For every detail.
For every occasion.
The all-rounders
with many talents.
New Compact Generation
Easy
Universal
Expert
Make it your home. Make it your home with the oscillating Multifunction Tools
PMF 250 CES, PMF 190 E and PMF 10,8 LI. Unbelievably versatile: sawing, cutting,
sanding and scraping is no problem with these multifunction tools!
www.bosch-pmf.com
Sawing
AIZ 32 EC
AIZ 10 EC
AIZ 32 AB
AIZ 20 AB
AIZ 10 AB
HCS plunge-cutting saw
blade for
wood, 32 x 40 mm
HCS plunge-cutting saw
blade for
wood, 10 x 30 mm
Plastik
Plastik
Part no.
2 609 256 947
Part no.
2 609 256 949
BIM plunge-cutting saw
blade for
metal, 32 x 30 mm
Part no.
2 609 256 971
BIM plunge-cutting saw
blade for
metal, 20 x 20 mm
Part no.
2 609 256 950
BIM plunge-cutting saw
blade for
metal, 10 x 20 mm
Part no.
2 609 256 951
Basic depth stop
(for segment saw blades)
Part no.
2 609 256 C61
Visit www.bosch-do-it.com to find inspirational ideas about home
­improvement and design. There you will not only find hints and tips
on work commonly done around the house, but also construction
guides for extraordinary design projects and, of course, up-to-date
and comprehensive information about all Bosch DIY tools.
www.bosch-do-it.com
www.bosch-do-it.com
Robert Bosch
PO Box 98
Uxbridge
Middlesex
UB9 5HJ
www.bosch-pmf.com
1619G37917 – GB – Printed in Federal Republic of Germany –
Subject to technical alterations. No liability is accepted for printing errors.
Want to find even more ideas?
Now you can also discover the Bosch PMF
range online at www.bosch-pmf.com
The perfectionists
among tools.
Wherever you want to do a project, the Multifunction Tools PMF 250 CES, PMF 190 E and PMF 10,8 LI will help you even
in hard-to-reach areas. Where other tools stop working, the many strengths of these versatile all-rounders really come into
play. Quickly complete all your projects and save yourself a lot of time. Time you can better put to use enjoying the results
of your work.
The multifunction tools
are always finding
new ways to be useful.
The PMF 250 CES, the PMF 190 E and the Cordless Multifunction Tool PMF 10,8 LI are true masters
of versatility. Whether you want to replace an old carpet with a nice new parquet, renew the joints
in your bathroom or finally free the balcony railings of rust – the countless available accessories make
these all-rounders so versatile that every job is quickly and easily completed.
Precise, fast and powerful:
The accessory oscillates back and forth at up to
21,000 times per minute at 2.8 angular degrees.
Versatile tools
for the entire home.
The comprehensive accessory range is matched by the versatile application range of the
multifunction tools. They are therefore the perfect tools for all detailed work around
the entire home. And they are also versatile and comfortable to use outside in the garden.
1 Outside in the garden
Sawing
Scraping
AIZ 32 BB
ATZ 52 SFC
Sanding wood
Sanding metal
Plunge cuts in laminated panels
and hardwood, e.g. for sockets,
­lighting, etc.
Sanding beams and boards,
and fine sanding wood with
­surface blemishes
Removing old varnishes and paint
­residues – even adhesive residues,
­silicone and soft materials
Chamfering and rounding edges
or shaping
Grit 120, 240
3 Interior fitting work
Sawing
Routing
AIZ 28 BB
ACZ 85 RT
Cutting
Sanding
Cutouts in plasterboard, e.g. for water
and electrical installations
Cutting soft expansion joints,
­sealants, window putty and
insulation material
AIZ 28 SC
Cutting joints, routing grooves
in porous concrete
Sanding off paints and primers
2 Renovating living areas
Sawing
Shortening
Cutting to length
ACZ 85 EB
ACZ 100 BB
AIZ 10 AB
Adjusting
Scraping
Cutting
ACZ 85 EC
ATZ 52 SFC
ACZ 100 SWB
Sawing
Cutting
Cutting to length
AIZ 20 EC
AIZ 32 AB
ACZ 85 EB
Rasping
Routing
Scraping
AVZ 70 RT
ACZ 85 RD
ATZ 52 SC
Cutting out parquet and
laminate
Flush adjustment work in
wood, e.g. furniture components and wooden ­
components
Flush cutting to length, e.g.
door frames made of soft,
hard and veneered
wood
Flexible scraper, e.g. removing
carpet adhesive residues,
paint residues or silicone
joints
Saws metal, e.g. when cutting
aluminium floor cover strips or
mouldings to length
Soft materials, e.g. insulation
material for floor soundproofing,
carpet
4 In kitchens and bathrooms
Plunge cuts in softwood,
e.g. recesses in furniture
components and wooden
components
Thoroughly removing adhesive residues, e.g. tile adhesive, or routing
out joints
Plunge-cutting saw blade
for metals, e.g. flush cutting
of non-hardened nails and
copper pipes
Routing out joints or making
cutouts in soft tiles
Cutting plastic, wood and
metal to length, e.g. plastic
pipes and
wood strips
Rigid scraper, e.g. for
removing mortar, tile adhesive,
carpet adhesive and
concrete residues
3
4
2
1
HCS segment saw
blade for wood,
85 mm diameter
BIM segment saw
blade for wood + metal,
85 mm diameter
BIM segment saw
blade for wood + metal,
100 mm diameter
Basic depth stop
Segment saw blades
The depressed centre of the segment saw
blades enables you to get into areas close to
edges that conventional tools only reach
with extreme difficulty or do not reach at all.
Sawing
Precise sawing
up to edge.
Whether short or longer cuts, whether in the middle or at the very edge: the multifunction tools and the segment saw blades enable you to work everywhere quickly
and easily. Whether you are laying parquet and laminate, shortening a door frame
or enabling access to a plug socket behind a living room cabinet. These all-rounders
can also cut metal. The metal saw blades enable you to cut nails and pipes to the
­required length in no time. And you will be able to do this without great effort but with
the highest precision.
Sawing off parquet close
to edges.
Flush removal of wooden parts.
Cutting plastic pipes to length.
Cutting hinges to length.
Wood
Due to the different width of the plungecutting saw blades, the Bosch Multifunction
Tools PMF 250 CES, PMF 190 E and
Sawing wood is
made easy.
PMF 10,8 LI always ensure perfect results.
Materials: wood, plastic
Saw blade widths: 65, 32, 20, 10 mm
Sawing out ventilation grilles.
Installing door fittings in doors.
Cutouts in patio floors.
Cutouts in furniture.
Metal
can be cut.
The PMF 250 CES, the PMF 190 E and the
PMF 10,8 LI can quickly shorten protruding
pipes and nails. Plasterboard is also no
problem for these multifunction tools.
Materials: wood with nails, metal
(aluminium, copper, sheet metal),
­plasterboard
Saw blade widths: 32, 28, 20, 10 mm
Cutting off nails.
Cutting pipes.
Cutouts in plasterboard.
Adjusting floor trim.
Sawing
Even metal
HM-RIFF segment
saw blade,
85 mm diameter
Diamond-RIFF segment
saw blade,
85 mm diameter
HM-RIFF grout and
mortar remover,
70 mm diameter
HM-RIFF sanding plate
Universal
Make work in hard surfaces easier for yourself: the HM-RIFF (carbide grit) segment
saw blades effortlessly remove old putty
joints and the Diamond-RIFF (diamond grit)
segment saw blade can even work in wall
tiles.
Routing & scraping
Routing and scraping –
coarse and fine.
The Multifunction Tools PMF 250 CES, PMF 190 E and PMF 10,8 LI make even hard applications easy
for you. These all-rounders rout safely and precisely every time thanks to their high power. Simply
mount one of the HM-RIFF segment saw blades and start working. For example, you can easily cut
an additional cable duct in the wall or remove old joint material in the bathroom.
If you want to make especially narrow cuts, the HM-RIFF thin-kerf segment saw blade is ideal. The
Diamond-RIFF segment saw blade is the best choice for cleanly cutting wall tiles. The HM-RIFF sanding
plate is perfect for adapting surfaces.
Removing mortar
or tile adhesive.
Routing cable ducts.
Routing out joints.
Routing out joints in
the tightest of corners.
HCS flexible scraper
HCS rigid scraper
The scraping accessories.
Rigid or flexible, whatever you need:
the scraping accessories enable you
to scrape away anything.
Scraping
Removing carpet residues.
Scraping out silicone joints.
Removing mortar or tile adhesive.
With little effort you can
make space for something new.
If you’ve been meaning to get rid of your old carpet for a while, then now would be the perfect
­opportunity to do so. Afterwards you could deal with the bathroom as well. If you’ve still not had
enough, the chest of drawers in the hall has flaky paint and it isn’t great to look at anymore.
You can use the scraping accessories for the multifunction tools to remove old adhesive and
concrete residues, grout, layers of paint and everything that gets in your way. Prepare your floors,
­bathroom and furniture for a splendid new look.
BIM serrated segment
blade, 100 mm diameter
BIM segment blade,
100 mm diameter
HCS universal joint cutter,
28 x 50 mm
The special accessories enable you to easily
cut soft materials such as polystyrene sheets,
grout, linoleum, rubber or carpet.
Make great cuts
You can make cuts with absolute precision even in the most remote corners of your
home because the shape of the multifunction tools helps you to work accurately
even in tight spaces. These all-rounders have a clear advantage over conventional
power tools, especially in areas close to floors or walls. For example, it is really easy
to precisely cut a floor panel or flush cut insulation material in the attic. These multitalented tools also do a precise job of cutting soft rubber, carpet or joint material.
Cutting carpet to size.
Cutting grout.
Insulation material
(e.g. polystyrene), soft materials
(e.g. cardboard, rubber, leather).
Cutting
everywhere.
The finishing
touch for
a perfect result.
The PMF 250 CES, the PMF 190 E and the PMF 10,8 LI
not only open the way to new ideas, they also enable
you to put them into practice. Whether wood, plastic,
metal, stone or whatever you want to sand: make it really
easy for yourself and choose from the countless sanding
sheets in the Bosch range of accessories. Not only do
they suit the respective material, they also fit all of the
multifunction tools. Just like the fleeces and the
­polishing felt which enable you to clean and
polish surfaces.
Sanding plate with Velcro-type fastening.
The sanding plate is equipped with a durable
micro Velcro-type fastening surface. This
­allows you to change sanding sheets quickly
and easily: pull off the old sanding sheet
and simply attach a new one.
Done.
Accessories for sanding, cleaning and polishing
White Paint helps you
Red Wood is the specialist for
Apply the perfect finish with
The dust extraction thoroughly
when working on paint
all work with wood.
the grit-free cleaning fleece
removes sanding dust and pro-
and the polishing felt.
vides a clear view during work.
Sanding & polishing
and varnish.
grit 60, 80, 120, 180, 240
grit 60, 80, 120, 180, 240
Cleaning fleece
Dust extraction
without grit
for PMF 250 CES and PMF 190 E
Versatile all-rounder:
The PMF 190 E.
190 W motor
Enough power for
Ergonomic design
Softgrip
all applications
Compact and easy-to-handle tool
For comfortable and safe
handling
Oscillation
15,000 – 21,000
oscillations per minute
Bosch Electronic
at 2.8 angular degrees
with continuously
variable preselection
of the oscillation rate
Option to attach
external dust extraction
For dust-free sanding
(available as a separate accessory)
Toolholder
All accessories can be changed
quickly and easily using an Allen key
For material-specific work
PMF 190 E
Dimensions (L x H x W)
284 x 95 x 61 mm
Power input
190 W
Oscillations
15,000 – 21,000/min
Oscillation angle
2.8°
Weight without accessories
approx. 1.2 kg
Bosch Electronic
P
Comes complete with
1 x plastic carrying case
1 x BIM segment saw blade for wood and metal
1 x HCS plunge-cutting saw blade for wood
1 x delta sanding plate
1 x delta sanding sheet set
1 x four-stage depth stop
(for segment saw blades)
The accessory can be inserted in different positions in the toolholder
and adjusted to suit the application. The mounting system uses
­positive engagement to prevent any slipping. Accessory changes are
quick and easy thanks to the single-screw principle.
PMF 190 E
Model
Powerful all-rounder:
The PMF 250 CES.
Additional handle
For a secure and
reliable grip
250 watt motor
Powerful motor
with ­Softstart
Ergonomic design
­Softgrip coating ensures
perfect handling
Bosch SDS system
Quick and easy accessory
changes without the need for
an Allen key
Constant
Electronic
Oscillation
15,000 – 20,000 oscillations
per minute at 2.8 angular
­degrees
Ensures consistently
Continuously variable
high power even under
preselection of the
load
­oscillation rate
For material-specific work
Robust design
Aluminium protects
against damage
Option to attach
external dust extraction
For dust-free sanding
(available as a separate accessory)
PMF 250 CES
Dimensions (L x H x W)
284 x 95 x 61 mm
Power input
250 W
Oscillations
15,000 – 20,000/min
Oscillation angle
2.8°
Weight without accessories
approx. 1.3 kg
SDS system
P
Constant Electronic
P
Comes complete with
1 x plastic carrying case
1 x BIM segment saw blade for wood and metal
1 x HCS plunge-cutting saw blade for wood
1 x HCS rigid scraper
1 x delta sanding plate
1 x four-stage depth stop (for segment saw blades)
1 x handle
The comprehensive range of accessories gives you endless possi­
bilities for putting your ideas into practice. The tool-free changing
function and the additional handle make work even faster and
more effective.
PMF 250 CES
Model
Cordless all-rounder:
The PMF 10,8 LI.
Battery
High-endurance, 10.8 volt
Li-Ion battery with no memory
Ergonomic design
effect and no self-discharge
Compact and easy-to-handle tool
Powerful motor
Quiet 10.8 volt motor
­(approx. 194 watts) with
low vibration
Bosch Eco Electronic
with ­continuously
OSCILLATION
variable ­preselection of
5,000 – 20,000 oscilla-
the oscillation rate
tions per minute at
For material-specific work, easier tool
2.8 angular degrees
­control and longer battery runtime
Option to attach
external dust extraction
For dust-free sanding
(available as a separate accessory)
PMF 10,8 LI
Dimensions (L x H x W)
274 x 71 x 47 mm
Battery voltage
10.8 V
Oscillations
5,000 – 20,000/min
Oscillation angle
2.8°
Weight without accessories
approx. 0.9 kg
The advantages of lithium-ion technology at a glance
Bosch Electronic
P
Bosch Eco Electronic
P
Lithium-ion technology
Bosch tools with lithium-ion technology are instantly ready to use practically all
of the time. Regardless of whether the battery is fully charged, half charged
or empty – you can put it in the charging station without having to worry about
it because self-discharge and memory effect are a thing of the past.
P
Charge time
60 mins
Comes complete with
Their short charge times mean that Bosch cordless tools with lithium-ion
­technology are immediately ready to use, and you can use them for about six
times longer than conventional NiCd batteries. For example, a fully charged
lithium-ion battery will still have a capacity of at least 85% even after 4 months
on standby.
1 x plastic carrying case, 1 x BIM segment saw blade for
wood + metal, 1 x HCS plunge-cutting saw blade for wood,
1 x delta sanding plate, 1 x delta sanding sheet set,
1 x battery pack, 1 x Li-Ion quick charger
The new, innovative Bosch Eco Electronic
If the motor does not encounter load at the maximum
speed, it automatically drops to the Eco Electronic no-load
Eco Electronic
speed. When load is then applied again, it instantly
­accelerates back to full speed. This ensures a considerably longer battery
runtime and easier tool control.
Full power at all times
High power, low weight
Same power at
half the size
Long lifetime
up to
+ 50%
PMF 10,8 LI
Model
Versatile –
also when it comes to the accessories!
Sawing
ACZ 100 BB
ACZ 85 EB
BIM segment saw blade for
wood + metal,
100 mm diameter
BIM segment saw blade for
wood + metal,
85 mm diameter
HCS segment saw blade for
wood, 85 mm diameter
ACZ 85 EC
AIZ 65 BB
AIZ 28 EB
AIZ 32 BB
≤ 26mm
≤ 20mm
≤ 20mm
Part no.
2 609 256 970
Part no.
2 609 256 943
Part no.
2 609 256 944
BIM plunge-cutting saw
blade for
wood + metal, 65 x 40 mm
Part no.
2 609 256 985
BIM plunge-cutting
saw blade for
wood + metal, 28 x 50 mm
Part no.
2 609 256 945
BIM plunge-cutting
saw blade for
hardwood, 32 x 40 mm
Part no.
2 609 256 946
Routing and scraping
AVZ 70 RT
HM-RIFF grout and mortar
remover,
70 mm diameter
Part no.
2 609 256 C51
HM-RIFF sanding plate
Universal
Part no.
2 609 256 953
Diamond-RIFF
segment saw blade,
85 mm diameter
Part no.
2 609 256 972
HM-RIFF segment
saw blade,
85 mm diameter
Part no.
2 609 256 952
HM-RIFF segment
saw blade,
85 mm diameter
Part no.
2 609 256 C53
HM-RIFF segment
saw blade,
65 mm diameter
Part no.
2 609 256 975
HM-RIFF plunge-cutting
saw blade,
32 x 30 cm
Part no.
2 609 256 C48
AVZ 78 RT
ACZ 85 RD
ACZ 85 RT
ACZ 85 RTT
ACZ 65 RT
AIZ 32 RT
Scraping
HCS rigid scraper,
52 x 26 mm
Part no.
2 609 256 954
HCS flexible scraper,
52 x 45 mm
Part no.
2 609 256 955
BIM serrated segment
blade, 100 mm diameter
Part no.
2 609 256 976
BIM segment blade,
100 mm diameter
Part no.
2 609 256 C50
HCS universal joint cutter,
28 x 50 mm
Part no.
2 609 256 974
ATZ 52 SC
ATZ 52 SFC
Cutting
ACZ 100 SWB
ACZ 100 SB
AIZ 28 SC
Silicon
Sanding and polishing
Delta sanding plate,
93 mm
Part no.
2 609 256 956
Red Wood sanding sheets,
93 mm
Part no.
2 609 256 957
White Paint sanding sheets,
93 mm
Part no.
2 609 256 958
Cleaning fleece without
coated abrasive,
93 mm
Part no.
2 608 604 496
AVI 93 G
PVC
Polishing felt,
93 mm
Part no.
2 608 613 016
Dust extraction for
PMF 10,8 LI
Part no.
2 609 256 986
Dust extraction for
PMF 250 CES and
PMF 190 E
Part no.
2 609 256 C55
Sets
1 BIM segment saw blade Wood and Metal ACZ 85 EB
1 BIM plunge-cutting saw blade Wood and Metal AIZ 28 EB
1 HCS scraper ATZ 52 SFC
10 Red Wood-top sanding sheets
10 White Paint sanding sheets
Part no.
2 609 256 977
Tiling Set
1
1
1
1
HM-RIFF segment saw blade ACZ 85 RT
HM-RIFF sanding plate AVZ 78 RT
HCS scraper ATZ 52 SFC
BIM plunge-cutting saw blade Metal AIZ 20 AB
Part no.
2 609 256 978
Flooring/Fitting Set
1
1
1
1
BIM segment saw blade Wood and Metal ACZ 85 EB
BIM plunge-cutting saw blade Hard Wood AIZ 32 BB
HCS plunge-cutting saw blade Wood AIZ 32 EC
HCS scraper ATZ 52 SC
Part no.
2 609 256 979
All-in-One Set