Main Unit ................................................................ 8
EN
Weather Day & Night
Model: BAR339DP / BAR339DPA /
BAR339DPU / BAA339DPH
Remote RF Clock Thermo Sensor ......................... 8
Precautions .............................................................. 8
About Oregon Scientific ......................................... 9
USER MANUAL
EU-Declaration of Conformity ................................ 9
FCC Statement ......................................................... 9
CONTENTS
Declaration of Conformity .................................... 10
Overview................................................................... 2
Front View .............................................................. 2
Back View .............................................................. 3
Remote Sensor ...................................................... 3
Getting Started......................................................... 3
Main Unit Installation ............................................. 3
Remote Sensor Installation.................................... 4
Clock ......................................................................... 5
Clock Reception ..................................................... 5
Manually set Clock ................................................. 6
Alarm ........................................................................ 6
Weather Forecast .................................................... 6
Temperature ............................................................ 7
Projection ................................................................. 7
Backlight .................................................................. 7
Reset ......................................................................... 7
Specifications .......................................................... 8
1
BAR339DP_M_EN_R6.indd 1
6/18/08 12:29:43 PM
EN
display; activate / deactivate auto-scan
11.
Main unit batteries low / no battery
12. Projector: Project time / outdoor temperature and
weather forecast
OVERVIEW
FRONT VIEW
13.
14.
15.
16.
17.
18.
19.
Indicate indoor / outdoor sensor reception
status
Outdoor Temperature (Current / Max / Min)
Clock
Time Zone Offset
Calendar with weekday / seconds
ALARM: View alarm status / set alarm
MEM: Toggle between current / maximum /
minimum temperature display; clear records
1. SNOOZE: Activate snooze alarm; turn on backlight;
flip projected image 180º
2. Weather forecast
3.
Outdoor remote sensor battery low
4.
Radio controlled clock reception icon
5. PM: Indicates PM (12 hour mode)
6.
Indicate alarm time is displayed
7.
Indicate daily alarm is On
8. PM: Indicates PM (12 hour mode)
9. CLOCK: Change display; set clock
10. TEMP: Toggle between indoor / outdoor temperature
2
BAR339DP_M_EN_R6.indd 2
6/18/08 12:30:06 PM
EN
BACK VIEW
9. Battery compartment
REMOTE SENSOR
FRONT VIEW
BACK VIEW
5
1
2
6
3
4
1. FOCUS Wheel: Adjust projection focus
2. AC/DC Adaptor socket
3.
/
: Decrease / increase value of the setting;
enable / disable clock reception
4. SEARCH: Initiate sensor search
5. °C / °F: Select temperature unit
6. LIGHT ON/OFF: Turn backlight continuously On
(adaptor installed) / only when SNOOZE key is
pressed
7. RESET: Reset unit to default settings
8. PROJECTION OFF- CLOCK - AUTO: Select
projection display
BAR339DP_M_EN_R6.indd 3
1.
2.
3.
4.
5.
6.
RESET: Reset unit to default settings
EU / UK Switch (RTHN318D sensor only)
Channel Switch
Double sided adhesive tape
Wall mount hole
Battery compartment
GETTING STARTED
MAIN UNIT INSTALLATION
3
Batteries serve as a back-up power supply. For
continuous use of projector and backlight, install
adapter.
6/18/08 12:30:38 PM
EN
•
Plug AC/DC adaptor into socket. Make sure the
adapter is not obstructed and is easily accessible
to the unit.
The sensor reception icon shows the status:
ICONS
To completely disconnect from power, the adapter
should be disconnected from the main unit.
Main unit is searching
for sensor(s)
NOTE The main unit and adapter should not be
exposed to wet conditions. No objects filled with liquid,
such as vases, should be placed on the main unit and
adapter.
A sensor channel
has been found and
logged on
Memory backup:
1. Remove the battery compartment cover.
2. Insert the batteries, matching the polarities.
No sensor found
NOTE Batteries should not be exposed to excessive
heat such as sunshine or fire.
NOTE After every sensor initialisation, the main unit
may take up to 30 minutes to receive the time from
the sensor.
REMOTE SENSOR INSTALLATION
1.
2.
3.
4.
5.
6.
7.
MEANING
Slide open the battery door.
Slide channel switch to channel 1.
Select EU/UK. (RTHN318D only)
Insert the battery, matching the polarities (+ / -).
Press RESET after each battery change.
Close the battery door.
Press and hold SEARCH on main unit to initiate
search and start receiving time and temperature
data from the sensor.
8. Secure the sensor in the desired location using the
wall mount hole or double sided adhesive tape.
4
BAR339DP_M_EN_R6.indd 4
6/18/08 12:30:50 PM
EN
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures
below freezing.
CLOCK
CLOCK RECEPTION
This product is designed to synchronize its clock
automatically with a clock signal received from
provided remote sensor.
To enable / disable signal reception:
Press and hold
to enable or
to disable signal
reception.
For best results:
• Place the sensor within 30 m (100 ft) of the main
unit.
• Place the sensor out of direct sunlight and
moisture.
• Position the sensor so that it faces the main unit,
minimizing obstructions such as doors, walls and
furniture.
• Place the sensor in a location with a clear view to
the sky, away from metallic / electronic objects.
• Position the sensor close to the main unit during
cold winter months as below-freezing temperatures
may affect battery performance and signal
transmission.
TIP The transmission range may vary depending
on many factors. You may need to experiment with
various locations to get the best results.
BAR339DP_M_EN_R6.indd 5
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.
Clock signal reception indicator:
STRONG SIGNAL
WEAK / NO SIGNAL
NOTE Clock reception is dependent on the successful
transmission of data from remote sensor. If
is
displayed, press RESET on sensor and press
and
on the main unit and ensure sensor
successfully logged.
has been
5
6/18/08 12:31:03 PM
EN
3. Press ALARM to confirm.
indicates alarm is on.
MANUALLY SET CLOCK
To set the clock manually, disable the clock signal
reception first.
1. Press and hold CLOCK.
2. Press
/
to change the settings.
3. Press CLOCK to confirm.
To activate / deactivate alarm:
1. Press ALARM to display alarm time.
2. Press ALARM again to turn alarm on / off.
The settings order is: time zone, 12/24 hr format,
hour, minute, year, calendar mode (month – day / day
– month), month, day and language.
To silence the alarm:
• Press SNOOZE to silence it for 8 minutes
OR
• Press any key to turn the alarm off and activate it
again after 24 hours.
BAR339DP: Time zone offset sets the clock +/- 23
hours from the received clock signal time.
WEATHER FORECAST
NOTE If you enter + 1 in the time offset setting, this will
give you your local time plus one hour. If you are in the
US (BAR339DPA only) set the clock to:
0 for Pacific time
+2 for Central time
This product forecasts the next 12 to 24 hours of
weather within a 30-50 km (19-31 mile) radius with a
75% accuracy.
+1 for Mountain time
+3 for Eastern time
Main unit
Projector
Sunny
NOTE The language options are English (E), Spanish (S),
Italian (I), French (F), German (D), and Russian (R).
Partially Cloudy
To select clock display mode:
Press CLOCK to toggle between clock with seconds,
clock with weekday.
Cloudy
ALARM
Rainy
To set the alarm:
1. Press and hold ALARM.
2. Press
/
to change the settings.
Snowy
BAR339DP_M_EN_R6.indd 6
6
6/18/08 12:31:20 PM
To project weather forecast and time:
• Press SNOOZE when PROJECTION switch is in
OFF mode
To toggle between indoor / outdoor temperature
display:
Press TEMP.
OR
•
To toggle temperature unit:
Press °C / °F.
Slide PROJECTION switch to CLOCK mode for
continuous display.
To auto-scan between sensors:
Press and hold TEMP.
To project weather forecast and activate toggling
display of time / outdoor temperature:
• Slide PROJECTION switch to AUTO mode.
To deactivate auto-scan function:
Press TEMP.
To deactivate projection:
• Slide PROJECTION switch to OFF mode.
To toggle between current, minimum and maximum
records for indoor / outdoor:
Press MEM repeatedly.
To focus image:
• Turn FOCUS wheel.
NOTE If projection is illuminated, do not look directly
into the projector.
To clear records:
Press and hold MEM.
BACKLIGHT
PROJECTION
To activate continuous backlight:
• Slide LIGHT – ON / OFF switch to ON.
This unit projects time, outdoor temperature information
and weather forecast for your convenience.
To deactivate continuous backlight:
• Slide LIGHT – ON / OFF switch to OFF (Press
SNOOZE to activate LED backlight for 5 seconds).
NOTE Install adapter to use projection feature.
To flip projected image by 180°:
• Press SNOOZE.
RESET
7
BAR339DP_M_EN_R6.indd 7
EN
TEMPERATURE
Press RESET to return to the default settings.
6/18/08 12:31:25 PM
EN
SPECIFICATIONS
PRECAUTIONS
MAIN UNIT
•
TYPE
DESCRIPTION
•
LxWxH
142 x 42 x 158 mm
(5.59 x 1.65 x 6.22 in)
•
Weight
270g (9.52 oz) without battery
Power
5V AC adaptor
2 x CR2032 batteries
(for backup)
•
•
•
•
REMOTE RF CLOCK THERMO SENSOR
•
TYPE
DESCRIPTION
LxWxH
64 x 25 x 98 mm
(2.52 x 0.98 x 3.86 in)
Weight
80 g (2.8 oz) without battery
Temperature range
-20°C to 60°C (-4°F to 140°F)
Resolution
0.1°C (0.2°F)
•
Signal frequency
433 MHz
•
Transmission range
30 m (98 ft) unobstructed
No. of channels
5
Power
1 x UM-3 (AA) 1.5 V batteries
•
•
Do not subject the unit to excessive force, shock,
dust, temperature or humidity.
Do not cover the ventilation holes with any items
such as newspapers, curtains etc.
Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
Do not clean the unit with abrasive or corrosive
materials.
Do not tamper with the unit’s internal components.
This invalidates the warranty.
Only use fresh batteries. Do not mix new and old
batteries.
Images shown in this manual may differ from the
actual display.
When disposing of this product, ensure it is
collected separately for special treatment and not
as normal household waste.
Placement of this product on certain types of
wood may result in damage to its finish for which
Oregon Scientific will not be responsible. Consult
the furniture manufacturer’s care instructions for
information.
The contents of this manual may not be reproduced
without the permission of the manufacturer.
Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for
special treatment is necessary.
Please note that some units are equipped with a
battery safety strip. Remove the strip from the
battery compartment before first use.
8
BAR339DP_M_EN_R6.indd 8
6/18/08 12:31:26 PM
EN
NOTE The technical specifications for this product and
the contents of the user manual are subject to change
without notice.
COUNTRIES RTTE APPROVAL COMPLIED
All EU countries, Switzerland CH
and Norway N
NOTE Features and accessories will not be available
in all countries. For more information, please contact
your local retailer.
FCC STATEMENT
ABOUT OREGON SCIENTIFIC
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Visit our website (www.oregonscientific.com) to learn
more about Oregon Scientific products. If you’re in
the US and would like to contact our Customer Care
department directly, please visit:
www2.oregonscientific.com/service/support.asp
For international inquiries, please visit:
www2.oregonscientific.com/about/international.asp
WARNING Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Weather
Day & Night (Model: BAR339DP / BAR339DPA /
BAR339DPU / BAA339DPH) is in compliance with the
essential requirements and other relevant provisions
of Directive 1999/5/EC. A copy of the signed and dated
Declaration of Conformity is available on request via
our Oregon Scientific Customer Service.
NOTE This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
9
BAR339DP_M_EN_R6.indd 9
6/18/08 12:31:29 PM
EN
Manufacturer:
Address:
IDT Technology Limited
Block C, 9/F, Kaiser Estate,
Phase 1, 41 Man Yue St.,
Hung Hom, Kowloon,
Hong Kong
is in conformity with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received,
including interference that may cause undesired
operation.
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio / TV
technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact
for support or sales. Please visit our website at www2.
oregonscientific.com/service for all enquiries.
We
Name:
Address:
Telephone No.:
Oregon Scientific, Inc.
19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA
1-800-853-8883
declare that the product
Product No.:
BAR339DP / BAR339DPA /
BAR339DPU / BAA339DPH
Product Name:
Weather Day & Night
10
BAR339DP_M_EN_R6.indd 10
6/18/08 12:31:30 PM