advertisement
PRIMECENTER M1 Racks
16U/24U/42U
System configurator and order-information guide
April 2013
Contents
Configurator diagram
Configuration and order process informations
Rack configurations
Rack mounting ex factory
Rack accessories
Rack console
KVM switches
Power socket outlets
Uninterruptible power supplies
Backup Device FibreCAT TXF
10 GbE Twinax-Cabling
IB Switch
IB Cabling
VDX 6720
Data Sheet Smart UPS
General rack accessories
Change Report
PRIMERGY Server
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
Configuration and order process informations
This document contains technical background information for the installation of servers and components into the new PRIMECENTER M1 Racks.
Please use the latest version of System-Architect for configuration.
The System-Architect, a configuration tool with graphical user interface, enables you to gain an overview over the required configuration even while planning the system.
A simultaneous examination of consistence ensures completeness and functionality of the required system.
For the latest tools please go to: http://extranet.fujitsu-siemens.com/fsc/products/configuration/main-e.htm
Further information in the internet see: http://manuals.ts.fujitsu.com/file/10276/pcrm1-um-en.pdf
(internet) http://ts.fujitsu.com/products/standard_servers/rack_technology/index.html
(internet) https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx
With your rack order, please absolutely send the Rack-Architect picture and the filled-in cable plan.
Additionally to each rack-order the rack-check list has to be filled in, see:
http://configurator.ts.fujitsu.com/public/information/Rack-Checkliste.xls
Please send your desired configuration from the rack architekt and the form sheet for external connections and hard disk configurations with the respective order numbers additionally to your order in SAP.
You can e-mail it to the following address (.xls or .sar):
To: Fujitsu Technology Solutions GmbH
CL OM Zentral Functions
Konfig-Team
(extranet)
Tel no.
e-mail:
+49 (0) 821 / 804-3362 [email protected]
Rack assembly at customer site:
The 16U, 24U and 42 new PRIMECENTER M1 racks will be delivered fully equipped if the service "rackmounting ex factory" (SNP:SY-F1647E301-P) was ordered for each server and subsystem.
The on-site service has to be requested for power installation in racks for server installation at the customers site. This service is not included in the price of the rack.
Fujitsu Technology Solutions x86 PRIMERGY Server 2 von 24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
Rack-configurations with systems in asymmetrical PCR M1 - 700mm x 1050mm
S26361-K827-V120
Fujitsu PCR M1 724 A
(PRIMECENTER Rack M1 24U)
Basic cabinet (1,203mm) according to protection type IP20 with side panels, front- and twin back-door lockable.
Asymmetrical large basic cabinet with 740mm post distance.
Mounting frame 2x 2U vertical.
Outlets for external cabling, cable outlets to below, and one rear door.
Addition of several racks without accessory, no personal variation.
Basic rack without power connection; refer to part H/I for further informations and order numbers (connection concepts).
HxWxD = 1203 x 700 x 1050 mm including:
- installation preparation
- packing/shock-pallet
- accessory pack including:
Accessory pack with various installation material
Manual German / English
S26361-K827-V140
Fujitsu PCR M1 742 A
(PRIMECENTER Rack M1 42 U)
Basic cabinet (2,003 mm) according to protection type IP20 with side panels, front- and twin back-door lockable.
Asymmetrical large basic cabinet with 740mm post distance.
Mounting frame 3x 2U vertical.
Outlets for external cabling, cable outlets to the top, below, and one rear door.
Addition of several racks without accessory, no personal variation.
Basic rack without power connection; refer to part H/I for further informations and order numbers (connection concepts).
HxWxD = 2003 x 700 x 1050 mm including:
- installation preparation
- packing/shock pallet
- accessory pack including:
Accessory pack with various installation material
Manual German / English
Front mounting frame left - asymmetrical.
This mounting frame allows vertical installation of
19'' components; e.g. 6x1U in 42U or 4x1U in 24U with a depth less than 300 mm incl. cabling and less 3.5kg per height unit.
For sideward mounting you can use e.g.
console switches, rack management systems etc.
Mounting brackets must come with the components.
Free space has to be filled with dummy panels.
Rack Options PCR M1 - S26361-…
...F4530-L210 Tilting Protection Pull Out PCR M1
Must be ordered with the rack if teleskopic rails are used!
No mounting ex factory - loose delivery!
...-F4530-L250 Brush Panel Kit (2pcs) Top Cover
PCR M1 42U (release in 08/2011)
...-F4530-L260 Brush Panel Kit Rear Door PCR M1
(release in 09/2011)
...-F4530-L6 Earthing Kit PCR M1
...-F4530-L131 Dummy panel 1U plast. Bk
...-F4530-L132 Dummy panel 2U plast. Bk
Rack Options PCR M1 - Support Brackets
For horizontal mounting of 19-inch rack systems, an asymmetrical rack requires support brackets
(depending on weight and height of mounted system)
to compensate the asymmetric post.
Please have a look to system configurator.
Rack Options PCR M1 - S26361-
Other rack options used for PRIMECENTER S2 racks also, please look to sektion B "Accessories"
To avoid order problems, please send along the picture of the system-architect.
A
Mounting lateral CM S26361-F2735-E7/L7 not possible in high unit 16, 24 or 42
Highest start position for 2U systems:
HU14, 22 or 40 in asymmetrical racks.
Fujitsu Technology Solutions x86 PRIMERGY Server 3 von 24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
Rack-configurations with systems in symmetrical PCR M1 - 700mm x 1050mm
S26361-K827-V220
Fujitsu PCR M1 724 S
(PRIMECENTER Rack M1 24U)
Basic cabinet (1,203mm) according to protection type IP20 with side panels, front- and twin back-door lockable.
Symmetrical large basic cabinet with 740mm post distance.
2 vertical mounting frames 19" 1U,
1 each left/right from horiz. 19" area.
Outlets for external cabling, cable outlet to below, and one rear door.
Addition of several racks without accessory, no personal variation.
Basic rack without power connection; refer to part H/I for further informations and order numbers (connection concepts).
HxWxD = 1203 x 700 x 1050 mm including:
- installation preparation
- packing/shock-pallet
- accessory pack including:
Accessory pack with various installation material
Manual German / English
S26361-K827-V240
Fujitsu PCR M1 742 S
(PRIMECENTER Rack M1 42 U)
Basic cabinet (2,003 mm) according to protection type IP20 with side panels, front- and twin back-door lockable.
Symmetrical large basic cabinet with 740mm post distance.
4 vertical mounting frames 19" 1U,
2 each left/right from horiz. 19" area.
Outlets for external cabling, cable outlet to the top, below, and one rear door.
Addition of several racks without accessory, no personal variation.
Basic rack without power connection; refer to part H/I for further informations and order numbers (connection concepts).
HxWxD = 2003 x 700 x 1050 mm including:
- installation preparation
- packing/shock pallet
- accessory pack including:
Accessory pack with various installation material
Manual German / English
Front mounting frame left - symmetrical.
This mounting frame allows vertical installation of
19'' components; e.g. 4x1U in 42U or 2x1U in 24U with a depth less than 300 mm incl. cabeling and less 3.5kg per height unit, left or right from 19" area.
For sideward mounting left or right side you can use e.g. console switches, rack management systems etc.
Mounting brackets must come with the components.
Free space has to be filled with dummy panels.
Rack Options PCR M1 - S26361-…
...F4530-L210 Tilting Protection Pull Out PCR M1
Must be ordered with the rack if teleskopic rails are used!
No mounting ex factory - loose delivery!
...-F4530-L250 Brush Panel Kit (2pcs) Top Cover
PCR M1 42U
...-F4530-L260 Brush Panel Kit Rear Door PCR M1
...-F4530-L6 Earthing Kit PCR M1
...-F4530-L131 Dummy panel 1U plast. Bk
...-F4530-L132 Dummy panel 2U plast. Bk
Rack Options PCR M1 - S26361-
Other rack options used for PRIMECENTER racks please look to sektion B "Accessories"
A
To avoid order problems, please send along the picture of the system-architect.
Fujitsu Technology Solutions x86 PRIMERGY Server 4 von 24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
Rack-configurations with systems in symmetrical PCR M1 - 600mm x 1050mm
S26361-K827-V310
Fujitsu PCR M1 616 S
(PRIMECENTER Rack M1 16U)
Basic cabinet (842mm) according to protection type IP20 with side panels, front- and twin back-door lockable.
Symmetrical large basic cabinet with 740mm post distance.
Outlets for external cabling, cable outlet to below, and one rear door.
Addition of several racks without accessory, no personal variation.
Basic rack without power connection; refer to part H/I for further informations and order numbers (connection concepts).
HxWxD = 847 x 600 x 1050 mm including:
- installation preparation
- packing/shock-pallet
- accessory pack including:
Accessory pack with various installation material
Manual German / English
S26361-K827-V320
Fujitsu PCR M1 624 S
(PRIMECENTER Rack M1 24U)
Basic cabinet (1,203mm) according to protection type IP20 with side panels, front- and twin back-door lockable.
Symmetrical large basic cabinet with 740mm post distance.
Outlets for external cabling, cable outlet to below, and one rear door.
Addition of several racks without accessory, no personal variation.
Basic rack without power connection; refer to part H/I for further informations and order numbers (connection concepts).
HxWxD = 1203 x 600 x 1050 mm including:
- installation preparation
- packing/shock-pallet
- accessory pack including:
Accessory pack with various installation material
Manual German / English
S26361-K827-V340
Fujitsu PCR M1 642 S
(PRIMECENTER Rack M1 42 U)
Basic cabinet (2,003 mm) according to protection type IP20 with side panels, front- and twin back-door lockable.
Symmetrical large basic cabinet with 740mm post distance.
Outlets for external cabling, cable outlet to the top, below, and one rear door.
Addition of several racks without accessory, no personal variation.
Basic rack without power connection; refer to part H/I for further informations and order numbers (connection concepts).
HxWxD = 2003 x 600 x 1050 mm including:
- installation preparation
- packing/shock pallet
- accessory pack including:
Accessory pack with various installation material
Manual German / English
A
To avoid order problems, please send along the picture of the system-architect.
Rack Options PCR M1 - S26361-…
...F4530-L210 Tilting Protection Pull Out PCR M1
Must be ordered with the rack if teleskopic rails are used!
No mounting ex factory - loose delivery!
...-F4530-L250 Brush Panel Kit (2pcs) Top Cover
PCR M1 42U
...-F4530-L260 Brush Panel Kit Rear Door PCR M1
...-F4530-L6 Earthing Kit PCR M1
...-F4530-L131 Dummy panel 1U plast. Bk
...-F4530-L132 Dummy panel 2U plast. Bk
Rack Options PCR M1 - S26361-
Other rack options used for PRIMECENTER S2 racks also, please look to sektion B "Accessories"
Fujitsu Technology Solutions x86 PRIMERGY Server 5 von 24
A
Build in Basic Units
To ensure that a 19" PRIMERGY Server or PRIMERGY Subsystem can be mounted into the rack ex works, you have to order one "mounting kits for 19" PRIMECENTER Racks" out of the relevant configurators once per
Server or PRIMERGY Subsystems.
SNP:SY-F1647E301-P
Rack-mounting ex factory for all servers and subsystems
S26361-F1647-E302
Rack-mounting ex factory only for FibreCAT TXF
RX100, RX200
S26361-F1647-E100
Rack demounting server ex factory
Service fee, once per rack
All servers will be shipped separatly
Option for PCR M1: 16, 24, 42U
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
For PRIMERGY Servers equal or higher than
S4 generation, RMK's and cable management can be ordered as options.
Please see related system configurators!
For easier transportation racks above 250kg can be delivered without installed systems.
Service fee S26361-F1647-E100 has to be ordered once per rack.
B
This service has to be ordered once per installable server/ storage subsystem, in order to get the server / storage subsystem mounted into the PRIMECENTER rack.
For servers or storage subsystems to be installed on customer site into an asymmetrical PRIMECENTER rack for each system an adapter angle has to be ordered according to size and weight of the 19" component:
S26361-F2735-L10 for systems up to 25kg / max. 2U
S26361-F2735-L15 for systems up to 35kg / max. 5U
S26361-F2735-L31 or systems up to 50kg / max. 5U
Depending on rail type choose a suitable cable management for usage with teleskopic rails
Fujitsu Technology Solutions x86 PRIMERGY Server 6 von 24
B Rack Accessories
S26361-F4530-E6
Earthing Kit PCR M1 + ass.
for earthing of cabinet, accessories and doors according to VDE 0100 part 540. Cabels to connect all conductive parts to the designated points are included.
Erarthing set is optional and is according to the standard not necessary.
max. 1x per rack
S26361-F4530-E131
Dummy panel plast. Bk, 1 U + assembly
S26361-F4530-E132
Dummy panel plast. Bk, 2 U + assembly
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
S26361-F4530-L6
Earthing Kit PCR M1
As loose delivery to upgrade at the customer.
Earthing connectors are already available in the rack.
The dummy panels can also be used for vertical mounting frames
S26361-F4530-L13* for bulk ware orders
S26361-F1609-E35
Device base plate, 680mm deep including dummy panel 1U and adapter angle 50 kg+ mounting kit for PCR-/ 3rd party racks
S26361-F1609-L35
For add-on components, which comes additionally in the rack.
Please notice necessary high units!
C
S26361-F2735-E20
Cable carrying tray for asym. PC Racks additional tray for sidewise routing and filing of cable bulks
S26361-F2735-L20
For sidewise filing of cable bulks only for asymmetrical
PRIMECENTER racks, no U needed
S26361-F2735-E25
Cable carrying plate 1U with dust cover installation horizontal and vertically possible
S26361-F2201-E20
Cable arm for 2U servers or higher for PRIMERGY server RMKs w/o CMA adapter in symmetrical PCR M1 or in 3rd party racks.
S26361-F2735-L25
In order to route cables into a rack from front to rear of the rack also suitable for patch panels
S26361-F2201-L20
Orderable as an option.
Cable arm solution for 2U servers or higher for PRIMECENTER or
3rd party racks.
Not usable for Drop-in-RMKs with
CMA adapter.
S26361-F2735-E8
1U cable arm, hauled
Been suitable for the application also with 1U server into PRIMECENTER rack
Serves as a substitute of the actual cable management arm for 3rd party racks
(S26361-F2201-L20)
Is mountable in the right plinth as well as in the left plinth of the racks. max. 1x per height unit (U)
S26361-F2735-L8
1U cable arm, hauled
As loose delivery to upgrade at the customer.
Not usable for Drop-in-RMKs with
CMA adapter.
see register general rack accessories also
Fujitsu Technology Solutions x86 PRIMERGY Server 7 von 24
C Rack Console (Keyboard, Mouse, Monitor)
S26361-K1387-V100
Rack console RC25 (1U)
17" TFT monitor with slide-in incl. keyboard DE/INT with touchpad,
(Layout in german and US english) and RMK D/P/3rd P Racks telescopic rails
Depth-variable from 708-786mm +/-2mm connection KB/Touchpad over PS/2 (2x) or USB (1x optional) is supported.
VGA-/ PS2-and USB-cable, part of delivery ( 3m)
Country spezific version of RC25
German / US Englisch
S26361-K1387-V100 RC25 1U TFT, KB GE/US
US, Englisch
S26361-K1387-V200 RC25 1U TFT, KB US
US, Russian (Cyrillic)
S26361-K1387-V250 RC25 1U TFT, KB US RU
UK, Englisch
S26361-K1387-V300 RC25 1U TFT, KB UK
French
S26361-K1387-V350 RC25 1U TFT, KB TR
Turkish
S26361-K1387-V400 RC25 1U TFT, KB F
Spanish
S26361-K1387-V500 RC25 1U TFT, KB E
Italian
S26361-K1387-V600 RC25 1U TFT, KB I
Portuguese
S26361-K1387-V650 RC25 1U TFT, KB PT
Danish
S26361-K1387-V700 RC25 1U TFT, KB DK
Swedish
S26361-K1387-V750 RC25 1U TFT, KB SW
Belgian
S26361-K1387-V800 RC25 1U TFT, KB B
Japan
S26361-K1387-V900 RC25 1U TFT, KB B
SNP:KB-Y2607E180-P
VGA-extension cable 1,8 m + assembly
T26139-Y2691-C180 for single order of the
VGA-extension cable 1,8 m
D
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
T26139-Y1742- L10
Grey power cord 1,8m for RC25 only for direct deliverys to USA / CAN.
New global analog KVM s3 switches can be mounted behind
RC25 in order to save rack space refer to KVM section
Only to be selected for
Monitor installation set if no console switch is required
Fujitsu Technology Solutions x86 PRIMERGY Server 8 von 24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
D Global KVM S3 / S4 switches
Analogue KVM S3 Switches
S26361-F4473-E601
Console Switch KVM s3-1601
16-port with OSD, multi-platformable
1x local, 0x IP, 1U, cascadable for connecting 16 servers to a monitor and a keyboard with an integrated touchpad or a keyboard and mouse.
Wiring over UTP CAT5,
Connection at servers with USB, PS/2
- 19" fixture (Installation horizontal and
vertically possible)
- User manual in englisch for the connection of 16 servers in the Non
Blocking Mode or cascaded with other switches in Blocking Mode. (Cascading with S* series is permitted.)
There are one local consoles in the rack connectablly.
Occupies 1U in the Rack
S26361-F4473-E801
Console Switch KVM s3-0801
8-port with OSD, multi-platformable
1x local, 0x IP, 1U, cascadable for connecting 8 servers to a monitor and a keyboard with an integrated touchpad or a keyboard and mouse.
Wiring over UTP CAT5,
Connection at servers with USB, PS/2
- 19" fixture (Installation horizontal and
vertically possible)
- User manual in englisch for the connection of 8 servers in the Non
Blocking Mode or cascaded with other switches in Blocking Mode. (Cascading with S* series is permitted.)
There are one local console in the rack connectablly.
Occupies 1U in the Rack
S26361-F4473-L801
S26361-F4473-L601 for single order of the
KVM s3- switch series
T26139-Y1742- L10
Grey power cord 1,8m for KVM
Switch. Only for direct deliverys to USA / CAN.
S26361-F4473-E691
Console Switch KVM s3-1601 for integration behind RC25
Occupies 0U in the Rack max. 1x per rack
S26361-F4473 E891
Console Switch KVM s3-0801 for integration behind RC25
Occupies 0U in the Rack max. 1x per rack
S26361-F4473-E25
Integration kit RC25
S26361-F4473-L25
Integration kit RC25 plus standard -L number of
KVM switch for RC25 integration; same switch but 0U
E
Digital KVM s4 over IP Switches
S26361-K1393-V8
Console Switch KVM s4-0812 VM
8-port with OBWI, multi-platformable
1x local, 2x IP, 1U, cascadable for connecting 8 servers to a monitor and a keyboard with an integrated touchpad or a keyboard and mouse.
Wiring over UTP CAT5,
Connection at servers with USB or PS/2
- KVM s4-Client SW for remote access over
LAN, is included in the scope of supply.
- 16 bit video compression
- Virtual Media support via USB 2.0
all USB 2.0 media released for PRIMERGY server are allowed, local or remote including
USB boot
KVM s3 USB2.0 adapter must be used
- LDAP support
- 19" fixture (Installation horizontally and
vertical possible)
- User manual in EN, DE, JP, SP, IT, FR for the connection of 8 servers in the Non
Blocking Mode or cascaded with other switches in Blocking Mode. (Cascading with Sx series is permitted.)
Please provide LAN connection with 100/1000
KVM data are digitized and will be available over LAN.
A local console is likewise connectable.
Simultaneously use of both access options
S26361-K1393-V16
Console Switch KVM s4-1622 VM
16-port with OBWI, multi-platformable
2x local, 2x IP, 1U, cascadable for connecting 16 servers to a monitor and a keyboard with an integrated touchpad or a keyboard and mouse.
Wiring over UTP CAT5,
Connection at servers with USB or PS/2
- KVM s4-Client SW for remote access over
LAN, is included in the scope of supply.
- 16 bit video compression
- Virtual Media support via USB 2.0
all USB 2.0 media released for PRIMERGY server are allowed, local or remote including
USB boot
KVM s3 USB2.0 adapter must be used
- LDAP support
- 19" fixture (Installation horizontally and
vertical possible)
- User manual in EN, DE, JP, SP, IT, FR for the connection of 16 servers in the Non
Blocking Mode or cascaded with other switches in Blocking Mode. (Cascading with Sx series is permitted.)
Please provide LAN connection with 100/1000
KVM data are digitized and will be available over LAN.
A local console is likewise connectable.
Simultaneously use of both access options
Cascading of KVM s2 /s3 and KVM s4- switche series is generally possible, whereby the KVM s3 switches must always be at the end of the cascade with s2 switches.
KVM s4-3242/1622/0812 on top of KVM s3-1601/-0801
KVM s4-3242/1622/0812 on top of KVM s2-1602/-0801
KVM s3-1601/0801 on top of KVM s3-1601/-0801
KVM s3-1601/0801 on top of KVM s2-1602/-0801
S26361-K1393-V32
Console Switch KVM s4-3242 VM
32-port with OBWI, multi-platformable
2x local, 4x IP, 1U, cascadable for connecting 32 servers to a monitor and a keyboard with an integrated touchpad or a keyboard and mouse.
Wiring over UTP CAT5,
Connection at servers with USB or PS/2
- KVM s4-Client SW for remote access over
LAN, is included in the scope of supply.
- 16 bit video compression
- Virtual Media support via USB 2.0
all USB 2.0 media released for PRIMERGY server are allowed, local or remote including
USB boot
KVM s3 USB2.0 adapter must be used
- LDAP support
- 19" fixture (Installation horizontally and
vertical possible)
- User manual in EN, DE, JP, SP, IT, FR for the connection of 32 servers in the Non
Blocking Mode or cascaded with other switches in Blocking Mode. (Cascading with Sx series is permitted.)
Please provide LAN connection with 100/1000
KVM data are digitized and will be available over LAN.
A local console is likewise connectable.
Simultaneously use of both access options
Cascading of the KVM S2 switches among themselves will be done only with the help of a
UTP CAT 5 cable (ARI-port) (S26361-F2293-E501)
For cascading with analoge S3 switches the KVM
S2
-adapters and the UTP CAT 5 cables (blue, RJ45) are used.
These are to be ordered 1x per switch which will be cascaded.
Fujitsu Technology Solutions x86 PRIMERGY Server 9 von 24
max. 32x
E KVM
Sx
adapters and cables
KVM adapter w/o integrated CAT5 cable, to be ordered together with adapter
S26361-F2293-E201
KVM
S2
adapter PS/2-VGA
2x PS/2 - VGA (Server connection)
to UTP CAT 5 at the KVM
S2
-Switch)
Connection from the mouse-/KB-/Video-Port of the server and by CAT 5 cable to the KVM Sx-switch. UTP CAT 5 cable
1x for each adapter is to order additionally.
1x per server
S26361-F2293-E202
KVM
S2
adapter USB-VGA
1x USB - VGA (Server connection)
to UTP CAT 5 at the KVM
S2
-Switch)
Connection from the mouse-/KB-/Video-Port of the server and by CAT 5 cable to the KVM Sx-switch. UTP CAT 5 cable
1x for each adapter is to order additionally.
1x per server
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
S26361-F2293-E203
KVM
S3
adapter USB2.0-VGA VM
1x USB - VGA (Server connection)
to UTP CAT 5 at the KVM
S2
-Switch)
Connection from the mouse-/KB-/Video-Port of the server and by CAT 5 cable to the KVM S3-switch. UTP CAT 5 cable
1x for each adapter is to order additionally.
1x per server
S26361-F4473-E241
KVM s4 adapter true serial-VGA
1x serial - (serial device connection)
to UTP CAT 5 at the KVM s4-Switch)
Connection from the serial device-Port of the serial device and by CAT 5 cable to the KVM s4-switch. UTP CAT 5 cable
1x for each adapter is to order additionally.
1x per server
S26361-F4473-E240
KVM s4 adapter USB2.0-VGA VM&CAC
1x USB - VGA (Server connection)
to UTP CAT 5 at the KVM s4-Switch)
Connection from the mouse-/KB-/Video-Port of the server and by CAT 5 cable to the KVM s4-switch. UTP CAT 5 cable
1x for each adapter is to order additionally.
1x per server
S26361-F2293-E501
UTP CAT 5 cable (blue, RJ45) the length is customized and is accordingly inserted.
Connection cable between KVM S2-Switch and the CAT 5 port of the KVM S2-adapters
1x per adapter
For the cabling of a PRIMECENTER Rack the length of the adapter set is customized in order to offer the best possible cable management. The number of cables have to be ordered according to the number of servers which have to be connected.
For the supplementory order of KVM
S2
-Switches can be ordered the following cable length of the UTP CAT 5 of cable (blue, RJ45) loosely. The appropriate
KVM S2-adapter is to be ordered likewise .
S26361-F2293-L20 with 2m lenght or
S26361-F2293-L50 with 5m lenght or
S26361-F2293-L10 with 10m lenght.
1x per server / adapter
KVM adapter w/ integrated CAT5 cable
S26361-F2293-E203
The KVM s3 USB2.0-VGA adpater has to be ordered for each server which shall be configured for virtual media. Can be used with all KVM Sx switches, but VM is only working with S3 switch and s3 client SW
Not to be used with PRIMEPOWER and Servers without composite USB 2.0 support. For USB boot the server
BIOS must support USB boot.
Virtual Media is not released for PRIMEPOWER max 16x
S26361-F4473-E225
KVM s3 SMB adapter USB-VGA 2,1m
1x USB - VGA (Server connection) to UTP CAT 5 at the KVM s3-s4-Switch
Connection from the mouse-/KB-/Video-Port of the server with integrated CAT 5 cable to the KVM Sx-switch. UTP CAT 5 cable integrated with 2,14m lengths
1x per server
S26361-F4473-E230
KVM s3 SMB adapter USB-VGA 3m
1x USB - VGA (Server connection) to UTP CAT 5 at the KVM s3-s4-Switch
Connection from the mouse-/KB-/Video-Port of the server with integrated CAT 5 cable to the KVM Sx-switch. UTP CAT 5 cable integrated with 3m lengths
1x per server
S26361-F2293-L201
S26361-F2293-L202
S26361-F2293-L203 for single order of the
KVM S2 -adapter PS/2-VGA and USB-VGA
S26361-F4473-E241
S26361-F4473-E240 for single order of the
KVM s4-adapter serial and USB2.0-VGA VM
These USB SMB type of adapter already includes a CAT5 cable
FW flash update not possible
S26361-F4473-E225
S26361-F4473-E230 for single order of the
KVM s3- SMB adapter
USB-VGA w/ CAT5 cable
F
Fujitsu Technology Solutions x86 PRIMERGY Server 10 von 24
F
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
Within the basic units of PRIMECENTER racks, are no power outlets integrated.
It is possible to order such power outlets as follows (1- or 3- phase power outlet), or the connections to the mains can be done via an UPS. In case there is no 16A CEE plug choosen (1-phase solutions is with an 16A CEE plug, while it is choosable with the 3-phase solution), the connection to the mains (line) has to be done as an fix connectionfrom an certified electrician according to the existing regulations.
The maximum current load for each phase may not exceed 16amp (with fixed connection, CEE and safety socket), for each Euro socket connector may 10A not be exceeded.
3-phase power socket outlet 3~240 volt / 16 A
I
S26361-F2262-E31
3-phase permanent connection with 3x8 (24) IEC320 C13 socjekts
12x dual pairs, different colours per phase
+ 4m cable with 16A CEE (IEC 309) red plug
CEE
1-phase power socket outlet 1~240 volt / 16A
II
S26361-F2262-E40
1-phase connection with 10
Euro socket connectors, 4m cable connected with 16A
CEE 1-phase plug blue colour
S26361-F2262-E41
1-phase permanent connection with 10x IEC320 C13 Euro socket connectors, 4m cable with NEMA
L6-30 plug only for USA / CAN
CEE
Horizontally mounting in symmetrical
PRIMECENTER M1 Racks
SNP:SY-F1903E2-P
Multiple socket outlet 4x peripherals +
1 x safety plug as extension, with safety plug at the connection cable (3m in length) max. 2x per rack *)
III
4
Extension of the 1/3 phase connection possibilities
SNP:SY-F1903E1-P
Expansion 3 safety sockets (D) as extension, with 10A Euro socket connector at the connection cable
(1,5m in length)
1x per phase of the socket strip I + II
SNP:SY-F1903E2-P
Multiple socket outlet 4x peripherals +
1 x safety plug as extension, with safety plug at the connection cable (3m in length)
1x per phase of the socket strip I
*) Consider the power rating!
Order numbers for bulk delivery
S26361-F2262-L31
S26361-F2262-L40
S26361-F2262-L41
SNP:SY-F1903L1-P
SNP:SY-F1903L2-P
G
Max. number of socket strips:
S26361-F2262-E31 max. per rack (*1)
4x 42 U rack
2x 24 U rack
S26361-F2262-E40
S26361-F2262-E45 max. per rack (*1)
8x 42 U rack
4x 24 U rack
2x 16 U rack
SNP:SY-F1903E2-P max. per rack (*1) the Inrush current must not be more than 3,5mA
2x 42 U rack
2x 24 U rack
2x 16 U rack
(*1) max. socket strips might depend on rack type asym.or symm. and width
(700/600mm); for max. no. of socket strips horizontal mounting with
1x S26361-4530-E301/L301
(needs 3U) is required: see rack manual for details.
http://manuals.ts.fujitsu.com/file/10276/pcrm1-um-en.pdf
Fujitsu Technology Solutions x86 PRIMERGY Server 11 von 24
G Power Socket Outlets
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
Within the basic units of PRIMECENTER racks, are no power outlets integrated.
It is possible to order such power outlets as follows (1- or 3- phase power outlet), or the connections to the mains can be done via an UPS. The maximum current load for each phase may not exceed 32amp (IEC309, CEE plugs).
For each Euro socket connector IEC320 C14 may 10A and for IEC320 C20 may 16A not be exceeded.
3-phase power socket outlet 3~240 volt / 32 A Horizontally mounting in symmetrical
PRIMECENTER M1 Racks
S26361-F2262-E332
3-phase permanent connection with 3x3 (9) IEC320 C19 sockets plus 3x2 (6) IEC320 C13 sockets different colours per phase secured by either 16A or 10A circuit breakers
+ 4m cable with 32A CEE (IEC 309) red plug
S26361-F2262-E301 mounting kit for horizontal mounting in a Rack can carry up to 2 PDU`s E332 or as max.
as a max. configuration 4x PDU's E132
As a mixed configuration the customer is able to configure 2x E132 and 1x E332 incl. 2x1U cover, support bracket, occupies 2U
1-phase power socket outlet 1~240 volt / 32A
Horizontally mounting in symmetrical
PRIMECENTER M1 Racks
S26361-F2262-E132
1-phase connection with 3 IEC320 C19 sockets and 16A circuit breaker plus 2 IEC320 C13 sockets and 10A circuit breaker
+ 4m cable with 32A CEE (IEC 309) blue plug incl. support brackets for 19" vertical mounting horizontal mounting ocupies 2U(S26361-F2262-E301) this the RMK must be ordered for rear mountig, a support bracket is needed as well for asym. racks.
Horizontally mounting in symmetrical
600 mm PRIMECENTER M1 Racks
S26361-F2262-E45
1-phase connection with 8
Euro socket connectors, 4m cable connected with 32A
CEE 1-phase (big) plug blue colour
Note: recommended for server > 1200 W
Extension of the 1/3 phase connection possibilities
Order numbers for bulk delivery
S26361-F2262-L332
S26361-F2262-L132
S26361-F2262-L45
S26361-F2262-L301
SNP:SY-F1903E1-P
Expansion 3 safety sockets (D) as extension, with 10A Euro socket connector at the connection cable
(1,5m in length)
1x per phase of the socket strip I + II
SNP:SY-F1903E2-P
Multiple socket outlet 4x peripherals +
1 x safety plug as extension, with safety plug at the connection cable (3m in length)
1x per phase of the socket strip I
H
Max. number of socket strips for vertical mounting:
S26361-F2262-E132 max. per rack
4x 42 U rack
2x 24 U rack
1x 16 U rack horizontal mounting only via new designed Rackmount kit
S26361-F2262-E301 Socket strip RMK 2U horizontal
S26361-F2262-E332 max. per rack
4x 42 U rack
1x 24 U rack
0x 16 U rack horizontal mounting only via new designed Rackmount kit
S26361-F2262-E301 Socket strip RMK 2U horizontal
Horizontally mounting in symmetrical
600 mm PRIMECENTER M1 Racks
Fujitsu Technology Solutions x86 PRIMERGY Server 12 von 24
I
H
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
Configurations see UPS configurator
Uninterruptible power supply for 220 V
Further information to the connection configurations and the orderable APC on-line / line Interactive UPS combinations as well as reference to the estimation of the power demand of the UPS you will find in the UPS configurator.
Here only the power connection possibilities of the servers are described to the UPS's.
Attention! This UPS does not support 110V - connection
S26361-F2735-E15
Adapter angle 150 kg
Extension of the UPS connection possibilities
For bulk delivery
S26361-F2262-L42
SNP:SY-F1903L1-P
S26361-F2262-E42
1-phase power outlet with
10x periheral plugs
+ 2m cable with 16A IEC 320 C20
Only for connection to electrical outlets (16 A IEC 320C19) of the 3000 VA / 5000 VA UPSs.
It expands the number of usable power outlets.
KS
Only for 8kVA and 10kVA to use the hardwire connectivity of the UP
S26361-K915-V80 and S26361-K915-V100
S26361-F2262-E500
UPS PDU 50A 2U,6x16A+4x10A IEC320
Power distribution unit for UPS hard wire output
For APC Online UPS and Runtime expansion modules occupies 2U in racks
S26361-F2735-E131
Dummy panel plastics, 2 U + assembly
S26361-F2735-L15
adapter angle up to 150KG
UPS configurator
Power connection sockets to the APC UPS for servers:
Line Interactive
1500 VA UPS
4x euro sockets -C13 (10A)
3000 VA UPS
8x euro sockets -C13 (10A)
1x euro socket -C19 (16A)
5000 VA UPS
8x euro sockets -C13 (10A)
2x euro sockets -C19 (16A)
SNP:SY-F1903E1-P
Multiple socket outlet, 3x safety plug as extension with peripheral power connector at the connection cable (1,5m in length)
1x per UPS
Online
3000 / 5000 VA UPS
8000 / 10000 VA UPS
S26361-F2262-L500
UPS PDU 50A 2U,6x16A+4x10A IEC320
Loose delivery
Conection at customer side has to be done by an electrician.
PDU will be connected when ordered together with the UPS and an
PRIMECENTER Rack ex factory
8x euro sockets -C13 (10A)
2x euro sockets -C19 (16A)
4x euro sockets -C13 (10A)
4x euro sockets -C19 (16A)
Terminal block fixed connection
UPS connections expandable through:
S26361-F2262-E42
SNP:SY-F1903E1-P
End of PRIMECENTER M1 19-inch Rack
Fujitsu Technology Solutions x86 PRIMERGY Server 13 von 24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
10 GbE Twinax Cabling
TWINAX-Cabling with virtual SFP+ modules
Virtual SFP+ modules
V:TWX CONNECTOR -BR
(Brocade)
Used in
CB VDX 2730
S26361-K1429-Vxxx
Supported cables
S26361-F3873-E500
EBR800-TWX-1M-L
EBR800-TWX-3M-L
EBR800-TWX-5M-L
V:TWX CONNECTOR CI
(Cisco)
Ext. Switch Brocade 8000
EBR800
Ext.Switch ICX 6450-24/48
S26361-K1477-V110/V111
Ext. Switch VDX 6720-60
S26361-K1452-V100
Ext. Switch VDX 6720 for DI-
Blocks
D:VDX6720-16-R-M
CB FEX B22F
S26361-K1440-V100
V:TWX CONNECTOR PY
(FTS)
V:TWX CONNECTOR SP
CB SB11
S26361-K1304-V101 / V301
10GB LAN controller D2755
S26361-F3629-E2 / E202 /
E702
10Gb CNA OCe10102
S26361-F3592-E2 / E202
CB SBAX2
S26361-K1304-V200 / V300
CB Ethernet Pass Thru
S26361-K1365-V18 / V318
S26361-F4571-E500
S26361-F4571-L110
S26361-F3989-E600
S26361-F3873-E500
EBR800-TWX-1M-L
EBR800-TWX-3M-L
EBR800-TWX-5M-L
S26361-F4571-E500
S26361-F3989-E600
S26361-F3873-E500
EBR800-TWX-1M-L
EBR800-TWX-3M-L
EBR800-TWX-5M-L
Product number
V:TWX CONNECTOR-BR
V:TWX CONNECTOR CI
V:TWX CONNECTOR PY
V:TWX CONNECTOR SP
Connector
FC TWX 10G connector BR
FC TWX 10G connector CI
FC TWX 10G connector PY
FC TWX 10G connector SBAX
Comment
Brocade customized
Brocade 1m
Brocade 3m
Brocade 5m
Cisco customized
FTS customized
Brocade customized
Brocade 1m
Brocade 3m
Brocade 5m
Cisco customized
FTS customized
Brocade customized
Brocade 1m
Brocade 3m
Brocade 5m
Description
Twinax Connector Brocade
Twinax Connector Cisco
Twinax Connector Primergy
Twinax Connector SBAX2 und PassThru
Rack-specified Twinax-cable for graphical Cabling within the PRIMECENTER M1 Rack:
S26361-F3873-E500
S26361-F3989-E600
S26361-F4571-E500
SFP+ activ Twinax Cable Brocade custom
SFP+ aktives Twinax Kabel kundenspez.
SFP+ passive Twinax Kabel Cisco custom
2x FC TWX 10G connector BR
2x FC TWX 10G connector PY
2x FC TWX 10G connector CI
Twinax-cable for graphical Cabling outside the PRIMECENTER M1 Rack (between racks):
EBR800-TWX-1M-L
EBR800-TWX-3M-L
EBR800-TWX-5M-L
S26361-F4571-L110
SFP+ active Twinax cable BRCD 1m UPG
SFP+ active Twinax cable BRCD 3m UPG
SFP+ active Twinax cable BRCD 5m UPG
SFP+ active Twinax cable Cisco 10m
2x FC TWX 10G connector BR
2x FC TWX 10G connector BR
2x FC TWX 10G connector BR
2x FC TWX 10G connector CI
In Addition the optional configurable Twinax-cable options (not for graphical cabling in systemarchitect usable!)
(to find under chapter "Hardware – Options" of the Blade system units BX900S2 and BX400S1)
S26361-F3873-L501
S26361-F3873-L503
Brocade 1m
Brocade 3m
S26361-F3873-L505 Brocade 5m
S26361-F4571-L101
S26361-F4571-L103
S26361-F4571-L105
S26361-F4571-L107
S26361-F3989-L102
S26361-F3989-L105
S26361-F3989-L110
Cisco 1m
Cisco 3m
Cisco 5m
Cisco 7m
FTS 2m
FTS 5m
FTS 10m
Fujitsu Technology Solutions x86 PRIMERGY Server 14 of 24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
J IB Switch Configuration
S26361-K1413-V136
InfiniBand Switch 36-port 40GB
36 ports with QSFP connectos up to 40Gb/s per port
Quad Data Rate (QDR)
Fully non blocking architecture mount on rear side of the rack
2U, 1x PSU installed
S26361-F4526-E10
Redundant PSU for QDR IB Switch
450W Power Supply max. 1x per QDR IB Switch
S26361-F3996-E500
InfiniBand Cu Cable 40Gb
QSFP, 1 or 3m, customised max. 36x per QDR IB Switch as soon as available
S26361-K1431-V36
InfiniBand Switch 36-port 56GB
36 ports with QSFP connectos up to 56Gb/s per port
Fourteen Data Rate (FDR)
Fully non blocking architecture mount on rear side of the rack
2U, 1x PSU installed
S26361-F4557-E10
Redundant PSU for FDR IB Switch
300W Power Supply max. 1x per FDR IB Switch
S26361-F3996-E556
InfiniBand Cu Cable 56Gb
QSFP, 1 or 3m, customised max. 36x per FDR IB Switch
End of PRIMECENTER M1 19-inch Rack
If additional length of copper cable or optical cable are needed, then they must be ordered from the cable vendor directly
For IB cabling ex works an customized IB Cable
S26361-F3996-E500 will be used (for rackserver in rack)
If additional length of copper cable or optical cable are needed, then they must be ordered from the cable vendor directly
For IB cabling ex works an customized IB Cable
S26361-F3996-E556 will be used (for rackserver in rack)
Fujitsu Technology Solutions x86 PRIMERGY Server 15 of 24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
IB-Cabling 40Gb (QDR)
PRIMERGY Server Cable- Nr.
InfiniBand Controller
S26361-F4475-E102/E202 in
RX200 S7 l
S26361-F3996-E500
RX/TX300 S7
RX350 S7
RX600 S6
RX900 S2
IB ConnectionBlade l l
S26361-F3996-E500
S26361-F3996-E500 l
S26361-F3996-E500
CX122 S1
CX120 S1
(only E202) l
S26361-F3996-E500 l
S26361-F3996-E500 l InfiniBand QSFP (connector in SA, 1x with E102 and 2x with E202)
Length
1 or 3 m customized
X
X
X
X
X
X
IB-Switch
S26361-K1413-V136 max. 36 ports l l l l l l and to other -F4475-E102/E202
InfiniBand Cu cable 40Gb, customized, order number: S26361-F3996-E500 (for cabling in SA)
InfiniBand Cu cable 40Gb, l=1m, Order-number: S26361-F3996-L101 (for loose delivery of the IB cable)
InfiniBand Cu cable 40Gb, l=3m, Order-number: S26361-F3996-L103 (for loose delivery of the IB cable)
Additional informations about cabling
Other Informations about IB cabling / controller releases, see the respective configurator
Please use also the above mentioned selection of 1m and 3m IB Cu cable for the rack-spreading IB-cabling.
Fujitsu Technology Solutions x86 PRIMERGY Server 16 von 24
IB-Cabling 56Gb (FDR)
PRIMERGY Server Cable- Nr.
InfiniBand Controller
S26361-F4533-E102/E202 bzw.
S26361-F4533-E103/E203 in
RX200 S7 l
S26361-F3996-E556
RX/TX300 S7
RX350 S7
RX500 S7 l
S26361-F3996-E556 l
S26361-F3996-E556
IB FDR ConnectionBlade l
S26361-F3996-E556
CX122 S1
CX250 S1
CX270 S1 l
S26361-F3996-E556 l
S26361-F3996-E556 l
S26361-F3996-E556
Length
1 or 3 m customized
X
X
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
IB-Switch
S26361-K1431-V36 max. 36 ports l l
X l l
X l
X
X l l
X l InfiniBand QSFP (connector in SA, 1x with E102 and 2x with E202) and to other -F4475-E102/E202 or -F4475-E103/E203
InfiniBand Cu cable 56Gb, customized, order number: S26361-F3996-E556 (for cabling in SA)
InfiniBand Cu cable 56Gb, l=1m, Order-number: S26361-F3996-L561 (for loose delivery of the IB cable)
InfiniBand Cu cable 56Gb, l=3m, Order-number: S26361-F3996-L563 (for loose delivery of the IB cable)
Additional informations about cabling
Other Informations about IB cabling / controller releases, see the respective configurator
Please use also the above mentioned selection of 1m and 3m IB Cu cable for the rack-spreading IB-cabling.
Fujitsu Technology Solutions x86 PRIMERGY Server 17 von 24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
K VDX 6720 Switch Configuration
S26361-K1452-V100
VDX Switch 40/50/60- 10GbE ports
VDX 6720, includes 40 SFP+ ports of
1/10 Gigabit Ethernet with Port side exhaust airflow. Ports only, do not include Optics. Comes with two 500W
Power supplies and three Fan units
S26361-F2735-E111
No RMK Option without rack mounting ex factory
Order -L50 if shipped w/o Rack max. 1x per Switch
S26361-F5122-E50
Rack Mounting Kit BROCADE
XBR-000306 for VDX 6720-xx max. 1x per Switch
S26361-F5122-L50
Rack Mounting Kit BROCADE
XBR-000306 Only for loose delivery
No mounting in racks possible to be ordered if no Rack is ordered
S26361-F2735-L10
Adapter angle PC/DC-Rack, till 50Kg necessary for mounting RMKs in asymmetrical racks to be ordered if no Rack is ordered
S26361-F4530-E11
Mounting 1U server in asymmetrical racks with 1U support bracket
S26361-F4530-E10
Mounting 1U server in symmetrical racks with 1U support bracket
40/60x
S26361-F2735-E25
Cable carrying plate 1U with dust cover installation horizontal and vertically possible
S26361-F2735-L25
In order to route cables into a rack from front to rear of the rack also suitable for patch panels
S26361-F1647-E302
Installation ex works for one server or subsystem.
Hereby the rack will be delivered completely pre-mounted and all wired connections are tested. With
PCR M1 16U, 24U, 42U: Systems and components will be delivered installed in the rack.
To be ordered only together with a
PRIMECENTER M1 rack cables installed.
PCR M1 e.g. S26361-K827-Vxxx refer to PCR M1 rack configurator max. 1x per System
PRIMERGY Classic 19" rack is not supported
"Rack-mounting ex factory"
This service is to be ordered once per installable server/storage subsystem, in order to get the server/storage subsystem mounted into the racks.
In case of the not-installed servers/ subsystems this service has to be ordered to get the mounting kits and the cables installed.
for upgrade to more ports
S26361-F5122-L1
POD Licence
Software License to enable 10 more ports on VDX-6720-40 max. 2x per Switch optional
S26361-F5122-L2
FCoE Licence
License for VDX6720-40, VDX 6720-
60, to enable FCoE max. 1x per Switch optional
S26361-F5122-L3
Cluster Switching) on VDX6720-40 or
VDX6720-60 max. 1x per Switch
S26361-F3873-E310
SFP+ Module SR 10GbE LC
SR SFP+ module for 10 Gbit max. 300m with OM3 fiber
850 nm laser
Ethernet FO cabling, MMF max. 40 bis 60 x per Switch as soon as available separate orderable 10Gb Ethernet modules & cables
S26361-F3873-E401
1GbE Copper Brocade SFP
SFP module for 1GbE
S26361-F3873-L310 SFP+ Module SR 10GbE LC max. 300m with OM3 fiber, Ethernet FO cabling, MMF
S26361-F3873-L311 SFP+ Module LR 10GbE LC connection. Max. 100m
RJ 45 connector max. 40 bis 60 x per Switch max. 10km with OM3 fiber, Ethernet FO cabling, SMF
S26361-F3873-L312 SFP+ Module LR 10GbE LC max. 40km with OM3 fiber; Ethernet FO cabling, SMF
S26361-F3873-L501
S26361-F3873-L503
S26361-F3873-L505
S26361-F3873-L401
SFP+ active twinax cable 1m
SFP+ active twinax cable 3m
SFP+ active twinax cable 5m
1GbE Copper Brocade SFP
*) in SA only shown in cabling view
S26361-F3873-E500 *)
SFP+ active twinax cable customized twinax cable for full rack setup ex factory cable length is selected by requirement in the factory max. 40 bis 60 x per Switch please order following
virtual comp for getting connector: V:TWX CONNECTOR
The conbination of the above SFP+ optics can not exceed the total amount of enabled switch ports (40/50/60)
For Twinax cabling ex works an customized cable
S26361-F3873-E500 will be used (for rackserver in rack)
End of PRIMECENTER M1 19-inch Rack
Fujitsu Technology Solutions x86 PRIMERGY Server 18 von24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
L ICX 6430 Switch Configuration
1x
S26361-K1477-V100
Brocade ICX 6430-24
24 Port 1 GbE switch, copper (RJ45),
4x1GbE SFP uplink ports, fanless
S26361-F5263-E50
Brocade ICX two post RMK
- for 3rd party racks
S26361-K1477-V101
Brocade ICX 6430-48
48 Port 1 GbE switch, copper (RJ45),
4x1GbE SFP uplink ports
S26361-F2735-E111 no RMK
- not RMK xxx
Brocade ICX four post RMK
- for PRIMECENTER M1 racks
The switch can be mounted into a Rack ex factory
1x per system 1x per system 1x per system
S26361-F4530-E11
Mounting 1U server in asymmetrical racks with 1U support bracket
S26361-F4530-E10
Mounting 1U server in symmetrical racks with 1U support bracket
S26361-F2735-E25
Cable carrying plate 1U with dust cover installation horizontal and vertically possible
S26361-F1647-E302
Installation ex works for one server or subsystem.
Hereby the rack will be delivered completely pre-mounted and all wired connections are tested. With
PCR M1 16U, 24U, 42U: Systems and components will be delivered installed in the rack.
To be ordered only together with a
PRIMECENTER M1 rack cables installed.
PCR M1 e.g. S26361-K827-Vxxx refer to PCR M1 rack configurator max. 1x per System
S26361-F2735-L25
In order to route cables into a rack from front to rear of the rack also suitable for patch panels
PRIMERGY Classic 19" rack is not supported
"Rack-mounting ex factory"
This service is to be ordered once per installable server/storage subsystem, in order to get the server/storage subsystem mounted into the racks.
In case of the not-installed servers/ subsystems this service has to be ordered to get the mounting kits and the cables installed.
V:TWX Connector-ICX for 1GbE Twinax Brocade up to 4x per switch
0 - 4x S26361-F5263-E11 *)
SFP for uplink ports
Direct attached 1GbE SFP copper, 1 meter only for stacking up to 4x per switch
S26361-F5263-E15 *)
SFP for uplink ports
Direct attached 1GbE SFP copper, 5 meter only for stacking up to 4x per switch
S26361-F5263-E101
SFP for uplink ports
1000BASE-TX SFP
Copper, RJ-45 Connector up to 4x per switch
*) in SA only shown in cabling view
End of PRIMECENTER M1 19-inch Rack
S26361-F5263-E102
SFP for uplink ports
1000BASE-SX SFP
MMF optic, LC connector optical monitoring capable up to 4x per switch
Fujitsu Technology Solutions x86 PRIMERGY Server 19 von24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
M ICX 6450 Switch Configuration
S26361-K1477-V110
Brocade ICX 6450-24
24 Port 1 GbE switch, copper (RJ45),
2x1GbE SFP+, optional 1/10GbE, plus 2x1/10GbE+,
4 uplink / stacking ports in total
S26361-K1477-V111
Brocade ICX 6450-48
48 Port 1 GbE switch, copper (RJ45),
2x1GbE SFP+, optional 10GbE, plus 2x1/10GbE+,
4 uplink / stacking ports in total
1x
S26361-F5263-E50
Brocade ICX two post RMK
- for 3rd party racks
S26361-F2735-E111 no RMK
- not RMK
1x per system 1x per system xxx
Brocade ICX four post RMK
- for PRIMECENTER M1
rack
1x per system
RMK configuration, see sheet ICX6430
The switch can be mounted into a Rack ex factory
V:TWX Connector-ICX for 1GbE Twinax Brocade up to 4x per switch
0 - 4x S26361-F5263-E11 *)
SFP for uplink ports
Direct attached 1GbE SFP copper, 1 meter only for stacking up to 4x per switch
S26361-F5263-E15 *)
SFP for uplink ports
Direct attached 1GbE SFP copper, 5 meter only for stacking up to 4x per switch
S26361-F5263-E101
SFP for uplink ports
1000BASE-TX SFP
Copper, RJ-45 Connector up to 4x per switch
S26361-F5263-E102
SFP for uplink ports
1000BASE-SX SFP
MMF optic, LC connector optical monitoring capable up to 4x per switch
0 - 4x
0 - 4x
S26361-F3873-E310
SFP+ for uplink ports
10GBase-SR SFP+ optic,
LC connector, MMF, up to 300 meter up to 4x per switch
S26361-F5263-L2
2x10GbE upgrade license
Software license to increase uplink speed from 1 GbE to
10 GbE for 2 ports up to 1x per switch
S26361-F3873-E311
SFP+ for uplink ports
10GBase-LR SFP+ optic,
LC connector, SMF, up to 10 km up to 4x per switch
This is an optional license.
If the license is installed, all uplink ports can run at 10GbE wire speed.
If not, two ports will stay at 1GbE while two ports are capable of 10GbE
V:TWX Connector-BR for 10GbE Twinax Brocade max. 4x per switch
S26361-F3873-E500 *)
SFP+ active twinax cable customized twinax cable for full rack setup ex factory cable length is selected by requirement in the factory
Brocade branded cable max. 4x per switch
*) in SA only shown in cabling view
S26361-F5263-L1
Brocade premium license
Brocade ICX6450 premium license. Enables layer 3 features up to 1x per switch
This is an optional license.
It enables advanced layer 3 features such as IP routing.
separate orderable 10Gb Ethernet modules & cables
S26361-F3873-L501 SFP+ active twinax cable 1m
S26361-F3873-L503
S26361-F3873-L505
SFP+ active twinax cable 3m
SFP+ active twinax cable 5m
End of PRIMECENTER M1 19-inch Rack
Fujitsu Technology Solutions x86 PRIMERGY Server 20 von24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
System configurator and order-information guide :
FibreCAT® TXF (Phased-out 12/2012)
Rack Backup Subsystem: 3U
The FibreCAT TXF is an innovative, easy-to-use, flexible and economical rack enclosure for backup devices.
With its wide range of supported backup devices with SAS or USB interfaces, it is best suited to consolidate data backups for rack-based servers in PRIMECENTER and third-party racks.
Available backup drives:
4 x 5,25 "with 1.6" height (HH) per I/O Modul (SAS or USB) for accessible drives
- SAS:
- USB
LTO5 HH, LTO4 HH, LTO3 HH, LTO2 HH
DDS Gen5, DDS Gen6, RDX
More information: FibreCAT TXF Configurator http://docs.ts.fujitsu.com/dl.aspx?id=61776716-c73f-4e57-9d3a-19821396a1f6
Fujitsu Technology Solutions x86 PRIMERGY Server 21 von 24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
Information about Smart USV in the internet see:
https://partners.ts.fujitsu.com/com/products/servers/primergy/rackcomp/components/usv/Pages/default.aspx
Fujitsu Technology Solutions x86 PRIMERGY Server 22 von 24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
general rack accessories
S26361-F4530-L250
S26361-F4530-L260
S26361-F4530-L210
S26361-F4530-L225
S26361-F4530-L6
S26361-F4530-L131
S26361-F4530-L132
S26361-F2735-L10
S26361-F2735-L15
S26361-F2735-L31
S26361-F2735-L150
S26361-F2735-L7
S26361-F2735-L81
S26361-F2735-L8
Brush Panel Kit (2pcs) PCR M1 for assembly in 42U PRIMECENTER M1 Racks at customer.
Brush Panel Kit (1pc) Rear Door PCR M1 for assembly in 42U PRIMECENTER M1 Racks at customer.
Tilting Protection Pull Out PCR M1 for assembly in PRIMECENTER M1 Racks at customer.
Rack Connection Kit for joining of 2 PRIMECENTER M1 Racks at customer.
Earthing Kit Racks PCR M1 for assembly in PRIMECENTER M1 Racks at customer.
Dummy panel 1U plastics satin black for assembly in 19" rack
Dummy panel 2U plastics satin black for assembly in 19" rack
Support bracket for asymmetrical racks, max. load up to 15kg (servers up to 25kg) for compensation of shifted post in asymmetrical PRIMECENTER racks
Support bracket for asymmetrical racks, max. load up to 35kg for compensation of shifted post in asymmetrical PRIMECENTER racks
Support bracket for asymmetrical racks, max. load up to 50kg for compensation of shifted post in asymmetrical PRIMECENTER racks
RMK-S Vario carrier w. L-shaped brackets easy rack mounting for 19inch rack systems in PC racks, max. load 50 kg
Cable magmt. for 19" DC- PC- Rack cable management for adding a server or storage subsystem from a 3rd party rack into the PRIMECENTER rack
1U cable arm for RMKs with cable management arm (CMA) adapter
1U cable arm for RMKs without CMA adapter cable arm for 1U PRIMERGY server, dragged for PRIMECENTER- and 3rd-party
Detail: mounted 1U cable arm at the left sife of 19" profile open with Adobe Acrobat reader
S26361-F2201-L20
S26361-F2735-L82
S26361-F2735-L320
S26361-F2735-L330
S26361-F1609-L35
S26361-F2735-L500
S26361-F2735-L510
2U cable arm for RMKs without cable management arm (CMA) adapter in PRIMECENTER M1 or 3rd party racks.
2U cable arm for RMKs with cable management arm (CMA) adapter
RMK-PDU 2U horizontal
RMK-PDU 3U horizontal
Add-on base plate, 680mm deep 1U for assembly in 19" rack (1U), with support bracket, anthracite cage nut set, M5, t=2,5mm
Content: 50 pieces orderable to boxes, server and racks
SCREW SET IO-BOX Rack Mounting
Content: M5X14-TORX screws, cage nuts, rosettes; each 16 pieces orderable to IO-boxes, switches and racks
Fujitsu Technology Solutions x86 PRIMERGY Server 23 von 24
System configurator and order-information guide
PRIMECENTER M1 Racks Status 2013-03-28
Changereport
Date Ordernumber Changes
2013-03-06 S26361-K1477-V1xx
2013-01-31 S26361-F3873-E401/L401 added Brocade ICX 6430 (new sheet) and ICX 6450 (new sheet) added 1GbE SFP for VDX6720
2012-12-13 S26361-F2735-L320/-L330 added RMK-PDU 2U/3U horizontal
2012-12-01 10GbE Twinax Cabling added sheet "Twinax cabling with virtual SFP+ modules
2012-10-10
2012-10-10 S26361-F2293-E411
2012-08-23 S26361-F2735-L150
2012-08-01 S26361-K1452-V100
VDX Switch config changed, -E number fo rSFP+ added, RMK no "MUST Order" option
EOL all content is marked to be delete
RMK with L-brackets for fix mounting of 19" systems
New Brocade 10GbE LAN-Switch VDX 6720
2012-03-30
2012-01-10
2011-07-27
2011-07-19
2011-07-01
PDU mounting rules
Update Rack Accessories add section G with standard PDU
Mounting of PDU's in 600mm PCR M1 Racks only horizontally with mounting kit
First edition for PRIMECENTER M1 Racks
Fujitsu Technology Solutions x86 PRIMERGY Server 24 von 24
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project