HP ProLiant ML110 G6 + 1GB RAM + 250GB HDD

QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Overview
Front View:
1.
DVD-ROM Drive
2.
Power LED
3.
Drive Activity LED
4.
Front Bezel
5.
SAS Cable (SAS model only)
6.
CPU Heatsink
7.
Hard Drive Controller Card (Optional)
8.
System Fan
9.
System Board
10. 300W Power Supply
Rear View:
1.
Kensington lock notch
2.
Cable lock provision notch
3.
Access panel thumbscrew
4.
Expansion slot cover retainer thumb screw
5.
Expansion slot cover
6.
Expansion slot 1
7.
Expansion slot 2
8.. Expansion slot 3
9.
Expansion slot 4
10. Management NIC port (RJ-45)
11. Video port
12. Serial port
13. USB ports
14. Embedded NIC port (RJ-45)
15. PS/2 keyboard port
16. PS/2 mouse port
17. Power supply cable socket
What's New
Support for Intel® i3-550 FIO Processor Kit and Intel® Xeon® X3470 FIO Processor Kit
Support for 2TB non hot-plug SATA drive
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 1
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processor
Quad-Core Processors
One of the following
Intel® Xeon® X3470 (2.93GHz/4-core/8MB/95W, 1333, HT, Turbo 1/1/4/5) Processor
depending on Model
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® X3460 (2.80GHz/4-core/8MB/95W, 1333, HT, Turbo 1/1/4/5) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® X3450 (2.66GHz/4-core/8MB/95W, 1333, HT, Turbo 1/1/4/4) Processor
Intel® Xeon® X3440 (2.53GHz/4-core/8MB/95W, 1333, HT, Turbo 1/1/2/3) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® X3430 (2.40GHz/4-core/8MB/95W, 1333, Turbo 1/1/2/3) Processor
Dual-Core Processors
Intel® Core™ i3-550 (3.20GHz/2-core/4MB/73W, 1333, HT) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Core™ i3-540 (3.06GHz/2-core/4MB/73W, 1333, HT) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Core™ i3-530 (2.93GHz/2-core/4MB/73W, 1333, HT) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Pentium® G6950 (2.80GHz/2-core/3MB/73W, 1066) Processor
Intel® Celeron® G1101 (2.26GHz/2-core/2MB/73W, 1066) Processor
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost
Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
Cache Memory
One of the following
depending on Model
Integrated 8MB Intel® Smart Cache (Xeon 3400 series)
Integrated 4MB Intel® Smart Cache (Core i3 series)
Integrated 3MB Intel® Smart Cache (Pentium G6950)
Integrated 2MB Intel® Smart Cache (Celeron G1101)
Chipset
Intel® 3420 chipset
NOTE: For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 2
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Standard Features
Memory Protection
ECC
Memory
Type
DIMM Slots
Standard
Maximum
Network Controller
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Expansion Slots #
1
PC3-10600E unbuffered DDR3 ECC up to 1333MHz
Total 4 DIMM slots
2GB (1x2GB) or 4GB (2x2GB)
16GB
Technology Bus Width***
Width
PCIe
X1
Connector
Width
X4
Bus Number*
Number
16
Device
Number**
Number
0
Form Factor
Notes
Full height, Gen.1, NHP
half length
slot
2
PCI
32 bit
N/A
48
0
Full height & 33MHz/3.3V,
Full-length
NHP
slot
3
PCIe
X4
X8
32
0
Full height & Gen.1, NHP
Full-length
slot
4
PCIe
X16
X16
1
0
Full height & Gen.2, NHP
Full-length
slot
*Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the
lowest bus).
*** Indicates the number of physical electrical lanes running to a PCI-e connector.
Storage Controller
HP Embedded Smart Array B110i SATA RAID Controller (RAID 0/1/10)
NOTE: Supports up to four (4) 3.0Gb/s SATA hard disk drives only
NOTE: For set up instructions, please refer to the HP ProLiant ML100 series server user guide at:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01708878/c01708878.pdf
NOTE: For general information about HP Smart Array B110i SATA RAID Controller, please go to:
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/smartarrayb110i/
index.html
Internal Storage Devices
Optical Drive
Hard Drives
One of the following
depending on Model
DA - 13477
HP Half-Height SATA DVD-ROM Optical Drive ships standard
1x160 GB NHP SATA 7200 rpm Drive (Entry Model)
1x250 GB NHP SATA 7200 rpm Drive (Base Model)
2x250 GB NHP SATA 7200 rpm Drive (Performance Model)
Worldwide — Version 21 — July 8, 2011
Page 3
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Standard Features
Maximum Internal
Storage
One of the following
depending on Model
Non-Hot Plug SAS
2.4TB (4 x 600GB) 3.5" SAS
Non-Hot Plug SATA
8.0TB (4 x 2TB) 3.5" SATA
Interfaces
Parallel
Serial
Pointing Device (Mouse,
PS2)
Graphics
Keyboard (PS2)
0
1
1
1
1
USB 2.0 Ports
8 total (4 rear, 2 front panel, 2 internal (one for USB Tape connectivity))
NOTE: 1 Dedicated USB port available for internal USB tape connectivity
NOTE: Please see the following URL for additional information regarding USB support
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html
Network RJ-45 (Ethernet) 1(10/100/1000 bits/s)
Remote Management
HP Lights-Out 100i
Industry Standard
Compliance
ACPI V3.0a Compliant
PCI 2.3 Compliant
PXE Support
WOL Support
IPMI 2.0 compliance
DCMI 1.0
Microsoft® Logo certifications
Red Hat Enterprise Linux Logo certifications
SUSE Linux Enterprise Server Logo certifications
USB 2.0
Server Power Cords
6' country specific, lowline NEMA power cord.
Power Supply
300 Watts Non-Hot Plug, Non redundant Power Supply
System Fans
One (1) - Non-redundant system fan ships standard
One (1) - Non-redundant CPU heatsink fan ships standard
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 4
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Standard Features
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/supportos and our driver download page
http://www.hp.com/support/ML110G6
Graphics
64MB shared supporting all display resolutions up to 1600 x 1200 16bpp @ 75Hz
NOTE: 8MB is dedicated to video memory.
Form Factor
Micro ATX Tower (4U)
NOTE: Rack mounting available via HP Tower to Rack Conversion Tray, Universal Kit. Please see the
options section in this QuickSpecs.
Embedded Manageability HP LO100i Advanced
HP LO100i Lights-Out 100 with Optional LO100i Advanced Licenses for
Virtual KVM and Virtual Media.
Features:
Embedded IPMI standard reporting
System event log access
Remote Serial console (serial redirection)
Browser, Telnet access
SMASH-CLP compliant
DCMI 1.0 compliant
IPMI 2.0 compliant
Secure Socket Layer Encryption
Secure Shell Encryption
Virtual media (Floppy, CD, DVD, ISO image, USB 2.0) with Advanced
License
Virtual KVM with Advanced License
NOTE: For more information, please refer to the QuickSpecs for the LO100i
found at: www.hp.com/go/lo100
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 5
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Standard Features
Core Infrastructure
Management
HP ProLiant ML110 G6
Easy Set-up CD
The HP ProLiant Easy Set-up CD optimizes single-server setup, providing a
simple way to deploy reliable and consistent server configurations. The HP
ProLiant 100 Series Easy Set-up CD ships standard with the ML110 G6.
It offers essential single-server deployment tools for HP ProLiant 100 series
servers that simplify HP entry server setup, providing a repeatable way to
deploy reliable and consistent single-server configurations. The HP ProLiant
Easy Set-up CD assists with the OS installation process by preparing the
system for installing "off-the-shelf" versions of Windows operating system
software and automatically integrating optimized HP ProLiant server software
drivers and utilities. Users enjoy the following benefits:
An easy-to-use, intuitive graphical interface that prepares your system
for the OS installation process.
Integration of key server software drivers with assisted installation.
Dependency and validity checks to ensure that all supported ProLiant
software can be installed.
NOTE: For the latest information about other related software; please visit
the HP Insight Control Management Software Portfolio at:
http://h18004.www1.hp.com/products/servers/management/ and the HP
ProLiant Easy Set-up CD Web site at: www.hp.com/servers/easysetup
Manageability
HP Integrated Lights-Out 100i with optional LO100i Advanced Licenses for Virtual KVM and Virtual
Media
Embedded Lights Out 100 IPMI 2.0 standard reporting
Standard HP ProLiant ML110 G6 Easy Set-Up CD
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
HP Insight Diagnostics
HP Insight Management Agents and Insight Management Providers for Systems Insight Manager (SIM)
Integration
Security
Power-on password
Setup password
Secure Sockets Layer (SSL)
Secure Shell (SSH)
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 6
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Standard Features
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and repair are available for
one year from date of purchase. Support for software and initial setup is available for 90 days from date
of purchase. Enhancements to warranty services are available through HP Care Pack services or
customized service agreements. Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 1 year parts, 1 year labor, 1-year on-site support with next business
day response. (3-1-1 warranty offered in Brazil only). Warranty repairs may be accomplished through the
use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are
designed for easy replacement. A travel and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve
added complexity. Customers may choose to have HP replace Optional CSR parts at no charge.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 7
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Optional Features
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and/or storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging and custom packaging HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers, as well as, the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
valued customers. If you require "custom" rack configuration, please contact HP's Customer Business
Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator.
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 8
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Service and Support
Service and Support
For increased uptime, productivity and ROI - HP Care Pack packaged services for Servers
These days, you need to get the most out of your server investment - you can't afford not to. When you
buy HP server products and solutions, it's also a good time to think about what levels of service and
support you may need. To help take the worry out of deploying, designing, maintaining, and managing
your environment, we've designed a portfolio of service options that are as: flexible, reliable and scalable
as your server. Unlike server-only vendors, we take a holistic approach to your entire environment,
bridging storage, servers, blades, software and network infrastructures with our HP Care Pack packaged
services for Servers.
Protect your business beyond the warranty
When it comes to robustness and reliability, standard warranties on today's computing equipment have
matured just as the technologies have matured. Good news on some fronts - but also a source of
potential problems and subsequent consequences that come from depending on standard warranties
alone. Standard warranty protects against product defects and some causes of downtime - but not the
business. By using a standard approach to warranty uplifts, such as HP Care Pack Services, you can
reduce downtime risks and be more certain of operational consistency for both mission-critical and
standard business computing. Simply put, HP Care Pack Services normalize the warranty of combined
products - helping you proactively guard against unplanned downtime.
Extending warranties with HP Care Pack Services
For cost-effective upgrading or extending your standard warranty, HP Care Pack Services offer a suite of
standard reactive hardware and software support services that are sold separately, or combined as with
our Support Plus and Support Plus 24 services. The portfolio also provides a combination of proactive
and reactive services, such as Proactive 24 Service and Critical Service. In addition, with HP Proactive
Select we offer an innovative approach to service delivery that gives you the flexibility to acquire the
specific proactive services you need today, then add services as your needs evolve. HP Proactive Select
offers a broad set of technical or per-event type service options - including server, storage, and network,
SAN device, and software, environment, installation and education services. Services that you can mix
and match depending on your specific requirements, from preliminary planning and equipment delivery
to installation, configuration, integration, and testing, through every level of ongoing support. Our HP
Care Pack packaged services for Servers assures help when you need it most. And for many products,
post-warranty HP Care Pack Services are available when your original warranty has expired.
HP Server Services: Offering reliability, flexibility and value - just like your storage
HP Server Services offers a full spectrum of customer care, from technology support to complex
migrations to complete completely managed services. HP Factory Express provides customization,
integration and deployment services for turnkey solutions. HP Education offers flexible, comprehensive
training on server networking and server software to help your IT staff get the most out of your
investments. And HP Financial solutions extend innovative financing and asset management programs to
cost-effective buy, manage and eventually retire your older equipment.
HP Server Services, the trusted business technology experts who manage your technology in action,
because when technology works, business works. http://www.hp.com/services/servers,
http://www.hp.com/services/storage
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using HP order
configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at:
http://www.hp.com/go/lookuptool
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 9
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Service and Support
NOTE: Care Pack Services availability may vary by product and country.
Recommended HP Care Pack Services for optimal satisfaction with your HP product
Recommended Services
3-Year HP Hardware Support Onsite Service, 4-hour response, 13x5
Delivering increased equipment availability and productivity with rapid-response onsite and remote
support for your HP hardware, as well as selected multivendor equipment, this flexible HP Care Pack
Service covers desktops, workstations, servers, storage systems, network equipment, and printing.
Choose 4-Hour Same Business Day Hardware Support when you need to:
Extend your hardware warranty coverage with prompt service for key systems and devices
Obtain easy-to-buy, easy-to-use onsite services
Improve hardware performance and uptime
Increase the return on your HP and multivendor hardware investments
Enjoy consistent service coverage across geographically dispersed sites
Optional Defective Media Retention Service
Service feature highlights
Help improve or maintain system uptime
Convenient onsite support
Committed response time
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
3-Year HP Hardware Support Onsite Service, Next-day response (9x5)
HP ProLiant services: Our integrated service portfolio covers the entire solution lifecycle for x86 server
environments - from installation and support through the design, deployment, and management of
complex IT environments - so that you can confidently address any IT and business need.
HP Hardware Support Onsite Service provides high-quality remote assistance and onsite support for your
covered hardware, helping you to improve product time.
Service feature highlights
Help improve or maintain system uptime
Convenient onsite support
Reliable response time
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
HP ProLiant Server Hardware Installation
HP Installation Service provides for the basic installation of HP branded servers, workstations, desktop
systems, notebook PCs, thin clients, storage devices, printers, networking, and software products. The
Installation Service is part of a suite of HP deployment services that are designed to give you the peace
of mind that comes from knowing your HP and HP-supported products have been installed by an HP
specialist in accordance with the manufacturer's product documentation.
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 10
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Service and Support
Expedited installation, with all service prerequisites met before the installation is performed
Installation in accordance with manufacturer's specifications, enhancing the supportability of your
HP-installed hardware and software
Service delivery at a mutually scheduled time
Allows your IT resources to stay focused on their core tasks and priorities
Availability of an HP service specialist to answer questions during the onsite delivery of this service
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
Optional HP Care Pack Services that will enhance your HP product experience
Optional Services
3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
As an alternative to our recommended support level, for customers who need same day response server
level 24x7.
Provides high-quality remote assistance and onsite support for your covered hardware, helping you to
improve product uptime.
Service benefits:
Help improved system uptime
Convenient onsite support
Reliable response time
Remote problem diagnosis and support
Onsite hardware support
Materials included
Service-level options with different coverage windows and response times
Work to completion
Escalation management
Access to electronic support information and services
HP electronic remote monitoring and support solution (for eligible products only)
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service - 24-hour CTR
As an alternative to our recommended support level, for customers who need committed call-to-repair
for server hardware.
HP Hardware Support Onsite 24x7 24-Hour Call-to-Repair Service provides your IT manager access to
a team of support specialists. They will quickly begin troubleshooting the system to help return the
hardware to operating condition within a maximum of 24 hours from the initial service request.
HP is committed to repairing your hardware within a maximum of six hours. The benefits include:
Improved system uptime
Predictable repair times
More effective IT resource planning
Consistent level of hardware support across your multi-technology systems
Optional defective media retention service
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 11
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Service and Support
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EN.pdf
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service - 6-hour CTR
As an alternative to our recommended support level, for customers who need committed call-to-repair
for server hardware.
HP Hardware Support Onsite 24x7 6-Hour Call-to-Repair Service provides your IT manager access to a
team of support specialists. They will quickly begin troubleshooting the system to help return the
hardware to operating condition within a maximum of six hours from the initial service request.
HP is committed to repairing your hardware within a maximum of six hours. The benefits include:
Improved system uptime
Predictable repair times
More effective IT resource planning
Consistent level of hardware support across your multi-technology systems
Optional defective media retention service
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EN.pdf
eSupport
HP eSupport is a portfolio of technology-based services that assist you with managing your business
environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you need to
manage the daily operations of your IT environment.
Features include:
include
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access the support
portal, visit: http://www.hp.com/support
HP Insight Remote Support software delivers secure remote support for your HP Servers and Storage, 24
X 7, so you can spend less time solving problems and more time focused on your business. You can
have your systems remotely monitored for hardware failure using secure technology that's been proven at
thousands of companies around the world. In many cases, you can avoid problems before they occur.
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 12
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Service and Support
Customer Technical
Training
HP Services continues to be recognized for service and support excellence by customers, partners,
industry organizations and publications around the world. Recent honors and award reflect our services
team's dedications, technical expertise, professionalism and uncompromising commitment to customer
satisfaction. For a list of all our awards, please visit:
http://h20219.www2.hp.com/services/cache/433028-0-0-225-121.htm
HP Services Awards
HP Services continues to be recognized for service and support excellence by customers, partners,
industry organizations and publications around the world. Recent honors and award reflect our services
team's dedications, technical expertise, professionalism and uncompromising commitment to customer
satisfaction. For a list of all our awards, please visit:
http://h20219.www2.hp.com/services/cache/433028-0-0-225-121.htm
Additional Services
Information
For more information about HP Care Pack Services for Servers, please visit:
http://www.hp.com/services/servers
To learn more on HP ProLiant servers and HP BladeSystem, please contact your HP sales representative
or HP Authorized Channel Partner, or visit: www.hp.com/services/proliant or
www.hp.com/services/bladesystem.
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 13
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Pre-configured Models
SATA Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options
section of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be
shipped separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
NOTE: HP NHP Internal SAS/SATA 4 port cable kit (487734-B21) is required when Smart Array Controller is ordered with a BTO
configuration
NOTE: For general information about HP Smart Array B110i SATA RAID Controller, please visit:
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/smartarrayb110i/index.html
(1) Intel® Pentium® processor G6950 (2.80GHz, 73W, 3MB, 1066)
Entry Model
Processor
3MB Intel® Smart Cache
Cache Memory
HP ProLiant ML110 G6
2GB (1x2GB) PC3-10600E DDR3 UB ECC
Memory
G6950 1P 2GB-U NonNOTE: Total 4 DIMM slots.
hot Plug 160GB SATA
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Network Controller
LFF 300W PS Server
506666-xx1
HP Embedded Smart Array B110i SATA RAID Controller (RAID 0/1/10)
Storage Controller
(4 ports for HDD)
1 x 160GB Non-hot-plug LFF SATA
Hard Drive
8.0TB (4 x 2.0TB) Non-hot plug LFF SATA (Maximum)
Internal Storage
HP Half-Height 16x SATA DVD-ROM
Optical Drive
300W Non-Hot Plug, Non-Redundant Power Supply
Power Supply
One (1) - Non-redundant system fan ships standard
Fans
One (1) - Non-redundant CPU heatsink fan ships standard
Integrated HP ProLiant 100 G6 Lights Out 100i Remote Management
Management
Micro ATX Tower (4U)
Form Factor
Server Warranty includes 1 year parts, 1 year labor, 1-year on-site support
Warranty
with next business day response. (3-1-1 warranty offered in Brazil only).
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 14
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Pre-configured Models
Base Model
Processor
HP ProLiant ML110 G6
X3430 1P 2GB-U Nonhot Plug 250GB SATA
LFF 300W PS Base Svr
506667-xx1
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Fans
Management
Form Factor
Warranty
Performance model
Processor
HP ProLiant ML110 G6
X3450 1P 4GB-U Nonhot Plug 500GB SATA
LFF 300W PS Server
506668-xx1
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Fans
Management
Form Factor
Warranty
DA - 13477
(1) Intel® Xeon® processor X3430 (2.40GHz, 95W, 8MB, 1333, Turbo
1/1/2/3)
8MB Intel® Smart Cache
2GB (1x2GB) PC3-10600E DDR3 UB ECC
NOTE: Total 4 DIMM slots.
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
HP Embedded Smart Array B110i SATA RAID Controller (RAID 0/1/10)
(4 ports for HDD)
1 x 250GB Non-hot-plug LFF SATA
8.0TB (4 x 2.0TB) Non-hot plug LFF SATA (Maximum)
HP Half-Height 16x SATA DVD-ROM
300W Non-Hot Plug, Non-Redundant Power Supply
One (1) - Non-redundant system fan ships standard
One (1) - Non-redundant CPU heatsink fan ships standard
Integrated HP ProLiant 100 G6 Lights Out 100i Remote Management
Micro ATX Tower (4U)
Server Warranty includes 1 year parts, 1 year labor, 1-year on-site support
with next business day response. (3-1-1 warranty offered in Brazil only).
(1) Intel® Xeon® processor X3450 (2.66GHz, 95W, 8MB, 1333, HT, Turbo
1/1/4/4)
8MB Intel® Smart Cache
4GB (2x2GB) PC3-10600E DDR3 UB ECC
NOTE: Total 4 DIMM slots.
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
HP Embedded Smart Array B110i SATA RAID Controller (RAID 0/1/10)
(4 ports for HDD)
2 x 250GB Non-hot-plug LFF SATA
8.0TB (4 x 2.0TB) Non-hot plug LFF SATA (Maximum)
HP Half-Height 16x SATA DVD-ROM
300W Non-Hot Plug, Non-Redundant Power Supply
One (1) - Non-redundant system fan ships standard
One (1) - Non-redundant CPU heatsink fan ships standard
Integrated HP ProLiant 100 G6 Lights Out 100i Remote Management
Micro ATX Tower (4U)
Server Warranty includes 1 year parts, 1 year labor, 1-year on-site support
with next business day response. (3-1-1 warranty offered in Brazil only).
Worldwide — Version 21 — July 8, 2011
Page 15
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Pre-configured Models
Country Code Key
xx=00
xx=01
xx=03
xx=04
xx=05
xx=37
xx=42
xx=AA
NA
Australia
UK
Germany
France
AP
Euro
PRC (Excludes P/N 506666-xx1)
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 16
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Configuration Information-Factory Integrated Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is only available as a factory installable option.
Step 1: Base Configuration
HP Models
HP ProLiant ML110 G6 Configure-to-order Server
Factory Integrated Models ship with:
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Integrated HP ProLiant 100 G6 Lights Out 100i Remote Management
HP Embedded Smart Array B110i SATA RAID Controller (RAID 0/1/10), 4 ports for
HDD
NOTE: For set up instructions for HP Smart Array B110i SATA Controller please refer
to the HP ProLiant ML100 series server user guide at:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01708878/
c01708878.pdf
NOTE: For general information about HP Smart Array B110i SATA RAID Controller,
please visit:
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/
smartarrayb110i/index.html
Non hot-plug SAS/SATA 4 port cable
Easy set up CD
PCA
Power cord
Micro ATX Tower (4U)
510078-B21
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HP Processors
Quad-Core Processor
HP ML110G6 Intel® Xeon® X3470 (2.93GHz/4-core/8MB/95W) FIO Processor Kit
HP ML110 G6 Intel® Xeon® X3460 (2.80GHz/4-core/8MB/95W) FIO Processor Kit
HP ML110 G6 Intel® Xeon® X3450 (2.66GHz/4-core/8MB/95W) FIO Processor Kit
HP ML110 G6 Intel® Xeon® X3440 (2.53GHz/4-core/8MB/95W) FIO Processor Kit
HP ML110 G6 Intel® Xeon® X3430 (2.40GHz/4-core/8MB/95W) FIO Processor Kit
Dual-Core Processor
HP ML110G6 Intel® Xeon® i3-550 (3.20GHz/2-core/4MB/73W) FIO Processor Kit
HP ML110 G6 Intel® Core™i3-540 (3.06GHz/2-core/4MB/73W) FIO Processor Kit
HP ML110 G6 Intel® Core™i3-530 (2.93GHz/2-core/4MB/73W) FIO Processor Kit
HP ML110 G6 Intel® Pentium® G6950 (2.80GHz/2-core/3MB/73W) FIO Processor
Kit
DA - 13477
Worldwide — Version 21 — July 8, 2011
622187-L21
578348-L21
578347-L21
578346-L21
578345-L21
622185-L21
578352-L21
578351-L21
578350-L21
Page 17
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Configuration Information-Factory Integrated Models
HP ML110 G6 Intel® Celeron G1101 (2.26GHz/2-core/2MB/73W) FIO Processor
Kit
578349-L21
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
500672-B21
HP Optical Drives
HP Half-Height SATA DVD-ROM Optical Drive
HP Half-Height SATA DVD-RW Optical Drive
447326-B21
447328-B21
HP Hard Drives
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard
Drive
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard
Drive
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty
Hard Drive
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard
Drive
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard
Drive
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
NOTE: Support for SAS non-hot plug drives requires HP SAS/Smart Array Controller.
See Step 3 below.
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr
Warranty Hard Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr
Warranty Hard Drive
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr
Warranty Hard Drive
HP Memory
DA - 13477
Worldwide — Version 21 — July 8, 2011
500670-B21
500668-B21
507774-B21
507772-B21
458941-B21
571232-B21
458947-B21
516830-B21
516826-B21
516824-B21
Page 18
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Configuration Information-Factory Integrated Models
HP Storage Controllers
SAS Controller
NOTE: Support for SAS hard drives/tape drive requires selection of a SAS controller.
NOTE: Support for hardware RAID requires selection of a SAS controller.
Smart Array P212 Controller
HP Smart Array P212/256 BBWC 1-ports Int/1-ports Ext PCIe x8 FIO SAS Controller
491191-B21
Step 3: Choose Additional Factory Integratable Options (only one of the following from each
list unless otherwise noted)
HP USB and SD Options HP ProLiant Server Mouse Carbon
HP ProLiant W2K Server Keyboard
AC105A
AC110A
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" sections below.
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 19
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use
of an HP approved configurator. Contact your local sales representative for additional information.
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
500672-B21
HP Memory
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
500670-B21
Memory Kit
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
500668-B21
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
HP Optical Drives
HP Half-Height SATA DVD-ROM Optical Drive
HP Half-Height SATA DVD-RW Optical Drive
HP Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
and firmware) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard
Drive
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard
Drive
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty
Hard Drive
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard
Drive
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard
Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
NOTE: Support for SAS non-hot plug drives requires HP SAS/Smart Array Controller.
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr
Warranty Hard Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr
Warranty Hard Drive
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr
Warranty Hard Drive
DA - 13477
Worldwide — Version 21 — July 8, 2011
447326-B21
447328-B21
507774-B21
507772-B21
458941-B21
571232-B21
458947-B21
516830-B21
516826-B21
516824-B21
Page 20
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Core Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
HP Networking
HP NC112T PCI Express Gigabit Server Adapter
HP NC360T PCI-E Dual Port Gigabit Server Adapter
HP NC373T PCI-E Multifunction Gigabit Server Adapter
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs
DA - 13477
Worldwide — Version 21 — July 8, 2011
503746-B21
412648-B21
394791-B21
458492-B21
Page 21
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use
of an HP approved configurator. Contact your local sales representative for additional information.
HP Lights-Out 100i (LO100i) Advanced including 1yr 24x7 Support Single Server
530521-B21
HP Entry-Level Server
Management
License
NOTE: For additional License Kits please see the Lights-Out 100i QuickSpecs at:
www.hp.com/go/lo100.
HP Security (TPM)
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely
store artifacts used to authenticate the server platform. These artifacts can include
passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption
(BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker
leverages the enhanced security capabilities of a Trusted Platform Module (TPM)
version 1.2. The TPM works with BitLocker to help protect user data and to ensure that
a server running Windows Server 2008 has not been tampered with while the system
was offline.
NOTE: For more information about TPM, please visit: www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
HP Storage Controllers
SAS Controllers
NOTE: Support for SAS hard drives/tape drive requires selection of a SAS controller.
NOTE: Support for hardware RAID requires selection of a SAS controller.
Smart Array P212 Controller
HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS Controller
HP Smart Array P212/256 1-ports Int/1-ports Ext PCIe x8 SAS Controller
Optional Upgrades
HP 256MB P-series Cache Upgrade
HP 650 mAh P-Series Battery
NOTE: Required to enable BBWC on the 256MB cache.
HP Non-Hot Plug Internal SAS/SATA 4 Port Cable Kit
NOTE: This cable will only be required when Smart Array Controller is ordered with a
BTO configuration.
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates
Single Server License
NOTE: This part number can be used to purchase a single license or to order multiple
licenses with a single activation key. Customers will receive a license entitlement
certificate via e-mail. The license entitlement certificate must be redeemed online or
via fax in order to obtain the license activation key(s). Include one year of 24x7 HP
Software Technical Support Services.
DA - 13477
Worldwide — Version 21 — July 8, 2011
488069-B21
462828-B21
462834-B21
462968-B21
462969-B21
487734-B21
516471-B21
Page 22
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Additional Options
NOTE: Please see the following QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13203_div/13203_div.html
(Smart Array P212 Controller)
http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html
(Smart Array Advanced Pack)
SCSI HBA
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
NOTE: Supports SCSI Tapes only, no RAID support.
NOTE: HBA is recommended for SCSI tape drive support.
NOTE: Please see the following QuickSpecs for Technical Specifications and
additional information:
http://h18004.www1.hp.com/products/quickspecs/12566_div/12566_div.html
(SC11Xe HBA)
HP Backup & Recovery
Software
Data Protector Express
HP Data Protector Express V5.0 for 1 Server E-LTU
HP Data Protector Express V5.0 for 3 Servers E-LTU
HP Data Protector Express V5.0 for 10 Servers E-LTU
HP Basic Upgrade to Data Protector Express V5 for 1 Server E-LTU
NOTE: Only one of these Data Protector Express base products is required. To see
available options: http://www.hp.com/go/dataprotectorexpress
HP Tape Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media see:
http://www.hp.com/go/tape. For hardware and software compatibility of HP tape
backup products see: http://www.hp.com/go/connect.
HP StorageWorks DAT 320 USB Internal Tape Drive
HP StorageWorks DAT 320 SAS Internal Tape Drive
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21)
recommended.
HP StorageWorks Ultrium 448 SAS Internal Drive
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21)
recommended.
HP StorageWorks Ultrium 920 SAS Internal Tape Drive
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21)
recommended.
HP StorageWorks 1/8 G2 Ultrium 920 SAS Autoloader
NOTE: Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack
installation. Connection using HP P212 Smart Array Controller SAS (462828-B21)
recommended.
HP StorageWorks MSL2024 Ultrium 920 SAS Tape Library
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21)
recommended.
DA - 13477
Worldwide — Version 21 — July 8, 2011
412911-B21
TC330AAE
TC331AAE
TC332AAE
TC333AAE
AJ825A
AJ830A
DW085A
EH847A
AH558A
AH559A
Page 23
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Additional Options
HP Disk Backup
NOTE: For the complete range of D2D Backup Systems see:
http://www.hp.com/go/d2d. For the complete range of RDX drives and media see:
http://www.hp.com/go/rdx. For hardware and software compatibility of HP disk
backup products see: http://www.hp.com/go/connect.
HP D2D Backup Systems with Backup Data Deduplication
NOTE: These are network connected appliances with connectivity using the iSCSI
protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host
Bus Adapter is recommended.
HP StorageWorks D2D2502i Backup System
NOTE: 1.5TB of usable network disk backup capacity. Network connected appliance
with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI
initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
HP StorageWorks D2D2504i Backup System
NOTE: 3.0TB of usable network disk backup capacity. Network connected appliance
with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI
initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
USB Removable Media RDX Disk Backup Systems
HP StorageWorks RDX320 Internal Removable Disk Backup System
NOTE: 320GB of disk capacity per data cartridge.
HP StorageWorks RDX500 Internal Removable Disk Backup System
NOTE: 500GB of disk capacity per data cartridge.
HP Uninterruptible Power HP Tower UPS
Systems
HP R/T3000 G2 Uninterruptible Power System (UPS)
HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power
System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14058_div/14058_div.html
(Worldwide)
HP R1500 G3 Uninterruptible Power Supply (UPS)
HP R1.5kVA G3 1U NA Uninterruptible Power System
HP R1.5kVA G3 1U JP/TW Uninterruptible Power System
HP R1.5kVA G3 1U INTL Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14059_div/14059_div.html
(Worldwide)
HP T1000 G3 UPS Models
HP T1000 G3 1000VA INTL Tower Uninterruptible Power System
HP T1000 G3 1000VA NA Tower Uninterruptible Power System
HP T1000J JP Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12507_div/12507_div.html
(Worldwide)
DA - 13477
Worldwide — Version 21 — July 8, 2011
EJ001B
EJ002B
AJ767A
AJ934A
AF466A
AF467A
AF468A
AF469A
AF470A
AF471A
AF449A
AF448A
AF457A
Page 24
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Additional Options
HP T750 G2 UPS Models
HP T750 G2 750VA INTL Tower Uninterruptible Power System
HP T750 G2 750VA NA Tower Uninterruptible Power System
HP T750J JP Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13160_div/13160_div.html
(Worldwide)
NOTE: For additional information regarding HP Uninterruptable Power Systems,
please see the following URL: www.hp.com/go/rackandpower (Worldwide)
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com
AF447A
AF446A
AF456A
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link.
That link will list cable descriptions, requirements, and specifications for UPS and PDU
units. Please see the following link: www.hp.com/products/powercords.
HP Rack Series
HP Rack 10000 G2 Series (Graphite Metallic)
HP 10642 G2 Pallet Universal Rack
HP 10642 G2 Shock Universal Rack
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.
NOTE: Please see the Rack 10000 G2 QuickSpecs for Technical Specifications such
as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower (Worldwide)
NOTE: The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks
provide enhanced airflow for maximum cooling, allowing these racks to be fully
loaded with servers using the latest processors.
AF001A
AF002A
CAUTION: If a third-party rack is used, observe the following additional requirements
to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear
doors, you must allow 830 square inches (5,350 sq cm) of hole evenly
distributed from top to bottom to permit adequate airflow (equivalent to the
required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels
of the rack must be a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel Uspaces in the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.
NOTE: HP ProLiant DL rack models have fixed rails which provide support for racks
with round mounting holes and tool-free support for racks with square mounting holes
(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 25
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Additional Options
range of 26" - 36".
NOTE: Support for all 2 and 4 post Telco racks and threaded hole racks requires an
additional option kit from Rack Solutions. The Rack Solutions brackets can be
purchased at: www.hp.com/go/rackandpower.
HP Rack Options
HP KVM Switches
HP Server Console 0x2x8 Port Analog Switch
HP Server Console 0x2x16 Port Analog Switch
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11834_div/11834_div.html
(Worldwide)
HP Server Console Switch G2 with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13475_div/13475_div.html
(Worldwide)
HP IP Console Switch G2 with Virtual Media & CAC
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_div/13474_div.html
(Worldwide)
HP Rack Options
HP Tower to Rack Conversion Tray Universal Kit
HP USB and SD Options HP USB 2-Button Optical Scroll Mouse
HP USB 04 Standard Keyboard
NOTE: For the installation of Windows and other OS's, a floppy drive or the HP USB
Floppy Drive Key may be required to complete driver installation. A standard USB
drive key may not work to complete driver installation.
DA - 13477
Worldwide — Version 21 — July 8, 2011
AF616A
AF617A
AF618A
AF619A
AF620A
AF621A
AF622A
417705-B21
DC172B
DT528A#xxx
Page 26
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Additional Options
HP Care Pack Services
Hardware Services Next Business Day On-Site Service
HP 3 year Next business day ProLiant ML110 Hardware Support
Hardware Services - 4-Hour On-site Service
HP 3 year 4 hour 13x5 ProLiant ML110 Hardware Support
HP 3 year 4 hour 24x7 ProLiant ML110 Hardware Support
Hardware Services 6-Hour Call to Repair On-Site Service
HP 3 year 6 hour 24x7 Call to Repair ProLiant ML110 Hardware Support
Hardware Installation
HP Install ProLiant ML110 Service
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack.
DA - 13477
Worldwide — Version 21 — July 8, 2011
U4433E
U4434E
U4435E
U4436E
U4444E
Page 27
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Memory
HP ProLiant ML110 G6 Models
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
SATA Models:
2GB or 4 GB of PC3-10600E DDR3 UDIMM running up to 1333MHz with memory kits installed.
Standard Memory with Optional Memory
Up to 8GB of memory is available with the installation of standard and optional memory, 4x 2 GB PC3-10600E un-buffered ECC
DDR3 SDRAM DIMM Memory kits.
NOTE: The below chart does not represent all possible memory configurations.
NOTE: For best performance, it is recommended that customer installs memory in identical pairs (Slots 1C and 3D are interleaving
pair. Slots 2A and 4B are interleaving pair).
Memory
Standard (Entry
Model)
Standard (Base
Model)
Standard
(Performance
Model)
Maximum
Slot
2 GB
DIMM1C
Empty
DIMM2A
2 GB
DIMM3D
Empty
DIMM4B
Empty
2 GB
Empty
2 GB
Empty
Empty
4 GB
Empty
2 GB
Empty
2 GB
16 GB
4 GB
4 GB
4 GB
4 GB
Following are memory options available from HP:
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
HP Memory
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
DA - 13477
Worldwide — Version 21 — July 8, 2011
500672-B21
500670-B21
500668-B21
Page 28
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Storage
1.
1st removable media drive
2.
2nd removable media drive
3.
4th SAS/SATA hard drive
4.
3rd SAS/SATA hard drive
5.
2nd SAS/SATA hard drive
6.
1st SAS/SATA hard drive
7.
HDD spare screws
8.
Removable media drive spare screws
Drive Support
Removable Media
DVD Drive
DVD-RW Drive
Quantity
Supported
Position
Supported
2
2
1 or 2
1 or 2
DA - 13477
Controller
Integrated SATA
Integrated SATA
Worldwide — Version 21 — July 8, 2011
Page 29
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Storage
Hard Drives (SATA Models only)
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data
transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
Controller
2TB 3G 7.2K
Up to 4
3,4,5,6
Smart Array B110i SATA RAID Controller (RAID 0/1/10)
1TB 3G 7.2K
NOTE: Hardware RAID support requires purchase of HP Smart
500GB 3G 7.2K
Array P212 Controller.
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
Quantity
Position
Supported
Supported
Controller
250GB 3G 7.2K
Up to 4
3,4,5,6
Smart Array B110i SATA RAID Controller (RAID 0/1/10)
160GB 3G 7.2K
NOTE: Hardware RAID requires purchase of HP Smart Array P212
Controller.
Hard Drives (SAS Models only)
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
NOTE: SAS non-hot plug drives require HP SAS/Smart Array Controller.
Quantity
Position
Supported
Supported
Controller
600GB 6G 15K DP
Up to 4
3,4,5,6
Smart Array P212 Controller
450GB 6G 15K DP
NOTE: Transfer rates of drives are dependent on the maximum
300GB 6G 15K DP
transfer rate supported by the Controller. Refer to the Controller
technical specifications for details.
Maximum Storage Capacity - SATA/SAS Models
SATA
Internal
SAS
8.0TB (4 x 2TB)
2.4TB (4 x 600GB)
Tape and Disk-Based Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media, including the internal fitting models, see:
http://www.hp.com/go/tape. For the complete range of D2D Backup Systems see: http://www.hp.com/go/d2d. For the complete
range of RDX drives and media see: http://www.hp.com/go/rdx. For hardware and software compatibility of HP disk and tape
backup products see: http://www.hp.com/go/connect.
HP SCSI Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
Position
Internal or
External
Recommended Controller
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus
Adapter
DA - 13477
Worldwide — Version 21 — July 8, 2011
Part Number
412911-B21
Page 30
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Storage
HP SCSI Rack Mount Kits
1U Rack-Mount Kit
3U Rack-Mount Kit
HP USB Tape Drives
DAT 40
DAT 72
DAT 160
DAT 320
HP USB Rack Mount Kits
1U USB Rack-Mount Kit
HP SAS Tape Drives
DAT 160
DAT 320
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-4 Ultrium 1760
LTO-4 Ultrium 1840
LTO-5 Ultrium 3000
LTO-5 Ultrium 3280
External
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus
Adapter
412911-B21
Internal or
External
USB 2.0 Port
N/A
External
USB 2.0 Port
N/A
Internal or
External
HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS
Controller
462828-B21
HP SAS Rack Mount Kits
1U Rack-Mount Kit
3U Rack-Mount Kit
External
HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS
Controller
462828-B21
HP SCSI Tape
Autoloaders
DAT 72x10 Autoloader
1/8 G2 Autoloader
External
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus
Adapter
412911-B21
HP SCSI Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
HP StorageWorks U320e SCSI Dual Channel Host Bus Adapter
HP SAS Tape Autoloaders
and Libraries
1/8 G2 Autoloader
MSL2024
MSL4048
MSL8096
External
HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS
Controller
DA - 13477
Worldwide — Version 21 — July 8, 2011
AH627A
462828-B21
Page 31
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Storage
HP Fibre Channel Tape
Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
Please consult the EBS connectivity matrix at:
http://www.hp.com/go/ebs for connectivity information and the
supported Fibre Channel HBAs shown in this QuickSpecs.
HP USB RDX Removable
Disk Backup System
RDX160
RDX320
RDX500
RDX750
Internal or
External
HP D2D Backup Systems,
iSCSI
D2D2500i
D2D4000i
External
Embedded Network Controller. If the server requires a hardware
iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is
recommended.
HP D2D Backup Systems,
Fibre Channel
D2D4000fc
External
Direct server attach is not supported, requires connection via SAN
fabric. See: http://www.hp.com/go/connect
USB 2.0 port
DA - 13477
Worldwide — Version 21 — July 8, 2011
N/A
Page 32
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Power Specifications
300 Watts Non-Hot Plug, Non redundant Power Supply
445067-001
Part Number
100 to 127 and 200 to 240 V auto ranging
Operational Input Voltage Range
(Vrms)
50 to 60 Hz
Frequency Range (Nominal) (Hz)
Nominal Input Voltage (Vrms)
Max Rated Output Wattage Rating
Nominal Input Current (A rms)
Max Rated Input Wattage Rating
(Watts)
Max. Rated VA (Volt-Amp)
Efficiency (%)
Power Factor
Leakage Current (mA)
Maximum Inrush Current (A peak)
Maximum Inrush Current duration (mS)
100
300
5
400
120
300
5
N/A
200
300
2.5
N/A
230
300
2.5
400
240
300
2.5
N/A
400
80%
0.9
3.5mA
N/A
N/A
80%
N/A
N/A
No component
was damaged
and input fuse
shall not blow
N/A
N/A
80%
N/A
N/A
N/A
400
80%
0.9
N/A
No component
was damaged
and input fuse
shall not blow
N/A
N/A
80%
N/A
N/A
N/A
N/A
DA - 13477
N/A
Worldwide — Version 21 — July 8, 2011
N/A
Page 33
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
System Specifications
HP ProLiant ML110 G6 Fully
Configured
Fully Loaded System output Wattage
(W)
Fully Loaded System Input Current (A
rms)
Fully Loaded System Thermal (BTU- Hr)
Fully Loaded System VA (Volt-Amp)
System Leakage with all power supplies
loaded (mA)
System Inrush Current with all power
supplies loaded (A)
Power cord requirements
Power **
(see **)
300W
5A @ 100V, 2.5A @ 200V
1277BTU
400 VA
3.5mA@110V
3.5mA@220V
<150A@240Vac
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
**Power shown is for a fully configured system consisting of (1) CPU, (4) double-sided
DIMMs, (4) HDDs, (1) DVD-ROM, (4) PCI cards, and (1) power supply.
Power Cords (13 Cord Sets)
Country
Taiwan
Japan
India
Brazil
Australia
Euro
PRC
UK
US
ITL
Power Cord Part Number
393312-001
139867-005
397138-002
285052-001
100661-001
100614-009
286496-001
100613-008
121565-001
109197-008
NOTE: To review typical system power ratings use the Active Answers HP Power Advisor which is available via the online tool
located at URL: http://www.hp.com/go/hppoweradvisor
To drill down to calculators:
- Click on: "ProLiant Servers"
- Click on the Server of interest. Example: ML110 G6
- Click on: "Power Calculator" link. (You may need to scroll down to see it)
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 34
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Technical Specifications
System Unit
Dimensions (HxWxD)
(with feet)
Weight (approximate)
Input Requirements
(per power supply)
14.38 x 6.9 x 16.8 in (36.52 x 17.5 x 42.6 cm)
Maximum
(all hard drives, power
supplies, and processors
installed)
Minimum
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
30.53 lb (13.85 kg)
25.13 lb (11.4 kg)
90 to 132 VAC,
180 to 264 VAC
Rated Input Current
5 A (at 100 VAC),
2.5 A (at 200 VAC)
Rated Input Frequency
47 to 63 Hz
Rated Input Power
400 W (at 100 VAC),
400 W (at 200 VAC)
Power Specifications
To review typical power ratings use the Power Advisor which is available via
the online tool located at URL: http://www.hp.com/go/hppoweradvisor
Power Supply Output
Rated Steady-State Power 300 W (at 100 VAC),
(per power supply)
300 W (at 200 VAC)
Maximum Peak Power
300 W (at 100 VAC),
300 W (at 200 VAC)
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 304.8 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System may shut down if operating with a fan
fault or above 42°C °(107.6°F).
Non-operating
-35° to 65°C (-31° to 149°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Relative Humidity
Operating
10% to 90% relative humidity (Rh), 28°C
(non-condensing)
(82.4°F) maximum wet bulb temperature, noncondensing.
Non-operating
10% to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, noncondensing.
Altitude
Operating
3048 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 609
m/min (2000 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 609 m/min (2000 ft/min).
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 35
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Technical Specifications
Acoustic Noise
Emissions Classification
(EMC)
HP 160GB 3G SATA
7.2K rpm LFF (3.5-inch)
Non-hot Plug Entry 1yr
Warranty Hard Drive
458947-B21
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
L WAd
4.32 Bels
24.9 dBA
L pAm
Operating
L WAd
4.41 Bels
L pAm
25 dBA
NOTE: The listed sound levels above apply to standard SATA configurations.
Additional options may result in increased sound levels..
FCC Rating
Class B
CISPR 22; EN55022; EN55024; FCC CFR 47,
Normative Standards
Pt 15; ICES-003; CNS13438; GB9254; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and
statements.
Capacity
Height
Maximum drive dimension
Width
Depth
Maximum drive dimension
Interface
Transfer Rate
(Maximum)
Native Command
Queuing
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
DA - 13477
160,041MB
1.028 in. (26.1 mm)
4.00 in (101.6 mm)
5.787 in (147.0 mm)
Serial ATA
3Gb/s
Supported
Single Track
2.0 ms
Average
<11 ms
Full-Stroke
22.0 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
312,581,808
50° to 95° F (10° to 35° C)
Worldwide — Version 21 — July 8, 2011
Page 36
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Technical Specifications
HP 250GB 3G SATA
7.2K rpm LFF (3.5-inch)
Non-hot Plug Entry 1yr
Warranty Hard Drive
571232-B21
Capacity
Height
Maximum drive dimension
Width
Depth
Maximum drive dimension
Interface
Transfer Rate
(Maximum)
Native Command
Queuing
250,059MB
1.028 in. (26.1 mm)
Seek Time
(typical reads, including
settling)
Single Track
2.0 ms
Average
11 ms
Full-Stroke
21.0 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
488,397,168
50° to 95° F (10° to 35° C)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
HP Half-Height 16X Max Disk
SATA DVD-ROM Optical
Drive
Applicable Disk
Capacity
Block Size
Interface
Access Times (typical)
Data Transfer Rate
Cache Buffer
Start-up Time (typical)
Stop Time
Laser Parameters
Operating Conditions
Dimensions
DA - 13477
DVD Media
SATA
Random
Full-Stroke
Sustained
128 KB
< 7 seconds
< 4 seconds
Type
Wave Length
Temperature
Humidity
(HxWxD, maximum)
Weight
4.00 in (101.6 mm)
5.787 in (147.0 mm)
Serial ATA
3Gb/s
Supported
CD-ROM, CD-XA, CD-DA
(Mode 1, Mode 2, Form 1 and 2)
Photo CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
CD-R, CD-RW, DVD-ROM, DVD+R, DVD+RW
4.7 GB (DVD-5)
8.54 GB (DVD-9)
2,048 bytes
3Gb/s
<140 ms
<250 ms
8100 to 21600 KB/s (6X to 16X)
Semiconductor Laser GaA1As
780 ± 25 nm
41° to 122° F (5° to 50° C)
10% to 90%
1.7 x 5.85 x 8.11 in (42.9 x 150 x 195 mm)
2.64 lb (1.2 kg)
Worldwide — Version 21 — July 8, 2011
Page 37
QuickSpecs
HP ProLiant ML110 Generation 6 (G6)
Technical Specifications
Embedded NC107i PCIe Network Interface
Gigabit Server Adapter
(Embedded)
Data Transfer Method
Controller
Network Transfer Rate
Connector
Cable Support
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Integrated 10/100/1000BASE-T Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver.
Compliant to x1 PCIe Specification
BCM5723
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Half and
2000Mb/s
Full-Duplex)
RJ-45 connector
Performs all the physical layer functions for 10BASE-T, 100BASE-T, and
1000BASE-T Ethernet on standard Category 5 UTP
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are
trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13477
Worldwide — Version 21 — July 8, 2011
Page 38