advertisement
Data Sheet Fujitsu PRIMERGY BX924 S2 Dual Socket Server Blade
Data Sheet
Fujitsu PRIMERGY BX924 S2 Dual Socket Server
Blade
Server blade with virtualization fitness at all levels, be it compute power or I/O throughput
The PRIMERGY BX Blade Servers are the ideal choice for data center solutions of today and tomorrow. Our blade servers provide maximum performance and maximum redundancy, but with only minimum space requirements, low power consumption and a reduction in the time and effort required for cabling. The PRIMERGY BX system family is designed to share components between chassis in order to react quickly and easily to changing business requirements. Storage and server blades can be added without any extra effort, as would be needed when cabling or adding management software. You can use the same applications, rely on the same server and storage components and establish connections to the same networks. The PRIMERGY BX Blade
Servers are flexible and have complete control via a central administration instance that is redundant in design; they minimize administrative time and effort, freeing you of time-consuming administration tasks. Our build-to-order process ensures that only completely installed and previously tested solutions are supplied, which have been precisely adapted to individual requirements and which will grow with future business requirements.
PRIMERGY BX924 S2
The PRIMERGY BX924 S2 server blade is operated by two CPUs of the Intel® Xeon® processor 5500 and 5600 series, each with up to 6 cores. Chipset and CPU provide comprehensive, hardware based virtualization support, being supplemented by additional functions of the dual port 10 Gigabit
Ethernet controller Intel® 82599, integrated on motherboard. Up to 18 DIMM modules in the system allow for a scalability that was never before possible, playing into the hands of consolidation demands in the datacenter. A large amount of applications may be controlled by Hypervisor based solutions from VMware, Microsoft, RedHat,
Suse or Citrix.
Although servers are being booted more and more via network, be it with iSCSI protocols and
Ethernet, or SAN topologies and Fibre Channel, this system is enabled for local boot, too. This may optionally be realized by use of solid state drives that combine outstanding performance and high reliability.
For VMware ESXi the boot procedure may also be done using a USB connected Flash Module.
The efficient administration of the entire system via ServerView is supported by the integrated
Remote Management Controller (iRMC S2); the hardware monitoring and setting options can thus be optimally visualized in order to use all options at the highest energy-efficiency levels.
Page 1 / 7 http://ts.fujitsu.com/Primergy
Data Sheet Fujitsu PRIMERGY BX924 S2 Dual Socket Server Blade
Features and Benefits
Main Features
Boosting application power
Single-wide, half-high Server Blade, predestined for use as high performing application server.
The Power Blade for Virtual Machines provides 18 slots for memory and abandons the use of magnetic disk drives.
Core technology for high performance
Next generation Intel® platform architecture realized: Intel®
QuickPath for Westmere’s integrated memory controllers (highspeed connections between microprocessors and external memory, and between microprocessors and the I/O hub).
Power consumption under control
Next generation Intel® microarchitecture with Quad- and Six-Core
CPUs of the Intel® Xeon® processor 5600 series (Westmere), based on the 32-nanometer silicon technology; includes different versions from LV up to high performance models; enabled to execute four instructions per clock cycle, simultaneous multi-threading (SMT) with 2 threads per core, up to 12 MB fully inclusive, fully shared L3 cache.
Extended Page Table (EPT) included.
Hassle-free manageability
Management with integrated Remote Management Controller
(iRMC S2).
I/O in line with demand
IO components: dual-channel 10 Gb Ethernet on board, 2 slots for optional mezzanine cards (quad-channel 1 Gb Ethernet, dualchannel 10 Gb Ethernet, dual-channel 8 Gb Fibre Channel, dualchannel 10 Gb CNA (FCoE), dual-channel 40 Gb Infiniband)
Benefits
High performance with up to 12 processor cores for a wide variety of data center applications.
Requirements for remote boot and maximum available memory capacity are perfectly fulfilled hereby, thus mainly virtualized environments may be served best.
Easy boot of OS like a Hypervisor (e. g. VMware) via USB connected
Flash Module.
Best-in-class performance, bandwidth, and reliability, through integrated memory controllers and a high-speed interconnect for connecting processors and other components; enables systems to fully unleash the new levels of performance that new and more powerful next generation microarchitecture-based processor cores deliver.
More performance in the same power and thermal envelope.
Outstanding energy efficiency and performance on demand through dynamic management of cores, threads, cache, interfaces, and power at runtime.
Improved virtualization performance due to better collaboration between guest and host OS.
Server access and extensive control, even at remote locations.
Routine tasks and maintenance measures in the event of server problems can be conducted remotely and efficiently, thus avoiding the need for time-consuming and cost-intensive call-outs. Use of shared or dedicated Service LAN depending on customers’ demands.
High IO capacity of the Blade Server system itself allows for use of a large number of diverse Server Blade internal IO components in parallel
Page 2 / 7 http://ts.fujitsu.com/Primergy
Data Sheet Fujitsu PRIMERGY BX924 S2 Dual Socket Server Blade
Technical details
Mainboard
Mainboard type
Chipset
Processor quantity and type
Processor
Processor notes
Memory slots
Memory slot type
Memory capacity (min. - max.)
D 2952
Intel® 5500
2 x Intel® Xeon® processor E5500 series / Intel® Xeon® processor E5600 series / Intel® Xeon® processor L5600 series /
Intel® Xeon® processor X5600 series
Intel® Xeon® processor E5503
(2C/2T, 2.00 GHz, SLC: 4 x 256 KB, TLC: 4 MB, Turbo: No, 4.8 GT/s, Mem bus: 800 MHz, 80 W)
Intel® Xeon® processor E5603
(4C/4T, 1.60 GHz, SLC: -, TLC: 4 MB, Turbo: No, 4.8 GT/s, Mem bus: 1066 MHz, 80 W)
Intel® Xeon® processor E5606
(4C/4T, 2.13 GHz, SLC: -, TLC: 8 MB, Turbo: No, 4.8 GT/s, Mem bus: 1066 MHz, 80 W)
Intel® Xeon® processor E5607
(4C/4T, 2.26 GHz, SLC: -, TLC: 8 MB, Turbo: No, 4.8 GT/s, Mem bus: 1066 MHz, 80 W)
Intel® Xeon® processor E5620
(4C/8T, 2.40 GHz, SLC: 4 x 256 KB, TLC: 12 MB, Turbo: 1/1/2/2, 5.86 GT/s, Mem bus: 1066 MHz, 80 W)
Intel® Xeon® processor E5640
(4C/8T, 2.66 GHz, SLC: 4 x 256 KB, TLC: 12 MB, Turbo: 1/1/2/2, 5.86 GT/s, Mem bus: 1066 MHz, 80 W)
Intel® Xeon® processor E5645
(6C/12T, 2.40 GHz, SLC: -, TLC: 12 MB, Turbo: 1/1/1/1/2/2, 5.86 GT/s, Mem bus: 1333 MHz, 80 W)
Intel® Xeon® processor E5649
(6C/12T, 2.53 GHz, SLC: -, TLC: 12 MB, Turbo: 1/1/1/1/2/2, 5.86 GT/s, Mem bus: 1333 MHz, 80 W)
Intel® Xeon® processor L5630
(4C/8T, 2.13 GHz, SLC: 4 x 256 KB, TLC: 12 MB, Turbo: 1/1/2/2, 5.86 GT/s, Mem bus: 1066 MHz, 40 W)
Intel® Xeon® processor L5640
(6C/12T, 2.26 GHz, SLC: 4 x 256 KB, TLC: 12 MB, Turbo: 2/2/3/3/4/4, 6.4 GT/s, Mem bus: 1333 MHz, 60 W)
Intel® Xeon® processor X5647
(4C/8T, 2.93 GHz, SLC: -, TLC: 12 MB, Turbo: 1/1/2/2, 5.86 GT/s, Mem bus: 1066 MHz, 130 W)
Intel® Xeon® processor X5650
(6C/12T, 2.66 GHz, SLC: 4 x 256 KB, TLC: 12 MB, Turbo: 2/2/2/2/3/3, 6.4 GT/s, Mem bus: 1333 MHz, 95 W)
Intel® Xeon® processor X5660
(6C/12T, 2.80 GHz, SLC: 4 x 256 KB, TLC: 12 MB, Turbo: 2/2/2/2/3/3, 6.4 GT/s, Mem bus: 1333 MHz, 95 W)
Intel® Xeon® processor X5667
(4C/8T, 3.06 GHz, SLC: 4 x 256 KB, TLC: 12 MB, Turbo: 2/2/3/3, 6.4 GT/s, Mem bus: 1333 MHz, 95 W)
Intel® Xeon® processor X5672
(4C/8T, 3.20 GHz, SLC: -, TLC: 12 MB, Turbo: 2/2/3/3, 6.4 GT/s, Mem bus: 1333 MHz, 95 W)
Intel® Xeon® processor X5675
(6C/12T, 3.06 GHz, SLC: -, TLC: 12 MB, Turbo: 2/2/2/2/3/3, 6.4 GT/s, Mem bus: 1333 MHz, 95 W)
Intel® Xeon® processor X5677
(4C/8T, 3.46 GHz, SLC: 4 x 256 KB, TLC: 12 MB, Turbo: 1/1/2/2, 6.4 GT/s, Mem bus: 1333 MHz, 130 W)
Intel® Xeon® processor X5687
(4C/8T, 3.60 GHz, SLC: -, TLC: 12 MB, Turbo: 1/1/2/2, 6.4 GT/s, Mem bus: 1333 MHz, 130 W)
Intel® Xeon® processor X5690
(6C/12T, 3.46 GHz, SLC: -, TLC: 12 MB, Turbo: 1/1/1/1/2/2, 6.4 GT/s, Mem bus: 1333 MHz, 130 W)
CPUs with 130W TDP not operable in combination with SSDs. #Inlet temperatures higher than 30° C plus operation of
CPUs with 130 W TDP or of CPUs with 95 W TDP and SSDs may lead to reduced system performance.
18 (3 channels per CPU with 3 slots each)
DIMM (DDR3)
2 GB - 288 GB
Page 3 / 7 http://ts.fujitsu.com/Primergy
Data Sheet Fujitsu PRIMERGY BX924 S2 Dual Socket Server Blade
Memory protection
Memory Modules Independent Mode 2 GB (1 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3 LV, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (1 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
16 GB (1 module(s) 16 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
Memory Modules Mirrored Mode
Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Memory Mirroring support
Hot-spare memory support
4 GB (2 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
32 GB (2 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
Memory Modules Spare or Performance
Mode
6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
12 GB (3 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
48 GB (3 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
Memory modules notes Currently available 16 GB DIMMs are quad ranked and maybe installed up to 12 times; upcoming dual ranked 16 GB
DIMMs maybe installed 18 times and allow for maximum capacity.
Interfaces
USB ports
Graphics (15-pin)
Serial connection
LAN / Ethernet (RJ-45)
Service LAN (RJ45)
I/O controller on board
RAID Controller
SATA Controller
LAN Controller
Remote Management Controller
Trusted Platform Module (TPM)
4 x USB at the front via special cable
1 x VGA at the front via special cable
1 x RS232 (9-pin) at the front via special cable
2 x 10 Gbit Ethernet via Midplane to Ethernet Connection Blade
Service LAN traffic can be switched to shared onboard Gbit LAN port
RAID 0/1 for internal drives
ICH10R
1 x Intel® 82599, 2 x 10 Gbit/s Ethernet, Intel® VT-c (includes I/OAT, VMDq, VMDc = PCI-SIG SR-IOV)
Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller)
Infineon / 1.2 (option)
Slots
PCI-Express 2.0 x8
Drive bays
Hard disk bays
Operating panel
Operating buttons
2 x BX900 Mezzanine Card
2 x 2.5-inch non hot-plug SATA SSD
Status LEDs
On/off switch
ID button
Power (amber / green)
System status (orange)
LAN connection (green)
Identification (blue)
CSS (yellow)
Page 4 / 7 http://ts.fujitsu.com/Primergy
Data Sheet Fujitsu PRIMERGY BX924 S2 Dual Socket Server Blade
BIOS
BIOS features Local and remote update via ServerView Update Manager
Online update tools for main Windows and Linux versions
SMBIOS V2.6
Remote PXE boot support
Remote iSCSI boot support
Operating Systems and Virtualization Software
Certified or supported operating systems and virtualization software
Microsoft® Microsoft® Hyper-V™ Server 2008 R2
Microsoft® Windows Server® 2008 R2 Datacenter
Microsoft® Windows Server® 2008 R2 Enterprise
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows HPC Server® 2008 R2 Suite
Microsoft® Windows® Small Business Server 2011 Premium Add-On
Microsoft® Windows® Small Business Server Standard 2011
Microsoft® Windows® Server 2008 Datacenter
Microsoft® Windows® Server 2008 Enterprise
Microsoft® Windows® Server 2008 Standard
Microsoft® Windows Server® 2003 Enterprise Edition
Microsoft® Windows Server® 2003 Standard Edition
VMware vSphere™ 4.1
Operating system release link
Operating system notes
VMware vSphere™ 4.1 Embedded
VMware vSphere™ 4.1 Installable
VMware vSphere™ 4.0
VMware vSphere™ 4.0 Embedded
VMware vSphere™ 4.0 Installable
Novell® SUSE Linux Enterprise Server 11
Novell® SUSE Linux Enterprise Server 10
Novell® SUSE Linux Enterprise Server 10 with XEN
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 5
Red Hat® Enterprise Linux 5 with XEN
Citrix® XenServer® http://docs.ts.fujitsu.com/dl.aspx?id=a9e600b9-e4cb-4f48-aa41-632f69058421
Support of other Linux derivatives on demand
Server Management
Standard
Option
ASR&R Automatic Server Recovery and Restart
PDA Prefailure Detection and Anaylsis
ServerView Suite:
SV Installation Manager
SV Operation Manager
SV RAID Manager
SV Update Management
SV Power Management
SV Agents iRMC S2 Advanced Pack
Online update packages for BIOS, firmware drivers and ServerView Agents
ServerView Integration solutions for Microsoft SMS, MOM, SCOM, SCCM and Altiris
Deployment Solution ServerView Deployment Manager (fully functional 30-day trial version)
ServerView VIOM - Virtual IO Manager
ServerView Remote Management
ServerView Integration for Tivoli TEC®, Tivoli NetView, HP NNM and HP Operations Manager
Regarding Operating System dependencies for ServerView Suite Software Products see dedicated Product Data sheets.
Server Management notes
Dimensions / Weight
Dimensions (W x D x H) 45 x 500 x 210 mm
Page 5 / 7 http://ts.fujitsu.com/Primergy
Data Sheet Fujitsu PRIMERGY BX924 S2 Dual Socket Server Blade
Dimensions / Weight
Weight
Weight notes
Environmental
Temperature note
Operating environment
Operating environment Link
Electrical values
Compliance
Germany
Europe
Global
Compliance notes
Compliance link
5,75 kg
Actual weight may vary depending on configuration
In accordance with the corresponding PRIMERGY BX900 System Unit
FTS 04230 Guideline for Data Center (installation locations) http://docs.ts.fujitsu.com/dl.aspx?id=e4813edf-4a27-461a-8184-983092c12dbe
GS
CE Class A *
CB
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
In combination with corresponding PRIMERGY BX system unit
There is general compliance with the safety requirements of all European countries and North America. National approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
* Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
https://sp.ts.fujitsu.com/sites/certificates/default.aspx
Components
Storage disks SSD SATA, 3 Gb/s, 64 GB, SLC, non-hot-plug, 2.5-inch, enterprise
SSD SATA, 3 Gb/s, 32 GB, SLC, non-hot-plug, 2.5-inch, enterprise
Hard disk notes
Mezzanine Cards
One Gigabyte equals one billion bytes, when referring to hard disk drive capacity.
Ethernet Mezzanine Card 4 x 1 Gb Fujitsu , PCIe x4
CNA Mezzanine Card 2 x 10 Gb Emulex (MC-CNA102E), PCIe Gen2 x8
Ethernet Mezzanine Card 2 x 10 Gb Fujitsu , PCIe Gen2 x8
Fibre Channel Mezzanine Card 2 x 8 Gb Emulex (MC-FC82E), PCIe x4
InfiniBand CX2 Mezzanine Card 2 x 40 Gb Mellanox , PCIe x8
SAS HBA Mezzanine Card x 6 Gb Fujitsu (),
SAS RAID Mezzanine Card x 6 Gb Fujitsu (),
Warranty
Standard Warranty 3 years
Service level (depending on country)
Maintenance and Support Services - the perfect extension
Recommended Service
Spare Parts availability
Service Weblink
7x24, Onsite Response Time: 4h - For locations outside of EMEA please contact your local Fujitsu partner.
5 years http://ts.fujitsu.com/Supportservice
Page 6 / 7 http://ts.fujitsu.com/Primergy
Data Sheet Fujitsu PRIMERGY BX924 S2 Dual Socket Server Blade
More information
Fujitsu platform solutions
In addition to Fujitsu PRIMERGY BX924 S2,
Fujitsu provides a range of platform solutions.
They combine reliable Fujitsu products with the best in services, know-how and worldwide partnerships.
Dynamic Infrastructures
With the Fujitsu Dynamic Infrastructures approach, Fujitsu offers a full portfolio of IT products, solutions and services, ranging from clients to datacenter solutions, Managed
Infrastructure and Infrastructure as-a-
Service. How much you benefit from Fujitsu technologies and services depends on the level of cooperation you choose. This takes IT flexibility and efficiency to the next level.
Computing Products www.fujitsu.com/global/services/computing/
Software www.fujitsu.com/software/
More information
Learn more about Fujitsu PRIMERGY BX924
S2, please contact your Fujitsu sales representative or Fujitsu Business partner, or visit our website.
http://ts.fujitsu.com/Primergy
Fujitsu green policy innovation
Fujitsu Green Policy Innovation is our worldwide project for reducing burdens on the environment.
Using our global know-how, we aim to resolve issues of environmental energy efficiency through IT.
Please find further information at http://www.
fujitsu.com/global/about/environment/
Copyrights
All rights reserved, including intellectual property rights. Changes to technical data reserved. Delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner.
For further information see http://ts.fujitsu.
com/terms_of_use.html
Copyright © Fujitsu Technology Solutions
Disclaimer
Technical data are subject to modification and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner
Contact
FUJITSU LIMITED
Website: www.fujitsu.com
2011-08-03 CE-EN
Page 7 / 7
All rights reserved, including intellectual property rights. Changes to technical data reserved. Delivery subject to availability.
Any liability that the data and illustrations are complete, actual or correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner.
For further information see http://ts.fujitsu.com/terms_of_use.html
Copyright © Fujitsu Technology Solutions http://ts.fujitsu.com/Primergy
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project