DSN-3000 Series Managed SAN Solutions Features + Handles Over 80,000 I/Os per Second + Battery Protected Cache Memory: Up to 4GB + System Memory: Up to 512MB + 15 Hot-Swap SATA Hard Drive Bays + 30TB Capacity with 2TB Hard Drives (Supports higher capacity drives as they are introduced) + SATA-II Support + 760 Watt Redundant Power Supply + Industry Standard 3U 19-inch Chassis xStack Storage® 8x1GbE/1x1GbE iSCSI SAN Arrays The D-Link® xStack Storage® Area Network (SAN) Arrays (DSN-3200 & DSN-3400) provide a reliable network data storage solution for customers in entry-level and SMB segments. Utilizing a 10Gbit iSCSI System-on-a-Chip (SoC) solution that can handle over 80,000 I/Os per second and capable of supporting 30TB raw capacity using 2TB hard drives (and even higher capacity hard drives as they are introduced), the DSN-3000 Arrays can easily be implemented as nearline storage to supplement your primary IP network storage solution or used as a basic backup and recovery device. This evolutionary advancement in performance is a testament to the tightly integrated xStack Storage architecture and is a sharp contrast to the discrete implementation of competing products. System-on-a-Chip (SoC) Implementation By utilizing a SoC design, the DSN-3000 Series SAN Arrays combine both networking and storage functions into a single specialized Application Specific Integrated Circuit (ASIC). The SoC solution combines 10Gbps iSCSI, TCP & IP ofﬂoad, embedded processors, and a storage virtualization firmware stack onto a single chip. The tight integration of these functions eliminates interoperability, timing, and support issues found in competitive products that offer “discrete implementation” wherein a chassis, a main motherboard, a RAID storage controller, iSCSI software or controller, network interface cards, and operating system software are picked separately and then assembled. The DSN-3000 line outperforms these discrete implementations and does so at a lower price point, while delivering mission critical data quickly with state-of-the-art reliability. RAID Support + 0, 1, 1+0, and 5 High Performance iSCSI Interface + DSN-3200: Eight 1GbE Ports + DSN-3400: Single 10GbE Port Storage Network Management + IP SAN Device Manager (IDM) iSCSI for IP Networks SAN has been traditionally reserved for Fibre Channel networks until the recent introduction of iSCSI extended this powerful yet simple centralized backend (behind server-based) storage system to IP networks. By utilizing existing Ethernet technology, the cost associated with separate host bus adapters and the per-Gigabyte cost for storage is significantly reduced. IP SANs based on iSCSI technology can leverage existing and familiar Ethernet standards to provide speeds of up to 1160 MB/s bandwidth (DSN-3400). RAID for Efficiency The DSN-3000 Series SAN Array platform features 15 hot swappable Serial ATA (SATA) disk drive bays supporting 30TB raw capacity using 2TB hard drives (and even higher capacity hard drives as they are introduced) in RAID level 0, 1, 1+0 and 5 configurations. You can quickly deploy a SAN using inexpensive SATA disk drives, and depending on your growing storage needs, you can simply add more drives as you go. + Remote Monitoring and Configuration Embedded Centralized Storage Management + CHAP Authentication Helps Halt Intruders + SSL Security to Management Console A Choice of Host Interfaces – 1GbE or 10GbE The DSN-3200 implements eight 1GbE ports and supports IEEE 802.3ad Link Aggregation Groups (LAG) for full ofﬂoad capability so that all eight ports can be grouped together, totaling up to 850MB/s bandwidth, for increased throughput and redundancy. The DSN-3400 implements the industry’s first built-in, fully integrated 10GbE interface in the XStack Storage cost effective solution. Providing up to 1160MB/s bandwidth, it offers a high performance alternative to 4Gbps Fibre Channel. The embedded, user-friendly IP-SAN Device Manager (IDM) provides comprehensive network storage management. Boasting a rich set of management features, this suite of utilities allows monitoring and control of your SAN via the SMI-S (Storage Management Initiative) command set. Combined with an embedded secure server, users will be able to remotely configure and monitor their SAN storage subsystems. DSN-3000 Series Managed SAN Solutions xStack Storage® 8x1GbE/1x1GbE iSCSI SAN Arrays Advanced Management Features RAID Support for RAID Levels 0, 1, 1+0 and 5 (striped sets, mirrored sets, striped mirrored sets, and parity sets) allows for different storage options. The DSN-3000 Series provides additional advanced features for efficient management of network storage and optimal performance. Online Capacity Expansion and RAID Level Migration is performed online with minimal impact on users. For example, a mirror volume of two drives can easily be converted to a parity volume of three or more drives while users continue to access this storage. Cache Management provides adaptive and persistent cache management. This provides write-back, write-through, write coalescing and multi-stream read-ahead on a volume basis, optimizing cache utilization and performance in an application-dependent manner. Micro Rebuilds provide protection against unresponsive SATA commands by forcing a response within a preset time limit. VLAN Zoning supports IEEE 802.1q VLAN tagging to segregate traffic into isolated zones for secure access and jumbo frames, improving network throughput and reducing CPU overhead. Whether you are looking for a low-cost block-based solution for data backup and recovery, replacement of some of your inefficient Direct-Attached Storage (DAS) drives, or cost-effective centralized storage for your servers, the DSN-3000 Series has a solution for you. Volume Virtualization utilizes the concept of storage Extents. Extents are the fundamental building blocks used to enable features such as RAID, online capacity expansion and volume migration. Drives of disimilar size can be used to create volumes. Growth can occur without volume migration or reconstruction. Single drives can contain multiple and divergent RAID technologies. Volume structure can also provide infrastructure for Snapshot copies. Technical Specifications Model DSN-3200 DSN-3400 Features Drive Bays 15 15 Drive Interface Support SATA-II support SATA-II support System Memory 256MB to 512MB (512MB standard) 256MB to 512MB (512MB standard) Cache Memory 256MB to 4GB (512MB standard) 256MB to 4GB (512MB standard) Battery Backup for Cache Standard (approximately 72 hours on full charge) Standard (approximately 72 hours on full charge) Bandwidth Up to 850Mbytes per second Up to 1,160Mbytes per second Storage Capacity 30TB Capacity with 2TB Hard Drives (supports higher capacity drives as they are introduced) 30TB Capacity with 2TB Hard Drives (supports higher capacity drives as they are introduced) Operating Systems Supported Windows Vista® 32-bit & x64 (Ultimate & Enterprise) w/Built-in iSCSI initiator Windows Vista 32-bit & x64 (Ultimate & Enterprise) w/Built-in iSCSI initiator Windows Server® 2003 32-bit & x64 SP1 (Standard & Enterprise) w/v2.07 iSCSI initiator Windows Server 2003 32-bit & x64 SP1 (Standard & Enterprise) w/v2.07 iSCSI initiator Windows Server 2003 R2 32-bit & x64 (Standard & Enterprise) w/v2.07 iSCSI initiator Windows Server 2003 R2 32-bit & x64 (Standard & Enterprise) w/v2.07 iSCSI initiator Windows® XP Pro 32-bit & x64 w/v2.07 iSCSI initiator Windows XP Pro 32-bit & x64 w/v2.07 iSCSI initiator Windows 2000 Advanced Server w/v1.6 & v2.01 iSCSI initiator Windows 2000 Advanced Server w/v1.6 & v2.01 iSCSI initiator Red Hat® 7.3 Red Hat 7.3 Please see support.dlink.com for latest support information DSN-3000 Series Managed SAN Solutions xStack Storage® 8x1GbE/1x1GbE iSCSI SAN Arrays Model DSN-3200 Operating Systems Supported (Cont.) DSN-3400 Red Hat Enterprise AS update 5 Red Hat Enterprise AS update 5 SuSE® Professional 9.3 32-bit & x64 SuSE Professional 9.3 32-bit & x64 SuSE Enterprise Server 10.2 32-bit (x86) SuSE Enterprise Server 10.2 32-bit (x86) Mac OS X (10.4 & 10.5) Mac OS X (10.4 & 10.5) Intel Pro 1000MT & XT [1GbE] Intel Pro 1000MT & XT [1GbE] Intel Pro 10000 CX4 [10GbE] Intel Pro 10000 CX4 [10GbE] Myricom 10G-PCIE-8A-C+E [10GbE] Myricom 10G-PCIE-8A-C+E [10GbE] Chelsio S310X-SR-XFP [10GbE] Chelsio® S310X-SR-XFP [10GbE] Neterion® Xframe® II & Xframe E [10GbE] Neterion Xframe II & Xframe E [10GbE] Alacritech® SES2104ET (drivers: SNP 188.8.131.522 & 184.108.40.206) Alacritech SES2104ET (drivers: SNP 220.127.116.112 & 18.104.22.168) Alacritech SES2102ET (drivers: SNP 22.214.171.1242 & 126.96.36.199) Alacritech SES2102ET (drivers: SNP 188.8.131.522 & 184.108.40.206) QLogic 4010C, 4052C, & 4062C QLogic® 4010C, 4052C, & 4062C iSCSI Network Interface Eight 1GbE Copper One 10GbE (XFP Copper or Fiber sold separately) Host Interface iSCSI Draft 20 compliant initiator iSCSI Draft 20 compliant initiator Connections 1,024 hosts 1,024 hosts CHAP Authentication Yes Yes Access Control of Management Yes Yes iSCSI/TCP/IP Full HW Offload Yes Yes Jumbo Frames Support Yes Yes LAG Support (Link Aggregation) Up to eight LAGs (IEEE802.3ad Link Aggregation Group) Not Applicable VLAN Support Up to eight 1-to-1 mapping between IP subnet and VLAN. Multiple VLANs per physical port with VLAN tag. All physical ports in LAG belong to same VLAN (IEEE802.1Q Tag) Up to eight 1-to-1 mapping between IP subnet and VLAN. Multiple VLANs per physical port with VLAN tag (IEEE802.1Q Tag) RAID Controller Single- Integrated in ASIC Single- Integrated in ASIC RAID Support RAID Levels 0, 1, 1+0 and 5 RAID Levels 0, 1, 1+0 and 5 (Striped sets, mirrored sets, striped mirrored sets and parity sets) (Striped sets, mirrored sets, striped mirrored sets and parity sets) Volumes 1,024 Virtual Volumes (256 accessible per initiator) 1,024 Virtual Volumes (256 accessible per initiator) Target Nodes 1,024 1,024 Online Capacity Expansion Yes Yes Hot Swappable Drives Yes Yes Instant Volume Access Yes Yes Free Space Defragmentation Yes Yes Auto-Detection Failed Drive Yes Yes Please see support.dlink.com for latest support information Supported NICs, iSCSI Accelerators and iSCSI HBAs Please see support.dlink.com for latest support information ® ® ® iSCSI Network Interface Volume & RAID Support DSN-3000 Series Managed SAN Solutions xStack Storage® 8x1GbE/1x1GbE iSCSI SAN Arrays Model DSN-3200 DSN-3400 Auto-Rebuild Spare Drive Yes Yes RAID Level Migration Yes Yes Drive Roaming in Power Off (configured drives are not bayspecific) Yes Yes Micro Rebuilds Yes Yes Create, manage, expand and monitor storage pool, volumes and RAID. Create, manage, expand and monitor storage pool, volumes and RAID. Event manager to view and persist events. Event manager to view and persist events. Firmware Field Upgradeable Yes Yes SMI-S Version 1.1 Yes Yes Supply Type Redundant 3U 2+1 760 Watt Redundant 3U 2+1 760 Watt Input Voltage 90-264 VAC (auto-switching) 90-264 VAC (auto-switching) Input Frequency 47-63 Hz 47-63 Hz Input Current 20A Maximum at 90VAC and 10A Maximum at 264VAC (maximum amps vs. voltage varies linearly throughout this voltage range) 20A Maximum at 90VAC and 10A Maximum at 264VAC (maximum amps vs. voltage varies linearly throughout this voltage range) Power Factor Correction 95%@110V, Full load 95%@110V, Full load Power Consumption 570W (full configuration) 570W (full configuration) Thermal 2000 BTU / hour (full configuration) 2000 BTU / hour (full configuration) Operating Temperature 32° to 104°F (0° to 40°C) 32° to 104°F (0° to 40°C) Storage Temperature -4° to 158°F (-20° to 70°C) -4° to 158°F (-20° to 70°C) Operating Humidity 20% ~ 90% (Non-condensing) 20% ~ 90% (Non-condensing) Storage Humidity 10% ~ 95% (Non-condensing) 10% ~ 95% (Non-condensing) Form Factor 3U industry-standard 19-inch rack 3U industry-standard 19-inch rack Dimensions (W x D x H) 17.2in x 22.5in x 5.2in (438mm x 571mm x 133mm) 17.2in x 22.5in x 5.2in (438mm x 571mm x 133mm) Weight 72.8 pounds / 33 kilograms (full configuration) 72.8 pounds / 33 kilograms (full configuration) Emissions CE Class A, FCC Class A, C-Tick Class A, VCCI Class A CE Class A, FCC Class A, C-Tick Class A, VCCI Class A Safety CSA 60950-1, UL60950-1, IEC 60950-1, EN 60950-1 CSA 60950-1, UL60950-1, IEC 60950-1, EN 60950-1 Storage Management Embedded IP-Based Management GUI Power Environmental Physical (approximate) International Approvals DSN-3000 Series Managed SAN Solutions xStack Storage® 8x1GbE/1x1GbE iSCSI SAN Arrays Model DSN-3200 DSN-3400 Warranty and Support Warranty 3 year limited1 3 year limited1 Extended Warranty Available Available Support 1 year (9 hours per day / 5 days per week Technical Support) 1 year (9 hours per day / 5 days per week Technical Support) Ordering Information Part Number Description DSN-3200-10 xStack 8x1GbE iSCSI SAN Array, 15 Bays, 3U, w/o Drives, with Trays DSN-3400-10 xStack 1x10GbE iSCSI SAN Array, 15 Bays, 3U, w/o Drives, with Trays DSN-210-SW SureSync Replication & Synchronization Software DSN-030 Power Supply Module for DSN-2100/3200/3400 DSN-040 Chassis Fan Module for DSN-2100/3200/3400 DNS-050 Lithium-Ion Battery for DSN-2100/3200/3400 DSN-3200-10-LW Extended Warranty for DSN-3200-10 DSN-3400-10-LW Extended Warranty for DSN-3400-10 Updated 02/22/10 Available in the U.S.A and Canada only. 1 All references to speed are for comparison purposes only. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted. See inside package for warranty details. D-Link Systems, Inc. 17595 Mt. Herrmann Street Fountain Valley CA 92708 www.dlink.com ©2006-2010 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo, xStack, xStack Storage and xStack logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the property of their respective owners.