Waxing and Drying Aid
spray wax for all painted surfaces
Properties:
* for use in KÄRCHER high pressure cleaner
* fast drying of the car paint after the cleaning
* long lasting shine and preservation of paintwork
* for all automobile paints
* pH value approx. 5 in concentrate
* milky liquid with fresh odour
Fields of application:
* metallic paints
* paints
Processing:
- fill Waxing and Drying Aid undiluted in the tank of the high pressure cleaner
- dosing 1-3%, apply with low pressure
- do not spray on disks
- rinse with clear water in the high pressure stream for a short time
- go over the car with a chamois
Economy
1 L is sufficient for approx. 3-5 car washes.
Remarks:
* usable for new paints, wich are basic cleaned.
* avoid overdosing
1/2
RM 595/3, 10/2006
Waxing and Drying Aid
Attention:
S 2 Keep out of the reach of children.
S 23 Do not breathe spray
Further Information:
* Material safety data sheet
Process:
Object: e.g. car paint
* first prespray the car with RM 555, let react for 2 minutes
* clean with a high pressure stream, if necessary with a rotating wash brush
* fill Waxing and Drying Aid undiluted in the tank of the high pressure cleaner
* dosing 1-3%, apply with low pressure
* rinse with clear water with the high pressure stream
* go over the car with a chamois
Alfred Kärcher GmbH & Co. KG
Alfred-Kärcher-Str. 28-40
D-71364 Winnenden
Phone +49 (7195) 14-0
Fax +49 (71 95) 14 - 2212
http://www.karcher.com
2/2
RM 595/3, 10/2006