Video | DINION HD 1080p HDR
DINION HD 1080p HDR
www.boschsecurity.com
The high dynamic range DINION HD 1080p camera
combines intelligence with adaptive video processing
to bring you high performance content-based imaging
in any security or surveillance scenario, day or night.
The camera uses an internal feedback system based
on the intelligent analysis of the scene, to re-tune the
video processing. This provides better detail in the
areas that matter and better all-round performance.
Functions
High Dynamic Range
The High Dynamic Range (HDR) of the camera means
that you can view details in the bright and the dark
areas of a scene at the same time. HDR is based on a
dual exposure process that captures more details in
highlights and shadows even under challenging
lighting conditions. The result is that you can
distinguish objects and features easily.
Content-Based Imaging Technology
Content-Based Image Technology (C-BIT) is used to
radically improve image quality in all lighting
conditions and to identify areas for enhanced
processing. The camera examines the scene using
intelligent video analytics and provides feedback to retune the image processing. This provides better detail
in the areas that matter and better all-round
u
High Dynamic Range to see details in bright and
dark areas simultaneously
u
Intelligent noise reduction reduces bandwidth and
storage requirements by up to 30%
u
Auto back focus for fast installation
u
Content-based scene analysis optimizes the image
processing
performance. The intelligent Automatic Exposure (iAE)
technology, for example, allows you to view moving
objects in bright and dark areas of a scene.
Low bandwidth consumption
The intelligent Dynamic Noise Reduction (iDNR)
actively analyzes the contents of the scene to reduce
bandwidth and storage requirements. This removes
noise artifacts so effectively that compression
efficiency is very high (up to 30% improvement). This
results in reduced-bandwidth streams that still retain a
high image quality and smooth motion. The camera
provides the most usable image possible by cleverly
optimizing the detail-to-bandwidth ratio via temporal
and spatial noise filtering.
Compression parameters for up to eight user-definable
regions can be set. This allows uninteresting regions
to be highly compressed, thus lowering bandwidth
consumption and storage requirements. Important
regions can be tuned for best image quality, thus
allowing the user to allocate bandwidth to important
parts of the scene.
Simple installation
The camera has a very intuitive user interface that
allows fast and easy configuration. Six configurable
user modes are provided with the best settings for a
variety of applications:
2 | DINION HD 1080p HDR
• Outdoor – general day-to-night changes with sun
highlights and street lighting
• Indoor – general day-to-night changes without sun
highlights and street lighting
• Motion – monitoring traffic or fast moving objects;
motion artifacts are minimized
• Lowlight – optimized for sufficient details at low light.
• Intelligent AE – for people moving in front of a bright
background.
• Vibrant – enhanced contrast, sharpness and
saturation
The auto-focus lens wizard makes it easy for an
installer to accurately focus the camera for both day
and night operation. The wizard is activated from the
web browser or from the on-board camera push
button making it easy to choose the workflow that
suits best. The automatic motorized back focus
adjustment with 1:1 pixel mapping ensures the camera
is always focused accurately.
Streams
The innovative multi-streaming feature delivers various
H.264 streams together with an M‑JPEG stream. These
streams facilitate bandwidth-efficient viewing and
recording as well as integration with third-party video
management systems.
An upright mode can be selected for the second
stream. In this mode an image of 400 x 720 (9:16
aspect ratio) is cropped from the full sensor image.
When the scene to be monitored is suitable to this
mode, the bandwidth and storage requirements are
reduced.
Storage management
Recording management can be controlled by the
Bosch Video Recording Manager (VRM) or the camera
can use iSCSI targets directly without any recording
software.
Edge recording
The internal MicroSD card slot supports up to 2 TB of
storage capacity. A microSD card can be used for local
alarm recording. Pre-alarm recording in RAM reduces
recording bandwidth on the network, or — if microSD
card recording is used — extends the effective life of
the storage medium.
Intelligent Video Analytics
The camera uses the latest generation of the Bosch
Intelligent Video Analysis (IVA) software. This IVA
system is the guard-assistant system of choice when
reliable indoor or outdoor video analytics is needed.
The state-of-the-art system reliably detects, tracks,
and analyzes moving objects while suppressing
unwanted alarms from spurious sources in the image.
The face detection feature detects faces in the scene
and forwards a high quality JPEG image of the best
shot of each face when the face disappears from the
scene.
Retrospective forensic search capabilities are available
remotely from the web browser or the Bosch Video
Client.
Regions of interest
Two Regions of Interest (ROI) can be user defined.
The remote electronic pan, tilt and zoom controls
allow you to select specific areas of the parent image.
These regions produce separate streams for remote
viewing and recording. These streams, together with
the main stream, allow the operator to separately
monitor the most interesting part of a scene while still
retaining situational awareness.
The IVA Intelligent tracker can also follow objects
within the defined regions of interest. The Intelligent
tracker can autonomously detect and track moving
objects or the user can click on an object which the
Intelligent tracker will then follow.
Access Security
Password protection with three levels and 802.1x
authentication is supported. To secure Web browser
access, use HTTPS with a SSL certificate stored in the
camera. The video and audio communication channels
can be independently AES encrypted with 128-bit keys
by installing the optional encryption site license.
Surveillance software
There are many ways to access the camera’s video and
IVA-based features: using a web browser, with the
Bosch Video Management System, with the Bosch
Recording System, with the free-of-charge Bosch Video
Client, or with the video security mobile App.
The Bosch Video Client PC surveillance software offers
a user-friendly interface to support easy installation
and configuration. It also provides easy live viewing of
multiple cameras, playback, forensic search and
export.
Access to IVA metadata is available to integrators via
RTSP.
Video security App
The Bosch video security mobile App has been
developed to enable Anywhere access to HD
surveillance images allowing you to view live images
from any location. The App is designed to give you
complete control of all your cameras, from panning
and tilting to zoom and focus functions. It’s like taking
your control room with you.
This App, together with the separately available Bosch
transcoder, will allow you to fully utilize our dynamic
transcoding features so you can play back images even
over low-bandwidth connections.
Connections
The camera conforms to the ONVIF (Open Network
Video Interface Forum) Profile S specification which
guarantees interoperability between network video
products regardless of manufacturer. For trouble-free
network cabling, the camera supports Auto-MDIX
which allows the use of straight or cross-over cables.
Camera power is supplied via PoE (Power-overEthernet) or via the 24 VAC/12 VDC connector.
3 | DINION HD 1080p HDR
Third-party integrators can easily access the internal
feature set of the camera for integration into large
projects. Visit the Bosch Integration Partner Program
(IPP) website (ipp.boschsecurity.com) for more
information.
Installation/configuration notes
Controls
Some typical applications
• Tunnels – viewing details in bright and dark areas
• Entrances and exits – identification with strong
backlight
• Traffic – capturing moving vehicles at night
4
5
6|4
5
6
E
T
H
P
o
E
D A
A L
T A
A R
M
2
3|1
2
3
µSD
1
- +
Certifications and approvals
12VDC INSTALL
24VAC
MENU
HD Standards
Complies with the SMPTE 274M-2008 Standard in:
Resolution: 1920x1080
Scan: Progressive
Color representation: complies with ITU-R BT.709
Aspect ratio: 16:9
Frame rate: 25 and 30 frames/s
Complies with the 296M-2001 Standard in:
–
–
–
–
–
Resolution: 1280x720
Scan: Progressive
Color representation: complies with ITU-R BT.709
Aspect ratio: 16:9
Frame rate: 25 and 30 frames/s
Standards
1
Data (RS485/422/232)
6
Reset button
2
Alarm in, relay out
7
Service video out
3
10/100 Base-T Fast
Ethernet
8
Power supply input
4
MicroSD card slot
9
Earth
5
Menu button
10
Audio in / Audio out
Dimensions
Emission
EN 55022 Class B
FCC Part 15 Class B
Immunity
EN 50130-4 (PoE, +12 VDC, 24 VAC)*
EN 50121-4
Safety
EN 60950-1
UL 60950-1 (2nd edition)
CAN/CSA-C 22.2 No. 60950-1
Vibration
Camera with lens as per IEC 60068-2-6 (5 m/s2,
operational)
ONVIF
conformance
EN 50132-5-2; IEC 62676-2-3
66 (2.60)
–
–
–
–
–
140 (5.51)
* Chapters 7 and 8 (mains voltage supply requirement) are not applicable to the camera.
However, if the system in which this camera is used needs to comply with this standard,
then any power supplies used must comply with this standard.
Region
Certification
Europe
CE
USA
FCC
UL
78 (3.07)
mm (in)
4 | DINION HD 1080p HDR
Technical specifications
Color
0.25 lx (0.025 fc)
Electrical
Monochrome
0.08 lx (0.008 fc)
Day/Night
Color, Monochrome, Auto
Power Supply
24 VAC 50/60 Hz
12 VDC
Power-over-Ethernet 48 VDC nominal
Current Consumption
500 mA (12 VDC)
450 mA (24 VAC)
175 mA (PoE 48 VDC)
White Balance
ATW (2500 to 10000K), ATWhold and
manual
Indoor and Outdoor ATW
Power Consumption
6 W (12 VDC)
10.8 W (24 VAC)
8.4 W (PoE 48 VDC)
Shutter
Automatic Electronic Shutter (AES)
Fixed (1/30 [1/25] to 1/15000)
selectable
Default shutter
Backlight compensation
Off/Auto/IntelligentAE
Wide dynamic range
On/off
Noise reduction
Intelligent Dynamic Noise Reduction
(iDNR) with separate temporal and spatial
adjustments
Contrast enhancement
On/off
Sharpness
Sharpness enhancement level selectable
Dynamic Range
90 dB typical
Privacy Masking
Four independent areas, fully
programmable
Video Motion Analysis
Intelligent Video Analysis
Sensor
Type
1/3‑inch CMOS HD
Pixels
2048 x 1536 (3MP)
Video streams
Video compression
H.264 (ISO/IEC 14496-10); M- JPEG,
JPEG
Streaming
Multiple configurable streams in H.264
and M-JPEG, configurable frame rate and
bandwidth.
Regions of Interest (ROI)
Overall IP Delay
Min. 120 ms, Max. 240 ms
GOP structure
IP, IBP, IBBP
Encoding interval
1 to 30 (25) ips
Audio
Standard
AAC
G.711, 8kHz sampling rate
L16, 16kHz sampling rate
Resolutions (H x V)
• 1080p HD
1920 x 1080
Signal-to-noise ratio
> 50 dB
• 960p HD 4:3
(cropped)
1280 x 960
Audio Streaming
Full duplex / half duplex
• 720p HD
1280 x 720
• D1 4:3 (cropped)
704 x 480
• SD upright
(cropped)
400 x 720
• 480p SD
Encoding: 704 x 480;
Displayed: 854 x 480
• 432p SD
768 x 432
• 288p SD
512 x 288
• 240p SD
Encoding: 352 x 240;
Displayed: 432 x 240
• 144p SD
256 x 144
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Minimum illumination (30 IRE)
Input/output
Audio
1 x mono line in, 1 x mono line out
• connector
3.5 mm stereo jack
• signal line in
12 kOhm typical, 1 Vrms max
• signal line out
1 Vrms at 1.5 kOhm typical,
Alarm
• activation
voltage
Relay
• voltage
Data port
2 inputs
+5 VDC to +40 VDC
(+3.3 VDC with DC-coupled 22 kOhm pullup resistor)
1 output
30 VAC or +40 VDC max.
Maximum 0.5 A continuous, 10VA
RS‑232/422/485
5 | DINION HD 1080p HDR
Local Storage
Varifocal Megapixel Lens
Internal RAM
10 s pre-alarm recording
Memory card slot
Supports SDHC and SDXC microSD cards
Recording
Continuous recording, ring recording.
alarm/events/schedule recording
Order number VLG-2V1803-MP5
Accessories
EX12LED‑3BD‑8M Infrared Illuminator
EX12LED IR Illuminator, 850 nm, 30 deg beam
Software Control
Order number EX12LED-3BD-8M
Unit Configuration
Via web browser or Configuration Manager
Software update
Remote programmable
EX12LED‑3BD‑8W Infrared Illuminator
EX12LED, IR Illuminator, 850 nm, 60 deg beam
Order number EX12LED-3BD-8W
Network
Protocols
5 Megapixel, 1.8-3 mm varifocal, f1.8, 1/2.5-inch lens,
DC iris, IR corrected
EX12LED‑3BD‑9M Infrared Illuminator
IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP,
IGMP V2/V3, ICMP, RTSP, FTP, Telnet,
ARP, DHCP, SNTP, SNMP (V1, MIB‑II),
802.1x, SMTP, iSCSI, UPnP (SSDP)
Order number EX12LED-3BD-9M
Encryption
TLS 1.0, SSL, AES (optional)
EX12LED, IR Illuminator, 940 nm, 60 deg beam
Ethernet
STP, 10/100 Base-T, auto-sensing, half/
full duplex, RJ45
PoE supply
IEEE 802.3af (802.3at Type 1)
Power level: Class 3
Connectivity
ONVIF Profile S
Auto-MDIX
EX12LED‑3BD‑9W Infrared Illuminator
Order number EX12LED-3BD-9W
UPA-2410-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 10 VA Out
Order number UPA-2410-60
UPA-2430-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 30 VA Out
Order number UPA-2430-60
Mechanical
Dimensions (H x W x L)
EX12LED IR Illuminator, 940 nm, 30 deg beam
78 x 66 x140 mm (3.07 x 2.6 x 5.52 inch)
without lens
Weight
690 g (1.52 lb) without lens
Color
RAL 9007 Metallic Titanium
Tripod Mount
Bottom and top 1/4-inch 20 UNC
UPA-2450-60 Power Supply, 120 V, 60 Hz
Indoor, 120 VAC, 60 Hz In; 24 VAC, 50 VA Out
Order number UPA-2450-60
UPA-2450-50 Power Supply, 220 V, 50 Hz
Indoor, 220 VAC, 50 Hz In; 24 VAC, 50 VA Out
Order number UPA-2450-50
S1374 Adapter
Environmental
converts C mount lens to CS mount camera
Operating Temperature
-20°C to +50°C (-4°F to 122°F)
Storage Temperature
-30°C to +70°C (-22°F to +158°F)
Operating Humidity
20% to 93% RH
Storage Humidity
up to 98% RH
Ordering information
DinionHD 1080p HDR
1/3-inch CMOS, 1080p, HDR, H.264 dual stream, IVA,
PoE
Order number NBN-932V-IP
Varifocal Megapixel Lens
3 Megapixel, 3.8-13 mm varifocal, f1.4, 1/2-inch lens,
DC iris
Order number VLG-3V3813-MP3
Varifocal Megapixel Lens
5 Megapixel, 9-40 mm varifocal, f1.5, 1/2.5-inch lens,
DC iris, IR corrected
Order number VLG-4V0940-MP5
Order number S1374
S1460 Service/Monitor Cable
2.5 mm connector to BNC for analog and IP cameras,
1m
Order number S1460
VJT-XTCXF
VideoJet XTC XF, H.264 video transcoder
Order number VJT-XTCXF
Software Options
BVIP AES 128 Bit Encryption
BVIP AES 128‑bit encryption site license. This license
is required only once per installation. It enables
encrypted communication between BVIP devices and
management stations.
Order number MVS-FENC-AES
6 | DINION HD 1080p HDR
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 2013 | Data subject to change without notice
7711093515 | en, V4, 28. May 2013
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
al.securitysystems@bosch.com
www.boschsecurity.com.cn
www.boschsecurity.com