Empisal ESM2900 Instruction book

13

14

01. STRAIGHT STITCH

02. LEFT POSITION, STRAIGHT STITCH

03. QUILT STITCH, LIKE HAND SEWN

04. TRIPLE STRAIGHT STITCH

05. STEM STITCH FOR STRETCH FABRICS

06. ZIGZAG STITCHING

07~11. BUTTONHOLES

12. 3-STEP ZIGZAG

13. SATIN STITCH

14. RICK-RACK

15. OVERLOCK

16. DOUBLE OVERLOCK

17. SHELL

18. BLIND HEM

19. BLIND HEM, ZIGZAG

20. DOUBLE ACTION

21. BRIDGING

22. FEATHER

23. FEATHER

24. ELASTIC OVERLOCK

25~66. DECORATIVE AND FUCTIONAL

STITCHES

1. R aise presser foot lever.

2. Press the needle up / down button or rotate the handwheel toward you to raise the needle in the position.

3. Place a spool of thread onto the spool pin and secure with the proper size spool cap (see page 11).

4. Pass the thread into the thread guide for upper threading and snap forward between the thread guide and guide plate.

5. Bring thread forward down the right channel, then to the left and up the left channel.

6. Pull the thread through and into the take-up lever from left to right.

7. Pass the thread down the left channel and into the thread guide at the base of the face cover.

8. Pass the thread from right to left into the thread guide on the needle clamp.

9. Thread the needle from front to back or follow directions for needle threader on next page.

This stitch will sew without stitches showing on right side of fabric.

Note:

If too much of the stitching shows on the right side of the fabric, change to a narrower stitch width or move the guide on the foot to the right.

If the zigzag does not meet the fold, widen the stitch

width or move the guide on the foot to the left.

Interesting decorative stitches can be produced by twin needle sewing application with two different colors of thread. Always making test sewing to help you determine the most appropriate setting for best sewing result.

1. Set stitch width no more than 3.5mm.

2 .Insert twin needle.

3. Push the auxiliary spool pin with felt washer into the hole on the folded handle, and put the second thread spool on this pin.

( See drawing 2).

4 .Thread the two different threads , following the threading route as instructed on page 11.

1

5.For better sewing result, do not put

both threads through the needle bar

thread guide., thread right to the needle

eye from front to back wards.

2

6.The following patterns are not

recommended for twin needle sewing

application as needles might interfere

with needle plate which will result in

needle breaks.

Pattern No.7-11

No.25-29

No.39-66

3

-29-