advertisement
MADE FOR THE TRADE!
™
professional FIBER
™
Series instruments
XL fiberTOOLS
™
Series
Instruments Designed for
Fiber Optic Cable Testing.
The XL fiberTOOLS™ are designed for the professional to perform installation and maintenance measurements on fiber optic cabling networks. The instrument family consists of individual devices (optical power meters,
850/1300nm LED sources, 1310/1550nm Laser sources,
Visual Fault Locator) and complete Insertion Loss Test Sets.
The XL fiberTOOLS™ are designed to accurately measure optical power levels and link loss on multimode and singlemode cabling networks. These full feature general purpose fiber optic instruments are easy to operate and economically priced to outfit all technicians performing fiber optic installation and maintenance.
560XL
Fiber Optic Power Meter
• Easy to use - three buttons control all functions
• Long battery life
• Loss measurements in (dB); power measurements in (dBm)
• 0.01dB measurement resolution
Optical Specifications
• Snap on connector interface adapts to FC, SC and ST connectors. Contact
Greenlee for other available adapters.
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
Calibration Wavelengths
Power Range
Accuracy
Linearity at:
Resolution
Power Requirements
Connector Interface
850nm, 1300nm, 1310nm and 1550nm
+3 dBm to -60 dBm
±0.25dB
+3dBm to -3dBm
-3dBm to -50dBm
-50dBm to -60dBm
±0.5dB
±0.05dB
±0.5dB
0.01dB
Two AA size 1.5V batteries
(approx. 100 hours continuous operation)
FC, SC or ST
Environmental Specifications
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
CE
-15º C to +55º C
-35º C to +70º C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1:1992; EN55011,Group1,
Class A EN50082-1: 1992 IEC 801-2, -3, -4
Easy To Use
Three Buttons Control
ALL Functions!
567XL
Silicon Fiber Optic Power Meter
Optical Specifications
Detector Type
Calibration Wavelengths
Power Range
Accuracy
Linearity at:
Resolution
Power Requirements
Connector Interface
3 x 3.5 mm Silicon
635nm, 780nm, and 850nm
+3 dBm to -60 dBm
±0.25dB
+3dBm to -3dBm
-3dBm to -50dBm
-50dBm to -60dBm
0.01dB
Two AA size 1.5V batteries
±0.5db
±0.05db
±0.5db
(approx. 100 hours continuous operation)
SOC
Environmental Specifications
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
CE
-15º C to +55º C
-35º C to +70º C
0 to 95% non-condensing
7.2 x 14.2 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1:1992;
EN55011,Group1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
568XL
• Easy to use - three buttons control
all functions
• Loss measurements in (dB);
power measurements in (dBm)
• 0.01dB measurement resolution
• Snap on connector interface adapts to FC, SC and ST connectors. Contact
Greenlee for other available adapters.
High Intensity Optic Power Meter
• Long battery life
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
• Easy to use - three buttons control all functions
• Multi-Wavelength Storage: Store and recall reference power levels for faster, more efficient measurements!
• 0.01dB measurement resolution
• Loss measurements in (dB); power
measurements in (dBm)
• Snap on connector interface adapts to FC, SC and ST connectors. Contact Greenlee for other available adapters.
• Long battery life
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
Optical Specifications
Detector Type
Calibration Wavelengths
Power Range
Linearity at:
(1310nm and 1550nm)
Absolute Accuracy
Wavelength Dependence
Polarization Dependence
Resolution
Power Requirements
Connector Interface
2 mm indium-arsenide (InGaAs)
980nm, 1310nm, and 1550nm
+25 to -30dBm (1310nm and 1550nm);
+25 to -27dBm measurement range at 980nm.
To avoid thermal damage, limit exsposure high power (greater than +23dBm) to less than
30 minutes.; +25 to -27dBm (980nm only)
+25dBm to +22dBm ±1.0dB
+22dBm to +18dBm
+18dBm to +10dBm
+10dBm to -30dBm
±0.25dB at calibration conditions
±0.5dB
±0.2dB
±0.05dB
975 to 985nm
1270 to 1330nm
1500 to 1625nm
<0.1dB
±0.01dB
Two AA size 1.5V batteries
0.025dB/nm
0.0033dB/nm
0.0016dB/nm
(approx. 100 hours continuous operation)
SOC
Environmental Specifications
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
CE
-15º C to +55º C
-35º C to +70º C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1:1992; EN55011,Group1,
Class A EN50082-1: 1992 IEC 801-2, -3, -4 www.greenlee.com
• 850/1300nm wavelengths
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• Fixed connector interface FC, SC or ST
• Long battery life - approx. 80 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
• 1310/1550nm wavelengths
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• Fixed connector interface FC, SC or ST
• Long battery life - approx. 80 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
570XL
850/1300nm LED Source
Optical Specifications
Center Wavelength
Range (Typical)
Max. Spectral Width (FWHM)
Stability (1 hour)
Typical Power Output
100/140um
62.5/125um
50/125um
Modular Frequency
Power Requirements
Connector Interface
850nm
840nm to 880nm
55nm
±0.05dB
-13dBm
-13dBm
-14dBm
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
(approx. 80 hours continuous operation)
FC, SC or ST
1300nm
1270nm to 1345nm
150nm
±0.05dB
-20dBm
-20dBm
-21dBm
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
(approx. 80 hours continuous operation)
FC, SC or ST
Environmental Specifications
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
CE
-15º C to +55º C
-35º C to +70º C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1:1992; EN55011,Group1, Class A
EN50082-1: 1992 IEC 801-2, -3, -4
580XL
1310/1550nm Laser Source
Optical Specifications
Center Wavelength
Range (Typical)
Max. Spectral Width (FWHM)
Stability (1 hour)
Typical Power (9/125)
Minimum
Typical
Modular Frequency
Power Requirements
Connector Interface
1310nm
1280nm to 1340nm
<5nm
±0.05dB
-8dBm
-7dBm
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
(approx. 80 hours continuous operation)
FC, SC or ST
Environmental Specifications
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
CE
CDRH Laser Class
-15º C to +55º C
-35º C to +70º C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1:1992; EN55011
Group1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Class 1
1550nm
1520nm to 1580nm
<5nm
±0.05dB
-8dBm
-7dBm
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
(approx. 80 hours continuous operation)
FC, SC or ST
1310/1550nm Laser Source
573XL
650nm LED Source for Large Core
Plastic and Glass Fiber
• 650nm wavelength
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• ST connector interface
• Long battery life - approx. 24 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
Optical Specifications
Center Wavelength
Range (Typical)
Max. Spectral Width (FWHM)
Stability (1 hour)
Power Output into
MM 200/300 SI Fiber
Modular Frequencies
Power Requirements
Connector Interface
650nm
630nm to 670nm
<20nm
±0.05dB
-15dBm ±0.5dB
270 kHz, 1 kHz and 2 kHz ±0.5dB
Two AA size 1.5V batteries
(approx. 24 hours continuous operation)
ST
Environmental Specifications
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
CE
-15º C to +55º C
-35º C to +70º C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1:1992; EN55011,Group1,
Class A EN50082-1: 1992 IEC 801-2, -3, -4
577XL
M90
850nm LED Source with
M90 Launch Condition
using 62.5/125 Fiber
• 850nm wavelength
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• Universal connector interface
• Long battery life - approx. 24 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
Optical Specifications
Center Wavelength
Range (Typical)
Max. Spectral Width (FWHM)
Stability (1 hour)
Launch Profile
Power Output into MM 62.5/125
GI fiber
Modular Frequencies
Power Requirements
Connector Interface
850nm
840nm to 880nm
<55nm
±0.05dB
M90
-13dBm ±0.5dB
270 kHz, 1 kHz and 2 kHz ±5%
Two AA size 1.5V batteries
(approx. 24 hours continuous operation)
Universal connector interface, physical contact (UCI-PC)
Environmental Specifications
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
CE
-15º C to +55º C
-35º C to +70º C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1:1992; EN55011,Group1,
Class A EN50082-1: 1992 IEC 801-2, -3, -4
577XL
AS100
850nm LED Source with
AS-100 Launch Condition
using 100/140 Fiber
• 850nm wavelength
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• Universal connector interface
• Long battery life - approx. 24 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
Optical Specifications
Center Wavelength
Range (Typical)
Max. Spectral Width (FWHM)
Stability (1 hour)
Launch Profile
Power Output into MM 100/140
GI fiber
Modular Frequencies
Power Requirements
Connector Interface
850nm
840nm to 880nm
<55nm
±0.05dB
AS100
-13dBm ±0.5dB
270 kHz, 1 kHz and 2 kHz ±5%
Two AA size 1.5V batteries
(approx. 24 hours continuous operation)
Universal connector interface, physical contact (UCI-PC)
Environmental Specifications
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
CE
-15º C to +55º C
-35º C to +70º C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1:1992; EN55011,Group1,
Class A EN50082-1: 1992 IEC 801-2, -3, -4 www.greenlee.com
5670XL
Multimode Fiber Optic Test Set
5680XL
• Insertion loss test set for multimode fiber
• 850/1300nm loss measurements
• Connector for FC, SC or ST
• Rugged package design
• Easy-to-use portable package
• Economically priced
5670-FC Includes
560XL
570XL-FC
T1020
914B
5670-SC Includes
560XL
570XL-SC
1062
914B
5670-ST Includes
560XL
570XL-ST
T1030
914B
Singlemode Fiber Optic Test Set
5890XL
Optical Power Meter
850/1300nm LED Source w/FC Connector
FC/PC SOC Adapter
Carrying Case
Optical Power Meter
850/1300nm LED Source w/SC Connector
SC/PC SOC Adapter
Carrying Case
Optical Power Meter
850/1300nm LED Source w/ST Connector
ST/PC SOC Adapter
Carrying Case
• Insertion loss test set for singlemode fiber
• 1310/1550nm loss measurements
• Connector for FC, SC or ST
• Rugged package design
• Easy-to-use portable package
• Economically priced
5680-FC Includes
560XL
580XL-FC
T1020
914B
5680-SC Includes
560XL
580XL-SC
1062
914B
5680-ST Includes
560XL
580XL-ST
T1030
914B
Optical Power Meter
1310/1550nm Laser Source w/FC Connector
FC/PC SOC Adapter
Carrying Case
Optical Power Meter
1310/1550nm Laser Source w/SC Connector
SC/PC SOC Adapter
Carrying Case
Optical Power Meter
1310/1550nm Laser Source w/ST Connector
ST/PC SOC Adapter
Carrying Case
Multimode and Singlemode Fiber Optic Test Set
• Insertion loss test set for multimode and singlemode fiber
• 850/1300nm Loss measurements
• 1310/1550nm Loss measurements
• Connector for FC, SC or ST
• Rugged package design
• Easy-to-use portable package
• Economically priced
5890-FC Includes
560XL
570XL-FC
580XL-FC
T1020
915B
5890-SC Includes
560XL
570XL-SC
580XL-SC
1062
915B
5890-ST Includes
560XL
570XL-ST
580XL-ST
T1030
915B
Optical Power Meter
850/1300nm LED Source w/FC Connector
1310/1550nm Laser Source w/FC Connector
FC/PC SOC Adapter
Carrying Case
Optical Power Meter
850/1300nm LED Source w/SC Connector
1310/1550nm Laser Source w/SC Connector
SC/PC SOC Adapter
Carrying Case
Optical Power Meter
850/1300nm LED Source w/ST Connector
1310/1550nm Laser Source w/ST Connector
ST/PC SOC Adapter
Carrying Case
Connector
Cleaning Tools
948 Connector Reel Cleaner
The Reel Cleaner is an all-in-one connector cleaning tool. A complete self-contained unit requiring no additional components to clean fiber optic connectors. Recommended for cleaning FC, SC and
ST connectors. To clean a connector, the user opens the shutter by gripping the lever and then sliding the connector end face along the exposed cleaning surface while gripping the lever.
170XL
Visual Fault Finder
• Continuous wave output mode for steady
fault location
• Find breaks to 5km
• Blinking output mode increases
viewing contrast
• Easy-to-use quick interface fits all 2.5mm
connector interfaces (FC, SC, ST)
• 1.0mW output power
Optical Specifications
• Ergonomic rotary switch permits easy
one-handed operation
• Rugged, compact and splash-proof
aluminum design
• Two AA batteries provide 48 hours
continuous operation
• Nylon belt holster included
Light Source Type
Center Wavelength
Range (Typical)
Max. Spectral Width (FWHM)
Power Output
655nm Red laser Diode
655nm
645nm to 655nm
<5nm
Max. into SMF-28 Fiber 1.0mW (0dBm)
Min. CW Output Mode 316uW (-5dBm)
Blink Frequencies in MOD mode <3kHz approximate
Power Requirements Two AA size 1.5V batteries (approx.
Connector Interface
48 hours continuous operation)
Standard "Quick Connect" universal
2.5mm receptacle
Environmental Specifications
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
CDRH Laser Class
CE
-10º C to +50º C
-40º C to +60º C
0 to 95% non-condensing
Length: 22 cm (9.0 in.)
Diameter: 2.54 cm (1 in.)
200g (7.0 oz.)
Class IIIa
IEC 60-1-2 portion of the EN50082-1 ESD immunity requirement EN50082-1: 1992 IEC
801-2, -3, -4
510XL
SensoLITE
™
Light Detector
Promotes workplace safety – can help prevent accidental eye exposure to hazardous laser radiation when used as directed
Optical Specifications
Center Wavelength
Detector
Optical Interface
630nm to 1600nm
PIN-type germanium
Direct connection to bare or connectorized fibers; No specialized adapters required
Sensitivity
630nm
850nm
1300nm
1550nm
Output Indicators
Light > -40dBm
Battery test
Power Requirements
< -40dBm
< -55dBm
< -55dBm
< -55dBm
Amber LED/audible signal
Green LED
Two AA size 1.5V batteries
(approx. 100 hours continuous operation)
• Detects visible and invisible light wavelengths (630nm to 1600nm)
• Saves time and eliminates guesswork
• Simple, durable, and easy to use
• Works with bare and connectorized fibers
• Accepts all fiber and most connector types
• Wide sensitivity range: from -55dBm to +25dBm
• Presence of light indicated by an audible signal and
an illuminated front panel LED
• Unique design permits testing in bright ambient light conditions
• Long battery life—up to one year of normal use
• Low battery indicator
• Replaceable light blocking curtain
Environmental Specifications
Operating Temperature
Storage Temperature
Humidity
Dimensions
Weight
-15º C to +55º C
-25º C to +70º C
0 to 90% RH, non-condensing
14.2 x 4.3 x 3.3 cm (5.6 x 1.7 x 1.3 in.)
120g (4.2 oz.) with batteries
Snap On Connector (SOC) for Fiber Optic Power Meter
Snap On Connectors (SOC) are used on the 560XL Fiber Optic
Power Meter. The Snap On Connectors configure the optical power meter for various optical connectors. Contact Greenlee for other available adapters.
FC ST SC
Universal Connector Interface (UCI) for 577XL family
User will need to purchase a Universal Connector Interface (UCI) adapter for use of the instrument. Please specify the desired connector adapter type when ordering. Contact Greenlee for other available adapters.
FC SC ST
T1020 T1030 1062 APC-108 ASC-108 AST-108
946 Adapter Cleaning Wands
Adapter wands are a convenient, economical and disposable way to clean and maintain fiber optic interfaces and bulkhead adapters. Incorporating the same lint-free material as the all-in-one
Connector Reel Cleaner, cleaning wands are effective in removing contaminants from hard-to-reach connector end face ferrule alignment sleeves. Ten cleaning wands come in each package.
Ordering Information
Cat No. UPC
5890-FC
5890-SC
5890-ST
APC-108
AST-108
ASC-108
1062
T1020
T1030
948
946
577XL M90
580XL-FC
580XL-SC
580XL-ST
5670-FC
5670-SC
5670-ST
5680-FC
5680-SC
5680-ST
170XL
510XL
560XL
567XL
568XL
570XL-FC
570XL-SC
570XL-ST
573XL
84486
84487
84488
00023
577XL AS100 00029
84501
00024
84485
00025
00026
84493
84494
84495
84496
84497
00027
84489
84490
84491
84492
84498
84499
84500
60572
60573
60574
60575
60576
60577
60692
60571
Description
VISUAL FAULT FInDeR
SensoLITe™ LIGhT DeTeCTOR
FIBeR OPTIC POweR MeTeR
FIBeR OPTIC POweR MeTeR SI, (SOC)
FIBeR OPTIC POweR MeTeR, SOC-hP InGAAS
850/1300nM LeD SOURCe w/FC InTeRFACe
850/1300nM LeD SOURCe w/SC InTeRFACe
850/1300nM LeD SOURCe w/ST InTeRFACe
650nM LeD SOURCe w/ST InTeRFACe
850nM LeD SOURCe wITh AS100 LAUnCh
850nM LeD SOURCe wITh M90 LAUnCh
1310/1550nM LASeR SOURCe w/FC InTeRFACe
1310/1550nM LASeR SOURCe w/SC InTeRFACe
1310/1550nM LASeR SOURCe w/ST InTeRFACe
MULTIMODe FIBeR OPTIC TeST SeT w/FC InTeRFACe
MULTIMODe FIBeR OPTIC TeST SeT w/SC InTeRFACe
MULTIMODe FIBeR OPTIC TeST SeT w/ST InTeRFACe
SInGLeMODe FIBeR OPTIC TeST SeT w/FC InTeRFACe
SInGLeMODe FIBeR OPTIC TeST SeT w/SC InTeRFACe
SInGLeMODe FIBeR OPTIC TeST SeT w/ST InTeRFACe
MULTIMODe AnD SInGLeMODe FIBeR OPTIC TeST SeT w/FC InTeRFACe
MULTIMODe AnD SInGLeMODe FIBeR OPTIC TeST SeT w/SC InTeRFACe
MULTIMODe AnD SInGLeMODe FIBeR OPTIC TeST SeT w/ST InTeRFACe
FC/PC UCI ADAPTeR
ST/PC UCI ADAPTeR
SC/PC UCI ADAPTeR
SC/PC SOC ADAPTeR
FC/PC SOC ADAPTeR
ST/PC SOC ADAPTeR
COnneCTOR ReeL CLeAneR CLeAnInG SySTeM
2.5 MM CLeAnInG wAnDS
= Replacement paRt = accessoRy
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
1
1
1
1
1
www.greenlee.com
MA-5636 5/11
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070
©2011 Greenlee Textron Inc. • An ISO 9001 Company • Printed in USA
Greenlee Textron Inc. is a subsidiary of Textron Inc.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project