P3AM-4852-10ENZ0
ETERNUS DX80 S2/DX90 S2 Disk storage system
Product List
1. ETERNUS DX80 S2/DX90 S2
1.1 For Regions other than EMEA&I and China
Product name
Product ID
EOL
Component items
•
•
•
ETERNUS DX80 S2
(2.5inch, dual-controller type)
ET082DCU
Currently
Available
ET082DDU
Currently
Available
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (2GB) x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
ET082SCU
Currently
Available
Number of host interfaces that can be added: 2
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
Rack mount kit x 1
•
•
•
•
•
•
•
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (2GB) x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
•
•
ETERNUS DX80 S2
(2.5inch, single-controller type)
Rack mount kit x 1
•
•
•
•
•
•
•
•
•
ETERNUS DX80 S2
(3.5inch, dual-controller type)
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (2GB) x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
•
•
•
•
•
•
•
Number of host interfaces that can be added: 2
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
Rack mount kit x 1
Number of host interfaces that must be ordered: 1
Number of host interfaces that can be added: 1
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
Product name
Product ID
EOL
Component items
•
•
•
ETERNUS DX80 S2
(3.5inch, single-controller type)
ET082SDU
Currently
Available
ET092DCU
Currently
Available
Number of host interfaces that must be ordered: 1
•
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (4GB) x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
ET092DDU
Currently
Available
ET092SCU
Currently
Available
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
Rack mount kit x 1
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (4GB) x 2
- Power supply unit x 2
Number of host interfaces that can be added: 2
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 240 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
Rack mount kit x 1
•
•
•
•
•
•
•
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (4GB) x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
•
•
ETERNUS DX90 S2
(2.5inch, single-controller type)
Number of host interfaces that can be added: 1
•
•
•
•
•
•
•
•
•
ETERNUS DX90 S2
(3.5inch, dual-controller type)
Rack mount kit x 1
•
•
•
•
•
•
•
•
•
ETERNUS DX90 S2
(2.5inch, dual-controller type)
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (2GB) x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
•
•
•
•
•
•
•
Number of host interfaces that can be added: 2
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 228 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
Rack mount kit x 1
Number of host interfaces that must be ordered: 1
Number of host interfaces that can be added: 1
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 240 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
Product name
Product ID
EOL
Component items
•
•
•
ETERNUS DX90 S2
(3.5inch, single-controller type)
ET092SDU
Currently
Available
•
•
•
•
•
•
•
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (4GB) x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
Rack mount kit x 1
Number of host interfaces that must be ordered: 1
Number of host interfaces that can be added: 1
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 228 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
1.2 For China Region
Product name
Product ID
EOL
Component items
•
•
•
ETERNUS DX80 S2
(2.5inch, dual-controller type)
ET082DCCU
Currently
Available
ET082DDCU
Currently
Available
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (2GB) x 2
- Power supply unit x 2
ET082SCCU
Currently
Available
ET082SDCU
Currently
Available
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
Rack mount kit x 1
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (2GB) x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
Number of host interfaces that can be added: 2
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
Rack mount kit x 1
•
•
•
•
•
•
•
Number of host interfaces that must be ordered: 1
•
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (2GB) x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
•
•
ETERNUS DX80 S2
(3.5inch, single-controller type)
Number of host interfaces that can be added: 2
•
•
•
•
•
•
•
•
•
ETERNUS DX80 S2
(2.5inch, single-controller type)
Rack mount kit x 1
•
•
•
•
•
•
•
•
•
ETERNUS DX80 S2
(3.5inch, dual-controller type)
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (2GB) x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
•
•
•
•
•
•
•
Number of host interfaces that can be added: 1
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
Rack mount kit x 1
Number of host interfaces that must be ordered: 1
Number of host interfaces that can be added: 1
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
Product name
Product ID
EOL
Component items
•
•
•
ETERNUS DX90 S2
(2.5inch, dual-controller type)
ET092DCCU
Currently
Available
ET092DDCU
Currently
Available
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (4GB) x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
ET092SCCU
Currently
Available
ET092SDCU
Currently
Available
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 240 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
Rack mount kit x 1
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (4GB) x 1
- Power supply unit x 2
Number of host interfaces that can be added: 2
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 228 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
Rack mount kit x 1
•
•
•
•
•
•
•
Number of host interfaces that must be ordered: 1
•
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (4GB) x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
•
•
ETERNUS DX90 S2
(3.5inch, single-controller type)
Number of host interfaces that can be added: 2
•
•
•
•
•
•
•
•
•
ETERNUS DX90 S2
(2.5inch, single-controller type)
Rack mount kit x 1
•
•
•
•
•
•
•
•
•
ETERNUS DX90 S2
(3.5inch, dual-controller type)
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (4GB) x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔NEMA L6-15P: 4m) x 2
•
•
•
•
•
•
•
Number of host interfaces that can be added: 1
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 240 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
Rack mount kit x 1
Number of host interfaces that must be ordered: 1
Number of host interfaces that can be added: 1
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 228 (if the maximum number of drive enclosures are added)
AC cable plug shape: NEMA L6-15P
1.3 For EMEA&I Region
Product name
Product ID
EOL
Component items
•
•
•
ETERNUS DX80 S2
(2.5inch, dual-controller type)
FTS:ET082DCU
Currently
Available
FTS:ET082DDU
Currently
Available
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (2GB) x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G: 2.5m) x 2
FTS:ET082SCU
Currently
Available
FTS:ET082SDU
Currently
Available
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: IEC60320-C14G
Rack mount kit x 1
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (2GB) x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G: 2.5m) x 2
Number of host interfaces that can be added: 2
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: IEC60320-C14G
Rack mount kit x 1
•
•
•
•
•
•
•
Number of host interfaces that must be ordered: 1
•
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (2GB) x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G: 2.5m) x 2
•
•
ETERNUS DX80 S2
(3.5inch, single-controller type)
Number of host interfaces that can be added: 2
•
•
•
•
•
•
•
•
•
ETERNUS DX80 S2
(2.5inch, single-controller type)
Rack mount kit x 1
•
•
•
•
•
•
•
•
•
ETERNUS DX80 S2
(3.5inch, dual-controller type)
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (2GB) x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G: 2.5m) x 2
•
•
•
•
•
•
•
Number of host interfaces that can be added: 1
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: IEC60320-C14G
Rack mount kit x 1
Number of host interfaces that must be ordered: 1
Number of host interfaces that can be added: 1
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9 (the maximum number of drives cannot be exceeded)
Number of drives that can be installed: 120 (if the maximum number of drive enclosures are added)
AC cable plug shape: IEC60320-C14G
Product name
Product ID
EOL
Component items
•
•
•
ETERNUS DX90 S2
(2.5inch, dual-controller type)
FTS:ET092DCU
Currently
Available
FTS:ET092DDU
Currently
Available
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (4GB) x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G: 2.5m) x 2
FTS:ET092SCU
Currently
Available
FTS:ET092SDU
Currently
Available
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 240 (if the maximum number of drive enclosures are added)
AC cable plug shape: IEC60320-C14G
Rack mount kit x 1
Number of host interfaces that must be ordered: 2
•
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (4GB) x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G: 2.5m) x 2
Number of host interfaces that can be added: 2
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 228 (if the maximum number of drive enclosures are added)
AC cable plug shape: IEC60320-C14G
Rack mount kit x 1
•
•
•
•
•
•
•
Number of host interfaces that must be ordered: 1
•
Controller enclosure (2U) x 1
- Controller x 1
- Cache memory module (4GB) x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G: 2.5m) x 2
•
•
ETERNUS DX90 S2
(3.5inch, single-controller type)
Number of host interfaces that can be added: 2
•
•
•
•
•
•
•
•
•
ETERNUS DX90 S2
(2.5inch, single-controller type)
Rack mount kit x 1
•
•
•
•
•
•
•
•
•
ETERNUS DX90 S2
(3.5inch, dual-controller type)
Controller enclosure (2U) x 1
- Controller x 2
- Cache memory module (4GB) x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G: 2.5m) x 2
•
•
•
•
•
•
•
Number of host interfaces that can be added: 1
Minimum number of 2.5" drives that must be ordered: 2
Maximum number of 2.5" drives that can be installed: 24
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 240 (if the maximum number of drive enclosures are added)
AC cable plug shape: IEC60320-C14G
Rack mount kit x 1
Number of host interfaces that must be ordered: 1
Number of host interfaces that can be added: 1
Minimum number of 3.5" drives that must be ordered: 2
Maximum number of 3.5" drives that can be installed: 12
Number of drive enclosures that can be added: 9
Number of drives that can be installed: 228 (if the maximum number of drive enclosures are added)
AC cable plug shape: IEC60320-C14G
2. Optional Products
ETEAD1DU-L
ETEAD1DU
ETEAD2DU-L
ETEAD2DU
ETEAD1CU-L
ETEAD1CU
ETEAD2CU-L
ETEAD2CU
ET092SDU
ET092DDU
ET092SCU
ET092DCU
ET082SDU
ET082DDU
ET082SCU
Product ID
Product ID
ET082DCU
Product name
Preinstalled (**)
2.1 For Regions other than EMEA&I and China
EOL
Component items
Drive enclosure
•
ETEAD2CU
Y
Y
N
Y
N
Y
N
Y
N
–
–
–
–
–
–
–
•
–
Drive enclosure
for DX80 S2/DX90 S2
(2.5inch, dual-IOM
type)
Currently
Available
ETEAD2CU-L
N
Y
N
Y
N
Y
N
Y
N
–
–
–
–
–
–
–
•
•
•
–
•
•
ETEAD2DU
Y
Y
N
Y
N
Y
N
Y
N
–
–
–
–
–
–
–
•
–
Drive enclosure
for DX80 S2/DX90 S2
(3.5inch, dual-IOM
type)
Currently
Available
ETEAD2DU-L
N
Y
N
Y
N
Y
N
Y
N
–
–
–
–
–
–
–
•
•
•
–
•
•
ETEAD1CU
Y
N
Y
N
Y
N
Y
N
Y
–
–
–
–
–
–
–
•
–
Drive enclosure
for DX80 S2/DX90 S2
(2.5inch, single-IOM
type)
Currently
Available
ETEAD1CU-L
N
N
Y
N
Y
N
Y
N
Y
–
–
–
–
–
–
–
•
•
•
–
•
•
ETEAD1DU
Y
N
Y
N
Y
N
Y
N
Y
–
–
–
–
–
–
–
•
–
Drive enclosure
for DX80 S2/DX90 S2
(3.5inch, single-IOM
type)
Currently
Available
ETEAD1DU-L
N
N
Y
N
Y
N
Y
N
Y
–
–
–
–
–
–
–
–
•
•
•
•
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
AC cable (AC200 - 240V,
IEC60320-C13↔NEMA L6-15P: 4m) x 2
QSFP cable (0.75m) x 2
Rack mount kit x 1
Maximum number of 2.5" drives that can be
installed: 24
AC cable plug shape: NEMA L6-15P
Drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
AC cable (AC200 - 240V,
IEC60320-C13↔NEMA L6-15P: 4m) x 2
QSFP cable (0.75m) x 2
Rack mount kit x 1
Maximum number of 3.5" drives that can be
installed: 12
AC cable plug shape: NEMA L6-15P
Drive enclosure (2U) x 1
- I/O module x 1
- Power supply unit x 2
AC cable (AC200 - 240V,
IEC60320-C13↔NEMA L6-15P: 4m) x 2
QSFP cable (0.75m) x 1
Rack mount kit x 1
Maximum number of 2.5" drives that can be
installed: 24
AC cable plug shape: NEMA L6-15P
Drive enclosure (2U) x 1
- I/O module x 1
- Power supply unit x 2
AC cable (AC200 - 240V,
IEC60320-C13↔NEMA L6-15P: 4m) x 2
QSFP cable (0.75m) x 1
Rack mount kit x 1
Maximum number of 3.5" drives that can be
installed: 12
AC cable plug shape: NEMA L6-15P
N: Not preinstalled at the factory (packaged separately)
ETEAD1DU-L
ETEAD1DU
ETEAD2DU-L
ETEAD2DU
ETEAD1CU-L
ETEAD1CU
ETEAD2CU-L
ETEAD2CU
ET092SDU
ET092DDU
ET092SCU
ET092DCU
ET082SDU
ET082DDU
ET082SCU
Preinstalled (**)
Product ID
ET082DCU
Product name
Product ID
EOL
Component items
Additional controller module
Additional controller
module for DX80 S2
ETEAC8A-L
N
N
Y
N
Y
N
N
N
N
–
–
–
–
–
–
–
–
Currently
Available
•
•
Controller x 1
•
Number of host interfaces that must be
ordered: 1
Number of host interfaces that can be added: 1
•
Additional controller
module for DX90 S2
ETEAC9A-L
N
N
N
N
N
N
Y
N
Y
–
–
–
–
–
–
–
–
Currently
Available
Cache memory module (2GB) x 1
•
•
Controller x 1
•
Number of host interfaces that must be
ordered: 1
Number of host interfaces that can be added: 1
•
Cache memory module (4GB) x 1
Additional IOM
Additional IOM
for DX80 S2/DX90 S2
ETEAMA-L
N
–
–
–
–
–
–
–
–
N
N
Y
Y
N
N
Y
Y
ETEHH12
Y
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
Currently
Available
•
•
I/O module x 1
•
•
Host interface adapter (FC, 2ports) x 1
QSFP cable (0.75m) x 1
Host interface
Host interface
for DX80 S2/DX90 S2
(16Gbit/s, FC, 2port)
ETEHH12-L
N
Host interface
for DX80 S2/DX90 S2
(8Gbit/s, FC, 2port)
ETEHF12
Y
Y
Y
Y
Y
Y
Y
Y
ETEHF12-L
N
Y
Y
Y
Y
Y
Y
Y
Host interface
for DX80 S2/DX90 S2
(10Gbit/s, iSCSI, 2port,
for optical cable)
ETEHX12
Y
Y
Y
Y
Y
Y
Y
Y
Y
ETEHX12-L
N
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
Host interface
for DX80 S2/DX90 S2
(10Gbit/s, iSCSI, 2port,
for optical cable)
ETEHY12
Y
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
*1
*1
*1
*1
–
–
–
–
–
–
–
Y
–
–
–
–
–
–
–
–
Y
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
N
ETEHY1N
Y
ETEHY1N-L
N
ETEHL12
Y
ETEHL12-L
N
Host interface
for DX80 S2/DX90 S2
(SAS, 2port)
ETEHS12
Y
Y
Y
Y
Y
Y
Y
Y
ETEHS12-L
N
Y
Y
Y
Y
Y
Y
Y
Host interface
for DX80 S2/DX90 S2
(FCoE, 2port,
for optical cable)
ETEHC12
Y
Y
Y
Y
Y
Y
Y
Y
ETEHC12-L
N
Y
Y
Y
Y
Y
Y
Host interface
for DX80 S2/DX90 S2
(FCoE, 2port, without
SFP+, for copper cable)
ETEHC1N
Y
Y
Y
Y
Y
Y
Y
ETEHC1N-L
N
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
Y
Y
Y
Y
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
*1:
Y
Y
Y
Host interface adapter (FC, 2ports) x 1
•
•
Host interface adapter (iSCSI 10G, 2ports) x 1
2012/02
•
•
Host interface adapter (iSCSI 10G, 2ports) x 1
Currently
Available
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
*1
*1
*1
*1
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
*1:
–
–
–
–
–
–
–
–
*1:
•
Host interface
for DX80 S2/DX90 S2
(1Gbit/s, iSCSI, 2port)
Currently
Available
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
–
–
–
–
–
–
–
–
Y
–
–
–
–
–
–
–
–
Y
–
–
–
–
–
–
–
–
Y
–
–
–
–
–
–
–
–
Y
Y
–
–
–
–
–
–
–
–
Y
Y
–
–
–
–
–
–
–
–
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
*1
*1
*1
*1
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
–
–
–
–
–
–
–
–
Firmware version V10L40 or later is
required for an ETERNUS DX Disk storage
system.
•
•
•
Y
SFP+ (16Gbit/s) x 2
Currently
Available
Currently
Available
ETEHY12-L
Host interface
for DX80 S2/DX90 S2
(10Gbit/s, iSCSI, 2port,
without SFP+,
for copper cable)
–
Currently
Available
Currently
Available
Currently
Available
Currently
Available
*1:
SFP+ (8Gbit/s) x 2
SFP+ (10Gbit/s) x 2
SFP+ (10Gbit/s) x 2
Firmware version V10L20 or later is
required for an ETERNUS DX Disk storage
system when performing REC.
Host interface adapter (iSCSI 10G, 2ports) x 1
Firmware version V10L30 or later is
required for an ETERNUS DX Disk storage
system.
Host interface adapter (iSCSI 1G, 2ports) x 1
Firmware version V10L16 or later is
required for an ETERNUS DX Disk storage
system when performing REC.
•
Host interface adapter (SAS, 2ports) x 1
•
•
Host interface adapter (FCoE, 2ports) x 1
•
Host interface adapter (FCoE, 2ports) x 1
*1:
SFP+ (10Gbit/s) x 2
Firmware version V10L30 or later is required
for an ETERNUS DX Disk storage system.
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082DCU
ET082SCU
ET082DDU
ET082SDU
ET092DCU
ET092SCU
ET092DDU
ET092SDU
ETEAD2CU
ETEAD2CU-L
ETEAD1CU
ETEAD1CU-L
ETEAD2DU
ETEAD2DU-L
ETEAD1DU
ETEAD1DU-L
Product ID
Disk Drive(2.5inch)
300GB 15krpm x1
for DX80 S2/DX90 S2
ETED3HG
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
ETED3HG-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
Disk Drive(2.5inch)
300GB 10krpm x1
for DX80 S2/DX90 S2
ETED3HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
ETED3HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
•
Hot spare
• 2.5" SAS disk drive (450GB/10krpm) x 1
Product name
Product ID
EOL
Component items
Drive
Disk Drive(2.5inch)
450GB 10krpm x1
for DX80 S2/DX90 S2
Disk Drive(2.5inch)
600GB 10krpm x1
for DX80 S2/DX90 S2
Disk Drive(2.5inch)
900GB 10krpm x1
for DX80 S2/DX90 S2
Self Encrypting Disk
Drive(2.5inch) 300GB
10krpm x1
for DX80 S2/DX90 S2
Self Encrypting Disk
Drive(2.5inch) 450GB
10krpm x1
for DX80 S2/DX90 S2
Self Encrypting Disk
Drive(2.5inch) 600GB
10krpm x1
for DX80 S2/DX90 S2
Self Encrypting Disk
Drive(2.5inch) 900GB
10krpm x1
for DX80 S2/DX90 S2
Disk Drive(2.5inch) 1TB
7.2krpm x1
for DX80 S2/DX90 S2
SSD(2.5inch)
100GB x1
for DX80 S2/DX90 S2
Currently
Available
Currently
Available
Hot spare
• 2.5" SAS disk drive (300GB/15krpm) x 1
•
2.5" SAS disk drive (300GB/15krpm) x 1
Hot spare
• 2.5" SAS disk drive (300GB/10krpm) x 1
2.5" SAS disk drive (300GB/10krpm) x 1
ETED4HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
ETED4HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
•
Hot spare
• 2.5" SAS disk drive (600GB/10krpm) x 1
Currently
Available
2.5" SAS disk drive (450GB/10krpm) x 1
ETED6HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
ETED6HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
•
Hot spare
• 2.5" SAS disk drive (900GB/10krpm) x 1
Currently
Available
2.5" SAS disk drive (600GB/10krpm) x 1
ETED9HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
ETED9HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
•
ETED3HE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Hot spare
• 2.5" SAS disk drive (300GB/10krpm) x 1
Currently
Available
Currently
Available
ETED3HE-L
N
ETED4HE
Y
Y
N
*1
*1
Y
Y
Y
N
ETED4HE-L
N
Y
Y
N
*1
*1
ETED6HE
Y
Y
Y
N
ETED6HE-L
N
Y
Y
N
*1
*1
ETED9HE
Y
Y
Y
N
Y
Y
N
*1
*1
N
Y
Y
N
N
Y
Y
N
*1
*1
N
Y
Y
N
N
Y
Y
N
*1
*1
Y
Y
N
Y
Y
Y
Y
*1
*1
*1
*1
N
Y
N
Y
N
Y
Y
*1
N
N
N
N
N
N
N
N
N
N
Y
Y
N
N
N
N
*1
*1
*1
*1:
Y
N
Y
N
N
N
N
N
Hot spare
• 2.5" SAS disk drive (600GB/10krpm) x 1
Y
Y
Y
Y
N
N
N
N
*1
*1
*1
*1
*1:
Y
N
Y
N
N
N
N
N
Hot spare
• 2.5" SAS disk drive (900GB/10krpm) x 1
*1:
N
N
Currently
Available
ETED9HE-L
N
ETEN1HC
ETEN1HC-L
ETES1HC
Y
Y
*1
*1
Y
Y
Y
N
N
Y
Y
N
Y
Y
Y
N
N
N
Y
Y
*1
*1
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
Y
Y
Y
Y
*1
*1
*1
*1
N
Y
N
Y
N
Y
Y
Y
N
Y
N
Y
N
Y
Y
N
N
Y
Y
N
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
N
Y
Y
Y
•
2.5" SAS disk drive (450GB/10krpm) x 1
•
2.5" SAS disk drive (450GB/10krpm) x 1
•
•
Firmware version V10L20 or later is
required for an ETERNUS DX Disk storage
system.
2.5" SAS disk drive (600GB/10krpm) x 1
Firmware version V10L20 or later is
required for an ETERNUS DX Disk storage
system.
2.5" SAS disk drive (900GB/10krpm) x 1
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
•
N
Hot spare
• 2.5" SSD (100GB) x 1
N
N
N
N
*1:
Currently
Available
Currently
Available
ETES1HC-L
Firmware version V10L20 or later is
required for an ETERNUS DX Disk storage
system.
Hot spare
Currently
Available
N
2.5" SAS disk drive (300GB/10krpm) x 1
N
Currently
Available
N
•
2.5" SAS disk drive (900GB/10krpm) x 1
Y
N
N
N
N
Firmware version V10L20 or later is
required for an ETERNUS DX Disk storage
system.
Hot spare
• 2.5" Nearline SAS disk drive (1TB/7.2krpm) x 1
2.5" Nearline SAS disk drive (1TB/7.2krpm) x 1
•
SLC type
•
•
2.5" SSD (100GB) x 1
SLC type
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082SCU
ET082DDU
ET082SDU
ET092DCU
ET092SCU
ET092DDU
ET092SDU
ETEAD2CU
ETEAD2CU-L
ETEAD1CU
ETEAD1CU-L
ETEAD2DU
ETEAD2DU-L
ETEAD1DU
ETEAD1DU-L
Product ID
ET082DCU
Product name
Product ID
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
EOL
Component items
Hot spare
SSD(2.5inch)
200GB x1
for DX80 S2/DX90 S2
ETES2HC
Currently
Available
ETES2HC-L
SSD(2.5inch)
400GB x1
for DX80 S2/DX90 S2
ETES4HC
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
N
Y
Y
Y
N
N
N
N
N
N
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
2.5" SSD (200GB) x 1
•
•
2.5" SSD (200GB) x 1
SLC type
SLC type
Hot spare
• 2.5" SSD (400GB) x 1
N
Currently
Available
ETES4HC-L
•
•
N
•
SLC type
•
•
2.5" SSD (400GB) x 1
SLC type
Hot spare
SSD(2.5inch)
800GB x1
for DX80 S2/DX90 S2
Disk Drive(3.5inch)
300GB 15krpm x1
for DX80 S2/DX90 S2
Disk Drive(3.5inch)
450GB 15krpm x1
for DX80 S2/DX90 S2
Disk Drive(3.5inch)
600GB 15krpm x1
for DX80 S2/DX90 S2
ETES8HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
•
•
2.5" SSD (800GB) x 1
•
•
2.5" SSD (800GB) x 1
MLC type
ETES8HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
ETED3HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETED3HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
•
Hot spare
• 3.5" SAS disk drive (450GB/15krpm) x 1
Currently
Available
MLC type
Hot spare
• 3.5" SAS disk drive (300GB/15krpm) x 1
3.5" SAS disk drive (300GB/15krpm) x 1
ETED4HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETED4HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
•
Hot spare
• 3.5" SAS disk drive (600GB/15krpm) x 1
Currently
Available
3.5" SAS disk drive (450GB/15krpm) x 1
ETED6HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETED6HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
•
Hot spare
• 3.5" Nearline SAS disk drive (1TB/7.2krpm) x 1
Currently
Available
3.5" SAS disk drive (600GB/15krpm) x 1
Disk Drive(3.5inch) 1TB
7.2krpm x1
for DX80 S2/DX90 S2
ETEN1HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETEN1HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
Disk Drive(3.5inch) 2TB
7.2krpm x1
for DX80 S2/DX90 S2
ETEN2HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETEN2HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
•
Hot spare
• 3.5" Nearline SAS disk drive (3TB/7.2krpm) x 1
Disk Drive(3.5inch) 3TB
7.2krpm x1
for DX80 S2/DX90 S2
SSD(3.5inch)
100GB x1
for DX80 S2/DX90 S2
SSD(3.5inch)
400GB x1
for DX80 S2/DX90 S2
Currently
Available
•
3.5" Nearline SAS disk drive (1TB/7.2krpm) x 1
Hot spare
• 3.5" Nearline SAS disk drive (2TB/7.2krpm) x 1
3.5" Nearline SAS disk drive (2TB/7.2krpm) x 1
ETEN3HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETEN3HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
•
N
Hot spare
• 3.5" SSD (100GB) x 1
ETES1HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
Currently
Available
Currently
Available
ETES1HD-L
SSD(3.5inch)
200GB x1
for DX80 S2/DX90 S2
Currently
Available
ETES2HD
N
Y
N
N
N
N
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
N
N
N
N
N
N
N
N
Y
Y
Y
N
Y
Y
Y
Currently
Available
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
ETES4HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
N
N
N
Y
Y
N
N
Y
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Y
N
N
N
N
Y
Y
Y
Y
SLC type
•
•
3.5" SSD (100GB) x 1
SLC type
•
SLC type
•
•
3.5" SSD (200GB) x 1
SLC type
Hot spare
• 3.5" SSD (400GB) x 1
Currently
Available
ETES4HD-L
•
Hot spare
• 3.5" SSD (200GB) x 1
N
ETES2HD-L
3.5" Nearline SAS disk drive (3TB/7.2krpm) x 1
•
SLC type
•
•
3.5" SSD (400GB) x 1
SLC type
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082SCU
ET082DDU
ET082SDU
ET092DCU
ET092SCU
ET092DDU
ET092SDU
ETEAD2CU
ETEAD2CU-L
ETEAD1CU
ETEAD1CU-L
ETEAD2DU
ETEAD2DU-L
ETEAD1DU
ETEAD1DU-L
Product ID
ET082DCU
Product name
Product ID
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
EOL
Component items
Hot spare
SSD(3.5inch)
800GB x1
for DX80 S2/DX90 S2
ETES8HD
Currently
Available
ETES8HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
Disk Drive(2.5inch)
300GB 15krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETED3MG
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
300GB 10krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETED3MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
450GB 10krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETED4MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
600GB 10krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETED6MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
900GB 10krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETED9MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 300GB
10krpm x2 (RAID1)
for DX80 S2/DX90 S2
ETED3ME
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 450GB
10krpm x2 (RAID1)
for DX80 S2/DX90 S2
ETED4ME
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 600GB
10krpm x2 (RAID1)
for DX80 S2/DX90 S2
ETED6ME
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 900GB
10krpm x2 (RAID1)
for DX80 S2/DX90 S2
ETED9ME
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch) 1TB
7.2krpm x2 (RAID1)
for DX80 S2/DX90 S2
ETEN1MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
SSD(2.5inch) 100GB x2
(RAID1)
for DX80 S2/DX90 S2
ETES1MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
SSD(2.5inch) 200GB x2
(RAID1)
for DX80 S2/DX90 S2
SSD(2.5inch) 400GB x2
(RAID1)
for DX80 S2/DX90 S2
SSD(2.5inch) 800GB x2
(RAID1)
for DX80 S2/DX90 S2
ETES2MC
ETES4MC
ETES8MC
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Currently
Available
Currently
Available
Currently
Available
Disk Drive(3.5inch)
300GB 15krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETED3MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
450GB 15krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETED4MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
•
•
3.5" SSD (800GB) x 1
•
•
3.5" SSD (800GB) x 1
MLC type
MLC type
RAID1(1D+1M)
• 2.5" SAS disk drive (300GB/15krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (300GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (450GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (600GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (900GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (300GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (450GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (600GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (900GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" Nearline SAS disk drive (1TB/7.2krpm) x 2
RAID1(1D+1M)
• 2.5" SSD (100GB) x 2
•
SLC type
RAID1(1D+1M)
• 2.5" SSD (200GB) x 2
•
SLC type
RAID1(1D+1M)
• 2.5" SSD (400GB) x 2
•
SLC type
RAID1(1D+1M)
• 2.5" SSD (800GB) x 2
•
MLC type
RAID1(1D+1M)
• 3.5" SAS disk drive (300GB/15krpm) x 2
RAID1(1D+1M)
• 3.5" SAS disk drive (450GB/15krpm) x 2
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082DCU
ET082SCU
ET082DDU
ET082SDU
ET092DCU
ET092SCU
ET092DDU
ET092SDU
ETEAD2CU
ETEAD2CU-L
ETEAD1CU
ETEAD1CU-L
ETEAD2DU
ETEAD2DU-L
ETEAD1DU
ETEAD1DU-L
Product ID
Disk Drive(3.5inch)
600GB 15krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETED6MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch) 1TB
7.2krpm x2 (RAID1)
for DX80 S2/DX90 S2
ETEN1MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch) 2TB
7.2krpm x2 (RAID1)
for DX80 S2/DX90 S2
ETEN2MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
RAID1(1D+1M)
• 3.5" Nearline SAS disk drive (2TB/7.2krpm) x 2
Disk Drive(3.5inch) 3TB
7.2krpm x2 (RAID1)
for DX80 S2/DX90 S2
ETEN3MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
RAID1(1D+1M)
• 3.5" Nearline SAS disk drive (3TB/7.2krpm) x 2
SSD(3.5inch)
100GB x2 (RAID1)
for DX80 S2/DX90 S2
ETES1MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
SSD(3.5inch)
200GB x2 (RAID1)
for DX80 S2/DX90 S2
ETES2MD
SSD(3.5inch)
400GB x2 (RAID1)
for DX80 S2/DX90 S2
ETES4MD
SSD(3.5inch)
800GB x2 (RAID1)
for DX80 S2/DX90 S2
ETES8MD
Disk Drive(2.5inch)
300GB 15krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETED3PG
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
300GB 10krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETED3PC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
450GB 10krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETED4PC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
600GB 10krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETED6PC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
900GB 10krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETED9PC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 300GB
10krpm x6 (RAID5)
for DX80 S2/DX90 S2
ETED3PE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 450GB
10krpm x6 (RAID5)
for DX80 S2/DX90 S2
ETED4PE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 600GB
10krpm x6 (RAID5)
for DX80 S2/DX90 S2
ETED6PE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 900GB
10krpm x6 (RAID5)
for DX80 S2/DX90 S2
ETED9PE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch) 1TB
7.2krpm x6 (RAID5)
for DX80 S2/DX90 S2
ETEN1PC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Product name
Product ID
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
EOL
Currently
Available
Currently
Available
Currently
Available
Component items
RAID1(1D+1M)
•
3.5" SAS disk drive (600GB/15krpm) x 2
RAID1(1D+1M)
•
3.5" Nearline SAS disk drive (1TB/7.2krpm) x 2
RAID1(1D+1M)
• 3.5" SSD (100GB) x 2
•
SLC type
RAID1(1D+1M)
•
•
3.5" SSD (200GB) x 2
SLC type
RAID1(1D+1M)
• 3.5" SSD (400GB) x 2
•
SLC type
RAID1(1D+1M)
• 3.5" SSD (800GB) x 2
•
MLC type
RAID5(5D+1P)
• 2.5" SAS disk drive (300GB/15krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (300GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (450GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (600GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (900GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (300GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (450GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (600GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (900GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
N: Not preinstalled at the factory (packaged separately)
SSD(2.5inch) 200GB x4
(RAID5)
for DX80 S2/DX90 S2
SSD(2.5inch) 400GB x4
(RAID5)
for DX80 S2/DX90 S2
SSD(2.5inch) 800GB x4
(RAID5)
for DX80 S2/DX90 S2
ETES2PC
ETES4PC
ETES8PC
ET082SCU
ET082DDU
ET082SDU
ET092DCU
ET092SCU
ET092DDU
ET092SDU
ETEAD2CU
ETEAD2CU-L
ETEAD1CU
ETEAD1CU-L
ETEAD2DU
ETEAD2DU-L
ETEAD1DU
ETEAD1DU-L
ETES1PC
Preinstalled (**)
SSD(2.5inch) 100GB x4
(RAID5)
for DX80 S2/DX90 S2
Product ID
ET082DCU
Product name
Product ID
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
EOL
Currently
Available
Currently
Available
Currently
Available
Currently
Available
Component items
RAID5(3D+1P)
•
•
2.5" SSD (100GB) x 4
SLC type
RAID5(3D+1P)
• 2.5" SSD (200GB) x 4
•
SLC type
RAID5(3D+1P)
• 2.5" SSD (400GB) x 4
•
SLC type
RAID5(3D+1P)
• 2.5" SSD (800GB) x 4
•
MLC type
Disk Drive(3.5inch)
300GB 15krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETED3PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
450GB 15krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETED4PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
600GB 15krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETED6PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch) 1TB
7.2krpm x6 (RAID5)
for DX80 S2/DX90 S2
ETEN1PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch) 2TB
7.2krpm x6 (RAID5)
for DX80 S2/DX90 S2
ETEN2PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
RAID5(5D+1P)
• 3.5" Nearline SAS disk drive (2TB/7.2krpm) x 6
Disk Drive(3.5inch) 3TB
7.2krpm x6 (RAID5)
for DX80 S2/DX90 S2
ETEN3PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
RAID5(5D+1P)
• 3.5" Nearline SAS disk drive (3TB/7.2krpm) x 6
SSD(3.5inch) 100GB x4
(RAID5)
for DX80 S2/DX90 S2
ETES1PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
SSD(3.5inch) 200GB x4
(RAID5)
for DX80 S2/DX90 S2
SSD(3.5inch) 400GB x4
(RAID5)
for DX80 S2/DX90 S2
SSD(3.5inch) 800GB x4
(RAID5)
for DX80 S2/DX90 S2
ETES2PD
ETES4PD
ETES8PD
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Currently
Available
Currently
Available
Currently
Available
Disk Drive(2.5inch)
300GB 15krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETED3DG
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
300GB 10krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETED3DC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
450GB 10krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETED4DC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
600GB 10krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETED6DC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
RAID5(5D+1P)
• 3.5" SAS disk drive (300GB/15krpm) x 6
RAID5(5D+1P)
• 3.5" SAS disk drive (450GB/15krpm) x 6
RAID5(5D+1P)
• 3.5" SAS disk drive (600GB/10krpm) x 6
RAID5(5D+1P)
•
3.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
RAID5(3D+1P)
•
•
3.5" SSD (100GB) x 4
SLC type
RAID5(3D+1P)
• 3.5" SSD (200GB) x 4
•
SLC type
RAID5(3D+1P)
•
•
3.5" SSD (400GB) x 4
SLC type
RAID5(3D+1P)
• 3.5" SSD (800GB) x 4
•
MLC type
RAID6(4D+2P)
• 2.5" SAS disk drive (300GB/15krpm) x 6
RAID6(4D+2P)
• 2.5" SAS disk drive (300GB/10krpm) x 6
RAID6(4D+2P)
• 2.5" SAS disk drive (450GB/10krpm) x 6
RAID6(4D+2P)
• 2.5" SAS disk drive (600GB/10krpm) x 6
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082DCU
ET082SCU
ET082DDU
ET082SDU
ET092DCU
ET092SCU
ET092DDU
ET092SDU
ETEAD2CU
ETEAD2CU-L
ETEAD1CU
ETEAD1CU-L
ETEAD2DU
ETEAD2DU-L
ETEAD1DU
ETEAD1DU-L
Product ID
Disk Drive(2.5inch)
900GB 10krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETED9DC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 300GB
10krpm x6 (RAID6)
for DX80 S2/DX90 S2
ETED3DE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 450GB
10krpm x6 (RAID6)
for DX80 S2/DX90 S2
ETED4DE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 600GB
10krpm x6 (RAID6)
for DX80 S2/DX90 S2
ETED6DE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 900GB
10krpm x6 (RAID6)
for DX80 S2/DX90 S2
ETED9DE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch) 1TB
7.2krpm x6 (RAID6)
for DX80 S2/DX90 S2
ETEN1DC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(3.5inch)
300GB 15krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETED3DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
450GB 15krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETED4DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
600GB 15krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETED6DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch) 1TB
7.2krpm x6 (RAID6)
for DX80 S2/DX90 S2
ETEN1DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch) 2TB
7.2krpm x6 (RAID6)
for DX80 S2/DX90 S2
ETEN2DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
RAID6(4D+2P)
• 3.5" Nearline SAS disk drive (2TB/7.2krpm) x 6
Disk Drive(3.5inch) 3TB
7.2krpm x6 (RAID6)
for DX80 S2/DX90 S2
ETEN3DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
RAID6(4D+2P)
• 3.5" Nearline SAS disk drive (3TB/7.2krpm) x 6
Disk Drive(2.5inch)
300GB 15krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETED3SG
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
300GB 10krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETED3SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
450GB 10krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETED4SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
600GB 10krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETED6SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
900GB 10krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETED9SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 300GB
10krpm x6 (RAID1+0)
for DX80 S2/DX90 S2
ETED3SE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Product name
Product ID
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
EOL
Component items
RAID6(4D+2P)
•
2.5" SAS disk drive (900GB/10krpm) x 6
RAID6(4D+2P)
• 2.5" SAS disk drive (300GB/10krpm) x 6
RAID6(4D+2P)
• 2.5" SAS disk drive (450GB/10krpm) x 6
RAID6(4D+2P)
• 2.5" SAS disk drive (600GB/10krpm) x 6
RAID6(4D+2P)
• 2.5" SAS disk drive (900GB/10krpm) x 6
RAID6(4D+2P)
• 2.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
RAID6(4D+2P)
• 3.5" SAS disk drive (300GB/15krpm) x 6
RAID6(4D+2P)
• 3.5" SAS disk drive (450GB/15krpm) x 6
RAID6(4D+2P)
• 3.5" SAS disk drive (600GB/15krpm) x 6
RAID6(4D+2P)
•
3.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (300GB/15krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (300GB/10krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (450GB/10krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (600GB/10krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (900GB/10krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (300GB/10krpm) x 6
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082DCU
ET082SCU
ET082DDU
ET082SDU
ET092DCU
ET092SCU
ET092DDU
ET092SDU
ETEAD2CU
ETEAD2CU-L
ETEAD1CU
ETEAD1CU-L
ETEAD2DU
ETEAD2DU-L
ETEAD1DU
ETEAD1DU-L
Product ID
Self Encrypting Disk
Drive(2.5inch) 450GB
10krpm x6 (RAID1+0)
for DX80 S2/DX90 S2
ETED4SE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 600GB
10krpm x6 (RAID1+0)
for DX80 S2/DX90 S2
ETED6SE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Self Encrypting Disk
Drive(2.5inch) 900GB
10krpm x6 (RAID1+0)
for DX80 S2/DX90 S2
ETED9SE
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch) 1TB
7.2krpm x6 (RAID1+0)
for DX80 S2/DX90 S2
ETEN1SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
SSD(2.5inch) 100GB x6
(RAID1+0)
for DX80 S2/DX90 S2
ETES1SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Product name
SSD(2.5inch) 200GB x6
(RAID1+0)
for DX80 S2/DX90 S2
SSD(2.5inch) 400GB x6
(RAID1+0)
for DX80 S2/DX90 S2
SSD(2.5inch) 800GB x6
(RAID1+0)
for DX80 S2/DX90 S2
Product ID
ETES2SC
ETES4SC
ETES8SC
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
EOL
Currently
Available
Currently
Available
Currently
Available
Component items
RAID1+0(3D+3M)
•
2.5" SAS disk drive (450GB/10krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (600GB/10krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (900GB/10krpm) x 6
RAID1+0(3D+3M)
• 2.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
RAID1+0(3D+3M)
•
•
2.5" SSD (100GB) x 6
SLC type
RAID1+0(3D+3M)
• 2.5" SSD (200GB) x 6
•
SLC type
RAID1+0(3D+3M)
• 2.5" SSD (400GB) x 6
•
SLC type
RAID1+0(3D+3M)
•
•
2.5" SSD (800GB) x 6
MLC type
Disk Drive(3.5inch)
300GB 15krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETED3SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
450GB 15krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETED4SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
600GB 15krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETED6SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch) 1TB
7.2krpm x6 (RAID1+0)
for DX80 S2/DX90 S2
ETEN1SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
RAID1+0(3D+3M)
• 3.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
Disk Drive(3.5inch) 2TB
7.2krpm x6 (RAID1+0)
for DX80 S2/DX90 S2
ETEN2SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
RAID1+0(3D+3M)
• 3.5" Nearline SAS disk drive (2TB/7.2krpm) x 6
Disk Drive(3.5inch) 3TB
7.2krpm x6 (RAID1+0)
for DX80 S2/DX90 S2
ETEN3SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
RAID1+0(3D+3M)
• 3.5" Nearline SAS disk drive (3TB/7.2krpm) x 6
SSD(3.5inch)
100GB x6 (RAID1+0)
for DX80 S2/DX90 S2
ETES1SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
SSD(3.5inch)
200GB x6 (RAID1+0)
for DX80 S2/DX90 S2
SSD(3.5inch)
400GB x6 (RAID1+0)
for DX80 S2/DX90 S2
SSD(3.5inch)
800GB x6 (RAID1+0)
for DX80 S2/DX90 S2
ETES2SD
ETES4SD
ETES8SD
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Currently
Available
Currently
Available
Currently
Available
RAID1+0(3D+3M)
• 3.5" SAS disk drive (300GB/15krpm) x 6
RAID1+0(3D+3M)
• 3.5" SAS disk drive (450GB/15krpm) x 6
RAID1+0(3D+3M)
• 3.5" SAS disk drive (600GB/15krpm) x 6
RAID1+0(3D+3M)
• 3.5" SSD (100GB) x 6
•
SLC type
RAID1+0(3D+3M)
• 3.5" SSD (200GB) x 6
•
SLC type
RAID1+0(3D+3M)
• 3.5" SSD (400GB) x 6
•
SLC type
RAID1+0(3D+3M)
• 3.5" SSD (800GB) x 6
•
MLC type
N: Not preinstalled at the factory (packaged separately)
ETEAD1DU-L
ETEAD1DU
ETEAD2DU-L
ETEAD2DU
ETEAD1CU-L
ETEAD1CU
ETEAD2CU-L
ETEAD2CU
ET092SDU
ET092DDU
ET092SCU
ET092DCU
ET082SDU
ET082DDU
ET082SCU
Preinstalled (**)
Product ID
ET082DCU
Product name
Product ID
EOL
Component items
Power distribution unit
Power distribution unit
for DX80 S2/DX90 S2
(AC200-240V, 1U,
Max 2 enclosures
connection)
ETEP4BU-L
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Currently
Available
•
•
Power distribution unit (1U) x 1
•
Output AC cable
(IEC60320-C13↔IEC60320-C14: 3m) x 4
•
•
•
•
Power distribution unit
for DX80 S2/DX90 S2
(AC200-240V, 2U,
Max 6 enclosures
connection)
ETEP12U-L
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Currently
Available
•
•
•
•
•
Power distribution unit
for DX80 S2/DX90 S2
(AC200-240V, 2U,
Max 8 enclosures
connection)
ETEP16U-L
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Currently
Available
•
•
Input AC cable (AC200V - 240V,
IEC60320-C13↔NEMA L6-15P: 4m) x 2
Connects to any of the 2
controller enclosure/drive enclosures
Input AC cable plug shape: NEMA L6-15P
Power distribution unit (1U) x 2
Input AC cable (AC200V - 240V,
direct connection↔NEMA L6-20P: 4m) x 2
Output AC cable
(IEC60320-C13↔IEC60320-C14: 3m) x 12
Connects to any of the 6
controller enclosure/drive enclosures
Input AC cable plug shape: NEMA L6-20P
Power distribution unit (1U) x 2
Input AC cable (AC200V - 240V,
direct connection↔NEMA L6-30P: 4m) x 2
Output AC cable
(IEC60320-C13↔IEC60320-C14: 3m) x 16
•
Connects to any of the 8
controller enclosure/drive enclosures
Input AC cable plug shape: NEMA L6-30P
•
QSFP cable (3m) x 1
•
Must be ordered when the QSFP cable
supplied with the drive enclosure (0.75m) is
too short to connect
•
QSFP cable (6m) x 1
•
Must be ordered when the QSFP cable
supplied with the drive enclosure (0.75m) is
too short to connect
•
License label x 1
Extension QSFP cable between enclosures
Extension QSFP cable
between enclosures
for DX80 S2/DX90 S2
(3m)
Extension QSFP cable
between enclosures
for DX80 S2/DX90 S2
(6m)
ETEC1Q3-L
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Currently
Available
Currently
Available
ETEC1Q6-L
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
ETEL8T
Y
Y
N
Y
N
N
N
N
N
–
–
–
–
–
–
–
–
ETEL8T-L
N
ETEL9T
Y
ETEL9T-L
N
License
Thin Provisioning
Feature License
for DX80 S2
Thin Provisioning
Feature License
for DX90 S2
Currently
Available
Y
Y
Y
*1
N
N
Y
N
N
N
N
–
–
–
–
–
–
–
–
Y
N
Y
N
–
–
–
–
–
–
–
–
N
An additional controller module for the
DX80 S2 must be ordered.
*1
N
N
•
Currently
Available
N
*1:
N
N
Y
Y
Y
*1
Y
–
–
–
–
–
–
–
*1:
–
License label x 1
An additional controller module for the
DX90 S2 must be ordered.
*1
Power cable
Power cable
(IEC60320-C13↔
IEC60320-C14)
ST-PWG13
N
Y
Y
Y
Y
Y
Y
Y
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Currently
Available
•
AC cable (AC100V - 240V,
IEC60320-C13↔IEC60320-C14: 3m) x 2
•
Must be ordered for each enclosure when
connecting a device for which the outlet type
is IEC60320-C13
N: Not preinstalled at the factory (packaged separately)
ETEAD1DU-L
ETEAD1DU
ETEAD2DU-L
ETEAD2DU
ETEAD1CU-L
ETEAD1CU
ETEAD2CU-L
ETEAD2CU
ET092SDU
ET092DDU
ET092SCU
ET092DCU
ET082SDU
ET082DDU
ET082SCU
Preinstalled (**)
Product ID
ET082DCU
Product name
Product ID
EOL
Component items
Model upgrade
Model Upgrade
for DX80S2 to DX90S2
(dual-controller type)
Model Upgrade
for DX80S2 to DX90S2
(single-controller type)
ETEU89DB-L
ETEU89SB-L
N
Y
N
*1
N
N
Y
N
N
N
N
N
–
–
–
–
–
–
–
–
*1
Y
N
*1
•
•
•
Currently
Available
*1:
Y
N
N
N
N
–
–
–
–
–
–
–
–
*1
•
•
•
Currently
Available
*1:
•
•
Model Upgrade
for DX80S2 (2.5inch,
dual-controller type)
to DX410S2
ETEU81DC-L
N
Y
N
N
N
N
N
N
N
–
–
–
–
–
–
–
–
*1
Currently
Available
•
•
Controller x 2
Cache memory module (4GB) x 2
Upgrade license x 1
Firmware version V10L20 or later is
required for an ETERNUS DX Disk storage
system.
Controller x 1
Cache memory module (4GB) x 1
Upgrade license x 1
Firmware version V10L20 or later is
required for an ETERNUS DX Disk storage
system.
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
*1:
•
•
Model Upgrade
for DX80S2 (3.5inch,
dual-controller type)
to DX410S2
ETEU81DD-L
N
N
N
Y
N
N
N
N
*1
N
–
–
–
–
–
–
–
–
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
*1:
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
N: Not preinstalled at the factory (packaged separately)
ETEAD1DU-L
ETEAD1DU
ETEAD2DU-L
ETEAD2DU
ETEAD1CU-L
ETEAD1CU
ETEAD2CU-L
ETEAD2CU
ET092SDU
ET092DDU
ET092SCU
ET092DCU
ET082SDU
ET082DDU
ET082SCU
Preinstalled (**)
Product ID
ET082DCU
Product name
Product ID
EOL
Component items
•
•
Model Upgrade
for DX80S2 (2.5inch,
single-controller type)
to DX410S2
ETEU81SC-L
N
N
Y
N
N
N
N
N
N
–
–
–
–
–
–
–
–
*1
Currently
Available
•
•
*1:
•
•
ETEU81SD-L
N
N
N
N
Y
N
N
N
N
–
–
–
–
–
–
–
–
*1
Currently
Available
•
•
Upgrade license x 1
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
•
*1:
•
•
Model Upgrade
for DX80S2 (2.5inch,
dual-controller type)
to DX440S2
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
•
Model Upgrade
for DX80S2 (3.5inch,
single-controller type)
to DX410S2
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
ETEU84DC-L
N
Y
N
N
N
N
N
N
*1
N
–
–
–
–
–
–
–
–
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
*1:
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
N: Not preinstalled at the factory (packaged separately)
ETEAD1DU-L
ETEAD1DU
ETEAD2DU-L
ETEAD2DU
ETEAD1CU-L
ETEAD1CU
ETEAD2CU-L
ETEAD2CU
ET092SDU
ET092DDU
ET092SCU
ET092DCU
ET082SDU
ET082DDU
ET082SCU
Preinstalled (**)
Product ID
ET082DCU
Product name
Product ID
EOL
Component items
•
•
Model Upgrade
for DX80S2 (3.5inch,
dual-controller type)
to DX440S2
ETEU84DD-L
N
N
N
Y
N
N
N
N
N
–
–
–
–
–
–
–
–
*1
Currently
Available
•
•
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
*1:
•
•
Model Upgrade
for DX80S2 (2.5inch,
single-controller type)
to DX440S2
ETEU84SC-L
N
N
Y
N
N
N
N
N
N
–
–
–
–
–
–
–
–
*1
Currently
Available
•
•
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
•
*1:
•
•
Model Upgrade
for DX80S2 (3.5inch,
single-controller type)
to DX440S2
Host interface for DX400 S2
ETEU84SD-L
N
N
N
N
Y
N
N
N
*1
N
–
–
–
–
–
–
–
–
Currently
Available
•
•
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
•
*1:
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Host interface for DX400 S2
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
N: Not preinstalled at the factory (packaged separately)
ETEAD1DU-L
ETEAD1DU
ETEAD2DU-L
ETEAD2DU
ETEAD1CU-L
ETEAD1CU
ETEAD2CU-L
ETEAD2CU
ET092SDU
ET092DDU
ET092SCU
ET092DCU
ET082SDU
ET082DDU
ET082SCU
Preinstalled (**)
Product ID
ET082DCU
Product name
Product ID
EOL
Component items
•
•
Model Upgrade
for DX90S2 (2.5inch,
dual-controller type)
to DX410S2
ETEU91DC-L
N
N
N
N
N
Y
N
N
N
–
–
–
–
–
–
–
–
*1
Currently
Available
•
•
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
*1:
•
•
Model Upgrade
for DX90S2 (3.5inch,
dual-controller type)
to DX410S2
ETEU91DD-L
N
N
N
N
N
N
N
Y
N
–
–
–
–
–
–
–
–
*1
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
*1:
•
•
Model Upgrade
for DX90S2 (2.5inch,
single-controller type)
to DX410S2
ETEU91SC-L
N
N
N
N
N
N
Y
N
*1
N
–
–
–
–
–
–
–
–
Currently
Available
•
•
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
•
*1:
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Host interface for DX400 S2
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
N: Not preinstalled at the factory (packaged separately)
ETEAD1DU-L
ETEAD1DU
ETEAD2DU-L
ETEAD2DU
ETEAD1CU-L
ETEAD1CU
ETEAD2CU-L
ETEAD2CU
ET092SDU
ET092DDU
ET092SCU
ET092DCU
ET082SDU
ET082DDU
ET082SCU
Preinstalled (**)
Product ID
ET082DCU
Product name
Product ID
EOL
Component items
•
•
Model Upgrade
for DX90S2 (3.5inch,
single-controller type)
to DX410S2
ETEU91SD-L
N
N
N
N
N
N
N
N
Y
–
–
–
–
–
–
–
–
*1
Currently
Available
•
•
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
•
*1:
•
•
Model Upgrade
for DX90S2 (2.5inch,
dual-controller type)
to DX440S2
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
ETEU94DC-L
N
N
N
N
N
Y
N
N
N
–
–
–
–
–
–
–
–
*1
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
*1:
•
•
Model Upgrade
for DX90S2 (3.5inch,
dual-controller type)
to DX440S2
ETEU94DD-L
N
N
N
N
N
N
N
Y
*1
N
–
–
–
–
–
–
–
–
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
*1:
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
N: Not preinstalled at the factory (packaged separately)
ETEAD1DU-L
ETEAD1DU
ETEAD2DU-L
ETEAD2DU
ETEAD1CU-L
ETEAD1CU
ETEAD2CU-L
ETEAD2CU
ET092SDU
ET092DDU
ET092SCU
ET092DCU
ET082SDU
ET082DDU
ET082SCU
Preinstalled (**)
Product ID
ET082DCU
Product name
Product ID
EOL
Component items
•
•
Model Upgrade
for DX90S2 (2.5inch,
single-controller type)
to DX440S2
ETEU94SC-L
N
N
N
N
N
N
Y
N
N
–
–
–
–
–
–
–
–
*1
Currently
Available
•
•
*1:
•
•
ETEU94SD-L
N
N
N
N
N
N
N
N
Y
–
–
–
–
–
–
–
–
*1
Currently
Available
•
•
Upgrade license x 1
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
•
*1:
QSFP cable between
Drive Enclosure
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
•
Model Upgrade
for DX90S2 (3.5inch,
single-controller type)
to DX440S2
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
ETEC2Q1-L
N
N
N
N
N
N
N
N
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
N
Y
Y
Y
Y
Y
Y
Y
Y
Currently
Available
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is
required for an ETERNUS DX Disk storage
system.
•
QSFP cable (1.1m) x 2
•
Must be ordered when performing the model
upgrade to the DX410 S2/DX440 S2
N: Not preinstalled at the factory (packaged separately)
ETCAD1DU-L
ETCAD1DU
ETCAD2DU-L
ETCAD2DU
ETCAD1CU-L
ETCAD1CU
ETCAD2CU-L
ETCAD2CU
ET092SDCU
ET092DDCU
ET092SCCU
ET092DCCU
ET082SDCU
ET082DDCU
ET082SCCU
Product ID
Product ID
ET082DCCU
Product name
Preinstalled (**)
2.2 For China Region
EOL
Component items
Drive enclosure
•
ETCAD2CU
Y
Y
N
Y
N
Y
N
Y
N
–
–
–
–
–
–
–
•
–
Drive enclosure
for DX80 S2/DX90 S2
(2.5inch, dual-IOM
type)
Currently
Available
ETCAD2CU-L
N
Y
N
Y
N
Y
N
Y
N
–
–
–
–
–
–
–
•
•
•
–
•
•
ETCAD2DU
Y
Y
N
Y
N
Y
N
Y
N
–
–
–
–
–
–
–
•
–
Drive enclosure
for DX80 S2/DX90 S2
(3.5inch, dual-IOM
type)
Currently
Available
ETCAD2DU-L
N
Y
N
Y
N
Y
N
Y
N
–
–
–
–
–
–
–
•
•
•
–
•
•
ETCAD1CU
Y
N
Y
N
Y
N
Y
N
Y
–
–
–
–
–
–
–
•
–
Drive enclosure
for DX80 S2/DX90 S2
(2.5inch, single-IOM
type)
Currently
Available
ETCAD1CU-L
N
N
Y
N
Y
N
Y
N
Y
–
–
–
–
–
–
–
•
•
•
–
•
•
ETCAD1DU
Y
N
Y
N
Y
N
Y
N
Y
–
–
–
–
–
–
–
•
–
Drive enclosure
for DX80 S2/DX90 S2
(3.5inch, single-IOM
type)
Currently
Available
ETCAD1DU-L
N
N
Y
N
Y
N
Y
N
Y
–
–
–
–
–
–
–
•
•
•
–
•
Drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
AC cable (AC200 - 240V,
IEC60320-C13↔NEMA L6-15P: 4m) x 2
QSFP cable (0.75m) x 2
Rack mount kit x 1
Maximum number of 2.5" drives that can be
installed: 24
AC cable plug shape: NEMA L6-15P
Drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
AC cable (AC200 - 240V,
IEC60320-C13↔NEMA L6-15P: 4m) x 2
QSFP cable (0.75m) x 2
Rack mount kit x 1
Maximum number of 3.5" drives that can be
installed: 12
AC cable plug shape: NEMA L6-15P
Drive enclosure (2U) x 1
- I/O module x 1
- Power supply unit x 2
AC cable (AC200 - 240V,
IEC60320-C13↔NEMA L6-15P: 4m) x 2
QSFP cable (0.75m) x 1
Rack mount kit x 1
Maximum number of 2.5" drives that can be
installed: 24
AC cable plug shape: NEMA L6-15P
Drive enclosure (2U) x 1
- I/O module x 1
- Power supply unit x 2
AC cable (AC200 - 240V,
IEC60320-C13↔NEMA L6-15P: 4m) x 2
QSFP cable (0.75m) x 1
Rack mount kit x 1
Maximum number of 3.5" drives that can be
installed: 12
AC cable plug shape: NEMA L6-15P
Additional controller module
Additional controller
module for DX80 S2
ETCAC8A-L
N
N
Y
N
Y
N
N
N
N
–
–
–
–
–
–
–
–
Currently
Available
•
•
Controller x 1
•
Number of host interfaces that must be
ordered: 1
Number of host interfaces that can be added: 1
•
Additional controller
module for DX90 S2
ETCAC9A-L
N
N
N
N
N
N
Y
N
Y
–
–
–
–
–
–
–
–
Currently
Available
•
•
Controller x 1
•
Number of host interfaces that must be
ordered: 1
Number of host interfaces that can be added: 1
•
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Cache memory module (2GB) x 1
Cache memory module (4GB) x 1
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082DCCU
ET082SCCU
ET082DDCU
ET082SDCU
ET092DCCU
ET092SCCU
ET092DDCU
ET092SDCU
ETCAD2CU
ETCAD2CU-L
ETCAD1CU
ETCAD1CU-L
ETCAD2DU
ETCAD2DU-L
ETCAD1DU
ETCAD1DU-L
Product ID
ETCAMA-L
N
–
–
–
–
–
–
–
–
N
N
Y
Y
N
N
Y
Y
Host interface
for DX80 S2/DX90 S2
(8Gbit/s, FC, 2port)
ETCHF12
Y
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
ETCHF12-L
N
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
Host interface
for DX80 S2/DX90 S2
(10Gbit/s, iSCSI, 2port,
for optical cable)
ETCHY12
Y
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
Product name
Product ID
EOL
Component items
Additional IOM
Additional IOM
for DX80 S2/DX90 S2
Currently
Available
•
•
I/O module x 1
Currently
Available
•
•
Host interface adapter (FC, 2ports) x 1
•
•
Host interface adapter (iSCSI 10G, 2ports) x 1
QSFP cable (0.75m) x 1
Host interface
Currently
Available
ETCHY12-L
N
ETCHY1N
Y
ETCHY1N-L
N
ETCHL12
Y
ETCHL12-L
N
Host interface
for DX80 S2/DX90 S2
(SAS, 2port)
ETCHS12
Y
Y
Y
Y
ETCHS12-L
N
Y
Y
Host interface
for DX80 S2/DX90 S2
(FCoE, 2port,
for optical cable)
ETCHC12
Y
Y
ETCHC12-L
N
Host interface
for DX80 S2/DX90 S2
(FCoE, 2port, without
SFP+, for copper cable)
ETCHC1N
Y
Host interface
for DX80 S2/DX90 S2
(10Gbit/s, iSCSI, 2port,
without SFP+,
for copper cable)
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
Y
Y
Y
Y
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
*1:
•
Y
Y
Y
Y
Currently
Available
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
*1
*1
*1
*1
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
*1:
•
Host interface
for DX80 S2/DX90 S2
(1Gbit/s, iSCSI, 2port)
Currently
Available
ETCHC1N-L
N
ETCD3HG
ETCD3HG-L
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
–
–
–
–
–
–
–
–
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
–
–
–
–
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
*1
*1
*1
*1
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
Currently
Available
Currently
Available
Currently
Available
*1:
SFP+ (8Gbit/s) x 2
SFP+ (10Gbit/s) x 2
Firmware version V10L20 or later is
required for an ETERNUS DX Disk storage
system when performing REC.
Host interface adapter (iSCSI 10G, 2ports) x 1
Firmware version V10L30 or later is
required for an ETERNUS DX Disk storage
system.
Host interface adapter (iSCSI 1G, 2ports) x 1
Firmware version V10L16 or later is
required for an ETERNUS DX Disk storage
system when performing REC.
•
Host interface adapter (SAS, 2ports) x 1
•
•
Host interface adapter (FCoE, 2ports) x 1
•
Host interface adapter (FCoE, 2ports) x 1
*1:
SFP+ (10Gbit/s) x 2
Firmware version V10L30 or later is required
for an ETERNUS DX Disk storage system.
–
–
–
–
–
–
–
–
N
Y
N
Y
N
N
N
N
N
N
Y
Y
Y
Y
N
N
N
N
•
Hot spare
• 2.5" SAS disk drive (300GB/10krpm) x 1
Drive
Disk Drive(2.5inch)
300GB 15krpm x1
for DX80 S2/DX90 S2
Currently
Available
Hot spare
• 2.5" SAS disk drive (300GB/15krpm) x 1
2.5" SAS disk drive (300GB/15krpm) x 1
Disk Drive(2.5inch)
300GB 10krpm x1
for DX80 S2/DX90 S2
ETCD3HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
ETCD3HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
Disk Drive(2.5inch)
450GB 10krpm x1
for DX80 S2/DX90 S2
ETCD4HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
ETCD4HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
•
Hot spare
• 2.5" SAS disk drive (600GB/10krpm) x 1
Disk Drive(2.5inch)
600GB 10krpm x1
for DX80 S2/DX90 S2
Disk Drive(2.5inch)
900GB 10krpm x1
for DX80 S2/DX90 S2
Disk Drive(2.5inch)
1TB 7.2krpm x1
for DX80 S2/DX90 S2
Currently
Available
Currently
Available
•
2.5" SAS disk drive (300GB/10krpm) x 1
Hot spare
• 2.5" SAS disk drive (450GB/10krpm) x 1
2.5" SAS disk drive (450GB/10krpm) x 1
ETCD6HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
ETCD6HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
•
Hot spare
• 2.5" SAS disk drive (900GB/10krpm) x 1
Currently
Available
2.5" SAS disk drive (600GB/10krpm) x 1
ETCD9HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
ETCD9HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
•
Hot spare
• 2.5" Nearline SAS disk drive (1TB/7.2krpm) x 1
ETCN1HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
ETCN1HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Currently
Available
Currently
Available
•
2.5" SAS disk drive (900GB/10krpm) x 1
2.5" Nearline SAS disk drive (1TB/7.2krpm) x 1
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082SCCU
ET082DDCU
ET082SDCU
ET092DCCU
ET092SCCU
ET092DDCU
ET092SDCU
ETCAD2CU
ETCAD2CU-L
ETCAD1CU
ETCAD1CU-L
ETCAD2DU
ETCAD2DU-L
ETCAD1DU
ETCAD1DU-L
Product ID
ET082DCCU
Product name
Product ID
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
EOL
Component items
Hot spare
ETCS1HC
SSD(2.5inch) 100GB x1
for DX80 S2/DX90 S2
Currently
Available
ETCS1HC-L
ETCS2HC
N
Y
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
N
Y
Y
Y
N
N
N
N
N
N
N
N
Currently
Available
ETCS2HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
2.5" SSD (100GB) x 1
•
•
2.5" SSD (100GB) x 1
SLC type
SLC type
Hot spare
• 2.5" SSD (200GB) x 1
N
SSD(2.5inch) 200GB x1
for DX80 S2/DX90 S2
•
•
N
•
SLC type
•
•
2.5" SSD (200GB) x 1
SLC type
Hot spare
ETCS4HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
SSD(2.5inch) 400GB x1
for DX80 S2/DX90 S2
ETCS4HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
N
ETCS8HC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Disk Drive(3.5inch)
300GB 15krpm x1
for DX80 S2/DX90 S2
Disk Drive(3.5inch)
450GB 15krpm x1
for DX80 S2/DX90 S2
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Y
Y
N
N
N
2.5" SSD (400GB) x 1
•
•
2.5" SSD (400GB) x 1
SLC type
SLC type
Hot spare
• 2.5" SSD (800GB) x 1
•
MLC type
N
•
•
2.5" SSD (800GB) x 1
Hot spare
• 3.5" SAS disk drive (300GB/15krpm) x 1
Currently
Available
SSD(2.5inch) 800GB x1
for DX80 S2/DX90 S2
ETCS8HC-L
•
•
MLC type
ETCD3HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETCD3HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
•
Hot spare
• 3.5" SAS disk drive (450GB/15krpm) x 1
Currently
Available
3.5" SAS disk drive (300GB/15krpm) x 1
ETCD4HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETCD4HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
•
Hot spare
• 3.5" SAS disk drive (600GB/15krpm) x 1
Currently
Available
3.5" SAS disk drive (450GB/15krpm) x 1
Disk Drive(3.5inch)
600GB 15krpm x1
for DX80 S2/DX90 S2
ETCD6HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETCD6HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
Disk Drive(3.5inch)
1TB 7.2krpm x1
for DX80 S2/DX90 S2
ETCN1HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETCN1HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
•
Hot spare
• 3.5" Nearline SAS disk drive (2TB/7.2krpm) x 1
Disk Drive(3.5inch)
2TB 7.2krpm x1
for DX80 S2/DX90 S2
Disk Drive(3.5inch)
3TB 7.2krpm x1
for DX80 S2/DX90 S2
Currently
Available
Currently
Available
•
3.5" SAS disk drive (600GB/15krpm) x 1
Hot spare
• 3.5" Nearline SAS disk drive (1TB/7.2krpm) x 1
3.5" Nearline SAS disk drive (1TB/7.2krpm) x 1
ETCN2HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETCN2HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
•
Hot spare
• 3.5" Nearline SAS disk drive (3TB/7.2krpm) x 1
Currently
Available
3.5" Nearline SAS disk drive (2TB/7.2krpm) x 1
ETCN3HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
ETCN3HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
•
N
Hot spare
• 3.5" SSD (100GB) x 1
ETCS1HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
SSD(3.5inch) 100GB x1
for DX80 S2/DX90 S2
Currently
Available
Currently
Available
ETCS1HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
ETCS2HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
SSD(3.5inch) 200GB x1
for DX80 S2/DX90 S2
N
N
N
Y
Y
N
N
Y
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Y
N
N
N
N
Y
Y
Y
Y
•
SLC type
•
•
3.5" SSD (100GB) x 1
SLC type
Hot spare
• 3.5" SSD (200GB) x 1
Currently
Available
ETCS2HD-L
3.5" Nearline SAS disk drive (3TB/7.2krpm) x 1
•
SLC type
•
•
3.5" SSD (200GB) x 1
SLC type
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082SCCU
ET082DDCU
ET082SDCU
ET092DCCU
ET092SCCU
ET092DDCU
ET092SDCU
ETCAD2CU
ETCAD2CU-L
ETCAD1CU
ETCAD1CU-L
ETCAD2DU
ETCAD2DU-L
ETCAD1DU
ETCAD1DU-L
Product ID
ET082DCCU
Product name
Product ID
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
EOL
Component items
Hot spare
ETCS4HD
SSD(3.5inch) 400GB x1
for DX80 S2/DX90 S2
Currently
Available
ETCS4HD-L
ETCS8HD
N
Y
N
N
N
N
Y
Y
Y
Y
N
N
N
N
Y
Y
Y
Y
N
N
N
N
N
N
N
N
Y
Y
Y
N
Y
Y
Y
Currently
Available
ETCS8HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
Disk Drive(2.5inch)
300GB 15krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCD3MG
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
300GB 10krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCD3MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
450GB 10krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCD4MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
600GB 10krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCD6MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
900GB 10krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCD9MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
1TB 7.2krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCN1MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
SSD(2.5inch) 100GB x2
(RAID1)
for DX80 S2/DX90 S2
ETCS1MC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
SSD(2.5inch) 200GB x2
(RAID1)
for DX80 S2/DX90 S2
SSD(2.5inch) 400GB x2
(RAID1)
for DX80 S2/DX90 S2
SSD(2.5inch) 800GB x2
(RAID1)
for DX80 S2/DX90 S2
ETCS2MC
ETCS4MC
ETCS8MC
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Currently
Available
Currently
Available
Currently
Available
Disk Drive(3.5inch)
300GB 15krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCD3MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
450GB 15krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCD4MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
600GB 15krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCD6MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
1TB 7.2krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCN1MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
3.5" SSD (400GB) x 1
•
•
3.5" SSD (400GB) x 1
SLC type
SLC type
Hot spare
• 3.5" SSD (800GB) x 1
N
SSD(3.5inch) 800GB x1
for DX80 S2/DX90 S2
•
•
•
MLC type
•
•
3.5" SSD (800GB) x 1
MLC type
RAID1(1D+1M)
•
2.5" SAS disk drive (300GB/15krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (300GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (450GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (600GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" SAS disk drive (900GB/10krpm) x 2
RAID1(1D+1M)
• 2.5" Nearline SAS disk drive (1TB/7.2krpm) x 2
RAID1(1D+1M)
• 2.5" SSD (100GB) x 2
•
SLC type
RAID1(1D+1M)
•
•
2.5" SSD (200GB) x 2
SLC type
RAID1(1D+1M)
• 2.5" SSD (400GB) x 2
•
SLC type
RAID1(1D+1M)
• 2.5" SSD (800GB) x 2
•
MLC type
RAID1(1D+1M)
• 3.5" SAS disk drive (300GB/15krpm) x 2
RAID1(1D+1M)
• 3.5" SAS disk drive (450GB/15krpm) x 2
RAID1(1D+1M)
• 3.5" SAS disk drive (600GB/15krpm) x 2
RAID1(1D+1M)
• 3.5" Nearline SAS disk drive (1TB/7.2krpm) x 2
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082DCCU
ET082SCCU
ET082DDCU
ET082SDCU
ET092DCCU
ET092SCCU
ET092DDCU
ET092SDCU
ETCAD2CU
ETCAD2CU-L
ETCAD1CU
ETCAD1CU-L
ETCAD2DU
ETCAD2DU-L
ETCAD1DU
ETCAD1DU-L
Product ID
Disk Drive(3.5inch)
2TB 7.2krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCN2MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
3TB 7.2krpm x2
(RAID1)
for DX80 S2/DX90 S2
ETCN3MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
SSD(3.5inch)
100GB x2 (RAID1)
for DX80 S2/DX90 S2
ETCS1MD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Product name
SSD(3.5inch)
200GB x2 (RAID1)
for DX80 S2/DX90 S2
SSD(3.5inch)
400GB x2 (RAID1)
for DX80 S2/DX90 S2
SSD(3.5inch)
800GB x2 (RAID1)
for DX80 S2/DX90 S2
Product ID
ETCS2MD
ETCS4MD
ETCS8MD
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
EOL
Currently
Available
Currently
Available
Currently
Available
Disk Drive(2.5inch)
300GB 15krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCD3PG
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
300GB 10krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCD3PC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
450GB 10krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCD4PC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
600GB 10krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCD6PC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
900GB 10krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCD9PC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
1TB 7.2krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCN1PC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
SSD(2.5inch) 100GB x4
(RAID5)
for DX80 S2/DX90 S2
ETCS1PC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
SSD(2.5inch) 200GB x4
(RAID5)
for DX80 S2/DX90 S2
SSD(2.5inch) 400GB x4
(RAID5)
for DX80 S2/DX90 S2
SSD(2.5inch) 800GB x4
(RAID5)
for DX80 S2/DX90 S2
Disk Drive(3.5inch)
300GB 15krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCS2PC
ETCS4PC
ETCS8PC
ETCD3PD
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
N
N
N
N
Y
N
N
N
Y
Y
Y
Y
N
Y
Y
Y
N
N
N
N
Y
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
N
N
N
Y
Y
Y
Y
N
N
N
N
N
Y
Y
Y
N
N
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
Y
N
N
N
N
Currently
Available
Currently
Available
Currently
Available
Currently
Available
Component items
RAID1(1D+1M)
•
3.5" Nearline SAS disk drive (2TB/7.2krpm) x 2
RAID1(1D+1M)
• 3.5" Nearline SAS disk drive (3TB/7.2krpm) x 2
RAID1(1D+1M)
• 3.5" SSD (100GB) x 2
•
SLC type
RAID1(1D+1M)
• 3.5" SSD (200GB) x 2
•
SLC type
RAID1(1D+1M)
• 3.5" SSD (400GB) x 2
•
SLC type
RAID1(1D+1M)
• 3.5" SSD (800GB) x 2
•
MLC type
RAID5(5D+1P)
• 2.5" SAS disk drive (300GB/15krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (300GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (450GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (600GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" SAS disk drive (900GB/10krpm) x 6
RAID5(5D+1P)
• 2.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
RAID5(3D+1P)
• 2.5" SSD (100GB) x 4
•
SLC type
RAID5(3D+1P)
• 2.5" SSD (200GB) x 4
•
SLC type
RAID5(3D+1P)
• 2.5" SSD (400GB) x 4
•
SLC type
RAID5(3D+1P)
• 2.5" SSD (800GB) x 4
•
MLC type
RAID5(5D+1P)
• 3.5" SAS disk drive (300GB/15krpm) x 6
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082DCCU
ET082SCCU
ET082DDCU
ET082SDCU
ET092DCCU
ET092SCCU
ET092DDCU
ET092SDCU
ETCAD2CU
ETCAD2CU-L
ETCAD1CU
ETCAD1CU-L
ETCAD2DU
ETCAD2DU-L
ETCAD1DU
ETCAD1DU-L
Product ID
Disk Drive(3.5inch)
450GB 15krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCD4PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
600GB 15krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCD6PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
1TB 7.2krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCN1PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
2TB 7.2krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCN2PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
3TB 7.2krpm x6
(RAID5)
for DX80 S2/DX90 S2
ETCN3PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
SSD(3.5inch) 100GB x4
(RAID5)
for DX80 S2/DX90 S2
ETCS1PD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Product name
SSD(3.5inch) 200GB x4
(RAID5)
for DX80 S2/DX90 S2
SSD(3.5inch) 400GB x4
(RAID5)
for DX80 S2/DX90 S2
SSD(3.5inch) 800GB x4
(RAID5)
for DX80 S2/DX90 S2
Product ID
ETCS2PD
ETCS4PD
ETCS8PD
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
EOL
Currently
Available
Currently
Available
Currently
Available
Disk Drive(2.5inch)
300GB 15krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCD3DG
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
300GB 10krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCD3DC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
450GB 10krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCD4DC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
600GB 10krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCD6DC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
900GB 10krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCD9DC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
1TB 7.2krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCN1DC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(3.5inch)
300GB 15krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCD3DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
450GB 15krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCD4DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Component items
RAID5(5D+1P)
•
3.5" SAS disk drive (450GB/15krpm) x 6
RAID5(5D+1P)
• 3.5" SAS disk drive (600GB/10krpm) x 6
RAID5(5D+1P)
• 3.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
RAID5(5D+1P)
• 3.5" Nearline SAS disk drive (2TB/7.2krpm) x 6
RAID5(5D+1P)
• 3.5" Nearline SAS disk drive (3TB/7.2krpm) x 6
RAID5(3D+1P)
• 3.5" SSD (100GB) x 4
•
SLC type
RAID5(3D+1P)
•
•
3.5" SSD (200GB) x 4
SLC type
RAID5(3D+1P)
• 3.5" SSD (400GB) x 4
•
SLC type
RAID5(3D+1P)
• 3.5" SSD (800GB) x 4
•
MLC type
RAID6(4D+2P)
• 2.5" SAS disk drive (300GB/15krpm) x 6
RAID6(4D+2P)
• 2.5" SAS disk drive (300GB/10krpm) x 6
RAID6(4D+2P)
• 2.5" SAS disk drive (450GB/10krpm) x 6
RAID6(4D+2P)
• 2.5" SAS disk drive (600GB/10krpm) x 6
RAID6(4D+2P)
• 2.5" SAS disk drive (900GB/10krpm) x 6
RAID6(4D+2P)
• 2.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
RAID6(4D+2P)
• 3.5" SAS disk drive (300GB/15krpm) x 6
RAID6(4D+2P)
• 3.5" SAS disk drive (450GB/15krpm) x 6
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082DCCU
ET082SCCU
ET082DDCU
ET082SDCU
ET092DCCU
ET092SCCU
ET092DDCU
ET092SDCU
ETCAD2CU
ETCAD2CU-L
ETCAD1CU
ETCAD1CU-L
ETCAD2DU
ETCAD2DU-L
ETCAD1DU
ETCAD1DU-L
Product ID
Disk Drive(3.5inch)
600GB 15krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCD6DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
1TB 7.2krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCN1DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
2TB 7.2krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCN2DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
3TB 7.2krpm x6
(RAID6)
for DX80 S2/DX90 S2
ETCN3DD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(2.5inch)
300GB 15krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCD3SG
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
300GB 10krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCD3SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
450GB 10krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCD4SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
600GB 10krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCD6SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
900GB 10krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCD9SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Disk Drive(2.5inch)
1TB 7.2krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCN1SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
SSD(2.5inch) 100GB x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCS1SC
Y
Y
Y
N
N
Y
Y
N
N
Y
N
Y
N
N
N
N
N
Currently
Available
Product name
SSD(2.5inch) 200GB x6
(RAID1+0)
for DX80 S2/DX90 S2
SSD(2.5inch) 400GB x6
(RAID1+0)
for DX80 S2/DX90 S2
SSD(2.5inch) 800GB x6
(RAID1+0)
for DX80 S2/DX90 S2
Product ID
ETCS2SC
ETCS4SC
ETCS8SC
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
EOL
Currently
Available
Currently
Available
Currently
Available
Disk Drive(3.5inch)
300GB 15krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCD3SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
450GB 15krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCD4SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
600GB 15krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCD6SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Component items
RAID6(4D+2P)
•
3.5" SAS disk drive (600GB/15krpm) x 6
RAID6(4D+2P)
• 3.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
RAID6(4D+2P)
• 3.5" Nearline SAS disk drive (2TB/7.2krpm) x 6
RAID6(4D+2P)
• 3.5" Nearline SAS disk drive (3TB/7.2krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (300GB/15krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (300GB/10krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (450GB/10krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (600GB/10krpm) x 6
RAID1+0(3D+3M)
• 2.5" SAS disk drive (900GB/10krpm) x 6
RAID1+0(3D+3M)
• 2.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
RAID1+0(3D+3M)
• 2.5" SSD (100GB) x 6
•
SLC type
RAID1+0(3D+3M)
•
•
2.5" SSD (200GB) x 6
SLC type
RAID1+0(3D+3M)
• 2.5" SSD (400GB) x 6
•
SLC type
RAID1+0(3D+3M)
• 2.5" SSD (800GB) x 6
•
MLC type
RAID1+0(3D+3M)
• 3.5" SAS disk drive (300GB/15krpm) x 6
RAID1+0(3D+3M)
• 3.5" SAS disk drive (450GB/15krpm) x 6
RAID1+0(3D+3M)
• 3.5" SAS disk drive (600GB/15krpm) x 6
N: Not preinstalled at the factory (packaged separately)
Preinstalled (**)
ET082DCCU
ET082SCCU
ET082DDCU
ET082SDCU
ET092DCCU
ET092SCCU
ET092DDCU
ET092SDCU
ETCAD2CU
ETCAD2CU-L
ETCAD1CU
ETCAD1CU-L
ETCAD2DU
ETCAD2DU-L
ETCAD1DU
ETCAD1DU-L
Product ID
Disk Drive(3.5inch)
1TB 7.2krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCN1SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
2TB 7.2krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCN2SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
Disk Drive(3.5inch)
3TB 7.2krpm x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCN3SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
SSD(3.5inch) 100GB x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCS1SD
Y
N
N
Y
Y
N
N
Y
Y
N
N
N
N
Y
N
Y
N
Currently
Available
SSD(3.5inch) 200GB x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCS2SD
SSD(3.5inch) 400GB x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCS4SD
SSD(3.5inch) 800GB x6
(RAID1+0)
for DX80 S2/DX90 S2
ETCS8SD
Product name
Product ID
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
EOL
Currently
Available
Currently
Available
Currently
Available
Component items
RAID1+0(3D+3M)
•
3.5" Nearline SAS disk drive (1TB/7.2krpm) x 6
RAID1+0(3D+3M)
• 3.5" Nearline SAS disk drive (2TB/7.2krpm) x 6
RAID1+0(3D+3M)
• 3.5" Nearline SAS disk drive (3TB/7.2krpm) x 6
RAID1+0(3D+3M)
• 3.5" SSD (100GB) x 6
•
SLC type
RAID1+0(3D+3M)
•
•
3.5" SSD (200GB) x 6
SLC type
RAID1+0(3D+3M)
• 3.5" SSD (400GB) x 6
•
SLC type
RAID1+0(3D+3M)
• 3.5" SSD (800GB) x 6
•
MLC type
•
•
Power distribution unit (1U) x 1
Power distribution unit
Power distribution unit
for DX80 S2/DX90 S2
(AC200-240V, 1U,
Max 2 enclosures
connection)
ETEP4BU-L
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Currently
Available
•
•
•
•
•
Power distribution unit
for DX80 S2/DX90 S2
(AC200-240V, 2U,
Max 6 enclosures
connection)
ETEP12U-L
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Currently
Available
•
•
•
•
•
Power distribution unit
for DX80 S2/DX90 S2
(AC200-240V, 2U,
Max 8 enclosures
connection)
ETEP16U-L
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Currently
Available
•
•
Input AC cable (AC200V - 240V,
IEC60320-C13↔NEMA L6-15P: 4m) x 2
Output AC cable
(IEC60320-C13↔IEC60320-C14: 3m) x 4
Connects to any of the 2
controller enclosure/drive enclosures
Input AC cable plug shape: NEMA L6-15P
Power distribution unit (1U) x 2
Input AC cable (AC200V - 240V,
direct connection↔NEMA L6-20P: 4m) x 2
Output AC cable
(IEC60320-C13↔IEC60320-C14: 3m) x 12
Connects to any of the 6
controller enclosure/drive enclosures
Input AC cable plug shape: NEMA L6-20P
Power distribution unit (1U) x 2
Input AC cable (AC200V - 240V,
direct connection↔NEMA L6-30P: 4m) x 2
Output AC cable
(IEC60320-C13↔IEC60320-C14: 3m) x 16
•
Connects to any of the 8
controller enclosure/drive enclosures
Input AC cable plug shape: NEMA L6-30P
•
QSFP cable (3m) x 1
•
Must be ordered when the QSFP cable
supplied with the drive enclosure (0.75m) is
too short to connect
Extension QSFP cable between enclosures
Extension QSFP cable
between enclosures
for DX80 S2/DX90 S2
(3m)
ETEC1Q3-L
N
Y
Y
Y
Y
Y
Y
Y
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Currently
Available
N: Not preinstalled at the factory (packaged separately)
Extension QSFP cable
between enclosures
for DX80 S2/DX90 S2
(6m)
ETCAD1DU-L
ETCAD1DU
ETCAD2DU-L
ETCAD2DU
ETCAD1CU-L
ETCAD1CU
ETCAD2CU-L
ETCAD2CU
ET092SDCU
ET092DDCU
ET092SCCU
ET092DCCU
ET082SDCU
ET082DDCU
ET082SCCU
Preinstalled (**)
Product ID
ET082DCCU
Product name
Product ID
ETEC1Q6-L
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
ETCL8T
Y
Y
N
Y
N
N
N
N
N
–
–
–
–
–
–
–
–
ETCL8T-L
N
ETCL9T
Y
ETCL9T-L
N
EOL
Currently
Available
Component items
•
QSFP cable (6m) x 1
•
Must be ordered when the QSFP cable
supplied with the drive enclosure (0.75m) is
too short to connect
•
License label x 1
License
Thin Provisioning
Feature License
for DX80 S2
Thin Provisioning
Feature License
for DX90 S2
Currently
Available
Y
Y
Y
*1
N
N
Y
N
N
N
N
–
–
–
–
–
–
–
–
Y
N
Y
N
–
–
–
–
–
–
–
–
N
An additional controller module for the
DX80 S2 must be ordered.
*1
N
N
•
Currently
Available
N
*1:
N
N
Y
Y
Y
*1
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Y
–
–
–
–
–
–
–
–
*1:
License label x 1
An additional controller module for the
DX90 S2 must be ordered.
*1
N: Not preinstalled at the factory (packaged separately)
FTS:ETEAD1DU
FTS:ETEAD2DU
FTS:ETEAD1CU
FTS:ETEAD2CU
FTS:ET092SDU
FTS:ET092DDU
FTS:ET092SCU
FTS:ET092DCU
FTS:ET082SDU
FTS:ET082DDU
FTS:ET082SCU
Product ID
Product ID
FTS:ET082DCU
Product name
Preinstalled (**)
2.3 For EMEA&I Region
EOL
Component items
Drive enclosure
•
Drive enclosure
for DX80 S2/DX90 S2
(2.5inch, dual-IOM
type)
Drive enclosure
for DX80 S2/DX90 S2
(3.5inch, dual-IOM
type)
Drive enclosure
for DX80 S2/DX90 S2
(2.5inch, single-IOM
type)
Drive enclosure
for DX80 S2/DX90 S2
(3.5inch, single-IOM
type)
•
FTS:ETEAD2CU
Y/N
Y
N
Y
N
Y
N
Y
N
–
–
–
–
Currently
Available
•
•
FTS:ETEAD2DU
Y/N
Y
N
Y
N
Y
N
Y
N
–
–
–
–
Y/N
N
Y
N
Y
N
Y
N
Y
–
–
–
–
Currently
Available
•
Drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G:
2.5m) x 2
QSFP cable (0.75m) x 2
•
•
FTS:ETEAD1DU
N
Y
N
Y
N
Y
N
Y
–
–
–
–
Currently
Available
AC cable plug shape: IEC60320-C14G
Rack mount kit x 1
•
•
Maximum number of 3.5" drives that can be installed: 12
•
Drive enclosure (2U) x 1
- I/O module x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G:
2.5m) x 2
QSFP cable (0.75m) x 2
•
•
AC cable plug shape: IEC60320-C14G
Rack mount kit x 1
•
•
Maximum number of 2.5" drives that can be installed: 24
•
Drive enclosure (2U) x 1
- I/O module x 1
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G:
2.5m) x 2
QSFP cable (0.75m) x 2
•
Y/N
Rack mount kit x 1
Maximum number of 2.5" drives that can be installed: 24
•
FTS:ETEAD1CU
QSFP cable (0.75m) x 2
•
•
•
Currently
Available
Drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
AC cable (AC200V - 240V, IEC60320-C13↔IEC60320-C14G:
2.5m) x 2
•
•
AC cable plug shape: IEC60320-C14G
Rack mount kit x 1
•
•
Maximum number of 3.5" drives that can be installed: 12
•
•
Controller x 1
•
•
Number of host interfaces that must be ordered: 1
•
•
Controller x 1
•
•
Number of host interfaces that must be ordered: 1
•
•
I/O module x 1
AC cable plug shape: IEC60320-C14G
Additional controller module
Additional controller
module for DX80 S2
Additional controller
module for DX90 S2
FTS:ETEAC8A-L
FTS:ETEAC9A-L
N
N
N
N
Y
N
N
N
Y
N
N
N
N
Y
N
N
N
Y
–
–
–
–
–
–
–
–
Currently
Available
Currently
Available
Cache memory module (2GB) x 1
Number of host interfaces that can be added: 1
Cache memory module (4GB) x 1
Number of host interfaces that can be added: 1
Additional IOM
Additional IOM
for DX80 S2/DX90 S2
FTS:ETEAMA-L
N
–
–
–
–
–
–
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
–
–
N
Y
N
Y
Currently
Available
QSFP cable (0.75m) x 1
N: Not preinstalled at the factory (packaged separately)
FTS:ET082DCU
FTS:ET082SCU
FTS:ET082DDU
FTS:ET082SDU
FTS:ET092DCU
FTS:ET092SCU
FTS:ET092DDU
FTS:ET092SDU
FTS:ETEAD2CU
FTS:ETEAD1CU
FTS:ETEAD2DU
FTS:ETEAD1DU
Product ID
Preinstalled (**)
Product name
Product ID
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
EOL
Component items
Host interface
FTS:ETEHH12
Y
Host interface
for DX80 S2/DX90 S2
(16Gbit/s, FC, 2port)
FTS:ETEHH12-L
N
Host interface
for DX80 S2/DX90 S2
(8Gbit/s, FC, 2port)
FTS:ETEHF12
Y
Y
Y
Y
Y
Y
Y
Y
FTS:ETEHF12-L
N
Y
Y
Y
Y
Y
Y
Y
FTS:ETEHX12
Y
Y
Y
Y
Y
Y
Y
Y
Y
Host interface
for DX80 S2/DX90 S2
(10Gbit/s, iSCSI, 2port,
for optical cable)
Host interface
for DX80 S2/DX90 S2
(10Gbit/s, iSCSI, 2port,
for optical cable)
Host interface
for DX80 S2/DX90 S2
(10Gbit/s, iSCSI, 2port,
without SFP+,
for copper cable)
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
*1
*1
*1
*1
–
–
Y
–
–
–
–
Y
–
–
–
–
–
–
–
–
N
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
FTS:ETEHY12
Y
Y
Y
Y
Y
Y
Y
Y
Y
–
–
–
–
FTS:ETEHY12-L
N
FTS:ETEHY1N
Y
FTS:ETEHY1N-L
N
FTS:ETEHL12
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
*1
*1
*1
*1
Y
Y
Y
Y
Y
Y
Y
Y
FTS:ETEHL12-L
N
Host interface
for DX80 S2/DX90 S2
(SAS, 2port)
FTS:ETEHS12
Y
Y
Y
Y
Y
Y
Y
Y
FTS:ETEHS12-L
N
Y
Y
Y
Y
Y
Y
Y
FTS:ETEHC12
Y
Y
Y
Y
Y
Y
Y
Y
FTS:ETEHC12-L
N
Y
Y
Y
Y
Y
Y
FTS:ETEHC1N
Y
Y
Y
Y
Y
Y
Y
Host interface
for DX80 S2/DX90 S2
(FCoE, 2port, without
SFP+, for copper cable)
–
FTS:ETEHX12-L
Host interface
for DX80 S2/DX90 S2
(1Gbit/s, iSCSI, 2port)
Host interface
for DX80 S2/DX90 S2
(FCoE, 2port,
for optical cable)
–
FTS:ETEHC1N-L
N
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Y
–
–
–
–
Y
–
–
–
–
Y
–
–
–
–
Y
Y
–
–
–
–
Y
Y
–
–
–
–
Y
Y
Y
Y
Y
Y
Y
Y
*1
*1
*1
*1
*1
*1
*1
*1
–
–
–
–
Currently
Available
•
•
*1:
Host interface adapter (FC, 2ports) x 1
SFP+ (16Gbit/s) x 2
Firmware version V10L40 or later is required for an
ETERNUS DX Disk storage system.
Currently
Available
•
•
Host interface adapter (FC, 2ports) x 1
•
•
Host interface adapter (iSCSI 10G, 2ports) x 1
2012/02
•
•
Host interface adapter (iSCSI 10G, 2ports) x 1
Currently
Available
*1:
•
Currently
Available
Currently
Available
Currently
Available
Currently
Available
Currently
Available
*1:
•
*1:
SFP+ (8Gbit/s) x 2
SFP+ (10Gbit/s) x 2
SFP+ (10Gbit/s) x 2
Firmware version V10L20 or later is required for an
ETERNUS DX Disk storage system when performing REC.
Host interface adapter (iSCSI 10G, 2ports) x 1
Firmware version V10L30 or later is required for an
ETERNUS DX Disk storage system.
Host interface adapter (iSCSI 1G, 2ports) x 1
Firmware version V10L16 or later is required for an
ETERNUS DX Disk storage system when performing REC.
•
Host interface adapter (SAS, 2ports) x 1
•
•
Host interface adapter (FCoE, 2ports) x 1
•
Host interface adapter (FCoE, 2ports) x 1
*1:
SFP+ (10Gbit/s) x 2
Firmware version V10L30 or later is required for an
ETERNUS DX Disk storage system.
Drive
Disk Drive(2.5inch)
300GB 15krpm x1
for DX80 S2/DX90 S2
FTS:ETED3HG
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETED3HG-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Disk Drive(2.5inch)
300GB 10krpm x1
for DX80 S2/DX90 S2
FTS:ETED3HC
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETED3HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Disk Drive(2.5inch)
450GB 10krpm x1
for DX80 S2/DX90 S2
FTS:ETED4HC
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETED4HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Disk Drive(2.5inch)
600GB 10krpm x1
for DX80 S2/DX90 S2
FTS:ETED6HC
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETED6HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Disk Drive(2.5inch)
900GB 10krpm x1
for DX80 S2/DX90 S2
FTS:ETED9HC
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETED9HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETED3HE
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Self Encrypting Disk
Drive(2.5inch) 300GB
10krpm x1
for DX80 S2/DX90 S2
Self Encrypting Disk
Drive(2.5inch) 450GB
10krpm x1
for DX80 S2/DX90 S2
FTS:ETED3HE-L
N
FTS:ETED4HE
Y
FTS:ETED4HE-L
N
Y
Y
*1
*1
Y
Y
Y
Y
*1
*1
N
N
N
N
N
N
Y
Y
*1
*1
Y
Y
Y
Y
*1
*1
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
N
N
N
N
N
N
Y
Y
*1
*1
Y
Y
Y
Y
*1
*1
N
N
N
N
N
N
Currently
Available
Currently
Available
Currently
Available
Currently
Available
Currently
Available
Currently
Available
Currently
Available
•
2.5" SAS disk drive (300GB/15krpm) x 1
•
2.5" SAS disk drive (300GB/10krpm) x 1
•
2.5" SAS disk drive (450GB/10krpm) x 1
•
2.5" SAS disk drive (600GB/10krpm) x 1
•
2.5" SAS disk drive (900GB/10krpm) x 1
•
2.5" SAS disk drive (300GB/10krpm) x 1
*1:
•
*1:
Firmware version V10L20 or later is required for an
ETERNUS DX Disk storage system.
2.5" SAS disk drive (450GB/10krpm) x 1
Firmware version V10L20 or later is required for an
ETERNUS DX Disk storage system.
N: Not preinstalled at the factory (packaged separately)
Self Encrypting Disk
Drive(2.5inch) 900GB
10krpm x1
for DX80 S2/DX90 S2
FTS:ETED6HE-L
N
FTS:ETED9HE
Y
FTS:ETED9HE-L
N
FTS:ET082DDU
FTS:ET082SDU
FTS:ET092DCU
FTS:ET092SCU
FTS:ET092DDU
FTS:ET092SDU
FTS:ETEAD2CU
FTS:ETEAD1CU
FTS:ETEAD2DU
FTS:ETEAD1DU
Y
FTS:ET082SCU
FTS:ETED6HE
FTS:ET082DCU
Self Encrypting Disk
Drive(2.5inch) 600GB
10krpm x1
for DX80 S2/DX90 S2
Product ID
Preinstalled (**)
Product name
Product ID
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
*1
*1
Y
Y
Y
Y
*1
*1
N
N
N
N
N
N
Y
Y
*1
*1
Y
Y
Y
Y
*1
*1
N
N
N
N
N
N
Y
Y
*1
*1
Y
Y
Y
Y
*1
*1
N
N
N
N
N
N
EOL
Currently
Available
Currently
Available
2.5" SAS disk drive (900GB/10krpm) x 1
Firmware version V10L20 or later is required for an
ETERNUS DX Disk storage system.
2.5" SSD (100GB) x 1
Currently
Available
•
•
2.5" SSD (200GB) x 1
Currently
Available
•
•
2.5" SSD (400GB) x 1
Currently
Available
•
•
2.5" SSD (800GB) x 1
•
3.5" SAS disk drive (300GB/15krpm) x 1
•
3.5" SAS disk drive (450GB/15krpm) x 1
•
3.5" SAS disk drive (600GB/15krpm) x 1
•
3.5" Nearline SAS disk drive (1TB/7.2krpm) x 1
•
3.5" Nearline SAS disk drive (2TB/7.2krpm) x 1
•
3.5" Nearline SAS disk drive (3TB/7.2krpm) x 1
Currently
Available
•
•
3.5" SSD (100GB) x 1
Currently
Available
•
•
3.5" SSD (200GB) x 1
Currently
Available
•
•
3.5" SSD (400GB) x 1
Currently
Available
•
•
3.5" SSD (800GB) x 1
•
License label x 1
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
SSD(2.5inch) 100GB x1
for DX80 S2/DX90 S2
FTS:ETES1HC
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETES1HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETES2HC
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETES2HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETES4HC
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETES4HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
SSD(2.5inch) 800GB x1
for DX80 S2/DX90 S2
FTS:ETES8HC
Y
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
FTS:ETES8HC-L
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Disk Drive(3.5inch)
300GB 15krpm x1
for DX80 S2/DX90 S2
FTS:ETED3HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETED3HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Disk Drive(3.5inch)
450GB 15krpm x1
for DX80 S2/DX90 S2
FTS:ETED4HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETED4HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Disk Drive(3.5inch)
600GB 15krpm x1
for DX80 S2/DX90 S2
FTS:ETED6HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETED6HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Disk Drive(3.5inch)
1TB 7.2krpm x1
for DX80 S2/DX90 S2
FTS:ETEN1HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETEN1HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Disk Drive(3.5inch)
2TB 7.2krpm x1
for DX80 S2/DX90 S2
FTS:ETEN2HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETEN2HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Disk Drive(3.5inch)
3TB 7.2krpm x1
for DX80 S2/DX90 S2
FTS:ETEN3HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETEN3HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
SSD(3.5inch) 100GB x1
for DX80 S2/DX90 S2
FTS:ETES1HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETES1HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETES2HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETES2HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETES4HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETES4HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETES8HD
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
FTS:ETES8HD-L
N
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
Thin Provisioning
Feature License
for DX80 S2
FTS:ETEL8T
N
Y
Y
Y
Y
N
N
N
N
–
–
–
–
Currently
Available
Thin Provisioning
Feature License
for DX90 S2
FTS:ETEL9T
N
Y
Y
Y
Y
–
–
–
–
Currently
Available
SSD(3.5inch) 800GB x1
for DX80 S2/DX90 S2
*1:
Firmware version V10L20 or later is required for an
ETERNUS DX Disk storage system.
•
•
Y
N
SSD(3.5inch) 400GB x1
for DX80 S2/DX90 S2
•
2.5" SAS disk drive (600GB/10krpm) x 1
Currently
Available
Y
SSD(3.5inch) 200GB x1
for DX80 S2/DX90 S2
*1:
2.5" Nearline SAS disk drive (1TB/7.2krpm) x 1
FTS:ETEN1HC
FTS:ETEN1HC-L
SSD(2.5inch) 400GB x1
for DX80 S2/DX90 S2
•
•
Disk Drive(2.5inch) 1TB
7.2krpm x1
for DX80 S2/DX90 S2
SSD(2.5inch) 200GB x1
for DX80 S2/DX90 S2
Component items
Currently
Available
Currently
Available
Currently
Available
Currently
Available
Currently
Available
Currently
Available
Currently
Available
SLC type
SLC type
SLC type
MLC type
SLC type
SLC type
SLC type
MLC type
License
*1
N
*1
N
*1
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
*1
*1:
•
*1:
An additional controller module for the DX80 S2 must
be ordered.
License label x 1
An additional controller module for the DX90 S2 must
be ordered.
N: Not preinstalled at the factory (packaged separately)
FTS:ETEAD1DU
FTS:ETEAD2DU
FTS:ETEAD1CU
FTS:ETEAD2CU
FTS:ET092SDU
FTS:ET092DDU
FTS:ET092SCU
FTS:ET092DCU
FTS:ET082SDU
FTS:ET082DDU
FTS:ET082SCU
FTS:ET082DCU
Product ID
Preinstalled (**)
Product name
Product ID
EOL
Component items
Model upgrade
Model Upgrade
for DX80S2 to DX90S2
(dual-controller type)
FTS:ETEU89DB-L
N
Y
N
*1
Y
N
N
N
N
N
–
–
–
–
*1
•
•
•
Currently
Available
*1:
Model Upgrade
for DX80S2 to DX90S2
(single-controller type)
FTS:ETEU89SB-L
N
N
Y
N
*1
Y
N
N
N
N
–
–
–
–
*1
•
•
•
Currently
Available
*1:
•
•
Model Upgrade
for DX80S2 (2.5inch,
dual-controller type)
to DX410S2
FTS:ETEU81DC-L
N
Y
N
N
N
N
N
N
N
–
–
–
–
*1
Currently
Available
•
•
Controller x 2
Cache memory module (4GB) x 2
Upgrade license x 1
Firmware version V10L20 or later is required for an
ETERNUS DX Disk storage system.
Controller x 1
Cache memory module (4GB) x 1
Upgrade license x 1
Firmware version V10L20 or later is required for an
ETERNUS DX Disk storage system.
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
*1:
•
•
Model Upgrade
for DX80S2 (3.5inch,
dual-controller type)
to DX410S2
FTS:ETEU81DD-L
N
N
N
Y
N
N
N
*1
N
N
–
–
–
–
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
•
•
•
*1:
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Cache memory for DX410 S2
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
N: Not preinstalled at the factory (packaged separately)
FTS:ETEAD1DU
FTS:ETEAD2DU
FTS:ETEAD1CU
FTS:ETEAD2CU
FTS:ET092SDU
FTS:ET092DDU
FTS:ET092SCU
FTS:ET092DCU
FTS:ET082SDU
FTS:ET082DDU
FTS:ET082SCU
FTS:ET082DCU
Product ID
Preinstalled (**)
Product name
Product ID
EOL
Component items
•
•
Model Upgrade
for DX80S2 (2.5inch,
single-controller type)
to DX410S2
FTS:ETEU81SC-L
N
N
Y
N
N
N
N
N
N
–
–
–
–
*1
Currently
Available
•
•
*1:
•
•
FTS:ETEU81SD-L
N
N
N
N
Y
N
N
N
N
–
–
–
–
*1
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
•
*1:
•
•
Model Upgrade
for DX80S2 (2.5inch,
dual-controller type)
to DX440S2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
•
Model Upgrade
for DX80S2 (3.5inch,
single-controller type)
to DX410S2
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
FTS:ETEU84DC-L
N
Y
N
N
N
N
N
*1
N
N
–
–
–
–
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
*1:
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
N: Not preinstalled at the factory (packaged separately)
FTS:ETEAD1DU
FTS:ETEAD2DU
FTS:ETEAD1CU
FTS:ETEAD2CU
FTS:ET092SDU
FTS:ET092DDU
FTS:ET092SCU
FTS:ET092DCU
FTS:ET082SDU
FTS:ET082DDU
FTS:ET082SCU
FTS:ET082DCU
Product ID
Preinstalled (**)
Product name
Product ID
EOL
Component items
•
•
Model Upgrade
for DX80S2 (3.5inch,
dual-controller type)
to DX440S2
FTS:ETEU84DD-L
N
N
N
Y
N
N
N
N
N
–
–
–
–
*1
Currently
Available
•
•
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
*1:
•
•
Model Upgrade
for DX80S2 (2.5inch,
single-controller type)
to DX440S2
FTS:ETEU84SC-L
N
N
Y
N
N
N
N
N
N
–
–
–
–
*1
Currently
Available
•
•
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
•
*1:
•
•
Model Upgrade
for DX80S2 (3.5inch,
single-controller type)
to DX440S2
Host interface for DX400 S2
FTS:ETEU84SD-L
N
N
N
N
Y
N
N
*1
N
N
–
–
–
–
Currently
Available
•
•
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
•
*1:
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Host interface for DX400 S2
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
N: Not preinstalled at the factory (packaged separately)
FTS:ETEAD1DU
FTS:ETEAD2DU
FTS:ETEAD1CU
FTS:ETEAD2CU
FTS:ET092SDU
FTS:ET092DDU
FTS:ET092SCU
FTS:ET092DCU
FTS:ET082SDU
FTS:ET082DDU
FTS:ET082SCU
FTS:ET082DCU
Product ID
Preinstalled (**)
Product name
Product ID
EOL
Component items
•
•
Model Upgrade
for DX90S2 (2.5inch,
dual-controller type)
to DX410S2
FTS:ETEU91DC-L
N
N
N
N
N
Y
N
N
N
–
–
–
–
*1
Currently
Available
•
•
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
*1:
•
•
Model Upgrade
for DX90S2 (3.5inch,
dual-controller type)
to DX410S2
FTS:ETEU91DD-L
N
N
N
N
N
N
N
Y
N
–
–
–
–
*1
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
*1:
•
•
Model Upgrade
for DX90S2 (2.5inch,
single-controller type)
to DX410S2
FTS:ETEU91SC-L
N
N
N
N
N
N
Y
*1
N
N
–
–
–
–
Currently
Available
•
•
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
•
*1:
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Host interface for DX400 S2
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
N: Not preinstalled at the factory (packaged separately)
FTS:ETEAD1DU
FTS:ETEAD2DU
FTS:ETEAD1CU
FTS:ETEAD2CU
FTS:ET092SDU
FTS:ET092DDU
FTS:ET092SCU
FTS:ET092DCU
FTS:ET082SDU
FTS:ET082DDU
FTS:ET082SCU
FTS:ET082DCU
Product ID
Preinstalled (**)
Product name
Product ID
EOL
Component items
•
•
Model Upgrade
for DX90S2 (3.5inch,
single-controller type)
to DX410S2
FTS:ETEU91SD-L
N
N
N
N
N
N
N
N
Y
–
–
–
–
*1
Currently
Available
•
•
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX410 S2
•
•
•
*1:
•
•
Model Upgrade
for DX90S2 (2.5inch,
dual-controller type)
to DX440S2
DX410 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
FTS:ETEU94DC-L
N
N
N
N
N
Y
N
N
N
–
–
–
–
*1
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
*1:
•
•
Model Upgrade
for DX90S2 (3.5inch,
dual-controller type)
to DX440S2
FTS:ETEU94DD-L
N
N
N
N
N
N
N
Y
*1
N
–
–
–
–
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
*1:
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
N: Not preinstalled at the factory (packaged separately)
FTS:ETEAD1DU
FTS:ETEAD2DU
FTS:ETEAD1CU
FTS:ETEAD2CU
FTS:ET092SDU
FTS:ET092DDU
FTS:ET092SCU
FTS:ET092DCU
FTS:ET082SDU
FTS:ET082DDU
FTS:ET082SCU
FTS:ET082DCU
Product ID
Preinstalled (**)
Product name
Product ID
EOL
Component items
•
•
Model Upgrade
for DX90S2 (2.5inch,
single-controller type)
to DX440S2
FTS:ETEU94SC-L
N
N
N
N
N
N
Y
N
N
–
–
–
–
*1
Currently
Available
•
•
*1:
•
•
FTS:ETEU94SD-L
N
N
N
N
N
N
N
N
Y
–
–
–
–
*1
Currently
Available
•
•
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
3.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
•
*1:
QSFP cable between
Drive Enclosure
Upgrade license x 1
Additional parts that must be ordered:
• Cache memory for DX440 S2
•
•
•
Model Upgrade
for DX90S2 (3.5inch,
single-controller type)
to DX440S2
DX440 S2 controller enclosure (3U) x 1
- Controller x 2
- Power supply unit x 2
- Battery unit x 3
- Rack mount kit x 1
2.5" drive enclosure (2U) x 1
- I/O module x 2
- Power supply unit x 2
- Rack mount kit x 1
QSFP cable (1.1m) x 2
FTS:ETEC2Q1-L
N
N
N
N
N
N
N
Y: Supported
N: Not supported
–: Not applicable
** Y: Preinstalled at the factory (must be ordered with the DX80 S2/DX90 S2)
N
N
Y
Y
Y
Y
Currently
Available
Host interface for DX400 S2
QSFP cable between Drive Enclosure
Additional IOM
Firmware version V10L25 or later is required for an
ETERNUS DX Disk storage system.
•
QSFP cable (1.1m) x 2
•
Must be ordered when performing the model upgrade to
the DX410 S2/DX440 S2
N: Not preinstalled at the factory (packaged separately)
ETERNUS DX80 S2/DX90 S2 Disk storage system
Product List
P3AM-4852-10ENZ0
Date of issuance: December 2012
Issuance responsibility: FUJITSU LIMITED
• The content of this manual is subject to change without notice.
• This manual was prepared with the utmost attention to detail.
•
•
Copyright 2012 FUJITSU LIMITED
However, Fujitsu shall assume no responsibility for any operational
problems as the result of errors, omissions, or the use of information in
this manual.
Fujitsu assumes no liability for damages to third party copyrights or
other rights arising from the use of any information in this manual.
The content of this manual may not be reproduced or distributed in part
or in its entirety without prior permission from Fujitsu.