eBridge1CR –
IP over Coax
­Receiver
The eBridge1CR – IP over Coax receiver is
designed for use with eBridge1CT to enable
fast 10/100Base-T Ethernet digital commu­
nication over coax cable. This plug and
play unit facilitates system upgrades from
analog to IP cameras/devices utilizing
existing legacy Coax and eliminating the
costs and labor associated with installing
new network cabling. In addition data
transmission is extended to 2,000’ (over five
times the 100m/328’ Ethernet maximum
length), eliminating the need for repeaters.
eBridge units will transmit Composite Video
Signal with Ethernet data simultaneously.
Specifications
Input:
– 12VDC to 24VDC Class 2 power supply (polarity
not observed) or 16VAC to 24VAC Class 2 plug-in
transformer.
Power Consumption:
– 12VDC/275mA, 24VDC/110mA, 16VAC/375mA,
24VAC/200mA.
SLOCTM Compliant:
– Incorporates *slocTM (Security Link over Coax)
technology.
Ethernet:
– Connectivity: RJ45, auto-crossover.
– Wire type: 4-pair CAT-5 or better structured cable.
– Distance: up to 328 ft. (100 m).
– Speed: 10/100BaseT, half/full duplex, auto
negotiation.
– Throughput is rated to pass 25mbps of data at
distances up to 1,500 ft. With proper headend
equipment, multiple Megapixel cameras can be
used.
Coax:
– Distance: up to 1,500 ft.
– Connectivity: BNC, RG-59/U or similar.
LED Indicators:
– Blue LED - Coax link connection.
– Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
– Green LED - Power.
Environmental:
– Operating Temperature:
14ºF to 122ºF (-10ºC to +50ºC).
– Storage Temperature:
-22º to 158ºF (-30º to +70ºC) Storage.
– Humidity: 20 to 85%, non-condensing.
* sloc is a registered trademark of Intersil Corporation.
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
Electrical:
–B
TU/Hr.: VDC: 1.69 - 4.46 BTU/Hr.
Electrical (cont’d):
– VAC: 2.46 - 3.07 BTU/Hr.
Accessories:
–C
omposite video cable (included) – enables
simultaneous composite video signal over the
same Coax.
–P
ower connector.
Applications:
–R
etrofit digital IP cameras in an analog CCTV
installation.
–W
orks with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
–E
xtend Network link distance in an industrial
environment.
–U
pgrade deployed CCTV Coax to a digital
network for Retail, Casinos, Airports, Schools,
Hospitals, etc.
–E
nables simultaneous transmission of composite
and digital IP video.
Mechanical:
– L ightweight molded fiberglass reinforced polyester
enclosure is corrosion resistant and does not
contain halogens.
–D
imensions (W x L x H approx.):
2.5” x 3.8” x 1” (63.5 mm x 96.52 mm x 25.4 mm)
–P
roduct weight (approx.): 3.4 oz. (0.10 kg).
– S hipping weight (approx.): 5.4 oz. (0.15 kg).
Additional eBridge models:
–e
Bridge1CT: Single port ethernet transceiver (use
with eBridge receivers).
–e
Bridge1CRT: Single port ethernet receiver and
transceiver kit.
–e
Bridge4CR: Four (4) port ethernet receiver.
–e
Bridge16CR: Sixteen (16) port ethernet receiver.
C-Tick Approved - Z1409
© 2013 Sony Corporation. All rights reserved. Reproduction in
whole or in part without permission is prohibited. Features and
specifications are subject to change without notice. All nonmetric weights and measurements are approximate. Sony,
‘make.believe’, IPELA, DEPA, Exmor and their respective logos
are trademarks of Sony Corporation. HDMI and High-Definition
Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC. All other trademarks are the property of
their respective owners.
European Conformity
About Sony PSE
Sony PSE is the leading supplier of AV/IT solutions to businesses
across a wide variety of sectors including, Media and
Broadcast, Video Security and Retail, Transport & Large Venue
markets. It delivers products, systems and applications to
enable the creation, manipulation and distribution of digital
audio-visual content that add value to businesses and their
customers. With over 25 years’ experience in delivering
innovative market-leading products, Sony PSE is ideally placed
to deliver exceptional quality and value to its customers.
Sony’s PSE division, its systems integration arm, offers its
customers access to the expertise and local knowledge
of skilled professionals across Europe. Collaborating with
a network of established technology partners, Sony PSE
delivers end to end solutions that address the customer’s
needs, integrating software and systems to achieve each
organisations’ individual business goals. For more information
please visit www.pro.sony.eu