Plastic- Cleaner
Cleaner for plastic surfaces
Properties
* Cleaning agent for use with high pressure cleaner or for manual cleaning
* for cleaning oil, grease and mineral soiling
* very gentle to materials
* manual applicable
* easily biodegradable in accordance with OECD guidelines
* pH- value in concentrate approx. 10
* clear, yellow liquid with fresh odour
Fields of application:
* window frames
* garden furniture
* plastic floors
* plastic surfaces
* all water resistant surfaces
Processing:
pre-dilution
dosage
temperature
1+10
pre-dilution
up to 40°C
pure
pre-dilution
up to 40°C
* high pressure cleaning
1+3
1-5%
up to 60°C
heavy soiling
pure
1-5%
up to 60°C
* manual normal soiling
heavy soiling
Economy:
1 l Plastic Cleaner is sufficient for cleaning of approx. 40 m², presolved 1+3, dosage 4% at
the high-pressure appliance, medium soiled area.
Handling:
pre-dilution: first measure the necessary amount of water, then add Plastic Cleaner under
stirring and mix properly.
Remarks:
* store frostfree
1/2
12/2003
Plastic- Cleaner
Attention:
S 2 Keep out of the reach of children
S 23 Do not breathe aerosol
Further information:
* Material safety data sheet
Process:
Object: e.g. plastic floor
* make predilution: mix 1 L Plastic Cleaner with 3 L of water (at medium soiling)
* dosage approx. 5% at the high pressure cleaner, temperature up to 60°C
* clean the floor in steady and overlapping traces
* rinse with clear water
Alfred Kärcher GmbH & Co.
Quality cleaning systems
Friedrich-List-Straße 4
D-71364 Winnenden
Phon (0 71 95) 9 03 - 0
Fax (0 71 95) 9 03 - 28 05
http://www.karcher.com
2/2
12/2003