Panasonic PT-EX16KU data projector

PT-EX16K
PT-LB3
Series
LCD Projector
LCD Projectors
PT-LB3U
PT-LB2VU
Brighter, Large-Screen Images
Solid Reliability and System Expandability
High Brightness of 16,000 lm.
Superb Cost-Performance
for Large-Space Viewing.
Balancing factors required to fill large spaces with breathtaking images.
Remarkable 16,000 lm brightness ensures sharp, crisp large-screen
projection. Pure Color Control, which independently controls yellow
brightness to improve color reproduction, attains this superb brightness
with optimal coloring. The 4-Lamp Optical System maintains high reliability.
And system expansion functions include horizontal/vertical lens shift and
a Multi-Screen Support System. These and other features enable flexible
installation for a wide variety of applications.
PT-EX16K
XGA
High
Brightness
16,000 lm
Solid
Reliability
System
Expandability
Bright, Vibrant Large-Screen Images
High Reliability for Long-Time Use
A Full 16,000 lm of Brightness
and 2,500:1 Contrast
4-Lamp Optical System Enables Stable,
Extended Operation
The 4-lamp optical system uses high-output, 380 W lamps to deliver
remarkable 16,000 lm brightness. And the contrast ratio is a high 2,500:1,
to ensure bright, crisp, large-screen projection.
Even if one lamp goes out during use, the other lamps continue, so
projection is not interrupted. Lamp Relay mode also allows long-time,
continuous operation.
■■ Brightness and Lamp Replacement Cycle Guideline
Lamp
Four lamps (Standard mode)
Four lamps (Eco1,Eco2 mode)
Excellent Colors with Pure Color Control
It is inherently difficult for LCD projectors to attain both high brightness
and superb color reproduction. For this reason, in addition to the three
conventional LCD panels that control the light intensity for the red, blue
and green primary colors, the PT-EX16K also features a Pure Color Control
function that independently controls the light intensity of yellow coloring.
This provides rich overall color expression while maintaining brightness.
■■ Basic Concept of the Pure Color Control
Independent control of yellow
Screen
Projection lens
•Projection with priority on
brightness
Prism
•Projection with priority on color
reproduction
Pure color
control
device
Pure color
control
device
Prism
Full 10-Bit Image Processing System
The use of a full 10-bit image processing system provides smooth tonal
expression. For example, skin tones appear natural and true to life.
Brightness (lm)
16,000
12,320
Lamp replacement cycle (hours) *1
2,000
3,000
Two lamps (Standard mode)
8,000
4,000
Two lamps (Eco1,Eco2 mode)
6,160
6,000
Highly Durable Optical Engine Ensures Excellent
Long-Time Image Quality
The LCD panels and polarizers inside the LCD projector’s optical block
tend to degrade over time. Their degradation strongly and adversely affects
image quality. The inorganic LCD panels and polarizers in the PT-EX16K
resist time-related changes to achieve a replacement cycle of up to 10,000
hours. This maintains high image quality for a very long time.
Adverse Dust Effects Prevented
by a Long-Lasting Air Filter
The use of a large pleated air filter has made it possible to achieve
a replacement cycle of up to 5,000 hours.*2 This greatly reduces
maintenance hassles. The filter is also replaced from the front, so there
is no need to detach the projector from its bracket in ceiling-mounted
applications.
Optional Smoke Cut Filter Provides
Protection from Fine Smoke Particles
The projector can be equipped with an optional Smoke Cut
Filter ET-SFE16 to prevent the entry of not only dust but also
fine smoke particles, such as those used for special effects
at events and stage performances.
ET-SFE16
Excellent System Expandability for Versatile Installation
The Horizontal/Vertical Lens Shift Function
and a Variety of Lenses
Both zooming and focusing can be done by remote control. The wide
adjustment range of the powered horizontal/vertical lens shift function
assures convenience and versatility during installation. A variety of lenses
are also available, from short or long focus zoom lenses to fixed focus
lenses for rear projection. This makes it possible to install the projector in
a variety of locations.
Flexible Installation
The projector can be rotated 360° vertically for flexible
installation. This allows projection from directly
above or below, for exciting visual pvossibilities in art
galleries, theaters and showrooms.
360°
Corner Keystone Correction Enables
Angled Projection
All you need to do is designate four points as the corners of the projected
image, and this function automatically carries out horizontal and vertical
keystone correction.
Multi-Screen Support System Seamlessly
Connects Multiple Screens
Mechanical Shutter for a Total Screen Blackout
The Mechanical Shutter lets you mechanically block the light to
completely blackout the screen, and prevents light leakage from the lens.
When closing the shutter, the projection image gradually fades out, then
gradually fades in when opening, which brings more attractive stage
effects.
Easy Remote Control and Observation
A Web browser on a computer connected through a wired LAN
system lets you remotely operate projectors and check their status.
An e-mail messaging function can also notify you when a lamp
needs replacement, and indicate the overall projector status.
In addition, Multi Projector Monitoring and Control Software is
available for monitoring and controlling
multiple Panasonic projectors
■■ Basic Concept of the Multi Projector
from a single PC. The wired
Monitoring and Control Software
LAN terminal is compatible
Auditorium
Seminar room
with PJLink™(Class1), an open
protocol that is used by many
manufacturers, to enable
integrated control of systems
that contain different brands
Lecture room
Classroom
of projectors.
The Multi-Screen Support System optimally adjusts multiple screens:
Edge blending, color matching and multi-screen processor.
•Edge Blending
The edges of adjacent screens can be blended and their luminance
controlled.
•Color Matching
This function corrects for slight variations in the color reproduction range
of individual projectors.
Color
matching
Edge
blending
With
edge blending
PT-EX16K
Without
edge blending
Overlapping image edges
Versatile Interfaces and Illuminated
Terminals and Control Panel
The wide-ranging terminals include 2 sets of RGB inputs, an HDMI input,
and a DVI-D input. Mounting the optional Interface Board ET-MD16SD1
also accommodates HD/SD-SDI signal input. The terminal connection
area is LED illuminated, and a backlight is provided for the control panel
buttons, ensuring smooth and easy operation in the dark.
Robust Carrying Handles
An iron base plate is mounted to the bottom of the
main unit. Also, robust carrying handles attached
to the base plate are designed for easy carrying of
the projector.
Top-Panel Lamp Replacement
Simplifies Maintenance
The lamp can be reached through the top panel
for easy replacement. This eliminates the need to
detach the projector from its ceiling bracket and
greatly simplifies maintenance.
Other Features
•Direct Power Off allows the power cord to be unplugged right after use.
•Wireless and wired remote control that allows the allocation of up to 64 IDs.
*3
•Logo Transfer Software lets you upload any startup logo you want.
Ecology-Conscious Design
• No halogenated flame retardants are used in the cabinet.
• Lead-free glass is used for the lens.
• Lamp power switching further reduces power consumption.
• RoHS compliant
*1 The values above are maximum values when they are used in cycles of being turned on for 2 hours and off for 0.25 hours.
When the lamps are turned on and off more frequently, the lamp replacement cycle is shortened.
*2 The usage environment affects the duration of the filter.
*3 Still images that can be uploaded are limited to 1,024 x 768 pixel bitmap files. Also, the application reduces the number of colors to 191.
Specifications
Dimensions
RGB (analog)
Scanning
frequency
YPBPR (YCBCR)
Video/S-Video
Optical axis shift
Keystone correction range
Installation
DVI-D IN
INPUT1
HDMI IN
ANALOG IN
RGB 5BNC IN/
INPUT2 VIDEO IN
Terminals
S-VIDEO IN
INPUT3
INPUT4
SERIAL IN
SERIAL OUT
LAN
REMOTE IN
USB
Cabinet materials
Dimensions (W × H × D)
Weight
Noise level
Operating environment
Supplied accessories
200-240 V AC(11A), 50/60 Hz
1,850 W (18 W with standby mode)
46 mm (1.8 inches) diagonal (4:3 aspect ratio)
Transparent LCD panel (× 3, R/G/B)
786,432 (1,024 × 768) × 3, total of 2,359,296 pixels
Stripe
Optional
380 W × 4, lamp replacement cycle (Normal/Eco1, Eco2): 2,000 hours/3,000 hours*1
1.02–15.24 m (40–600 inches) (2.54–15.24 m (100–600 inches) with the ET-ELS03), 4:3 aspect ratio
16,000 lm (4-Lamps, Lamp power: Auto, Image select: Dynamic/Standard, Advanced color: Auto, Optional lens: ET-ELS03)
90%
2,500:1 (full on/full off, 4-Lamps, Lamp power: Auto, Image select: Dynamic/Standard, Advanced color: Auto)
1,024 × 768 pixels (Input signals that exceed this resolution will be converted to 1,024 × 768 pixels.)
Horizontal: 26–80 kHz, vertical: 23–85 Hz, dot clock: 162 MHz or lower
fH: 15–120 kHz, fV: 48–120 Hz, dot clock: 230 MHz or lower
(Signals exceeding the dot clock rate of 165 MHz are downsampled.)
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 67.50 kHz, fV: 60 Hz [1080/60p]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
With the ET-ELW06: vertical ±38% from center of screen (powered)*3
With the ET-ELW02/ELW04/ELS03/ELM01/ELT02/ELT03: vertical ±38%, horizontal ±10% from center of screen (powered)
With the ET-ELS02: vertical ±50%, horizontal ±10% from center of screen (powered)
Vertical: Maximum ±40° (with XGA signal input, for vertical correction only),
Horizontal: Maximum ±40° (with XGA signal input, for horizontal correction only)
Ceiling/floor, front/rear
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)–WUXGA (1,920 x 1,200)*4, compatible with non-interlaced signals only, dot clock: 25–162 MHz
HDMI 19-pin x 1 (compatible with HDCP, compatible with Deep Color)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/ 50p,
VGA (640 x 480)–WUXGA (1,920 x 1,200)*4, compatible with non-interlaced signals only, dot clock: 25–162 MHz
D-Sub HD 15-pin (female) × 1 (RGB × 1)
650 (25-5/8)
Zoom lens
Throw ratio
(4:3 aspect
ratio)
ET-ELW02
ET-ELW03
ET-ELW04
ET-ELS02
ET-ELS03
ET-ELM01
ET-ELT02
ET-ELT03
Interface Board for
HD/SD-SDI input
Smoke cut filter unit
Replacement smoke cut
filter for the ET-SFE16
Ceiling mount
bracket for
low ceilings*6
Ceiling mount bracket
for high ceilings*6
Replacement lamp unit
Replacement filter unit
ET-ELW06
ET-ELW02
ET-ELW04
1.4 – 1.8:1
1.5 – 2.0:1
2.0 – 2.6:1
min.
max.
min.
max.
min.
max.
min.
max.
2.6 – 3.5:1
min.
max.
ET-SFE16
ET-SRE16
ET-PKE16S
ET-PKE16H
Mini DIN 4-pin × 1 (S-Video)
Optional interface board slot, with the ET-MD16SD1:SERIAL IN(BNC)×2 (SD-SDI signal/single link HD-SDI signal), SERIAL OUT(BNC)×1 (active through)
Optional interface board slot, with the ET-MD16SD1:SERIAL IN(BNC)×2 (SD-SDI signal/single link HD-SDI signal), SERIAL OUT(BNC)×1 (active through)
D-sub 9-pin (male) × 1 for external control
D-sub 9-pin (male) × 1 for link control
RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class1))
M3 Jack x 1 (for wired remote control)
USB type-B (USB connector) x 1*5
Molded plastic
650 × 349 × 815 mm (25.6" × 13.7" × 32.1")
Approximately 46.5 kg (102.5 lbs)
51 dB (lamp: Standard mode), 49 dB (lamp: Eco1, Eco2 mode)
Operating temperature: 5°C– 40°C (less than 1,800 m above sea level), 5°C– 30°C (between 1,800 m and 2,700 m above sea level),
operating humidity: 20%–80% (no condensation)
Power cord × 1, fixing bracket for power cord × 1, wireless/wired remote control unit, batteries (R03/AAA type × 2),
VGA cable × 1, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software, Real Color Manager Pro.),
lens attachment × 1, lens safety clamp × 2, light block plate × 3, lens spacer × 1, rock band × 3
1.2 – 1.5:1
Fixed-focus lens
ET-ELW06
ET-MD16SD1
BNC × 5 (RGB/YPBPR/YCBCR × 1), shared with VIDEO IN (BNC × 1) (composite video)
Projection distance (L)
ET-ELS02
ET-ELS03
815 (32-1/8)
Optional accessories
ET-LAE16
Bracket assembly
ET-PKE16B
ET-RFE16
*6 This product is used together with an optional bracket assembly (sold separately).
Projection distance
Upper edge of projected image
H
L
Projected image
L
H
*1 The values given for the recommended lamp replacement cycles are maximum.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 The ET-ELW06 is equipped with only vertical optical axis shift.
*4 Compliant with VESA CVT-RB.
*5 This port is for use by service personnel only. The USB interface may not operate with all USB-compatible equipment.
Diagonal
image size
unit: mm (inch)
349 (13-3/4)
Power supply
Power consumption
Panel size
Display method
LCD panel
Pixels
Pixel configuration
Lens
Lamp
Screen size (diagonal)
Brightness*2
Center-to-corner uniformity*2
Contrast*2
Resolution
HDMI/DVI-D
Lower edge of projected image
unit: meters (feet)
ET-ELM01
ET-ELT02
ET-ELT03
3.5 – 4.5:1
4.4 – 6.2:1
6.3 – 9.0:1
min.
max.
min.
max.
min.
max.
Height from the edge of screen to center of lens (H)
ET-ELW03 ET-ELW06 / ELW02 /
ELW04 / ELS03 /
ET-ELS02
ET-ELW03
0.8:1
ELM01 / ELT02 /ELT03
fixed
min.
max.
min.
max.
fixed
1.02 [40"] 0.91 (3.0) 1.17 (3.8) 1.07 (3.5) 1.42 (4.7) 1.15 (3.8) 1.56 (5.1) 1.48 (4.9) 1.99 (6.5) ― (―) ― (―) 2.87 (9.4) 3.69(12.1) 3.75(12.3) 5.11(16.8) 5.27(17.3) 7.58(24.9) 0.60 (2.0)
1.27 [50"] 1.16 (3.8) 1.49 (4.9) 1.36 (4.5) 1.80 (5.9) 1.47 (4.8) 1.98 (6.5) 1.90 (6.2) 2.54 (8.3) ― (―) ― (―) 3.56(11.7) 4.58(15.0) 4.63(15.2) 6.35(20.8) 6.50(21.3) 9.38(30.8) 0.77 (2.5)
1.52 [60"] 1.40 (4.6) 1.81 (5.9) 1.65 (5.4) 2.18 (7.2) 1.79 (5.9) 2.40 (7.9) 2.32 (7.6) 3.08(10.1) ― (―) ― (―) 4.26 (14) 5.48 (18) 5.51(18.1) 7.58(24.9) 7.73(25.4) 11.19(36.7) 0.94 (3.1)
1.78 [70"] 1.65 (5.4) 2.12 (7.0) 1.94 (6.4) 2.56 (8.4) 2.12 (7.0) 2.82 (9.3) 2.74 (9.0) 3.63(11.9) ― (―) ― (―) 4.95(16.2) 6.38(20.9) 6.39(21.0) 8.82(28.9) 8.96(29.4) 13.00(42.7) 1.10 (3.6)
2.03 [80"] 1.89 (6.2) 2.44
(8) 2.23 (7.3) 2.93 (9.6) 2.44
(8) 3.24(10.6) 3.16(10.4) 4.18(13.7) ― (―) ― (―) 5.65(18.5) 7.28(23.9) 7.27(23.9) 10.05(33.0) 10.19(33.4) 14.80(48.6) 1.27 (4.2)
2.29 [90"] 2.13 (7.0) 2.76 (9.1) 2.52 (8.3) 3.31(10.9) 2.76 (9.1) 3.66(12.0) 3.58(11.7) 4.72(15.5) ― (―) ― (―) 6.34(20.8) 8.18(26.8) 8.14(26.7) 11.28(37.0) 11.42(37.5) 16.61(54.5) 1.44 (4.7)
2.54[100"] 2.38 (7.8) 3.08(10.1) 2.81 (9.2) 3.69(12.1) 3.08(10.1) 4.08(13.4) 4.00(13.1) 5.27(17.3) 5.22(17.1) 7.10(23.3) 7.04(23.1) 9.08(29.8) 9.02(29.6) 12.52(41.1) 12.65(41.5) 18.42(60.4) 1.60 (5.2)
3.05[120"] 2.87 (9.4) 3.71(12.2) 3.39(11.1) 4.44(14.6) 3.72(12.2) 4.92(16.1) 4.85(15.9) 6.36(20.9) 6.30(20.7) 8.56(28.1) 8.42(27.6) 10.88(35.7) 10.78(35.4) 14.99(49.2) 15.11(49.6) 22.03(72.3) 1.94 (6.4)
3.81[150"] 3.6(11.8) 4.66(15.3) 4.26 (14) 5.57(18.3) 4.69(15.4) 6.18(20.3) 6.11 (20) 8.00(26.2) 7.92(26.0) 10.73(35.2) 10.51(34.5) 13.57(44.5) 13.42(44.0) 18.69(61.3) 18.80(61.7) 27.45(90.1) 2.44 (8.0)
5.08[200"] 4.82(15.8) 6.25(20.5) 5.71(18.7) 7.46(24.5) 6.29(20.6) 8.28(27.2) 8.21(26.9) 10.74(35.2) 10.61(34.8) 14.36(47.1) 13.98(45.9) 18.07(59.3) 17.82(58.5) 24.86(81.6) 24.94(81.8) 36.49(119.7) 3.27(10.7)
6.35[250"] 6.04(19.8) 7.83(25.7) 7.16(23.5) 9.35(30.7) 7.90(25.9) 10.38(34.1) 10.32(33.9) 13.47(44.2) 13.31(43.7) 18.00(59.1) 17.45(57.3) 22.56(74.0) 22.22(72.9) 31.03(101.8) 31.09(102.0) 45.52(149.3) 4.10(13.5)
7.62[300"] 7.26(23.8) 9.42(30.9) 8.61(28.2) 11.23(36.8) 9.51(31.2) 12.48(40.9) 12.42(40.7) 16.21(53.2) 16.00(52.5) 21.63(71.0) 20.92(68.6) 27.05(88.7) 26.62(87.3) 37.20(122.0) 37.24(122.2) 54.55(179.0) 4.94(16.2)
10.16[400"] 9.70(31.8) 12.59(41.3) 11.51(37.8) 15.00(49.2) 12.72(41.7) 16.68(54.7) 16.63(54.6) 21.68(71.1) 21.39(70.2) 28.89(94.8) 27.87(91.4) 36.04(118.2) 35.42(116.2) 49.54(162.5) 49.53(162.5) 72.62(238.3) 6.60(21.7)
12.70[500"] 12.13(39.8) 15.76(51.7) 14.41(47.3) 18.78(61.6) 15.94(52.3) 20.88(68.5) 20.84(68.4) 27.15(89.1) 26.79(87.9) 36.15(118.6) 34.81(114.2) 45.03(147.7) 44.22(145.1) 61.88 (203) 61.83(202.9) 90.69(297.5) 8.27(27.1)
15.24[600"] 14.57(47.8) 18.93(62.1) 17.30(56.8) 22.55(74.0) 19.15(62.8) 25.07(82.3) 25.05(82.2) 32.61 (107) 32.18(105.6) 43.41(142.4) 41.76 (137) 54.01(177.2) 53.02 (174) 74.22(243.5) 74.12(243.2) 108.76(356.8) 9.94(32.6)
NOTE ON USE
1This product must not be used in residential areas.
2This product may cause interference if used in residential areas. Such use must be avoided unless the user
takes special measures to reduce electromagnetic emissions to prevent interference to the reception of
radio and television broadcasts.
3Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke.
Doing so may result in fire, malfunction or electric shock.
4The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may
break, emitting a large sound, or fail to illuminate, due to impact or extended use.
5The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions:
•Never place objects on top of the projector while it is in operation.
•Make sure there is an unobstructed space of 500 mm (19-11 / 16 in) or more around the projector’s
exhaust openings.
•Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.
When stacking projector units, be sure to provide the amount of space indicated between them. These
space requirements also apply to installation where only one projector unit is operating at one time and
the other unit is used as a backup.
•If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must be
between 0°C (32°F) and 40°C (104°F). Also, make sure the projector’s intake and exhaust openings are not
blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake.
6The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
•The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on
individual lamp characteristics and usage conditions.
•The brightness of the lamp will gradually decrease with use.
7Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of
faulty lamp performance.
For more information about Panasonic projectors
http://panasonic.net/avc/projector
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations. The
projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information,
please consult the dealer from whom you are purchasing the product. Also, the throw ratios shown are the values for an 80inch image size (measured diagonally). The throw ratio varies depending on the diagonal image size. The PJLink trademark
is an application trademark in Japan, the United States, and other countries and regions or registered trademarks. All other
trademarks are the property of their respective trademark owners. Projection images simulated.
© 2011 Panasonic Corporation. All rights reserved.
All information included here is valid as of August 2011.
PT-EX16KG1 Printed in Japan.