Schneider Cat5e RJ45 Connector Datasheet

Complementary

Frequency range

Protection type

Voltage proof

Current rating

Insulation resistance

Electrical resistance

Transfer impedance

Coupling attenuation

Transverse conversion loss

Contact pins

Durability

IDC wire diameter

Insulation diameter (wire)

Pulling force

Applicable standards

Environment

Operational temperature range

Environmental characteristic

Climatic category

Aug 20, 2012

Product data sheet

Characteristics

VDIB17725B12

Actassi S-One C5e Connector RJ45 Shielded

Cat 5e box x 12

Main

Range name

Product type

Type of footprint

Device presentation

Performance category

Compatible LAN cable types

Supported applications

Protocols

Material and colour

(category colour coded)

Colour coding

Quantity per set

Length

Width

Height

Actassi

RJ45 network socket

S-One

Integrated one piece design

5e

F/UTP

S/FTP

SF/UTP

U/FTP

F/FTP

1000BASE-T

PoE+ (Power over Ethernet)

VoIP (Voice IP)

Wire organizer: green (ABS + PC)

Connector: silver (zamak)

568 A/B

Set of 12

35 mm

18 mm

28 mm

<= 100 kHz

Integrated short circuit barrier

Metallic: 360° self adjusting + drain wire contact

1500 V AC/DC, peak, between contacts and shield

1000 V AC/DC, peak, between contacts

<= 1.5 A @25 °C

Initial insulation resistance: <= 500 MOhm @100 V DC

<= 200 Ohm

<= 0.1 Ohm at 1 MHz

<= 0.2 Ohm at 10 MHz

<= 1.6 Ohm at 80 MHz

>= 85 - 20 x log(f) dB from 100...1000 MHz

>= 45 dB from 30...100 MHz

>= 68 - 20 x log(f) dB from 1 kHz...100 MHz

>= 50 dB

8 pins in copper alloy and gold plated (IEC 60603-7)

>= 750 cycles

AWG22...AWG25

0.9...1.4 mm

50 N during 60 s

IEC 60603-7-3

ISO/IEC 11801 Ed2.1

ANSI/TIA-568-C.2

ISO/IEC 11801:2011 Ed.2.2

-40...70 °C

PEP (Energy depletion)

REACH

40/070/21 (21 days)

1

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.