MIB
•
•
•
•
•
•
RFC 2932 IPv4 Multicast Routing MIB
RFC 5060 Protocol Independent Multicast MIB
Draft-ietf-idmr-dvmrp-mib-11 Distance-Vector Multicast Routing Protocol MIB
Draft-ietf-magma-mgmd-mib-05 Multicast Group Membership Discovery MIB
Draft-ietf-pim-bsr-mib-06 – PIM Bootstrap Router MIB
Private Enterprise MIB supporting Multicast features
IETF RFC Standards – IPv6 Routing
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RFC 1981 – Path MTU for IPv6
RFC 2460 – IPv6 Protocol Specification
RFC 2461 – Neighbor Discovery
RFC 2462 – Stateless Auto configuration
RFC 2464 – IPv6 over Ethernet
RFC 2711 – IPv6 Router Alert
RFC 2740 – OSPFv3
RFC 3056 – Connection of IPv6 Domains via IPv4 Clouds
RFC 3315 – DHCPv6 (stateless + relay)
RFC 3484 – Default Address Selection for IPv6
RFC 3493 – Basic Socket Interface for IPv6
RFC 3542 – Advanced Sockets API for IPv6
RFC 3587 – IPv6 Global Unicast Address Format
RFC 3736 – Stateless DHCPv6
RFC 4213 – Basic Transition Mechanisms for IPv6
RFC 4291 - Addressing Architecture for IPv6
RFC 4443 – ICMPv6
IETF RFC Standards – IPv6 Routing MIB
• RFC 2465 – IPv6 MIB
• RFC 2466 – ICMPv6 MIB
350 E. Plumeria Drive
San Jose, CA 95134-1911 USA
1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
© 2011 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, Connect with Innovation, ProSafe, NETGEAR Green and Smart Wizard are trademarks and/or registered trademarks of NETGEAR, Inc. and/or subsidiaries in the United States and/or other countries. Mac and the Mac logo
are trademarks of Apple, Inc., registered in the U.S. and other countries. Other brand names mentioned herein are for identification purposes
only and may be trademarks of their respective holder (s). Information is subject to change without notice. All rights reserved.
*Basic technical support provided for 90 days from date of purchase.
** See http://onsite.netgear.com for coverage, availability and terms and conditions.
D-XSM7224S-4
- 14 -