advertisement
Detection System
Model 500 Series
Owner’s Manual
3M is the exclusive worldwide distributor of Checkpoint products to libraries.
Copyright © 2008, 3M. All rights reserved.
3M TM Detection System Model 500 Series Owner’s Manual. 78-8129-3294-1, Rev. A.
3M is a trademarks of 3M.
Contents
Copyright © 2008. 3M. All rights reserved.
i
Contents ii
Copyright © 2008, 3M. All rights reserved.
Introduction
The global leader in library systems products
Welcome to the group of libraries using Checkpoint EM detection systems to protect collections and improve library service.
The purpose of this manual is to help library directors and supervisory staff understand the detection system and provide ideas on communicating system operation and function to staff and library users.
By incorporating this manual’s recommendations with your own policies and procedures, you can achieve a high level of collection security. Supervisors should acquaint themselves with the contents of this manual and use it to teach library staff.
Keep it readily accessible. Do not file it away. It is intended to be a ready reference source.
Your 3M service representative will conduct in-service training that will include an explanation of the contents of this manual.
Once training is completed, it is the responsibility of the director—delegated through supervisors—to train library staff and ensure that library policies and procedures are followed when working with the system. If this manual does not provide all required information, please contact your local 3M sales representative.
What this means to you
From the best-trained field service organization to our technical service group and customer support staff, we are committed to providing you with the support you require to help ensure your satisfaction.
The system has been designed to detect the unauthorized removal of materials concealed within book bags, briefcases, or under clothing. While a 100% electronic net does not exist, the system provides effective protection and significant reduction in the loss of typical library materials.
With a little attention and care, your system should provide you with many years of service and help to protect your library against losses. Call our toll-free 800 number any time of the day or night for service, to order supplies, or to leave messages for your sales representative at 1-800-328-0067.
Copyright © 2008. 3M. All rights reserved.
1
Introduction
2
Copyright © 2008. 3M. All rights reserved.
Training your staff
A key element of any media loss prevention effort is a successful staff training program. Your system will be much more effective with the active cooperation and participation of your entire library staff. We recommend that you periodically conduct formal training sessions, including the following elements to ensure its success:
• Reviewing the owner’s manual
• Practice tagging materials with strips.
• Reviewing your library’s security policies
• Reviewing how to respond when the alarm sounds
• Using the system alarm log
• Addressing patron concerns
Owner’s manual
This manual contains the information necessary to operate your Checkpoint EM Detection System, as well as supplemental information on handling alarms, ordering supplies, and training your staff. It also contains important information about security strips and circulation accessories.
Library personnel should be familiar with the manual and where to locate it so they can refer to it when necessary.
Hands-on practice
After reviewing this manual, your staff will benefit from actual hands-on experience with the detection system products they are expected to use. We suggest you start by demonstrating the proper techniques for applying security strips to items.
You may wish to conduct the actual practice as follows:
1.
Make sure that all the other security system accessories are installed and functional.
2.
Let each staff member practice installing strips and markers on library items.
3.
Let each staff member practice sensitizing and desensitizing materials.
Note: For additional information on installing strips and markers, refer to the Accessories and Strips User’s Guide
(78-8129-3502-7).
Copyright © 2008. 3M. All rights reserved.
3
4
Training your staff
Review of your library’s security policies
Before practicing how to respond to alarms, staff should be familiar with the library’s security policies as they relate to theft of materials. To help staff stay informed of security measures, your policy should be in writing and kept with your training kit along with any other procedures you follow.
It is particularly important for staff members to know what procedures the library follows when theft is suspected or when it is necessary to contact a local law enforcement agency.
A critical phase of staff training concerns the proper steps to take when the security system alarm sounds. The value of tact and courtesy when handling this delicate situation cannot be overemphasized. Your staff members should receive as much preparation as possible to make them feel comfortable. With the proper training, your staff will be more likely to effectively deal with patrons who activate the alarm.
What to do when the alarm sounds
The following steps are suggested procedures only. We recommend that all staff develop a complete understanding of the library’s policies and follow them as directed. The response should be consistent for all patrons caught in an alarm. It is also important that staff become familiar with state and local laws governing patrons’ rights and responsibilities.
Responding to Alarms
Responding to alarms is a sensitive situation but can be handled confidently and effectively as long as your library has established procedures and your staff members are fully trained in following them.
First, don’t panic. Remain calm and courteous. You can’t be positive that the person who triggered the alarm is stealing. Never accuse anyone of theft by word, by facial expression, or by tone of voice. The alarm may have been triggered accidentally, so always respond in a positive, non-threatening manner.
Alarm Scenario 1
The library staff does not desensitize a tagged item when checking out the patron’s materials, or the patron accidentally removes marked materials from the library.
After asking the patron to return to the counter, a typical response might be, "Excuse me, did I forget to check out one of your items?" or "Did you perhaps pick up one of the library’s books with your own things?” These are courteous questions, and they don’t accuse the patron of theft. Be sure to smile and ask the questions in a friendly, non-threatening manner.
Process and desensitize all items again. If you discover an item that hasn’t been properly checked out, never accuse the patron of stealing. Simply act as if the error was an oversight—it more than likely was. If the patron causes the alarm to sound again, follow the policy that your library has established for possible theft of materials.
Alarm Scenario 2
A patron denies having any library materials or runs out of the library after sounding the alarm.
Follow your library’s policy for theft.
Copyright © 2008. 3M. All rights reserved.
Training your staff
Unwanted alarms
Your detection system is unlikely to experience false alarms. Occasionally your system may alarm and your staff may find that the patron does not have unauthorized library materials. False alarms may be caused by active strips on items carried into the library such as books from another library.
False alarms are generally infrequent and will vary depending on the patrons and the proximity of your library to facilities that are releasing items containing security strips. Because it is not possible to distinguish between false alarms and alarms with potential item loss, all responses to alarms must be consistent and follow your management policies. If patrons see no response to alarms, the system becomes less effective. When you decide that a security strip on an item from outside your library caused an alarm, follow these steps:
1.
Explain the problem to the patron.
2.
Verify that all of the patron’s library materials are properly checked out.
3.
Allow the patron to exit the library.
Many patrons will learn from the experience and will not carry items that may cause alarms into the library.
Alarm log
The alarm log is used to keep a record of details involving alarms that occur. See the Detection System Alarm Log. For each alarm, record the information on the log. Keeping this log up-to-date provides a key tool for monitoring system activity. An up-to-date alarm log provides useful information for library management and your 3M service representative.
Detection system alarm log
Reported By
Date
Alarm
Time
Patron
Count
*Alarm
Reason
(1, … 5)
$ Value of
Recovered
Materials
Description of
Recovered Materials
Copyright © 2008. 3M. All rights reserved.
5
Training your staff
*Alarm reason:
1.
Test
2.
Upon entering
3.
Failure to un-secure
4.
Undetermined
5.
Real alarm
6
Copyright © 2008. 3M. All rights reserved.
How the System Works
Your Checkpoint EM Detection system consists of several components, which include security strips, circulation accessories, and the detection system.
The key to the effectiveness of your system is protecting your materials with security strips. Only when materials are protected can your detection system detect someone trying to leave your library without properly checking out items.
The primary zone of detection is areas where patrons typically carry items. The electronic coverage in this area is not 100%, and it will vary with the options you have and the type of security strips/markers you use. However, the rate of detection is effective to deter the loss of protected materials.
Checking out materials is accomplished using desensitizers to “turn off” the strips while re-sensitizers are used to “turn on” the strips when materials are returned to the library. This allows for full circulation of all library materials.
The Checkpoint detection systems are designed to detect sensitized security strips and then sound an alarm, thus preventing unauthorized removal of library materials.
It is this simple:
• Mark the materials.
• Circulate the materials using desensitizers and re-sensitizers.
• Listen for the detection system alarm to sound when unauthorized removal of materials occurs. It is also important to watch for suspicious actions such as holding materials above the head or moving items around the lattices when passing through the detection system.
Copyright © 2008. 3M. All rights reserved.
7
How the System Works
8
Copyright © 2008. 3M. All rights reserved.
System Configurations
Figure 1 Model 501 single-corridor system and Model 502 dual-corridor detection systems.
Construction
The detection system has the durability to withstand typical library traffic. Both single- and dual-corridor systems can be installed with a threshold or buried cable, or on a baseplate.
Copyright © 2008. 3M. All rights reserved.
9
System Configurations
Power requirements
A dedicated power line is recommended but not required.
Voltage
Amperes
100/120 VAC 50 or 60 Hz
1.8 A @ 100/120 VAC
220/240 VAC 50 or 60 Hz
1.0 A @ 220/240 VAC
WARNING
To reduce the risks associated with hazardous voltage:
• Do not use the product if the case, covers, or power cord are damaged.
• Do not attempt to modify, service, or repair—no user serviceable parts inside—contact 3M Service for repair.
Detection zone
The primary zone of detection is in areas where patrons typically carry items. The electronic coverage in this zone is not
100%, however, the rate of detection is effective to deter the loss of protected materials. It is important to watch for suspicious actions such as holding materials above or outside the lattices when passing through the system.
Indicators
Type
Power indicator
Slave indicator
Lattice alarm lights
Audible alarm
Description
Green LED on the electronics enclosure indicates power on.
Yellow LED on the electronics enclosure indicates that 2 controllers are connected.
Indicates an Alarm.
Alarm outputs
Visual Visual alarm indicator lights are located on top of each lattice. If the lights are on, an alarm condition has occurred.
Audio An audible alarm speaker is mounted on each lattice. Alarm volume can be adjusted by a technician.
Copyright © 2008. 3M. All rights reserved.
10
Cleaning Instructions
Lattice and base
Turn off the detection system prior to using liquid cleaners. Use towels or soft cloths dampened with a common household grease-cutting liquid cleaner to remove dirt and greasy buildup. Clean monthly to retain the best equipment appearance.
Copyright © 2008. 3M. All rights reserved.
11
Cleaning Instructions
12
Copyright © 2008. 3M. All rights reserved.
System Operation
Turning the System On
Follow these steps to turn the system on:
1.
Ensure that the power cord is connected to a power outlet.
2.
Allow 15 seconds for the system to warm up.
Turning the System Off
Remove power from the system by one of the following methods:
• Disconnect the AC power cord from the power outlet.
• Set the facility circuit breaker for the system to the Off position.
Verifying system operation
Inspect your system daily for proper operation. To verify system operation, walk through the system corridor normally with a secured library item. This should result in an audible alarm and a flashing alarm light at the top of the lattices. There is no need for repetitive walk-through testing.
Copyright © 2008. 3M. All rights reserved.
13
System Operation
Fuse replacement
The fuses are located on the side above the power cord of the electronics enclosure.
1.
Disconnect the power cord from the power source.
2.
Using a small flat-blade screwdriver, remove the fuse holder.
3.
Replace the failed fuses with a 5A 250V 5mmx20mm glass fuse.
4.
Reinstall the fuse holder, and connect the power cord to the power source.
14
Copyright © 2008. 3M. All rights reserved.
Solving problems
Problem
No alarm, no green power indicator on the electronics enclosure.
No alarm, power indicator on.
Unwanted alarms.
Reduced coverage, no alarm.
Alarm intermittent with no traffic in corridor.
Cause
No power at receptacle.
Power cord disconnected at receptacle.
System fuse open.
System failure.
Processor requires reset.
Strips in book desensitized or missing.
Metal objects too close to lattice.
Action
Reset facility circuit breaker.
Plug power cord into receptacle.
Replace fuse in the electronics enclosure.
See fuse replacement procedure.
Place a service call.
Turn the system off, wait 5 seconds, then turn the switch on.
Resensitize books, or install a security strip in the book.
Move all metal to minimum distance of 36 inches from the lattices.
Place a service call.
Identify material that caused the alarm.
System failure.
Protected material from another library or a retail store.
Failure to desensitize strips properly.
Miscellaneous metallic objects.
System failure.
Metal objects too close to lattice.
Electrical interference.
Incomplete walk-through test.
Books not properly resensitized.
System failure.
Metal objects too close to a lattice.
Marked book or strips too close to lattice.
Electrical interference.
System failure.
Check desensitizing process and training.
Infrequent unwanted alarms are possible from some metal objects .
Place a service call.
Move all metal to minimum distance of 36 inches from the lattices.
Remove possible sources of electrical interference such as computers, copiers,
TVs, electronic devices, or energy management systems.
Test the system by walking completely through the corridor.
Resensitize book, check sensitizing method and staff training.
Place a service call.
Move all metal objects to a minimum of 36 inches from the lattice.
Move the marked books to a minimum of
36 inches from the lattice.
Eliminate source of interference.
Place a service call.
Copyright © 2008. 3M. All rights reserved.
15
Solving problems
3M Service phone numbers
For questions regarding your system, call one of the following numbers.
In the United States
1-800-328-0067
In Canada
English 1-800-268-6235
Français 1-800-567-3193
In other countries
Call your local 3M office.
16
Copyright © 2008. 3M. All rights reserved.
Warranty
Effective 12-12-05
One Year Library Systems Product Performance Guarantee: Subject to the Limitation of Liability below, 3M guarantees your satisfaction with the performance of any 3M Library System Product for 12 months from the date of installation provided that a) you are the original purchaser: b) you have executed a one (1) year 3M Service Agreement for maintenance of the Library
System product; and c) the product has not been subjected to abuse, misuse, accident or neglect. Performance means the product meets 3M published product specifications. If you are not completely satisfied with the performance of your Library
System Product, you may return the Library System product for a prompt refund. 3M will pay all reasonable de-installation and shipping charges to return the product to 3M. Note that all claims under this guarantee must be submitted to 3M within 12 months from the date of installation of the 3M Library Systems Product. Failure to submit a claim within this time frame will invalidate this guarantee. IMPORTANT: Consumables and non-3M branded products are excluded from this Guarantee.
Warranty and Limited Remedy for Non-Software Library Systems Products Not Covered by Performance Guarantee:
Unless stated otherwise in 3M product literature or packaging, 3M warrants that each 3M Library Systems Product meets the applicable specifications for a period of ninety (90) days from the date of shipment (or, in the case of hardware installed by
3M, from the date of installation). Any warranties related to 3M software are contained in separate 3M software licenses.
Consumables and non-3M branded products are excluded from this Warranty and Limited Remedy.
3M MAKES NO OTHER GUARANTEES, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT
OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. You are responsible for determining whether the 3M product is fit for a particular purpose and suitable for your application. If the 3M product is defective within the warranty period and provided that a) the product has not been subjected to abuse, misuse, accident or neglect and b) you have notified
3M within thirty (30) days after the defect was discovered, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace or repair the defective 3M product.
Limitation of Liability: EXCEPT WHERE PROHIBITED BY LAW, 3M AND SELLER WILL NOT BE LIABLE
FOR ANY LOSS OR DAMAGE ARISING FROM 3M LIBRARY SYSTEMs, WHETHER DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL, REGARDLESS OF THE LEGAL THEORY ASSERTED,
INCLUDING WARRANTY, CONTRACT, NEGLIGENCE OR STRICT LIABILITY.
Guarantee and Warranty Claims: For guarantee and warranty claims, and for service, contact our service representatives at 1-800-328-0067
3M Security Systems Division
3M Center Building 255–4N-14
St. Paul, MN 55144–1000
Ver121205
Copyright © 2008. 3M. All rights reserved.
17
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project