EVSE

PEdEStal charging

StationS

PoWEr YoU can dEPEnd on

Milbank PowerGen TM ’s level II electric vehicle car charger delivers a full charge to your electric vehicle (EV) or plug-in electric vehicle (PHEV) in just a few hours. With AC power, electricity is transferred from the charging station to the vehicle’s on-board charger.

Milbank’s industrial-grade enclosure is ideal for Electric Vehicle fleet operations. With secure, lockable cabinets, you can control the use of your charging stations.

Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 877.483.5314 | milbankworks.com

PEdEStal charging StationS fEatUrES

• Secure, lockable cabinet to prevent theft and vandalism

• In-use front door allowing user to close and lock the access door while charging the EV or

PHEV

• Lockable back service panel to allow only the contractor access for installation and service

• Dual feed lugs for loop feeding multiple units

• 40A 2P breaker disconnect included inside the back panel for power shutdown

• Pre-wired at the factory for easy installation

• Optional pad mount base installed in concrete for pedestal attachment, eliminating the need for drilling/installing anchor bolts

SPEcificationS

Model number connector

Voltage frequency current operating temperature

Storage/transit temperature humidity dimensions

(l x W x h)

Weight cord length

Enclosure

CPEV0111JSW1

SAE J1772

208VAC to 240VAC

50Hz / 60Hz

30A max

-30°C to 50°C

-22°F to 122°F

-40°C to 60°C

-40°F to 160°F

Up to 95% non-condensing

48” x 12” x 17.5”

(approximate)

120 lbs.

Up to 25’ available

NEMA 3R

note: Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation.

3

year warranty

Milbank | 4801 Deramus Ave., Kansas City, MO 64120 | 877.483.5314 | milbankworks.com