advertisement
Networks
Company Overview
Since 1988, IMC Networks has set a standard as a “Made in the USA” manufacturer of a variety of specialized and industrialgrade fiber media conversion and fiber optic access solutions for Enterprise,
Government and Service Providers’ LANs,
First-Mile FTTx networks and Metropolitan
Area Networks, delivering 24 years of excellence in product quality, customer satisfaction and value.
With over one million products shipped,
IMC Networks’ products are deployed where copper to fiber, dual to single-fiber or
Multi-mode to Single-mode fiber conversions are required, carrying both managed and unmanaged media converter modules that support 10, 100, 10/100, 10/100/1000 and
Gigabit Ethernet, VDSL, T1/E1 and DS3/
E3 technologies. IMC Networks’ products are sold through a worldwide network of authorized distributors, resellers and OEM partners in more than 50 countries. IMC
Networks is ISO 9001:2008 registered; all products are RoHS compliant, Made in the USA, and carry a 6 year comprehensive warranty (SFP products offer a 1 year warranty).
• Managed Converters come in a wide range of SNMP-managable devices and a variety of protocols including 10/100/1000
Ethernet and T1/E1/J1 range extenders
• Power over Ethernet (PoE) technology allows flexibility in Wireless Access Point and IP camera applications
• Fiber-to-Fiber Mode Converters connect fiber network segments with dissimilar fiber types
• SFPs allow network operators to upgrade fiber types and speeds, extending the lifespan of legacy hardware
• Chassis options support various FTTx and media conversion modules, ranging from single-slot, standalone unmanaged devices to 20-slot, fully-managed rackmounted chassis
• SNMP iView of charge
2 Element Management
System (EMS) software is available Free
Why IMC Networks?
• Twenty-four years of innovation
• Full U.S. operations; manufacturing, marketing & technical support
• Worldwide sales distribution with offices in:
Product Overview
– Foothill Ranch, CA (West, Worldwide)
IMC Networks’ media conversion solutions are available in a variety of form factors and configurations that allow networks to perform better, faster and more reliably; from low-cost standalone units to rack-mountable modules designed for high-density applications. The products in this catalog are organized by the following sections:
• Optical Access/FTTx products allow fiber network operators to deliver nextgeneration Managed Ethernet, high-speed
Internet, Private line and Transparent LAN services
• Unmanaged Converters allow customers to convert multiple protocols and interfaces, such as 10/100Base-T copper to
100Base-Fx fiber
– Clearwater, Florida (East, Latin America)
– Aarschot/Brussels, Belgium (EMEA)
• Free worldwide technical support
• FCS Complimentary Fiber Consulting
Services
• ISO 9001:2008 product quality management
• RoHS environmental compliance
• MEF certification
• EU Reach certification
• 6-year comprehensive warranty
(SFP products are 1-year)
• Made in the USA (except SFP products)
Industry First Innovations
• 16-bit Ethernet LAN card (05/88)
• Ethernet over non-Ethernet cable (07/88)
• Modular repeaters (10/89)
• Media conversion products (09/91)
• Modular hubs (04/95)
• Manageable media converters (09/96)
• Gigabit Ethernet copper-to-fiber converters
(04/00)
• Multi-media, multi-protocol chassis platform w/ SNMP (11/00)
• USB-powered miniature media converters
(12/02)
• Compact Industrial Ethernet optical demarcation device (08/06)
IMC Networks Free Software iView
2
/ iView
2
v 3.0
IMC’s free all-in-one network management applcation is offered in both a web and PC-based version. iView 2 gives users the ability to remotly view and manage all supported IMC Networks
SNMP manageable and “iMcV” modules via an intuitive GUI.
UMA
The Unifi ed Management Agent allows users to manage up to 41 devices installed in an iMediaChassis with a single IP address from a central location. Additionally, UMA allows users to administer fi rmware upgrades over multiple devices.
SNMP Management Module
The SNMP Management Module allows users to utilize the full SNMP functionality of all manageable
“iMcV” modules when installed concurrently in an iMediaChassis. Employing managed media converters in your network allows for troubleshooting at remote sites without the initial need for a costly truck roll.
See page 45 for ordering information
©2012 IMC Networks. All rights reserved. The information in this document is accurate as of its publication date and is subject to change without notice. Brands or product names may be trademarks and are the property of their respective companies. For the latest product information, visit www.imcnetworks.com.
www.imcnetworks.com
Table Of Contents
Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick Product Search Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Access/FTTx Products
IE-MultiWay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
AccessEtherLinX/4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Giga-AccessEtherLinX-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 iMcV-FiberLinX-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 iMcV-Giga-FiberLinX-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
IE-MiniFiberLinX-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
IE-MiniFiberLinX-II/Telco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
IE-MiniFiberLinX-II/LastGasp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Unmanaged Media Conversion Products
McBasic Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PSE-McBasic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
AccessConverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Mc Modules for MediaConverter Series . . . . . . . . . . . . . . . . . . . . . . . . . . 21
McPC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
McPC-MediaLinX Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
McPC-Gigabit Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
WDM Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Managed Media Conversion Products
iMcV-PIM, iMcV-LIM Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 iMcV-Gigabit Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Converting the Metric System
Equation to calculate meters and kilometers to miles.
1 m = 0.000621 Miles
(m x 0.000621 = Miles)
100 m =
550 m =
2 km =
15 km =
20 km =
40 km =
60 km =
70 km =
80 km =
120 km =
1 km = 0.621 Miles
(km x 0.621 = Miles)
Metric Conversion Table
0.0621Miles
0.341 Miles
1.242 Miles
9.315 Miles
12.42 Miles
24.84 Miles
37.26 Miles
43.47 Miles
49.68 Miles
74.52 Miles
IE-iMcV-VDSL2-LANextender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Mode Converters
iMcV-Fiber Mode Converters (iMcV-S2MM, M2MM, S2SM). . . . . . . . . . . 39
IE-ModeConverter SFP/SFP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
IE-iMcV-ModeConverter SFP/SFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
IE SFP Products
IE-SFP 100 to 155 Mbps (OC-3) Modules . . . . . . . . . . . . . . . . . . . . . . . . . 42
IE-SFP 1250 Mbps/1.25 Gbps (OC-24) Modules. . . . . . . . . . . . . . . . . . . . 43
IE-SFP 2.4 Gbps (OC-48) and 10 Gbps (OC-192) Modules . . . . . . . . . . . 44
Chassis Products
Managed Chassis and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Unmanaged Chassis and Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Networks
Product Overview
About Media Converters
manage and monitor the entire access network and end points without a visit to the customer’s location, reducing operational costs while providing capabilities not commonly found on other Ethernet media converters.
media converters that offer increased security.
IMC Networks’ fiber mode converters allow network managers to connect multi and singlemode network segments together, simplifying network planning.
Media converters connect different types of cabling media, extending transmission distances well beyond the capabilities of twisted pair wiring, and allowing for integration of new fiber-based equipment into non-fiber legacy networks.
Conversely, media converters also allow operators to preserve their investment in legacy copper-port hardware as more and more legacy copper networks are updated with fiber.
Whether providing Fiber-to-the-Home, Business or Premises, IMC Networks’ solutions support distances up to 100 km, and offer single-strand and CWDM optical interfaces. The products work seamlessly with other manufacturers’ products to maximize service providers’ investment in the existing equipment and fiber network infrastructure.
IMC Networks proudly provides special pricing and free ground shipping under GSA contract
#GS-35F-0491J. Visit http www.imcnetworks.
com/Government/ for more information.
IMC Networks’ media conversion solutions are available in a variety of form factors and configurations, from low-cost standalone units to rack-mountable modules designed for high-density applications.
About FTTx & Optical Access
Optical Access and FTTx solutions from IMC
Networks integrate traditional media converters with advanced remote management and configuration capabilities, allowing service providers to deliver next-generation, managed, high-speed
Internet, Ethernet Private Line and Transparent
LAN services to businesses, multi-dwelling units (MDUs) and residential customers. FTTx solutions are also used by Enterprise customers when managed media converters are needed on campus networks.
IMC Networks’ solutions are available in a wide variety of form factors and configurations, ranging from standalone units (CPE), to rack-mountable modules designed for high-density applications.
Solutions Overview
Enterprise LAN/WAN
Fiber optic media converters make a crucial connection between different cabling types and speeds. Media converters are the most flexible, cost-effective solution for extending network distances and integrating fiber optic cabling into twisted pair structured cabling systems. They increase performance of active equipment and also accelerate legacy network segments to
Gigabit speeds.
With solutions ranging from simple, standalone converters to intelligent, SNMP managed systems, IMC Networks provides the industry’s widest variety of media and mode converters.
These solutions support most Ethernet speeds, cabling types and distances, fitting a wide range of enterprise networking applications including:
• Bringing Fiber-to-the-Desk
• Bridging LAN segments with dissimilar fiber types
• Using PoE (Power over Ethernet) to bring power to network devices such as Wireless
Access Points and IP Cameras
Why Fiber Optics?
Fiber is most commonly associated with long distance connections. Today, however, it is rapidly gaining market share in LAN topologies, once considered the domain of copper cabling.
Fiber offers many advantages:
• It has exceptional bandwidth, and can carry multiple signals concurrently
• It is immune to electromagnetic interference
• It has no electromagnetic emissions, making it resistant to eavesdropping
• It is lightweight
• It is virtually "future proof"
Service Providers Government
IMC Networks’ fiber optic media conversion and optical access solutions can make provisioning of fiber-based services less complex and more affordable.
The U.S. Government has historically been a pioneer in networking research, development and Internet technology. IMC Networks proudly supports federal, state and local governments with fiber solutions that combine high security with greater bandwidth.
Modular, chassis-based Central Office (CO) solutions accommodate a variety of managed
Ethernet, VDSL, T1/E1/J1, DS3/E3 fiber extension and FTTx applications from the same platform.
Intelligent Customer Premises Equipment (CPE) solutions allow service providers to control,
IMC Networks is a preferred vendor to government organizations worldwide. In addition to standalone and PC card media converters, IMC Networks also has an extensive line of SNMP-managed
1
Quick Product Search
Matrix
IE
Products Featured in
This Catalog
Protocol Ports Format SNMP Page
IE-MultiWay
AccessEtherLinX **
Giga-AccessEtherLinX-II iMcV-FiberLinX-II ** iMcV-Giga-FiberLinX-II **
IE-MiniFiberLinX-II **
IE-MiniFiberLinX-II/Telco
IE-MiniFiberLinX-II/LastGasp
MiniMc, MiniMc SFP **
•
•
•
•
MiniMc-Gigabit
IE-MiniMc, IE-Giga-MiniMc **
IE-MiniMc/Telco, IE-MiniMc/Telco-LastGasp
PoE and PoE+ Giga-McBasic
PD-Switch
McBasic Series
PSE-McBasic
AccessConverter **
McPIM 10 Mbps, McLIM 100 Mbps**, McLIM
Switching 10/100 Mbps, McGigabit 1000 Mbps
McPC 100 Mbps, McPC 10/100**
McPC Switching
McPC-Gigabit
WDM
IE-MuxDemux/4
IE-iMcV-2xLIM iMcV-PIM 10 Mbps, iMcV-LIM 100 Mbps iMcV-LIM 10/100 Mbps iMcV-Gigabit, IE-iMcV-Gigabit
IE-iMcV-MediaLinX, iMcV-MediaLinX**, iMcV-Giga-MediaLinX **
Term
NEW!
iMcV-DS3/E3/STS
• • • • • • • • • • •
•
•
•
•
•
• IE-iMcV-E1-Mux/4 + Ethernet (Enhanced)
IE-iMcV-T1-Mux/4 + Ethernet iMcV-Switch
IE-iMcV-MultiWay iMcV-PSE-MidSpan
IE-iMcV-VDSL2 LANextender iMcV-S2MM, S2SM, M2MM
•
•
•
•
IE-ModeConverter SFP/SFP
IE-iMcV-ModeConverter SFP/SFP
IE-SFP
Chassis & Accessories
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• • •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8
9
10
11
12
13
6
7
4
5
18
19
20
21
14
15
16
17
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42-44
45-46
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
Networks
Product Features
The following icons highlight features that are found in IMC Networks’ products.
The icons can be found on the top of each product page.
3
Auto Cross
Auto
Negotiation
CWDM
Config
Control
Fiber Alert
LINK
LINK X
FIBER
LOS
X
Industrial
Ethernet
Last Gasp
X
LFPT
X
X
Link Loss
X X
LOS
Autocross
Autocross allows for automatic detection of the correct MDI / MDIX configuration on the copper ports (RJ-45), eliminating the need to specify different cables (crossover or straight-through) and thus eliminating another step in troubleshooting.
Auto Negotiation
Auto Negotiation allows devices to automatically assign the most efficient line speed (10/100/1000 Mbps) and mode (Full-Duplex or Half-Duplex) for a particular network segment between two devices.
Coarse Wave Division Multiplexing
Coarse Wave Division Multiplexing (CWDM) uses uncooled lasers to combine multiple wavelengths (four, eight or 16; from 1310 nm to
1610 nm) onto a single fiber, using an ITU standard 20 nm spacing between the wavelengths. Adding wavelengths to the same fiber increases capacity, making
CWDM technology a sound choice for large networks such as Gigabit Ethernet and Fibre Channel-based Metropolitan Area Networks (MAN).
Config Control
Configuration Control has been implemented on select iMcV-Modules. Its main function is to assist the end-user by retaining the latest configuration regardless of how the initial configuration was setup, whether through DIP Switch settings or the SNMP Management Module’s configuration.
FiberAlert
FiberAlert minimizes the problems associated with the loss of one strand of fiber.
If a strand is unavailable, the device at the receiver end notes the loss of link.
The device will then stop transmitting on the fiber until a signal or link pulse is received. The result is that the link LED on BOTH sides of the fiber connection will go out indicating a fault somewhere in the fiber loop.
Industrial Ethernet / Equipment (IE)
IE stands for “Industrial Ethernet” and refers to IMC Networks’ designation for products that have been designed to operate in a wider temperature range rather than the typical 0°C to +40°C. IMC Networks’ “IE” products contain additional features designed for industrial applications, such as multiple powering options and DIN clips. IE temperature ranges vary, so check the product specifications for more details.
Managed
Q-in-Q
T
TT
1550
ON
BOARD
PoE
Single
1310
Strand
Fiber
1550
1310
IE products require third party enclosures for outdoor installations or protection from moisture, dust and other harsh environmental factors. External protection is also required for lightning or other serious power surges.
Last Gasp
The Last Gasp feature available on select IMC Networks modules allows for one final health status message to be sent when remote modules lose power, notifying network operators that a field visit is necessary.
Link Fault Pass-Through (LFPT)
LFPT (Link Fault Pass-Through) – A feature that allows a segment of a network, divided by a media converter, to act as if it was one physical piece of media. It does this by passing a link fault from one side of the media converter to the other.
If a link is lost on one side of the media converter the converter forces a link fault on the other.
LinkLoss
LinkLoss is a troubleshooting feature that works on either the twisted pair port
(TP/TX) or the fiber port (FO/FX) of devices which have at least one of each port type. When a fault occurs on one segment of a conversion, LinkLoss detects the fault and passes this information to the other segment. For example, if a media converter is not receiving a fiber link, FO/FX LinkLoss disables the transmitter on the media converter’s twisted pair port. This results in a loss of link on the remote twisted pair device.
802.1p
UMA
1 IP
Address
T
V-LAN
Tagging
T
T
802.3ah
Managed Products
IMC Networks offers several products that support SNMP management, allowing operators to proactively manage and monitor their devices from a remote location.
On Board SNMP Management
IMC Networks offers “intelligent” products with on board SNMP management, allowing operators to proactively manage and monitor the devices without an additional management controller.
Power Over Ethernet (PoE)
Power Over Ethernet (PoE) is a standards based (IEEE 802.3af) method of delivering power over twisted-pair network cables (RJ-45) along with data, thus eliminating the need for a separate run for a power source. There are two types of PoE devices: the Power Sourcing Equipment (PSE) and the
Powered Device (PD). The PSE supplies power to the PD.
Q-in-Q
Q-in-Q, also known as Extra-Tagging, is an IEEE 802.1Q compliant method of assigning a VLAN tag to already tagged network traffic. Q-in-Q enables the transmission of data across multiple VLANs without altering the original data, providing safer and more secure transmission of data packets over the network.
RoHS
With environmental protection becoming more important across the globe,
IMC Networks has taken a leadership position by designing products that are free of lead, cadmium and 6 other toxic materials. This makes the products of IMC Networks compliant with the Restriction of Hazardous Substances in
Electrical and Electronic Equipment Directive (RoHS), passed into law by the European Union. All part numbers starting with “8” are RoHS compliant.
Single-Strand Fiber
Single-Strand Fiber technology allows two wavelengths to share one fiber strand. Full-Duplex data travels on different wavelengths (1310 nm and
1550 nm) which effectively doubles the capacity of installed fiber. Since single-strand fiber products use optics that transmit and receive on two different wavelengths, single-strand fiber products must be deployed in pairs.
The pair can consist of two IMC or third-party products that conform to the same IMC standard.
Traffic Prioritization
Traffic Prioritization (IEEE 802.1p) provides advanced packet management of network traffic by assigning a priority ID to each packet, insuring that highpriority traffic (such as VoIP) receives the network resources and bandwidth necessary for high Quality of Service (QoS).
Unified Management Agent (UMA)
The Unified Management Agent (UMA) is a proprietary system developed by IMC Networks to utilize a separate management domain on the network in order to keep management and other data separate. UMA is an IP-less management method which simplifies management of supported devices by reducing the number of IP addresses.
VLAN Tagging
VLAN Tagging (IEEE 802.1Q) involves assigning identification information to data packets on a network to insure that data is efficiently and correctly routed between devices. The VLAN tag includes an EtherType, priority bits and a VLAN ID that allows each packet to remain secure and intact while being routed across multiple networks.
Administration and Maintenance
IEEE 802.3ah OAM includes features associated with Discovery, Link
Monitoring, Events, Remote Loopback and Performance Monitoring and
Reporting. IMC Networks’ implementation of 802.3ah supports both Active and Passive operational modes on all ports and software upgrades are Free to IMC Networks clients.
Auto
Negotiation
Managed Auto Cross Fiber Alert
LINK LINK X
FIBER
LOS
X
Link Loss
X X
LOS
V-LAN
Tagging
T
T
T
Last Gasp
IE-MultiWay
The Most Compact, Versatile, Managed CPE
Ethernet FTTx Device on the Market.
Providing Solutions For:
• Managed Fiber Termination
• Fiber Drop & Insert
• Fiber Repeater
• Mode Conversion
• Dual Independent Media Conversion
Product Overview
The IE-MultiWay is a value-based, Carrier-class Ethernet, FTTx solution that is ideal for use as a CPE device at the customer’s network edge as well as in a fiber infrastructure. The IE-MultiWay comes standard with two SFP uplink ports for the providers’ network connection and two
10/100/1000Base-T copper ports.
There are four distinct DIP Switch selectable configurations that the IE-MultiWay supports. Among them are a 1+1 Uplink Protection
Switch, a 4-Port Switch, and a Dual Copper to Fiber SFP Media/Mode
Converter (two gigabit fiber media converters in one).
As a 4-port device, it can be employed with fiber redundancy (with or without 1+1 uplink protection) and status monitoring with management on all ports via OAM, for mission-critical applications. It also can be deployed as a dual 10/100/1000 Mbps copper to fiber media converter and be utilized as two separate converters.
Features
• Dual-independent copper to fiber SFP media converter(s)
• Fiber
• SFP to SFP mode converter with copper drops
(Re-amplify, Re-shape, Re-time)
Switch
• 1+1 uplink protection (< 50 mSec)
• Supports
• Supports Jumbo Frames (up to 10240 bytes)
• -48V DC terminal for Telco applications
• Supports active and passive IEEE 802.3ah
• OAM (Operation, Administration &
Management) on all ports
DHCP
• Generates SNMP TRAPs based on events
• Discovery, Link Monitoring, Performance
Monitoring and Remote Loopback
• Remote firmware upgradeable
• RS-232 CLI (Command Line Interface) console port
• User-friendly 10/100/1000 Mbps Auto
Negotiation technology
• Selectable (High/Low) SFP control via DIP
Switch
• Auto detect for 100 or 1000 optical SFPs
• Auto negotiate speed and flow control for
10/100/1000 copper SFP with SGMII
• Supports fixed speed 1 Gbps full-duplex copper
SFPs
• Optical SFPs support DDMI status through CLI
• Compatible with standard MSA compliant SFP transceivers
• Extended temperature functionality, up to -40° to +85° C
• Powering options can be combined for AC/DC redundancy
10/100/1000 Mbps Ethernet
Media/Mode Converter
Connectors:
RJ-45, SFP
Regulatory Approvals:
• FCC Class A (Using 48V Telco-type power)
• FCC Class B (Using all other power options)
• UL/cUL, CE
Operating Temperature:
+14° to +122° F (-10° to +50° C) w/ Franmar AC Wall Adapter;
-40° to +185° F (-40° to +85° C) w/ DC Configuration;
Storage Temperature:
-49° to +185° F (-45° to +85° C);
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.86”H x 3.66”W x 3.88”D (2.2 x 9.38 x 9.94 cm)
Supply Voltage:
5 to 24 VDC (Barrel)
48 VDC Telco (Terminal)
Power Information:*
Min: 3.15W (1 optic SFP [1 Gbps], 1 Tx [100 Mbps])
Max: 7.0W (2 Cu SFP [1 Gbps], 2 Tx [1 Gbps])
* Power consumption is based on SFP types
Shipping Weight:
1.0 lbs (0.45 kg)
The IE-MultiWay supports 10/100/1000 Mbps and 1 Gbps copper and
100 Mbps and 1 Gbps optical SFP modules, to provide greater flexibility in the network environment. The hot-swappable nature of the SFPs and the numerous fiber modes and types that are available allow for easy configuration and future upgrading as network demands evolve. For added control, DDMI is supported via the CLI for optical SFPs.
Local management is achieved through the serial port, which allows users to launch a serial session through the CLI. Commands such as interface statistics, RMON statistics, and OAM status and control are a few of the accessible features.
Application Example
Conversion of copper to fiber optic cabling for distance extension from the multi-tenant’s dwelling to the ISP’s central office is commonly used today. Data services are then distributed through fiber optic cabling via copper to Clients living in the building so Clients are able to gain access to the internet at greater speeds. Using
IMC Networks’ IE-MultiWay dual media converter option, ISP’s can support two independent fiberto-copper lines using a single device, saving equipment cost while providing the Clients with independent higher speed data services.
Ordering Information
858-11121 IE-MultiWay, 2TX/2SFP w/ AC to DC Power Adapter
Varies
854-11121 IE-MultiWay, 2TX/2SFP w/o AC to DC Power Adapter
Varies
Available Accessories
806-39753 IE-Power/5V, AC to DC (DIN Rail) Power Adapter
(-20° to +70° C)
806-39105 DIN Rail Clip
806-39638 Double-USB Power Cable, 36”
825-39951 Serial Cable, MiniJack to DB9 (female)
895-39229 Wall Mount Bracket
Wall Mount Bracket
4
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
LINK LINK X
FIBER
LOS
X
Link Loss
X X
LOS
V-LAN
Tagging
T
T
T
10/100 Mbps Copper (TX) to 100 Mbps
Fiber (FX) Fast Ethernet
AccessEtherLinX/4
Managed multi-port optical demarcation devices combining media conversion with advanced capabilities.
Product Overview
The AccessEtherLinX/4 enables service providers to offer differentiated, bandwidth-scalable data or “Transparent LAN” services to multi-tenant buildings and business customers. Residing at the customer premises, the AccessEtherLinX/4 provides a VLANbased, Layer 2 entry point to the last mile fiber network, trunking, differentiating and separating customer traffic.
The AccessEtherLinX/4 features SNMP management, bandwidth control, VLAN tagging, traffic prioritization and IGMP multicast pruning/snooping with support for 4 customer ports. It provides an ideal and cost effective solution for delivering Ethernet-based services to business customers.
Choose from a variety of brackets and rackmounting options for easy installation.
Features
• Fiber or copper uplink options
• Independent RJ-45 ports for flexible configurations
• Easy to configure and manage with GUI-based iView²
• Can
• Includes DHCP and TFTP client
• Includes SNMP V2c
• Read/write IEEE 802.1Q VLAN-tags
• Bi-directional
• IEEE 802.3x compliant for Flow Control
• QoS – IEEE 802.1p-based packet prioritization
• Includes loopback test modes
• MAC
• Includes LinkLoss and FiberAlert
• Selective
• Half
Advertising
• Remote management and upgrades
• Supports IGMP multicast pruning/snooping
Ordering Information
852-13120 AccessEtherLinX, TX/4 + TX, 100 m
852-13121 AccessEtherLinX, TX/4 + FX-MM1300-ST, 5 km
852-13122 AccessEtherLinX, TX/4 + FX-MM1300-SC, 5 km
852-13123 AccessEtherLinX, TX/4 + FX-SM1310/PLUS-ST, 40 km
852-13124 AccessEtherLinX, TX/4 + FX-SM1310/PLUS-SC, 40 km
852-13125 AccessEtherLinX, TX/4 + FX-SM1310/LONG-ST, 80 km
852-13126 AccessEtherLinX, TX/4 + FX-SM1310/LONG-SC, 80 km
852-13127 AccessEtherLinX, TX/4 + FX-SM1550/LONG-SC, 80 km
852-13130 AccessEtherLinX, TX/4 + FX-SM1550/XLONG-SC,100 km
Single-Strand Fiber
852-10133 AccessEtherLinX, TX/4 + SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
852-10134 AccessEtherLinX, TX/4 + SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
852-10135 AccessEtherLinX, TX/4 + SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
852-10136 AccessEtherLinX, TX/4 + SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
852-10137 AccessEtherLinX, TX/4 + SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
852-10138 AccessEtherLinX, TX/4 + SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber and CWDM fiber wavelengths
• AutoCross for automatic MDI-II/MDI-X switching
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class B, UL/cUL, CSA, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
1.5” H x 4.75” W x 7.25” D
(3.18 cm x 12.07 cm x 18.42 cm)
Power Rating
100-240V AC, 50/60Hz, 1A
Shipping Weight:
1.6 lbs. (0.6 kg)
CWDM versions available,
See website for details
Available Accessories
895-39226
895-39949
Rackmount bracket
Rackmount shelf
Rackmount bracket
Rackmount shelf
Application Example
For residential and commercial fiber services, install the AccessEtherLinX/4 inside the customer premises to provide a demarcation point between the customer and service provider networks.
5
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Managed Auto Cross Fiber Alert
LINK LINK X
FIBER
LOS
X
Link Loss
X X
LOS
V-LAN
Tagging
T
T
T
10/100/1000 Mbps Copper (TX) to
1000 Mbps Fiber (FX) Fast Ethernet
Giga-AccessEtherLinX-II
Features
A Managed Optical Demarcation device offering advanced “Multi-Tenant” capabilities unique to multi-port Ethernet-based CPE.
• 802.1Q VLAN-tags on a per-port basis, based on DiffServ or PRI values
• QoS – 802.1p-based packet prioritization
• Allows configuration via GUI, Telnet or serial port
• Remote management and upgrades
• Per-port bi-directional bandwidth control
• Supports IGMP multicast pruning
• RMON
• Lowers the cost of provisioning fiber services
• SNMP-Manageable
• Supports remote “IP-Less” management when connected to a iMcV-Giga-FiberLinX-II
• All management traffic remains isolated from the remote LAN
• IEEE 802.1Q VLAN and 802.1p compliant
• VLAN-tagging and Q-in-Q (double-tagging) segregates customer traffic
• Up and running in less than five minutes
• Includes
• TRAP notification capability
• SNMP V1 and V2c compatible
Product Overview
The Giga-AccessEtherLinX-II enables service providers to offer differentiated “Transparent LAN” services to multi-tenant building and business customers without the need for costly remote routers. Residing at the customer premises, the Giga-AccessEtherLinX-II provides a
VLAN-based, Layer 2 entry point to the last mile fiber network to support trunking, differentiating and separating customer traffic. Featuring
SNMP management with per-port 802.1Q VLAN, 802.1p QoS, traffic prioritization, bandwidth control and multicast pruning/snooping (using
IGMP v1, v2), the Giga-AccessEtherLinX-II is perfect for a wide range of
Fiber-to-the-Home, Fiber-to-the-Curb and Fiber-to-the-Business (FTTx) services, and is an ideal solution for delivering Ethernet-based services to customers quickly and cost effectively. Designed with a small footprint, the Giga-AccessEtherLinX-II facilitates easy installation inside the premises. It features four 10/100/1000 twisted pair Ethernet downlink ports (for connecting users/ LANs), with either a 1000Base-FX fiber or
SFP uplink port, and is powered from an internal AC or DC power supply.
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber and CWDM fiber wavelengths
• AutoCross for automatic MDI-II/MDI-X switching
The Giga-AccessEtherLinX-II includes per-port bandwidth control and is 802.1Q VLAN compatible.
Connectors:
RJ-45, SC and SFP
Regulatory Approvals:
FCC Class B, UL/cUL, CSA, CE
Operating Temperature:
+32° to 122° F (0° to +50° C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
The Giga-AccessEtherLinX-II accepts traffic containing VLAN tags on the Uplink port and directs that traffic to the twisted pair downlink ports based on the VLAN ID. In addition to assigning 802.1Q VLAN-tags on a per-port basis, users can also “Qualify” the different VLAN TAGS to assign based on the DiffServ or PRI value of the incoming frame. Traffic priority for each port is supported with hi/low prioritization queues. The
Giga-AccessEtherLinX-II includes per port bi-directional bandwidth control, and supports IGMP multicast pruning which ensures only the necessary amount of IP multicast packets are bridged.
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
1.64” H x 5.64” W x8.95” D
(4.2 cm x 14.3 cm x 22.7 cm)
Power Requirements
100-240V AC, 50/60Hz, 0.5/0.25A for AC
48V DC, 0.5A for DC
Shipping Weight:
1.6 lbs. (0.6 kg)
Application Example
For residential and commercial fiber services, install the Giga-AccessEtherLinX-II inside the customer premises to provide a bridge between the customer and Service Provider networks, over a point-to-point fiber uplink. Each remote drop can be assigned two unique VLAN tags based on DiffServ or PRI values for easy routing through the network.
Ordering Information
Giga-AccessEtherLinX-II AC Version
852-10302 Giga-AccessEtherLinX-II, TX/4 + SFP (requires one
SFP/1250 module), Varies
852-10303 Giga-AccessEtherLinX-II, TX/4 + SX-MM850-SC,220/550 m
852-10304 Giga-AccessEtherLinX-II, TX/4 + LX-SM1310-SC, 15 km
852-10305 Giga-AccessEtherLinX-II, TX/4 + LX-SM1310/PLUS-SC,
40 km
852-10306 Giga-AccessEtherLinX-II, TX/4 + LX-SM1550/LONG-SC,
80 km
852-10307 Giga-AccessEtherLinX-II, TX/4 + LX-SM1550/XLONG-SC,
100 km
Single-Strand Fiber
852-10310 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1310-SC
(1310xmt/1550rcv), 15 km
852-10311 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1550-SC
(1550xmt/1310rcv), 15 km
852-10312 Giga-AccessEtherLinX-II, TX/4 + SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km
852-10313 Giga-AccessEtherLinX-II, TX/4 + SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km
852-10314 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
852-10315 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
852-10316 Giga-AccessEtherLinX-II, TX/4 + SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km
852-10317 Giga-AccessEtherLinX-II, TX/4 + SSBX-SM1490/PLUS-SC
(1490xmt/1310rcv), 30 km
852-10318 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km
852-10319 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km
Giga-AccessEtherLinX-II DC Version
852-32302 Giga-AccessEtherLinX-II, TX/4 + SFP (requires one
SFP/1250 module), Varies
852-32303 Giga-AccessEtherLinX-II, TX/4 + SX-MM850-SC, 220/550 m
852-32304 Giga-AccessEtherLinX-II, TX/4 + LX-SM1310-SC, 15 km
852-32305 Giga-AccessEtherLinX-II, TX/4 + LX-SM1310/PLUS-SC,
40 km
852-32306 Giga-AccessEtherLinX-II, TX/4 + LX-SM1550/LONG-SC,
80 km
852-32307 Giga-AccessEtherLinX-II, TX/4 + LX-SM1550/XLONG-SC,
100 km
Single-Strand Fiber
852-32310 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1310-SC
(1310xmt/1550rcv), 15 km
852-32311 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1550-SC
(1550xmt/1310rcv), 15 km
852-32312 Giga-AccessEtherLinX-II, TX/4 + SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km
852-32313 Giga-AccessEtherLinX-II, TX/4 + SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km
852-32314 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
852-32315 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
852-32316 Giga-AccessEtherLinX-II, TX/4 + SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km
852-32317 Giga-AccessEtherLinX-II, TX/4 + SSBX-SM1490/PLUS-SC
(1490xmt/1310rcv), 30 km
852-32318 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km
852-32319 Giga-AccessEtherLinX-II, TX/4 + SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km
CWDM versions available,
See website for details
Available Accessories
See page 5
6
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
LINK LINK X
FIBER
LOS
X
Link Loss
X X
LOS
Q-in-Q
T
TT
T
V-LAN
Tagging
T
T
UMA
1 IP
Address
Last Gasp
10/100 Mbps Auto Negotiating Copper (TX),
100 Mbps Fiber (FX) Ethernet (MAN, CityNet) iMcV-FiberLinX-II
Optical demarcation module enabling delivery of transparent LAN services over fiber with integrated media conversion, carrier-grade remote management and line provisioning capabilities.
Features
• Transparency feature allows VLAN/non-VLAN traffic on the same port
• Provides priority
• Set bi-directional bandwidth configure
• Last Gasp SNMP trap
• Easy to configure and manage with GUI-based iView²
RJ-45
• Manage/monitor fiber traffic
RMON
• SNMP V1 and V2c compatible
• Supports the Unified Management Agent (UMA)
• Receive
• Q-in-Q/Extra-Tagging
• Supports OAM
Administration & Management)
Product Overview
The iMcV-FiberLinX-II solution connects two remote networks over fiber optics and allows administrators to observe both the end-points and the fiber link between them, as single management entities and not as separate elements. Host management traffic is not visible to the remote or customer network nor is access to the customer network required, guaranteeing end-to-end data integrity.
The iMcV-FiberLinX-II can be configured remotely, can alert administrators to any potential problems on the long-haul fiber run, can provide vital information on link condition and can report data traffic statistics.
The iMcV-FiberLinX-II end points and fiber link can be managed as a single entity, allowing remote configuration and fault alerts to network administrators. As a copper-to-fiber media converter, it allows low-cost copper switches to connect to the fiber line. Offering unparalleled flexibility, the iMcV-FiberLinX-II supports multiple fiber types including multi-mode and single-mode as well as single-strand fiber, doubling the capacity of installed fiber. Coarse Wavelength Division Multiplexing
(CWDM) functionality is also an option.
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber, CWDM fiber and SFP
Connectors:
RJ-45, ST, SC and SFP
Regulatory Approvals:
FCC Class A, UL/cUL, CE, CSA, CB
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
0° to +160°F (-20° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Power Consumption:
.850mA at 3.3V DC
Shipping Weight:
0.30 lbs (0.11 kg)
Ordering Information iMcV-FiberLinX-II, SFP port(s)
856-14500
856-14501 iMcV-FiberLinX-II, TX/SFP, SFP Variable
(requires one SFP/155-ED Module) iMcV-FiberLinX-II, SFP/SFP, SFP Variable
(requires two SFP/155-ED Module) iMcV-FiberLinX-II, TX/TX
856-14010 iMcV-FiberLinX-II, TX/TX, 100 m iMcV-FiberLinX-II, TX/FX
856-14011
856-14012
856-14015
856-14016
856-14017 iMcV-FiberLinX-II, TX/FX-MM1300-ST, 5 km iMcV-FiberLinX-II, TX/FX-MM1300-SC, 5 km iMcV-FiberLinX-II, TX/FX-SM1310/PLUS-ST, 40 km iMcV-FiberLinX-II, TX/FX-SM1310/PLUS-SC, 40 km iMcV-FiberLinX-II, TX/FX-SM1310/LONG-ST, 80 km
856-14018
856-14021
856-14039 iMcV-FiberLinX-II, TX/FX-SM1310/LONG-SC, 80 km iMcV-FiberLinX-II, TX/FX-SM1550/LONG-SC, 80 km
856-14022 iMcV-FiberLinX-II, TX/FX-SM1550/XLONG-SC, 100 km
Single-Strand Fiber iMcV-FiberLinX-II, TX/SSFX-MM1310-SC
(1310xmt/1550rcv), 2 km
856-14040
856-14043
856-14044
856-14045
856-14046
856-14047 iMcV-FiberLinX-II, TX/SSFX-MM1550-SC
(1550xmt/1310rcv), 2 km iMcV-FiberLinX-II, TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km iMcV-FiberLinX-II, TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km iMcV-FiberLinX-II, TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km iMcV-FiberLinX-II, TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km iMcV-FiberLinX-II, TX/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
856-14048 iMcV-FiberLinX-II, TX/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
CWDM versions available,
See website for details
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
Application Example
When used in pairs, a module configured as a Host resides at the head-end while another module, configured as a Remote, installs at the remote customer location (typically on the network edge where the customer network meets the service provider infrastructure).
Using SNMP, the iMcV-FiberLinX-II solution monitors the entire link and ensures data integrity while remaining isolated and completely transparent to the customer LAN.
7
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Managed Auto Cross Fiber Alert
LINK LINK X
FIBER
LOS
X
Link Loss
X X
LOS
Q-in-Q
T
TT
T
V-LAN
Tagging
T
T
iMcV-Giga-FiberLinX-II
UMA
1 IP
Address
802.3ah
10/100/1000 Mbps Auto Negotiating Copper
(TX), 1.25 Gbps (SX/LX) Gigabit Ethernet
An optical demarcation unit enabling delivery of transparent LAN services while providing carrier-grade management and line provisioning capabilities.
Product Overview
Service providers who provide Transparent LAN services must be able to remotely manage their customer premises equipment while keeping management and customer data traffic separated. The iMcV-
Giga-FiberLinX-II provisions point-to-point fiber optic connections and provides a unique management tool to the entire link between two locations.
Features
• VLAN-tagging and Q-in-Q (Extra Tagging) segregates customer traffic
• IEEE 802.1Q VLAN and 802.1p compliant
• Transparency feature allows VLAN/non-VLAN traffic on the same port
• Provides configure
• Easy to configure and manage with GUI-based iView²
• Includes
• Manage/monitor
• Includes statistics
• SNMP V1 and V2c compatible
• Supports the Unified Management Agent (UMA)
• Supports 802.3ah OAM (Operation,
Administration & Management)
Field-proven worldwide since 1999, the iMcV-Giga-FiberLinX-II system is ideal for Optical Ethernet, FTTx and campus area network applications.
The iMcV-Giga-FiberLinX-II solution connects two remote networks over fiber optics and allows administrators to observe both the end-points, and the fiber link between them, as single management entities and not as separate elements. Host management traffic is not visible to the remote or customer network nor is access to the customer network required, guaranteeing end-to-end data integrity. The iMcV-Giga-
FiberLinX-II allows for remote configuration and alerts administrators to any potential problems on the long-haul fiber run. It also functions as a copper-to-fiber media converter, allowing deployment of lower cost copper switches at both ends of the fiber connection.
Offering unparalleled flexibility, iMcV-Giga-FiberLinX-II supports multiple fiber types as well as single-strand fiber which can effectively double the capacity of installed fiber. The iMcV-Giga-FiberLinX-II module installs in a standard IMC Networks iMediaChassis series or MediaChassis/2.
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber, CWDM fiber and SFP
Connectors:
RJ-45, ST, SC and SFP
Regulatory Approvals:
FCC Class A, UL/cUL, CE, CSA, CB
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
Double-wide module
Power Consumption:
850mA at 3.6V DC
Shipping Weight:
0.8 lbs (0.36 kg)
Ordering Information iMcV-Giga-FiberLinX-II, SFP port(s)
856-14760
856-14761 iMcV-Giga-FiberLinX-II, TX/SFP (requires one
SFP/1250-ED Module) iMcV-Giga-FiberLinX-II, SFP/SFP (requires two
SFP/1250-ED Module) iMcV-Giga-FiberLinX-II, SX/LX
856-14869
856-14874
856-14890
856-14891
856-14875
856-14876
856-14892
856-14893
856-14877
856-14878
856-14879
856-14880 iMcV-Giga-FiberLinX-II, TX/SX-MM850-SC,
220/550 m
856-14870
856-14871
856-14872
856-14881 iMcV-Giga-FiberLinX-II, TX/LX-SM1310-SC, 15 km iMcV-Giga-FiberLinX-II, TX/LX-SM1310/PLUS-SC,
40 km iMcV-Giga-FiberLinX-II, TX/LX-SM1550/LONG-SC,
80 km iMcV-Giga-FiberLinX-II, TX/LX-SM1550/XLONG-SC,
100 km
Single-Strand Fiber
856-14873 iMcV-Giga-FiberLinX-II, TX/SSLX-SM1310-SC
(1310xmt/1550rcv), 15 km iMcV-Giga-FiberLinX-II, TX/SSLX-SM1550-SC
(1550xmt/1310rcv), 15 km iMcV-Giga-FiberLinX-II, TX/SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km iMcV-Giga-FiberLinX-II, TX/SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km iMcV-Giga-FiberLinX-II, TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km iMcV-Giga-FiberLinX-II, TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km iMcV-Giga-FiberLinX-II, TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km iMcV-Giga-FiberLinX-II, TX/SSBX-SM1490/PLUS-SC
(1490xmt/1310rcv), 30 km iMcV-Giga-FiberLinX-II, TX/SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km iMcV-Giga-FiberLinX-II, TX/SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km iMcV-Giga-FiberLinX-II, TX/SSLX-SM1490/XLONG-
SC, (1490xmt/1550rcv), 80 km iMcV-Giga-FiberLinX-II, TX/SSLX-SM1550/XLONG-
SC, (1550xmt/1490rcv), 80 km
Available Accessories
825-39950 Serial Cable
CWDM versions available,
See website for details
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
Application Example
When used in pairs, a module configured as a Host resides at the head-end while another module, configured as a Remote, installs at the remote customer location
(typically on the network edge where the customer network meets the service provider infrastructure).
Using SNMP, the iMcV-Giga-FiberLinX-II solution monitors the entire link and ensures data integrity while remaining isolated and completely transparent to the customer LAN.
8
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
X LINK LINK
X
FIBER
LOS
Link Loss
X X
LOS
Q-in-Q
T
TT
T
V-LAN
Tagging
T
T
Industrial
Ethernet
UMA
1 IP
Address
PoE
10/100 Mbps Auto Negotiating Copper (TX),
100 Mbps Fiber (FX) Ethernet (MAN, CityNet)
IE-MiniFiberLinX-II
Features
Compact fiber optic CPE for industrial-grade delivery over fiber, with media conversion, carrier grade management and line provisioning capabilities.
• Power options: AC, DC and 802.3af Power over
Ethernet (PoE)
• Preserves complete end-to-end fiber connection integrity
• Includes bi-directional bandwidth control
• Read/write IEEE 802.1Q VLAN-tags
• QoS: IEEE 802.1p-based packet prioritization
(2 queues [high/low] with 8 levels of priority)
• Layer 2 packet switching, store and forward operation
• Forwarding rate: 14,880pps for 10 Mbps;
148,800pps for 100 Mbps;
• MTU: Supports over-sized packets up to 1536 bytes
• SNMP V1 and V2c compatible
Product Overview
The compact IE-MiniFiberLinX-II provides point-to-point fiber optic connections with a unique management tool to monitor the entire link between two locations. IE-MiniFiberLinX-II CPE for fiber optic networks allows service providers to deliver “triple-play” voice, video and data services to customer premises.
As a copper-to-fiber converter, the IE-MiniFiberLinX-II supports multiple fiber types including multi-mode, single-mode, single-strand fiber (SSF), and Course Wavelength Division Multiplexing (CWDM) functionality to increase the capacity of existing fiber. It allows for remote configuration, provides vital alerts to network administrators, and can manage the CPE and fiber link as a single entity.
Equipped with one 100 Mbps fiber data port, one 10/100 twisted pair port for data and management, as well as an auxiliary port designed to function as a serial port (when used with the included adapter), the
IE-MiniFiberLinX-II also offers multiple powering options: AC power (with included adapter), DC (through a 4-terminal power block), as well as
Power over Ethernet, acting as a Powered Device (PD) to draw power when connected to 802.3af compliant Power Sourcing Equipment (PSE).
Combining copper-to-fiber conversion, extended temperature performance, plug-and-play operation, miniature size and multiple power options, the IE-MiniFiberLinX-II is one of the most versatile fiber optic CPE devices available.
Application Example
• IEEE 802.3x Flow Control
• Includes DHCP and TFTP clients
• Supports the Unified Management Agent (UMA)
• IEEE 802.3 10Base-T twisted pair
• IEEE 802.3u 100Base-TX twisted pair
• IEEE 802.3u 100Base-FX or SX fiber
• Supports passive 802.3ah OAM (Operation,
Administration & Management)
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber, CWDM fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class A, UL/cUL, CE, CSA, CB
Operating Temperature:
-4° to +167°F (-20° to +75°C) DC Configuration
+32° to +122°F (0° to +50°C) with AC wall adapter
Storage Temperature:
-49° to +185°F (-45° to +85°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.85”H x 1.83”W x 3.38”D (2.15 x 4.64 x 8.58 cm)
Power Rating:
AC Wall adapter: 100/240 ±10% VAC input, 50/60 Hz 5V
DC output at 10W, 2.0A
DC Input: 7 to 50V DC, 1A-0.1A
Shipping Weight:
0.30 lbs (0.11 kg)
Ordering Information
With AC Power Supply
856-19717
856-19718
856-19722
856-19723
856-19724
IE-MiniFiberLinX-II, TP-TX/FX-MM850-ST, 2 km
IE-MiniFiberLinX-II, TP-TX/FX-MM850-SC, 2 km
IE-MiniFiberLinX-II, TP-TX/FX-MM1300-ST, 5 km
IE-MiniFiberLinX-II, TP-TX/FX-MM1300-SC, 5 km
IE-MiniFiberLinX-II, TP-TX/FX-SM1310/PLUS-ST,
40 km
856-19725
856-19726
856-19727
856-19730
856-19728
Single-Strand Fiber
856-19750 IE-MiniFiberLinX-II, TP-TX/SSFX-MM1310-SC
(1310xmt/1550rcv), 2 km
856-19751
856-19752
856-19753
IE-MiniFiberLinX-II, TP-TX/SSFX-MM1550-SC
(1550xmt/1310rcv), 2 km
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
856-19754
IE-MiniFiberLinX-II, TP-TX/FX-SM1310/PLUS-SC,
40 km
IE-MiniFiberLinX-II, TP-TX/FX-SM1310/LONG-ST,
80 km
IE-MiniFiberLinX-II, TP-TX/FX-SM1310/LONG-SC,
80 km
IE-MiniFiberLinX-II, TP-TX/FX-SM1550/LONG-SC,
80 km
IE-MiniFiberLinX-II, TP-TX/FX-SM1550/XLONG-SC,
100 km
856-19755
856-19756
856-19757
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
Without AC Power Supply
856-19740
856-19741
856-19732
856-19733
856-19734
856-19735
856-19736
856-19737
IE-MiniFiberLinX-II Module, TP-TX/FX-MM850-ST,
2 km
IE-MiniFiberLinX-II Module, TP-TX/FX-MM850-SC,
2 km
IE-MiniFiberLinX-II Module, TP-TX/FX-MM1300-ST,
2 km
IE-MiniFiberLinX-II Module, TP-TX/FX-MM1300-SC,
2 km
IE-MiniFiberLinX-II Module, TP-TX/FX-SM1310/
PLUS-ST, 30 km
IE-MiniFiberLinX-II Module, TP-TX/FX-SM1310/
PLUS-SC, 30 km
IE-MiniFiberLinX-II Module, TP-TX/FX-SM1310/
LONG-ST, 80 km
IE-MiniFiberLinX-II Module, TP-TX/FX-SM1310/
LONG-SC, 80 km
Single-Strand Fiber
856-19760 IE-MiniFiberLinX-II Module, TP-TX/SSFX-MM1310-
SC (1310xmt/1550rcv), 2 km
856-19761
856-19762
856-19763
856-19764
856-19765
856-19766
856-19767
IE-MiniFiberLinX-II Module, TP-TX/SSFX-MM1550-
SC (1550xmt/1310rcv), 2 km
IE-MiniFiberLinX-II Module, TP-TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
IE-MiniFiberLinX-II Module, TP-TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
IE-MiniFiberLinX-II Module, TP-TX/SSFX-SM1310/
PLUS-SC (1310xmt/1550rcv), 40 km
IE-MiniFiberLinX-II Module, TP-TX/SSFX-SM1550/
PLUS-SC (1550xmt/1310rcv), 40 km
IE-MiniFiberLinX-II Module, TP-TX/SSFX-SM1310/
LONG-SC (1310xmt/1550rcv), 60 km
IE-MiniFiberLinX-II Module, TP-TX/SSFX-SM1550/
LONG-SC (1550xmt/1310rcv), 60 km
CWDM versions available,
See website for details
9
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Managed Auto Cross Fiber Alert
LINK LINK X
FIBER
LOS
X
Link Loss
X X
LOS
Q-in-Q
T
TT
T
V-LAN
Tagging
T
T
Industrial
Ethernet
UMA
1 IP
Address
PoE
10/100 Mbps Auto Negotiating Copper (TX),
100 Mbps Fiber (FX) Ethernet (MAN, CityNet)
IE-MiniFiberLinX-II/Telco
Compact fiber optic CPE for industrial-grade delivery over fiber, with media conversion, carrier grade management and line provisioning capabilities.
Product Overview
The compact IE-MiniFiberLinX-II/Telco is one of the most versatile fiber optic NID devices available on the market today. It provides point-to-point fiber optic connections with a unique management tool to monitor the entire link between two locations. IE-MiniFiberLinX-II/Telco was designed to work with -48 VDC power that is compliant with the
Bellcore GR-499 specification, supporting the minimum and maximum transient voltages, typically required by transport equipment used in
Telco environments. Other key features include; carrier grade remote
SNMP management, extra tagging using Q-in-Q, and PoE (Power over
Ethernet).
As a copper-to-fiber converter, the IE-MiniFiberLinX-II/Telco supports multiple fiber types including multimode, single-mode, single-strand fiber (SSF), and Course Wavelength Division Multiplexing (CWDM) functionality to increase the capacity of existing fiber. It allows for remote configuration, provides vital alerts to network administrators, and can manage the CPE and fiber link as a single entity.
Equipped with one 100 Mbps fiber data port, one 10/100 twisted pair port for data and management, as well as an auxiliary port designed to function as a serial port (when used with the included adapter), the IE-MiniFiberLinX-II/Telco also offers multiple powering options: AC power (with included adapter), DC (through a 4-terminal power block), as well as Power over Ethernet, acting as a Powered Device (PD) to draw power when connected to 802.3af compliant Power Sourcing
Equipment (PSE).
Application Example
Features
• Power options: AC, DC and 802.3af Power over
Ethernet (PoE)
• Preserves complete end-to-end fiber connection integrity
• Includes bi-directional bandwidth control
• Read/write IEEE 802.1Q VLAN-tags
• QoS: IEEE 802.1p-based packet prioritization
(2 queues [high/low] with 8 levels of priority)
• Layer 2 packet switching, store and forward operation
• Forwarding rate: 14,880pps for 10 Mbps;
148,800pps for 100 Mbps;
• MTU: Supports over-sized packets up to 1536 bytes
• SNMP V1 and V2c compatible via
• IEEE 802.3x Flow Control
• Includes DHCP and TFTP clients
• Supports the Unified Management Agent (UMA)
• IEEE 802.3 10Base-T twisted pair
• IEEE 802.3u 100Base-TX twisted pair
• IEEE 802.3u 100Base-FX or SX fiber
• Supports passive 802.3ah OAM (Operation,
Administration & Management)
Ordering Information
* Modular versions without AC adapter change the fi rst Part
Number to 854 (i.e. 856-17620 becomes 854-17620).
CWDM versions available,
See website for details
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber, CWDM fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class A, UL/cUL, CE, CSA, CB
Operating Temperature:
-49° to +185° F (-45° to +85° C) Telco DC Configuration
+32° to +122°F (0° to +50°C) with AC wall adapter
Storage Temperature:
-49° to +185°F (-45° to +85°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.85”H x 1.83”W x 3.38”D (2.15 x 4.64 x 8.58 cm)
Power Rating:
AC Wall adapter: 100/240 ±10% VAC input, 50/60 Hz 5V
DC output at 10W, 2.0A
DC Input: 12 to 48 VDC *, 1 to .02A,
* Telco compatible 48 VDC allows for an absolute maximum voltage of 56.5 VDC
Shipping Weight:
0.30 lbs (0.11 kg)
IE-MiniFiberLinX-II/Telco
856-17620
856-17621
856-17622
856-17623
856-17624
856-17625
856-17626
856-17627
856-17628
856-17629
856-17630
856-17631
856-17632
IE-MiniFiberLinX-II/Telco, TP-TX/FX-MM850-ST,
(-20°C to +70°C), 2 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-MM850-SC,
(-20°C to +70°C), 2 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-MM1300-ST,
5 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-MM1300-SC,
5 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-SM1310-ST,
10 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-SM1310-SC,
10 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-SM1310/PLUS-
ST, 30 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-SM1310/PLUS-
SC, 30 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-SM1310/LONG-
ST, 80 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-SM1310/LONG-
SC, 80 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-SM1310/
XLONG-SC, 100 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-SM1550/LONG-
SC, 80 km
IE-MiniFiberLinX-II/Telco, TP-TX/FX-SM1550/
XLONG-SC, 100 km
Single-Strand Fiber
856-17640 IE-MiniFiberLinX-II/Telco, TP-TX/SSFX-MM1310-SC
(1310xmt/1550rcv), 2 km
856-17641 IE-MiniFiberLinX-II/Telco, TP-TX/SSFX-MM1550-SC
(1550xmt/1310rcv), 2 km
856-17642
856-17643
856-17644
856-17645
856-17646
856-17647
IE-MiniFiberLinX-II/Telco, TP-TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
IE-MiniFiberLinX-II/Telco, TP-TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
IE-MiniFiberLinX-II/Telco, TP-TX/SSFX-SM1310/
PLUS-SC (1310xmt/1550rcv), 40 km
IE-MiniFiberLinX-II/Telco, TP-TX/SSFX-SM1550/
PLUS-SC (1550xmt/1310rcv), 40 km
IE-MiniFiberLinX-II/Telco, TP-TX/SSFX-SM1310/
LONG-SC (1310xmt/1550rcv), 60 km
IE-MiniFiberLinX-II/Telco, TP-TX/SSFX-SM1550/
LONG-SC (1550xmt/1310rcv), 60 km
10
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
LINK
LINK X
FIBER
LOS
X
Link Loss
X X
LOS
Q-in-Q
T
TT
T
V-LAN
Tagging
T
T
Industrial
Ethernet
UMA
1 IP
Address
PoE
10/100 Mbps Auto Negotiating Copper (TX),
100 Mbps Fiber (FX) Ethernet (MAN, CityNet)
IE-MiniFiberLinX-II/LastGasp
Equipped with one 100 Mbps fiber data port, one 10/100 twisted pair port for data and management, as well as an auxiliary port designed to function as a serial port (when used with the included adapter), the
IE-MiniFiberLinX-II/LastGasp also offers multiple powering options: AC power (with included adapter), DC (through a 4-terminal power block), as well as Power over Ethernet, acting as a Powered Device (PD) to draw power when connected to 802.3af compliant Power Sourcing
Equipment (PSE).
Application Example
Features
Compact fiber optic CPE for industrial-grade delivery over fiber, with media conversion, carrier grade management and line provisioning capabilities.
Product Overview
The compact IE-MiniFiberLinX-II/LastGasp is one of the most versatile fiber optic NID devices available on the market today. It provides point-to-point fiber optic connections with a unique management tool to monitor the entire link between two locations. IE-MiniFiberLinX-II/
Last Gasp was designed to work with -48 VDC power that is compliant with the Bellcore GR-499 specification, supporting the minimum and maximum transient voltages, typically required by transport equipment used in Telco environments. Additionally, the product offers Last Gasp, a Trap notification feature that identifies when the power lines are down or of a possible power supply failure. Other key features include; carrier grade remote SNMP management, extra tagging using Q-in-Q, and PoE
(Power over Ethernet).
troubleshooting
• Power options: AC, DC and 802.3af Power over
Ethernet (PoE)
• Preserves complete end-to-end fiber connection integrity
• Includes bi-directional bandwidth control
• Read/write IEEE 802.1Q VLAN-tags
• QoS: IEEE 802.1p-based packet prioritization
(2 queues [high/low] with 8 levels of priority)
• Layer 2 packet switching, store and forward operation
• Forwarding rate: 14,880pps for 10 Mbps;
148,800pps for 100 Mbps;
• MTU: Supports over-sized packets up to 1536 bytes
• SNMP V1 and V2c compatible
• Managed Telnet
• IEEE 802.3x Flow Control
• Includes DHCP and TFTP clients
• Supports the Unified Management Agent (UMA)
• IEEE 802.3 10Base-T twisted pair
• IEEE 802.3u 100Base-TX twisted pair
• IEEE 802.3u 100Base-FX or SX fiber
• Supports passive 802.3ah OAM (Operation,
Administration & Management)
Ordering Information
As a copper-to-fiber converter, the IE-MiniFiberLinX-II/LastGasp supports multiple fiber types including multimode, single-mode, singlestrand fiber (SSF), and Course Wavelength Division Multiplexing
(CWDM) functionality to increase the capacity of existing fiber. It allows for remote configuration, provides vital alerts to network administrators, and can manage the CPE and fiber link as a single entity.
* Modular versions without AC adapter change the fi rst Part
Number to 854 (i.e. 856-17720 becomes 854-17720).
CWDM versions available,
See website for details
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber, CWDM fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class A, UL/cUL, CE, CSA, CB
Operating Temperature:
-49° to +185° F (-45° to +85° C) Telco DC Configuration
+32° to +122°F (0° to +50°C) with AC wall adapter
Storage Temperature:
-49° to +185°F (-45° to +85°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.85”H x 1.83”W x 3.38”D (2.15 x 4.64 x 8.58 cm)
Power Rating:
AC Wall adapter: 100/240 ±10% VAC input, 50/60 Hz
5V DC output at 10W, 2.0A
DC Input: 12 to 48 VDC *, 1 to .02A,
* Telco compatible 48 VDC allows for an absolute maximum voltage of 56.5 VDC
Shipping Weight:
0.30 lbs (0.11 kg)
IE-MiniFiberLinX-II/LastGasp
856-17720
856-17721
856-17722
856-17723
856-17724
856-17725
856-17726
856-17727
856-17728
856-17729
856-17730
856-17731
856-17732
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-MM850-ST,
(-20°C to +70°C), 2 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-MM850-SC,
(-20°C to +70°C), 2 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-MM1300-ST,
5 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-MM1300-SC,
5 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310-ST,
10 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310-SC,
10 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310/
PLUS-ST, 30 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310/
PLUS-SC, 30 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310/
LONG-ST, 80 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310/
LONG-SC, 80 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1310/
XLONG-SC, 100 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1550/
LONG-SC, 80 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/FX-SM1550/
XLONG-SC, 100 km
Single-Strand Fiber
856-17740 IE-MiniFiberLinX-II/LastGasp, TP-TX/SSFX-MM1310-SC
(1310xmt/1550rcv), 2 km
856-17741
856-17742
856-17743
856-17744
856-17745
856-17746
856-17747
IE-MiniFiberLinX-II/LastGasp, TP-TX/SSFX-MM1550-SC
(1550xmt/1310rcv), 2 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/SSFX-SM1310/
PLUS-SC (1310xmt/1550rcv), 40 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/SSFX-SM1550/
PLUS-SC (1550xmt/1310rcv), 40 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/SSFX-SM1310/
LONG-SC (1310xmt/1550rcv), 60 km
IE-MiniFiberLinX-II/LastGasp, TP-TX/SSFX-SM1550/
LONG-SC (1550xmt/1310rcv), 60 km
11
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Auto Cross Industrial
Ethernet
IE-PowerTray/18 Product Features
10/100 Mbps Miniature Media
Converters
MiniMc, MiniMc SFP and IE-PowerTray/18-AC
Features
The smallest, most reliable and most cost effective switching and Gigabit-only media converters in the industry.
Product Overview
Media conversion is the most cost-effective solution for extending the productive life of legacy wiring plants and equipment while allowing implementation of new technologies. Media conversion’s greatest benefits are flexibility and cost savings.
Perfect for a variety of applications
• Low Cost media converter
• Standalone converter includes country specific, high-reliability power adapter or use converter with USB-power cord (10/100 Mbps only)
Space saving alternative
• Standalone unit has small, rugged enclosure with compact, external power supply
• 18 connections in the 1.5U high
IE-PowerTray/18-AC rackmountable enclosure
• Can be ordered without AC adapter for
IE-PowerTray/18-AC installation
All versions include:
• Auto-Cross automatic selection between crossover or straight-through cable
LEDs
Measuring less than 3.5 inches deep and 2 inches wide, the MiniMc is the industry’s smallest media converter with both data connections on the same side of the unit, and at a fraction of the cost of other alternatives. Plug-and-play operation with a variety of model types and powering options make the MiniMc series easy and convenient to use.
MiniMc SFP includes:
• One SFP fiber port
• One 10/100 Base-TX twisted pair port that auto-senses the connected device’s rate and duplex mode (Half-Duplex/Full-
Duplex)
MiniMc includes:
• One 100 Mbps FDX fiber port
• One 10/100 Base-TX twisted pair port that auto-senses the connected device’s rate and duplex mode (Half-Duplex/Full-
Duplex)
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST, SC and SFP(only on MiniMc SFP version)
Regulatory Approvals:
FCC Class B, UL/cUL, CE, CSA
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.83”H x 1.80”W x 3.35”D (2.11 x 4.57 x 8.51 cm)
Power Rating:
AC Wall adapter: 100/240 ±10% VAC input, 50/60 Hz 5V
DC output at 10W, 2.0A
Shipping Weight:
0.7 lbs (0.3 kg)
Ordering Information
MiniMc: TP-TX/SFP
855-10619 MiniMc, TP-TX/SFP ( requires one IE-SFP/155 Module )
MiniMc: TP-TX/FX and TP-TX/SX
855-10620
855-10621
855-10622
855-10623
855-10624
855-10625
855-10626
MiniMc, TP-TX/FX-MM850-ST, 2 km
MiniMc, TP-TX/FX-MM850-SC, 2 km
MiniMc, TP-TX/FX-MM1300-ST, 5 km
MiniMc, TP-TX/FX-MM1300-SC, 5 km
MiniMc, TP-TX/FX-SM1310/PLUS-ST, 40 km
MiniMc, TP-TX/FX-SM1310/PLUS-SC, 40 km
MiniMc, TP-TX/FX-SM1310/LONG-ST, 80 km
855-10627
855-10641
MiniMc, TP-TX/FX-SM1310/LONG-SC, 80 km
MiniMc, TP-TX/FX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
855-10650
MiniMc, TP-TX/SSFX-MM1300-SC
(1300xmt/1550rcv), 2 km
855-10651
855-10652
855-10653
855-10654
855-10655
MiniMc, TP-TX/SSFX-MM1550-SC
(1550xmt/1300rcv), 2 km
MiniMc, TP-TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
MiniMc, TP-TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
MiniMc, TP-TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
MiniMc, TP-TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
855-10656
855-10657
MiniMc, TP-TX/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
MiniMc, TP-TX/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
Available Accessories
806-39720
806-00720-00
806-00720-01
806-00720-02
806-00720-03
806-39753
806-39628
806-39629
806-39638
806-39650
806-39105
895-39229
AC Power Adapter for MiniMc products
(10 watt, -10°C to +50°C), (FranMar)
Power Adapter Clip (USA), (FranMar)
Power Adapter Clip (UK), (FranMar)
Power Adapter Clip (Europe), (FranMar)
Power Adapter Clip
(Australia/New Zealand), (FranMar)
IE-Power/5V, AC to DC (DIN Rail) Power
Adapter (-20° to +70° C)
36” USB Power Cable (for MiniMc only)
12” USB Power Cable (for MiniMc only)
Double-USB Power Cable 36”
12” Barrel-Connector Power Cable
DIN Rail Clip
Wall Mount Bracket
Application Example
Connect up to 18 MiniMcs in an IE-PowerTray/18-AC and network with up to 18 remote locations using 1.5 rack units of space.
Physical Specifications
IE-PowerTray/18-AC
Regulatory Approvals:
FCC Class A, UL/cUL, CE, CSA
Operating Temperature:
-4° to +158°F (-20° to +70°C)
Storage Temperature:
-40° to +185°F (-40° to +85°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
2.30”H x 16.97”W x 9.25”D (5.80 x 43.10 x 23.5 cm)
Power Rating:
AC input Load: 100-240VAC ±10%, 50/60Hz, 1.5 - 0.75A
Shipping Weight:
10 lbs (4.5 kg)
IE-PowerTray/18-AC Chassis
850-13086
IE-PowerTray/18-AC (1.5U high, rackmountable enclosure)
CWDM versions available,
See website for details
* Modular versions without AC adapter change the fi rst Part
Number to 854 (i.e. 855-10620 becomes 854-10620).
12
Networks
Auto
Negotiation
Auto Cross
10/100/1000, 1000 Mbps
Miniature Media Converters
MiniMc-Gigabit, Giga-MiniMc, Giga-MiniMc SFP, Giga-MiniMc/LFPT
The smallest, most reliable and most cost effective switching and Gigabit-only media converters in the industry.
Product Overview
Media conversion is the most cost-effective solution for extending the productive life of legacy wiring plants and equipment while allowing implementation of new technologies. Media conversion’s greatest benefits are flexibility and cost savings.
Measuring less than 3.5 inches deep and 2 inches wide, the MiniMc is the industry’s smallest media converter with both data connections on the same side of the unit, and at a fraction of the cost of other alternatives. Plug-and-play operation with a variety of model types and powering options make the MiniMc series easy and convenient to use.
MiniMc-Gigabit includes:
• One 1000Base-SX or 1000Base-LX fiber port
• One 1000Base-T twisted pair port
Giga-MiniMc includes:
• One 1000Base-SX or 1000Base-LX fiber port
• One 10/100/1000 Mbps twisted pair port that auto-senses the connected device’s speed and duplex mode (Half-Duplex/Full-
Duplex)
Giga-MiniMc SFP includes:
• One 1000Base-SFP Slot (SFP Sold Seperatly)
• One 10/100/1000 Mbps twisted pair port that auto-senses the connected device’s speed and duplex mode (Half-Duplex/Full-
Duplex)
Giga-MiniMc LFPT includes:
• One 1000Base-SX or 1000Base-LX fiber port
• One 10/100/1000 Mbps twisted pair port that auto-senses the connected device’s speed and duplex mode (Half-Duplex/Full-
Duplex)
• Link Fault Pass-Through (LFPT)
Application Example
Connect up to 18 MiniMcs in an IE-PowerTray/18-AC and network with up to 18 remote locations using 1.5 rack units of space.
Features
Perfect for a variety of applications
• Low Cost media converter
• Standalone converter includes country specific, high-reliability power adapter or use converter with USB-power cord (10/100 Mbps only)
Space saving alternative
• Standalone unit has small, rugged enclosure with compact, external power supply
• 18 connections in the 1.5U high
IE-PowerTray/18-AC rackmountable enclosure
• Can be ordered without AC adapter for
IE-PowerTray/18-AC installation
All versions include:
• Auto-Cross automatic selection between crossover or straight-through cable
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST, SC and SFP(only on MiniMc SFP version)
Regulatory Approvals:
FCC Class B, UL/cUL, CE, CSA
Giga-MiniMc FCC Class A
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.83”H x 1.80”W x 3.35”D (2.11 x 4.57 x 8.51 cm)
Power Rating:
AC Wall adapter: 100/240 ±10% VAC input, 50/60 Hz 5V
DC output at 10W, 2.0A
Shipping Weight:
0.7 lbs (0.3 kg)
Giga-MiniMc/LFPT: TX/LX *
856-11700
Giga-MiniMc/LFPT TX/SFP,
(requires 1 IE-SFP/1250 module) , Various
Giga-MiniMc/LFPT: TX/SX *
856-11701
Giga-MiniMc/LFPT TX/SX-MM850-SC,
220/550 m
Available Accessories
See Page 12
Ordering Information
MiniMc-Gigabit: TX/SX and TX/LX *
855-10730 MiniMc-Gigabit, TX/SX-MM850-SC, 220/550 m
855-10731
855-10732
855-10733
MiniMc-Gigabit, TX/LX-SM1310-SC, 10 km
MiniMc-Gigabit, TX/LX-SM1310/PLUS-SC, 40 km
MiniMc-Gigabit, TX/LX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
855-10734
MiniMc-Gigabit, TX/SSLX-SM1310-SC
(1310xmt/1550rcv), 15 km
855-10735
855-10742
855-10743
855-10736
855-10737
855-10744
855-10745
855-10738
855-10739
MiniMc-Gigabit, TX/SSLX-SM1550-SC
(1550xmt/1310rcv), 15 km
MiniMc-Gigabit, TX/SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km
MiniMc-Gigabit, TX/SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km
MiniMc-Gigabit, TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
MiniMc-Gigabit, TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
MiniMc-Gigabit, TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km
MiniMc-Gigabit, TX/SSBX-SM1490/PLUS-SC
(1490xmt/1310rcv), 30 km
MiniMc-Gigabit, TX/SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km
MiniMc-Gigabit, TX/SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km
Giga-MiniMc: TX/SX and TX/LX *
856-10747
856-10735
856-10742
856-10743
856-10736
Giga-MiniMc, TX/SFP,
(requires 1 IE-SFP/1250 module) , Various
856-10730
856-10728
856-10731
856-10732
856-10733
856-10729
Giga-MiniMc, TX/SX-MM850-SC, 220/550 m
Giga-MiniMc, TX/LX-MM1300-SC, 2 km
Giga-MiniMc, TX/LX-SM1310-SC, 10 km
Giga-MiniMc, TX/LX-SM1310/PLUS-SC, 40 km
Giga-MiniMc, TX/LX-SM1550/LONG-SC, 80 km
Giga-MiniMc, TX/LX-SM1550/XLONG-SC, 100 km
Single-Strand Fiber
856-10734
Giga-MiniMc, TX/SSLX-SM1310-SC
(1310xmt/1550rcv), 15 km
Giga-MiniMc, TX/SSLX-SM1550-SC
(1550xmt/1310rcv), 15 km
Giga-MiniMc, TX/SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km
Giga-MiniMc, TX/SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km
Giga-MiniMc, TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
856-10737
856-10744
856-10745
856-10738
856-10739
Giga-MiniMc, TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
Giga-MiniMc, TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km
Giga-MiniMc, TX/SSBX-SM1490/PLUS-SC
(1490xmt/1310rcv), 30 km
Giga-MiniMc, TX/SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km
Giga-MiniMc, TX/SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km
* Giga-MiniMc Modular versions without AC adapter change the fi rst Part Number to 854 (i.e., 856-10747 becomes
854-10747).
Use with Chassis Platform
IE-PowerTray/18-AC, See Page 12
.
CWDM versions available,
See website for details
13
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Auto Cross Industrial
Ethernet
Industrial-Ethernet 10/100 and 10/100/1000
Switching Media Converters
IE-MiniMc & IE-Giga-MiniMc
Features
The fast-growing MiniMc series includes an
Industrial Ethernet model, allowing operation in extreme temperatures, with additional power and mounting options.
Product Overview
Equipped with all the features of the original — copper-to-fiber conversion, plug-and-play operation, miniature size and multiple power options — the IE-MiniMc also supports the IEEE 802.3af Power Over
Ethernet (PoE) standard to function as a powered device.
All versions include:
• Extended operating temperature of -25 to +85° C
• Auto-Cross automatic selection between crossover or straightthrough cable
LEDs
IE-MiniMc includes:
• One 100 Mbps Full-Duplex fiber port
• One 10/100 Base-TX twisted-pair port that auto-senses the connected device’s rate and duplex mode (Half-Duplex/Full-
Duplex)
• Twisted pair port also functions as a Powered Device port, supporting Power Over Ethernet (PoE)
IE-Giga-MiniMc includes:
• One 1000Base-SX or 1000Base-LX fiber port
• One 10/100/1000 Mbps twisted-pair port that auto-senses the connected device’s speed and duplex mode (Half-Duplex/Full-
Duplex)
Application Examples
DIN Rail clips are optinal with the IE MiniMc, allowing installation on a DIN rail. When installing multiple IE-MiniMc units on a DIN rail, one
DC input source can cascade from one DC block to the next, until reaching the maximum electrical current available.
Most cost-effective fiber converter available today
• Low cost, high flexibility — connects
10/100 Mbps copper to 100 Mbps fiber
• Install for use in extreme temperatures
Multiple powering options for a variety of applications
• Includes 4-terminal DC power block
• Includes country-specific, AC power adapter
(0° to +50°C)
• IE-MiniMc supports IEEE 802.3af Power over
Ethernet standard; draws power from power sourcing equipment (10/100 version only)
• Powering options can be combined for AC/DC redundancy
Space saving alternative
• Standalone unit has small, rugged enclosure with compact, external power supply
• 18 connections in the 1.5U high
IE-PowerTray/18-AC rackmountable enclosure
• Can be ordered without AC adapter for
IE-PowerTray/18-AC installation
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class A (using DC terminal power or Power Over
Ethernet (PoE)), Class B (using any DC jack optional), UL/ cUL, CE, CSA, CB
Operating Temperature:
-13° to +185°F (-25° to +85°C) Without AC Adapter
+14° to +122°F (-10° to +50°C) With AC Adapter
Storage Temperature:
-31° to +167°F (-35° to +75°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.83”H x 1.80”W x 3.35”D (2.11 x 4.57 x 8.51 cm)
Power Rating:
AC Wall adapter: 100/240 ±10% VAC input, 50/60 Hz
5V DC output at 10W, 2.0A
7-50V DC, 1A-0.1A
Shipping Weight:
0.7 lbs (0.3 kg)
Available Accessories
See Page 12
Use with Chassis Platform
IE-PowerTray/18-AC, See Page 12
Ordering Information
IE-MiniMc: TP-TX/FX
855-19720 IE-MiniMc, TP-TX/FX-MM850-ST, 2 km
855-19721
855-19722
855-19723
855-19724
855-19725
855-19726
855-19727
IE-MiniMc, TP-TX/FX-MM850-SC, 2 km
IE-MiniMc, TP-TX/FX-MM1300-ST, 5 km
IE-MiniMc, TP-TX/FX-MM1300-SC, 5 km
IE-MiniMc, TP-TX/FX-SM1310/PLUS-ST, 30 km
IE-MiniMc, TP-TX/FX-SM1310/PLUS-SC, 30 km
IE-MiniMc, TP-TX/FX-SM1310/LONG-ST, 80 km
IE-MiniMc, TP-TX/FX-SM1310/LONG-SC, 80 km
855-19730 IE-MiniMc, TP-TX/FX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
855-19750
IE-MiniMc, TP-TX/SSFX-MM1310-SC
(1310xmt/1550rcv), 2 km
855-19751
855-19752
855-19753
855-19754
855-19755
855-19756
855-19757
IE-MiniMc, TP-TX/SSFX-MM1550-SC
(1550xmt/1310rcv), 2 km
IE-MiniMc, TP-TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
IE-MiniMc, TP-TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
IE-MiniMc, TP-TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
IE-MiniMc, TP-TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
IE-MiniMc, TP-TX/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
IE-MiniMc, TP-TX/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
IE-Giga-MiniMc: TX/SX and TX/LX
856-18830
856-18831
856-18832
856-18833
856-18836
856-18825
856-18826
856-18837
IE-Giga-MiniMc, TX/SX-MM850-SC, 220/550 m
IE-Giga-MiniMc, TX/LX-SM1310-SC, 15 km
IE-Giga-MiniMc, TX/LX-SM1310/PLUS-SC, 40 km
IE-Giga-MiniMc, TX/LX-SM1550/LONG-SC, 80 km
856-18834
IE-Giga-MiniMc, TX/LX-SM1550/XLONG-SC,
100 km
Single-Strand Fiber
856-18835
IE-Giga-MiniMc, TX/SSLX-SM1310-SC
(1310xmt/1550rcv), 15 km
IE-Giga-MiniMc, TX/SSLX-SM1550-SC
(1550xmt/1310rcv), 15 km
IE-Giga-MiniMc, TX/SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km
IE-Giga-MiniMc, TX/SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km
IE-Giga-MiniMc, TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
856-18838
856-18827
856-18828
856-18839
856-18840
856-18841
856-18842
IE-Giga-MiniMc, TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
IE-Giga-MiniMc, TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km
IE-Giga-MiniMc, TX/SSBX-SM1490/PLUS-SC
(1490xmt/1310rcv), 30 km
IE-Giga-MiniMc, TX/SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km
IE-Giga-MiniMc, TX/SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km
IE-Giga-MiniMc, TX/SSLX-SM1490/XLONG-SC
(1490xmt/1550rcv), 80 km
IE-Giga-MiniMc, TX/SSLX-SM1550/XLONG-SC
(1550xmt/1490rcv), 80 km
* Modular versions without AC adapter change the fi rst Part
Number to 854 (i.e. 855-10620 becomes 854-10620).
CWDM versions available,
See website for details
14
Networks
Auto
Negotiation
Auto Cross Industrial
Ethernet
Industrial-Ethernet 10/100 and 10/100/1000
Switching Media Converters
IE-MiniMc/Telco & IE-MiniMc/Telco-LFPT
Features
The IE-MiniMc Series are Industrial Equipment
(IE) versions of the popular MiniMc Series, offering a wide range of transmission speeds, extended temperature, and multiple powering and mounting options.
Product Overview
Equipped with all the features of the original — copper-to-fiber conversion, plug-and-play operation, miniature size and multiple power options — the IE-MiniMc/Telco and IE-MiniMc/Telco LFPT also support the IEEE 802.3af Power Over Ethernet (PoE) standard to function as a powered device.
All versions include:
• Extended operating temperature of -25 to +85° C
• Auto-Cross automatic selection between crossover or straightthrough cable
IE-MiniMc/Telco includes:
• One 100 Mbps Full-Duplex fiber port
• One 10/100 Base-TX twisted-pair port that auto-senses the connected device’s rate and duplex mode (Half-Duplex/Full-
Duplex)
• Twisted pair port also functions as a Powered Device port, supporting Power Over Ethernet (PoE)
IE-MiniMc/Telco-LFPT includes:
• One 1000Base-SX or 1000Base-LX fiber port
• One 10/100/1000 Mbps twisted-pair port that auto-senses the connected device’s speed and duplex mode (Half-Duplex/Full-
Duplex)
• Link Fault Pass-Through(LFPT)
The most cost-effective fiber converter available
• Low cost and feature rich
• Value add industrial grade extended temperature performance
Versatile Solution
• Stand-alone unit with small, rugged metal enclosure with compact, external power supply
• Also available in Gigabit Switching models
(IE-Giga-MiniMc) 1
• -48 VDC terminal for Telco applications 2
• Available for a variety of fiber types and connectors, including single-strand fiber
More power options than other converters, for a variety of applications
• Includes country-specific AC power adapter
• Terminal DC power block (non-Telco) with extended voltage range (7 to 50 VDC)
• Installs in the IE-PowerTray/18-AC
• IEEE 802.3af Power Over Ethernet
• Powering options can be combined for
AC/DC redundancy power
Plug-and-Play Operation
Auto
• Auto-Cross feature for twisted pair connection on all converters
“Industrial Equipment” (IE) features for operation in difficult environments
• Extended temperature functionality, up to -25° to +85° C
• DIN Rail mountable (DIN clips sold separately)
Application Examples
Here we see one IE-MiniMc TELCO/LFPT installed at a Telco (powered by a -48 VDC office battery) and one installed at an
MTU. The LFPT function assists in identifying a break in the network if one were to occur.
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class A (using DC terminal power or Power Over
Ethernet (PoE)), Class B (using any DC jack optional), UL/ cUL, CE, CSA, CB
Operating Temperature:
-40° to +185°F (-40° to +85°C) Without AC Adapter
+14° to +122°F (-10° to +50°C) With AC Adapter
Storage Temperature:
-31° to +167°F (-35° to +75°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.83”H x 1.80”W x 3.35”D (2.11 x 4.57 x 8.51 cm)
Power Rating:
AC Wall adapter: 100/240 ±10% VAC input, 50/60 Hz
5V DC output at 10W, 2.0A
7-50V DC, 1A-0.1A
Shipping Weight:
0.7 lbs (0.3 kg)
Ordering Information
IE-MiniMc/LFPT: TP-TX/FX
855-19822 IE-MiniMc/LFPT, TP-TX/FX-MM850-SC, 2 km
855-19824
855-19830
855-19832
855-19833
IE-MiniMc/LFPT, TP-TX/FX-MM1300-SC, 5 km
IE-MiniMc/LFPT, TP-TX/FX-SM1310/PLUS-SC,
30 km
IE-MiniMc/LFPT, TP-TX/FX-SM1310/LONG-SC,
80 km
IE-MiniMc/LFPT, TP-TX/FX-SM1550/LONG-SC,
80 km
IE-MiniMc/Telco-LFPT: TP-TX/FX
855-19202
855-19204
855-19210
855-19212
855-19213
IE-MiniMc/Telco-LFPT, TX/FX-MM850-SC, 2 km
IE-MiniMc/Telco-LFPT, TX/FX-MM1300-SC, 5 km
IE-MiniMc/Telco-LFPT, TX/FX-SM1310/PLUS-SC,
30 km
IE-MiniMc/Telco-LFPT, TX/FX-SM1310/LONG-SC,
80 km
IE-MiniMc/Telco-LFPT, TX/FX-SM1550/LONG-SC,
80 km
15
Networks
Available Accessories
See Page 12
Use with Chassis Platform
IE-PowerTray/18-AC, See Page 12
* Modular versions without AC adapter change the fi rst Part
Number to 854 (i.e. 855-10620 becomes 854-10620).
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Auto Cross PoE
10/100/1000 Mbps
PoE & PoE+ Switching Media Converters
PoE and PoE+ Giga-MiniMc
Features
The PoE and PoE+ Giga-MiniMc is targeted for
Gigabit and 100 Mbps applications that require power over Ethernet to locations where PoE is needed to power the unit.
Product Overview
The PoE and PoE+Giga-MiniMc are low-cost, compact, multi-port media converters that support both PoE and PoE+ standards. Utilizing their flexibility and compact size, interior private network applications can further benefit from the ever-expanding versatility of the MiniMc product line.
Featuring 2 10/100/1000Base-T copper UTP ports and one SFP uplink port that supports either a copper or fiber SFP, the PoE and PoE+
Giga-MiniMc are Power Source Equipment (PSE) devices. The PoE+
GigaMiniMc is capable of powering up to two Powered Devices (PD) over standard CAT5 cable or better, whereas the PoE GigaMiniMc can power one PD device via a copper port while delivering data over the other copper port. The PoE+ GigaMiniMc is able to power high-power devices such as touch panels, PTZ (pan-tilt-zoom) IP surveillance cameras, and RFID readers that require more power than the typical 15.4 W provided by standard PSE devices such as the PoE
GigaMiniMc.
The PoE and PoE+ Giga-MiniMc models are fully compatible with the
IEEE 802.3af/at standards to ensure a seamless intergation into your network. Enhanced features include store-and-forward, Autocross and
PoE reset on fiber loss of signal. PoE reset is an advanced function that, when enabled, will force the PSE output power to reset when LINK state is lost on the SFP port.
Application Examples
In the following example, the PoE+ Giga-MiniMc is shown powering two seperate pan/tilt/zoom (PTZ) IP surveillance cameras at a remote location. The PoE+ Giga-MiniMc is powered via AC or 48 VDC, while it can be mounted up to 100 m from the cameras that are being driven via PoE.
Flexible Solution
• Connects 10/100/1000 Mbps copper to 100/1000
Mbps fiber SFP or 10/100/1000 Mbps copper
SFP
• Supports Jumbo Frames (up to 10240 bytes)
• Rugged stand-alone metal enclosure with compact external power supply
• Multiple mounting options (Desktop, DIN Rail or
Wall-mount)
• For
CWDM fiber
• Features configurable PoE Reset on Fiber LOS
Power Options:
• Supports IEEE 802.3af PoE (15.4W) and IEEE
802.3at PoE+ (25.5W) standards
• 4-terminal DC power with a pair of input terminals and a pair of output terminals for cascading power on DIN installation
• External AC power supply
SFP Support
• Auto negotiate speed and flow control for
10/100/1000 copper SFPs with SGMII
• Supports fixed speed 1 Gbps full-duplex copper
SFPs
• Auto detect for 100 or 1000 optical SFPs
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST, SC and SFP
Regulatory Approvals:
FCC Class A, UL/cUL, CE, CSA
Operating Temperature:
+32° F to +158° F (0° C to +70° C) DC terminal Block
+32° F to +122° F (0° C to +50° C) w/ AC Adapter
Storage Temperature:
-40° to +185° F (-40° to +85° C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.80” H x 3.645” W x 3.82” D
(2.032 cm x 9.258 cm x 9.7028 cm)
Power Rating:
AC Wall adapter:
PoE+ Giga-MiniMc
Input: 100 to 240 ±10% VAC, 50/60H, 2A *, Output: 48 VDC, 0.62A
PoE Giga-MiniMc
Input: 100 to 240 ±10% VAC, 50/60H, 0.7A *, Output: 48 VDC, 0.62A
DC Input Voltage:
PoE+ Giga-MiniMc
51 to 57 VDC on DC terminal block, 51 to 57 VDC on DC jack
PoE Giga-MiniMc
45 to 57 VDC on DC terminal block, 48 VDC on DC jack
Shipping Weight:
0.7 lbs (0.3 kg)
Ordering Information
PoE Giga-MiniMc
857-10811 PoE Giga-MiniMc, 2TX/SFP, Various
857-10812 PoE Giga-MiniMc, 2TX/SX-MM850-SC, 220/550 m
857-10813 PoE Giga-MiniMc, 2TX/LX-MM1300-SC, 2 km
857-10814 PoE Giga-MiniMc, 2TX/LX-SM1310-SC, 15 km
857-10815 PoE Giga-MiniMc, 2TX/LX-SM1310/PLUS-SC, 40 km
857-10816 PoE Giga-MiniMc, 2TX/LX-SM1550/LONG-SC, 80 km
857-10817 PoE Giga-MiniMc, 2TX/LX-SM1550/XLONG-SC, 100 km
Single-Strand Fiber
857-10820
PoE Giga-MiniMc, 2TX/SSLX-SM1310-SC
(1310xmt/1550 rcv), 10 km
857-10821
857-10822
857-10823
857-10824
857-10825
857-10826
857-10827
857-10828
857-10829
PoE Giga-MiniMc, 2TX/SSLX-SM1550-SC
(1550xmt/1310 rcv), 10 km
PoE Giga-MiniMc, 2TX/SSBX-SM1310-SC
(1310xmt/1490 rcv), 20 km
PoE Giga-MiniMc, 2TX/SSBX-SM1490-SC
(1490xmt/1310 rcv), 20 km
PoE Giga-MiniMc, 2TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550 rcv), 40 km
PoE Giga-MiniMc, 2TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310 rcv), 40 km
PoE Giga-MiniMc, 2TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490 rcv), 30 km
PoE Giga-MiniMc, 2TX/SSBX-SM1490/PLUS-SC
(1490xmt/1310 rcv), 30 km
PoE Giga-MiniMc, 2TX/SSLX-SM1490/LONG-SC
(1490xmt/1550 rcv), 70 km
PoE Giga-MiniMc, 2TX/SSLX-SM1550/LONG-SC
(1550xmt/1490 rcv), 70 km
PoE+ Giga-MiniMc
857-10911 PoE Giga-MiniMc, 2TX/SFP, Various
857-10912 PoE Giga-MiniMc, 2TX/SX-MM850-SC, 220/550 m
857-10913 PoE Giga-MiniMc, 2TX/LX-MM1300-SC, 2 km
857-10914 PoE Giga-MiniMc, 2TX/LX-SM1310-SC, 15 km
857-10915 PoE Giga-MiniMc, 2TX/LX-SM1310/PLUS-SC, 40 km
857-10916 PoE Giga-MiniMc, 2TX/LX-SM1550/LONG-SC, 80 km
857-10917 PoE Giga-MiniMc, 2TX/LX-SM1550/XLONG-SC, 100 km
Single-Strand Fiber
857-10920
PoE+ Giga-MiniMc, 2TX/SSLX-SM1310-SC
(1310xmt/1550 rcv), 10 km
857-10921
PoE+ Giga-MiniMc, 2TX/SSLX-SM1550-SC
(1550xmt/1310 rcv), 10 km
857-10922
857-10923
857-10924
857-10925
857-10926
857-10927
PoE+ Giga-MiniMc, 2TX/SSBX-SM1310-SC
(1310xmt/1490 rcv), 20 km
PoE+ Giga-MiniMc, 2TX/SSBX-SM1490-SC
(1490xmt/1310 rcv), 20 km
PoE+ Giga-MiniMc, 2TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550 rcv), 40 km
PoE+ Giga-MiniMc, 2TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310 rcv), 40 km
PoE+ Giga-MiniMc, 2TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490 rcv), 30 km
PoE+ Giga-MiniMc, 2TX/SSBX-SM1490/PLUS-SC
(1490xmt/1310 rcv), 30 km
857-10928
PoE+ Giga-MiniMc, 2TX/SSLX-SM1490/LONG-SC
(1490xmt/1550 rcv), 70 km
857-10929
PoE+ Giga-MiniMc, 2TX/SSLX-SM1550/LONG-SC
(1550xmt/1490 rcv), 70 km
Available Accessories
806-00720-00 Power Adapter Clip (USA), (FranMar)
806-00720-01 Power Adapter Clip (UK), (FranMar)
806-00720-02 Power Adapter Clip (Europe), (FranMar)
806-00720-03
806-39105
806-39800
Power Adapter Clip
(Australia/New Zealand), (FranMar)
DIN Rail Clip
PoE Power Adapter for PoE Giga-MiniMc
806-39900 PoE+ Power Adapter for PoE+ Giga-MiniMc
806-39910 PoE+ Isolated Power Adapter
16
Networks
Auto
Negotiation
Auto Cross PoE
10/100 Mbps Auto Negotiating Copper (TX),
100 Mbps Fiber (FX) Ethernet
PD-Switch
The PD-Switch combines flexible copper and fiber interface options with port and packetbased traffic prioritization while extending network range by utilizing Power over Ethernet
(PoE) technology.
Product Overview
The (PoE) PD-Switch is a full-featured, 5-port MAC layer 10/100Base-T switch that extends the range of Ethernet networks, and increases port density, while being powered via IEEE 802.3af compliant PoE through its "PD-port" (eliminating the need to run a separate power line for the device). Ethernet cabling typically runs only 100 meters; the PD-Switch, extends the outer range of an ethernet network by an additional 100 meters.
With multiple port configurations, the PD-Switch provides a variety of port options while increasing port density. PD-Switches come equipped with one "PD" RJ-45 port and either:
Features
Multi-port switch powered by the IEEE 802.3af
Power Over Ethernet Standard
• PD accepts power from any network device providing PoE
• Multiple ports increase network port density
Meets a multitude of installation requirements
• SFP and fiber port configurations (optional) for different network environments
• All RJ-45 ports feature Auto-Cross and Auto
Negotiation
• Port for High Priority traffic
• Available with ST or SC fiber connectors
• Optional single-strand fiber model
Full-Featured Switch
• Broadcast Storm Protection helps control excessive broadcast traffic
• DiffServ on all ports provides Quality of Service prioritization
• Far End Fault provides notification of Link Loss on all fiber ports
• Supports 1916 byte Packet Size
Ordering Information
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber and SFP
Connectors:
RJ-45, ST, SC and SFP
Regulatory Approvals:
FCC Class B, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
1.55”H x 4.75”L x 7.31”D ( 3.94 x 12.07 x 18.57 cm)
Power Rating:
36V DC-50V DC, 56mA-40mA
Shipping Weight:
1.8 lbs (0.82 kg)
• Four 10/100Base-T RJ-45 data ports
• Three 10/100Base-T RJ-45 data ports and one SFP data port
(rate depends on SFP)
• Two 10/100Base-T RJ-45 data ports and one 100Base-FX fiber data port
Ordering Information
Application Example
The PD-Switch has been connected to a central (PoE)
PSE-Switch, extending the range of the network and increasing port density by using a combination of RJ-45 ports and fiber ports.
852-16440
852-16441
852-16442
852-16443
852-16444
852-16445
852-16446
852-16447
PD-Switch, TX/5, 100 m
PD-Switch, TX/4 + SFP, Various
PD-Switch, TX/3 + FX-MM850-ST, 2 km
PD-Switch, TX/3 + FX-MM850-SC, 2 km
PD-Switch, TX/3 + FX-MM1300-ST, 5 km
PD-Switch, TX/3 + FX-MM1300-SC, 5 km
PD-Switch, TX/3 + FX-SM1310/PLUS-ST, 40 km
PD-Switch, TX/3 + FX-SM1310/PLUS-SC, 40 km
852-16448
852-16449
852-16450
PD-Switch, TX/3 + FX-SM1310/LONG-ST, 80 km
PD-Switch, TX/3 + FX-SM1310/LONG-SC, 80 km
PD-Switch, TX/3 + FX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
852-16470
PD-Switch, TX/3 + SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
852-16471
852-16472
852-16473
852-16474
852-16475
PD-Switch, TX/3 + SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
PD-Switch, TX/3 + SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
PD-Switch, TX/3 + SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
PD-Switch, TX/3 + SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
PD-Switch, TX/3 + SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
17
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Auto Cross Fiber Alert
X LINK LINK
X
FIBER
LOS
Link Loss
X X
LOS X
LFPT
X
X
10, 100, 10/100 Mbps and 1000 Mbps
Compact Media Converters
McBasic Series
With its small yet rugged design, internal AC power supply and troubleshooting features, the
McBasic is the best standalone media converter in the industry.
Product Overview
When simple, individual, copper-to-fiber conversions are required, along with advanced troubleshooting features, installing McBasic
Series standalone media converters is the perfect, cost-effective solution. The McBasic’s small, table-top design and durability make it perfect for installation anywhere space is limited.
The McBasic helps make isolating fiber breaks easier with such features as LinkLoss, FiberAlert, Transparency and Link Fault Detection. The
McBasic also features either AutoCross or switch-selectable crossover/ pass-through on twisted pair connections ports. The McBasic-Gigabit offers all the benefits of the McBasic in addition to Link Fault
Pass-Through, but with gigabit speeds.
McBasic 10 Mbps Converters:
• Convert 10 Mbps twisted pair to 10 Mbps fiber.
McBasic 100 Mbps Converters:
• Convert 100 Mbps twisted pair to 100 Mbps fiber.
McBasic 10/100, Auto Sensing
Dual-Speed Converters:
• Convert 10 Mbps twisted pair to 10 Mbps fiber OR convert
100 Mbps twisted pair to 100 Mbps fiber.
McBasic-Gigabit 1000 Mbps Converters:
• Convert 1000 Mbps twisted pair to 1000 Mbps fiber.
Application Example
The diagram illustrates the wide variety of media converters available from IMC Networks including the 10/100 McBasic.
Features
Perfect for a variety of applications
• Small, rugged design offers many advanced features
Meets a multitude of installation requirements
• McBasic: available in 10 Mbps, 100 Mbps and auto-sensing 10/100 Mbps versions
• McBasic-Gigabit: available in 1000 Mbps version
Converts 10 Mbps twisted pair to fiber today, and 100 Mbps twisted pair to fiber tomorrow
• McBasic 10/100 provides transparent end-to-end
10/100 Auto Negotiation for easy upgrade; no user intervention or visits to remote locations required
• McBasic Gigabit also features LFTP
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST, SC (McBasic-Gigabit has SC fiber only)
Regulatory Approvals McBasic:
McBasic: FCC Class B, CE, UL/cUL, CSA
McBasic-Gigabit: FCC Class A, CE, UL/cUL, CSA
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
0° to +160°F (-20° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
1.64”H x 4.75”W x 4.95”D (4.2 x 12.1 x 12.6 cm)
McBasic Gigabit Dimensions:
1.64”H x 4.75”W x 7.3”D (4.2 x 12.1 x 18.6 cm)
Power Rating:
100-240V AC, 50/60Hz, 1.0A
Shipping Weight:
1.7 lbs (0.77 kg) McBasic Gigabit Only
1.3 lbs (0.58 kg) All others
Ordering Information
McBasic TP/FO
855-10230 McBasic, TP/FO-MM850-ST, 2 km
855-10231 McBasic, TP/FO-MM850-SC, 2 km
855-10232 McBasic, TP/FO-MM1300-ST, 2 km
855-10233 McBasic, TP/FO-MM1300-SC, 2 km
855-10234 McBasic, TP/FO-SM1310/PLUS-ST, 40 km
855-10235 McBasic, TP/FO-SM1310/PLUS-SC, 40 km
855-10237 McBasic, TP/FO-SM1310/LONG-ST, 80 km
855-10238 McBasic, TP/FO-SM1310/LONG-SC, 80 km
855-10240 McBasic, TP/FO-SM1550/LONG-SC, 80 km
855-10929
855-10930
855-10927
855-10928
855-10931
855-10932
855-10933
855-10934
McBasic, TX/SX-MM850-ST, 2 km
McBasic, TX/SX-MM850-SC, 2 km
McBasic, TX/FX-MM1300-ST, 5 km
McBasic, TX/FX-MM1300-SC, 5 km
McBasic, TX/FX-SM1310/PLUS-ST, 40 km
McBasic, TX/FX-SM1310/PLUS-SC, 40 km
McBasic, TX/FX-SM1310/LONG-ST, 80 km
McBasic, TX/FX-SM1310/LONG-SC, 80 km
855-10937 McBasic, TX/FX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
855-10949
McBasic, TX/SSFX-MM1310-SC
(1310xmt/1550rcv), 2 km
855-10950
855-10951
855-10952
855-10953
855-10954
855-10955
855-10957
McBasic, TX/SSFX-MM1550-SC
(1550xmt/1310rcv), 2 km
McBasic, TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
McBasic, TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
McBasic, TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
McBasic, TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
McBasic, TX/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
McBasic, TX/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
McBasic 10/100 TX/SX and TX/FX
855-10260
855-10261
855-10262
855-10263
855-10267
McBasic, TX/SX 10/100-MM850-ST, 2 km
McBasic, TX/SX10/100-MM850-SC, 2 km
McBasic, TX/FX 10/100-MM1300-ST, 5 km
McBasic, TX/FX 10/100-MM1300-SC, 5 km
McBasic, TX/FX 10/100-SM1310/PLUS-ST, 40 km
855-10268
855-10269
855-10270
855-10274
McBasic, TX/FX 10/100-SM1310/PLUS-SC, 40 km
McBasic, TX/FX 10/100-SM1310/LONG-ST, 80 km
McBasic, TX/FX 10/100-SM1310/LONG-SC, 80 km
McBasic, TX/FX 10/100-SM1550/LONG-SC, 80 km
McBasic-Gigabit Ethernet (LFPT)
855-11913
855-11914
855-11915
855-11917
855-11918
McBasic-Gigabit, TX/SX-MM850-SC, 220/550 m
McBasic-Gigabit, TX/LX-SM1310-SC, 15 km
McBasic-Gigabit, TX/LX-SM1310/PLUS-SC, 40 km
McBasic-Gigabit, TX/LX-SM1550/LONG-SC, 80 km
McBasic-Gigabit, TX/LX-SM1550/XLONG-SC, 100 km
Single-Strand Fiber
855-11844
McBasic-Gigabit, TX/SSLX-SM1310-SC
(1310xmt/1550rcv), 15 km
855-11845
855-11824
855-11825
855-11846
855-11847
855-11826
855-11827
855-11850
855-11851
855-11852
855-11853
McBasic-Gigabit, TX/SSLX-SM1550-SC
(1550xmt/1310rcv), 15 km
McBasic-Gigabit, TX/SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km
McBasic-Gigabit, TX/SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km
McBasic-Gigabit, TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
McBasic-Gigabit, TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
McBasic-Gigabit, TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km
McBasic-Gigabit, TX/SSBX-SM1450/PLUS-SC
(1490xmt/1310rcv), 30 km
McBasic-Gigabit, TX/SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km
McBasic-Gigabit, TX/SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km
McBasic-Gigabit, TX/SSLX-SM1490/XLONG-SC
(1490xmt/1550rcv), 80 km
McBasic-Gigabit, TX/SSLX-SM1550/XLONG-SC
(1550xmt/1490rcv), 80 km
Accessories See page 46
18
Networks
Auto
Negotiation
Auto Cross Fiber Alert
X LINK
LINK
FIBER
LOS
X
Link Loss
X X
LOS
PoE
PSE-McBasic
100 Mbps Power Over Ethernet Sourcing
Standalone Media Converters
Supporting the IEEE 802.3af PoE standard, the standalone PSE-McBasic media converter offers unparalleled installation flexibility and cost-savings.
Features twisted
• 100Base-FX or SX fiber
802.3af
• Includes fixed, internal AC power for
• Small, rugged design
• Supports Half and Full-Duplex operation
• Includes
Ordering Information
PSE-McBasic: TX/SX and TX/FX
855-16929
855-16930
855-16927
855-16928
855-16931
855-16932
855-16933
855-16934
PSE-McBasic, TX/SX-MM850-ST, 2 km
PSE-McBasic, TX/SX-MM850-SC, 2 km
PSE-McBasic, TX/FX-MM1300-ST, 5 km
PSE-McBasic, TX/FX-MM1300-SC, 5 km
PSE-McBasic, TX/FX-SM1310/PLUS-ST, 40 km
PSE-McBasic, TX/FX-SM1310/PLUS-SC, 40 km
PSE-McBasic, TX/FX-SM1310/LONG-ST, 80 km
PSE-McBasic, TX/FX-SM1310/LONG-SC, 80 km
855-16935 PSE-McBasic, TX/FX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
855-16951
PSE-McBasic, TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
855-16952
855-16953
855-16954
855-16955
855-16957
PSE-McBasic, TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
PSE-McBasic, TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
PSE-McBasic, TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
PSE-McBasic, TX/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
PSE-McBasic, TX/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
Product Overview
Equipped with all the features that have made the McBasic series one of IMC Networks’ most popular brands — copper-to-fiber conversion, troubleshooting capability, a small yet rugged design, and an internal
AC power supply — the PSE-McBasic uses the IEEE 802.3af Power over Ethernet (PoE) standard to create the ideal solution for installing devices such as IP security cameras and Wi-Fi access points at remote locations miles away from the central office. The PSE-McBasic series performs media conversion while providing power to the end-device at the remote site.
Power Over Ethernet technology allows the PSE-McBasic to be the
Power Source Equipment (PSE) by distributing an electrical current across existing twisted pair data cabling. LEDs indicate the amount of power being supplied to the “Powered Device” (PD) as well as if the
PSE-McBasic is over temperature or over current or has an open circuit.
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class B, CE, UL/cUL, CSA
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
1.45”H x 4.73”W x 7.30”D (3.68 x 12.01 x 18.54 cm)
Power Rating:
100-240V AC, 50/60Hz, 1A
Shipping Weight:
1.8 lbs (0.82 kg)
Accessories See page 46
Application Example
By combining media conversion and PoE sourcing capabilities, PSE-McBasic can easily power remote network devices such as IP cameras and WiFi access points.
19
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Auto Cross
Multi-Port, 10/100 Mbps Switching
Standalone Media Converter
AccessConverter
Features Ordering Information
Terminate fiber and connect multiple Ethernet devices — PCs, webcams, printers — at a remote location with the AccessConverter.
Product Overview
The AccessConverter is a multi-port media converter, aggregating three
10/100 Ethernet twisted pair ports into a single 100Base-FX uplink. While typical media converters perform a conversion between one twisted pair interface and one fiber optic interface, the AccessConverter has three
10/100 ports to significantly increase the application flexibility while reducing the cost per conversion.
The AccessConverter is an ideal solution for LAN workgroups and
Fiber-to-the-Premises applications, connecting and aggregating multiple devices — such as PCs, servers, printers, and VoIP phones — into a fiber optic cabling infrastructure. Providing plug-and-play operation, the
AccessConverter/3 features 10/100 Auto Negotiation and AutoCross on the twisted pair ports. The 100Base-FX uplink port supports ST and SC connectors for multi-mode, single-mode and single-strand fiber types, providing fiber connectivity from 2 km up to 80 km distances. Every unit ships with a country-specific power cord.
Most cost-effective fiber converter available today
• Low cost, high flexibility— same small unit performs media conversion and switching functions
• Offers three downlink connections
Perfect for a variety of applications
• Device includes high-reliability power adapter with country-specific clip
• Uplink available on rear or front of unit
• Compact size allows for flexible installation configurations
Space saving alternative
• Device has small, rugged enclosure with compact external power supply
• Table-top or wall-mount installation
Physical Specifications
Fiber Types Supported
AccessConverter
852-10140
852-10150
852-10151
852-10141
852-10154
852-10155
852-10156
852-10157
852-10158
AccessConverter, TX/3 + TX, 100 m
AccessConverter, TX/3 + FX-MM850-ST, 2 km
AccessConverter, TX/3 + FX-MM850-SC, 2 km
AccessConverter, TX/3 + FX-MM1300-ST, 5 km
852-10142 AccessConverter, TX/3 + FX-MM1300-SC, 5 km
852-10141-MT AccessConverter, TX/3 + FX-MM1300-MT, 5 km
852-10143
852-10144
AccessConverter, TX/3 + FX-SM1310/PLUS-ST, 40 km
AccessConverter, TX/3 + FX-SM1310/PLUS-SC, 40 km
852-10145
852-10146
852-10153
AccessConverter, TX/3 + FX-SM1310/LONG-ST, 80 km
AccessConverter, TX/3 + FX-SM1310/LONG-SC, 80 km
852-10147 AccessConverter, TX/3 + FX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
AccessConverter, TX/3 + SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
AccessConverter, TX/3 + SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
AccessConverter, TX/3 + SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
AccessConverter, TX/3 + SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
AccessConverter, TX/3 + SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
AccessConverter, TX/3 + SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km • 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class B, CE, UL/cUL, CSA
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +18°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.92”H x 3.50”W x 4.38”D (2.34 x 8.89 x 11.13 cm)
Power Rating:
AC Wall adapter: 100/240 ±10% VAC input, 50/60 Hz 5V
DC output at 10W, 2.0A
Shipping Weight:
1.1 lbs (0.50 kg)
Application Example
Provide media conversion capabilities for multiple network devices.
20
Networks
Fiber Alert
X LINK
LINK
FIBER
LOS
X
Link Loss
X X
LOS
10, 100, Switching 10/100 Mbps and 1000 Mbps Ethernet
Modular Media Converters
Mc Modules for MediaConverter Series
(McPIM, McLIM, McGigabit)
Features
A cost-effective solution for extending the life of legacy equipment and bringing fiber-to-the-desktop.
Product Overview
When copper-to-fiber or fiber-to-fiber conversions are required for network growth, the MediaConverter Module Series is the perfect solution.
IMC Networks’ MediaConverter Module Series enables easy and costeffective connection of one type of media to other dissimilar media or networking products. This series extends the functionality and production life of both legacy cabling infrastructure and networking equipment when adding fiber to a network.
The MediaConverter Module Series includes:
McPIM:
• One 10 Mbps twisted pair port with an RJ-45 connector
• One 10 Mbps fiber port with ST, SC or MT-RJ connectors
McLIM:
• One 100 Mbps twisted pair port with an RJ-45 connector
• One 100 Mbps fiber port with ST, SC or MT-RJ connectors
Switching McLIM TP-TX/FX:
• One 10/100 Mbps twisted pair port with an RJ-45 connector
• One 100 Mbps fiber port with ST or SC connectors operation
McGigabit:
• One 1000 Mbps twisted pair port with an RJ-45 connector
• One 1000 Mbps fiber port with SC connectors
Application Example
Install modules in any MediaConverter chassis. If the number of required conversions is high but rackmount space is limited, choose the
1U high, 12-slot chassis.
Modules meet a variety of installation requirements
• Supports Ethernet, Fast Ethernet, and Gigabit
Ethernet
• Supports very long fiber distances
A variety of chassis options
• Table-top or rackmountable
• 1, 4, 8 and 12-slot chassis
• 12-slot chassis is only 1U high
Maximizes network uptime
• Modular, hot-swappable architecture reduces operational costs associated with product installation, upgrades and maintenance
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
McPIM TP/FO: FCC Class A, CE
McLIM TX/FX: FCC Class B, CE
McGigabit: FCC Class B, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Shipping Weight:
0.7 lbs (0.3 kg)
Dimensions
0.75” H x 2.5” W x 4”D ( 2.20 x 6.41 x 10.25 cm)
Ordering Information
McPIM: TP/FO
855-12840 McPIM, TP/FO-MM850, ST, 2 km
855-12841
855-12842
855-12843
855-12844
855-12845
855-12846
855-12847
855-12848
855-12849
McPIM, TP/FO-MM850, SC, 2 km
McPIM, TP/FO-MM1300, ST, 2 km
McPIM, TP/FO-MM1300, SC, 2 km
McPIM, TP/FO-SM1310/PLUS, ST, 40 km
McPIM, TP/FO-SM1310/PLUS, SC, 40 km
McPIM, TP/FO-SM1310/LONG, ST, 40 km
McPIM, TP/FO-SM1310/LONG, SC, 40 km
McPIM, TP/FO-SM1550/LONG, ST, 80 km
McPIM, TP/FO-SM1550/LONG, SC, 80 km
McLIM: TX/FX
855-12662 McLIM, TX/SX-MM850, ST, 2 km
855-12663 McLIM, TX/SX-MM850, SC, 2 km
855-12660 McLIM, TX/FX-MM1300, ST, 5 km
855-12661 McLIM, TX/FX-MM1300, SC, 5 km
855-12664 McLIM, TX/FX-SM1310/PLUS, ST, 40 km
855-12665 McLIM, TX/FX-SM1310/PLUS, SC, 40 km
855-12668 McLIM, TX/FX-SM1310/LONG, SC, 80 km
855-12669 McLIM, TX/FX-SM1550/LONG, SC, 80 km
Single-Strand Fiber
855-12680
McLIM, TX/SSFX-SM1310-SC (1310xmt/1550rcv),
20 km
855-12681
855-12682
855-12683
855-12684
855-12685
McLIM, TX/SSFX-SM1550-SC (1550xmt/1310rcv),
20 km
McLIM, TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
McLIM, TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
McLIM, TX/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
McLIM, TX/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
McLIM: TP-TX/FX and TP-TX/SX
855-12620
855-12621
855.12622
855-12623
855-12624
855-12625
McLIM, TP-TX/SX-MM850-ST, 220/550 m
McLIM, TP-TX/SX-MM850-SC, 220/550 m
McLIM, TP-TX/FX-MM1300-ST, 5 km
McLIM, TP-TX/FX-MM1300-SC, 5 km
McLIM, TP-TX/FX-SM1310/PLUS-ST, 40 km
McLIM, TP-TX/FX-SM1310/PLUS-SC, 40 km
Single-Strand Fiber
855-12642
McLIM, TP-TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
855-12643
855-12644
855-12645
McLIM, TP-TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km
McLIM, TP-TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
McLIM, TP-TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
McGigabit: TX/SX and TX/LX
855-12670 McGigabit, TX/SX-MM850-SC, 220/550 m
855-12691 McGigabit, TX/SX-MM1300-SC, 2 km
855-12671 McGigabit, TX/LX-SM1310-SC, 15 km
855-12672 McGigabit, TX/LX-SM1310/PLUS-SC, 40 km
855-12673 McGigabit, TX/LX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
855-12674
McGigabit, TX/SSLX-SM1310-SC
(1310xmt/1550rcv), 15 km
855-12675
855-12694
855-12695
855-12676
855-12677
McGigabit, TX/SSLX-SM1550-SC
(1550xmt/1310rcv), 15 km
McGigabit, TX/SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km
McGigabit, TX/SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km
McGigabit, TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
McGigabit, TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
855-12696
855-12697
855-12686
855-12687
855-12688
855-12689
McGigabit, TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km
McGigabit, TX/SSBX-SM1490/PLUS-SC
(1490xmt/1310rcv), 30 km
McGigabit, TX/SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km
McGigabit, TX/SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km
McGigabit, TX/SSLX-SM1490/XLONG-SC
(1490xmt/1550rcv), 80 km
McGigabit, TX/SSLX-SM1550/XLONG-SC
(1550xmt/1490rcv), 80 km
Use with Chassis Platform
MediaConverter Series, See Page 46
21
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Fiber Alert
X LINK LINK
X
FIBER
LOS
Link Loss
X X
LOS
10, 100, 10/100 Mbps
PC Card Ethernet Media Converters
McPC Series
Ideal for fiber-to-the-desktop applications, the
McPC installs directly inside a PC.
Product Overview
Easily connect fiber to a PC or server with the McPC series of media converters. Installing inside the PC or server, McPC converters are the perfect, low cost alternative to fiber NICs or external media converters.
The McPC series includes:
• McPC 100 Mbps, converting copper to fiber at 100 Mbps
• McPC 10/100 Mbps, converting 10 Mbps copper to 10
Mbps fiber or 100 Mbps copper to 100 Mbps fiber
The McPC series supports 10, 100 & 10/100 protocols and is available for virtually any fiber type, from short-haul multi-mode to long-haul single-mode, with standard ST or SC connectors.
Ease of installation and a variety of Ethernet speed options make the McPC series the perfect solution for FTTD applications and for enterprises with changing requirements such as adding new employees and frequently changing workstation locations.
Features
• Save money by keeping the existing copper NIC and converting inside PC
• No drivers to install; McPC mounts inside any
PC or workstation with a standard PCI or ISA slot
• Includes a standard 4-pin peripheral power connector
• Supports Half and Full-Duplex operation
Ordering Information
ISA
McPC TX/FX 100 Mbps
855-13127 McPC/ISA, TX/FX-MM1300, ST, 5 km
855-13128 McPC/ISA, TX/FX-MM1300, SC, 5 km
855-13328 McPC/ISA, TX/FX-SM1310/PLUS, SC, 40 km
McPC 10/100 Mbps
855-13260
855-13261
855-13263
McPC/ISA, 10/100-MM850, ST, 2 km
McPC/ISA, 10/100-MM850, SC, 2 km
McPC/ISA, 10/100-MM1300, SC, 5 km
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class B, UL/cUL, CSA, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-4° to +158°F (-20° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Shipping Weight:
0.60 lbs (0.22 kg)
PCI
McPC TX/FX 100 Mbps
855-12127 McPC/PCI, TX/FX-MM1300, ST, 5 km
855-12128 McPC/PCI, TX/FX-MM1300, SC, 5 km
855-12328 McPC/PCI, TX/FX-SM1310/PLUS, SC, 40 km
McPC 10/100 Mbps
855-12260
855-12261
855-12263
McPC/PCI, 10/100-MM850, ST, 2 km
McPC/PCI, 10/100-MM850, SC, 2 km
McPC/PCI, 10/100-MM1300, SC, 5 km
Available Accessories
806-39230 SATA Cable for McPC
Application Example
22
Networks
Auto
Negotiation
Fiber Alert
X LINK LINK
X
FIBER
LOS
Link Loss
X X
LOS
Switching 10/100 and Switching 10/100/1000 Mbps
PC Card Ethernet Media Converters
McPC-MediaLinX Series
Ideal for fiber-to-the-desktop applications, the
McPC installs directly inside a PC.
Application Example
Features
• Save money by keeping the existing copper NIC and converting inside PC
• No drivers to install; McPC-MediaLinx and
McPC-Giga-MediaLinX mounts inside any PC or workstation with a standard PCI or ISA slot
• Includes a standard 4-pin peripheral power connector
• Supports Half and Full-Duplex operation
Ordering Information
PCI
McPC-MediaLinX Switching
Ethernet (10/100 Mbps)
855-12731
855-12733
855-12735
McPC/PCI-MediaLinX, MM850, SC, 2 km
McPC/PCI-MediaLinX, MM1300, SC, 5 km
McPC/PCI-MediaLinX, SM1310/PLUS, SC, 40 km
LowPCI
McPC-MediaLinX Switching
Ethernet (10/100 Mbps)
855-15733 McPC/LowPCI-MediaLinX, MM1300, SC, 5 km
855-15735 McPC/LowPCI-MediaLinX, SM1310/PLUS, SC, 40 km
Product Overview
Easily connect fiber to a PC or server with the McPC series of converters. Installing inside the PC or server, McPC converters are the perfect, low cost alternative to fiber NICs or external media converters.
The McPC-MediaLinX Series includes:
• McPC MediaLinX Switching Ethernet
- A rate converter as well as a media converter, the McPC
MediaLinX Switching Ethernet converts 10 or 100 Mbps over copper to 100 Mbps over fiber
• McPC-Giga-MediaLinX Switching Gigabit
Ethernet
- A rate converter as well as a media converter, the McPC-
Giga-MediaLinX Switching converts 10, 100 or 1000 Mbps over copper to 1000 Mbps over fiber
The McPC-MediaLinX series supports 10/100 & 10/100/1000 protocols and is available for virtually any fiber type, from short-haul multi-mode to long-haul single-mode, with standard ST or SC connectors.
Ease of installation and a variety of Ethernet speed options make the
McPC-MediaLinX series the perfect solution for FTTD applications and for enterprises with changing requirements such as adding new employees and frequently changing workstation locations.
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class B, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-4° to +158°F (-20° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Shipping Weight:
0.60 lbs (0.22 kg)
PCI
McPC-Giga-MediaLinX Switching
Ethernet (10/100/1000 Mbps)
855-12920
855-12921
McPC/PCI-Giga-MediaLinX, TX/SX-MM850, SC
220/550 m
McPC/PCI-Giga-MediaLinX, TX/LX-SM1300, SC
15 km
855-12922
McPC/PCI-Giga-MediaLinX, TX/LX-SM1310/PLUS,
SC 40 km
855-12924
McPC/PCI-Giga-MediaLinX, TX/LX-SM1550/LONG,
SC, 80 km
Single-Strand Fiber
855-12927
855-12928
855-12929
855-12930
McPC/PCI-Giga-MediaLinX, TX/SSLX-SM1310,
SC, 15 km
McPC/PCI-Giga-MediaLinX, TX/SSLX-SM1550,
SC, 15 km
McPC/PCI-Giga-MediaLinX, TX/SSLX-SM1310/PLUS,
SC, 40 km
McPC/PCI-Giga-MediaLinX, TX/SSLX-SM1550/LONG,
SC, 40 km
LowPCI
McPC-Giga-MediaLinX Switching
Ethernet (10/100/1000 Mbps)
855-15919 McPC/LowPCI-Giga-MediaLinX,TX/SFP, Various
855-15920
855-15921
McPC/LowPCI-Giga-MediaLinX, TX/SX-MM850,SC,
220/550 m
McPC/LowPCI-Giga-MediaLinX, TX/LX-SM1310-SC,
15 km
Available Accessories
806-39230 SATA Cable for McPC
23
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Fiber Alert
X LINK
LINK
FIBER
LOS
X
Link Loss
X X
LOS
1.25 Gbps Ethernet
PC Card Ethernet Media Converter
McPC-Gigabit Series
Ideal for fiber-to-the-desktop applications, the
McPC installs directly inside a PC.
Features
• Save money by keeping the existing copper NIC and converting inside PC
• No drivers to install; McPC-Gigabit mounts inside any PC or workstation with a standard PCI slot
• Includes a standard 4-pin peripheral power connector
• Supports Half and Full-Duplex operation
• Includes
Ordering Information
PCI
McPC-Gigabit
855-12900
855-12901
855-12902
McPC/PCI-Gigabit, TX/SX-MM850-SC, 220/550 m
McPC/PCI-Gigabit, TX/LX-SM1310-SC, 15 km
McPC/PCI-Gigabit, TX/LX-SM1310/PLUS-SC, 40 km
855-12903 McPC/PCI-Gigabit, TX/LX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
855-12904
McPC/PCI-Gigabit, TX/SSLX-SM1310-SC
(1310xmt/1550rcv), 15 km
855-12905
855-12906
855-12907
McPC/PCI-Gigabit, TX/SSLX-SM1550-SC
(1550xmt/1310rcv), 15 km
McPC/PCI-Gigabit, TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
McPC/PCI-Gigabit, TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
Product Overview
Easily connect fiber to a PC or server with the McPC series of converters. Installing inside the PC or server, McPC converters are the perfect, low cost alternative to fiber NICs or external media converters.
The McPC-Gigabit series includes:
• McPC-Gigabit, converting copper to fiber at 1.25 Gbps
The McPC-Gigabit series supports Gigabit protocols and is available for virtually any fiber type, from short-haul multi-mode to long-haul single-mode, with standard SC connectors.
Ease of installation and a variety of distance options make the
McPC-Gigabit series the perfect solution for FTTD applications and for enterprises with changing requirements such as adding new employees and frequently changing workstation locations.
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class B, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-4° to +158°F (-20° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Shipping Weight:
0.60 lbs (0.22 kg)
Available Accessories
806-39230 SATA Cable for McPC
Application Example
24
Networks
CWDM
WDM (Wave Division Multiplexer) Media Converters
WDM/2 Series
Features
With WDM products, service providers and enterprise network managers can easily double fiber capacity and integrate multiple protocols.
Product Overview
Wavelength Division Multiplexing (WDM) is a technology that enables the transmitting of multiple, optical signals on different wavelengths over one strand of fiber. The series is designed for installations where fiber is limited in terms of availability. Service providers and enterprise network managers can easily double their fiber capacity without incurring the costs associated with installing new fiber. Campus area network managers can deploy the IMC Networks WDM solution, for example, to combine voice and data traffic over the same duplex fiber between company facilities.
Leverages investment on existing fiber infrastructure
• Doubles the capacity of installed fiber by transmitting two wavelengths on one strand of fiber
Supports multiple protocols and
1310 nm and 1550 nm single-mode fiber
Easy to install - no configuration
• Just slide the iMcV-WDM/2 into a chassis and match the fiber connectors with the 1310 nm and 1550 nm wavelengths
• WDM/2 chassis performs multiplexing with NO outside power requirement
• Requires two slots in a chassis; modules are double-wide
Maximizes network uptime
• Modular, hot-swappable architecture reduces operational costs associated with product installation, upgrades and maintenance
Physical Specifications
Fiber Types Supported
Protocol and speed-independent; available in standalone and modular versions
The WDM/2 and iMcV-WDM are two-channel, passive, protocol and speed-independent Wavelength Division Multiplexers that allow two individual wavelengths to share one fiber pair; Full-Duplex data travels on 1310 nm and 1550 nm to virtually double the capacity of installed fiber. Deploy WDM products in pairs so that the host site will multiplex
1310 nm and 1550 nm onto the fiber and the remote site will then separate the signals by the wavelength. Available in standalone and modular versions, protocol-independent WDM products enable the transmitting of any protocol and any speed over 1310 nm or 1550 nm single-mode fiber.
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
SC
Regulatory Approvals:
FCC Class A, UL/cUL, CSA, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Supports a variety of protocols; easy installation
As passive, protocol-independent Wavelength Division Multiplexers,
WDM/2 and iMcV-WDM comply with a wide range of communications protocols including Ethernet (10/100/1000 Mbps), SONET/SDH
(OC-3, OC-12, OC-48), FDDI, ATM, ESCON, T1/E1, E3, DS3 and Fibre
Channel. Installing WDM products is easy — the standalone WDM/2 chassis comes ready to install and iMcV-WDM modules slide into any
IMC Networks iMediaChassis or MediaChassis/2. No configuration is required for either version.
Altitude:
0 to 10,000 ft.
Shipping Weight:
0.9 lbs (0.34 kg) Module
1.1 lbs (0.50 kg) Standalone Chassis
Ordering Information iMcV-WDM/2
(Double Wide Module)
849-14100 iMcV-WDM/2-SM1310-SC
WDM/2
(Stand Alone Chassis)
849-10100 WDM/2-SM1310-SC
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
Application Example
Connect two fiber network segments using a single strand.
25
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
CWDM
Industrial
Ethernet
Modular 4 Channel CWDM Multiplexer/Demultiplexer
IE-iMcV-MuxDemux/4
The IE-iMcV-MuxDemux/4 is a CWDM Passive
Optical Add/Drop Multiplexing (OADM) Module
Product Overview
Coarse Wavelength Division Multiplexing (CWDM) is a technology that enables the transmission of multiple optical signals on different wavelengths over one strand of fiber. Suited for installations where fiber is limited in terms of availability, service providers and enterprise network managers can easily multiply their fiber capacity without incurring the costs associated with installing new fiber. For customers deploying high-end gigabit switches, the IE-iMcV-MuxDeMux/4 is ideal for supplying the growing need for greater bandwidth over fiber.
The IE-iMcV-MuxDemux/4 is a dual-wide module that provides 4 channels (8 channels using two modules) of CWDM, a network port for connecting two modules back-to-back, and an expansion port that can accommodate an existing 1310nm fiber network and for cascading a second unit.
The IE-iMcV-MuxDemux/4 modules are entirely passive, requiring no external power to function. The IE-MuxDemuxChassis/2 is an unpowered, 1U high chassis, specially designed to house the IE-iMcV-
MuxDemux/4, although it can be installed in compatible MediaChassis and iMediaChassis.
Features
Leverages Investment on Existing
Fiber Infrastructure
• 4 channel OADM CWDM Add/Drop multiplexer modules
• Speed and protocol independent
(up to 10 Gbps)
• Low
• Add up to 8 CWDM channels to an existing 1310nm network
Easy to install; no configuration
• Install the IE-iMcV-MuxDemux/4 into a compatible chassis and match the fiber connectors with the 1470nm through
1610nm wavelengths
• Module performs multiplexing with no external power requirement
• Requires two slots in a compatible chassis
Perfect for a variety of applications
• Daisy chain 2 modules together for 8 CWDM channels + one 1310nm over duplex fiber
• Designed with industry standard LC fiber connectors
• Modular, hot-swappable architecture reduces operational costs associated with product installation, upgrades and maintenance
• IE model supports extended temperature
Connectors:
LC
Operating Temperature:
-40° F to +185° F (-40° C to +85° C)
Storage Temperature:
-40° F to +185° F (-40° C to +85° C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
Double-wide, two slot chassis module
Shipping Weight:
0.9 lbs (0.34 kg)
Use with Other Chassis Platforms iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
Ordering Information
IE-iMcV-MuxDemux/4
844-18147 IE-iMcV-MuxDemux/4, 1470-1530-LC
844-18155 IE-iMcV-MuxDemux/4, 1550-1610-LC
Chassis
IE-MuxDemuxChassis/2
850-36102 IE-MuxDemuxChassis/2
Application Example
Often a company will rent fiber from a municipal service provider to connect two buildings that are occupied by the same company. Given that the cost of fiber is typically determined by the number of strands leased and distance traveled, it is economically important to minimize the number of fibers used. In this application, the IE-iMcV-MuxDemux/4 is an ideal cost-saving solution that is transferring four different protocols and varying speeds over the same pair of single-mode fiber.
Networks
Visit www.imcnetworks.com or www.mediaconverter.com
26
Auto
Negotiation
Managed Auto Cross Fiber Alert
X LINK LINK
X
FIBER
LOS
Link Loss
X X
LOS X
LFPT
X
X
Config
Control
Dual Port, Extended Temperature (IE), 100 Mbps
Ethernet SNMP-Manageable Media Converter
IE-iMcV-2xLIM
Double your media conversion capacity with the IE-iMcV-2xLIM SNMP-manageable media converter modules.
Product Overview
The IE-iMcV-2xLIM, TX/SFP is a Fast Ethernet module which provides two conversions of 100Base-TX twisted pair to 100Base-FX/SX singlemode or multi-mode fiber. There are two sets of ports, RJ-45 (copper) and SFP (fiber). The SFP port supports all MSA and Cisco compliant,
SC, LC and single-fiber 155 Mbps SFPs. Designed as a Layer 1 device, the IE-iMcV-2xLIM is entirely transparent to both Layer 2 and
Layer 3 protocols. The IE-iMcV-2xLIM is SNMP-manageable and can be installed into the modular, SNMP-manageable iMediaChassis or the
MediaChassis series.
Easily configure and manage converters with the GUI-based iView².
As an SNMP management application, iView² gives network managers the ability to monitor and control IMC Networks’ products. iView² runs standalone on Windows NT/XP/2000 or as a Web Server running under IIS. For assistance in selecting the right version of iView² for your operating system, visit our web site at: http://www.imcnetworks.com/
Products/iView2.cfm
Features
Cost-effective and flexible
• Functions as two independent copper to fiber media converters, thus doubling port density in the iMediaChassis and MediaChassis product lines
Maximizes network uptime
• 100 Mbps SFPs and 2xLIM modules are hotswappable; no need to power-down chassis when upgrading or troubleshooting a single module
Eases Troubleshooting
• Far End Fault provides notification of Far
End Link Loss on the fiber port.
• Link Fault Pass-Through (LFPT) is a troubleshooting feature that monitors the copper (TXLL) and fiber (FXLL) ports of the unit; if a port loses LINK, the unit disables the transmitting signal on the other port and notifies the user via LED
• Config Control retains the latest module configuration if it’s replaced, regardless of how the initial configuration was setup; whether by
DIP Switch or SNMP Management Module
Connectors:
2 x RJ-45 and 2 x SFP ports (SFPs sold separately)
Regulatory Approvals:
FCC Class B
UL, CSA, CE
TUV
Operating Temperature:
-40° F to +176° F (-40° C to +80° C)
Storage Temperature:
-40° F to +176° F (-40° C to +80° C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight:
0.30 lbs (0.11 kg)
Config
Control
Configuration Control
Its main function is to assist the end-user by retaining the latest configuration regardless of how the initial configuration was setup, whether through DIP Switch settings or the
SNMP Management Module’s configuration.
* Notes: Modules with the Config Control Feature
• iView 2 v.1.8.9 and SNMP Firmware v.C4 must be installed to use IMC’s Configuration Control Feature
• iMcV-Modules that offer Configuration Control are indentified by the label on the front faceplate and reference a different part number.
• New replacement products are NOT backwards compatible with the iMediaChassis/18
Ordering Information
IE-iMcV-2xLIM, TX/SFP
850-18610
IE-iMcV-2xLIM, TX/SFP (requires IE-SFP/155 module(s)), Various
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
Application Example
Populating a iMediaChassis/20 with 20 IE-iMcV-2xLIM modules doubles the number of lines that can be served in an ISP network environment at a lower cost. Additionally, it improves remote management through the use of the FEF and LFPT functions and through DDMI on select SFPs.
27
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
LINK
LINK X
FIBER
LOS
X
Link Loss
X X
LOS X
LFPT
X
X
Config
Control
10, 100, 10/100 Mbps
Modular Converters
iMcV-PIM, iMcV-LIM Modules
Features
Monitor and control all connections from a central site with SNMP-manageable “iMcV-“ media conversion modules.
Meets a variety of installation requirements
• Choose from a wide range of speeds up to Fast
Ethernet
• Available for multi-mode or single-mode fiber
• Double fiber capacity with single-strand fiber versions
• Supports very long fiber distances
Easy to configure and manage with GUI-based iView²
• Up and running in less than five minutes
• Monitor links and receive vital traffic and health information and notification should problems occur
Maximizes network uptime
• Modular, hot-swappable architecture reduces operational costs associated with product installation, upgrades and maintenance
Configuration Control
• Retains the latest configuration
Product Overview
Satisfying today’s networking needs while preparing for tomorrow’s cabling requirements can make designing and installing the physical layer of networks a daunting task. The decreasing cost of fiber optic cabling and switching equipment makes all-optical LANs the obvious choice when future-proofing network equipment. Replacing legacy equipment and wiring infrastructure is a costly choice. Managed media conversion allows implementation of new technologies on existing networks, while monitoring all connections, to keep networks running and up-to-date.
IMC Networks offers a wide range of SNMP-managed Ethernet copper to fiber media converters, with a choice of fixed rate or rate conversion capabilities. The “iMcV-“ modules also include troubleshooting features and LEDs to assist in network diagnostics as well as make isolating cable breaks easier. The 100 Mbps iMcV-Lim also features Link Fault
Pass-Through. In addition, replacing the hot-swappable modules won’t disable other modules services running within the same chassis during product upgrades or maintenance and troubleshooting.
All converters feature an RJ-45 copper port and a fiber port, with a choice of SC or ST connectors.
“iMcV-“ media converters include:
• iMcV-PIM - convert 10 Mbps copper to 10 Mbps fiber
• iMcV-LIM - convert 100 Mbps copper to 100 Mbps fiber
• iMcV-LIM 10/100 - convert 10 Mbps copper to 10 Mbps fiber or
100 Mbps copper to 100 Mbps fiber
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class B, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight:
0.30 lbs (0.11 kg)
Config
Control
Configuration Control
Its main function is to assist the end-user by retaining the latest configuration regardless of how the initial configuration was setup, whether through DIP Switch settings or the SNMP
Management Module’s configuration.
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
* Notes: Modules with the Config Control Feature
• iView 2 v.1.8.9 and SNMP Firmware v.C4 must be installed to use IMC’s
Configuration Control Feature
• iMcV-Modules that offer Configuration Control are indentified by the label on the front faceplate and reference a different part number.
• New replacement products are NOT backwards compatible with the iMediaChassis/18
CWDM versions available,
See website for details
Ordering Information iMcV-PIM 10 Mbps
850-14940
850-14941
850-14942
850-14943
850-14944
850-14945
850-14946
850-14947
850-14949 iMcV-PIM, TP/FO-MM850-ST, 2 km iMcV-PIM, TP/FO-MM850-SC, 2 km iMcV-PIM, TP/FO-MM1300-ST, 2 km iMcV-PIM, TP/FO-MM1300-SC, 2 km iMcV-PIM, TP/FO-SM1310/PLUS-ST, 40 km iMcV-PIM, TP/FO-SM1310/PLUS-SC, 40 km iMcV-PIM, TP/FO-SM1310/LONG-ST, 40 km iMcV-PIM, TP/FO-SM1310/LONG-SC, 40 km iMcV-PIM, TP/FO-SM1550/LONG-SC, 80 km
iMcV-LIM TX/FX 100 Mbps with
(LFPT) and Config Control *
850-15611 iMcV-LIM, TX/SX-MM850-ST, 2 km
850-15612 iMcV-LIM, TX/SX-MM850-SC, 2 km
850-15613 iMcV-LIM, TX/FX-MM1300-ST, 5 km
850-15614 iMcV-LIM, TX/FX-MM1300-SC, 5 km
850-15617 iMcV-LIM, TX/FX-SM1310/PLUS-ST, 40 km
850-15618 iMcV-LIM, TX/FX-SM1310/PLUS-SC, 40 km
850-15619 iMcV-LIM, TX/FX-SM1310/LONG-ST, 80 km
850-15620 iMcV-LIM, TX/FX-SM1310/LONG-SC, 80 km
850-15622 iMcV-LIM, TX/FX-SM1550/LONG-SC, 80 km
850-15623 iMcV-LIM, TX/FX-SM1550/XLONG-SC, 100 km
Single-Strand Fiber
850-15631 iMcV-LIM, TX/SSFX-MM1310-SC (1310xmt/1550rcv), 2 km
850-15632 iMcV-LIM, TX/SSFX-MM1550-SC (1550xmt/1310rcv), 2 km
850-15633 iMcV-LIM, TX/SSFX-SM1310-SC (1310xmt/1550rcv), 20 km
850-15634 iMcV-LIM, TX/SSFX-SM1550-SC (1550xmt/1310rcv), 20 km
850-15635
850-15636
850-15637
850-15638 iMcV-LIM, TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km iMcV-LIM, TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km iMcV-LIM, TX/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km iMcV-LIM, TX/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km iMcV-LIM TX/FX 10/100 Mbps
850-14260 iMcV-LIM, 10/100-MM850-ST, 2 km
850-14261 iMcV-LIM, 10/100-MM850-SC, 2 km
850-14262 iMcV-LIM, 10/100-MM1300-ST, 5 km
850-14263 iMcV-LIM, 10/100-MM1300-SC, 5 km
850-14267 iMcV-LIM, 10/100-SM1310/PLUS-ST, 40 km
850-14268 iMcV-LIM, 10/100-SM1310/PLUS-SC, 40 km
850-14269 iMcV-LIM, 10/100-SM1310/LONG-ST, 80 km
850-14270 iMcV-LIM, 10/100-SM1310/LONG-SC, 80 km
850-14274 iMcV-LIM, 10/100-SM1550/LONG-SC, 80 km
Single-Strand Fiber
850-14240 10/100-SSFX-MM1310-SC (1550 rcv), 2 km
850-14243 10/100-SSFX-MM1550-SC (1310 rcv), 2 km
850-14244 10/100-SSFX-SM1310-SC (1550 rcv), 20 km
850-14245 10/100-SSFX-SM1550-SC (1310 rcv), 20 km
850-14246 10/100-SSFX-SM1310/PLUS-SC (1550 rcv), 40 km
850-14247 10/100-SSFX-SM1550/PLUS-SC (1310 rcv), 40 km
850-14248 10/100-SSFX-SM1310/LONG-SC (1550 rcv), 60 km
850-14249 10/100-SSFX-SM1550/LONG-SC (1310 rcv), 60 km
Visit www.imcnetworks.com or www.mediaconverter.com
28
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
LINK
LINK X
FIBER
LOS
X
Link Loss
X X
LOS X
LFPT
X
X
Config
Control
1000 Mbps
Modular Converters iMcV-Gigabit Modules
Monitor and control all connections from a central site with SNMP-manageable “iMcV-“ media conversion modules.
Product Overview
Satisfying today’s networking needs while preparing for tomorrow’s cabling requirements can make designing and installing the physical layer of networks a daunting task. The decreasing cost of fiber optic cabling and switching equipment makes all-optical LANs the obvious choice when future-proofing network equipment. Replacing legacy equipment and wiring infrastructure is a costly choice. Managed media conversion allows implementation of new technologies on existing networks, while monitoring all connections, to keep networks running and up-to-date.
Features
Meets a variety of installation requirements
• Available for multi-mode or single-mode fiber
• Double fiber capacity with single-strand fiber versions
• Supports very long fiber distances
Easy to configure and manage with GUI-based iView²
• Up and running in less than five minutes
• Monitor links and receive vital traffic and health information and notification should problems occur
Maximizes network uptime
• Modular, hot-swappable architecture reduces operational costs associated with product installation, upgrades and maintenance
Configuration Control
• Retains the latest configuration
IMC Networks offers a range of SNMP-managed Ethernet copper to fiber media converters, with a choice of fixed rate or rate conversion capabilities. The “iMcV-“ modules also include troubleshooting features and LEDs to assist in network diagnostics as well as make isolating cable breaks easier. In addition, replacing the hot-swappable modules won’t disable other modules services running within the same chassis, during product upgrades or maintenance and troubleshooting.
All converters feature an RJ-45 copper port and a fiber port with SC connectors.
“iMcV-“ media converters include:
• iMcV-Gigabit - convert copper to fiber at a data rate of up to
1.25 Gbps
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class A, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
IE Operating Temperature:
-40° to + 185°F(-40° to +85°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight:
0.30 lbs (0.11 kg)
Config
Control
Configuration Control
Is available on select models of the iMcV-Gigabit and
IE-iMcV-Gigabit SFP with LFPT. Its main function is to assist the end-user by retaining the latest configuration regardless of how the initial configuration was setup, whether through
DIP Switch settings or the SNMP Management Module’s configuration.
* Notes: Modules with the Config Control Feature
• iView 2 v.1.8.9 and SNMP Firmware v.C4 must be installed to use IMC’s
Configuration Control Feature
• iMcV-Modules that offer Configuration Control are indentified by the label on the front faceplate and reference a different part number.
• New replacement products are NOT backwards compatible with the iMediaChassis/18
Ordering Information
* IE-iMcV-Gigabit TX/SFP 1000
Mbps with Link Fault Pass-Through
(LFPT) and Config Control
850-18510 IE-iMcV-Gigabit, TX/SFP (requires one IE-SFP/1250 module)
* iMcV-Gigabit TX/FX 1000 Mbps with Link Fault Pass-Through
(LFPT) and Config Control
850-15511 iMcV-Gigabit, TX/SX-MM850-SC, 220/550 m
850-15512 iMcV-Gigabit, TX/LX-SM1310-SC, 10 km
850-15513 iMcV-Gigabit, TX/LX-SM1310/PLUS-SC, 40 km
850-15514 iMcV-Gigabit, TX/LX-SM1550/LONG-SC, 80 km
850-15515 iMcV-Gigabit, TX/LX-SM1550/XLONG-SC, 100 km
Single-Strand Fiber
850-15521
850-15522
850-15523
850-15524
850-15525
850-15526
850-15527
850-15528
850-15529
850-15530 iMcV-Gigabit, TX/SSLX-SM1310-SC
(1310xmt/1550rcv), 10 km iMcV-Gigabit, TX/SSLX-SM1550-SC
(1550xmt/1310rcv), 10 km iMcV-Gigabit, TX/SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km iMcV-Gigabit, TX/SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km iMcV-Gigabit, TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km iMcV-Gigabit, TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km iMcV-Gigabit, TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km iMcV-Gigabit, TX/SSBX-SM1490/PLUS-SC
(1490xmt/1310rcv), 30 km iMcV-Gigabit, TX/SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km iMcV-Gigabit, TX/SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km
CWDM versions available,
See website for details
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
29
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
X LINK
LINK
FIBER
LOS
X
Link Loss
X X
LOS X
LFPT
X
X
Config
Control
Rate Converting 10/100 Mbps and
10/100/1000 Mbps Modular Converters iMcV-MediaLinX, iMcV-Giga-MediaLinX Modules
Features
Monitor and control all connections from a central site with SNMP-manageable “iMcV-“ media conversion modules.
Product Overview
Satisfying today’s networking needs while preparing for tomorrow’s cabling requirements can make designing and installing the physical layer of networks a daunting task. The decreasing cost of fiber optic cabling and switching equipment makes all-optical LANs the obvious choice when future-proofing network equipment. Replacing legacy equipment and wiring infrastructure is a costly choice. Managed media conversion allows implementation of new technologies on existing networks, while monitoring all connections, to keep networks running and up-to-date.
IMC Networks offers a wide range of SNMP-managed Ethernet copper to fiber media converters, with a choice of fixed rate or rate conversion capabilities. The “iMcV-“ modules also include troubleshooting features and LEDs to assist in network diagnostics as well as make isolating cable breaks easier. The iMcV-MediaLinX and iMcV-Giga-MediaLinX also features Link Fault Pass-Through. In addition, replacing the hot-swappable modules won’t disable other modules services running within the same chassis, during product upgrades or maintenance and troubleshooting.
All converters feature an RJ-45 copper port and a fiber port, with a choice of SC or ST (non-Gigabit only) connectors.
“iMcV-“ media and rate converters include:
• iMcV-MediaLinX – convert 10 Mbps or 100 Mbps copper to 100
Mbps fiber
• iMcV-Giga-MediaLinX – convert 10 Mbps, 100 Mbps or 1000
Mbps copper to 1000 Mbps fiber
Rate converters employ Auto Negotiation functionality on the twisted pair port for plug-and-play operation, or they can be manually configured for the desired speed and duplex mode.
Config
Control
Configuration Control
Is available on select models of the iMcV-MediaLinx and
IE-iMcV-MediaLinX TX/SFP. Its main function is to assist the end-user by retaining the latest configuration regardless of how the initial configuration was setup, whether through DIP Switch settings or the SNMP Management Module’s configuration.
* Notes: Modules with the Config Control Feature
• iView 2 v.1.8.9 and SNMP Firmware v.C4 must be installed to use IMC’s
Configuration Control Feature
• iMcV-Modules that offer Configuration Control are indentified by the label on the front faceplate and reference a different part number.
• New replacement products are NOT backwards compatible with the iMediaChassis/18
Meets a variety of installation requirements
• Choose from a range of speeds up to Gigabit
Ethernet
• Available for multi-mode or single-mode fiber
• Double fiber capacity with single-strand fiber versions
• Supports very long fiber distances
Easy to configure and manage with GUI-based iView²
• Up and running in less than five minutes
• Monitor links and receive vital traffic and health information and notification should problems occur
Maximizes network uptime
• Modular, hot-swappable architecture reduces operational costs associated with product installation, upgrades and maintenance
Configuration Control
• Retains the latest configuration
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45, ST and SC
Regulatory Approvals:
FCC Class B, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
IE Operating Temperature:
-40° to + 185°F(-40° to +85°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight:
0.30 lbs (0.11 kg)
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
CWDM versions available,
See website for details
Ordering Information
IE-iMcV-MediaLinX TX/SFP 10/100
Mbps with Link Fault Pass-Through
(LFPT) and Config Control *
856-18700
IE-iMcV-MediaLinX, TX/SFP (requires one SFP/155-ED
Module required)
iMcV-MediaLinX TX/FX
10/100 Mbps with Link Fault
Pass-Through (LFPT) and Config
Control *
856-15711 iMcV-MediaLinX, TX/FX-MM850-ST, 2 km
856-15712 iMcV-MediaLinX, TX/FX-MM850-SC, 2 km
856-15713 iMcV-MediaLinX, TX/FX-MM1300-ST, 5 km
856-15714 iMcV-MediaLinX, TX/FX-MM1300-SC, 5 km
856-15717 iMcV-MediaLinX, TX/FX-SM1310/PLUS-ST, 40 km
856-15718 iMcV-MediaLinX, TX/FX-SM1310/PLUS-SC, 40 km
856-15719 iMcV-MediaLinX, TX/FX-SM1310/LONG-ST, 80 km
856-15720 iMcV-MediaLinX, TX/FX-SM1310/LONG-SC, 80 km
856-15723 iMcV-MediaLinX, TX/FX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
856-15731 iMcV-MediaLinX, TX/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
856-15732
856-15733
856-15734
856-15735
856-15736 iMcV-MediaLinX, TX/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km iMcV-MediaLinX, TX/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km iMcV-MediaLinX, TX/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km iMcV-MediaLinX, TX/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km iMcV-MediaLinX, TX/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km iMcV-Giga-MediaLinX TX/LX
10/100/1000 Mbps with Link Fault
Pass-Through (LFPT)
856-11959 iMcV-Giga-MediaLinX, TX/SX-MM850-ST, 220/550 m
856-11950 iMcV-Giga-MediaLinX, TX/SX-MM850-SC, 220/550 m
856-11951 iMcV-Giga-MediaLinX, TX/LX-SM1310-SC, 15 km
856-11952 iMcV-Giga-MediaLinX, TX/LX-SM1310/PLUS-SC, 40 km
856-11953 iMcV-Giga-MediaLinX, TX/LX-SM1550/LONG-SC, 80 km
856-11958 iMcV-Giga-MediaLinX, TX/LX-SM1550/XLONG-SC, 100 km
Single-Strand Fiber
856-11940
856-11941
856-11933
856-11935
856-11942
856-11943
856-11937
856-11939
856-11954
856-11955 iMcV-Giga-MediaLinX, TX/SSLX-SM1310-SC
(1310xmt/1550rcv), 10 km iMcV-Giga-MediaLinX, TX/SSLX-SM1550-SC
(1550xmt/1310rcv), 10 km iMcV-Giga-MediaLinX, TX/SSBX-SM1310-SC
(1310xmt/1490rcv), 10 km iMcV-Giga-MediaLinX, TX/SSBX-SM1490-SC
(1490xmt/1310rcv), 10 km iMcV-Giga-MediaLinX, TX/SSLX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km iMcV-Giga-MediaLinX, TX/SSLX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km iMcV-Giga-MediaLinX, TX/SSBX-SM1310/PLUS-SC
(1310xmt/1490rcv), 30 km iMcV-Giga-MediaLinX, TX/SSBX-SM1490/PLUS-SC
(1490xmt/1310rcv), 30 km iMcV-Giga-MediaLinX, TX/SSLX-SM1490/LONG-SC
(1490xmt/1550rcv), 70 km iMcV-Giga-MediaLinX, TX/SSLX-SM1550/LONG-SC
(1550xmt/1490rcv), 70 km
Visit www.imcnetworks.com or www.mediaconverter.com
30
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
X LINK LINK
X
FIBER
LOS
Link Loss
X X
LOS
Config
Control
T1/E1/J1 Modular Converters iMcV-T1/E1/J1 and IE-iMcV-T1/E1/J1-LineTerm with Config Control
The ideal solution for extending PBX or legacy
Telco circuits over fiber optics in the local loop and or long-haul applications.
Product Overview
SNMP-manageable, the iMcV-T1/E1/J1 converter series of modules extend1.544 Mbps T1/J1 and 2.048 Mbps E1 copper-based PBX, router and switch circuits over regular duplex fiber or single-strand fiber optics. Supporting fiber distances of up to 80 km, the iMcV-T1/E1/J1 series of converters include built-in jitter removal, line integrity testing, diagnostic tools (Loopback mode and Transmit Data Source) and remote management features.
Select from the iMcV-T1/E1/J1, offering standard repeater-like functionality, or the IE-iMcV-T1/E1/J1-LineTerm which incorporates advanced features such as Line Terminating functionality and config control, support for both
Alarm Indication Signals (AIS) and Remote Alarm Indications (RAI). Both versions are designed to be installed in pairs.
The IE-iMcV-T1/E1/J1 LineTerm modules are installed as a HOST-
REMOTE pair and can be remotely managed when the HOST is installed in an iMediaChassis with an SNMP–Management Module. This enables network managers to conduct loopback testing, to monitor, and to manage units located up to 80 km away.
Config
Control
Configuration Control
Is available on select models of the IE-iMcV-T1/E1/J1 Line Term and IE-iMcV-T1/E1/J1 TP/SFP. Its main function is to assist the end-user by retaining the latest configuration regardless of how the initial configuration was setup, whether through DIP Switch settings or the SNMP Management Module’s configuration.
Application Example
Extend T1/E1/J1 signals up to 80 km over fiber using point to point iMcV-T1/E1/J1 modules. In the example below, PBX traffic from a local office is sent over fiber to a remote data center.
Features Ordering Information
Switch Selectable Protocol
• Operates at (T1/J1 1.544 Mbps) and
(E1 2.048 Mbps)
Two versions to choose from:
• Standard version – offers repeater-like functionality
• Line Terminating version – supports “Telco-like” features, including Alarm Indication Signals
(AIS) and Remote Alarm Indications (RAI)
Management
• Conduct Loopback tests, monitor/manage units via GUI-based iView2
• Remote unit supports secure, out-of-band management
• Diagnostic
Offers more fiber choices
• Available for multi-mode or single-mode fiber
• Single-strand fiber versions
• Supports distances up to 80 km
Eases troubleshooting
• Loopback testing modes, plus SNMP management and LEDs, assist in diagnosing problems on fiber optic or copper networks
• Supports fiber and coax remote loopback control
• Transmit Data Source diagnostic tool sends data as unframed all ones, a pattern of alternating ones and zeros, or a Pseudorandom Bit
Sequence (PRBS). A built-in PRBS signal detector makes testing even easier.
• LED display for monitoring of line diagnostics
IE-iMcV-T1/E1/J1-LineTerm, With
Config Control TP/SFP
850-18100
IE-iMcV-T1/E1/J1-LineTerm, TP/SFP
(requires one SFP/155-ED Module required) iMcV-T1/E1/J1 Repeater Modules
850-14198 iMcV-T1/E1/J1, TP/Fiber-MM850-ST, 2 km
850-14199 iMcV-T1/E1/J1, TP/Fiber-MM850-SC, 2 km
850-14200 iMcV-T1/E1/J1, TP/Fiber-MM1300-ST, 5 km
850-14201 iMcV-T1/E1/J1, TP/Fiber-MM1300-SC, 5 km
850-14202 iMcV-T1/E1/J1, TP/Fiber-SM1310/PLUS-ST, 40 km
850-14203 iMcV-T1/E1/J1, TP/Fiber-SM1310/PLUS-SC, 40 km
850-14204 iMcV-T1/E1/J1, TP/Fiber-SM1310/LONG-ST, 80 km
850-14205 iMcV-T1/E1/J1, TP/Fiber-SM1310/LONG-SC, 80 km
850-14206 iMcV-T1/E1/J1, TP/Fiber-SM1550/LONG-SC, 80 km
Single-Strand Fiber
850-14288 iMcV-T1/E1/J1, TP/SSFiber-MM1310-SC (1310xmt/1550rcv),
2 km
850-14289
850-14290
850-14291
850-14292
850-14293
850-14294
850-14295 iMcV-T1/E1/J1, TP/SSFiber-MM1550-SC (1550xmt/1310rcv),
2 km iMcV-T1/E1/J1, TP/SSFiber-SM1310-SC (1310xmt/1550rcv),
20 km iMcV-T1/E1/J1, TP/SSFiber-SM1550-SC (1550xmt/1310rcv),
20 km iMcV-T1/E1/J1, TP/SSFiber-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km iMcV-T1/E1/J1, TP/SSFiber-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km iMcV-T1/E1/J1, TP/SSFiber-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km iMcV-T1/E1/J1, TP/SSFiber-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-48, ST and SC
Regulatory Approvals:
FCC Class A, UL/cUL, CE, CSA, CB
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Power Rating:
5V
Shipping Weight:
0.30 lbs (0.11 kg) with Config Control Modules
NEW!
850-18101 iMcV-T1/E1/J1-LineTerm TP/Fiber-MM850-ST, 2 km
850-18102 iMcV-T1/E1/J1-LineTerm TP/Fiber-MM850-SC, 2 km
850-18103 iMcV-T1/E1/J1-LineTerm TP/Fiber-MM1300-ST, 5 km
850-18104 iMcV-T1/E1/J1-LineTerm TP/Fiber-MM1300-SC, 5 km
850-18105 iMcV-T1/E1/J1-LineTerm TP/Fiber-SM1310/PLUS-ST, 40 km
850-18106 iMcV-T1/E1/J1-LineTerm TP/Fiber-SM1310/PLUS-SC, 40 km
* 850-18107 iMcV-T1/E1/J1-LineTerm TP/Fiber-SM1310/LONG-ST, 80 km
* 850-18108 iMcV-T1/E1/J1-LineTerm TP/Fiber-SM1310/LONG-SC, 80 km
850-18111 iMcV-T1/E1/J1-LineTerm TP/Fiber-SM1550/LONG-ST, 80 km
Single-Strand Fiber
850-18120
850-18121
850-18122
850-18123 iMcV-T1/E1/J1-LineTerm TP/SSFiber-MM1310-SC
(1310xmt/1550rcv), 2 km iMcV-T1/E1/J1-LineTerm TP/SSFiber-MM1550-SC
(1550xmt/1310rcv), 2 km iMcV-T1/E1/J1-LineTerm TP/SSFiber-SM1310-SC
(1310xmt/1550rcv), 20 km iMcV-T1/E1/J1-LineTerm TP/SSFiber-SM1550-SC
(1550xmt/1310rcv), 20 km
850-18124 iMcV-T1/E1/J1-LineTerm TP/SSFiber-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km
850-18125
850-18126
850-18127 iMcV-T1/E1/J1-LineTerm TP/SSFiber-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km iMcV-T1/E1/J1-LineTerm TP/SSFiber-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km iMcV-T1/E1/J1-LineTerm TP/SSFiber-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
*Certified at 40 km, 80 km is achievable
CWDM versions available,
See website for details
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
31
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
X LINK LINK
X
FIBER
LOS
Link Loss
X X
LOS
Networks
DS3/E3/STS Modular Converters iMcV-DS3/E3/STS
Protocol-selectable DS3/E3/STS Coax-to-
Fiber media converters extend transmission distances over fiber optics and reduces operational costs with remote end management.
Product Overview iMcV-DS3/E3/STS converters are perfect for service providers and enterprise campus networks utilizing DS3/E3/STS coaxial circuits. The modules enable users to convert coax media to single-mode fiber and extend the distance of data transmissions over MAN access networks up to 80 km. The modules support premises networking applications to convert the incoming circuit to fiber for distribution into the structured cabling system.
Choose from versions offering repeater-like functionality or Line-
Terminating functionality, including standards compliant Alarm Indication
Signals (AIS) for signal loss condition propagation.
Features
Switch Selectable Protocol
• Operates at 45 Mbps (DS3), 34 Mbps (E3) or
52 Mbps (STS-1)
• Two versions to choose from:
»
Standard Version - offers repeater-like functionality
»
Line Terminating Version - supports
“Telco” features, including Alarm Indication
Signals (AIS)
Management
• Conduct loopback tests, monitor/manage units via GUI-Based iView² or Web Server
• based V.3.0
• Remote unit supports secure, out-of-band management
LEDs
Supports more fiber choices
• Available for multi-mode or single-mode fiber
• Single-strand fiber versions
• Supports very long fiber distances
Eases Troubleshooting
• Loopback testing modes, plus SNMP management and LEDs, assist in diagnosing problems on fiber optic networks
• Supports fiber and coax remote loopback control
• Internal test-head function for transmitting and detecting PRBS test patterns.
• LED Line Diagnostics
• Supports Far End Fault (FEF)* -
(LineTerm version only)
The iMcV-DS3/E3/STS LineTerm modules are installed as a HOST-
REMOTE pair and can be remotely managed when the HOST is installed in an iMediaChassis with an SNMP–Management Module. This enables network managers to conduct loopback testing, to monitor, and to manage units located up to 80 km away. Since IMC Networks’ management technology functions transparently to the user data, real-time, end-to-end management is provided at all times.
Application Example
Extend DS3 signals up to 80 km over fiber optics using iMcV-DS3/
E3/STS converters
* For telco environments, it is not recommended that the iMcV-DS3/E3/STS converters be installed in an IE-MediaChassis/1-
DC. The power source in this chassis is not isolated, and cannot support positive reference ground systems typically used in Telco environments. The MediaChassis/2-DC and the iMediaChassis/6-DC are suitable alternatives.
*FEF provides a local LED indication when a fault exists at the equipment at the far end of the optical link.
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
BNC, ST and SC
Regulatory Approvals:
FCC Class B, UL/cUL, CE, CSA, CB
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Power Rating:
5V
Shipping Weight:
0.30 lbs (0.11 kg)
CWDM versions available,
See website for details
Ordering Information iMcV-DS3/E3/STS Repeater
Modules
850-14338 iMcV-DS3/E3/STS, BNC/FX-MM850-ST, 2 km
850-14339 iMcV-DS3/E3/STS, BNC/FX-MM850-SC, 2 km
850-14300 iMcV-DS3/E3/STS, BNC/FX-MM1300-ST, 5 km
850-14301 iMcV-DS3/E3/STS, BNC/FX-MM1300-SC, 5 km
850-14302 iMcV-DS3/E3/STS, BNC/FX-SM1310/PLUS-ST, 40 km
850-14303 iMcV-DS3/E3/STS, BNC/FX-SM1310/PLUS-SC, 40 km
850-14304 iMcV-DS3/E3/STS, BNC/FX-SM1310/LONG-ST, 80 km
850-14305 iMcV-DS3/E3/STS, BNC/FX-SM1310/LONG-SC, 80 km
850-14306 iMcV-DS3/E3/STS, BNC/FX-SM1550/LONG-SC, 80 km
Single-Strand Fiber
850-14310 iMcV-DS3/E3/STS, BNC/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
850-14311
850-14312
850-14313 iMcV-DS3/E3/STS, BNC/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km iMcV-DS3/E3/STS, BNC/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km iMcV-DS3/E3/STS, BNC/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km
850-14314 iMcV-DS3/E3/STS, BNC/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
850-14315 iMcV-DS3/E3/STS, BNC/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km iMcV-DS3/E3/STS Line Term
Modules
850-14438 iMcV-DS3/E3/STS-LineTerm, BNC/FX-MM850-ST, 2 km
850-14439 iMcV-DS3/E3/STS-LineTerm, BNC/FX-MM850-SC, 2 km
850-14400 iMcV-DS3/E3/STS-LineTerm, BNC/FX-MM1300-ST, 5 km
850-14401 iMcV-DS3/E3/STS-LineTerm, BNC/FX-MM1300-SC, 5 km
850-14402
850-14403
850-14404 iMcV-DS3/E3/STS-LineTerm, BNC/FX-SM1310/PLUS-ST,
40 km iMcV-DS3/E3/STS-LineTerm, BNC/FX-SM1310/PLUS-SC,
40 km iMcV-DS3/E3/STS-LineTerm, BNC/FX-SM1310/LONG-ST,
80 km
850-14405
850-14406 iMcV-DS3/E3/STS-LineTerm, BNC/FX-SM1310/LONG-SC,
80 km iMcV-DS3/E3/STS-LineTerm, BNC/FX-SM1550/LONG-SC,
80 km
Single-Strand Fiber
850-14410 iMcV-DS3/E3/STS-LineTerm, BNC/SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km
850-14411
850-14412
850-14413
850-14414
850-14415 iMcV-DS3/E3/STS-LineTerm, BNC/SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km iMcV-DS3/E3/STS-LineTerm, BNC/SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km iMcV-DS3/E3/STS-LineTerm, BNC/SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km iMcV-DS3/E3/STS-LineTerm, BNC/SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km iMcV-DS3/E3/STS-LineTerm, BNC/SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
Visit www.imcnetworks.com or www.mediaconverter.com
32
Auto
Negotiation
Managed Auto Cross Fiber Alert
LINK LINK X
FIBER
LOS
X
Link Loss
X X
LOS
Modular, Managed Four E1 Plus Data
Extension Over Fiber iMcV-E1-Mux/4+Ethernet (Enhanced)
The IE-iMcV-E1-Mux/4 Transports Four E1
Extensions and One RS-232 Serial Link Over a
Fiber Optic Line With Optional 1+1 Protection and Full-Bandwidth 10/100 Ethernet Support.
Product Overview
The IE-iMcV-E1-Mux/4 is a managed modular media converter, installed as a Host/Remote pair, that transports four independent E1 lines over a single or dual fiber optic line. The module is ideal for applications requiring TDM extension, such as remote office PABX connectivity, with support for a full bandwidth 10/100BaseT Ethernet connection over the same optical link.
The IE-iMcV-E1-Mux/4 allows for Bandwidth Limiting control in 32 Kbps increments up to 100 Mbps. It also detects Ethernet, AIS, E1 and fiber
LOS events as well as degraded lines with full LED indications including a Remote Alarm Indicator (RAI) over the fiber link. E1 ports can also be enabled or disabled via the CLI, Telnet or SNMP management software, allowing the user to perform maintenance on a particular line without affecting others.
Fiber redundancy (1+1) on removable SFP modules offers the enhanced reliability of a protected fiber link while supporting the complete range of optical types and distances. The 1+1 protection system automatically switches to the best fiber line within 50 milliseconds, should one line become impaired or fail.
The module also features an independent serial link (RS-232) which is carried over the same fiber link(s), and can be used for transporting serial traffic from other equipment located at the remote point of presence (POP) back to the central office. This unit also supports an independent RS-232 console port for local monitoring and configuration of the unit by technical support personnel.
Features
• Four independent E1 ports on RJ-48 connectors with surge protection
• AIS generation on signal loss on all E1 and fiber interfaces
Detection
• Supports local and remote loopback functions
• Dual SFP fiber ports with 1+1 protection switching
• One optional full bandwidth, Ethernet
10/100BaseT port
• User defined bandwidth limiting on
Ethernet port
• Auto Negotiation or forced modes on the Ethernet port
• E1 ports can be remotely disabled by user
• Supports Jumbo Ethernet frames to 1916
• Supports
• AutoCross MDI/MDI-X on Ethernet port
• Supports the Link Fault Pass-Through Function
(LFPT)
• DDMI register retrieval supported on
SFP port
• One end-to-end serial RS-232 port to 120 Kbps on an RJ-45 connector
• Both Host/Remote are managed from the Host unit
• Command Line Interface (CLI) management provided via one MiniJack RS-232 console port
• Remote Graphical User Interface (GUI) management through a managed iMediaChassis
• SNMP Alarm TRAP reporting in managed chassis, including Last Gasp
• Full LED diagnostics on front panel
• IE model supports extended temperature
Fiber Types Supported
• SFP
Connectors:
Four E1 (RJ-48) copper ports
Two SFP slots
One RS-232 on MiniJack
One 10/100BaseT on RJ-45
One RS-232 on RJ-45
Regulatory Approvals:
IEEE-802.3u, ITU G.775 (AIS, LOS), GR-820-CORE
Operating Temperature:
-40°F to 158°F (-40°C to +70°C)
Storage Temperature:
-40°F to +160°F (-40° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
Double-wide chassis module
Power Consumption (Typical):
0.96A @ +5 VDC
Shipping Weight:
1.1 lbs (0.50 kg)
Ordering Information iMcV-E1-Mux/4+Ethernet
(Enhanced) Module (doublewide)
857-18111 iMcV-E1-Mux/4+Ethernet, SFP (requires one or two
SFP/155 Modules), Various
* iMcV-E1-Mux/4+Ethernet Module
(doublewide)
857-14400 iMcV-E1-Mux/4+Ethernet, SFP (requires one or two
SFP/155 Modules), Various
* IE-iMcV-E1-Mux/4+Ethernet
Module (doublewide)
857-18400
IE-iMcV-E1-Mux/4+Ethernet, SFP (requires one or two
SFP/155 Modules), Various
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
* For more information call IMC Networks sales or visit www.imcnetworks.com
Available Accessories
825-39951 Serial Cable MiniJack to DB9(Female)
Application Example
In a typical application, a Customer PABX is provided with up to four
E1 lines from the Public Switch Telephone Network (PSTN) over a protected optical link. In addition, the customer location can receive a full bandwidth, 100BaseT Ethernet connection to the Internet from the local Internet Service Provider (ISP) over the same, protected, optical link. Operation Administration and Management (OAM) functions for the link are provided from the Host location through either a “Console” RS-232 connection on the Host unit or a SNMP connection through the management interface at the Host chassis.
In this example, the RS-232 “Console” port of the remote PABX is also carried back to the Host location for remote management of the customer located PABX, using the end-to-end serial RS-232 port on the iMcV-E1-Mux/4.
33
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
X LINK
LINK
FIBER
LOS
X
Link Loss
X X
LOS
Modular, Managed Four T1 Plus Data
Extension Over Fiber
IE-iMcV-T1-Mux/4 + Ethernet
Features
The IE-iMcV-T1-Mux/4 Transports Four T1
Extensions and One RS-232 Serial Link Over a
Fiber Optic Line With Optional 1+1 Protection and Full-Bandwidth 10/100 Ethernet Support.
Product Overview
The IE-iMcV-T1-Mux/4 is a managed modular media converter, installed as a Host/Remote pair, that transports four independent T1 lines over a single or dual fiber optic line. The module is ideal for applications requiring TDM extension, such as remote office PABX connectivity, with support for a full bandwidth 10/100BaseT Ethernet connection over the same optical link.
The iMcV-T1-Mux/4 detects, Ethernet, T1 and fiber LOS events as well as degraded lines with full LED indications including a Remote Alarm
Indicator (RAI) over the fiber link.
Fiber redundancy (1+1) on removable SFP modules offers the enhanced reliability of a protected fiber link while supporting the complete range of optical types and distances. The 1+1 protection system automatically switches to the best fiber line within 50 milliseconds, should one line become impaired or fail.
• Four independent T1 ports on RJ-48 connectors
• T1 ports can be remotely disabled by user
• AIS generation on signal loss on all
T1 and fiber interfaces
• Supports local and remote loopback functions
• One full bandwidth, 10/100BaseT Ethernet port
• Auto Negotiation or forced modes on the Ethernet port
• Supports Jumbo Ethernet frames to 1916
“Pause”
• User defined bandwidth limiting on Ethernet port
• AutoCross MDI/MDIX on Ethernet port
• Supports the Link Fault Pass-Through Function
(LFPT) on the Ethernet port
• Dual SFP fiber ports with 1+1 protection switching
• DDMI register retrieval supported on SFP ports for enhanced OAM
• B8ZS or AMI T1 line code (T1 ports)
• One end-to-end serial RS-232 port to 125 Kbps on an RJ-45 connector
• Both Host/Remote are managed from the Host unit
• Command Line Interface (CLI) management provided via one
MiniJack RS-232 console port
• Remote Graphical User Interface (GUI) management through a managed iMediaChassis
• SNMP Alarm TRAP reporting in managed chassis, including Last Gasp
• Full LED diagnostics on front panel
Fiber Types Supported
• SFP
Connectors:
Four RJ-48 T1 ports DTE, 120 Ω
Two SFP slots
One RS-232 on MiniJack
One 10/100BaseT on RJ-45
One RS-232 on RJ-45
Regulatory Approvals:
FCC Class B, CE, IEEE-802.3u, ITU-T G.703 (Pulse Shape),
ITU-T G.824 (Jitter), ITU-T-G.775 (AIS, LOS)
Operating Temperature:
32° to 160°F (0° to +70°C)
Storage Temperature:
-40° to +160°F (-40° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
Double-wide chassis module
Power Rating:
4.2W Typical 5.5W Max.
Shipping Weight:
1.1 lbs (0.50 kg)
The IE-iMcV-T1-Mux/4 features an independent serial link (RS-232) which is carried over the same fiber link(s), and can be used for transporting serial traffic from other equipment located at the remote point of presence (POP) back to the central office. The unit also supports an independent RS-232 console port for local monitoring and configuration of the unit by technical support personnel.unit also supports an independent RS-232 console port for local monitoring and configuration of the unit by technical support personnel.
Ordering Information
IE-iMcV-T1-Mux/4 + Ethernet
Module (doublewide)
857-18110
IE-iMcV-T1-Mux/4, SFP (requires one or two SFP/155
Module), Various
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
IE-iMcV-T1-Mux/4 Accessories
825-39951 Serial Cable, MiniJack to DB9 (female)
Application Example
In a typical application, a Customer PABX is provided with up to four E1 lines from the Public Switch Telephone Network (PSTN) In a typical application, a Customer PABX is provided with up to four
T1 lines from the Public Switch Telephone Network (PSTN) over a protected optical link. In addition, the customer location can receive a full bandwidth, 100BaseT Ethernet connection to the Internet from the local Internet Service Provider (ISP) over the same, protected, optical link. Operation Administration and Management (OAM) functions for the link are provided from the Host location through either a “Console” RS-232 connection on the Host unit or a SNMP connection through the management interface at the Host chassis.
In this example, the RS-232 “Console” port of the remote PABX is also carried back to the Host location for remote management of the customer located PABX, using the end-to-end serial RS-232 port on the IE-iMcV-T1-Mux/4.
Visit www.imcnetworks.com or www.mediaconverter.com
34
Networks
Auto
Negotiation
Managed Auto Cross
10/100Base-T Multi-Port Switch Module iMcV-Switch Modules
Monitor all connections from a central site with iMcV Series multi-port switch modules.
Product Overview
The iMcV-Switch is a multi-port, 10/100 Ethernet module that allows the user to increase port density and the service area of
Ethernet networks. The store and forward switch function allows the end user to extend Ethernet service to locations for a total of 100 meters from the Ethernet source. All RJ-45 ports Auto Negotiate
10/100Base-T, half/full duplex, and automatically configure for MDI or MDIX operation. Each port allows a maximum frame size of up to
1916 bytes and supports Flow Control and priority queuing.
Easily view the status of the iMcV-Switch with IMC Networks’ GUIbased iView². iView² runs standalone on Windows NT/XP/2000/Vista, as a standalone Java Application for other operating systems, as a snap-in module for HP OpenView, as a Web Server running under IIS or as a Java Web Servlet. For assistance in selecting the right version of iView² for your operating system, visit our web site at: http://www.imcnetworks.com/products/iView2installers.cfm
Features
• Multi-port 10/100Base-T MAC switch
• Available with 1 or 2 SFP ports, or 1 SC, ST or single-strand fiber port
• Supports up to 1000 MAC address learning
• Supports standard MAC address aging
• Transparent to VLAN tags
• Grants priority for all frames with PRI>4 or
DSCP>32
• Supports Auto Cross and Auto Negotiation on all Tx ports
• Features Collision Detection
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
RJ-45 and SC, ST, LC or SFP
Regulatory Approvals:
FCC Class B, UL/cUL, CE
Operating Temperature:
+32° to +122° F (0° to +50° C)
Storage Temperature:
-4° to +158° F (-20° to +70° C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight:
0.30 lbs (0.11 kg)
Ordering Information iMcV-Switch
852-14440 iMcV-Switch, TX/5, 100 m
852-14441 iMcV-Switch, TX/4 + SFP (requires one SFP/155 module),
852-14442 iMcV-Switch, TX/3 + 2SFP (requires SFP/155 module(s))
852-14443 iMcV-Switch, TX/3 + FX-MM850-ST, 2 km
852-14444 iMcV-Switch, TX/3 + FX-MM850-SC, 2 km
852-14445 iMcV-Switch, TX/3 + FX-MM1300-ST, 5 km
852-14446 iMcV-Switch, TX/3 + FX-MM1300-SC, 5 km
852-14449 iMcV-Switch, TX/3 + FX-SM1310/PLUS-ST, 40 km
852-14450 iMcV-Switch, TX/3 + FX-SM1310/PLUS-SC, 40 km
852-14451 iMcV-Switch, TX/3 + FX-SM1310/LONG-ST, 80 km
852-14452 iMcV-Switch, TX/3 + FX-SM1310/LONG-SC, 80 km
852-14453 iMcV-Switch, TX/3 + FX-SM1550/LONG-SC, 80 km
852-14454 iMcV-Switch, TX/3 + FX-SM1550/XLONG-SC, 100 km
Single-Strand Fiber
852-14470
852-14471
852-14472
852-14473
852-14474
852-14475 iMcV-Switch, TX/3 + SSFX-SM1310-SC
(1310xmt/1550rcv), 20 km iMcV-Switch, TX/3 + SSFX-SM1550-SC
(1550xmt/1310rcv), 20 km iMcV-Switch, TX/3 + SSFX-SM1310/PLUS-SC
(1310xmt/1550rcv), 40 km iMcV-Switch, TX/3 + SSFX-SM1550/PLUS-SC
(1550xmt/1310rcv), 40 km iMcV-Switch, TX/3 + SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km iMcV-Switch, TX/3 + SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
Application Example
The iMcV-Switch allows the user to increase port density and service area of Ethernet networks when installed in an iMediaChassis or MediaChassis. In this example, the iMediaChassis/3-2AC already has an iMcV-VDSL2-
LANextender that provides VDSL connectivity while using existing telephone cabling between destinations such as different floors in the same building over a 100 meter range. With the addition of the iMcV-Switch TX/4 + SFP, one now has five more ports, four copper and one fiber, to accommodate varying applications such as UDP video broadcast, data transmission, data access/archiving and
SNMP that can be transmitted at a distance via fiber.
35
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
X LINK LINK
X
FIBER
LOS
Link Loss
X X
LOS
10/100/1000 Mbps Ethernet Media /
Mode Converter Module
IE-iMcV-MultiWay
A Compact, Versatile, SNMP Manageable
Gigabit Ethernet Device That Offers internal and redundant powering options.
Product Overview
The IE-iMcV-MultiWay is a modular, CPE device providing two fixed
10/100/1000Base-T copper ports and 2 SFP ports. The SFP ports support fiber or copper SFPs. A console port and on-board DIP
Switches provide configuration and mode options for the module.
The IE-iMcV-MultiWay provides OAM functionality with 802.3ah and
802.1ag support on each port. As an Industrial Ethernet device, it supports an extended temperature range of -40° to +85° C.
There are four distinct DIP Switch selectable configurations that the
IE-MultiWay supports. Among them are a 1+1 Uplink Protection Switch, a 4-Port Gigabit Switch, and a Dual Copper to Fiber SFP Media/Mode
Converter (two gigabit fiber media converters in one).
As a 4-port device, it can be deployed with fiber redundancy (with or without 1+1 uplink protection) and status monitoring with management on all ports via SNMP, which offers OAM for mission-critical applications.
It can also be installed as dual 10/100/1000 Mbps copper to fiber media converter and be utilized as two separate converters.
The IE-iMcV-MultiWay supports 10/100/1000 Mbps and 1 Gbps copper and 100 Mbps and 1 Gbps optical SFP modules, to provide greater flexibility in the network environment. The hot-swappable nature of
SFPs and the numerous fiber modes and types that are available allow for easy configuration and future upgrading as network demands evolve.
The IE-iMcV-MultiWay offers a full feature set including Auto Negotiation,
Selective Advertising, AutoCross (on copper ports), VLANs, loopback testing and OAM. Software updates can be downloaded through TFTP or iView2 (iConfig view).
Features
Flexible Solution
• Copper to fiber SFP media converter
• Dual-independent copper to fiber SFP media converter(s)
• Fiber
• SFP to SFP mode converter with copper drops
(Re-amplify, Re-shape, Re-time)
• 4-Port Gigabit Switch
• 1+1 uplink protection (<50 mSec)
• Supports per port service VLAN
• Supports daisy chain expansion
• Supports
• Supports Jumbo Frames (up to 10240 bytes)
• Modular form factor
Advanced Remote Monitoring/Management
• Supports IEEE 802.3ah OAM (active/ passive), and 802.1ag CFM (Connectivity Fault
Management) on all ports
• Discovery, Link Monitoring, Performance
Monitoring and Remote Loopback
• Via UMA, can act as a Remote when connected to a Host iMcV-Giga-FiberLinX-II
• Generates SNMP TRAPs based on events
• RS-232 CLI (Command Line Interface) console port
SFP Support
• Auto negotiate speed and flow control for
10/100/1000 copper SFPs with SGMII
• Supports fixed speed 1 Gbps full-duplex copper
SFPs
• Auto detect for 100 or 1000 optical SFPs
“Industrial Ethernet” (IE) Features
• Extended temperature functionality, up to -40° to +85° C
• Powering options include redundant internal AC powered chassis
Fiber Types Supported
• SFP
Connectors:
RJ-45, 2 SFP
Regulatory Approvals:
• FCC Class A
• UL, cUL, CE
Operating Temperature:
-40° F to +185° F (-40° C to +85° C)
Storage Temperature:
-67 F to +257° F (-55° C to +125° C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight:
0.30 lbs (.11 kg)
Ordering Information
IE-iMcV-MultiWay
858-18121 IE-iMcV-MultiWay Module, 2TX/2SFP, Various
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
Application Example
In the following example, three separate IE-iMcV-MultiWay’s installed in single-slot AC chassis are connecting multiple kiosk’s in a ring-type network utilizing a Spanning Tree enabled switch. The ring topology provides redundancy to the network. If a fiber break were to occur somewhere along any segment, the spanning tree protocol provides an automatic backup link.
Networks
Visit www.imcnetworks.com or www.mediaconverter.com
36
Auto
Negotiation
Managed Auto Cross Fiber Alert
X LINK LINK
X
FIBER
LOS
Link Loss
X X
LOS
10/100 Mbps Ethernet Modular Power Injector
iMcV-PSE-MidSpan
IEEE 802.3af (PoE) compatible, the iMcV-PSE-MidSpan power injector offers unparalleled installation flexibility and cost-savings.
Product Overview
Connecting and powering small devices at the edge of a wired network infrastructure becomes increasingly important to LANs/MANs as they add Wi-Fi access points, webcams, entry control systems and other
IP devices. Sometimes, the most optimal location for one of these devices is too far from an AC or DC power source.
IMC Networks’ iMcV-PSE-MidSpan provides an important and costeffective solution. The PSE-MidSpan delivers data and power to
Ethernet devices over a single Ethernet cable, using Power over
Ethernet (PoE), compliant with IEEE 802.3af. It removes the burden of needing a nearby power outlet and affords greater network flexibility.
The iMcV-PSE-MidSpan can be installed in a multi-port, managed
IMC Networks iMediaChassis chassis, when SNMP management is required. The module’s compact size is also ideal for installation in a single slot chassis, when space is a consideration and management is not required.
Features
The most cost-effective power injector solution available today
• Provides power to remote network devices
• Quality Made
• Supports Class 1, 2, and 3 powered devices
• Compliant with IEEE 802.3af (Power over
Ethernet)
Low Installation Cost
• Avoid separate power and data cable infrastructure and costly AC outlets
• Simple installation means the IT department can do the job - no electrical permits required
Fiber Types Supported
• None
Connectors:
RJ-45
Regulatory Approvals:
FCC Class B, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Power Rating:
3.2A@5V DC Maximum
PoE Output 4, 7 or 15W
Shipping Weight:
0.30 lbs (0.11 kg)
Ordering Information iMcV-PSE-MidSpan Module
857-14910 iMcV-PSE-MidSpan, 100 m
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
* Chassis Restrictions:
A 20-slot iMediaChassis supports up to 11 PSE-MidSpans (with AC power) or 9 PSE-MidSpans (with DC power). This applies only to the
20-slot chassis.
For more information contact IMC Networks sales.
Application Example
The iMcV-PSE-Midspan is ideal for delivering PoE to remote network devices, from a compact rackmountable chassis.
37
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Managed Auto Cross
10/100Base-T, Ethernet over VDSL
IE-iMcV-VDSL2-LANextender
Features
Extend Ethernet services to remote locations or between buildings with Ethernet over Second
Generation VDSL.
Product Overview
VDSL Ethernet LAN extenders enable LAN and campus network managers and service providers to use an existing phone-grade wiring plant to extend 10 Mbps and 100 Mbps Ethernet twisted pair interfaces by using Ethernet over VDSL; the 100 meter distance limitation of twisted pair data cabling is no longer a challenge.
Flexible Solution
• Media and protocol converter - converts
10/100BaseT to VDSL
• Operates over existing CAT3 or other telephone cabling
• Supports VDSL2 for Band Plan 997/998, symmetrical and asymmetrical transmission per
ITU-T G.993.2 standard
Easy to configure and manage with GUI-based iView²
• Automatically adjusts to reach best bandwidth performance for the physical line in use
• Monitor and control all connections
• Displays maximum VDSL bandwidth
• User selectable Trap on VDSL bandwidth level
Eases Troubleshooting
• Link Quality LED displays maximum supported bandwidth
• Overflow LED to display congestion on the VDSL line
Fiber Types Supported
• N/A
Connectors:
RJ-45 and RJ-11
Regulatory Approvals:
FCC Class B, UL/cUL, CSA, CE
Operating Temperature:
-40° F to 185° F (-40° C to +85° C)
Storage Temperature:
-67° to 257°F (-55° to +125°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight:
0.30 lbs (0.11 kg)
Designed with Second Generation VDSL (Very high-bit-rate Digital
Subscriber Line) technology, the IE-iMcV-VDSL2-LANextender allows the transmission of data over sub-standard CAT3 and other telephone cabling to achieve higher data rates than comparable VDSL converters at short distances (less than 100 meters), while supporting asymmetrical data rates on substantially longer lines (greater than 2 km).
Ordering Information
IE-iMcV-VDSL2 LANextender
851-18200 IE-iMcV-VDSL2-LANextender, Refer to Matrix
IE-iMcV-VDSL2-LANextender module includes:
• One VDSL port with an RJ-11 connector
• One 10/100 twisted pair Ethernet port with a RJ-45 connector
• Auto MDI/MDIX, Auto Negotiation and Selective Advertising with Flow
Control on the 10/100 port
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
Distance
300 ft.
1,000 ft.
2,000 ft.
5,000 ft.
Upstream
Data Rate*
Downstream
Data Rate*
Asymmetrical
58 Mbps 100 Mbps
43 Mbps
14 Mbps
0.3 Mbps
85 Mbps
50 Mbps
16 Mbps
Upstream
Data Rate*
Downstream
Data Rate*
84 Mbps
Symmetrical
98 Mbps
61 Mbps
25 Mbps
0.3 Mbps
63 Mbps
37 Mbps
16 Mbps
* Distances and speeds are approximate; actual distances depend on wiring quality and gauge. The distances are less than or equal to the values listed.
* The actual Ethernet speeds are lower than the speeds listed above due to VDSL overhead.
Application Example
In this application the IE-iMcV-VDSL2-LANextender provides data transmission using existing phone-grade wiring such as sub-standard CAT3 or other telephone cabling at a distance greater than 100 m when fiber is either too expensive or unavailable. By utilizing existing cabling to transmit data between floors and with the unit’s built-in auto adjusting link quality (throughput), and improved fault isolation with
Remote Alarm Indicator, Flow Control, and Link Fault Pass-
Through, the unit ensures the connection is maintained as well as the ability to quickly troubleshoot when problems do arise.
38
Networks
Auto
Negotiation
Managed Auto Cross Fiber Alert
X LINK LINK
X
FIBER
LOS
Link Loss
X X
LOS
Protocol Independent Modular
Converters
iMcV-Fiber Mode Converters (iMcV-S2MM, M2MM, S2SM)
The industry’s first protocol-independent fiber mode conversion modules convert between dissimilar fiber modes and wavelengths.
Features
• Includes protocol-independent operation
• Converts between dissimilar fiber modes and wavelengths
Three Types of Mode Conversions:
• Single-mode to Multi-mode (S2MM)
• Single-mode to Single-mode (S2SM)
• Multi-mode to Multi-mode (M2MM)
Two Categories of Transmission Speeds:
• /155: Ethernet, Fast Ethernet and ATM/
OC-3
• /1250: OC-12, Gigabit Ethernet and Fibre
Channel Product Overview
The iMcV-S2MM series of fiber mode converters allows easy network extension to remote locations by converting to single-mode fiber— without having to replace existing multi-mode fiber equipment.
Protocol-independent operation means the S2MM series gets the job done: from Ethernet to Fast Ethernet and ATM/OC-3 choose the S2MM/155 series; for OC-12, Gigabit Ethernet and Fibre Channel, choose the
S2MM/1250 series. This series also includes multi-mode to multi-mode
(M2MM) and single-mode to long-haul single-mode (S2SM) converters for specialty data networking applications.
Physical Specifications
Fiber Types Supported
• 50/125μm or 62.5/125μm multi-mode fiber
• 9/125μm single-mode fiber
• Available for single-strand fiber
Connectors:
ST, SC, LC
Regulatory Approvals:
FCC Class B, CE
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-13° to +158°F (-25° to +70°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight:
0.30 lbs (0.11 kg)
The iMcV Fiber Mode Converter series is SNMP-manageable to aid in network troubleshooting with modular architecture for flexibility. This series is available with single-strand fiber technology, transmitting two-channel, full duplex data on just one strand of fiber.
Ordering Information iMcV-S2MM/155 (Single-mode to Multi-mode)
850-14520 iMcV-S2MM/155, SM1310/PLUS-ST + MM1300-ST, 40 km + 5 km
850-14530 iMcV-S2MM/155, SM1310/PLUS-SC + MM1300-SC, 40 km + 5 km
850-14540 iMcV-S2MM/155, SM1310/LONG-ST + MM1300-ST, 40 km + 5 km
850-14550 iMcV-S2MM/155, SM1310/LONG-SC + MM1300-SC, 40 km + 5 km
850-14555 iMcV-S2MM/155, SM1550/LONG-SC + MM1300-SC, 80 km + 5 km
850-14560 iMcV-S2MM/155, SM1310/PLUS-ST + MM850-ST, 40 km + 2 km
850-14570 iMcV-S2MM/155, SM1310/PLUS-SC + MM850-SC, 40 km + 2 km
850-14580 iMcV-S2MM/155, SM1310/LONG-ST + MM850-ST, 40 km + 2 km
850-14590 iMcV-S2MM/155, SM1310/LONG-SC + MM850-SC, 40 km + 2 km
850-14595 iMcV-S2MM/155, SM1550/LONG-SC + MM850-SC, 80 km + 2 km
Single-Strand Fiber
850-14532 iMcV-S2MM/155, SSFX-SM1310-SC (1310xmt/1550rcv) + MM1300-SC, 20 km + 5 km
850-14533 iMcV-S2MM/155, SSFX-SM1550-SC (1550xmt/1310rcv) + MM1300-SC , 20 km + 5 km
850-14535 iMcV-S2MM/155, SSFX-SM1310/PLUS-SC (1310xmt/1550rcv) + MM1300-SC , 40 km + 5 km
850-14536 iMcV-S2MM/155, SSFX-SM1550/PLUS-SC (1550xmt/1310rcv) + MM1300-SC , 40 km + 5 km iMcV-S2MM/1250 (Single-mode to Multi-mode)
859-14799 iMcV-S2MM/1250, LX-SM1310-SC + SX-MM850-SC, 15 km + 220/550 m
859-14800 iMcV-S2MM/1250, LX-SM1310/PLUS-SC + SX-MM850-SC, 40 km + 220/550 m
859-14801 iMcV-S2MM/1250, LX-SM1550/LONG-SC + SX-MM850-SC, 80 km + 220/550 m
Single-Strand Fiber
859-14806 iMcV-S2MM/1250, SSLX-SM1310-SC (1310xmt/1550rcv) + SX-MM850-SC, 15 km + 220/550 m
859-14807 iMcV-S2MM/1250, SSLX-SM1550-SC (1550xmt/1310rcv) + SX-MM850-SC, 15 km + 220/550 m
859-14808 iMcV-S2MM/1250, SSLX-SM1310/PLUS-SC (1310xmt/1550rcv) + SX-MM850-SC, 40 km + 220/550 m
859-14809 iMcV-S2MM/1250, SSLX-SM1550/PLUS-SC (1550xmt/1310rcv) + SX-MM850-SC, 40 km + 220/550 m iMcV-S2SM (Single-mode to Single-mode)
850-14519
850-14505 iMcV-S2SM/155, SM1310/PLUS-SC + SM1310/PLUS-SC, 40 km + 40 km iMcV-S2SM/155, SM1310/LONG-SC + SM1310/LONG-SC, 40 km + 40 km
850-14513 iMcV-S2SM/155, SM1550/LONG-SC + SM1310/PLUS-SC, 80 km + 40 km
850-14514-LC iMcV-S2SM/155, SM1550/LONG-SC + SM1310/LONG-LC, 80 km + 40 km
Single-Strand Fiber
850-14515 iMcV-S2SM/155, SSFX-SM1310-SC (1310xmt/1550rcv) + SM1310/PLUS-SC, 20 km + 40 km
850-14516
850-14517
850-14518 iMcV-S2SM/155, SSFX-SM1550-SC (1550xmt/1310rcv) + SM1310/PLUS-SC, 20 km + 40 km iMcV-S2SM/155, SSFX-SM1310/PLUS-SC (1310xmt/1550rcv) + SM1310/LONG-SC, 40 km + 80 km iMcV-S2SM/155, SSFX-SM1550/PLUS-SC (1550xmt/1310rcv) + SM1310/LONG-SC, 40 km + 80 km iMcV-S2SM/1250 (Single-mode to Single mode)
859-14803
859-14804 iMcV-S2SM/1250, LX-SM1310/PLUS-SC + LX-SM1310/PLUS-SC, 40 km + 40 km iMcV-S2SM/1250, LX-SM1310/PLUS-SC + LX-SM1550/LONG-SC, 40 km + 80 km
Single-Strand Fiber
859-14820 iMcV-S2SM/1250, SSLX-SM1310-SC (1310xmt/1550rcv) + LX-SM1310/PLUS-SC, 15 km + 40 km
859-14821
859-14822 iMcV-S2SM/1250, SSLX-SM1550-SC (1550xmt/1310rcv) + LX-SM1310/PLUS-SC, 15 km + 40 km iMcV-S2SM/1250, SSLX-SM1310/PLUS-SC (1310xmt/1550rcv) + LX-SM1310/PLUS-SC, 40 km + 40 km
859-14823 iMcV-S2SM/1250, SSLX-SM1550/PLUS-SC (1550xmt/1310rcv) + LX-SM1310/PLUS-SC, 40 km + 40 km iMcV-M2MM/155 (Multi-mode to Multi-mode)
850-14510
850-14511 iMcV-M2MM/155, MM1300-ST + MM850-ST, 5 km + 2 km iMcV-M2MM/155, MM1300-SC + MM850-SC, 5 km + 2 km
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
39
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Auto
Negotiation
Auto Cross Industrial
Ethernet
100 Mbps to 2.4 Gbps Fiber
Mode Converter
IE-ModeConverter SFP/SFP
Connect network segments running different fiber types using interchangeable SFP modules.
Product Overview
Mode converters allow network operators to incorporate multiple fiber types within a network. The IE-ModeConverter provides the ability to accomplish this by working with existing equipment and thus, eliminating replacement costs. By converting between single-mode and multi-mode fiber, one can easily extend network range to reach more remote locations. Additionally, since the IE-ModeConverter is an
Industrial Ethernet device (IE), the unit operates in environments that demand extended operating temperatures.
The IE-ModeConverter uses SFP modules to provide greater fiber flexibility in the network environment. The hot-swappable nature of the SFPs and the numerous fiber modes and types available in SFPs allow for easy configuration and future upgrading as network demands evolve.
The IE-ModeConverter requires two fiber optic SFP modules to operate. The SFP modules must be MSA compliant and support the same speed range. The IE-ModeConverter operates as a mode converter only and not as a rate converter.
Application Examples
In this example, the IE-ModeConverter converts a local multi-mode fiber signal to a single-mode fiber signal to integrate into an area of the network that supports this type of fiber. The IE-ModeConverter has been equipped with a multi-mode fiber SFP and a single-mode fiber SFP.
Features
Cost-effective and flexible
• Interchangeable SFP modules allow for multiple fiber mode/type conversion options
(single mode, multi-mode, long haul, short haul, etc.)
• Extended operating temperatures
• Multiple mounting options (desktop,
DIN rail, IE-PowerTray/18-AC (for high density installations))
• Compact size conserves space
• AC or DC powering options
• Ideal for use with IMC Networks’ SFPs
Protocol-Independent
• Supports a full range of SFP Modules offering various transmission speeds, from 10 Mbps to 2.4 Gbps
• Supports OC3, OC12, OC48
Maximizes network uptime
• SFP Modules are hot-swappable; no need to power-down chassis when upgrading or trouble-shooting a single module
Physical Specifications
Fiber Types Supported
SFP
Connectors:
SFP Slots
Regulatory Approvals:
FCC Class B, UL/cUL, CSA, CE, CB
Operating Temperature:
-13° to +185°F(-25° to +85°C) DC Configuration
-4° to 158°F(-20° to +70°C) W/IE-Power 5V
+14° to +122°F(-10° to +50°C) W/AC Wall Adapter
Storage Temperature:
-49° to +185°F (-45° to +85°C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.83”H x 1.80”W x 3.35”D (2.11 x 4.57 x 8.51 cm)
Power Rating:
AC Wall Adapter: 100-240V AC input, 5V DC output
@ 10W, 2.0A
DC Input Voltage: 7 to 50V DC @ 2.5W Chassis grounded to negative terminal
Maximum 3.3W of combined power to both SFPs
Shipping Weight:
0.25 lbs (0.11 kg)
Ordering Information
IE-ModeConverter SFP/SFP with
AC Adapter
855-19619 IE-ModeConverter, SFP/SFP
IE-ModeConverter SFP/SFP without AC Adapter
854-19619 IE-ModeConverter, SFP/SFP
Available Accessories &
IE-PowerTray/18 Chassis
See Page 12
40
Networks
Auto
Negotiation
Auto Cross Industrial
Ethernet
Modular Protocol-Independent, Fiber Mode
Converter via SFP Modules
IE-iMcV-ModeConverter SFP/SFP
Connect network segments running different fiber types using IMC Networks’ interchangeable SFP modules.
Product Overview
The IE-iMcV-ModeConverter is an SNMP manageable module that allows network operators to incorporate multiple fiber types and wavelengths within a network. It installs in the modular,
SNMP-manageable iMediaChassis series and in the unmanaged
MediaChassis series.
The IE-iMcV-ModeConverters are protocol-independent with dual
SFP ports which can provide a single conversion between different wavelengths or single-mode and multimode fiber, single-mode to single-mode fiber or multimode to single-strand single-mode fiber. The
IE-iMcVModeConverter modules support a variety of user configurable features such as LinkLoss and variable speed SFPs. Additionally, since the IE-iMcV-ModeConverter is an Industrial Equipment (IE) device, the unit operates in environments that demand extended operating temperatures.
Ordering Information provide greater fiber flexibility in the network environment. The hotswappable nature of SFPs and the numerous fiber modes and types that are available allow for easy configuration and future upgrading as network demands evolve.
Features
Cost-effective and flexible
• Interchangeable SFP modules allow for multiple fiber mode/type conversion options
(single-mode, multi-mode, single-strand, long haul, short haul, etc.)
• Extended operating temperatures
• DDMI enabled SFPs support SNMP when installed in a compatible managed chassis
• Modular, hot-swappable architecture reduces operational costs associated with product installation, upgrades and maintenance
• Ideal for use with IMC Networks’ SFPs
Protocol-Independent
• Supports a full range of SFP modules offering various transmission speeds, from 10
Mbps up to 2.4 Gbps*
Maximizes network uptime
• Modules are hot-swappable; no need to power-down chassis when upgrading or trouble-shooting a single module
• User selectable FX LinkLoss enables the operator to identify a cable fault/failure to isolate the fault to the specific fiber that has failed
Physical Specifications
Fiber Types Supported
• SFP
Connectors:
SFP Slots
Regulatory Approvals:
FCC Class A, UL/cUL, CE
Operating Temperature:
-40° to +185° F (-40° to +85° C)
Storage Temperature:
-40° to +185° F (-40° to +85° C)
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
4.19” x 0.78” x 2.75” (10.6 cm x 1.98 cm x 6.99 cm)
Power Rating:
Maximum 3.3W of combined power to both SFPs
Shipping Weight:
0.25 lbs (0.11 kg)
Ordering Information
IE-iMcV-ModeConverter SFP/SFP
850-19500 IE-iMcV-ModeConverter, SFP/SFP
Use with Chassis Platform iMediaChassis Series, See Page 45
MediaChassis Series, See Page 46
IE-MediaChassis Series, See Page 46
Application Examples
In this example, both single-mode and multi-mode fiber are deployed with the IE-iMcV-ModeConverter conveniently and seamlessly located at the origin and destination. The extended temperature range is ideal for the manufacturing location, housed in the unmanaged MediaChassis/1 converting between single-mode and multi-mode fiber for transmission at a distance to another IE-iMcV-ModeConverter, housed in a SNMP-managed iMediachassis/20 along with other modules.
41
Networks
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Industrial
Ethernet
100 Mbps Fast Ethernet
IE-SFP 100 to 155 Mbps (OC-3) Modules
Plug in more fiber types and maximize network hardware.
Product Overview
The use of IE-SFP modules makes changing fiber requirements within the locations of the network environment easy. IE-SFPs offer the flexibility of choosing fiber types, and also provide diagnostic information to assist the end user in the identification and troubleshooting of the pluggable modules.
All IE-SFPs are compliant with the Multi-Source Agreement (MSA), ensuring compatibility with a wide range of networking equipment.
All products are made in the USA except SFP products.
Features
Fiber or copper versions available
All SFP Modules
• Multi-source package with Duplex LC connector
• Eye Safety designed to meet Laser Class 1 compliance with
IEC 60825-1
• Compliant with ITU-T-G.957, G.958, IEEE 802.3u and 802.3z
• Single +3.3V power supply
• Hot-pluggable
• Complies with Telcordia GR-468-CORE
• All SFP modules report standard information such as:
» SFP Type
»
Fiber Link Length
» Wavelength
»
Bit Rate
» Date Code
»
Serial Number
Extended Diagnostics (DDMI)
• Complying with SFF-8472, IE-SFP modules that include
Extended Diagnostics also report information such as:
»
Temperature
»
Voltage
»
Bias Current
» TX Power
»
RX Power
Fiber
Operating temperature:
-40°C to +85°C (-40° F to +185° F)
155 Mbps Ethernet SFP Modules
1.25 Gbps Ethernet SFP Modules
2.4 Gbps Ethernet SFP Modules
Copper
Operating temperature:
0°C to +85°C (+32° F to +185° F)
10/100/1000 Mbps SFP Modules
1000 Mbps SFP Modules
Ordering Information
With DDMI
IE-SFP/155-ED
808-38101 IE-SFP/155-ED, MM850-LC, 2 km
808-38102 IE-SFP/155-ED, MM1300-LC, 2 km
808-38103 IE-SFP/155-ED, SM1310-LC, 20 km
808-38104 IE-SFP/155-ED, SM1310/PLUS-LC, 40 km
808-38105 IE-SFP/155-ED, SM1550/LONG-LC, 80 km
Single-Strand Fiber
808-38121
808-38122
808-38123
808-38124
IE-SFP/155-ED, SSFX-SM1310-SC (1310xmt/1550rcv),
20 km
IE-SFP/155-ED, SSFX-SM1550-SC (1550xmt/1310rcv),
20 km
IE-SFP/155-ED, SSFX-SM1310/PLUS-SC (1310xmt/1550rcv),
40 km
IE-SFP/155-ED, SSFX-SM1550/PLUS-SC (1550xmt/1310rcv),
40 km
808-38125
808-38126
808-38127
808-38128
IE-SFP/155-ED, SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
IE-SFP/155-ED, SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
IE-SFP/155-ED, SSFX-SM1490/XLONG-SC
(1490xmt/1550rcv), 80 km
IE-SFP/155-ED, SSFX-SM1550/XLONG-SC
(1550xmt/1490rcv), 80 km
With LC Connector
808-38521
808-38522
808-38523
808-38524
808-38529
808-38530
808-38527
808-38528
IE-SFP/155-ED, SSFX-SM1310-LC
(1310xmt/1550rcv), 20 km
IE-SFP/155-ED, SSFX-SM1550-LC
(1550xmt/1310rcv), 20 km
IE-SFP/155-ED, SSFX-SM1310/PLUS-LC
(1310xmt/1550rcv), 40 km
IE-SFP/155-ED, SSFX-SM1550/PLUS-LC
(1550xmt/1310rcv), 40 km
IE-SFP/155-ED, SSFX-SM1310/LONG-LC
(1310xmt/1550rcv), 60 km
IE-SFP/155-ED, SSFX-SM1550/LONG-LC
(1550xmt/1310rcv), 60 km
IE-SFP/155-ED, SSFX-SM1490/XLONG-LC
(1490xmt/1550rcv), 80 km
IE-SFP/155-ED, SSFX-SM1550/XLONG-LC
(1550xmt/1490rcv), 80 km
Copper (Twisted Pair) Modules
Cisco Compatible
808-39001 808-39001CC
808-39010 808-39010CC
SFP/10-1250, TX, 100 m
SFP/1250, TX, 100 m
Without DDMI
IE-SFP/155
808-38111 IE-SFP/155, MM850-LC, 2 km
808-38112 IE-SFP/155, MM1300-LC, 2 km
808-38113 IE-SFP/155, SM1310-LC, 20 km
808-38114 IE-SFP/155, SM1310/PLUS- LC, 40 km
808-38115 IE-SFP/155, SM1550/LONG-LC, 80 km
Single-Strand Fiber
808-38131 IE-SFP/155, SSFX-SM1310-SC (1310xmt/1550rcv), 20 km
808-38132 IE-SFP/155, SSFX-SM1550-SC (1550xmt/1310rcv), 20 km
808-38133
808-38134
808-38135
808-38136
808-38137
808-38138
IE-SFP/155, SSFX-SM1310/PLUS-SC (1310xmt/1550rcv),
40 km
IE-SFP/155, SSFX-SM1550/PLUS-SC (1550xmt/1310rcv),
40 km
IE-SFP/155, SSFX-SM1310/LONG-SC
(1310xmt/1550rcv), 60 km
IE-SFP/155, SSFX-SM1550/LONG-SC
(1550xmt/1310rcv), 60 km
IE-SFP/155, SSFX-SM1490/XLONG-SC
(1490xmt/1550rcv), 80 km
IE-SFP/155, SSFX-SM1550/XLONG-SC
(1550xmt/1490rcv), 80 km
With LC Connector
808-38531
808-38532
808-38533
808-38534
808-38539
808-38540
808-38537
808-38538
IE-SFP/155, SSFX-SM1310-LC
(1310xmt/1550rcv), 20 km
IE-SFP/155, SSFX-SM1550-LC
(1550xmt/1310rcv), 20 km
IE-SFP/155, SSFX-SM1310/PLUS-LC
(1310xmt/1550rcv), 40 km
IE-SFP/155, SSFX-SM1550/PLUS-LC
(1550xmt/1310rcv), 40 km
IE-SFP/155, SSFX-SM1310/LONG-LC
(1310xmt/1550rcv), 60 km
IE-SFP/155, SSFX-SM1550/LONG-LC
(1550xmt/1310rcv), 60 km
IE-SFP/155, SSFX-SM1490/XLONG-LC
(1490xmt/1550rcv), 80 km
IE-SFP/155, SSFX-SM1550/XLONG-LC
(1550xmt/1490rcv), 80 km
CWDM versions available,
See website for details
42
Networks
Industrial
Ethernet
1.25 Gbps Gigabit Ethernet
(OC-24)
IE-SFP 1250 Mbps/1.25 Gbps (OC-24) Modules
Fiber
Operating temperature:
-40°C to +85°C (-40° F to +185° F)
155 Mbps Ethernet SFP Modules
1.25 Gbps Ethernet SFP Modules
2.4 Gbps Ethernet SFP Modules
Plug in more fiber types and maximize network hardware.
Product Overview
The use of IE-SFP modules makes changing fiber requirements within the locations of the network environment easy. IE-SFPs offer the flexibility of choosing fiber types, and also provide diagnostic information to assist the end user in the identification and troubleshooting of the pluggable modules.
All IE-SFPs are compliant with the Multi-Source Agreement (MSA), ensuring compatibility with a wide range of networking equipment.
All products are made in the USA except SFP products.
Features
All SFP Modules
• Multi-source package with Duplex LC connector
• Eye Safety designed to meet Laser Class 1 compliance with
IEC 60825-1
• Compliant with ITU-T-G.957, G.958, IEEE 802.3u and 802.3z
• Single +3.3V power supply
• Hot-pluggable
• Complies with Telcordia GR-468-CORE
• All SFP modules report standard information such as:
»
SFP Type
» Fiber Link Length
»
Wavelength
» Bit Rate
»
Date Code
» Serial Number
Extended Diagnostics (DDMI)
• Complying with SFF-8472, IE-SFP modules that include
Extended Diagnostics also report information such as:
»
Temperature
» Voltage
»
Bias Current
»
TX Power
»
RX Power
43
Ordering Information
With DDMI
IE-SFP/1250-ED
Cisco Compatible
808-38201 808-38201CC
808-38206
808-38200 808-38200CC
808-38203 808-38203CC
808-38204
808-38205
808-38208
Single-Strand Fiber
808-38221
808-38222
808-38227 808-38227CC
808-38228 808-38228CC
808-38223
808-38224
808-38229
808-38230
808-38225
808-38226
with LC connectors
IE-SFP/1250-ED, MM850-LC, 220/550 m
IE-SFP/1250-ED, MM1300-LC, 2 km
IE-SFP/1250-ED, SM1310-LC, 20 km
IE-SFP/1250-ED, SM1310/PLUS-LC, 30 km
IE-SFP/1250-ED, SM1550/LONG-LC, 40 km
IE-SFP/1250-ED, SM1550/XLONG-LC, 70 km
IE-SFP/1250-ED, SM1550/XXLONG-LC (IE = -20°C to +85°C), 120 km
IE-SFP/1250-ED, SSLX-SM1310-SC (1310xmt/1550rcv), 20 km
IE-SFP/1250-ED, SSLX-SM1550-SC (1550xmt/1310rcv), 20 km
IE-SFP/1250-ED, SSBX-SM1310-SC (1310xmt/1490rcv), 10 km
IE-SFP/1250-ED, SSBX-SM1490-SC (1490xmt/1310rcv), 10 km
IE-SFP/1250-ED, SSLX-SM1310/PLUS-SC (1310xmt/1550rcv), 40 km
IE-SFP/1250-ED, SSLX-SM1550/PLUS-SC (1550xmt/1310rcv), 40 km
IE-SFP/1250-ED, SSBX-SM1310/PLUS-SC (1310xmt/1490rcv), 40 km
IE-SFP/1250-ED, SSBX-SM1490/PLUS-SC (1490xmt/1310rcv), 40 km
IE-SFP/1250-ED, SSLX-SM1490/LONG-SC (1490xmt/1550rcv), 70 km
IE-SFP/1250-ED, SSLX-SM1550/LONG-SC (1550xmt/1490rcv), 70 km
808-38721
808-38722
808-38727 808-38727CC
808-38728 808-38728CC
808-38723
808-38724
808-38729
808-38730
808-38725
808-38726
IE-SFP/1250-ED, SSLX-SM1310-LC (1310xmt/1550rcv), 20 km
IE-SFP/1250-ED, SSLX-SM1550-LC (1550xmt/1310rcv), 20 km
IE-SFP/1250-ED, SSBX-SM1310-LC (1310xmt/1490rcv), 15 km
IE-SFP/1250-ED, SSBX-SM1490-LC (1490xmt/1310rcv), 15 km
IE-SFP/1250-ED, SSLX-SM1310/PLUS-LC (1310xmt/1550rcv), 40 km
IE-SFP/1250-ED, SSLX-SM1550/PLUS-LC (1550xmt/1310rcv), 40 km
IE-SFP/1250-ED, SSBX-SM1310/PLUS-LC (1310xmt/1490rcv), 30 km
IE-SFP/1250-ED, SSBX-SM1490/PLUS-LC (1490xmt/1310rcv), 30 km
IE-SFP/1250-ED, SSLX-SM1490/LONG-LC (1490xmt/1550rcv), 70 km
IE-SFP/1250-ED, SSLX-SM1550/LONG-LC (1550xmt/1490rcv), 70 km
Without DDMI
IE-SFP/1250
808-38211 IE-SFP/1250, MM850-LC, 220/550 m
808-38212 IE-SFP/1250, SM1310-LC, 10 km
808-38213 IE-SFP/1250, SM1310/PLUS-LC, 30 km
808-38214 IE-SFP/1250, SM1550/LONG-LC, 40 km
808-38215 IE-SFP/1250, SM1550/XLONG-LC, 70 km
808-38218 IE-SFP/1250c SM1550/XXLONG-LC (IE = -20° C to + 85° C), 120 km
Single-Strand Fiber
808-38231 IE-SFP/1250, SSFX-SM1310-SC (1310xmt/1550rcv), 20 km
808-38232 IE-SFP/1250D, SSFX-SM1550-SC (1550xmt/1310rcv), 20 km
808-38233 IE-SFP/1250, SSFX-SM1310/PLUS-SC (1310xmt/1550rcv), 40 km
808-38234 IE-SFP/1250, SSFX-SM1550/PLUS-SC (1550xmt/1310rcv), 40 km
808-38235 IE-SFP/1250, SSFX-SM1490/LONG-SC (1490xmt/1550rcv), 70 km
808-38236 IE-SFP/1250, SSFX-SM1550/LONG-SC (1550xmt/1490rcv), 70 km CWDM versions available,
See website for details
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Networks
Industrial
Ethernet
2.4 Gbps Ethernet (OC-48) &
10 Gbps (OC-192)
IE-SFP 2.4 Gbps (OC-48) and 10 Gbps (OC-192) Modules
Fiber
Operating temperature:
-40°C to +85°C (-40° F to +185° F)
155 Mbps Ethernet SFP Modules
1.25 Gbps Ethernet SFP Modules
2.4 Gbps Ethernet SFP Modules
Plug in more fiber types and maximize network hardware.
Ordering Information
Product Overview
The use of IE-SFP modules makes changing fiber requirements within the locations of the network environment easy. IE-SFPs offer the flexibility of choosing fiber types, and also provide diagnostic information to assist the end user in the identification and troubleshooting of the pluggable modules.
All IE-SFPs are compliant with the Multi-Source Agreement (MSA), ensuring compatibility with a wide range of networking equipment.
All products are made in the USA except SFP products.
Features
All SFP Modules
• Multi-source package with Duplex LC connector
• Eye Safety designed to meet Laser Class 1 compliance with
IEC 60825-1
• Compliant with ITU-T-G.957, G.958, IEEE 802.3u and 802.3z
• Single +3.3V power supply
• Hot-pluggable
• Complies with Telcordia GR-468-CORE
• All SFP modules report standard information such as:
»
SFP Type
» Fiber Link Length
»
Wavelength
» Bit Rate
»
Date Code
» Serial Number
Extended Diagnostics (DDMI)
• Complying with SFF-8472, IE-SFP modules that include
Extended Diagnostics also report information such as:
»
Temperature
»
Voltage
»
Bias Current
» TX Power
»
RX Power
With DDMI
IE-SFP/2.4-ED
808-38301 IE-SFP/2.4-ED, MM850-LC, 300 m
808-38302 IE-SFP/2.4-ED, SM1310-LC, 2 km
808-38303 IE-SFP/2.4-ED, SM1310/PLUS-LC, 15 km
808-38304 IE-SFP/2.4-ED, SM1550/LONG-LC, 40 km
Single-Strand Fiber
808-38311 IE-SFP/2.4-ED, SSLX-SM1310-LC (1310xmt/1550rcv), 10 km
808-38312 IE-SFP/2.4-ED, SSLX-SM1550-LC (1550xmt/1310rcv), 10 km
808-38313 IE-SFP/2.4-ED, SSLX-SM1310/PLUS-LC (1310xmt/1550rcv), 20 km
808-38314 IE-SFP/2.4-ED, SSLX-SM1550/PLUS-LC (1550xmt/1310rcv), 20 km
808-38315 IE-SFP/2.4-ED, SSLX-SM1310/LONG-LC (1310xmt/1550rcv), 40 km
808-38316 IE-SFP/2.4-ED, SSLX-SM1550/LONG-LC (1550xmt/1310rcv), 40 km
Without DDMI
IE-SFP/2.4
808-38321 IE-SFP/2.4, MM850-LC, 300 m
808-38322 IE-SFP/2.4, SM1310-LC, 2 km
808-38323 IE-SFP/2.4, SM1310/PLUS-LC, 15 km
808-38324 IE-SFP/2.4, SM1550/LONG-LC, 40 km
Single-Strand Fiber
808-38331 IE-SFP/2.4, SSLX-SM1310-LC (1310xmt/1550rcv), 10 km
808-38332 IE-SFP/2.4, SSLX-SM1550-LC (1550xmt/1310rcv), 10 km
808-38333 IE-SFP/2.4, SSLX-SM1310/PLUS-LC (1310xmt/1550rcv), 20 km
808-38334 IE-SFP/2.4, SSLX-SM1550/PLUS-LC (1550xmt/1310rcv), 20 km
808-38335 IE-SFP/2.4, SSLX-SM1310/LONG-LC (1310xmt/1550rcv), 40 km
808-38336 IE-SFP/2.4, SSLX-SM1550/LONG-LC (1550xmt/1310rcv), 40 km
With DDMI
IE-SFP/10 Gbps
808-38600 IE-SFP+ SR/10G-ED, MM850-LC, 33 m
808-38601 IE-SFP+ LR/10G-ED, SM1310-LC, 10 km
With DDMI
IE-XFP/10 Gbps
808-38610 IE-XFP SR/10G-ED, MM850-LC, 33 m
808-38611 IE-XFP LR/10G-ED, SM1310-LC, 10 km
808-38612 IE-XFP ER/10G-ED, SM1550-LC, 40 km
808-38613.
IE-XFP ZR/10G-ED, SM1550/PLUS-LC, 80 km
CWDM versions available,
See website for details
44
Networks
Managed Chassis iMediaChassis
The iMediaChassis line provides SNMP management capabilities when used in conjunction with the SNMP Module.
Version
# of Slots
Power Specs
Operating Temp
Storage Temp
Humidity
Dimensions iMediaChassis/20 iMediaChassis/6
20 + 1 SNMP 6 + 1 SNMP iMediaChassis/3
3 + 1 SNMP
Redundant AC and DC Field replaceable
AC Power Supply: 100-240V AC, 50/60Hz,
3A/1.5A
Redundant AC and DC
Field replaceable
AC Power Supply: 100-240V AC,
50/60Hz, 1A
AC and DC
Not field replaceable
AC Power Supply: 100-240V AC, 50/60Hz, 0.75A
DC power Supply: -48V DC, 5A
ACDC Power: 100-240V AC, 50/60Hz, 2A, -48V
DC, 4.4A
DC power Supply: -48V DC, 2A DC power Supply: 35V DC to 75V DC, 1.6A
+32° to +122°F (0° to +50°C)
Dual AC & ACDC Temp: -4° to +176°F (-20° to +80°C)
Dual DC Temp: -4° to +140°F (-20° to +60°C)
AC Temp: -130° to +122°F (-25° to
+50°C)
DC Temp: -40° to +212°F (-40° to
+100°C)
AC Temp: -40° to +185°F (-40° to +85°C)
DC Temp: -55° to +257°F (-55° to
+125°C)
5% to 95%, non-condensing, 0 – 10,000 ft altitude
AC Temp: +32° to +122°F (0° to +50°C)
DC Temp: -67° to +122°F (-40° to +50°C)
AC Temp: -40° to +185°F (-40° to +85°C)
DC Temp: -40° to +212°F (-55° to +125°C)
5.20”H x 19”W x 13.80”D
(13.21 cm x 48.26 cm x 35.05 cm)
1.75”H x 17.35”W x 10.65”D
(4.45 cm x 44.07 cm x 27.05 cm)
1.73"H x 7.50"W x 8.74”D
(4.44 cm x 19.0 cm x 22.0 cm)
Regulatory
UL/cUL, CSA, CE, CB
Product
Description
Version FCC
Class
A iMediaChassis/20 iMediaChassis/6 iMediaChassis/3
AC
2AC
DC
2DC
ACDC
Dual AC
Dual DC
ACDC
AC
Dual AC
DC
Dual DC
X
X
FCC
Class
B
X
X
X
X
X
X
X
X
X
X
iMediaChassis/3
850-10949-AC
850-10949-2AC
850-10949-DC
850-10949-2DC
850-10949-ACDC
1 fixed AC power supply
2 fixed AC power supplies
1 fixed DC power supply
2 fixed DC power supplies
1 fixed AC and 1 fixed DC power supply
iMediaChassis/6
850-10953-AC
850-10953-2AC
850-10953-DC
850-10953-2DC
Includes 1 AC power supply module with option for 2nd power supply
Includes 2 AC power supply modules
Includes 1 DC power supply module with option for 2nd power supply
Includes 2 power supply modules
iMediaChassis/20
850-10960-2AC
850-10952-AC
850-10960-2DC
850-10960-ACDC
Includes 2 AC power supply modules
Includes single fixed AC power supply module
Includes 2 DC power supply modules
Includes 1 AC, 1 DC power module
Accessories
SNMP Module
850-39950 iMediaChassis SNMP Management Module
*An SNMP module is required to utilize full SNMP functionality in the iMediaChassis family.
Serial Cable and Adapters
825-39950 Serial Cable, DB9 (Male) to DB9 (Female) 825-39500
Power Supplies for iMediaChassis/6
806-39125-AC PS/125-AC Module, for iMediaChassis/6-AC (125 watt, 100-240 VAC)
806-39125-DC PS/125-DC Module, for iMediaChassis/6-DC (125 watt, -48 V DC)
Adapter, RJ-45 to DB9 (Female)
The iMediaChassis lines operate with the following
IMC Modules: iMcV-FiberLinX-II: Pg 7 iMcV-Giga-FiberLinX-II: Pg 8 iMcV-WDM: Pg 24
IE-iMcV-2xLIM: Pg 25 iMcV-PIM: Pg 26 iMcV-LIM: Pg 26 iMcV-LIM 10/100: Pg 26 iMcV-Gigabit: Pg 27
IE-iMcV-Gigabit: Pg 27 iMcV-MediaLinX: Pg 28
IE-iMcV-MediaLinX: Pg 28 iMcV-Giga-MediaLinX: Pg 28 iMcV-T1/E1/J1: Pg 29 iMcV-DS3/E3/STS: Pg 30 iMcV-E1 Mux/4: Pg 31 iMcV-E1 Mux/4 + Ethernet: Pg 31
IE-iMcV-T1 Mux/4+Ethernet: Pg 32 iMcV-Switch: Pg 33
IE-iMcV-MultiWay: Pg 34 iMcV-PSE-Midspan: Pg 35
IE-iMcV-VDSL2 LANextender: Pg 36
IE-iMcV-Mode Converters: Pg 39
SNMP Management Module: Pg 43
SNMP Management Module
The SNMP Management Module allows users to utilize the full SNMP functionality of all manageable “iMcV” modules when installed concurrently in an iMediaChassis. Employing managed media converters in your network allows for troubleshooting at remote sites without the initial need for a costly truck roll.
Power Supplies for iMediaChassis/20
806-39400-AC PS/400-AC Module, for p/n 50-10954-AC, iMediaChassis/20-AC (400 watt, 100-240 VAC)
806-39401-AC
806-39960-AC
PS/401-Dual-AC Module, for p/n 850-10956-AC, iMediaChassis/20-2AC
PS/960-AC Power Module, for p/n 850-10960-2AC, iMediaChassis/20-2AC (100-240 VAC)
806-39960-DC PS/960-DC Power Module, for p/n 850-10960-2DC, iMediaChassis/20-2DC (300 watt, -48 VDC)
45
IE-Power/5V
806-39753 IE-Power/5V Module, AC to DC DIN Rail Power Adapter (-20° to +70°C) , for IE-Multiway, MiniMc Family, IE-MiniMc Family and IE-Mode Converter
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Networks
Unmanaged Chassis
MediaConverter
Version
Part Number
AC/DC
Power Supply
Regulatory
Operating Temp
Storage Temp
Humidity
1-Slot
851-10901
4-Slot
851-10904
8-Slot
851-10908
AC AC
115-230V AC, 50/60Hz,
0.3/0.15A
120-240V AC, 50/60Hz, 1.0/0.5A
AC
100-250V AC, 50/60Hz, 1.6A
FCC Class A, UL/CUL, CE, CSA
+32° to +122°F (0° to +50°C)
-13° to +158°F (-25° to +70°C); 5 to 95% (non-condensing)
5% to 95%, non-condensing, 0 – 10,000 ft altitude
Dimensions
Weight
Mounting
1.60”H x 4.75”W x 5.20”D
(4.06 x 12.07 x 13.21 cm)
2 lbs (0.9 kg)
NA
1.75”H x 8.60”W x 4.73”D (8.3 x
21.84 x 12.01 cm)
3.5 lbs (1.6 kg)
Shelf (Sold Seperately)
1.75”H x 17.4”W x 4.70”D (4.45 x 44.20 x 11.94 cm)
6.25 lbs (2.8 kg)
Brackets Included
12-Slot AC
851-10912
AC
115-230V AC, 50/60Hz, 1.2/0.6A
1.75”H x 17.40”W x 8.76”D
(4.45 x44.20 x 22.25 cm)
11.0 lbs (5 kg)
Brackets Included
The MediaConverter lines operate with the following IMC
Modules:
McPIM TP/FO
McLIM TX/FX and TX/SX
McLIM TP-TX/FX and TP TX/SX
McGigabit TX/SX and TX/LX
The MediaChassis and IE-MediaChassis lines operate with all the iMcV-Modules
MediaChassis IE-MediaChassis
(extended operating temperature)
Version
Part Number
AC/DC
/1-AC
850-13100
AC
/2-AC
850-13101
AC
/1-AC
850-33100
AC/DC
/1-DC
850-32105
DC
Power Supply
Regulatory
Operating Temp
Storage Temp
Humidity
Dimensions
100-240V AC, 50/60Hz, 1A
FCC Class A, UL/cUL, CE,
CSA, CB
Internal AC Power Supply
1.55”H x 4.75”W x 7.31”D
(3.94 cm H x 12.07 cm W x
18.57 cm D)
Weight
Accessories
1.6 lbs (0.73 kg)
FCC Class B, UL/cUL,
+32° to +122°F
(0° to +50°C)
CE, CSA
2.2”H x 4.75” W x 7.3”D
(5.6 cm H x 12.1 cm W x 18.5 cm D)
1.9 lbs (0.86 kg)
DC Terminal: 7-50V DC, 3A-0.1A
(Negative ground referenced)
35-75V DC, 500mA, Internal
DC Power Supply
FCC Class B, UL/cUL, CE, CSA
FCC Class B, UL/cUL, CE,
CSA, CB
-40° to +158°F
(-40° to +70°C) with AC wall adapter
+14° to +122°F (-10° to +50°C)
-40° to 185°F (-40° to 85°C)
5% to 95%, non-condensing, 0 – 10,000 ft altitude
0.90”H x 4.30” W x 4.00”D
(2.29 cm H x 10.92 cm W x 10.16 cm D)
0.6 lbs (0.27 kg)
1.55”H x 4.75”W x 7.31”D
(3.94 cm H x 12.07 cm W x
18.57 cm D)
1.6 lbs (0.73 kg)
/2-AC
850-13106
AC
100-240V AC, 50/60Hz, 1A
Internal AC Power Supply
/2-DC
850-32106
DC
35-75V DC, 1.5A
(Negative ground referenced)
Internal DC Power Supply
FCC Class A, UL/cUL, CE, CSA, CB
-31° to +176°F (-35° to +80°C)
2.2”H x 4.75” W x 7.3”D
(5.6 cm H x 12.1 cm W x 18.5 cm D)
2.2”H x 4.75” W x 7.3”D
(5.6 cm H x 12.1 cm W x 18.5 cm D
1.9 lbs (0.86 kg)
Part Number Accessories for MediaChassis
895-39226 McBasic/MediaChassis Rackmount Brackets
895-39227
895-39949
McBasic/MediaChassis Wallmount Brackets
Rackmount shelf for iMediaChassis/3, McBasic, MediaChassis, AccessEtherLinX
806-39040
Accessories for MediaConverter Chassis
PS/40x-AC (40 watt, 100 to 240 VAC input)
Networks
46
Types of Fiber Connectors
The ST Connector
Which uses a bayonet locking system is the most common connector.
The FC Connector
Is a threaded connector used in high-vibration environments.
The SC Connector
Has a molded body and a push-pull system.
The MTO Connector
Is a connector that uses high-fiber-count ribbon cable. Used in high-density fiber applications.
The LC Connector
Is a small-form-factor connector, features a ceramic ferrule and looks like a mini SC connector.
The MTP Connector
Is a connector that uses high-fiber-count ribbon cable. Used in high-density fiber applications.
47
The MT-RJ Connector
Is a small-form RJ-style connector, features a molded body and uses a cleave-and-leave splicing.
The MU Connector
Resembles the larger SC connector, but it’s much smaller. It uses the simple push-pull latching connection. Used in high-density fiber applications.
Fiber Optic Cable Construction
Jacket: Usually constructed of extruded PVC. Protects fiber, allows easy handling.
Strengthening fibers:
Aramid yarn (Kevlar)
Coating:
900 μM plastic, coats and protects the fiber.
Fiber
Multimode vs. Singlemode
Total Internal Reflection
Multimode
125 For use in general data and voice fiber applications
Used in LANs and over short distances
Fiber Performance Standards
Fiber Type Wavelength Attenuation
(dB/km) Max.
Bandwidth
(MHz/km)
Multimode
50-/125-Micron 850 nm
1300 nm
3.5
1.5
500
500
62.5-/125-Micron 850 nm
1300 nm
3.5
1.5
160
500
Singlemode
Premises
Outside Plant
1310 nm
1550 nm
1310 nm
1550 nm
1.0
1.0
0.5
0.5
—
—
—
—
62.5
125
50
125
9
Multimode
Singlemode
Core Cladding Buffer Coating
(diameters vary)
For use in new construction and installations
Provides more bandwidth than 62.5/125 at 850 nm wavelengths
50 times more distance than multimode
Used in long-haul network connections
Visit www.imcnetworks.com
Call 1-800-624-1070 for more information.
Networks
Types of Modular Jacks
6-Position 4 Contact (RJ-11)
T568A, T568B and USOC Wiring
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
1 2 3 4 5 6
6-Position 6 Contact (MMJ)
1 2 3 4 5 6
8-Position 8 Contact (RJ-45)
1 2 3 4 5 6 7 8
8-Position 8 Contact Keyed (RJ-45)
T568A
Pair 1
Pair 2
T568B
Pair 3
Pair 4
USOC
Straight-Pinned and Crossover Cable
Straight-pinned cable has the most common type of pinning. The send and receive pairs are wired straight through on either end of the cable.
Crossover cable is generally used for peer-to-peer connections. The send and receive pairs are crossed between Connector A to Connector
B on either end of the cable.
T568A and T568B Crossover
Cable
Connector
(A)
Connector
(B)
3
4
1
2
—
—
—
—
3
6
1
2
7
8
5
6
—
—
—
—
8
7
4
5
USOC Crossover
Cable
Connector
(A)
Connector
(B)
3
4
1
2
—
—
—
—
8
7
6
5
7
8
5
6
—
—
—
—
2
1
4
3
1 2 3 4 5 6 7 8
Frequency
Attenuation (Min. at 100 MHz)
Characteristic Impedance
NEXT (Min. at 100 MHz)
PS-NEXT (Min. at 100 MHz
EL-FEXT (Min. at 100 MHz
PS-ELFEXT (Min. at 100 MHz)
PS-ANEXT (Min. at 500 MHz
PS-AELFEXT (Min. at 500 MHa)
Return Loss (Min. at 100 MHz)
Delay Skew (Max. per 100 m)
Networks Supported
Balanced Twisted-Pair Cable Specifications
CAT5
100 MHz
22.0 dB
100 ohms ± 15%
32.3 dB
—
—
—
—
16.0 dB
16.0 dB
—
100BASE-TX
CAT5e
100 MHz
22.0 dB
100 ohms ± 15%
35.3 dB
32.3 dB
23.8 dB
20.8 dB
—
20.1 dB
20.1 dB
45 ns
1000BASE-T
CAT6
250 MHz
19.8 dB
100 ohms ± 15%
44.3 dB
42.3 dB
27.8 dB
24.8 dB
—
20.1 dB
20.1 dB
45 ns
1000BASE-T
CAT6a
500 MHz
—
—
27.9 dB
—
9.3 dB
—
49.5 dB
23.0 dB
8.0 dB
—
10GBASE-T
CAT7
600 MHz
20.8 dB
100 ohms ± 15%
60.7 dB
57.7 dB
38.4 dB
35.4 dB
—
14.1 dB
17.3 dB
20 ns
10GBASE-T
NOTE: The ISO currently has Class F (Category 7a) requirements under development. They are based on Class F requirements and the Catagory 7 non-RJ style plug. They specify a bandwidth of 600 to 1000 MHz.
Networks
48
Networks www.imcnetworks.com
IMC Networks
Headquarters/Western US
19772 Pauling
Foothill Ranch, CA 92610
TEL: 949-465-3000
FAX: 949-465-3020 [email protected]
IMC Networks
Eastern US/Latin America
Corporate Square
28050 US 19 North, Suite 306
Clearwater, FL 33761
TEL: 727-797-0300
FAX: 727-797-0331 [email protected]
IMC Networks
Europe
Herseltsesteenweg 268
B-3200 Aarschot, Belgium
TEL: +32-16-550880
FAX: +32-16-550888 [email protected]
Document # 99-90293-12 Rev A1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Product Overview
- 5 Quick Product Search Matrix
- 6 Product Features
- 7 IE-MultiWay
- 8 AccessEtherLinX
- 9 Giga-AccessEtherLinX-II
- 10 iMcV-FiberLinX-II
- 11 iMcV-Giga-FiberLinX-II
- 12 IE-MiniFiberLinX-II
- 13 IE-MiniFiberLinX-II/Telco
- 14 IE-MiniFiberLinX-II/LastGasp
- 21 McBasic Series
- 22 PSE-McBasic
- 23 AccessConverter
- 24 Mc Modules for MediaConverter Series
- 25 McPC Series
- 26 McPC-MediaLinX Series
- 27 McPC-Gigabit Series
- 28 WDM Series
- 31 iMcV-PIM, iMcV-LIM Modules
- 32 iMcV-Gigabit Modules
- 41 IE-iMcV-VDSL2-LANextender
- 42 iMcV-Fiber Mode Converters (iMcV-S2MM, M2MM, S2SM)
- 43 IE-ModeConverter SFP/SFP
- 44 IE-iMcV-ModeConverter SFP/SFP
- 45 IE-SFP 100 to 155 Mbps (OC-3) Modules
- 46 IE-SFP 1250 Mbps/1.25 Gbps (OC-24) Modules
- 47 IE-SFP 2.4 Gbps (OC-48) and 10 Gbps (OC-192) Modules
- 48 Managed Chassis and Accessories
- 49 Unmanaged Chassis and Accessories