CONCEPT1-KIT
100V Conversion kit for CONCEPT1
The CONCEPT1T-KIT allows you to convert a low impedance Concept1 into a 100V amplifier. The kit
contains 2 transformers and fixation screws.
The circuit board of the unit has been pre-equipped to accommodate the transformers, so the
conversion is a quick, hassle-free operation. Thanks to this conversion kit, CONCEPT1 is a very
versatile amplifier that can be used in both low-impedance and 100 V situations. APart products have
been designed with installer's ease in mind!
TECHNICAL SPECIFICATIONS
Maximum 60 Watts of 100 V speaker per output, this corresponds to an impedance of minimum 167
Ohm.
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM