Juniper EX2200-24P-4G-TAA network switch

DATASHEET
EX2200 Ethernet
Switch
Product Overview
High-performance businesses
demand high-performance
networking solutions. The Juniper
Networks EX2200 Ethernet Switch
offers an economical, entry-level,
stand-alone solution for access-layer
deployments in branch and remote
offices, as well as campus networks.
The EX2200 also supports Juniper
Networks Virtual Chassis technology,
allowing up to four interconnected
switches to be managed as a single
logical device, delivering a scalable,
pay-as-you-grow solution for
expanding networks.
Product Description
Featuring complete Layer 2 and basic Layer 3 switching capabilities, the Juniper Networks®
EX2200 line of fixed configuration Ethernet switches with Virtual Chassis technology
satisfies the branch and low-density wiring closet connectivity requirements of today’s
high-performance businesses. Four platform configurations are available offering 24
and 48 10/100/1000BASE-T ports with or without Power over Ethernet (PoE). The PoEenabled EX2200 models include a maximum system budget of 405 W to deliver up to 15.4
watts of standards-based 802.3af Class 3 PoE or 30 watts of standards-based 802.3at
PoE+ for supporting networked devices such as telephones, video cameras, multiple
radio IEEE 802.11n wireless LAN (WLAN) access points and video phones in converged
networks.
Additional features include:
• Four front panel small form-factor pluggable transceiver (SFP) GbE uplink ports provide
high-speed connectivity to aggregation layer switches or other upstream devices.
• Uplink ports can be configured as Virtual Chassis interfaces and connected via standard GbE
optics interfaces. The last two uplinks are preconfigured by default as Virtual Chassis ports.
• Fixed power supply and uplink ports ensure operational simplicity.
• Low power consumption, low acoustic fans, and small 10-inch wide footprint enable
flexible, environmentally friendly deployment.
• Support for L2 protocols as well as L3 protocols like RIP and static routing in base license.
• Optional enhanced license for supporting additional L3 protocols such as OSPF, Internet
Group Management Protocol (IGMP v1/v2/v3), and Protocol Independent Multicast (PIM).
• Single release train for Juniper Networks Junos® operating system ensures consistent
control plane feature implementation.
• Modular Junos OS prevents a switch reboot if a single protocol feature fails.
• Managed through a single application, Juniper Networks Network and Security Manager.
• Integrates with Juniper Networks Unified Access Control to provide per-user access control
and policing.
• Enhanced limited lifetime switch hardware warranty.
• Built-in Web interface (Juniper Networks J-Web Software).
1
Product Overview
Virtual Chassis Technology
The Juniper Networks EX2200 line of Ethernet switches offers
a compact, high-performance solution for supporting today’s
converged network access deployments.
The EX2200 supports Juniper’s unique Virtual Chassis technology,
enabling up to four interconnected EX2200 switches to be
managed as a single logical device, delivering a scalable, pay-asyou-grow solution for expanding network environments.
Each EX2200 switch includes an application-specific integrated
circuit (ASIC)-based Packet Forwarding Engine (PFE) with an
integrated CPU to consistently deliver wire-rate forwarding, even
with all control plane features enabled. Based on existing, field
proven Juniper Networks technology, the PFE brings the same
level of carrier-class performance and reliability to the EX2200
switches that Juniper Networks routers bring to the world’s largest
service provider networks.
While EX2200 switches can be interconnected over any of the
front-panel uplink ports, the last two ports are configured by
default as Virtual Chassis ports, automating deployments when
using standard 10GbE SFP+ or GbE SFP transceivers (sold
separately). These two ports can also be configured as GbE or
10GbE uplinks to aggregation devices by disabling the Virtual
Chassis technology.
When deployed in a Virtual Chassis configuration, the EX2200
switches elect a master and a backup switch based on a set of
preconfigured policies or criteria. The master switch automatically
creates and updates the switching and optional routing tables on
all other Virtual Chassis switch members. Switches can be added
to or removed from the Virtual Chassis configuration without
service disruption.
Architecture and Key Components
The EX2200 occupies a single rack unit, delivering a compact solution
for crowded wiring closets and access locations where space and
power are at a premium. The EX2200 switch’s 10-inch depth and low
acoustics also make it ideal for open office deployments.
Each EX2200 switch supports four fixed front panel GbE uplink
ports with pluggable optics (purchased separately) for high-speed
backbone or link aggregation connections between wiring closets
and upstream aggregation switches. The EX2200 also features a
front panel mode button that offers a simple interface for bringing
devices up and selecting LED modes.
EX2200 Virtual Chassis configurations operate as highly resilient
unified systems, providing simplified management using a single
IP address, single telnet session, single command-line interface
(CLI), automatic version checking, and automatic configuration.
The EX2200 switches are also capable of local switching, so
packets coming into a port destined for another port on the same
switch do not have to traverse the Virtual Chassis, increasing
forwarding capacities.
A dedicated rear panel RJ-45 Ethernet port is available for out-ofband management, while a rear panel USB port can be used to
easily upload the Junos operating system and configuration files.
EX2200 Virtual Chassis configurations implement the same slot/
module/port numbering schema as other Juniper Networks chassisbased products, providing true chassis-like operations. By using
a consistent operating system and a single configuration file, all
switches in a Virtual Chassis configuration are treated as a single
device, simplifying overall system maintenance and management.
Branch Office
Workgroup
UAC Enforcement Point
EX2200
J2320/SRX Series
WAN
EX2200
PSTN
UAC Enforcement
Point
Local Servers
Wiring Closets
GbE
EX4200
EX2200
GbE
10GbE
UAC
Enforcement
Point
EX3200
Access Layer
10GbE
EX4200
Aggregation/Core Layer
Figure 1: The EX2200 line provides a high-performance solution for converged networks in
branch offices as well as campus wiring closets.
2
Wiring Closet 1
Wiring Closet 2
EX2200
EX2200
Access
Wiring Closet 4
Wiring Closet 3
EX2200
EX2200
Dual FE/GbE uplinks
(fiber or copper)
Aggregation
EX4200
EX4200
Figure 2: The EX2200 Ethernet switches support Virtual Chassis technology, enabling up
to four interconnected switches to operate as a single, logical device.
Features and Benefits
High Availability Features
• Redundant Trunk Group (RTG): To avoid the complexities of
the Spanning Tree Protocol (STP) without sacrificing network
resiliency, the EX2200 employs a redundant trunk group to provide
the necessary port redundancy and simplify switch configuration.
• Power resiliency through external redundant power supply: The
EX2200 supports an optional redundant power supply (RPS) unit
which provides power resiliency.
Junos Operating System
The EX2200 runs the same Junos OS used by other Juniper
Networks EX Series Ethernet Switches, as well as all of Juniper’s
routers and Juniper Networks SRX Series Services Gateways. By
utilizing a common operating system, Juniper delivers a consistent
implementation and operation of control plane features across
all products. To maintain that consistency, Junos OS adheres to a
highly disciplined development process that uses a single source
code, follows a single quarterly release train, and employs a highly
available modular architecture that prevents isolated failures from
bringing down an entire system.
These attributes are fundamental to the core value of the
software, enabling all Junos OS-powered products to be updated
simultaneously with the same software release. All features are
fully regression-tested, making each new release a true superset
of the previous version; customers can deploy the software
with complete confidence that all existing capabilities will be
maintained and operate in the same way.
Converged Environments
The EX2200 provides the highest levels of flexibility and features
in its class for the most demanding converged data, voice, and
video environments, delivering a reliable platform for unifying
enterprise communications.
By providing a full 15.4 watts of Class 3 PoE to VoIP telephones,
closed-circuit security cameras, wireless access points, and other
IP-enabled devices, the EX2200 delivers a future proofed solution
for converging disparate networks onto a single IP infrastructure.
The EX2200 PoE switches also support 802.3at standards-based
PoE+ for powering networked devices like multiple radio IEEE 802.11n
wireless access points, and video phones that may require more
power than available with IEEE 802.3af.
To ease deployment, the EX2200 supports the industry-standard
Link Layer Discovery Protocol (LLDP) and LLDP-Media Endpoint
Discovery (LLDP-MED) protocol, enabling the switches to
automatically discover Ethernet-enabled devices, determine their
power requirements, and assign virtual LAN (VLAN) membership.
LLDP-MED-based granular PoE management allows the EX2200
to negotiate PoE usage down to a fraction of a watt on powered
devices, enabling more efficient PoE utilization across the switch.
In addition, the EX2200 supports rich quality-of-service (QoS)
functionality for prioritizing data, voice, and video traffic. The
switches support eight class-of-service (CoS) queues on every
port, enabling them to maintain multilevel, end-to-end traffic
prioritizations. The EX2200 also support a wide range of policy
options, including strict priority, low-latency, weighted random
early detection (WRED), and shaped deficit weighted round-robin
(SDWRR) queuing.
Security
The EX2200 fully integrates with Juniper Networks Unified Access
Control, which consolidates all aspects of a user’s identity, device,
and location. This enables administrators to enforce access
control and security down to the individual port or user levels.
Working as an enforcement point within UAC, the EX2200
provides both standards-based 802.1X port-level access
control for multiple devices per port, as well as Layer 2-4 policy
enforcement based on user identity, location, and/or device. A
user’s identity, device type, machine posture check, and location
can be used to determine whether access should be granted and
for how long. If access is granted, the switch assigns the user’s
device to a specific VLAN based on authorization policy. The
switch can also apply security policies, QoS policies, or both, or it
can mirror user traffic to a central location for logging, monitoring,
or threat detection by intrusion prevention systems.
3
The EX2200 also provides a full complement of integrated port
security and threat detection features, including Dynamic Host
Configuration Protocol (DHCP) snooping, Dynamic ARP Inspection
(DAI), and media access control (MAC) limiting to defend against
internal and external spoofing, man-in-the-middle and denial of
service (DoS) attacks.
Simplified Management and Operations
When deployed in a Virtual Chassis configuration, the EX2200
dramatically simplifies network management. Up to four
interconnected EX2200 switches can be managed as a single
device utilizing a single Junos OS image file and a single
configuration file, reducing the overall number of units to monitor
and manage. When the Junos OS is upgraded on the master
switch in an EX2200 Virtual Chassis configuration, the software
is automatically upgraded on all other member switches at the
same time.
The EX2200 includes port profiles that allow network
administrators to automatically configure ports with security, QoS,
and other parameters based on the type of device connected to
the port. Six preconfigured profiles are available, including default,
desktop, desktop plus IP phone, WLAN access point, routed uplink,
and Layer 2 uplink. Users can select from the existing profiles
or create their own and apply them through the command-line
interface (CLI), J-Web Software interface, or management system.
In addition, a feature called system snapshot makes a copy of
all software files used to run the switch—including the Junos
operating system, the active configuration and the rescue
configuration—that can be used to reboot the switch at the next
power-up or as a backup boot option. The Junos OS software can
also be pre-installed on a flash drive and used to boot the EX2200
at any time.
Another feature, called automatic software download, enables
network administrators to easily upgrade the EX2200 using
the DHCP message exchange process to download and install
software packages. Users simply configure the automatic
software download feature on EX2200 switches acting as DHCP
clients and establish a path to the server where the software
package file is installed. The server then communicates the path
to the software package file through DHCP server messages.
An EZ touchless provisioning feature allows a DHCP server to push
configuration details and software images to multiple switches at
bootup.
Three system management options are available for the EX2200
line. The standard Junos OS CLI management interface offers
the same granular capabilities and scripting parameters found in
any router powered by the Junos operating system. The EX2200
also includes the integrated J-Web interface, an embedded webbased device manager that allows users to configure, monitor,
troubleshoot, and perform system maintenance on individual
switches via a browser-based graphical interface.
Finally, EX2200 fault, configuration, and performance data can be
exported to leading third-party management systems such as HP
OpenView, IBM Tivoli, and Computer Associates Unicenter software,
providing a complete, consolidated view of network operations.
4
Junos Space
Juniper also offers a comprehensive suite of network management
tools that provide a smart, simple, and open approach for
automating the deployment and operation of a Juniper
infrastructure.
These tools are based on a single network application platform
called Juniper Networks Junos® Space, an open, programmable
application platform for hosting network infrastructure and
operational applications across the entire management life cycle
of the network. Explicitly designed to allow partners and customers
to build and deploy smart, simple, and easy-to-use applications,
Junos Space provides multiple management and infrastructure
applications for managing Juniper resources and assets, including
inventory management, device and interface configuration,
automated software management and deployment, and eventdriven fault management. These platform applications are
embedded within the core product, allowing users to control any
part of their environment when used in conjunction with multiple
add-on applications. Junos Space will support a full portfolio of
applications for automating network infrastructure and operations
covering the campus LAN and data center network environments.
Designed to automate the configuration, visualization, monitoring,
and administration of large switch and router networks, these
Junos Space applications offer predefined automation schemes
and best practice templates to enable rapid and accurate
deployments. When managing a group of EX2200 switches,
the Junos Space platform and associated applications provide
network-level management across all Juniper Networks switches
from a single console.
Enhanced limited Lifetime Warranty
The EX2200 includes an enhanced limited lifetime hardware
warranty that provides next business day advance hardware
switch replacement for as long as the original purchaser owns
the product. The warranty includes lifetime software updates,
advanced shipping of spares within one business day, and 24x7
JTAC support for 90 days after the purchase date. Power supplies
and fan trays are covered for a period of five years. For complete
details, please visit www.juniper.net/support/warranty.
Hardware Specifications
•
•
•
•
•
EX2200-24T
Switching Engine Model: Store and forward
DRAM: 512 MB
Flash: 1 GB
CPU: 800 MHz ARM CPU
GbE port density per system:
-- 24P/24T: 28 (24 host ports + four-port GbE uplinks)
-- 48P/48T: 52 (48 host ports+ four-port GbE uplinks)
Optics
• 100 Mbps optic/connector type: LC SFP fiber supporting 100BASEFX SFP (multimode) and BX (single strand)
EX2200-24P
• 10/100/1000BASE-T connector type RJ-45
• GbE SFP optic/connector type: RJ-45, or LC SFP fiber supporting
1000BASE-T SFP, SX (multimode), LX (single-mode), or LH/ZX
(single-mode)
EX2200-48T
Physical Layer
EX2200 Ethernet Switch Specifications
• Physical port redundancy: Redundant Trunk Group (RTG)
• Time-domain reflectometry (TDR) for detecting cable breaks
and shorts
• Auto MDI/MDIX (medium-dependent interface/mediumdependent interface crossover) support
• Port speed downshift/setting maximum advertised speed on
10/100/1000BASE-T ports
Physical Specifications
• Digital optical monitoring for optical ports
Dimensions (W x H x D)
Packet Switching Capacities
• Width: 17.4 in (44.1 cm) for desktop installations
17.5 in (44.6 cm) with rack-mount brackets
• 24P/24T: 56 Gbps
EX2200-48P
• Height: 1.75 in (4.45 cm) for 1U installations
• 48P/48T: 104 Gbps
Layer 2 Throughput (Mpps)
• Depth: 10 in (25.43 cm)
• 24P/24T: 41.7 Mpps (wire speed)
Weight
• 48P/48T: 77.4 Mpps (wire speed)
• EX2200-24T: 6 lb (2.7 kg)
Layer 2 Switching
• EX2200-24P: 8 lb (3.6 kg)
• EX2200-48T: 8 lb (3.6 kg)
• EX2200-48P: 10 lb (4.5 kg)
Environmental Ranges
• Operating temperature: 32° to 113° F (0° to 45° C)
• Storage temperature: -40° to 158° F (-40° to 70° C)
• Operating altitude: up to 10,000 ft (3,048 m)
• Non-operating altitude: up to 16,000 ft (4,877 m)
• Relative humidity operating: 10% to 85% (noncondensing)
• Relative humidity non-operating: 0% to 95% (noncondensing)
Power Options
Model
Maximum System
Power Consumption
(Input Power without
PoE)
Total PoE
Power Budget
EX2200-24T-4G
50 W AC
0
EX2200-24P-4G
65 W AC
405 W
EX2200-48T-4G
76 W AC
0
EX2200-48P-4G
91 W AC
405 W
Cooling
Airflow:
• 24T/48T: 11 cfm
• 24P/48P: 16.4 cfm
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Maximum MAC addresses in hardware: 16,000
Jumbo frames: 9216 bytes
Number of VLANs: 1,024 (VLAN IDs: 4,096)
Port-based VLAN
MAC-based VLAN
Voice VLAN
Private VLAN (PVLAN)
IEEE 802.1ak: Multiple VLAN Registration Protocol (MVRP)
Multicast VLAN Registration (MVR)
Compatible with Per-VLAN Spanning Tree Plus (PVST+)
RVI (Routed VLAN Interface)
IEEE 802.1AB: Link Layer Discovery Protocol (LLDP)
LLDP-MED with VoIP integration
IEEE 802.1D: Spanning Tree Protocol
IEEE 802.1p: CoS prioritization
IEEE 802.1Q: VLAN tagging
IEEE 802.1Q-in-Q: VLAN Stacking
IEEE 802.1s: Multiple Spanning Tree Protocol (MSTP)
Number of MST instances supported: 64
IEEE 802.1w: Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1X: Port Access Control
IEEE 802.3: 10BASE-T
IEEE 802.3u: 100BASE-T
IEEE 802.3ab: 1000BASE-T
IEEE 802.3z: 1000BASE-X
IEEE 802.3af: PoE
5
Specifications (continued)
Layer 2 Switching (continued)
• RFC 2030 Simple Network Time Protocol (SNTP)
•
•
•
•
•
•
• RFC 854 Telnet client and server
IEEE 802.3at: PoE+
IEEE 802.3x: Pause Frames/Flow Control
IEEE 802.3ad: Link Aggregation Control Protocol (LACP)
IEEE 802.3ah: Ethernet in the First Mile
IEEE 802.1ag: Connectivity Fault Management (CFM)
G.8032 (Ethernet Ring Protection)
Layer 3 Features: IPv4
• Maximum number of Address Resolution Protocol (ARP)
entries: 2,000
• Maximum number of IPv4 unicast routes in hardware: 6500
• Routing protocols:
• RIP v1/v2
• OSPF v1/v2 (with 4 active interfaces)
• Static routing
• Bidirectional Forwarding Detection (BFD)
• IP directed broadcast
Layer 3 Features: IPv6 Management Functionality
• Neighbor discovery, Syslog, Telnet, SSH, J-Web, SNMP, NTP, DNS
• Static routing
Supported RFCs
• RFC 3176 sFlow
• RFC 2925 MIB for remote ping, trace
• RFC 1122 Host requirements
• RFC 768 UDP
• RFC 791 IP
• RFC 783 Trivial File Transfer Protocol (TFTP)
• RFC 951, 1542 BootP
• RFC 2131 BOOTP/DHCP relay agent and DHCP server
• RFC 1591 Domain Name System (DNS)
• RFC 2474 DiffServ Precedence, including 8 queues/port
• RFC 2598 DiffServ Expedited Forwarding (EF)
• RFC 2597 DiffServ Assured Forwarding (AF)
• LLDP Media Endpoint Discovery (LLDP-MED), ANSI/TIA-1057,
draft 08
Security
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• RFC 792 Internet Control Message Protocol (ICMP)
• RFC 793 TCP
• RFC 826 ARP
• RFC 894 IP over Ethernet
• RFC 903 Reverse ARP (RARP)
• RFC 906 TFTP bootstrap
• RFC 1027 Proxy ARP
•
•
•
•
•
MAC limiting
Allowed MAC addresses—configurable per port
Sticky MAC (persistent MAC address learning)
Dynamic ARP inspection (DAI)
Proxy ARP
Static ARP support
DHCP snooping
IP source guard
802.1X port-based
802.1X multiple supplicants
802.1X with VLAN assignment
802.1X with authentication bypass access (based on host
MAC address)
802.1X with VoIP VLAN support
802.1X dynamic ACL based on RADIUS attributes
802.1X Supported EAP types: Message Digest 5 (MD5), Transport
Layer Security (TLS), Tunneled Transport Layer Security (TTLS),
Protected Extensible Authentication Protocol (PEAP)
Captive Portal
Trusted Network Connect (TNC) certified
Static MAC authentication
MAC-RADIUS
Control plane DoS protection
• Fallback Authentication
• RFC 1812 Requirements for IP Version 4 routers
Access control lists (ACLs) (Junos OS firewall
filters)
• RFC 1519 Classless Interdomain Routing (CIDR)
• Port-based ACL (PACL)—ingress
• RFC 1256 IPv4 ICMP Router Discovery (IRDP)
• VLAN-based ACL (VACL)—ingress and egress
• RFC 1058 RIP v1
• Router-based ACL (RACL)—ingress and egress
• RFC 2453 RIP v2
• ACL entries (ACE) in hardware per system: 1,500
• RFC 1492 TACACS+
• ACL counter for denied packets
• RFC 2138 RADIUS authentication
• ACL counter for permitted packets
• RFC 2139 RADIUS accounting
• Ability to add/remove/change ACL entries in middle of list
(ACL editing)
• RFC 2068 HTTP server
• RFC 3579 RADIUS Extensible Authentication Protocol (EAP)
support for 802.1X
• L2-L4 ACL
• RFC 5176 Dynamic Authorization Extensions to RADIUS
• RFC 2267 Network ingress filtering
*Unless explicitly specified for any particular MIB table or variables, Junos OS does not support SNMP set operations.
6
Specifications (continued)
High Availability
• Simple Network Management Protocol (SNMP): v1, v2c, v3
• External redundant power system (RPS) option
• Remote monitoring (RMON) (RFC 2819) Groups 1, 2, 3, 9
• Link Aggregation
• Network Time Protocol (NTP)
• 802.3ad (LACP) support:
• DHCP server
-- Number of LAGs supported: 32
• DHCP client and DHCP proxy
-- Maximum number of ports per LAG: 8
• DHCP relay and helper
• LAG load sharing algorithm—Bridged Unicast Traffic:
• RADIUS authentication
-- IP: S/D MAC, S/D IP
• TACACS+ authentication
-- TCP/UDP: S/D MAC, S/D IP, S/D Port
• SSHv2
-- Non-IP: S/D MAC
• Secure copy
• LAG sharing algorithm—Routed Unicast Traffic:
• HTTP/HTTPs
-- IP: S/D IP
• DNS resolver
-- TCP/UDP: S/D IP, S/D Port
• Syslog logging
• LAG load sharing algorithm—Bridged Multicast Traffic:
• Temperature sensor
-- IP: S/D MAC, S/D IP
• Configuration backup via FTP/secure copy
-- TCP/UDP: S/D MAC, S/D IP, S/D Port
• Interface range
-- Non-IP: S/D MAC
Supported MIBs*
• LAG sharing algorithm—Routed Multicast Traffic:
-- IP: S/D IP
-- TCP/UDP: S/D IP, S/D Port
• Tagged ports support in LAG
• Uplink Failure Detection (UFD)
Quality of Service (QoS)
• Layer 2 QoS
• Layer 3 QoS
• Ingress policing: 1 rate 2 color
• Hardware queues per port: 8
• Scheduling methods (egress): Strict Priority (SP), shaped deficit
weighted round-robin (SDWRR)
• 802.1p, DSCP /IP precedence trust and marking
• L2-L4 classification criteria: Interface, MAC address, Ethertype,
802.1p, VLAN, IP address, DSCP/IP precedence, TCP/UDP port
numbers
• RFC 1155 Structure of Management Information (SMI)
• RFC 1157 SNMPv1
• RFC 1905 RFC 1907 SNMP v2c, SMIv2 and revised MIB-II
• RFC 2570-2575 SNMPv3, user-based security, encryption, and
authentication
• RFC 2576 Coexistence between SNMP Version 1, Version 2 and
Version 3
• RFC 1212, RFC 1213, RFC 1215 MIB-II, Ethernet-like MIB, and TRAPs
• RFC 2578 SNMP Structure of Management Information MIB
• RFC 2579 SNMP Textual Conventions for SMIv2
• RFC 2925 Ping/traceroute MIB
• RFC 2665 Ethernet-like interface MIB
• RFC 1643 Ethernet MIB
• RFC 1493 Bridge MIB
• RFC 2096 IPv4 Forwarding Table MIB
• RFC 2011 SNMPv2 for IP using SMIv2
• Congestion avoidance capabilities: Tail drop
• RFC 2012 SNMPv2 for transmission control protocol using SMIv2
Multicast
• RFC 2863 Interface MIB
• IGMP snooping entries: 1,000
• IGMP: v1, v2, v3
• IGMP snooping
• PIM-SM, PIM-SSM, PIM-DM
• RFC 2013 SNMPv2 for user datagram protocol using SMIv2
• RFC 3413 SNMP Application MIB
• RFC 3414 User-based security model for SNMPv3
• RFC 3415 View-based Access Control Model for SNMP
• RFC 3621 PoE-MIB (PoE switches only)
Services and Manageability
• RFC 1724 RIPv2 MIB
• Junos OS CLI
• RFC 2863 Interface Group MIB
• Web interface (J-Web)
• RFC 2819 RMON MIB
• Out-of-band management: Serial, 10/100BASE-T Ethernet
• RFC 2287 System Application Packages MIB
• ASCII configuration
• RFC 4188 STP and extensions MIB
• Rescue configuration
• Configuration rollback
• RFC 4363 Definitions of managed objects for bridges with traffic
classes, multicast filtering, and VLAN extensions
• Image rollback
• RFC 2922 LLDP MIB
• Element management tools: Junos Space Network Management
Platform
• Draft – blumenthal – aes – usm - 08
• Draft – reeder - snmpv3 – usm - 3desede -00
• Real-time Performance Monitoring (RPM)
*Each switch comes with RJ-45-to-DB-9 serial port adapter, 19’’ rack mount kit and connector
retainer. Each system also ships with a power cord for the country for which it is shipped.
7
Specifications (continued)
Troubleshooting
Noise Specifications
• Debugging: CLI via console, telnet, or SSH
Noise measurements based on operational tests taken from
bystander position (front) and performed at 25° C in compliance
with ISO 7779
• Diagnostics: Show and debug command statistics
• Traffic mirroring (port)
• Traffic mirroring (VLAN)
Model
Acoustic Noise in DBA
• ACL-based mirroring
EX2200-24T-4G
32.7
EX2200-24P-4G
37.2
EX2200-48T-4G
33.5
EX2200-48P-4G
38.1
• Mirroring destination ports per system: 1
• LAG port monitoring
• Multiple destination ports monitored to 1 mirror (N:1)
• Maximum number of mirroring sessions: 1
• Mirroring to remote destination (over L2): 1 destination VLAN
Telco
• IP tools: Extended ping and trace
• CLEI code
• Juniper Networks commit and rollback
Juniper Networks Services and Support
Warranty
• Enhanced limited lifetime switch hardware warranty
Safety Certifications
• UL-UL60950-1 (Second Edition)
• C-UL to CAN/CSA 22.2 No.60950-1 (Second Edition)
• TUV/GS to EN 60950-1 (Second Edition)
• CB-IEC60950-1 (Second Edition with all country deviations)
• EN 60825-1 (Second Edition)
Electromagnetic Compatibility Certifications
• FCC 47CFR Part 15 Class A
• EN 55022 Class A
• ICES-003 Class A
• VCCI Class A
• AS/NZS CISPR 22 Class A
• CISPR 22 Class A
• EN 55024
• EN 300386
• CE
NEBS
• GR-63-Core: NEBS, Physical Protection
• GR-1089-Core: EMC and Electrical Safety for Network
Telecommunications Equipment
• All models except EX2200-24P-4G, EX2200-48P-4G and
EX2200-24T-4G-DC
Telecom Quality Management
• TL9000
Environmental
• Reduction of Hazardous Substances (ROHS) 6
8
Juniper Networks is the leader in performance-enabling services
that are designed to accelerate, extend, and optimize your
high-performance network. Our services allow you to maximize
operational efficiency while reducing costs and minimizing
risk, achieving a faster time to value for your network. Juniper
Networks ensures operational excellence by optimizing the
network to maintain required levels of performance, reliability, and
availability. For more details, please visit www.juniper.net/us/en/
products-services.
Ordering Information
Model Number
Description
Switches*
Model Number
Description
Pluggable Optics
EX2200-24T-4G
24-port 10/100/1000BASE-T Ethernet Switch
with four SFP Gigabit Ethernet
uplink ports
EX-SFP-1FE-FX
SFP 100BASE-FX; LC connector; 1310 nm;
2 km reach on multimode fiber
EX2200-24P-4G
24-port 10/100/1000BASE-T Ethernet Switch
with PoE+ and four SFP Gigabit Ethernet
uplink ports
EX-SFP-FE20KT13R15
SFP 100BASE-BX; LC connector; TX 1310
nm/RX 1550 nm; 20 km reach on singlestrand, single-mode fiber
EX2200-48T-4G
48-port 10/100/1000BASE-T Ethernet Switch
with four SFP Gigabit Ethernet
uplink ports
EX-SFP-FE20KT15R13
SFP 100BASE-BX; LC connector; TX 1550
nm/RX 1310 nm; 20 km reach on single-strand,
single-mode fiber
EX2200-48P-4G
48-port 10/100/1000BASE-T Ethernet Switch
with PoE+ and four SFP Gigabit Ethernet
uplink ports
EX-SFP-1GE-T
SFP 10/100/1000BASE-T copper; RJ-45
connector; 100 m reach on UTP
EX2200-24T-4G-DC
24-port 10/100/1000BASE-T Ethernet Switch
with four SFP Gigabit Ethernet uplink ports
and internal DC power supply
EX-SFP-1GE-SX
SFP 1000BASE-SX; LC connector; 850 nm;
550 m reach on multimode fiber
EX-SFP-1GE-LX
EX2200-24P-4G-TAA
Trade Agreement Act-compliant, 24-port
10/100/1000BaseT (24-ports PoE) with 4
SFP uplink ports
SFP 1000BASE-LX; LC connector; 1310 nm;
10 km reach on single-mode fiber
EX-SFP-1GE-LH
SFP 1000BASE-LH; LC connector; 1550 nm;
70 km reach on single-mode fiber
EX2200-24T-4G-TAA
Trade Agreement Act-compliant, 24-port
10/100/1000BaseT with 4 SFP uplink ports
EX-SFP-1FE-LH
EX2200-48P-4G-TAA
Trade Agreement Act-compliant, 48-port
10/100/1000BaseT (48-ports PoE+) with 4
SFP uplink ports
SFP 100BASE-LX; LC connector; 1310 nm;
80 km reach on single-mode fiber
EX-SFP-1FE-LX
SFP 100BASE-LX; LC connector; 1310 nm;
10 km reach on single-mode fiber
Trade Agreement Act-compliant, 48-port
10/100/1000BaseT with 4 SFP uplink ports
EX-SFP-1FE-LX40K
SFP 100BASE-LX; LC connector; 1310 nm;
40 km reach on single-mode fiber
EX-SFP-1GE-LX40K
SFP 1000BASE-LX; LC connector; 1310 nm; 40
km reach on single-mode fiber
EX-SFP-GE10KT13R14
SFP 1000BASE-BX; TX 1310 nm/RX 1490
nm for 10 km transmission on single-strand,
single-mode fiber
EX-SFP-GE10KT13R15
SFP 1000BASE-BX; TX 1310 nm/RX 1550
nm for 10 km transmission on single-strand,
single-mode fiber
EX-SFP-GE10KT14R13
SFP 1000BASE-BX; TX 1490 nm/RX 1310
nm for 10 km transmission on single-strand,
single-mode fiber
EX-SFP-GE10KT15R13
SFP 1000BASE-BX; TX 1550 nm/RX 1310
nm for 10 km transmission on single-strand,
single-mode fiber
EX-SFP-GE40KT13R15
SFP 1000BASE-BX; TX 1310 nm/RX 1550
nm for 40 km transmission on single-strand,
single-mode fiber
EX-SFP-GE40KT15R13
SFP 1000BASE-BX; TX 1550 nm/RX 1310
nm for 40 km transmission on single-strand,
single-mode fiber
EX2200-48T-4G-TAA
Mounting Options
EX-RMK
Rack mount kit for EX2200
EX-4PST-RMK
Adjustable 4-post Rack mount kit for EX2200
EX-WMK-BFL
Wall mount kit with baffle for EX2200
Enhanced Feature License
EX-24-EFL
EX-48-EFL
Enhanced Feature License for EX 220024T and EX2200-24P switches. Includes
licenses for OSPF v1/v2, IGMP v1/v2/v3, PIM,
IEEE 802.1Q-in-Q, Real-time Performance
Monitoring (RPM), IEEE 802.1ag (Connectivity
Fault Management).
Enhanced Feature License for EX 220048T and EX2200-48P switches. Includes
licenses for OSPF v1/v2, IGMP v1/v2/v3, PIM,
IEEE 802.1Q-in-Q, Real-time Performance
Monitoring (RPM), IEEE 802.1ag (Connectivity
Fault Management).
About Juniper Networks
Juniper Networks is in the business of network innovation. From
devices to data centers, from consumers to cloud providers,
Juniper Networks delivers the software, silicon and systems that
transform the experience and economics of networking. The
company serves customers and partners worldwide. Additional
information can be found at www.juniper.net.
9
10
11
Corporate and Sales Headquarters
APAC Headquarters
EMEA Headquarters
Juniper Networks, Inc.
Juniper Networks (Hong Kong)
Juniper Networks Ireland
1194 North Mathilda Avenue
26/F, Cityplaza One
Airside Business Park
Sunnyvale, CA 94089 USA
1111 King’s Road
Swords, County Dublin, Ireland
Phone: 888.JUNIPER (888.586.4737)
Taikoo Shing, Hong Kong
Phone: 35.31.8903.600
or 408.745.2000
Phone: 852.2332.3636
EMEA Sales: 00800.4586.4737
Fax: 408.745.2100
Fax: 852.2574.7803
Fax: 35.31.8903.601
www.juniper.net
Copyright 2012 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Junos,
NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other
countries. All other trademarks, service marks, registered marks, or registered service marks are the property of
their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper
Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
1000307-015-EN Nov 2012
12
Printed on recycled paper
To purchase Juniper Networks solutions,
please contact your Juniper Networks
representative at 1-866-298-6428 or
authorized reseller.