advertisement
Video | AutoDome 600 Series Analog PTZ Camera
AutoDome 600 Series Analog PTZ Camera
www.boschsecurity.com
u
Choice of 550 TVL 36x or 28x day/night cameras with 12x digital zoom and wide dynamic range u
Progressive scan provides smooth and clear images when viewing details in a moving image u
Sodium Vapor White Balance mode restores objects to their original color u
AutoTrack II automated motion tracking u
Advanced privacy masking
The AutoDome 600 Series is an easy to install PTZ camera that delivers superb video in all indoor and outdoor applications. The camera features day/night functionality for high quality images in low light conditions. This discrete, high-speed dome camera ensures reliable, uncompromised functionality in diverse environments across various applications.
AutoDome 600 Series highlights
The AutoDome delivers state-of-the-art technology and features that far exceed other PTZ cameras. The cameras achieve a high horizontal resolution of 550 TV lines enabling the reproduction of clear and detailed images.
Wide Dynamic Range
The AutoDome features Wide Dynamic Range (WDR) technology that allows for the capture of clear images from both bright and dark areas in the same frame.
WDR ensures that bright areas are not saturated and that dark areas are not too dark.
Progressive scan
The AutoDome camera is ideally suited for moving imaging applications. The progressive scan technology incorporated into the camera provides smooth and clear images when viewing images from a moving camera.
Sodium vapor lamp white balance
The AutoDome is an exceptional performer when shooting under a sodium vapor lamp (a street lamp or tunnel lamp, for example). Images under these conditions may have a yellowish tint, which may make identification difficult. In the Sodium Vapor White
Balance mode, the AutoDome automatically compensates for the light from a sodium vapor lamp to restore objects to their original color.
System Overview
The AutoDome 600 Series offers variable pan and tilt speeds, and the AutoPivot feature ensures optimal camera control and viewing at all zoom levels. These high-performance zoom autofocus cameras incorporate the latest digital imaging technology with excellent sensitivity and resolution. With 99 userdefined presets as well as tour and AutoPan modes,
The AutoDome 600 Series is not small on features.
The AutoDome 600 Series adds real intelligence to your video surveillance applications. Equipped with
AutoTrack II, Bosch’s award-winning motion tracking software, built-in image stabilization, motion detection, and a sophisticated alarm handling “rules”
2 | AutoDome 600 Series Analog PTZ Camera engine, the AutoDome 600 Series incorporates advanced, intelligent video features unmatched by any other camera system.
The AutoDome 600 Series supports standard and optional video and data transmission methods, including Bilinx (over coax and UTP) and fiber optic.
Remote control, configuration, and firmware updates can also be performed over these cables, offering you unparalleled control of your cameras. Cable compensation provides extended coaxial and UTP distance runs while preventing the image quality degradation caused by signal losses from long cable lengths.
Functions
The following are some of the features that make the
AutoDome 600 Series the most flexible PTZ dome camera systems in the security industry.
High-performance PTZ day/night cameras
Image control and quality are integral aspects of any
PTZ dome camera, and the AutoDome delivers. The
AutoDome 600 Series camera has a 1/4-in. CCD sensor, with 4CIF/D1 resolution and sensitivity to below 1.0 lux and is available with a choice of 28x and the industry-leading 36x optical zoom lens, and all 600
Series systems offer a full 12x digital zoom.
Both camera options provide 550 TVL of horizontal resolution for outstanding clarity and image detail. The cameras also incorporate technology that dramatically improves the dynamic range by 128 times. Also known as WDR (wide-dynamic range), it results in clear image reproduction in extreme high-contrast environments.
The AutoScaling (proportional zoom) and AutoPivot
(automatically rotates and flips the camera) features ensure optimal control.
Day/night capabilities and outstanding sensitivity make
AutoDome 600 Series cameras exceptional performers in all lighting conditions. In low light, these cameras automatically switch from color to monochrome by removing the IR filter to boost the infrared illumination sensitivity, while maintaining superior image quality.
For operation in the darkest conditions, the SensUp control feature automatically reduces the shutter speed to as little as one second. This increases sensitivity by more than 50 times.
Accurate control and positioning
With super-quick, 360° per-second pan and 100° persecond tilt speeds; the AutoDome 600 Series outperforms other domes in its class. The 600 Series supports 99 pre-positions and two styles of Guard
Tours: Preset and Record/Playback. The preset tour has capability for up to 99 pre-positions with a configurable dwell time between pre-positions, and can be customized as to the order and frequency each preset is visited. The AutoDome 600 Series also provides support for two recorded tours, which have a combined duration of 15 minutes of movements.
These are recorded macros of an operator’s movements, including pan, tilt, and zoom activities, and can be played back in a continuous manner.
Supported menu languages include: English, Czech,
Dutch, French, German, Italian, Polish, Portuguese,
Russian and Spanish.
AutoTrack II
Bosch introduced the industry’s first automated motion tracking system, and now we’ve made this award-winning technology even better. The AutoDome
600 Series contains an advanced DSP that provides real-time video processing for incredibly smooth object tracking.
AutoTrack II utilizes Bosch’s unique “virtual masking” technology. These “invisible” masks are created to act just like privacy masks, except that only the AutoTrack can see them – and it knows to ignore any motion behind them. This enables the AutoTrack to ignore extraneous background motion, such as a tree blowing in the wind, making it ideal for both indoor and outdoor applications.
Video motion detection (VMD)
With AutoDome, you can create a “region of interest” within a preset position where motion is to be detected. The AutoDome 600 Series supports a total of 10 individual regions of interest (one per preposition). VMD also takes advantage of virtual masking to ignore areas of unwanted motion.
Image stabilization
As PTZ cameras continue to improve their optical zoom capabilities, image stabilization becomes critical to eliminate movement caused by unstable camera mounts. A mere quarter-inch of movement of the camera mount can shift the field of view by more than
20 feet when the camera is zoomed to a high value.
This can render images unusable.
Image stabilization algorithms included with the
AutoDome 600 Series reduces camera shake in both the vertical and horizontal axis, resulting in exceptional image clarity (pixel displacement up to +/-
10% for frequencies up to 10 Hz). Bosch’s unique image stabilization solution does not reduce camera sensitivity, unlike competitive systems.
Alarm management
The AutoDome 600 Series takes alarm handling to new levels of flexibility and power.
Inputs and outputs
The AutoDome 600 Series can handle seven alarm inputs, two of which are analog inputs that can be programmed for EOLR (End-of-Line Resistor) supervision whenever true security applications require it. These inputs enable the dome to “sense” if the contact is opened or closed and whether the wire has been tampered with (either by being cut or shorted). In addition, the AutoDome 600 Series supports four outputs: one relay rated at two amps
3 | AutoDome 600 Series Analog PTZ Camera and three additional open collectors for driving external devices. Each can be programmed individually.
Advanced alarm control
The AutoDome 600 advanced alarm control uses sophisticated rules-based logic to determine how to manage alarms. In its most basic form, a “rule” could define which input(s) should activate which output(s).
In a more complex form, inputs and outputs can be combined with pre-defined or user-specified keyboard commands to perform advanced dome functions.
There is virtually no limit to the number of combinations that you can program, making the standard software in the dome ready for any application.
Superior privacy masking
The AutoDome 600 Series allows for a total of 24 individual privacy masks, with up to eight displayed in the same scene. Unlike conventional privacy masks, these can each be programmed with three, four, or even five corners to cover more complex shapes. Each mask changes size and shape smoothly and quickly – ensuring that the covered object cannot be seen. You also have a choice of colors: black, white, and blurred.
Blurred comes in handy when privacy is an issue, but determining the presence of motion is still required.
Fiber Optic Kit
The VGA-FIBER-AN (multimode) is an analog, fiber optic conversion kit for use with 100 and 600 Series
AutoDomes. This module is a video transmitter/data receiver modules designed to be mounted directly into an AutoDome power supply box.
Ease of installation and servicing
The AutoDome 600 Series has been designed for quick and easy installation; a key feature from Bosch CCTV products. All housings feature recessed screws and latches for increased tamper resistance.
AutoDome in-ceiling housings provide IP54 protection
(with an optional kit) and are rated IK 8 (IEC 62262).
These housings feature an impact-resistant polycarbonate rugged bubble to protect your camera from vandalism. The rugged bubble can withstand impacts equivalent to a 4.5 kg (10 lb) weight dropped from a height of 3 m (10 ft).
AutoDome pendant housings (indoor and outdoor) are rated to provide IP 66 protection and come fully assembled with a sunshield and ready for wall or pipe applications with the proper mounting hardware
(purchased separately). In addition, the pendant housing comes equipped with a low-impact, highresolution acrylic bubble for enhanced image clarity.
Outdoor Pendant housings provide an operating temperature range down to -40°C (-40°F). The optional
“XT” extreme temperature kit allows an AutoDome to operate in temperatures down to -60°C (-76°F), ensuring reliable operation in even the harshest environments.
Note: Bosch offers a full complement of hardware and accessories (as a separate purchase) for corner, mast, roof, pipe, and in-ceiling applications, which allow the
AutoDome to be easily adapted to individual site requirements.
Easy upgrades
Bosch’s innovative software, the Configuration Tool for
Imaging Devices (CTFID), allows operators or technicians to control the PTZ, change camera settings, and even update firmware from virtually anywhere without need for additional wiring.
The AutoDome 600 Series has advanced built-in diagnostics to simplify service and minimize downtime. Using the On Screen Display (OSD), a technician can quickly and easily check critical parameters (such as internal temperature and input voltage level) to verify that the dome is functioning within acceptable operating limits. If video is not present, a local inspection of three diagnostic LEDs at the camera site can identify the presence of video and control data.
Certifications and Approvals
Electromagnetic
Compatibility (EMC)
Product Safety
Environmental
Impact Resistance
Complies with FCC Part 15, ICES-003, and CE regulations, including EN50130-4 and
EN50121-4
Complies with CE regulations, UL, CSA, EN, and IEC Standards
In-ceiling: IP54 (with optional VGA-IP54K-IC kit), Plenum rated
Pendant: IP66
In-ceiling: IK 8
1
1
1
1
Parts Included
In-ceiling
Fully-assembled in-ceiling housing
Polycarbonate bubble, clear or tinted
Interface box
Coaxial cable with ferrite
Indoor Pendant
1
1
1
Fully-assembled indoor pendant housing
Acrylic bubble, clear
Coaxial cable with ferrite
Outdoor Pendant
1
1
Fully-assembled outdoor pendant housing with sunshield
Acrylic bubble, clear
1
Note:
Coaxial cable with ferrite
4 | AutoDome 600 Series Analog PTZ Camera
1. Mounting hardware and accessories are available separately.
2. The coaxial cable with ferrite is required for pendant arm and in-ceiling mount applications. Do note use the coaxial cable with ferrite for pipe or roof mount applications.
Technical Specifications
Camera 36x Day/Night
Imager
Effective Picture Elements
Lens
1/4 in.-type Exview HAD CCD
(progressive scan)
PAL: Approx. 440,000; 752(H) x
582(V)
NTSC: Approx. 380,000; 768 (H) x
494 (V)
36x Zoom (3.4–122.4 mm)
F1.6 to F4.5
NTSC
4.0 sec.
PAL
4.0 sec.
Zoom Movement Speed
• Optical WIDE /
Optical TELE –
Focus Tracking ON
• Optical WIDE /
Optical TELE –
Focus Tracking OFF
• Optical WIDE /
Digital TELE
• Digital WIDE / Digital
TELE
Focus
Iris
Field of View
Video Output
Gain Control
Aperture Correction
Digital Zoom
Horizontal Resolution
Synchronization
Sensitivity (typical) 1
Day Mode
SensUp Off
SensUp On
(NTSC: 1/4s, 15X; PAL
1/3s, 16.7X)
Night Mode
SensUp Off
2.7 sec.
6.0 sec.
2.1 sec.
0.104 lux 0.209 lux
2.7 sec.
6.2 sec.
2.3 sec.
Automatic with manual override
Automatic with manual override
1.7° to 57.8°
1.0 Vp-p, 75 Ohm
Auto/Manual/Max.
(–3 dB to 28 dB, 2 dB steps)
Horizontal and vertical
12x
550 TVL (NTSC, PAL) typical
Line-Lock (–120° to 120° vertical phase adjust) or internal crystal
30 IRE 50 IRE
0.66 lux
0.04 lux
1.4 lux
0.1 lux
SensUp On
(NTSC: 1/4s, 15X; PAL
1/3s, 16.7X)
Electronic Shutter Speed
Wide Dynamic Range
(WDR)
0.0052 lux 0.0103 lux
1/1 to 1/10,000 sec., 22 steps
92 dB (50 dB with WDR Off)
Signal-to-Noise Ratio (SNR) >50 dB
White Balance 2000 K to 10,000 K
1. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission).
Camera 28x Day/Night
Imager
Effective Picture Elements
Lens
1/4 in.-type Exview HAD CCD
(progressive scan)
NTSC: 380,000
PAL: 440,000
28x Zoom (3.5–98.0 mm)
F1.35 to F3.7
NTSC
2.5 sec.
PAL
2.5 sec
Zoom Movement Speed
• Optical WIDE / Optical
TELE – Focus Tracking
ON
• Optical WIDE / Optical
TELE – Focus Tracking
OFF
• Optical WIDE / Digital
TELE – Focus Tracking
ON
• Optical WIDE / Digital
TELE – Focus Tracking
OFF
• Digital WIDE / Digital
TELE
Focus
Iris
Field of View
Video Output
Gain Control
Aperture Correction
Digital Zoom
Horizontal Resolution
Synchronization
Sensitivity (typical) 2
Day Mode
1.7 sec.
4.5 sec.
1.7 sec.
2.0 sec.
1.7 sec.
4.9 sec.
1.7 sec.
2.5 sec.
Automatic with manual override
Automatic with manual override
2.1° to 55.8°
1.0 Vp-p, 75 Ohm
Auto/Manual/Max.
(–3 dB to 28 dB, 2 dB steps)
Horizontal and vertical
12x
550 TVL
Line-Lock (–120° to 120° vertical phase adjust) or internal crystal
30 IRE 50 IRE
5 | AutoDome 600 Series Analog PTZ Camera
SensUp Off
SensUp On
(NTSC: 1/4s, 15X; PAL 1/3s,
16.7X)
Night Mode
SensUp Off
SensUp On
(NTSC: 1/4s, 15X; PAL 1/3s,
16.7X)
Electronic Shutter Speed
Wide Dynamic Range (WDR)
Signal-to-Noise Ratio (SNR)
White Balance
0.33
lux
0.02
lux
0.066
lux
0.0026
lux
0.66 lux
0.04 lux
0.166 lux
0.0082 lux
1/1 to 1/10,000 sec., 22 steps
92 dB (50 dB with WDR Off)
>50 dB
2000 K to 10,000 K
2. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission).
Mechanical
Pan Range
Tilt Angle
In-Ceiling Indoor
Pendant
360° cont.
360° cont.
1° above horizon
18° above horizon
0.1°/s-120°/s 0.1°/s-120°/s Variable
Speed
Pre-position
Speed
Preset
Accuracy
Pan: 360°/s
Tilt: 100°/s
± 0.1° typ.
Pan: 360°/s
Tilt: 100°/s
± 0.1° typ.
Electrical
In-Ceiling
Input Voltage 21-30 VAC
50/60 Hz
15 W / 27 VA Power
Consumption
(typical)
3. Add 16 W if using VG4-SHTR-XT kit.
Indoor
Pendant
21-30 VAC
50/60 Hz
15 W / 27 VA
Outdoor
Pendant
360° cont.
18° above horizon
0.1°/s-120°/s
Pan: 360°/s
Tilt: 100°/s
± 0.1° typ.
Outdoor
Pendant
21-30 VAC
50/60 Hz
51 W / 55 VA 3
Surge Suppression
Protection on
Video
Protection on
Biphase
Protection on
RS-232/485
Peak current 10 kA (Gas Tube Arrester)
Peak current 10 A, peak power 300 W (8/20 μs)
ESD protection ±15 KV human body model
Protection on
Alarm Inputs
Protection on
Alarm Outputs
Protection on
Relay Outputs
Protection on
Power Input
(Dome)
Protection on
Power
Output (Arm
Power Supply)
Peak current 17 A, peak power 300 W (8/20 μs)
Peak current 2 A, peak power 300 W (8/20 μs)
Peak current 7.3 A, peak power 600 W
(10/1000 μs)
Peak current 7.3 A, peak power 600 W
(10/1000 μs)
Peak current 21.4 A, peak power 1500 W
(10/1000 μs)
Fiber Optic Kits
VGA-FIBER-AN
Description
Compatible
Receiver
Optical Fiber
Compatibility
Max. Distance
Optical Budget
Connector
Wavelength
(video/data)
Multimode Fiber Optic Module
LTC 4629 Series
50/125 µm, 62.5/125 µm, low loss multimode glass fiber, rated for a minimum system bandwidth of 20 MHz
4.0 km (2.5 miles)
14 dB
One (1) ST connector
850 nm / 1310 nm
Miscellaneous
Sectors/Titling
Masking
Pre-positions
Camera Setup/
Control
Communicatio ns Protocols
Guard Tours
16 independent sectors with 20-character titles/ sector
24 individually configurable privacy masks
99, each with 20-character titles
Biphase, RS-232, RS-485, Bilinx (coax)
Biphase, Bilinx, Pelco P, and Pelco D
Supported
Languages
Two (2) types of tours:
• Recorded tours – two (2), total duration
15 minutes
• Preset tour – one (1), consisting of up to 99 scenes, consecutively and (1) customized up to 99 scenes
English, Czech, Dutch, French, German, Italian,
Polish, Portuguese, Russian and Spanish
Cable Compensation
Max Distance
RG-59/U
RG-6/U
With Pre-comp OFF
1000 ft (300 m)
1500 ft (450 m)
With Pre-comp ON
2000 ft (600 m)
3000 ft (900 m)
6 | AutoDome 600 Series Analog PTZ Camera
RG-11/U
Cat 5/UTP
(Passive receiver)
User Connections
Power, Camera
Power, Heater
Control Data
Video
Audio Line In
EOLR Alarm Inputs (2)
2000 ft (600 m)
750 ft (225 m)
4000 ft (1200 m)
1500 ft (450 m)
21-30 VAC, 50/60 Hz
21-30 VAC, 50/60 Hz
Biphase ±
RS-232 RX/TX or RS-485 ± - optional control data (dip switch selectable)
BNC/UTP
9 K Ohm typ, 5.5 Vp-p max
Alarm Inputs (5)
Relay Out (1)
Open Collector Outputs
(3)
Programmable for
“normally open”, “normally closed”,
“normally open-supervised”, “normally closed-supervised”
Programmable for
“normally open” or “normally closed”
Dry contact output rating:
2 A @ 30 VAC
32 VDC@150 ma max.
Environmental
Design
Rating
Operatin g Temp.
In-Ceiling
IP54, 4
Plenum rated
–10°C to 40°C
(14°F to
104°F)
Indoor Pendant
IP66 5
–10°C to 40°C
(14°F to
104°F)
–40°C to 60°C
(–40°F to
140°F)
0% to 90% relative, noncondensing
Outdoor Pendant
IP66 5
–40°C to 50°C
(–40°F to 122°F) with XT kit:
–60°C to 50°C
(–76°F to 122°F)
–40°C to 60°C
(–40°F to 140°F)
Storage
Temp.
Humidity
–40°C to 60°C
(–40°F to
140°F)
0% to 90% relative, noncondensing
0% to 100% relative, condensing
4. With optional VGA-IP54K-IC kit.
5. Meets requirements for NEMA 4X certification with use of a polycarbonate bubble. Meets requirements for NEMA 4X, except impact test, with use of an acrylic bubble.
Construction
Dimensions
Weight
• In-ceiling
• Indoor Pendant
See dimensional drawings
2.66 kg (5.86 lb)
2.88 kg (6.3 lb)
• Outdoor
Pendant
Bubble Size
Construction Material
• Housing
• Bubble
Color
Standard Finish
3.32 kg (7.3 lb)
Mounts/Accessories
Bubbles
In-ceiling
Clear rugged polycarbonate
Tinted rugged polycarbonate
Pendant
Clear rugged polycarbonate
Tinted rugged polycarbonate
Clear high-resolution acrylic
Tinted high-resolution acrylic
153.1 mm diameter (6.03 in.)
Cast aluminum
Pendant: Acrylic (high-resolution)
In-ceiling: Polycarbonate (rugged)
White (RAL 9003)
Powder coated, sand finish
VGA-BUBBLE-CCLR
VGA-BUBBLE-CTIR
VGA-BUBBLE-PCLR
VGA-BUBBLE-PTIR
VGA-BUBBLE-PCLA
VGA-BUBBLE-PTIA
Pendant Arm Mounts
Wall Arm (No Transformer)
Wall Arm (120/230 VAC Transformer)
VG4-A-PA0
VG4-A-PA1 /
VG4-A-PA2
VGA-PEND-ARM
VGA-PEND-WPLATE
VG4-A-TSKIRT
Pendant Arm with Wiring
Mounting plate for VGA-PEND-ARM
Trim skirt for AutoDome Series Power
Supplies
Optional Mounting Plates for Arm Mounts
Corner Mounting Plate
Mast (Pole) Mounting Plate
Pendant Pipe Mounts
Pipe Mount Cap
Pendant Roof Mounts
Roof (Parapet) Mount
(VG4-A-9543 Pipe Mount Cap required. Available separately.)
Optional Mounting Plates for Roof Mounts
Flat Roof Adapter for Parapet Mount
In-ceiling Support Kits
Bracket for suspended or drop ceilings
Gasket kit for IP54 certification
VG4-A-9542
VG4-A-9541
VG4-A-9543
VGA-ROOF-MOUNT
LTC 9230/01
VGA-IC-SP
VGA-IP54K-IC
7 | AutoDome 600 Series Analog PTZ Camera
Power Supplies
Outdoor Power Supply Box, no transformer
Outdoor Power Supply Box
(120/230 VAC Transformer)
Extended temp heater module extends temperature range to – 60°C (–76°F) for outdoor pendants only
Fiber Optic Kit
VG4-A-PSU0
VG4-A-PSU1 /
VG4-A-PSU2
VG4-SHTR-XT
VGA-FIBER-AN
8 | AutoDome 600 Series Analog PTZ Camera
Dimensions: Indoor AutoDomes
469.1
18.47
201.2
7.92
216.4
8.52
1
188.0
7.40
374.8
14.75
2
460.1
18.12
R
76.6
3.01
216.4
8.52
169.5
6.67
1a
366.4
14.43
22.6
0.90
86.7
3.42
76.6
3.01
R
4
299.4
11.79
88.9
3.50
188.9
7.44
76.6
3.01
R
10.2
0.40
88.9
3.50
Indoor System Dimensions
3a
4
2a
3
5
6
1a
2
Reference
1
Description
Wall Mount – Side with power supply
Wall/Mast Mount – Side with VGA-PEND-WPLATE
Wall Mount – Front with power supply and trim skirt
Wall Mount – Front with power supply
Wall Mount – Back with power supply and trim skirt
Wall Mount – Back with power supply
Pipe Mount
In-ceiling Mount – Front
In-ceiling Mount – Side
5
204.3
8.04
2a
1.90
0.75
201.8
7.94
77.0
3.03
R
94.1
3.70
134.6
5.30
11.0
0.43
3
134.6
5.30
3a
176.0
6.93
6
(4) 11.0
0.43
mm in.
160.0
6.30
184.0
7.25
160.0
6.30
185.7
7.31
9 | AutoDome 600 Series Analog PTZ Camera
Dimensions: Outdoor AutoDomes
549.6
21.64
235.8
9.28
1
188.0
7.40
2
224.0
8.82
477.6
18.80
216.4
8.52
169.5
6.67
1a
76.6
3.01
R
374.8
14.75
134.6
5.30
3
134.6
5.30
3a
160.0
6.30
160.0
6.30
86.7
3.42
184.0
7.25
4
224.0
8.82
22.9
0.90
299.4
11.79
224.0
8.82
58
2.3
5
2a
366.4
14.43
175
6.9
76.6
3.01
R
193
7.6
7
152.4
6.0
69.9
2.75
133.4
5.25
178
7.0
38
1.5
133.4
5.25
6
203
8.0
236
9.3
346.2
13.63
101.6 Typ.
4.0
10.4
8 x 0.41
219.1
8.63 mm in.
114.3
4.50 Typ.
228.6
9.0
279.4
11.0
Outdoor System Dimensions
3
3a
4
1a
2
2a
Reference
1
Description
Wall Mount – Side with power supply and trim skirt
Wall/Mast Mount – Side with VGA-PEND-WPLATE
Wall Mount – Front with power supply and trim skirt
Wall Mount – Front with power supply
Wall Mount – Back with power supply and trim skirt
Wall Mount – Back with power supply
Pipe Mount
1-1/2 NPT
616
24.25
976.1
38.43
1022.4
40.25
7
8
5
6
9
88.1
3.47
185.7
7.31
8
Ø 10.4
0.41
279.4
11.00
6.35 Typ.
0.25
111 Typ.
4.37
16.0 Typ.
0.63
254
10.00
1190.8
46.88
378
14.88
9 11.0
04.3
6.35
0.25
170.0
6.69
134.6
5.30
216.4
8.52
160.0
6.30
50.8
2.00
105.0
4.13
Mast Mount
Corner Mount
Roof Mount
Roof Mount Adapter
Power Supply for Pipe and Roof Mounts
10 | AutoDome 600 Series Analog PTZ Camera
Ordering Information
VG5-613-CCS AutoDome 600 Series 28x PAL In-ceiling
Camera
Analog 28x PAL camera, in-ceiling housing with a clear polycarbonate bubble
Order number VG5-613-CCS
VG5-623-CTS AutoDome 600 Series 28x NTSC In-ceiling
Camera
Analog 28x NTSC camera, in-ceiling housing with a tinted polycarbonate bubble
Order number VG5-623-CTS
VG5-613-ECS AutoDome 600 Series 28x PAL Outdoor
Pendant Camera
Analog 28x PAL camera, outdoor pendant housing with a clear acrylic bubble
Order number VG5-613-ECS
VG5-613-PCS AutoDome 600 Series 28x PAL Indoor
Pendant Camera
Analog 28x PAL camera, indoor pendant housing with a clear acrylic bubble
Order number VG5-613-PCS
VG5-614-ECS AutoDome 600 Series 36x PAL Outdoor
Pendant Camera
Analog 36x PAL camera, outdoor pendant housing with a clear acrylic bubble
Order number VG5-614-ECS
VG5-614-PCS AutoDome 600 Series 36x PAL Indoor
Pendant Camera
Analog 36x PAL camera, indoor pendant housing with a clear acrylic bubble
Order number VG5-614-PCS
VG5-623-ECS AutoDome 600 Series 28x NTSC Outdoor
Pendant Camera
Analog 28x NTSC camera, outdoor pendant housing with a clear acrylic bubble
Order number VG5-623-ECS
VG5-623-PCS AutoDome 600 Series 28x NTSC Indoor
Pendant Camera
Analog 28x NTSC camera, indoor pendant housing with a clear acrylic bubble
Order number VG5-623-PCS
VG5-624-ECS AutoDome 600 Series 36x NTSC Outdoor
Pendant Camera
Analog 36x NTSC camera, outdoor pendant housing with a clear acrylic bubble
Order number VG5-624-ECS
VG5-624-PCS AutoDome 600 Series 36x NTSC Indoor
Pendant Camera
Analog 36x NTSC camera, indoor pendant housing with a clear acrylic bubble
Order number VG5-624-PCS
Accessories
VG4-A-PA0 Pendant Arm Mount
Pendant arm mount with power supply box for a
AutoDome Series cameras, no transformer, white
Order number VG4-A-PA0
VG4-A-PA1 Pendant Arm Mount with 120 VAC Transformer
Pendant arm mount with power supply box for
AutoDome Series cameras with a 120 VAC transformer, white
Order number VG4-A-PA1
VG4-A-PA2 Pendant Arm Mount with 230 VAC Transformer
Pendant arm mount with power supply box for
AutoDome Series cameras with a 230 VAC transformer, white
Order number VG4-A-PA2
VGA-PEND-ARM Pendant Arm with Wiring
Compatible with an AutoDome Series pendant housing
Order number VGA-PEND-ARM
VGA-PEND-WPLATE Mounting Plate
Mounting plate for VGA-PEND-ARM, compatible with an AutoDome Series camera
Order number VGA-PEND-WPLATE
VGA-ROOF-MOUNT Roof Mount
Roof parapet mount, white
(VG4-A-9543 Pipe Mount Cap required. Available separately.)
Order number VGA-ROOF-MOUNT
LTC 9230/01 Flat Roof Mount Adapter
For mounting a unit in an upright position on a flat surface for roof parapet mount VGA-ROOF-MOUNT
Order number LTC 9230/01
VG4-A-9541 Pole Mount Adapter
Pole mount adapter for a for an AutoDome Series pendant arm or a VEI-30 or NEI-30 Dinion Infrared
Imager, designed for poles with a diameter of
100‑380 mm (4‑15 in.), white
Order number VG4-A-9541
VG4-A-9542 Corner Mount Adapter
Corner mount adapter for an AutoDome Series pendant arm or a VEI-30 or NEI-30 Dinion Infrared
Imager
Order number VG4-A-9542
VG4-A-9543 Pipe Mount
Pipe mount, white, for an AutoDome Series pendant housing
Order number VG4-A-9543
11 | AutoDome 600 Series Analog PTZ Camera
VGA-IP54K-IC IP54 In-ceiling Gasket Kit for AutoDome
100/600 Series
Gasket kit for AutoDome 100 and 600 Series
AutoDome In-ceiling mounts required for IP54 environmental rating
Order number VGA-IP54K-IC
VGA-IC-SP In-ceiling Support Kit for AutoDome 100/600
Series
Suspended ceiling support kit for AutoDome 100 and
600 Series AutoDome In-ceiling mounts
Order number VGA-IC-SP
VG4-A-PSU0 24 VAC Power Supply Unit
24 VAC, 100 W, NEMA-rated, white, for an AutoDome
Series camera
Order number VG4-A-PSU0
VG4-A-PSU1 120 VAC Power Supply Unit
120 VAC, 100 W, NEMA-rated, white, for an AutoDome
Series camera
Order number VG4-A-PSU1
VG4-A-PSU2 230 VAC Power Supply Unit
230 VAC, 100 W, NEMA-rated, white, for an AutoDome
Series camera
Order number VG4-A-PSU2
VGA-SBOX-COVER Cover for AutoDome Power Supply
Boxes
Order number VGA-SBOX-COVER
VGA-FIBER-AN Analog Multimode Fiber Optic Kit
Analog multimode video transmitter/data receiver fiber optic kit
Order number VGA-FIBER-AN
VG4-A-TSKIRT Trim Skirt for AutoDome Power Supply
Boxes
Trim skirt for the following AutoDome Series power supply boxes:
VG4-A-PSU0F, VG4-A-PSU1, VG4-A-PSU1F, VG4-A-
PSU2, VG4-A-PSU2F,
VG4-SBOX-24VAC, VG4-SBOX-120VAC, and VG4-
SBOX-230VAC
Order number VG4-A-TSKIRT
VG4-SHTR-XT Heating Module
Extended temperature heater module extends temperature range to –60°C (–76°F) for EnviroDomes and AutoDome 600 Series Outdoor Pendants only
Order number VG4-SHTR-XT
VGA-BUBBLE-CCLR Clear Rugged Bubble for an In-ceiling Housing
Impact resistant polycarbonate bubble
Order number VGA-BUBBLE-CCLR
VGA-BUBBLE-CTIR Tinted Rugged Bubble for an In-ceiling Housing
Impact resistant polycarbonate bubble
Order number VGA-BUBBLE-CTIR
VGA-BUBBLE-PCLR Clear Rugged Bubble for a Pendant
Housing
Impact resistant polycarbonate bubble
Order number VGA-BUBBLE-PCLR
VGA-BUBBLE-PTIR Tinted Rugged Bubble for a Pendant
Housing
Impact resistant polycarbonate bubble
Order number VGA-BUBBLE-PTIR
VGA-BUBBLE-PCLA Clear High-resolution Bubble for a
Pendant Housing
Low-impact acrylic bubble
Order number VGA-BUBBLE-PCLA
VGA-BUBBLE-PTIA Tinted High-resolution Bubble for a
Pendant Housing
Low-impact acrylic bubble
Order number VGA-BUBBLE-PTIA
VG4-MTRN-C Alternative Protocol Communications
Module
Supports the American Dynamics (AD) Manchester and the American Dynamics (AD) Sensormatic RS-422 protocols.
Order number VG4-MTRN-C
Software Options
VP-CFGSFT Configuration Tool for Imaging Devices
Camera configuration software for use with Bilinx cameras
Order number VP-CFGSFT
12 | AutoDome 600 Series Analog PTZ Camera
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180 [email protected]
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330 [email protected]
www.boschsecurity.com
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699 [email protected]
www.boschsecurity.asia
© Bosch Security Systems 2012 | Data subject to change without notice
2474955659 | en, V13, 11. Jun 2012
China:
Bosch (Shanghai) Security Systems Ltd.
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone +86 21 22181111
Fax: +86 21 22182398 www.boschsecurity.com.cn
America Latina:
Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: +55 19 2103 2860
Fax: +55 19 2103 2862 [email protected]
www.boschsecurity.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Outdoor CCTV security camera
- CCD 25.4 / 4 mm (1 / 4")
- Wired
- Night vision
- Optical zoom: 28x Digital zoom: 12x
- Dome
- IP66
- White
- 3.32 kg