PRIMERGY TX150 S7
System configurator and order-information guide
June 2012
Contents
Instructions
Configuration diagram
Configurator
Software Configurator 32-bit and 64-bit
I Basic unit
II Processor
III Memory
IV Graphics
V Energy Star restrictions
VI Accessible drives
VII Hard disk drives
VIII SAS / SCSI Controller
IX Disk array
X Communication/Network
XI System management options
XII Miscellaneous
XIII Country specific power cords
Change report
PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
Instructions
This document contains basic product and configuration information that will enable you to configure your system via
PC-/ System-Architect.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
You can configure your individual PRIMERGY server in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through
the configurator by following the lines from the top to the bottom.
Section
III
Memory, example
There are X memory slots which can be equipped with XXX MB.
It is permissible to make up to X passes through the memory upgrade options.
S26361-XXX-XXX
Memory XXX MB
S26361-XXX-XXX
Memory XXX MB
max. X times per system
max. X times per system
X times
In one chapter you can only select as many components (here 4x) as the arrow indicates.
4x
Please note that there are information symbols which indicate necessary information.
Further information in the internet see:
http://ts.fujitsu.com/products/standard_servers/index.html
(internet)
https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx
(extranet)
Prices and availability see price list and PC-/ System-Architect
Subject to change and errors excepted
Fujitsu Technology Solutions x86 PRIMERGY Server
2 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
Configuration diagram PRIMERGY TX150 S7 SATA LFF (3.5") System Unit
System unit ( I )
SIDE VIEW
FRONT VIEW
3 x HH 5.25" free or
2 x HH 5,25" free + Option A
Standard Power Supply
or
PS (I)
5.25" x 1.6"
1. PSU
2. PSU
Redundant power supply option
5.25" x 1.6"
Processor ( II )
5.25" Slim Line
System Fan
Intel CPU
(Dual-or Quad Core)
I/A
II / A
III / A
LSP/LSD Option
I/B
II / B
III / B
Accessible drives ( V )
Mounting Kit DVD(sl) + LSP/LSD: (Option A)
- support for SL (0.5") DVD Drive + LSP /LPD
Memory ( III )
each Clarkdale CPU offers 2 Banks (I, II) with 2 Channels each
each Lynnfield CPU offers 3 Banks (I, II, III) with 2 Channels each
(Local Service Panel / Local Service Display)
- occupies one 5.25" bay
one DVD (slim line or standard) is mandatory
6.)
max. 6 PCI-Busses
Extension slots
SAS Controller ( VII )
Disk Array ( VIII )
Communication/Network ( IX )
Miscellaneous ( X )
Hard disk drives ( VI )
Slot 6 ( 3,3V ): PCIe x8, short
lp ready
Slot 5 ( 3,3V ): PCIe x8, short
Slot 4 ( 3,3V ): PCIe x4 (wired x1), short
notched, possible to plug x8cards; lp ready
Slot 3 ( 3,3V ): PCIe x4 (wired x1), short
notched, possible to plug x8cards;
4x 3,5" HDD Frame
3.)
4.)
5.)
3.5"x1" SATA
3.5"x1" SATA
3.5"x1" SATA
2.)
Slot 2 ( 3,3V ): PCIe x8 (wired x4), long
lp ready
1.)
3.5"x1" SATA
Slot 1 ( 5V ): PCI 32-Bit / 33MHz, long
Key:
A PCIe x4 card can also be plugged in a PCIe x8 slot
Included in basic unit
A PCIe x8 card can be plugged in the notched slots no. 3 and 4
Option
PCI and PCI-X slots are mechanically not compatible to PCIe slots!
Fujitsu Technology Solutions x86 PRIMERGY Server
3 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
Configuration diagram PRIMERGY TX150 S7 SAS LFF (3.5") System Unit
System unit ( I )
SIDE VIEW
FRONT VIEW
3 x HH 5.25" free or
2 x HH 5,25" free + Option A
Standard Power Supply
or
PS (I)
5.25" x 1.6"
1. PSU
2. PSU
Redundant power supply option
5.25" x 1.6"
Processor ( II )
5.25" Slim Line
System Fan
Intel CPU
(Dual-or Quad Core)
I/A
II / A
III / A
LSP/LSD Option
|
I/B
II / B
III / B
Accessible drives ( V )
Mounting Kit DVD(sl) + LSP/LSD: (Option A)
- support for SL (0.5") DVD Drive + LSP /LPD
Memory ( III )
each Clarkdale CPU offers 2 Banks (I, II) with 2 Channels each
each Lynnfield CPU offers 3 Banks (I, II, III) with 2 Channels each
(Local Service Panel / Local Service Display)
- occupies one 5.25" bay
one DVD (slim line or standard) is mandatory
6.)
max. 6 PCI-Busses
Extension slots
SAS Controller ( VII )
Disk Array ( VIII )
Communication/Network ( IX )
Miscellaneous ( X )
Hard disk drives ( VI )
Slot 6 ( 3,3V ): PCIe x8, short
lp ready
Slot 5 ( 3,3V ): PCIe x8, short
Slot 4 ( 3,3V ): PCIe x4 (wired x1), short
notched, possible to plug x8cards; lp ready
Slot 3 ( 3,3V ): PCIe x4 (wired x1), short
notched, possible to plug x8cards;
4x 3,5" HDD Frame
3.)
4.)
5.)
3.5"x1" SAS / SATA
3.5"x1" SAS / SATA
3.5"x1" SAS / SATA
2.)
Slot 2 ( 3,3V ): PCIe x8 (wired x4), long
lp ready
1.)
3.5"x1" SAS / SATA
Slot 1 ( 5V ): PCI 32-Bit / 33MHz, long
A mix of SAS and Eco SATA HDDs is not allowed!
Key:
A PCIe x4 card can also be plugged in a PCIe x8 slot
Included in basic unit
A PCIe x8 card can be plugged in the notched slots no. 3 and 4
Option
PCI and PCI-X slots are mechanically not compatible to PCIe slots!
Fujitsu Technology Solutions x86 PRIMERGY Server
4 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
Configuration diagram PRIMERGY TX150 S7 SAS / SATA SFF (2.5") System Unit
System unit ( I )
SIDE VIEW
FRONT VIEW
3 x HH 5.25" free or
2 x HH 5,25" free + Option A
Standard Power Supply
or
PS (I)
5.25" x 1.6"
1. PSU
2. PSU
Redundant power supply option
5.25" x 1.6"
Processor ( II )
5.25" Slim Line
System Fan
Intel CPU
(Dual-or Quad Core)
I/A
II / A
III / A
LSP/LSD Option
I/B
II / B
III / B
Accessible drives ( V )
Mounting Kit DVD(sl) + LSP/LSD: (Option A)
- support for SL (0.5") DVD Drive + LSP /LPD
Memory ( III )
each Clarkdale CPU offers 2 Banks (I, II) with 2 Channels each
each Lynnfield CPU offers 3 Banks (I, II, III) with 2 Channels each
(Local Service Panel / Local Service Display)
- occupies one 5.25" bay
6.)
max. 6 PCI-Busses
Extension slots
one DVD (slim line or standard) is mandatory
SAS Controller ( VII )
Disk Array ( VIII )
Communication/Network ( IX )
Miscellaneous ( X )
Hard disk drives ( VI )
Slot 6 ( 3,3V ): PCIe x8, short
lp ready
8x SFF HDD Frame
5.)
2.5" (SFF) SAS / SATA
2.5" (SFF) SAS / SATA
Slot 5 ( 3,3V ): PCIe x8, short
2.5" (SFF) SAS / SATA
4.)
2.5" (SFF) SAS / SATA
Slot 4 ( 3,3V ): PCIe x4 (wired x1), short
notched, possible to plug x8cards; lp ready
2.5" (SFF) SAS / SATA
1.)
2.)
3.)
2.5" (SFF) SAS / SATA
2.5" (SFF) SAS / SATA
Slot 3 ( 3,3V ): PCIe x4 (wired x1), short
notched, possible to plug x8cards;
2.5" (SFF) SAS / SATA
Slot 2 ( 3,3V ): PCIe x8 (wired x4), long
lp ready
A mix of SAS and SATA is not allowed!
Slot 1 ( 5V ): PCI 32-Bit / 33MHz, long
Key:
A PCIe x4 card can also be plugged in a PCIe x8 slot
Included in basic unit
A PCIe x8 card can be plugged in the notched slots no. 3 and 4
Option
PCI and PCI-X slots are mechanically not compatible to PCIe slots!
Fujitsu Technology Solutions x86 PRIMERGY Server
5 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
Start PRIMERGY TX150 S7
SW Configurator IA32
with OEM-Software
without OEM-Software
for PRIMERGY Server
for PRIMERGY Server
OEM-SW is bound to HW and
is not allowed to be ordered
separately.
For all SW products please refer to the corresponding software configurator accessible via
the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.
Microsoft - Software: **)
- Small Business Server 2003
- Windows Server 2003 R2,
Standard Edition
PRIMECLUSTER *)
- Clustering
- Load Balancing
Enterprise Edition
! Web Edition, SP2/English
- Additional loose
Client-Access-Licenses (CALs)
(not for Web Edition)
Linux - Software: **)
- Open Enterprise Server ***)
- SuSE Linux ES (OEM): LO
- SuSE Linux ES (Support): LS
- Red Hat EL (OEM): LO
- Red Hat EL (Support): LS
Manageability Software: V**)
- iRMC2 advanced Pack
Details eg. version numbers are published
in the separate SW-Configurator
- RemoteDeploy
'- Altiris Server Deployment
**) Pay attention to release and order information in PRINCE -> Operating System
Backup-Software /
Application-Software: U
https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx
- ARCserve
- openSM2
They find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users:
for partners:
http://sp.ts.fujitsu.com/dmsp/docs/osrel.xlsx
https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx
Continue with PRIMERGY
HW configurator
Fujitsu Technology Solutions x86 PRIMERGY Server
6 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
Start PRIMERGY TX150 S7
SW Configurator EM64T
with OEM-Software
without OEM-Software
for PRIMERGY Server
for PRIMERGY Server
OEM-SW is bound to HW and
is not allowed to be ordered
separately.
For all SW products please refer to the corresponding software configurator accessible via
the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.
only
EM64T
Microsoft - Software: W
- Windows Server 2008,
Standard x64 Edition
Enterprise x64 Edition
- Additional loose
Client-Access-Lizenzen (CALs)
Linux - Software *) **)
only
- SuSE Linux ES (OEM): LO
x86_64 - SuSE Linux ES (Support): LS
- Red Hat EL (OEM): LO
- Red Hat EL (Support): LS
Details eg. version numbers are published
in the separate SW-Configurator
Manageability Software: V**)
- iRMC2 advanced Pack
- RemoteDeploy
**) Pay attention to release and order information in PRINCE -> Operating System
https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx
You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users:
for partners:
http://sp.ts.fujitsu.com/dmsp/docs/osrel.xlsx
https://partners.ts.fujitsu.com/com/products/servers/primergy/Pages/default.aspx
Continue with PRIMERGY
HW configurator
Fujitsu Technology Solutions x86 PRIMERGY Server
7 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
Start PRIMERGY TX150 S7
I
Section
Basic unit
System unit, Rack and Floorstand, including:
* Two lockable front covers in floorstand version
Door #1 for accessible drive bays
Door #2 for hot plug HDD bays
Both doors may be locked or door #1 may be left open while door #2 is still locked
* backplane with 4 bays for hot-plug HD's. Type depending on base unit:
Type 1: 4x hot plug LFF (3.5") SAS/SATA HDD (SAS/SATA LFF base units only)
Type 2: 8x hot plug SFF (2.5") SAS or SATA HDD (SAS SFF base units only)
* 1 power supply (Standard Ps with 350W or hot plug PSU with 450W)
in addition there is an upgrade to hot plug redundant PSU available
* System fan ( No Hot-plug, No redundancy )
* 3 bays 5.25" for accessible drives (half Hight)
Systemboard D2759 with:
* heat pipe for the CPU
* Chipset Intel® 3420(codenamed Foxhollow Ibexpeak)
* 6 PCI slots:
2 x PCIe x8 Gen2
2 x PCIe x1 (x4 connected, slit for x8 usage) Gen2
1 x PCIe x4 (x8 connected) Gen2
1 x 32Bit / PCI 33MHz, ( 5V )
* 6 memory slots for max. 24GB with 6x 4GB registered DDR3 RAM or
max. 16GB with 4GB unbuffered DDR3 RAM available
- Memory is divided into 6 DIMMs per CPU ( 2 channels with 3 slots per channel )
- Max. 3 registered modules or 2 unbuffered modules are possible per channel
- No mix of registered and unbuffered modules is allowed
- First Memory ( one module ) has to be selected for an orderable basic unit
- Memory upgrade is possible module wise
- SDDC (Chipkill) is not supported
* SATA-Controller on board (supporting RAID 0/1)
* 1 Gbit Ethernet LAN on board ( Intel Hartwell ) with ToE;
and iSCSI boot integrated in System BIOS as selectable option
* iRMC S2 (integrated Remote Management Controller) on-board server management controller
with dedicated 10/100 Service LAN-port and
integrated graphics controller ( max. Resolution: 1600 x 1200 at 16 bpp)
Interfaces:
* 1x RS-232-C (9-pin) (usable for BMC or OS or shared)
* 1x RS-232-C (serial, 9pin), as option
* 1x VGA (15 pin)
* 10x USB 2.0 ( UHCI ) with 480MBit/s (4x external at the rear, 3x external at the frontside,
3x internal USB Interfaces for backup devices, uSSD and internal memory stick, no USB wakeup)
* 1x LAN RJ45, 1x Service-LAN RJ45 switchable
*internal Cables:
1. SATA cable for BD/DVD.
2. Cable for HDD Backplane
* ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates
* Documentation engl. (multilingual on CD)
A
Fujitsu Technology Solutions x86 PRIMERGY Server
8 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
A
Floorstand-version
Rack-version (5U)
Basic unit without CPU and Memory
- One CPU ( first CPU ) has to be configured
additionally for a base configuration
- One memory kit has to be configured
for a base configuration
Basic unit without CPU and Memory
Including 1 power cord with inlet connector
for non-heating apparatus
- One CPU ( first CPU ) has to be configured
additionally for a base configuration
- One memory kit has to be configured
for a base configuration
SAS/SATA LFF (3.5") Floorstand-version with:
SAS/SATA LFF (3.5") Rack-version with:
- 4-port SAS backplane for 4 hot plug
LFF (3.5") SAS/SATA HDDs incl. cables for connection
to the onboard SATA or plug in SAS controller
- SAS/SATA LFF (3.5") Base Unit
- 4-port SAS backplane for 4 hot plug
LFF (3.5") SAS/SATA HDDs incl. cables for connection
to the onboard SATA or plug in SAS controller
- SAS/SATA LFF (3.5") Base Unit
standard PSU
S26361-K1265-V101
hot plug PSU
S26361-K1265-V201
SAS SFF (2.5") Floorstand-version with:
hot plug PSU
SAS SFF (2.5") Rack-version with:
- 8-port SAS backplane for 8 hot
plug SFF (2.5") SAS HDDs incl. cables for connection
to the plug in SAS controller
- SAS SFF (2.5") Base Unit
standard PSU
hot plug PSU
S26361-K1265-V601
- 8-port SAS backplane for 8 hot
plug SFF (2.5") SAS HDDs incl. cables for connection
to the plug in SAS controller
- SAS SFF (2.5") Base Unit
hot plug PSU
S26361-K1265-V801
S26361-K1265-V301
S26361-K1265-V401
S26361-F3552-E1
S26361-F3552-E1
TPM Module
TPM Module
Trusted Platform Module on Motherboard
Trusted Platform Module on Motherboard
Use according to import restrictions
Use according to import restrictions
max. 1x per system
max. 1x per system
B1
B2
The LFF Base Units offer onboard SATA
functionality for up to 4 HDD.
An additional SAS controller is required
if you need support for SAS HDD.
S26361-F3552-L1
TPM Module add-on kit
for later integration (loose delivery)
Trusted Platform Module on Motherboard
Use according to import restrictions
max. 1x per system
Be aware of import restrictions!
Only 1 TPM per system.
Loose delivery for later
integration possible for customer.
Fujitsu Technology Solutions x86 PRIMERGY Server
9 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
B1
B2
S26361-F2735-E111
S26361-F2735-E202
No Rackmount-Kit option
RMK-F2_3-XU SERVER
S26361-F2735-L202
Only for loose deliveries
telescopic rail, full extraction,
RMK-F2_3-xU-Servers_13mm-Drop-in Rails
No mounting in Racks possible
1-hand-mounting
for loose delivery
max. 1x per system
consisting of
S26361-F2735-L31
- 1 pair of telescopic rails
Adapter angle till 50Kg MUST be
with easy-mounting-clips
ordered for PC/DC-Rack's additionally.
- 1 bracket DC-PC-3rd-Rack
1x per system
S26361-F2735-L202
RMK-F2_3-XU SERVER
for loose delivery
S26361-F2735-E7
S26361-F2201-E20
Cable management PC-Rack
Cable arm 3rd P-Rack
S26361-F2735-L7
- for Primecenter /
- for 3rd party
Cable management PC-Rack
Datacenter Racks
1x per system
for loose delivery
- not for 3rd party
1x per system
S26361-F2201-L20
Cable arm 3rd party racks
for loose delivery
PRIMERGY PRIMECENTER-rack
SNP:SY-F1647E301-P
Installation ex works for one
server or subsystem.
Hereby the rack will be delivered
completely pre-mounted and
all wired connections are tested.
With racks 12U, 24U, 38U:
"Rack-mounting ex factory"
Systems and components
This service is to be ordered once
will be delivered installed in the rack
per installable server/storage
With racks 46U:
subsystem, in order to get the
Systems and components
server/storage subsystem
will be delivered separately
mounted into the PRIMERGY racks.
To be ordered only together with
In case of the 46 U PRIMERGY Rack,
a PRIMERGY PRIMECENTER rack
this service has to be ordered,
e.g.:
to get the mounting kits and the
S26361-K826-V10x
cables installed.
refer configurator PC-Rack
max. 1x per System
For later conversion the following kits are available:
FSC PC-/DC-/3rd party- Rack
1.) Conversion kit 2 Floor -> Rack
S26361-F2618-L260
Conversion PRIMERGY TX150 S7 base unit floorstand into
base unit rack with 5U. Only conversion, no mounting kit.
plus
Mounting kit has to be ordered seperatly
2.) Mounting Kit FSC PC-/DC-/3rd party- Rack
S26361-F2735-L202
no cable management
S26361-F2735-L31
This kit will fit in server racks
and
conforming to EIA standards EIA-310-D for 19" racks.
Adapter angle for servers up to 50kg MUST
be ordered for PC/DC-Rack's additionally.
3.) cable management or cable arm
to be ordered additionally
FSC PC-/DC- Rack cable management
3rd party- Rack cable arm
either one to be ordered
or
S26361-F2735-L7
or
S26361-F2201-L20
For Base Units with hot plug PSU only (V201, V401, V601, V801)
S26113-F540-E11
2nd power supply module (PSU)
for redundancy
occupies one bay for
hot plug power supply
max. 1x per system
Floorstand Versions
A second, redundant power supply requires an additional power cord (section XIII)
For later conversion of basic units with standard power supply
to hot plug power supply, the following kit is available:
1.) hot plug PS upgrade kit, incl. 1 PS module + cable:
S26113-F540-L1
Conversion standard into hot plug PS
2.) Supplementary power supply module
for redundancy or repair
S26113-F540-L11
C
Fujitsu Technology Solutions x86 PRIMERGY Server
10 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
C
II
Section
Processor
One of following CPU´s has to be selected
for an orderable basic unit
Dual-Core CPU`s
- 1x 64-bit Intel
Celeron (2MB SLC), Pentium (3MB SLC) or
Core-i3 (4MB SLC)
occupies socket for one CPU
Pentium G6950 2.80GHz 3MB 2C 1066MHz (73W)
Core i3-530 2.93GHz 4MB 2C/4T 1333MHz (73W)
Core i3-540 3.06GHz 4MB 2C/4T 1333MHz (73W)
Core i3-550 3.20GHz 4MB 2C/4T 1333MHz (73W)
S26361-F3588-E280
S26361-F3587-E293
S26361-F3587-E306
S26361-F3587-E320
on special release
on special release
Quad-Core XEON CPU`s
- 1x 64-bit Intel Xeon UP (8MB shared TLC = Third Level Cache)
Hyper-Threading (HT not with X3430); 1333 MHz DDR3 Bus and heat pipe
occupies socket for one CPU
Xeon X3430 2.40GHz 8MB 4C/4T 1333MHz Turbo (95W)
S26361-F3578-E343
Xeon X3440 2.53GHz 8MB 4C/8T 1333MHz Turbo (95W)
S26361-F3578-E344
Xeon X3450 2.66GHz 8MB 4C/8T 1333MHz Turbo (95W)
S26361-F3578-E345
Xeon X3460 2.80GHz 8MB 4C/8T 1333MHz Turbo (95W)
S26361-F3578-E346
Xeon X3470 2.93GHz 8MB 4C/8T 1333MHz Turbo (95W)
S26361-F3578-E347
Xeon X3480 3.06GHz 8MB 4C/8T 1333MHz Turbo (95W)
S26361-F3578-E348
on special release
on special release
Low Voltage Xeon CPU`s
- 1x 64-bit Intel Xeon LV UP (4/8MB shared TLC = Third Level Cache)
Hyper-Threading (HT); 1066 or 1333 MHz DDR3 Bus and heat pipe
occupies socket for one CPU
Xeon L3406 2.26GHz 4MB 2C/4T 1066MHz Turbo (30W)
S26361-F3586-E226
Xeon L3426 1.86GHz 8MB 4C/8T 1333MHz Turbo (45W)
S26361-F3586-E186
III
Section
Memory
There are 6 memory slots to be used for max. 6 registered DIMMS or max. 4 unbuffered DIMMS.
Registered DIMMS are configurable for XEON CPUs only
=> max. 24GB registered DDR3 RAM for RDIMMs with 4GB moduels
=> max. 16GB unbuffered DDR3 RAM for UDIMMs with 4GB moduels
Minimum one memory module or order code = first memory
Registered (reg) RDIMMs
Unbuffered (ub) UDIMMs
4x / 6x
- One DDR3- ub ECC memory module
- One DDR3 reg ECC memory module
1GB 1333 SR
S26361-F3335-E513
2GB 1333 SR/DR
S26361-F3335-E514
4GB 1333 DR
S26361-F3335-E515
Choose up to 4 order codes above.
2GB 1333 SR/DR
S26361-F3336-E514
4GB 1333 DR
S26361-F3336-E515
8GB 1066 QR
S26361-F3336-E516
max 6x
max 6x
max 4x
Choose up to 4 / 6 order codes above
for 4C CPU type only !
not for Pentium, Core i3, Celeron and Xeon L3406
Unbuffered UDIMMs cannot be mixed with registered RDIMMs
IV
Section
Graphics
Graphics controller integrated in iRMC2 (integrated Remote Management Controller)
( max. Resolution: 1600 x 1200 at 16bpp )
S26361-F2748-E537
PY VGA LP card 512MB PCI-e x1
NVIDIA NVS300
512 MB PCIe-x1
2x DVI or 2x VGA or
1x DVI plus 1x VGA
cables adapters included
Dual head + fully 3-D
supported for Windows OS
only native driver support for Linux OS
full high bracket
max. 1x per system
The hight end optional NVIDIA NVS300 graphic card offers dual head operation
and fully 3D video support.
The cables for either two times DVI or VGA connections are part of the delivery.
Remote Video direction via iRMC must be disabled.
This PCIe-x1 card can also be installed in any PCIe-x4, x8 or x16 slot.
Only one card per server is allowed.
PY VGA card must be installed in slot 4
S26361-F2748-L537
PY VGA LP card 512MB PCI-e x1
for loose delivery
D
Fujitsu Technology Solutions x86 PRIMERGY Server
11 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
Section
V
Energy Star
S26361-F3301-E151
TX150S7 E-Star Fam1
S26361-F3301-E152
TX150 S7 E-Star Fam2
for all dual core CPUs with std. PSU
for all quad core CPUs with red. PSU
Limits configuration in accordance
Limits configuration in accordance
with Energy Star requirements
with Energy Star requirements
max. 1x per system
max. 1x per system
Please select
Estar Fam1 for all base units with std PSU: S26361-K1265-V101 or -201 or
Estar Fam2 for all base units with red PSU: S26361-K1265-V201, -V401, -V601 or -V801
All following order units are not allowed
together with TX150S7 E-Star Fam1:
All following order units are not allowed
together with TX150S7 E-Star Fam2:
Xeon X3430
S26361-F3578-E343
Celeron G1101
S26361-F3589-E226
Xeon X3440
S26361-F3578-E344
Pentium G6950
S26361-F3588-E280
Xeon X3450
S26361-F3578-E345
Core i3-530
S26361-F3587-E293
Xeon X3460
S26361-F3578-E346
Core i3-540
S26361-F3587-E306
Xeon X3470
S26361-F3578-E347
Core i3-550
S26361-F3587-E320
Xeon X3480
S26361-F3578-E348
Xeon L3406
S26361-F3586-E306
Xeon L3426
S26361-F3586-E186
Memory 1GB ub.
S26361-F3335-E226
All following components are not allowed together with any Energy Star certification!
If you need one of them, please cancel the Energy star order component!
Tape Drives w. Controller
USB Tape Drives
S26361-F3257-E4
S26361-F3324-E4
4 port SAS RAID Controller
Tape drive DDS Gen5 USB 5.25"
S26361-F3626-E1/-F3627-E1
S26361-F3325-E4
Tape drive LTO4/5HH Ultrium SAS
Tape drive DDS Gen6 USB 5.25"
S26361-F3561-E4
S26361-...
Tape drive LTO3HH Ultrium SAS
Tape drive DDSGen7 USB 5.25"
S26361-F4009-E4
S26361-F3857-E4
Tape drive LTO2HH Ultrium SAS
RDX drive USB 5.25" internal
LAN Controller
Controller for ext. Backup or SAS
S26361-F3462-E1
S26361-F3270-E1
Gigabit Ethernet Quad 1000TX
SCSI U320 Controller
S26361-F3555-E1
S26361-F3271-E1
10 Gigabit Eth. Contr. 2port SFP+
8port SAS
S26361....(Wasat)
3,5" SAS HDDs
8 port SAS RAID Controller
S26361-F3291-E514
HD 146GB 15krpm 3.5"
VGA Card
S26361-F4005-E530
S26361-F2748-E533
HD 300GB 15krpm 3.5"
PY VGA card 256MB PCI-e x1
S26361-F4005-E545
HD 450GB 15krpm 3.5"
S26361-F4005-E560
HD 600GB 15krpm 3.5"
Fujitsu Technology Solutions x86 PRIMERGY Server
12 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
D
VI
Section
Accessible drives
There are 3 bays (1.6" x 5.25") for accessible drives.
S26361-F2826-E204
Mounting Kit DVD(sl) + LSP/LSD
Occupies one 5.25" x 1.6" bays
in the accessible bay area
Offers bays for:
see Conf. diagram
Option A
- 1x LSP/LSD option
- 1x 0.5 * 5.25" SATA DVD
max. 1x per system
S26361-F2557-E202
Local Service Panel incl. ad.
Customer Self Service
LSP module incl. adapter
0.5" x 5.25"
max. 1x per System
S26361-F2557-E105
Local Service Display incl. ad.
Customer Self Service
LSD module incl. adapter
0.5" x 5.25"
max. 1x per System
S26361-F3641-E2
Blu-ray Triple Writer slim SATA
6x BD-RW, 8x DVD, 24x CD
BD DL and all CD/DVD formats
0.5 x 5.25"
max. 1x per system
S26361-F3266-E2
DVD-ROM HH SATA
16x DVD 48x CD
1.6 x 5.25", black bezel
max. 1x per system
S26361-F3267-E2
DVD-RW supermulti HH SATA
all formats, DUAL/DL, DVD-RAM
only W2K, W3K and Linux
1.6 x 5.25", black bezel
max. 1x per system
S26361-F3531-E2
Blu-ray Combo slim SATA
6x BD-ROM, 16x DVD, 40x CD
BD DL and all CD/DVD formats
0.5 x 5.25", black bezel
max. 1x per system
S26361-F3530-E2
Blu-ray Combo HH SATA
6x BD-ROM, 16x DVD, 40x CD
BD DL and all CD/DVD formats
1.6 x 5.25", black bezel
max. 1x per system
Following USB Components are available
1) USB DVD SM / Blu-Ray
External SuperMulti Drive (as soon as released)
External Blu-Ray Drive (as soon as released)
2) USB Keyboard:
KBPC PX D, professional keyboard
3) USB Mouse:
Optical Wheel Mouse Tilt USB/PS2
4) USB Memorybird:
MyUSBS A910 8GB
MyUSBS A910 16GB
S26361-F3269-E2
DVD-RW supermulti slim SATA
all formats, DUAL/DL, DVD-RAM
only W2K, W3K and Linux
0.5 x 5.25", black bezel
max. 1x per system
S26361-F3585-E2
Blu-ray Triple Writer HH SATA
4x BD-RW, 16x DVD, 40x CD
BD DL and all CD/DVD formats
1.6 x 5.25", black bezel
max. 1x per system
S26341-F103-L119
S26341-F103-L120
S26381-K340-V120
S26381-K415-L100
S26391-F6048-L208
S26391-F6048-L216
E
Fujitsu Technology Solutions x86 PRIMERGY Server
13 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
E
internal backup devices
S26361-F3257-E4
4 port SAS RAID Controller
LSI
MegaRAID SAS 1064
no Cache, no BBU
RAID 0, 1 & 1E
SAS 3Gb/sec
4 internal ports
PCIe x4, 160mm
max. 1x per system
1x
1x
S26361-F4009-E4
Tape drive LTO2HH Ultrium SAS
200GB, 24MB/s, SAS 3Gb
Connector: mini-SAS
incl. SAS cable
incl. description (Ger/US)
cleaning cartridge
1.6 * 5.25", black bezel
max. 1x per system
S26361-F3561-E4
Tape drive LTO3HH Ultrium SAS
400GB, 60MB/s, SAS 3Gb
Connector: mini-SAS
incl. SAS cable
incl. description (Ger/US)
cleaning cartridge
1.6 * 5.25", black bezel
max. 1x per system
S26361-F3626-E1
Tape drive LTO4HH Ultrium
800GB, 120MB/s, SAS 3Gb
Connector: mini-SAS
incl. SAS cable
incl. description (Ger/US)
cleaning cartridge
1.6 * 5.25"
max. 1x per system
S26361-F3324-E4
Tape drive DDS Gen5 USB 5.25"
36GB, 3MB/s, USB 2.0
Connector: USB "B"
with USB cable
incl. description (Ger/US)
cleaning cartridge
1.6 * 5.25", black bezel
max. 1x per system
S26361-F3325-E4
Tape drive DDS Gen6 USB 5.25"
80GB, 6MB/s, USB 2.0
Connector: USB "B"
with USB cable
incl. description (Ger/US)
cleaning cartridge
1.6 * 5.25", black bezel
max. 1x per system
S26361-F3857-E4
RDX drive USB 5.25" internal
80-320GB, 25MB/s, USB 2.0
Connector: USB "B"
with USB cable
incl. description (Ger/US)
without RDX cartridges
1.6 * 5.25", black bezel
max. 1x per system
S26361-F3627-E1
Tape drive LTO5HH Ultrium SAS
1500GB, 140MB/s, SAS 6Gb
Connector: mini-SAS
incl. SAS cable
incl. description (Ger/US)
cleaning cartridge
1.6 * 5.25", black bezel
max. 1x per system
SCSI Controller for external backup Drives
S26361-F3270-E1
SCSI U320 Controller
Adaptec SCSI Card ASC-29320LPE (Colonial)
1 channel: LVD
LVD connect. for HD, without cable
PCIe
max. 1x per system
RDX cartridges must be ordered separately
RDX 160GB = S26361-F3857-L160
RDX 320GB = S26361-F3857-L320
RDX 500GB = S26361-F3857-L500
RDX 1TB = S26361-F3857-L600
10x RDX160 = S26361-F3857-L169
10x RDX320 = S26361-F3857-L329
SAS Controller for external backup drives (FiberCat TXF)
S26361-F3271-E1
8port SAS
LSI3442E
4port intern, 4port extern
PCIe
S26361-F3628-E1
SAS Controller 6Gb/s 8 port
max. 1x per system
max. 2x per system
LSI SAS9200-8e
PCIe 2.0 x4,
ext: 8 port
F
Fujitsu Technology Solutions x86 PRIMERGY Server
14 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
F
VII
Section
Hard disks drives
Configurations with Eco SATA can only be mixed with BC SATA HDD type
SAS and BC SATA drives with the same size can be mixed, but not used in one logical RAID volume
SAS/SATA LFF (3.5") Base Units: SAS HDDs Require SAS Controller! see section VIII internal Disk Array
There is a 6 port SATA controller in the Base Unit for connection of up to 4 SATA LFF hard disks
For up to 4 3,5" SAS hard Drives, you must configure 1 of 3 different 8port SAS controller
Business Critical (BC) SATA 3Gb/s HD 3.5" with hot plug/hot replace tray
500GB 7.200rpm,<9,0ms, 8MB Cache
S26361-F3294-E500
750GB 7.200rpm,<9,0ms, 8MB Cache
S26361-F3294-E750
1000GB 7.200rpm,<9,0ms, 8MB Cache
S26361-F3294-E100
2000GB 7.200rpm,<9,0ms, 8MB Cache
S26361-F3294-E200
max. 4x (or 6x) per system
S26361-F3293-E250
HD 250GB 7.2krpm 3.5"
7200rpm,<9.0 ms, 8MB Cache
ECO SATA 3Gb/s
hot plug/hot replace tray
max. 4x (or 6x) per system
4/6x
G
SAS 6Gb/s 3.5" with hot plug/hot replace tray
300GB 10000rpm,<4,5ms, 8MB Cache
450GB 10000rpm,<4,5ms, 8MB Cache
600GB 10000rpm,<4,5ms, 8MB Cache
max. 4x (or 6x) per system
S26361-F4005-E530
S26361-F4005-E545
S26361-F4005-E560
S26361-F3291-E514
HD 146GB 15krpm 3.5"
15.000rpm,<4ms, 8MB Cache
SAS 3Gb/s
hot plug/hot replace tray
max. 4x (or 6x) per system
SAS / SATA SFF (2.5") Base Units: SAS HDDs Require SAS Controller! see section VIII internal Disk Array
you can choose between 3 types of 8 port SAS controller for the Base Unit.
Up to 8 SAS /SATA SFF (2.5") hard disks can be configured as standard.
S26361-F3298-E32
SSD 32GB
SATA 3Gb/s
hot plug/hot replace tray
max. 8x per system
S26361-F3298-E64
SSD 64GB
SATA 3Gb/s
hot plug/hot replace tray
max. 8x per system
Business Critical (BC) SATA 3Gb/s HD 2.5" with hot plug/hot replace tray
250GB 7.200rpm,<10,5ms, 8MB Cache
S26361-F3601-E250
500GB 7.200rpm,<10,5ms, 8MB Cache
S26361-F3601-E500
1000GB 7.200rpm,<10,5ms, 8MB Cache
S26361-F3601-E100
max. 8x per system
ECO SATA 3Gb/s HD 2.5" with hot plug/hot replace tray
160GB 5.400rpm,<10,5ms, 8MB Cache
320GB 5.400rpm,<10,5ms, 8MB Cache
500GB 5.400rpm,<10,5ms, 8MB Cache
max. 8x per system
8x
S26361-F3297-E160
S26361-F3297-E320
S26361-F3297-E500
Mix of ECO SATA
with SAS HDDs
is not possible !
G
SAS 6Gb/s 2.5" with hot plug/hot replace tray
300GB 10000rpm,<4,5ms, 8MB Cache
450GB 10000rpm,<4,5ms, 8MB Cache
600GB 10000rpm,<4,5ms, 8MB Cache
900GB 10000rpm,<4,5ms, 8MB Cache
73GB 15krpm,<4,5ms, 8MB Cache
146GB 15krpm,<4,5ms, 8MB Cache
max. 8x per system
S26361-F4482-E130
S26361-F4482-E145
S26361-F4482-E160
S26361-F4482-E190
configuration of
SAS-HDDs requires
SAS RAID controller
S26361-F4482-E573
S26361-F4482-E514
G
Fujitsu Technology Solutions x86 PRIMERGY Server
15 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
G
VIII
Section
External SAS Disk Array
SAS RAID controller for JBOD subsystems
S26361-F3593-E1
8 port SAS RAID Controller
LSI
MegaRAID SAS9280-8e 6Gb/s
512MB Cache with ECC
RAID 0, 1, 10, 5, 50, 6 & 60
without iBBU
SAS 3Gb/sec
8 port external
PCIe x4, 167mm
low profile bracket
max. 1x per system
IX
Section
S26361-F3257-E255
BBU max. 1x per system possible
Cache Battery Backup Unit
for loose delivery please order
max. 1x per Controller
S26361-F3257-L210
Internal Disk Array
SATA Configuration
SATA Base Units contain a 6-port on-board SATA controller supporting RAID Levels 0, 1, 10
SAS Configuration
you can choose between 3 types of 8 port SAS controller for the Base Unit:
- LSI 1068e or 2008 based Modular RAID 0,1 (IME)
- LSI 2108 based Modular RAID 5,6
if you want to use SAS harddisks or a 2,5" Base Unit one Controller is required
On special request based on customising projects up to 4 SATA 2,5" HDDs can be configured without a controller
Controller for 1 to 8 LFF (3.5") or SFF (2.5") HDD
S26361-F3257-E8
8 port SAS RAID Controller
LSI
MegaRAID SAS 1068
no Cache, no BBU
RAID 0, 1 & 1E
SAS 3Gb/sec
8 internal ports
PCIe x4, 160mm
max. 1x per system
S26361-F3554-E8
RAID Ctrl SAS 6G 8port internal
Based on chip LSISAS2008
LSI MegaRAID
no Cache, no BBU
RAID 0, 1 & 1E
Support for 3Gb/s and 6Gb/s
SATA and SAS hard drives
PCIe x8
Low-profile MD2 form factor
max. 1x per system
S26361-F3554-E512
RAID Ctrl SAS 6G 8port internal
Based on chip LSISAS2108
LSI MegaRAID
512MB Cache with ECC
RAID 0, 1, 10, 5, 50, 6, 60
optional BBU
Support for 3Gb/s and 6Gb/s
SATA and SAS hard drives
PCIe x8
Low-profile MD2 form factor
max. 1x per system
S26361-F3257-E255
Cache Battery Backup Unit
max. 1x per Controller
L-Order-Number is:
S26361-F3257-L210
H
Fujitsu Technology Solutions x86 PRIMERGY Server
16 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
H
X
Section
Communication / Network
1x on-board LAN Controller
Fast Ethernet Controller on-board
1 Gbit Intel Hartwell
ext: for RJ 45-connector
SW: AFT, VLAN, Fast Channel
Teaming: Failover, Load Balancing
The Intel LAN server adapter
can be used with the on-board controller in Teaming Mode.
Two onboard LAN ports can likewise educate a team.
A) PCI-Express Adapter 1000TX/SX
2x
S26361-F3241-E1
Gigabit Ethernet Contr. 1000TX
Eth Ctrl 1x1Gbit PCI-e Pro/1000PT Cu
Intel PRO/1000 PT Server Adapter
S26361-F3242-E1
Gigabit Ethernet Contr. 1000SX
Eth Ctrl 1x1Gbit PCI-e Pro/1000PF LC
Intel PRO/1000 PF Server Adapter
PCIe x1
ext: for RJ45-connector, Cat 5
max. 2x per system
PCIe x4
ext:LC-connector
max. 2x per system
S26361-F3516-E1
Gigabit Ethernet Controller 1000TX
Eth Ctrl 1x1Gbit PCI-e Gigabit CT DT Cu
Intel® Gigabit CT Desktop Adapter
PCIe x1
ext: for RJ45-connector, Cat 5
max. 2x per system
B) Dual Port PCI-Express Adapter 1000TX/SX
S26361-F3610-E2
Gigabit Ethernet Controller Dual 1000TX
Eth Ctrl 2x1Gbit PCIe x4 D2735 Cu
Intel Kawela based 2 port Server Adapter
max. 3x
Loose delivery with:
S26361-F3610-L502
PCIe x4,
ext: for RJ45-plug, Cat 5
max. 2x per system
C) Quad Port PCIe Adapter 1000TX
S26361-F3611-E1
Gigabit Ethernet Controller Quad 1000TX
Eth Ctrl 4x1Gbit PCIe x4 D2745 Cu
Intel Barton Hills based 4 Port Server Ad.
PCIe x4,
ext: for RJ45-plug, Cat 5
max. 2x per system
Loose delivery with:
S26361-F3611-L501
D) 10GbE 2-Port SFP+ for MMF Module and Twinax Cable
2
4
S26361-F3629-E2
4
(D2755)
4
10 Gigabit Ethernet Contr. dual port SFP+
2x
Eth Ctrl 2x10Gbit PCIe x8 D2755 SFP+
The controller is delivered without SFP+ modules for optical cables, these must be ordered
Intel Niantic based dual port 10Gb NIC
separately. Without SFP+ modules copper twinax cables are supported.
PCIe x8, Low Profile, Full Height Bracket
The adapter is also available as loose delivery with
ext: 2x SFP+ cage
FH and LP bracket included: S26361-F3629-L502
max. 2x per system
S26361-F3986-E3
The SFP+ Module is also available as loose delivery
SFP+ Module MMF 10GbE LC
S26361-F3986-L3
SFP+ module for 10 Gbit
Instead SFP+ Modules, SFP+ twinax cables from
Ethernet FO cabling
ext:LC-connector
the switch vendors may be used
max. 2x per adapter
In TX150 S7 the PCI-Slot used by this option
is an otherwise unused Slot.
All 6 Slots remain available.
S26361-F2571-E10
Serial Port Option
RS-232-C
Cable with 9-pin plug
1x
for a 2nd RS-232-C Serial Port
Interface
occupies PCI slot
max. 1x per system
I
Fujitsu Technology Solutions x86 PRIMERGY Server
17 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
I
XI
Section
System management options
S26361-F1790-E241
iRMC2 advanced pack
integrated remote management controller
activation key for
graphical console redirection
and remote media redirection
max. 1x per system
XII
Section
Miscellaneous
S26361-F2571-E10
External on-board serial port Interface
Cable and external
connector interface (9 pins)
fit´s PCI cutoff (see Info-Box)
max. 1x per system for ext.
housing offers addional cutoff - no PCI slot occupied
J
Fujitsu Technology Solutions x86 PRIMERGY Server
18 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
J
Section
XIII
Country specific power cords
Since the beginning of this year the specifications
for the approval and production monitoring for
China (CCC) have become stricter. This is why the
CCC certification label must in future be ordered separately
S26361-F3301-E120
CCC Certification for China
A country specific power cord has to be ordered for all floorstand versions:
- once per basic unit and an additional second cable
- if an second hot plug, redundant power supply modul is ordered.
PRIMERGY TX150 S7 Floorstand
PRIMERGY TX150 S7 Rack
Power cord for following countries:
1,8 m, grey
max.
2x
T26139-Y1740-E10
T26139-Y1742-E10
T26139-Y1743-E10
T26139-Y1744-E10
T26139-Y1745-E10
T26139-Y1746-E10
T26139-Y3850-E10
D, A, B, F, NL, FIN, S, N, E, P, RUS, TR
USA, Canada
Switzerland
UK, Ireland
Italy
Denmark
Option "no powercord", for Countries without
specific cable orderable like e.g. China
Country specific power cords are not
required for rack versions, except for USA
&Canada. Power cords are shipped in a rack
version with inlet connector for non-heating
apparatus. (1x with Standard PSU,
2x with hot plug upgrade)
T26139-Y1742-E10
USA, Canada
For shipments to USA&Canada, you have to order
one power cord (1,8m, grey) per power supply.
Attention: For connection of a monitor
to the system an additional country
specific power cord has to be
ordered as option.
Power cord for optional monitor connection for the following countries:
1.8m, grey
T26139-Y1740-L10
D, A, B, F, NL, FIN, N, S, E, P, RUS, TR
T26139-Y1742-L10
USA, Canada
T26139-Y1744-L10
UK, IR
T26139-Y1745-L10
Italy
T26139-Y1746-L10
Denmark
Options and other peripherals
For other options, refer to SystemArchitect and Pricelist.
These options are supplied lose with the shipment.
For suitable peripherals for this product, please refer to SystemArcitect.
Option for Floorstand
USB keyboards for floorstand versions for following countries:
USB standard
USB standard
USB professional
Keyboard KB400
Keyboard KB500
Keyboard KBPC PX
S26381-K550-E170
S26381-K500-E170
Switzerland
S26381-K340-E170
S26381-K550-E104
S26381-K500-E104
Czech/Slovak
S26381-K340-E104
S26381-K550-E120
S26381-K500-E120
Germany
S26381-K340-E120
S26381-K550-E180
S26381-K500-E180
Spain
S26381-K340-E180
S26381-K550-E140
S26381-K500-E140
France
S26381-K340-E140
S26381-K550-E165
S26381-K500-E165
United Kingdom
S26381-K340-E165
S26381-K550-E185
S26381-K500-E185
Italy
S26381-K340-E185
S26381-K550-E154
S26381-K500-E155
Sweden / Finland
S26381-K340-E155
S26381-K550-E102
S26381-K500-E110
USA / international
S26381-K340-E110
USB professional
Keyboard KBPC PX ECO
S26381-K341-E170
S26381-K341-E104
S26381-K341-E120
S26381-K341-E180
S26381-K341-E140
S26381-K341-E165
S26381-K341-E185
S26381-K341-E154
S26381-K341-E110
option for floorstand
Optional Mouse
S26381-K431-E100
S26381-K431-E101
Mouse M480 black
Mouse M480 grey
End PRIMERGY TX150 S7
Fujitsu Technology Solutions x86 PRIMERGY Server
19 of 20
System configurator and order-information guide
PRIMERGY TX150 S7
Status 2012-05-30
Change Report
Date
Order number
Changes
2012-02-28
2012-01-30
S26361-F3301-E120
S26361-F3641-E2
L110
S26361-F4482-E114
S26361-F3601-E250
add CCC Certification
new Blue-ray Triple Writer added
S26361-F3298-E64
S26361-F3610-E2/L502
S26361-F2735-L202
S26361-F3585-E2
S26361-F3628-E1
S26361-F3611-E1
S26361-F3610-E1
S26361-F3593-E1
S26361-F3626-E1
S26361-F3627-E1
S26361-F4006-E145
S26361-F4006-E160
S26361-F3589-E226
S26361-F3611-E1
S26361-F3610-E1
S26381-K431-E101
S26361-F3578-E347
64 GB SSD - no longer available
Formal change from E1 / L501
Adapter angle …L31 must be ordered for asym. PC/DC racks additionally
Blu-ray Triple Writer HH SATA - now available
Ctrl SAS 6G 8port external added
New Quad LAN GbE controller - now available
New Dual LAN GbE controller - now available
8-port SAS-RAID Controller external - now available
Upgrade - New LTO4 SAS drive
New LTO5 SAS drive
new HD - as soon as available
new HD - as soon as available
Celeron G1101 2.26GHz 2MB 2C 1066MHz (73W) entfällt
New Quad LAN GbE controller - as soon as available
New Dual LAN GbE controller - as soon as available
Added Mouse M480 grey
Update on released CPUs
New KB400 and professional KBPC PX ECO Keyboards added
Energy Star Restrictions extended
MegaRAID SAS9280-8e 6Gb/s added
new 2000GB SATA HD - as soon as available
First release
2012-01-27
2011-12-21
2011-10-01
2011-10-01
2011-05-03
2011-04-07
2010-12-30
2010-11-18
2010-09-30
2010-09-30
2010-09-30
2010-09-13
2010-09-13
26.08.2010
26.08.2010
01.08.2010
2010-08-01
2010-08-01
2010-06-23
2010-06-15
2010-05-30
2010-05-18
2010-02-18
2010-01-11
2010-01-01
S26361-F3578-E348
S26361-F3593-E1
S26361-F3294-E200
for BBU eliminated
SAS HD 6G 144GB - no longer available
new BC SATA HD - now available
Fujitsu Technology Solutions x86 PRIMERGY Server
20 of 20