Polycom 2200-23809-001 microphone

Polycom® SoundStructure® System
Product Accessory Guide
Polycom® SoundStructure® Series
Product Accessory Guide
Below are accessories that can be used with SoundStructure installed audio solutions. For more
information on how to use these options, please refer to the SoundStructure documentation.
Product/Part Number
Product Compatibility Description
Polycom Touch Control
2200-30070-001
Can be used with
Polycom Touch Control
SoundStructure C-Series functions as a highly-intuitive,
products
easy-to-use interface for
SoundStructure C-Series
solutions
Polycom HDX Ceiling
Microphone Array
Can be used with any
SoundStructure product
HDX Ceiling Microphone
Array: Black or White
Spherical Array, three
microphone elements pick up
audio in a 360-degree pattern
around the mic, w/ 2ft/60cm
drop cable, Electronics
Interface, RJ45 Wall Plate
with 10ft/3m CLink Straight
Through cable, 50ft/15m
CLink2 Crossover cable.
Polycom HDX Ceiling
Microphone Extension Kit
Can be used with any
SoundStructure product
using HDX Ceiling
2200-23810-001 (Black) Microphone Array.
2200-23810-002 (White)
HDX Ceiling Microphone
Extension Kit: Black or
White Spherical Array, three
microphone elements pick up
audio in a 360-degree pattern
around the mic, w/ 2ft/60cm
drop cable, Electronics
Interface, 25ft/7.6m CLink2
Crossover cable.
HDX Ceiling Microphone
Drop Cable
Extended length “drop cable”
for connecting Spherical
Ceiling Microphone Array
element to electronics
interface. 6ft/1.8m long.
2200-23809-001 (Black)
2200-23809-002 (White)
Can be used with any
SoundStructure product
using HDX Ceiling
2457-26764-072 (Black) Microphone Array.
2457-26765-072 (White)
Photo
Product/Part Number
Product Compatibility Description
Polycom HDX Mica
Microphone Array
Can be used with any
SoundStructure product
HDX Table Microphone Array,
three microphone elements
pick up audio in a 360-degree
pattern around the mic,
w/15ft cable. Walta connector
requires a conversion dongle
to connect to SoundStructure
device. Use Walta Female to
RJ-45 Male Cable with HDX
Microphone Cable, or use
CLink2 CrossOver Cable with
Walta Male to RJ-45 Female
Cable.
Can be used with any
SoundStructure product
OBAM cable (12in) links
multiple SoundStructure units
in same rack. Included with
SoundStructure product.
Can be used with any
SoundStructure product
OBAM cable links multiple
SoundStructure units up to 40
feet apart.
SoundStructure Accessory Can be used with any
Kit
SoundStructure product
SoundStructure Accessory Kit
contains: twelve (12) 3.5mm
Phoenix-type screw-terminal
blocks that terminate audio
input and output connections.
2215-23327-001
OBAM cable (12in)
2457-17625-001
OBAM Cable (40ft.)
2200-43229-001
2215-80031-001
Walta Male to RJ45
Female Cable (18in)
2457-25646-001
Can be used with any
SoundStructure product
Walta Male to RJ45
Female Adapter Cable,
18-inches. For connecting
HDX8000, 7000, 6000 &
4000 to SoundStructure
device, or HDX Table
Microphone Array to any
SoundStructure product, use
with CLink2 CrossOver Cable
(2457-23574-001).
Photo
Polycom® SoundStructure® Series Product Accessory Guide
Product/Part Number
Product Compatibility Description
Walta Female to RJ45
Male Cable (12in)
Can be used with any
SoundStructure product
2457-23716-001
Conference Link2 cable
(18in)
2457-23574-001
Conference Link2 cable
Walta Female to RJ45
Male Adapter Cable, 12in.
For connecting HDX Table
Microphone Array to any
SoundStructure product,
use with Polycom HDX
Microphone Cable 15ft
(2457-23215-001) or 25ft
(2457-23216-001).
HDX900x systems link to CLink2 Crossover cable,
SoundStructure in same 18in. Shielded, plenum-rated,
rack
CAT5e, special length for
HDX link to SoundStructure
in same rack, use with Walta
Male to RJ-45 Female Cable
(2457-25646-001). Included
with SoundStructure product.
Can be used with any
SoundStructure product
CLink2 Crossover cable,
25ft. Shielded, plenum-rated,
CAT5e. RJ-45 connectors
link to any SoundStructure
product. Use for connecting
between multiple HDX
Ceiling Microphone Arrays,
or use with Walta Male
to RJ-45 Female Cable
(2457-25646-001) to
connect to HDX Table
Microphone Array.
Polycom HDX Microphone Can be used with any
Cable
SoundStructure product
Walta to Walta microphone
cable, 15ft. Connects
SoundStructure to HDX Table
Microphones. Use with Walta
Female to RJ-45 Male Cable
(2457-23716-001).
2200-24009-001 (25ft)
2200-24008-001 (50ft)
2200-24010-001 (100ft)
2457-23215-001 (15ft)
2457-23216-001 (25ft)
2457-29051-001 (50ft)
Photo
Product/Part Number
Product Compatibility Description
Reinforced Rack ears
Can be used with any
SoundStructure product
Reinforced rack ears for
mounting SoundStructure in
rack. Includes chassis screws.
Included with SoundStructure
product.
Can be used with any
SoundStructure product
Single line PSTN interface for
SoundStructure devices.
Can be used with any
SoundStructure product
Dual line PSTN interface for
SoundStructure devices.
Can be used with any
SoundStructure product
VoIP telephony interface for
SoundStructure devices
Can be used with any
SoundStructure product
Audio adapter for 2 Phoenix
ports to 2 RCA (Female)
Can be used with any
SoundStructure product
2 12in RCA male to 3.5mm
phoenix connectors for
interfacing Vortex products to
“Vortex-ready” Soundstation
VTX 1000 or to Polycom
video codecs. White and Black
color coded connectors
2200-33199-001
SoundStructure TEL1
2200-35003-001
SoundStructure TEL2
2200-35004-001
SoundStructure VoIP
Interface
2200-35005-001
Audio Adapter Cable
2457-23492-001
RCA to mini phoenix
cables
2215-07766-001
Photo
Product/Part Number
Product Compatibility Description
Polycom HDX IR Remote
Control
2201-52556-001
Can be used with any
SoundStructure product
equipped with external IR
receiver
HDX remote control for use
with HDX Series codecs,
English version. Requires an
external IR receiver (such
as the Dinky Link from
Xantech) connected to the
SoundStructure rear panel IR
receiver port.
SoundStructure Logic
Connector
Can be used with any
SoundStructure product
Single DB25 connector.
Simplifies wiring to DB25
“Remote Control 1” or “2” logic
ports. No soldering required.
Cable strain-relief built in.
2200-43228-001
Photo
Headset Interface Adapter Can be used with
Enables direct audio
SoundStructure C-Series connection between most
2200-33206-001
products
business phones and a
SoundStructure system via
the phone’s headset interface.
Use the phone to initiate a call
and press the headset button
to send the audio to and from
the SoundStructure system
for in-room audio processing.
Headset Interface Adapter Can be used with
For use with phones that do
SoundStructure C-Series not have an RJ-9 interface
2200-11095-002
products
Learn More
Visit us at www.polycom.com for more information on Polycom SoundStructure solutions and accessories
or contact us at 1.800.POLYCOM.
©2011 Polycom, Inc. All rights reserved.
Polycom and the Polycom logo design are registered trademarks of Polycom, Inc. in the U.S. and various countries.
All other trademarks are the property of their respective owners. Information in this document is subject to change without notice
www.polycom.com
Polycom Headquarters
4750 Willow Road
Pleasanton, CA 94588
1.800.POLYCOM or
+1.925.924.6000
Polycom EMEA
270 Bath Road
Slough
Berkshire SL1 4DX
+44 (0)1753 723000
Polycom Asia Pacific
8 Shenton Way
#11-01 Temasek Tower
Singapore 068811
+65.6389.9200
3146_0611