Spectra® IV SL Series Dome Systems

PRODUCT SPECIFICATION
camera solutions
Spectra® IV SL Series Dome Systems
HIGH-PERFORMANCE INTEGRATED DOME SYSTEM
Product Features
• Autofocus, High Resolution Integrated LowLight ™ Color
Camera/Optics Package
• Day/Night, 540 TVL
• 23X Optical Zoom
• Window Blanking
• Camera Title Overlay, 20 User-Definable Characters
• On-Screen Compass and Tilt Display
IN-CEILING MODEL
SD423-F0
• Password Protection
• Freeze Frame During Presets
ENVIRONMENTAL PENDANT
SD423-PG-E0
(SHOWN WITH SWM-GY WALL MOUNT)
• Built-in Surge and Limited Lightning Protection
• Integrated Passive Unshielded Twisted Pair (UTP) Circuit
• Internal Scheduling Clock
• Ability to Add IP Network Capability by Purchasing Optional TXB-IP
Module
Modularity
Lower Dome
Spectra® IV SL Series was designed with ease of installation and ease of
maintenance in mind. Each dome system consists of three components: a
back box, a dome drive, and a lower dome. These three system components
are interchangeable with other Spectra IV dome systems, making retrofitting
and application adjustments simple. Also, dome drives and lower domes can
be removed and replaced reducing maintenance time.
Special consideration was taken when designing the Spectra IV SL lower
dome bubble to ensure that an optimal optical relationship between the lens
and bubble was achieved, providing crystal clear video at long focal lengths.
Back Box
Spectra IV SL back box options include the following models: environmental
in-ceiling (ideal for outdoor soffits), indoor in-ceiling, indoor surface mount,
standard and environmental. A passive UTP circuit is located on the door
assembly for convenient video transmission through twisted pair wire. For
added flexibility, Pelco fiber modules can also be attached to the door
assembly for transmission over single-mode or multimode fiber.
Dome Drive
The Spectra IV SL dome drive’s integrated optics package incorporates
many advanced features that allow the system to produce high quality video
in the most difficult environments. The camera features 23X optical zoom and
12X digital zoom. Spectra IV SL dome drives feature an EXview HAD™ imager
for increased sensitivity and LowLight™ technology to compensate for
scenes where minimal light is present. The camera also offers freeze frame
between presets and window blanking.
Dome Systems
Spectra IV SL dome systems feature many software enhancements that
increase performance and make configuration and operation easy. An internal
scheduling clock allows for the scheduling of presets and patterns.
Window blanking enables a user to configure a four-sided, user-defined
privacy area. Password protection prevents unauthorized users from
changing the system settings. Configurable on-screen compass and tilt
display provides positioning information when needed. Intuitive multilingual
on-screen menus can be displayed in English, Spanish, Portuguese, Italian,
French, German, Russian, Polish, Turkish, and Czech.
Spectra IV SL’s variable speed capabilities range from a smooth, fast pan
motion of 400 degrees per second to a smooth “creep” speed of 0.1 degree
per second. The system is capable of continuous 360 degrees rotation and has
an “auto flip” feature that allows the dome to rotate 180 degrees and
reposition itself for uninterrupted viewing of any subject that passes directly
beneath the dome.
In addition, with the optional Pelco TXB-IP module, you can add IP network
capability at any time to a Spectra IV dome system without losing analog
viewing and control. By snapping the TXP-IP module into the back box, you can
stream network video to a Web browser, Endura® , Digital Sentry® , or
third-party software recording solution allowing integration into virtually any
IP-based system.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2449 / REVISED 6-10-11
TECHNICAL SPECIFICATIONS
CAMERA/OPTICS
Signal Format
Scanning System
Image Sensor
Effective Pixels
NTSC
PAL
Horizontal Resolution
NTSC/PAL
Lens
Zoom
Zoom Speed (optical range)
Horizontal Angle of View
DOME DRIVE FEATURES
NTSC (DD423)
PAL (DD423-X)
2:1 Interlace
1/4-inch progressive scan CCD
768 (H) X 494 (V)
752 (H) X 582 (V)
540 TV Lines
f/1.6 (focal length, 3.6 ~ 82.8 mm)
23X optical, 12X digital
2.9/4.2/5.8 seconds
54° at 3.6 mm wide zoom;
2.5° at 82.8 mm telephoto zoom
Automatic with manual override
Focus
Maximum Sensitivity at 35 IRE
NTSC/EIA
0.65 lux at 1/60 sec (color)
0.15 lux at 1/60 sec (B-W)
PAL/CCIR
0.55 lux at 1/50 sec (color)
0.12 lux at 1/50 sec (B-W)
Sync System
Internal/AC line lock, phase adjustable using
remote control, V-Sync
White Balance
Automatic with manual override
Shutter Speed
Automatic (electronic iris)/manual
NTSC
1/2 ~1/30,000
PAL
1/1.5 ~1/30,000
Iris Control
Automatic iris control with manual override
Gain Control
Automatic/OFF
Video Output1
Vp-p, 75 ohms
Video Signal-to-Noise
>50 dB
• 64 Presets
• ±0.1° Preset Accuracy
• Multilingual Menus (English, Spanish, Portuguese, Italian, French,
German, Russian, Polish, Turkish, and Czech)
• RJ-45 Data Port for Software Update and Setup
• On-Screen Compass, Tilt, and Zoom Display
• Password Protection
• 400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed
• Rotating Discreet Liner with Sealed Fixed Bubble
• 8 Zones (configurable in size) Can Be Labeled with up to 20 Characters
Each or Set to Output Blank Video
• Configurable Locations of Labels and On-Screen Displays
• Patterns: 1 On-Screen, User-Defined Configurable Pattern; Includes Pan,
Tilt, Zoom, and Preset Functions
• Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion
to Depth of Zoom
• Variable Scan Speed: Scan Speed Can Be Configurable Between
1 to 40°/sec
• Pan Motion Allows 0.1 to 150°/sec Pan Speed
• Configurable Limit Stops for Auto/Random/Frame Scan Modes
• Auto-sensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D,
Sensormatic®, Vicon®); Accepts Other Control Protocols with Optional
Translator Card
• Digital Position and Zoom Control and Feedback Using D Protocol
• Built-in Menu System for Setup of Configurable Functions
• “Auto Flip” Rotates Dome 180° at Bottom of Tilt Travel
• Window Blanking: Up to 4 Four-Sided, User-Defined Shapes
• 1 Alarm Input
• 1 Auxiliary (Form C) Relay Output
• Freeze Frame Between Presets
TECHNICAL SPECIFICATIONS
BACK BOX FEATURES
7.6 (19.3)
1.6
(4.0)
Surface Mount (Indoor)
• Available in Black or White Finish
• Installs Quickly and Easily to Any Type of Ceiling
8.7
(22.0)
• Quick Disconnect to Dome Drive
• Injection-Molded Plastic
5.9 (15.0)
7.5 (19.0)
In-Ceiling (Indoor)
• Single Back Box for Suspended or Hard Ceiling Applications
5.2
(13.2)
• Requires 5.25-Inch Space Above Ceiling and 3.25 Inches Below
• Minimum Ceiling Thickness 0.5-Inch; Maximum 1.75 Inches
• Quick Disconnect to Dome Drive
3.5
(8.8)
• Aluminum Construction
5.9 (15.0)
• Suitable for Use in Environmental Air Handling Spaces
8.2 (20.8)
9.9 (25.2)
Environmental In-Ceiling
• Single Back Box for Hard Ceiling Applications
4.4
(11.0)
• Requires 4.4-Inch Space Above Ceiling and 4.3 Inches Below
• Includes Heater and Fan
• Minimum Ceiling Thickness 0.5-Inch; Maximum 1.75 Inches
4.3
(10.9)
• Quick Disconnect to Dome Drive
• Aluminum Construction
5.9 (15.0)
8.6 (21.8)
Standard and Environmental Pendant
• Standard and Environmental Models
• Standard Pendant Available in Black or Gray Finish; Environmental
Pendant Gray Finish Only
10.6
(26.9)
• Quick Disconnect to Dome Drive
• Aluminum Construction
• Environmental Model Includes Sun Shield, Fan, and Heater
(ENVIRONMENTAL DOME
WITH SUN SHROUD SHOWN)
5.9 (15.0)
8.6 (21.8)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
TECHNICAL SPECIFICATIONS
MECHANICAL (Dome Drive Only)
GENERAL
Pan Movement
Vertical Tilt
Manual Pan/Tilt Speeds
Pan
Construction
Back Box
Surface Mount
In-Ceiling
Pendant
Dome Drive
Bubble
Light Attenuation
Smoked
Clear
Chrome
Gold
Cable Entry (Back Box)
In-Ceiling and
Surface Mount
Pendant
Weight (approximate)
Back Box
Surface Mount
In-Ceiling
Environmental
In-Ceiling
Standard Pendant
Environmental Pendant
Dome Drive
Lower Dome
Surface Mount
In-Ceiling
Pendant and
Environmental
In-Ceiling
Environment
Surface Mount
In-Ceiling
Environmental In-Ceiling
Pendant, Standard
and Environmental
Operating Temperature
Surface Mount and
Indoor In-Ceiling
Standard Pendant
Maximum
Tilt
Preset Speeds
Pan
Tilt
360° continuous pan rotation
Unobstructed +2° to –92°
0.1° to 80°/sec manual operation,
150°/sec Turbo
0.1° to 40°/sec manual operation
400°/sec
200°/sec
For variable-speed operation an appropriate
controller is required. (With nonvariable
speed control, Spectra IV pan/tilt speed is
20°/sec)
ELECTRICAL
Input Voltage
Input Power
24 VAC
24 VDC
Fuse
18 to 32 VAC; 24 VAC nominal
22 to 27 VDC; 24 VDC nominal
23 VA nominal (without heater);
73 VA nominal (with heater)
0.7 A nominal (without heater);
3 A nominal (with heater)
1.25 A
CERTIFICATIONS/RATINGS/PATENTS
•
•
•
•
•
•
CE, Class B
FCC, Class B
UL/cUL Listed
C-Tick
S Mark for Argentina
Meets NEMA Type 4X, IP66 when installed properly (BB4-F-E, BB4-PB,
BB4-PG, and BB4-PG-E)
• Meets NEMA Type 1, IP40 (BB4-SMW, BB4-SMB, and BB4-F)
• U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2;
7,161,615 B2
Minimum
Environmental
In-Ceiling and
Environmental Pendant
Maximum
Minimum
TS2
Plastic
Aluminum
Aluminum
Aluminum, thermo plastic
Acrylic
f/0.5 light loss
Zero light loss
f/2.0 light loss
f/2.0 light loss
0.75-inch conduit fitting
Through 1.5-inch NPT pendant mount
Unit
Shipping
0.7 lb (0.32 kg)
1.5 lb (0.68 kg)
2 lb (0.90 kg)
2 lb (0.90 kg)
2.1 lb
2.4 lb
3.5 lb
3.3 lb
3 lb
4 lb
5 lb
5 lb
(0.95 kg)
(1.09 kg)
(1.59 kg)
(1.48 kg)
(1.36 kg)
(1.81 kg)
(2.27 kg)
(2.27 kg)
0.4 lb (0.18 kg)
0.2 lb (0.09 kg)
1 lb (0.45 kg)
1 lb (0.45 kg)
0.6 lb (0.27 kg)
2 lb (0.90 kg)
Indoor
Indoor
Outdoor
Indoor/outdoor
32° to 122°F (0° to 50°C)
(Assumes no wind chill factor)
113°F (45°C) absolute maximum;
95°F (35°C) sustained maximum
25°F (–4°C) sustained minimum
(Assumes no wind chill factor)
140°F (60°C) absolute maximum;
122°F (50°C) sustained maximum
–60°F (–51°C) absolute minimum; prevents
icing at sustained minimum of –50°F (–45°C);
de-ices 0.1 inch (2.5 mm) within 3 hours after
power-up
–29.2° to 165°F (–34° to 74°C)
Per NEMA TS2, para. 2.1.5.1, using fig. 2.1 test profile
Effective Projected
Area (EPA)
20.5 square inches (without mount)
47 square inches (with IWM Series mount)
RELATED PRODUCTS
OPTIONAL ACCESSORIES
RECOMMENDED MOUNTS
DD5-FM
Surface Mount Domes
PASMB
Fixed camera mount adapter. Interchangeable
with all Spectra IV dome drives.
IPS-CABLE
Remote monitor cable and software kit
consisting of the Spectra IV remote monitor
interface cable and necessary software for
use with a PC. Refer to www.pelco.com for a
list of compatible devices.
IPS-RDPE-2*
Remote data port. 24 VAC, wall/pole mount
video/data breakout box. Allows ground-level
control/configuration and software upgrades
when used with the IPS-CABLE.
TXB Series*
Translator boards for AD™ Manchester,
Hernis, Bosch® (Philips, Burle), TASS, and
NTCIP protocols.
TXB-IP Series*
Communication module that allows you to
control and monitor Spectra IV dome systems
over an IP network (in-ceiling and pendant
models only).
FS85011A*
Fiber transmitter sends one unidirectional
composite video channel and one
bidirectional data channel over one
multimode or single-mode fiber optical cable.
*If TXB or FS85011A boards are installed, it is not possible to upgrade system
operating software through the remote data port (IPS-RDPE-2).
SD53SM-P
In-Ceiling Domes
SD5-P
SCA1
Pendant Domes
BB5-PCA-BK†
BB5-PCA-GY†
IWM Series
MRCA
PP4348
PP350/PP351
SWM Series
†
Pendant adapter for surface mount dome,
black
2' x 2' drop ceiling panel for BB4-SMW Series
back boxes. Replaces 2' x 2' ceiling tile.
Aluminum construction.
2' x 2' drop ceiling panel, aluminum
construction. Replaces 2' x 2' ceiling tile.
Support rails for BB4-F; for use in ceiling tile
applications.
Pendant conduit adapter, black
Pendant conduit adapter, gray
Wall mount, with or without integral 24 VAC,
100 VA transformer. Black or gray finish.
Can be adapted for corner, parapet or pole
applications.
Ceiling mount, black
Parapet roof mount
Parapet wall/roof mount
Compact wall mount, black or gray finish.
Can be adapted for corner or pole
applications.
Not suitable for use with heavy-duty, pressurized, or stainless steel Spectra
domes.
RECOMMENDED POWER SUPPLIES
MCS Series
WCS Series
Indoor, 24 VAC power supply
Outdoor, 24 VAC power supply
Refer to individual power supply specifications for more information.
SYSTEM AND COMPONENT MODELS
SYSTEM MODEL NUMBERS
Type
Back Box Color
Surface Mount
Lower Dome
White
Black
In-Ceiling, Indoor
Black
In-Ceiling, Environmental*
Pendant, Standard
Black
Black
Light Gray
Pendant, Environmental*
Light Gray
23X Day/Night (NTSC)
23X Day/Night (PAL)
Smoked
SD423-SMW-0
SD423-SMW-0-X
Clear
SD423-SMW-1
SD423-SMW-1-X
Chrome
SD423-SMW-2
SD423-SMW-2-X
Gold
SD423-SMW-3
SD423-SMW-3-X
Smoked
SD423-SMB-0
SD423-SMB-0-X
Clear
SD423-SMB-1
SD423-SMB-1-X
Chrome
SD423-SMB-2
SD423-SMB-2-X
Gold
SD423-SMB-3
SD423-SMB-3-X
Smoked
SD423-F0
SD423-F0-X
Clear
SD423-F1
SD423-F1-X
Chrome
SD423-F2
SD423-F2-X
Gold
SD423-F3
SD423-F3-X
Smoked
SD423-F-E0
SD423-F-E0-X
Clear
SD423-F-E1
SD423-F-E1-X
Smoked
SD423-PB-0
SD423-PB-0-X
Clear
SD423-PB-1
SD423-PB-1-X
Chrome
SD423-PB-2
SD423-PB-2-X
Gold
SD423-PB-3
SD423-PB-3-X
Smoked
SD423-PG-0
SD423-PG-0-X
Clear
SD423-PG-1
SD423-PG-1-X
Chrome
SD423-PG-2
SD423-PG-2-X
Gold
SD423-PG-3
SD423-PG-3-X
Smoked
SD423-PG-E0
SD423-PG-E0-X
Clear
SD423-PG-E1
SD423-PG-E1-X
COMPONENT MODEL NUMBERS
Back Box
BB4-SMB
BB4-SMW
BB4-F
BB4-F-E
BB4-PB
BB4-PG
BB4-PG-E
Surface mount, black
Surface mount, white
In-ceiling, black
In-ceiling, black, environmental
Pendant mount, black, standard
Pendant mount, gray, standard
Pendant mount, gray,
environmental
Lower Dome†
Dome Drive
DD423
DD423-X
DD5-FM
Day/Night (NTSC) camera (23X)
Day/Night (PAL) camera (23X)
Removable, fixed mount bracket only (camera and
lens not included); interchangeable with all
Spectra IV dome drives
LD53SMB-0
LD53SMB-1
LD53SMB-2
LD53SMB-3
LD53SMW-0
LD53SMW-1
LD53SMW-2
LD53SMW-3
LDHQF-0
Notes:
LDHQF-1
To order a fixed mount dome system refer to the component models above and select one each of the following options: LD5F-2
back box (BB4-F), dome drive (DD5-FM), plus choice of lower dome (LDHQF-0, LDHQF-1, LD5F-2, or LD5F-3).
LD5F-3
LDHQPB-0
For environmental applications, you must order an environmental back box (BB4-F-E or BB4-PG-E).
LDHQPB-1
DD5-FM is ideal for use with Pelco’s C10DN-6, C10DN-6X, C10CH-6, C10CH-6X, CCC1390H-6, and CCC1390H-6X cameras LD53PB-2§
with selected Pelco lenses.
LD53PB-3§
Smoked, surface, black
Clear, surface, black
Chrome, surface, black
Gold, surface, black
Smoked, surface, white
Clear, surface, white
Chrome, surface, white
Gold, surface, white
Smoked, in-ceiling
Clear, in-ceiling
Chrome, in-ceiling
Gold, in-ceiling
Smoked, pendant, black
Clear, pendant, black
Chrome, pendant, black
Gold, pendant, black
*Environmental dome systems include a heater, fan, and the environmental pendant also includes a sun shield.
†Use the pendant lower domes with the environmental in-ceiling and environmental pendant back boxes.
§Not recommended for outdoor use due to possible light reflections.
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2011, Pelco, Inc. All rights reserved.