KS-AX3004
Bridgeable 4-Channel Power Amplifier
Product Highlights:
- Max. Power Output of 680W
- Continuous Power Output: 60W RMS x 4 at 4 ohms
- 4-, 3-, or 2-Channel Operation
- Class-AB Circuit
- PWM Regulated MOS-FET Power Supply
- Frequency Response: 5Hz - 50000Hz (0, -3dB)
- S/N: 76dBA
- THD: Less than 0.04% at 1kHz
- HPF (150Hz, -12dB/oct)
- LPF (80Hz, -12dB/oct)
- Variable Input Level Control (0.3 - 6V)
- Gold-Plated Input Terminals (Power)
- Gold-Plated RCA Jacks
- Speaker Input Connector
- Protection Circuitry (Thernmal/Short Circuit/
Overload/DC Offset)
- Anti-Pop Circuit
- LED Indicator
JVC ISD - j@net Product Information as of 02/Sep/2008
KS-AX3004
Bridgeable 4-Channel Power Amplifier
Amplifiers
Amplifier
Continuous Power Output 60W x 4
(RMS) at 4 ohms, 20Hz
to 20,000Hz, less than
or equal to 1% THD+N
(CEA-2006 compliant)
Operation Channel
2, 3 or 4
Bridgeable
Yes
Maximum Power Output 680W (340W x 2)
RMS Power Output
85W x 4 into 2 ohms less
than or equal to 1% THD+N,
120W x 2 into 4 ohms at
less than or equal to 1%
THD+N
MOS-FET Power Supply Yes
Input Level Control
Yes
HPF
150Hz, -12dB/oct
LPF
80Hz, -12dB/oct
Variable Input RCA Level 0.3 - 6V
Control
Variable Speaker Input
Yes
Control
Gold-Plated Input
4 Pairs
Terminals (Power)
Power Supply Block
3 Pairs (Gold-Plated)
Terminals
Speaker Out Block
8 Pairs x 1 (Gold-Plated)
Terminals
Speaker Input Connector 6 Pairs, 5 Wires
Protection Circuitry
Yes
(Thermal / Short
Circuit / Overload / DC
Offset)
Anti-Pop Circuit
Yes
LED Illumination
Yes
Frequency Response (+0, 5Hz - 50kHz
-3dB)
Signal-to-Noise Ratio
76dBA
(reference: 1W into 4
ohms), CEA-2006
Compliant
Load Impedance
4 ohms
Allowance
2 - 8 ohms
Allowance (Bridged)
4 - 8 ohms
Distortion (at 1kHz)
Less than 0.04%
Design and specifications subject to change without notice.
JVC ISD - j@net Product Information as of 02/Sep/2008