Tripp Lite SFP+ 10Gbase-CU Passive Twinax Copper Cable, Black, 7M (23-ft.)

SFP+ 10Gbase-CU Passive Twinax Copper Cable,
Black, 7M (23-ft.)
MODEL NUMBER: N280-07M-BK
Highlights
7 m. (23 ft.) Black 24AWG SFP+
High Speed Passive Copper
10Gbps Cable
Fully compliant to MSA
SFF-8431 specification
Equivalent to Cisco
SFP-H10GB-CU1-5M (See the
Support tab on this web page for
additional cross references)
Low Cost alternative to Fiber
Optic
Applications
10 Gigabit Ethernet and Gigabit
Ethernet
Fibre Channel: 1, 2, 4, and 8 GFC
Infiniband standard SDR
(2.5Gbps ), DDR ( 5Gbps ), and
Description
Tripp Lite's Small Form Factor Pluggable ( SFP+ ) passive copper cables are a high performance connectivity
solution supporting 10Gbps Ethernet and Fibre Channel applications. Constructed with 24AWG to 30AWG
(depending on length), 100ohm Twinaxial cable, Tripp Lite cables exceed the specs on most OEM cables, at a
QDR ( 10Gbps)
Fibre Channel over Ethernet
(FCoE)
fraction of the cost. SFP+ cables were developed as cost effective, low power alternatives to fiber optic cables, in
System Requirements
high speed interconnect applications, such as network storage and enterprise networking.
Tripp Lite SFP+ Direct Attach Cable (
DAC ) Twinaxial cables conform to
See "Features" tab for additional compatibility information
SFF-8431 standards, and as such can
be used with the following
Features
7 m. (23 ft.) Black 24Awg SFP+ High Speed Passive Copper 10Gbps Cable
manufacturers equipment that are
open to 3rd party cables:
Fully compliant to MSA SFF-8431 specification
Equivalent to Cisco SFP-H10GB-CU1-5M (See the Support tab on this web page for additional cross
QLOGIC * EMULEX * JUNIPER *
references)
ARISTA * IBM * DELL * EXTREME
Use in 10Gbps Ethernet and Fibre Channel applications
EMC * BROADCOM * FINISAR *
100ohm Twinaxial cable, Diecast metal shells, pull-to-release latching
VOLTAIRE * CISCO
Support for 1x, 2x, 4x and 8x Fiber Channel data rates
Hot-Pluggable SFP 20PIN footprint
CONFIRMED EQUIPMENT LIST (
Low power consumption
*ensure the latest firmware and
software is installed )
Specifications
CISCO NEXUS *
CISCO CATALYST *
CISCO CATALYST 3750x
OVERVIEW
CISCO CATALYST 2960
Model Type
SFP+
CISCO CATALYST 3500
1/2
CISCO CATALYST 3550
INPUT
CISCO NEXUS 5010
Cable Length (ft.)
23
ARISTA 70505-64
Cable Length (m)
7
QUANTA T3048
EXTREME X250E
JUNIPER EX3200
PHYSICAL
Color
Black
NOT COMPATIBLE TO 3RD PARTY
CABLES: HP and BROCADE
CONNECTIONS
Connector A
SFP+ (MALE)
Connector B
SFP+ (MALE)
Package Includes
7 m. (23 ft.) Black 24Awg SFP+
High Speed Passive Copper
10Gbps Cable
CERTIFICATIONS
Certifications
RoHS compliant
WARRANTY
Product Warranty Period
(Worldwide)
Lifetime limited warranty
© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
2/2