ABUS Xevox Duplex MW VdS Datasheet


Add to my manuals
2 Pages

advertisement

ABUS Xevox Duplex MW VdS Datasheet | Manualzz

ABUS Security-Center

BW8030

Xevox Duplex MW VdS motion detector

The Xevox Duplex MW VdS motion detector is a motion sensor with one PIR and one microwave sensor. An alarm is not triggered until both sensors register movement.

The combination of passive infrared (PIR) and microwave (MW) ensures very high protection against false alarms. The reason: An alarm is not triggered until both sensors – which use technically different detection methods – register movement. Whereas the PIR sensor reacts to moving heat, the microwave sensor actively monitors the surroundings for movement (similar to radar). The transmission frequency is 9.35 GHz.

The best place to install the sensor is in a corner, between 2 and 3 metres above the floor. The intruder’s possible direction of movement should be at right-angles to the sensor.

Product highlights:

The viewing angle of the Xevox Duplex MW VdS motion detector sensor is 90 degrees, and the detection range – depending on installation height – up to 15 x 15 metres. You can vary its sensitivity by means of a jumper. In this way, you can define the number of pulses that have to be detected before the sensor opens the alarm relay.

The Xevox Duplex MW VdS motion detector sensor has an alarm

• PIR and microwave element

• VdS-certified

• Alarm memory and first-sensor recognition

• Detection range: 15 x 15m

• Aperture angle: 90°, ideal for corner mounting memory. If the alarm centre is disarmed following an alarm, the LED on the sensor that triggered the alarm lights up. Depending on the configuration, you can also see which sensor first triggered the alarm. Due to its reliability and high quality, the Xevox Duplex MW VdS motion detector sensor is VdS-certified.

© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.

ABUS Security-Center

BW8030

Xevox Duplex MW VdS motion detector

Technical Data

Installation

Detection method

Detection range (m)

Alarm memory

Immune to animals

Power consumption

Voltage supply

Alarm contact

Tamper contact

Temperature range

VdS

VSÖ

Wall

PIR / MW

15 x 15

Yes

No

13 mA

9 -16 V

NC, 100 mA, 24 V DC

NC, 100 mA, 24 V DC

-10° to 55 °C

G106509

GS-N060614/05E

© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement