PoE Injector
POI-2002
H/W Version: 1
The POI-2002 is a Power over Ethernet Injector with
one Ethernet Input (data only) port and one Output
(data + power) port that is designed for small or
medium network environments. This product can
convert standard 100~240V/AC power into lowvoltage DC that runs over existing LAN cable to power
up IEEE 802.3af compliant network accessories. It
also features PoE awareness to verify whether the
network device receiving power or only the data
1
2
3
4
1. PoE LED Indicators
2. RJ-45 Output Port
3. RJ-45 Input Port
4. Interlocking Feature
Key Features
- Minimize the need for a bulky power adapter and
power line
- Delivering power and data to equipment via a single
Ethernet cable
- Internal power supply
- High safety with surge protection
- Remote power feeding up to 100 meters
- PnP, Light Weight and compact size
- Unique interlocking feature for easy installation
will be sent through LAN cable. By adding a PoE
Splitter (POS-1002) to existing non-PoE networking
equipment, installing networking products such as
Access Points and IP cameras can easily be performed.
Wireless device deployments are easily located
without the need for power outlets and network
administrators don’t need to use AC power adapters
anymore.
5
6
7
7
5. Panel Mounted Male Connector
6. Interlocking Feature
7. Wall-Mountable
Works Well With
POS-1002
PoE Splitter
POS-1001
Gigabit PoE Splitter
www.level1.com I one world_one brand_one level_
PoE PD/PSE/Repeaters
Technical Specifications
Standards Compliance
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTx
RJ-45 10/100 Mbps
PoE Power Output
Pin Assignment and Polarity: 4/5 (+), 7/8 (-)
Output Power Voltage: 52 VDC Maximal
Power: 15.4 WattsMaximum
Input Power AC Input Voltage: 100~240VAC
Requirements AC Input Current: 0.3A @ 100~240 VAC
AC Frequency: 50~60 Hz
Dimensions (L x W x H)/ Weight
87.9 x 51.3 x 166mm/ 350g
Indicators:
PoE (Orange)
Environmental Conditions
Operating Temperature: 0~45°C
Storage Humidity: Maximum 95%, Non-condensing
Regulatory
RoHS Compliant, CE/FCC
Safety Approvals
EN 60950:2006
Product Diagram
Ethernet Cable (RJ-45)
PoE
Video Phone
(PoE PD)
Camera
(PoE PD)
802.11 Access Point
(PoE PD)
POI-2002
15.4W
Unique interlocking feature
Non-PoE Switch
Order Information
POI-2002: PoE Injector
Package Contents
POI-2002 x 1
Power Cord x 1
Quick Installation Guide x 1
All mentioned brand names are registered trademarks and property of their owners. Technical specifications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
V1.0