APart PIR-REC
PRE-AMPLIFIER
The PIR-REC is an IR receiver that can be used to capture different IR signals and send them to the
PIR7600. It comes standard with the PIR7600. The PIR-REC can be installed by using the included
adhesive tape or the 2 small screws. This makes it easy to install.
Besides the IR signals to control the PIR7600, the PIR-REC is capable to capture the IR signals of
other devices like DVD, CD, Tuner or others, and send them to the PIR7600. The PIR-EMIT will then
prolongue the IR signal to the corresponding device.
As soon as the PIR-REC is plugged into the PIR7600 the IR receiver on the front of the pre-amplifier
is no longer functioning until the PIR-REC is unplugged.
TECHNICAL SPECIFICATIONS
Material
Connector
Cable length
Dimensions (dia x H)
Weight
WWW.APART-AUDIO.COM
Plastic
stereo mini jack
5m
35 x 16 mm
0.088 Kg (adhesive tape and screws included)
INFO@APART-AUDIO.COM