Mobile In-ear iPhone Cover_EU AP_5x3.5.fm Page 1 Wednesday, September 1, 2010 11:07 AM
BOSE® MIE2I MOBILE HEADSET
©2010 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM329190 Rev.02
BOSE® MIE2I MOBILE HEADSET
|
|
|
|
|
01_YoYo_MIKEY_ENG.fm Page 1 Wednesday, September 1, 2010 11:02 AM
English
Welcome
Thank you for purchasing the Bose® MIE2i mobile headset for
select Apple products. The Bose® MIE2i mobile headset offers a
combination of lifelike audio performance and comfortable fit
not available from most conventional headsets.
Microphone
(back of button)
Volume up
Answer/End button
Volume down
For use with:
Clothing clip
Adjustment slider
StayHear™
tips
Large
(black)
Compatible with MacBook and MacBook Pro computers.
Carrying case
Register your product
Medium
(grey)
Small
(white)
Now is a good time to register your headset. You can do this
easily by going to http://global.Bose.com/register.
This product conforms to all EU Directive requirements as
applicable by law. The complete Declaration of Conformity
can be found at www.Bose.com/compliance.
left
right
left
right
left
right
*Headset comes with medium StayHear™ tips attached.
Connecting to your Apple device
You can connect the headset to the standard 3.5 mm
headphone jack on your iPhone, iPod, or other Apple product.
ENGLISH
1
01_YoYo_MIKEY_ENG.fm Page 2 Wednesday, September 1, 2010 11:02 AM
English
Using the headset with your Apple device
Call-related functions
The Bose® MIE2i mobile headset includes a small in-line remote
with an integrated microphone. This offers an easy to access
Answer/End and volume control buttons.
Note: Full controls may not be available for some Apple products.
The remote and mic are supported only by iPod nano (4th and
5th generation), iPod classic (120GB, 160GB only), iPod touch
(2nd and 3rd generation), iPhone 3GS, iPhone 4, and iPad. The
remote is supported by iPod shuffle (3rd generation). Audio is
supported by all iPod models. Requires latest iPod software.
Answer a call
End a call
Decline an incoming
call
Switch to an
incoming or on-hold
call and put the
current call on hold
Switch to an
incoming or on-hold
call and end the
current call
Use Voice Control
Headset controls
Volume up
Answer/End
When you receive an incoming call, press
and release the Answer/End button to
answer
Press and release the Answer/End
button.
Press and hold the Answer/End button
for about two seconds, then release.
While on a call, press and release the
Answer/End button once. Press and
release again to switch back to the first
call.
While on a call, press and hold the
Answer/End button for about two
seconds, then release.
Press and hold the Answer/End button.
See iPhone User Guide for compatibility
and usage information about this feature.
Media playback functions
Play or pause a song
or video
Skip to the next song
or chapter
Fast-forward
Volume down
Go to the previous
song or chapter
Rewind
Basic functions
Increase volume
Decrease volume
Press and release the + button.
Press and release the – button.
2
Press and release the Answer/End
button.
Press and release the Answer/End
button twice quickly.
Press and release the Answer/End
button twice quickly and hold the second
press.
Press and release the Answer/End
button three times quickly.
Press and release the Answer/End
button three times quickly and hold the
third press.
01_YoYo_MIKEY_ENG.fm Page 3 Wednesday, September 1, 2010 11:02 AM
English
Importance of Proper Fit
Changing ear tips
When you wear the headset properly, it provides the comfort
and clarity you expect from Bose®.
Select the type and size of eartip that provides you with the best
comfort and fit.
1. Gently peel the edges of the attached tip away from the
earpiece, using care not to tear the tip.
CAUTION: To prevent damage, do not pull on the
StayHear™ tip wing.
Fitting the headphones to your ear
The headphone earpiece has a soft StayHear™ tip attached,
allowing it to rest comfortably in the bowl of your ear. The wing
part of the tip fits just under your ear ridge.
Note: Each tip is marked with a either an L or an R
to indicate which earpiece it is for. Be sure to attach
the left StayHear™ tip to the left earpiece and the
right StayHear™ tip to the right earpiece.
To determine if the tip is the right size:
1. Insert the earpiece into the canal just enough
for the headphone to rest lightly against your ear.
2. Tilt the headphone back and press the tip wing under the ear
ridge until it is secure.
The tips should fit comfortably yet securely in the bowl of the
ear.
1
2. Position the opening of the new tip over the nozzle and the
small slot over the nozzle hook.
Note: Each tip is marked with a either an L or an R to indicate
which earpiece it is for. Be sure to attach the left StayHear™ tip to
the left earpiece and the right StayHear™ tip to the right earpiece.
3. Ease the base of the tip down around the base of the
earpiece until the tip feels secured.
StayHear™ tips
2
1
3
2
3
01_YoYo_MIKEY_ENG.fm Page 4 Wednesday, September 1, 2010 11:02 AM
English
Adjusting for comfort and stability
Troubleshooting
There are several ways you can adjust your headset to provide
additional comfort and stability. Using the adjustment slider and
clothing clip you can customize how you wear your headset.
If you experience any trouble using your headset, try the following
troubleshooting instructions. If you still need help, see the contact
information on the inside back cover for assistance in your area.
Problem
Using the adjustment slider
What to do
No audio/Intermittent •
Move the adjustment slider up or down to reduce
or increase the amount of loose cord between the
left and right earpiece. Finding the right position
for the slider can help optimize the placement of
the Answer/End button and integrated
microphone.
Excessive bass
Microphone is not
picking-up sound
•
•
•
•
Using the clothing clip
Use the clothing clip to fasten the cable to
your clothing, for convenience, stability, and
to help manage the cable. This can be helpful
during high-movement activities or when
using the headset in a single earpiece
configuration.
Phone not
•
responding to button
presses
•
Apple product not
•
responding to remote
Ear tips falling off
•
Using a single earpiece
The Bose® MIE2i mobile headset can be used with only the
right (R) earpiece in your ear. This allows you to take calls and
still hear surrounding sounds.
Lost ear tip
Sound is muffled
from earpiece
•
•
•
•
4
Make sure that the headset plug is securely
connected to the headphone jack.
Try another audio device.
Turn off any audio enhancement features on
the audio source.
Make sure that the headset plug is securely
connected to the headphone jack.
Make sure the microphone is not being
blocked or covered
The microphone is located on the back of the
Answer/End button (you may notice the
small opening for the microphone).
Make sure that the headset plug is securely
connected to the headphone jack.
For multi-press functions: Vary speed of
presses.
Full controls may not be available for some
Apple products.
Make sure the ear tips are securely attached
to the earpiece and nozzle hook.
Visit owners.Bose.com for replacement tips.
Make sure ear tips and headset nozzles are
clear of any debris or wax build-up.
Unplug the headset from the audio source,
then plug back in making sure they are
securely connected.
Try another audio device.
01_YoYo_MIKEY_ENG.fm Page 5 Wednesday, September 1, 2010 11:02 AM
English
Cleaning
Limited Warranty
Your headset may require periodic cleaning:
• Ear tips: First, remove them from the headset and wash
the tips with a mild detergent and water. Make sure you
thoroughly rinse and dry them before putting them back
on the headset.
• Headset nozzles, Microphone, Answer/End, Volume buttons:
Clean only with a dry, soft cotton swab or equivalent.
Never insert any cleaning tool into the nozzle or microphone
opening.
Your Bose® MIE2i mobile headset is covered by a limited
warranty. Details of the limited warranty are provided on the
product registration card that is included in the carton. Please
refer to the card for instructions on how to register. Failure to
register will not affect your limited warranty rights.
What you must do to obtain Limited Warranty service
Return the product, with proof of purchase from an authorized
Bose dealer, using the following procedures:
1. Contact the Bose organization in your country/region (visit
Global.Bose.com for contact information in your country/
region) for specific return and shipping instructions.
2. Label and ship the product, freight prepaid, to the address
provided by the Bose organization in your country.
3. Place any necessary Return Authorization Number
prominently on the outside of the carton. Cartons not
bearing a Return Authorization Number, where required,
will be refused.
WARNINGS:
• Contains small parts which may be a choking hazard.
Not suitable for children under age 3.
• This product contains magnetic material.
• Long-term exposure to loud music may cause hearing
damage. It is best to avoid high volume levels when using
headphones, especially for extended periods.
• Use caution when using your headset/headphones while
operating a vehicle or engaging in any activity that requires
your full attention. Check and follow local laws regarding
mobile phone and headset/headphones use. Some jurisdictions impose specific limitations, such as single earpiece
configuration, on the use of such products while driving.
©2010 Bose Corporation. No part of this work may be reproduced, modified, distributed,
or otherwise used without prior written permission.
Apple, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, iPod touch and MacBook are
trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of
Apple Inc.
CAUTIONS:
• Sounds that you rely on as reminders or warnings may have an
unfamiliar character when using headphones. Be aware of how
these sounds may vary in character so you can recognize them
as needed.
• Do not drop, sit on, or allow the headset to be immersed in
water.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and
has been certified by the developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPod, iPhone, or iPad may
affect wireless performance.
5
Mobile In-ear iPhone Cover_EU AP_5x3.5.fm Page 1 Wednesday, September 1, 2010 11:07 AM
BOSE® MIE2I MOBILE HEADSET
©2010 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM329190 Rev.01
BOSE® MIE2I MOBILE HEADSET
|
|
|
|
|