WIRELESS USB ADAPTER COMPATIBILITY SHEET
AW-NU231 Shown
Ready for Wireless Internet
Wireless USB Adapters allow you to connect our Wireless Internet Ready TVs to the internet by using your wireless home network. The
AzureWave AW-NU231 is designed to work with our Wireless Internet Ready TVs so you can enjoy our StreamTV™ Internet Media feature
without wires running from your TV to your home router. The following Mitsubishi TVs are considered Wireless Internet Ready:
LT-55154
WD-60738
WD-65738
WD-73738
WD-82738
WD-65838
WD-73838
WD-82838
AzureWave AW-NU231
Specs
MSRP: $79
•Easy Set Up
•Self-detection
•Compatible with secure networks
•HD Streaming
•1 Yr. Warranty
•802.11 b/g/n
•Measures 2.9˝ L x .94˝ W x .31˝ H
•Transmits up to 300 Mbps
• Dual band 2.4 GHz & 5GHz
•802.11 b/g/n compatible
AzureWave is a trademark of AzureWave Technologies, Inc.
©2010 Mitsubishi Digital Electronics America, Inc. | www.mitsubishi-tv.com
WIRELESS USB ADAPTER COMPATIBILITY SHEET
To connect your Mitsubishi Wireless internet ready TV to your wireless home network when using an AzureWave AW-NU231,
follow the steps below:
1) Connect an Azurewave AW-NU231 USB wireless adapter to the TV’s USB port
USB
Wireless Adapter
2) Open the Setup > Network menu. After a few seconds, detected networks will appear listed on the screen in order of signal strength.
3) Highlight the desired network and press ENTER to connect. A check will appear next to the connected network.
4) If connecting to a secure network, enter the network key or password on the remote control when prompted.
Note: Password is case sensitive. Press the “Last” key on your remote to switch between upper and lower case letters.
AzureWave is a trademark of AzureWave Technologies, Inc.
©2010 Mitsubishi Digital Electronics America, Inc. | www.mitsubishi-tv.com