advertisement
ELAC InCeiling Loudspeaker IC 1010
Thanks to its round shaped mounting hole, the InCeiling speaker
IC 1010 can be mounted either into walls or into ceilings. Because of its nominal impedance of 8 ohms, the IC 1010 is cascadable and can easily be connected to all kinds of amplifiers. Because of the use of high grade electronic parts only and the use of gold plated binding posts, nearly no service is necessary, even after a long runtime. Connect it and you’ll never need to touch it again.
Technical features:
•
165 mm woven carbon fibre cone woofer with rubber surround
•
25 mm soft dome tweeter, taken from the 60 series (coated silk dome, compact high energy neodymium magnet system with ferrofluid cooling, aluminum bobbin, inner volume damped with felt)
•
Homogeneous directivity pattern, because of coaxial construction
•
High grade toggle switches for adapting treble range (+/- 2 dB) and mid range / bass range (+/- 2 dB)
•
Crossover with self resetting fuse (polyswitch)
•
Mounting frame with 4 fixing devices
Practical features:
•
Tweeter can be tilt towards the listening position
•
High efficiency, high reliability
•
Nominal impedance of 8 ohms (=non-sensitive against long wires, possibility to connect 2 speakers in parallel without risk of overloading amplifier)
•
•
Rear volume should be at least 6 litres
High quality sound source for universal use (leisure sounding), nice sound even without subwoofer, ideal for combination with speakers of 60 series or 120 series.
•
Adaption to different mounting situations and personal gusto by means of toggle switches
•
High grade gold plated binding posts
•
Solid grille
•
Plastic frame in “Arctic White” may be lacquered individually
•
Comes with paint mask, gasket and special hook for dismantling the grille
Technical data:
Dimensions: diameter depth
199 / 232
94 / 98 / 107
Weight
Principle
Gross mounting volume
Woofer
Tweeter
Crossover frequency
Nominal power handling
Peak power handling
Frequency range (n. IEC 268-5)
Sensitivity
Suitable for amplifiers from … to
Nominal impedance
Minimum impedance
Recommended amplifier power appr. 2
2-…, open
≥ 6
1x 165
1x 25
3000
50
70
35 - 25 000
88
4 - 8
8
7.3 / 200 (5.3 / 16000)
20 - 120
[mm]
(mounting hole / outer-Ø with flange)
(without / with binding posts
/ with frame and grille)
[kg] ways
[l]
[mm] Ø cone
[mm] Ø dome, coaxial construction
[Hz]
[W]
[W]
[Hz]
[dB/2.83V/m]
[Ω]
[Ω]
[Ω / Hz]
[W / channel]
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement