MODEL
LC-80LE857E
LC-80LE857RU
LC-80LE857K
LC-80LE858E
LC-70LE857E
LC-70LE857RU
LC-70LE857K
LC-70LE858E
OPERATION MANUAL
LCD COLOUR TELEVISION
LC-60LE855E
LC-60LE855K
LC-60LE857E
LC-60LE857RU
LC-60LE858E
CE Statement:
Hereby, SHARP Electronics (Europe) GmbH declares that this bundled
Wireless LAN USB adapter is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
The declaration of conformity may be consulted at:
http://www.sharp.eu/documents-of-conformity
NOTE
This bundled Wireless LAN USB adapter is designed for indoor use only.
CE Statement:
ASA
Hereby, SHARP Electronics (Europe) GmbH declares that this LCD TV is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
The declaration of conformity may be consulted at:
http://www.sharp.eu/documents-of-conformity
[ ENGLISH ]
Introduction
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure
safety and many years of trouble-free operation of your product, please read
Important safety precautions carefully before using this product.
Contents
Introduction.......................................................................1
Dear SHARP customer ................................................1
Contents ......................................................................1
Important safety precautions.......................................2
Supplied accessories ..................................................4
Optional accessories ...................................................4
Preparation .......................................................................5
Attaching the stand unit (for 60/70 inch models).........5
Attaching the stand unit (for 80 inch models) ..............6
Using the remote control unit ......................................7
Part names and functions................................................8
TV (front/side view) ......................................................8
TV (rear view) ...............................................................8
Remote control unit .....................................................9
Quick guide .....................................................................10
Operation overview....................................................10
Inserting the CA card into the CI module ..................12
Recording CAM PIN setting ......................................12
CI plus 1.3 Standard ..................................................12
Using the HOME screen ............................................13
Using the Menu screen..............................................14
Using Software keyboard ..........................................14
Initial auto installation ....................................................15
Initial auto installation ................................................15
Watching TV ....................................................................19
Daily operation...........................................................19
Favourite Channel Information ..................................21
Operator profile .........................................................21
EPG ...........................................................................22
Teletext ......................................................................25
Connecting external devices .........................................27
Introduction to connections.......................................27
Video connections .....................................................28
Audio connections .....................................................30
AQUOS LINK ...................................................................31
Controlling HDMI devices using AQUOS LINK .........31
AQUOS LINK connection ..........................................32
AQUOS LINK setup ...................................................33
Operating an AQUOS LINK device ............................33
Using a Smartphone with the TV ...............................35
Basic adjustment ............................................................36
Picture settings ..........................................................36
Audio settings ............................................................39
Power save settings ..................................................40
View settings .............................................................41
Individual setting — PIN ............................................44
Individual setting — Clock .........................................44
Individual setting — Language ..................................45
Useful viewing functions................................................46
Optional features settings..........................................46
Additional features .....................................................49
Other useful features .....................................................51
USB-recording ...........................................................51
How to operate USB-recording .................................52
USB media/Home network ........................................55
USB device compatibility ..........................................58
Home network server compatibility ...........................58
Selecting the picture size for video mode .................58
Connecting a PC.............................................................59
Connecting a PC .......................................................59
Displaying a PC image on the TV ..............................59
PC control of the TV ..................................................62
Network setup ................................................................64
Connecting to the network ........................................64
Net TV ..............................................................................66
What is Net TV? .........................................................66
Operations in Net TV .................................................66
Enjoying 3D image viewing............................................68
Before using the 3D glasses ......................................68
Preparing for the 3D glasses .....................................69
Using the 3D glasses .................................................70
Cautions for 3D image viewing..................................72
Display format for 3D and 2D images .......................73
Viewing 3D images ....................................................74
Configuring the TV settings to enhance 3D image
viewing ....................................................................75
Specifications — 3D glasses (sold separately)..........77
Troubleshooting — 3D Images ..................................77
Appendix .........................................................................78
Troubleshooting .........................................................78
Updating your TV via DVB-T/T2/C/S*/S2* .................80
Getting update information........................................80
Information on the software licence for this
product ....................................................................81
Updating your TV via USB/network...........................81
Trademarks ................................................................82
Software licences for Net TV .....................................83
Disclaimers for services using the Internet................83
Specifications ............................................................84
Specifications (Wireless LAN USB adapter) ..............85
Environmental specifications .....................................86
Mounting the TV on a wall .........................................86
Wall mount kit specifications .....................................87
Dimensional drawings ...............................................89
EU Energy Label for Televisions ................................91
* 857 series only
NOTE
• The illustrations and the OSD in this operation manual
are for explanation purposes and may vary slightly from
the actual operations.
• The examples used throughout this manual are based
on 60 inch models.
1
Introduction
Important safety precautions
• Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a
damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
• Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel,
do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in
the cabinet of the TV.
• Water and moisture—Do not use the product near water, such as
bathtub, washbasin, kitchen sink, laundry tub, swimming pool and
in a wet basement.
• Do not place vases or any other water-filled containers on this
product. The water may spill onto the product causing fire or electric
shock.
• Stand—Do not place the product on an unstable cart, stand, tripod
or table. Doing so can cause the product to fall, resulting in serious
personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or
sold with the product. When mounting the product on a wall, be sure
to follow the manufacturer’s instructions. Use only the mounting
hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care.
Sudden stops, excessive force and uneven floor surface can cause the product to fall
from the cart.
• Ventilation—The vents and other openings in the cabinet are designed for ventilation.
Do not cover or block these vents and openings since insufficient ventilation can
cause overheating and/or shorten the life of the product. Do not place the product on
a bed, sofa, rug or other similar surface, since they can block ventilation openings.
This product is not designed for built-in installation; do not place the product in an
enclosed place such as a bookcase or rack, unless proper ventilation is provided or
the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when
the product is dropped or impact applied. If the LCD panel is broken, be careful not
to be injured by broken glass.
• Heat sources—Keep the product away from heat sources such
as radiators, heaters, stoves and other heat-generating products
(including amplifiers).
• To prevent fire, never place any type of candle or naked flames on
the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the
TV set or other heavy items.
• Headphones—Do not set the volume at a high level. Hearing experts advise against
extended listening at high volume levels.
• Do not display a still picture for a long time, as this could cause an afterimage to
remain.
• There is power consumption always if main plug is connected.
• Servicing—Do not attempt to service the product yourself. Removing covers can
expose you to high voltage and other dangerous conditions. Request a qualified
person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture
details.
Due to the very large number of pixels, occasionally a few non-active pixels
may appear on the screen as a fixed point of blue, green, red or yellow. This is
within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by putting pressure
onto the display. Be sure to always carry the TV by two people
(80 inch: three people) holding it with two hands—one hand on
each side of the TV.
Caring for the cabinet
• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components
of the main unit cabinet or cause cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in
neutral detergent diluted with water and thoroughly wrung out, and then wipe with a
soft dry cloth.
• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet
and cause the paint to peel off.
• Do not apply insecticides or other volatile liquids. Also, do not allow the cabinet to
remain in contact with rubber or vinyl products for a long period of time. Plasticizers
inside the plastic may cause the cabinet to deform and cause the paint to peel off.
2
Introduction
Caring for the front panel
Handling the 3D glasses
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To
protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth
(wet/dry sheet type cloth, etc.). This may damage the surface of the front panel.
• Wiping with a hard cloth or using strong force may scratch the surface of the front
panel.
• Use a soft damp cloth to gently wipe the front panel when it is really dirty (It may
scratch the surface of the front panel when wiped strongly).
• If the front panel is dusty, use an anti-static brush, which is commercially available, to
clean it.
• Do not drop, exert pressure on, or step on the 3D glasses. Doing so may damage the
glass section, which may result in injury.
• Be careful not to trap your finger in the hinge section of the 3D glasses. Doing so
may result in injury.
• Pay special attention when children are using this product.
WARNING
To prevent the spread of fire, keep candles or other open flames
away from this product at all times.
3D glasses (AN-3DG40, sold separately)
Prevention of accidental ingestion
• Keep the accessory out of the reach of small children. Small children can accidentally
swallow these parts.
• If a child accidentally swallows any of these parts, seek immediate medical attention.
Do not disassemble
• Do not disassemble or modify the 3D glasses except when recycling the batteries.
Do not modify the 3D glasses.
Using the 3D glasses
• Do not drop, exert pressure on, or step on the 3D glasses. Doing so may damage the
glass section, which may result in the risk of injury.
• Use the 3D glasses only for the specified purpose.
• Do not move around while wearing the 3D glasses. The surrounding area appears
dark, which may result in falling or other accidents that may cause injury.
Caring for the 3D glasses
• Use only the cloth provided with the 3D glasses to clean the lenses. Remove dust
and soil from the cloth. Any dust or other soiling on the cloth may result in scratches.
Do not use solvents such as benzene or thinners as doing so may damage the
coating.
• When cleaning the 3D glasses, take care not to allow water or other fluids to come
into contact with the glasses.
• Always store the 3D glasses in the case provided when not in use.
• When storing the 3D glasses, avoid very humid or hot locations.
Viewing 3D images
• If you experience dizziness, nausea, or other discomfort while viewing 3D images,
discontinue use and rest your eyes.
• Do not use the 3D glasses if they are cracked or broken.
Caution for lithium battery
• Batteries must not be exposed to excessive heat such as direct sunlight or fire.
• Replace only with the same or equivalent type of battery. The battery may explode if
improperly replaced.
• Take care not to reverse the battery poles (+ and –) when loading the battery. Follow
the correct procedure when loading the battery. Loading the battery incorrectly may
damage the battery or cause it to leak battery fluid, which could result in a fire, injury
or damage.
3
Introduction
Optional accessories
Supplied accessories
Remote control unit ( x 1)
“AAA” size battery ( x 2)
The listed optional accessories are available for this LCD colour TV. Please
purchase them at your nearest shop.
• Additional optional accessories may be available in the near future. When purchasing,
please read the newest catalogue for compatibility and check the availability.
No.
Pages 7 and 9
Page 7
Stand unit ( x 1)
For 60/70 inch models
For 80 inch models
Page 5
Page 6
Wireless LAN USB adapter
(WN8522D 7-JU) ( x 1)
AC cord ( x 1)
(For 80 inch models only)
Page 65
Page 10
Initial setup guide
(printed document)
Important safety
precautions
(printed document)
4
Part name
Part
number
1
Wall mount bracket
(For 60/70 inch models)
AN-52AG4
2
3D glasses
AN-3DG40
Notes
The mark “c” indicates the location of
the centre of the TV screen.
Refer to the operation manual of the 3D
glasses for details regarding usage.
Preparation
Attaching the stand unit (for 60/70 inch models)
• Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will
prevent it from being damaged.
• Be sure that two or more persons attach the stand.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
• After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the TV.
• Do not remove the stand from the TV unless using a
wall mount bracket to mount it.
3 Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
5 Attaching the stand cover.
1 Insert the stand cover.
2 Insert and tighten the M4 screw (length:
• Make sure that the stand is firmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
8 mm) into the holes of the stand cover.
• Tighten the screw by pressing the bottom of the
stand base to the TV side.
Soft cushion
M4 screw
1 Confirm that there are 9 screws (four M6 screws,
four M5 screws and one M4 screw) supplied
with the stand unit.
2 Attach the supporting post to the stand base.
1 Insert the claws of the supporting post into
the stand base.
2 Secure the post and the base using the M6
screws (length: 16 mm) and a screwdriver.
4 Insert and tighten the M5 screws (length: 14 mm)
into the holes on the rear of the TV.
M5 screws
M6 screws
NOTE
• Tighten the screws to the holes of the mark “b”.
5
NOTE
• To detach the stand unit, perform the steps in reverse
order.
• A screwdriver is not supplied with this product.
• In the installation procedure, be careful not to catch
your fingers between the TV set and the floor.
• The TV can be rotated up to 20 degrees to the right and
left.
Preparation
Attaching the stand unit (for 80 inch models)
• Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will
prevent it from being damaged.
• Be sure that two or more persons attach the stand.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
• After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the TV.
• Do not remove the stand from the TV unless using a
wall mount bracket to mount it.
3 Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
5 Attaching the stand cover.
1 Insert the stand cover.
2 Insert and tighten the M4 screws (length:
• Make sure that the stand is firmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
• Instead of using a soft cushion, the cardboard box
that the TV is packed in can be assembled and
used as a work table (refer to the instructions on the
box to assemble the work table).
8 mm) into the holes of the stand cover.
• Tighten the screws by pressing the bottom of
the stand base to the TV side.
M4 screws
Soft cushion
1 Confirm that there are 14 screws (eight M6
screws, four M5 screws and two M4 screws)
supplied with the stand unit.
2 Attach the supporting post to the stand base.
1 Insert the claws of the supporting post into
the stand base.
2 Secure the post and the base using the M6
screws (length: 20 mm) and a screwdriver.
M6 screws
4 Insert and tighten the M5 screws (length: 14 mm)
into the holes on the rear of the TV.
M5 screws
NOTE
• Tighten the screws to the holes of the mark “b”.
6
NOTE
• To detach the stand unit, perform the steps in reverse
order.
• A screwdriver is not supplied with this product.
• In the installation procedure, be careful not to catch
your fingers between the TV set and the floor.
• The TV can be rotated up to 20 degrees to the right and
left.
Preparation
Using the remote control unit
Inserting the batteries
Before using the TV for the first time, insert the two supplied “AAA” size
batteries. When the batteries become depleted and the remote control unit fails
to operate, replace the batteries with new “AAA” size batteries.
Angle of the remote control unit
Use the remote control unit by pointing it towards the remote control sensor.
Objects between the remote control unit and sensor may prevent proper
operation.
1 Open the battery cover.
5m
2 Insert the two supplied “AAA” size batteries.
Remote control sensor
• Place batteries with their terminals corresponding to the (e)
and (f) indications in the battery compartment.
3 Close the battery cover.
Cautions regarding the remote control unit
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to
follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different
characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of
new batteries or cause chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries
can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to
storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove
the batteries from it.
• Do not expose the remote control unit to shock. In
addition, do not expose the remote control unit to
liquids, and do not place in an area with high humidity.
• Do not install or place the remote control unit under
direct sunlight. The heat may cause deformation of the
unit.
• The remote control unit may not work properly if the
remote control sensor of the TV is under direct sunlight
or strong lighting. In such cases, change the angle of
the lighting or the TV, or operate the remote control unit
closer to the remote control sensor.
Note on disposing batteries
The batteries provided contain no harmful materials such as cadmium, lead or
mercury.
Regulations concerning used batteries stipulate that batteries may no longer be
thrown out with the household rubbish. Deposit any used batteries free of charge
into the designated collection containers set up at commercial businesses.
7
Part names and functions
TV (front/side view)
TV (rear view) — continued
a (Standby/ON)
MAIN POWER
switch*3
MENU (Menu)
b (Input source)
:r/s
(Programme
[Channel])
SD CARD
(VIDEO STORE) slot
OUTPUT (Headphones/
AUDIO (L/R)) terminal*4
USB 1 port
Illumination LED*
1
i+/- (Volume)
HDMI 1 (HDMI/ARC)
terminal
OPC sensor (Page 36)
HDMI 2 (HDMI) terminal
Remote control sensor (Page 7)
This panel emits a signal towards the 3D glasses you wear when viewing 3D images.
Refer to page 76 for details.
I 3D mode: Blue illumination
2D mode: White illumination
RS-232C terminal
PC terminal
TV (rear view)
HDMI 3 (HDMI) terminal
HDMI 4 (HDMI/MHL)
terminal
EXT 1 (RGB) terminal
EXT 2 (VIDEO/AUDIO
(L/R)) terminal
C.I. (COMMON
INTERFACE) slot
EXT 3 (Component/
AUDIO (L/R)) terminal
USB 3 (WIRELESS LAN) port
USB 2 (HDD) port
ETHERNET (10/100) terminal
Satellite antenna terminal
(857 series only)
HDMI 2/PC AUDIO (L/R)
jack*2
DIGITAL AUDIO OUTPUT
terminal
Antenna terminal
J The HDMI 2 and PC terminals can both use the same audio input terminal (HDMI 2/PC AUDIO
(L/R)). However, the proper item must be selected in the “Audio select” menu (refer to page 47 for
details).
K When the MAIN POWER switch is turned off (a), the amount of electric power consumed will
be reduced to 0.01 W or less. However, unlike when unplugging the AC cord, the power is not
completely disconnected.
L When the headphone is connected to the OUTPUT terminal, the audio can be output from the
speakers (Page 48).
WARNING
• Excessive sound pressure from earphones and headphones can cause hearing loss.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high
volume levels.
NOTE
Important information:
Satellite services are only available for the 857 model series.
• Use a product with the specified dimensions for optimal connection to HDMI cable/USB device.
− HDMI: Body: (depth) 12 mm or less/(length) 32 mm or less
− USB: Body: (depth) 10 mm or less/(length) 57 mm or less
Connector: (depth) 7 mm or less
8
Part names and functions
Remote control unit
1
2
14
15
3
4
5
6
7
8
9
10
16
17
18
19
20
11
21
12
13
22
23
24
Important information:
Satellite services are only available for
the 857 model series.
1 >a (Standby/On) (Page 19)
2 ATV
Access conventional analogue TV mode.
DTV
Access digital TV mode.
SAT
Access satellite mode.
RADIO
DTV/SAT: Switch between radio and
data mode.
• When only data broadcasting (no radio
broadcasting) is transmitted by DVB,
the radio broadcasting will be skipped.
3 EXT MEDIA buttons
EXT MEDIA buttons are used for AQUOS
LINK functions and USB-recording
functions, etc.
• AQUOS LINK (Pages 31_34):
Interactively operate compatible
system devices using a single remote
control unit.
• USB-recording (Pages 51_54):
Record a programme you are
watching.
4 Numeric buttons 0_9
Set the channel. Enter desired numbers.
Set the page in teletext mode.
Inputting letters with the numeric
buttons is only available with MHP
services (858 series only).
• When the five Nordic countries
(Sweden, Norway, Finland, Denmark
or Iceland) are selected in the country
setting from initial auto installation
(Page 15), DTV services are four digits.
When another country is selected,
DTV services are three digits.
5 A (Flashback)
Return to the previously selected
channel or external input.
6 AV MODE (Page 36)
Select audio/video settings.
f (Wide mode) (Pages 46, 58 and 59)
Select a wide mode.
7 7 (Sound mode) (Page 20)
Select a sound multiplex mode.
8 i+/- (Volume)
Increase/decrease TV volume.
9 e (Mute)
TV sound on/off.
0 D (HOME)
Display the “HOME” screen for enjoying
Internet connection and Home network
functions, as well as performing settings
for the TV.
Q 3D (Pages 68_77)
Select between 3D and 2D image
viewing.
W a/b/c/d (Cursor)
Select a desired item.
;
Execute a command.
ATV/DTV/SAT: Display “CH list” when no
other “Menu” screen is running.
• “CH list” may not be displayed even
by pressing ; when executing the
MHP application (Page 26). If so, you
can display “CH list” from “HOME” >
“CH list”.
E>
ATV/DTV/SAT: Exit the “Menu” screen.
AQUOS NET+: Return to the start page.
R CONTROL (Pages 52, 54, 57 and 66)
Display a panel to operate some
functions on the screen.
T p (Display information) (Page 20)
Display the station information (channel
number, signal, etc.) on the screen.
P. INFO
Display programme information
transmitted through digital video
broadcasting (DTV/SAT only).
Y b (INPUT) (Page 19)
Select an input source.
9
U APP (Page 26)
Display the MHP application list (858
series only).
ECO (Standard/Advanced/Off)
(Page 40)
Select “Energy save” setting.
I m (Teletext) (Page 25)
ATV: Display analogue teletext.
DTV/SAT: Select MHEG-5 or teletext for
DTV/SAT.
O :r/s
ATV/DTV/SAT: Select the TV channel.
AQUOS NET+: Scrolls pages up/down.
P MENU
“Menu” screen on/off (Page 14).
A EPG (Pages 22_24)
DTV/SAT: Display the EPG screen.
S6 (Return)
ATV/DTV/SAT: Return to the previous
screen.
AQUOS NET+: Return to the previous
page (This may not function for some
services).
D Buttons for useful operations
[ (Subtitle) (Pages 25 and 45)
Switch subtitle languages on/off.
k (Reveal hidden teletext) (Page 25)
1 (Subpage) (Page 25)
3 (Freeze/Hold) (Page 25)
Freeze a moving image on the screen.
Teletext: Stop updating teletext pages
automatically or release the hold mode.
FR/G/Y/B (Colour) buttons
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g., EPG,
MHEG-5, MHP*, teletext).
* MHP is available on the 858 series
only.
Quick guide
Operation overview
Follow the steps below one by one when using the TV. Some steps may not be necessary
depending on your TV installation and connection.
1. Preparation — Connecting the TV
w For 60/70 inch models
2. Preparation — Setting the TV
w For 80 inch models
p
q
r
n
o
n
Press a on the TV (Page 19).
Run the initial auto installation (Page 15).
w Language setting
q
o
w Home/Store setting
w Country setting
q
w PIN setting
w Channel search setting
NOTE
• The cable tie can be moved from
• Place the TV close to the AC
outlet, and keep the power
plug within reach.
• Product shape varies in some
countries.
to
n
o
p
q
r
.
Plug the standard DIN45325 plug (IEC 169-2)
75 q coaxial cable.
Connect the satellite antenna cable.
Insert a CA card into the CI slot to watch scrambled
broadcasts (Page 12).
Plug in the AC cord.
Check that the MAIN POWER switch on the rear of the TV
is turned on (;).
*Important information:
Satellite services are only available for the 857 model series.
10
• Digital search
− Terrestrial
− Cable
• Analogue search
• Satellite search
Start searching channels
p
Congratulations!
Now you can watch TV.
• If necessary, adjust the antenna to attain maximum signal
reception (Page 18).
Quick guide
3. Daily operation
4. Advanced features
5. Enjoy additional features
1 Turn on/off the TV
1 Use USB-recording function
1 Connect external devices
(Page 19)
(Pages 52_54)
Connection overview
(Pages 27_32)
• You can turn on/off the
power using both the
remote control and the
TV.
• Be sure to turn off the TV and
any devices before making any
connections.
Switch input sources
(Page 19)
2 Switch between digital, satellite and
analogue broadcast
2 Enjoy photos, music and video stored
(Page 19)
in USB media/Home network
(Pages 55_58)
3 Change channels
3 Display a PC image on the TV screen
(Page 19)
(Pages 59_63)
• You can also select a
channel from “HOME” >
“CH list”.
4 Select a programme using EPG
4 Enjoy internet service* with the TV
(Pages 22_24)
(Pages 13 and 64_67)
* The following service is now
available:
• If the MAIN POWER
switch is switched off,
the EPG data will be
lost.
• YouTube™ (Page 13)
• Net TV (Pages 66–67)
2 Adjust TV settings and enjoy internet
service
5 Watch 3D images
(Pages 68_77)
(Pages 36_50)
• Some menu items are greyed
out in 3D mode. This is not a
malfunction.
• You can launch Internet
connection and Home
network functions, as
well as perform settings
for the TV from the
“HOME” screen.
11
Quick guide
Inserting the CA card into the CI
module
In order to receive coded digital stations, a common
interface module (CI module) and a CA card must be
inserted in the CI slot of the TV.
1 Carefully insert the CI module in the CI slot with
the contact side forward.
2 The logo on the CI module must be facing
outward from the rear of the TV.
Checking CI module information
Go to “TV Menu” > “Setup” > “Option” >
“CI setting” > “CI menu”.
• This menu is only available for digital stations.
• The content of this menu depends on the provider
of the CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords
here.
NOTE
• It takes a few minutes to certify the licence key when
you insert a CA card into the CI+ compatible CI module
for the first time. This process may fail when there is no
antenna input or you have never run “Auto installation”.
• The CI+ compatible CI module sometimes upgrades its
firmware. You may not receive any TV images before
upgrading. You can only use the power button during
upgrading.
• Copy protected content may not be output or may be
output with a copy control signal. The protect icon* is
displayed when P.INFO is pressed while watching copy
protected contents.
* Protect icon: X
• If the TV displays an update confirmation message for
the CA card while receiving CI+ compatible broadcasts,
follow the screen prompts.
• Make sure that the CI module is properly inserted.
• If the old CAM is used, authentication may fail. In such
cases, contact the contracted service provider.
Recording CAM PIN setting
When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN
code in advance.
1 Go to “TV Menu” > “Setup” > “Option” >
“CI setting” > “Recording CAM PIN setting”.
2 Enter the CAM PIN code.
NOTE
• If a PIN code is not entered or is entered incorrectly, the
programme will not be able to be recorded/played back.
12
CI plus 1.3 Standard
CI Plus is an advanced development of the DVB
Common Interface Standard.
1 Regarding security
There are some regulations in recording functions.
The playback of encrypted programmes is
strongly dependent on which CA module is
used. The playback of encrypted recordings may
sometimes not be possible, or only during limited
time. Programme providers, who use the CI Plus
standard, can assign different rights for their
broadcast programmes.
Exercise caution when using USB-recording to
record broadcast programmes (Pages 51–54).
2 Operator service list management (Operator
profile)
Under the 1.3 specification the CAM may provide
the channel listing parameters (channel number,
frequency etc.) and these can be updated while in
use.
Refer to “Operator profile” on page 21.
Quick guide
Using the HOME screen
You can easily launch this “HOME” screen to enjoy Internet connection and
Home network functions and to perform settings for the TV.
LCFONT
This product is embedded with LC Font technology, which was developed
by SHARP Corporation for clearly displaying easy-to-read characters on LCD
screens.
Tips:
HOME menu contents
Main information
display zone
Featured and
recommended
function zone
1 Display the HOME screen
Other function icons
Press D (HOME) and the “HOME” screen will be displayed.
2 Select an item
Press a/b/c/d to select the desired service or menu, and then press ;.
See the right column for details on the operations in the “HOME” screen.
3 Exit the HOME screen
The operation will exit the “HOME” screen if you press D (HOME) before it is
completed.
Main information display zone
Various information, including the time, currently displayed programming, and current
setting status are shown. Switching between the current setting status can be done
using the coloured buttons.
Featured and recommended function zone
Available and recommended functions are shown.
Other function icons
Other function icons are shown.
Regarding the instructions in the manual
In this manual, the following expression is often used in order to simplify
instructions.
• Go to “TV Menu” > “Setup” > ...
This indicates how to navigate through the Menu screen using the a/b/c/d
and ; buttons.
13
Quick guide
Using the Menu screen
Using Software keyboard
You need to call up the OSD to perform settings for the TV. The OSD for the
settings is called “Menu”. The “Menu” enables various settings and adjustments.
Use the software keyboard when you need to input text.
6
8
7
Display the Menu screen
n
Go to “TV Menu”.
• You can also display the Menu screen via the HOME menu screen (Page 13).
1
Selecting in the Menu
n
o
p
Press c/d to select the desired menu,
and then press ;. Press 6 to return to
the previous menu category.
Press c/d to select the desired submenu, and then press ;.
Press a/b to select the item you want to
select/adjust, and then press ;.
2
Caps
3
Done
EXAMPLE
4
Backlight
5
Menu
CH list
:Enter
Char.Set
Selecting options
q Press a/b or c/d to
configure the control for
improving TV viewing, and
then press ;.
9
Clear
Cancel
Cursor Left
SP
Caps
Char.Set
Delete
10
11
Cursor Right
Setup
1
:Back
Picture
AV mode
2
OPC
[Off]
Yes
No
Backlight
3D brightness boost
[Middle]
About the guide display
NOTE
3
• Refer to the guide display
below the menu bar to see
when to press the ; button.
4
5
The guide display below the menu bar shows
operations for the OSD.
• The bar above is an operational guide for the
remote control unit. The bar will change in
accordance with each menu setting screen.
CH list
:Select
Setup
:Enter
:Back
Char. Set
Changes character
set into the alphabet,
numbers, symbols, etc.
Caps
Changes characters to
capital/lower case.
Done
Confirm the entry.
Cancel
Abort input and close
the software keyboard.
R/G/Y/B (Colour)
buttons
Selects the coloured
items on the screen.
NOTE
• “Menu” options differ according to the selected input modes, but the operating
procedures are the same.
• Items with 4 cannot be selected for various reasons.
• Some items cannot be selected depending on signal types, optional settings or
connected devices.
6 Input cursor
Press c/d to move the
cursor when highlighted.
7 Input field
The text you enter is
displayed as you type
it in.
8 Character
Input characters by
using these buttons.
9 ?
Put a line break.
0 Clear
Erases the character
string.
• When the cursor is
somewhere in a line:
The character string to
the right of the cursor
will be erased.
• When the cursor is at
the right end of a line:
The entire line will be
erased.
Q Delete
If the cursor is at the
right end of a line,
this erases text one
character at a time.
• You can also delete
text by pressing 6
on the remote control
unit.
NOTE
• Depending on the application, there may be a different software keyboard than the one
indicated above.
• When inputting letters in MHP services, use the numeric buttons on the remote control
unit (858 series only).
14
Initial auto installation
4 Setting the country.
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Confirm the following before turning on
the power
E Is the antenna cable connected?
E Is the AC cord plugged in?
E Is the MAIN POWER switch turned on (;)?
Press a/b/c/d to select your country or area, and
then press ;.
• This setting screen only appears during the initial
auto installation.
5 Setting the PIN.
1 Press c/d to select “Yes”, and then press
;.
• When “No” is selected, the PIN code setting is
skipped.
2 Enter a four-digit number as a PIN using the
3 Enter the same four-digit number as in step
2 to confirm.
Press a/b/c/d to select the desired language, and
then press ;.
3 Selecting the location of the TV.
HOME
0–9 buttons.
4 Press ;.
• The initial auto installation wizard appears.
STORE
Analogue search
Satellite search
• Some functions may not display or be selectable
depending on the country setting or cable provider
selection.
Satellite services are only available for the 857 model
series.
2 Setting the OSD language.
Digital search
NOTE
Important information:
1 Press a on the TV.
6 Starting channel search.
NOTE
• When “France” or “Italy” is selected in the country
setting, the PIN code setting cannot be skipped.
• “0000” cannot be set as the PIN code.
• When the PIN code setting is skipped, the default PIN
code (“1234”) will automatically be set.
• To change the PIN setting, refer to Individual setting —
PIN (Page 44). To reset the PIN setting (PIN input will no
longer be needed), refer to Reset the PIN (Page 79).
Press c/d to select where you will use this TV, and
then press ;.
• The confirmation screen pops up only when
selecting “STORE”. Press c/d to select “Yes” or
“No”.
• HOME: “STANDARD” will be the default value for
the “AV mode” setting.
• STORE: “DYNAMIC (Fixed)” will be the default
value for the “AV mode” setting. If the “AV mode”
is changed, the TV will automatically switch back
to “DYNAMIC (Fixed)” when there is no operation
using the TV or remote control unit for 30 minutes.
• STORE: A demonstration image will be displayed
after initial auto installation is completed. If you
have chosen “STORE” by mistake, go to “TV
Menu” > “Setup” > “View setting” > “Reset” >
select “HOME” again.
15
Press a/b to select “Digital search”, “Analogue
search” or “Satellite search”, and then press ;.
• (857 series only) After performing “Digital search”
or “Analogue search”, the screen switches to the
“Satellite search” setting. You should then execute
“Yes” if you want to search for satellite channels.
• To watch both digital broadcasts and analogue
broadcasts, you should perform “Digital search” or
“Analogue search” from “Auto installation” under
the “Setup” menu (Page 41).
• When you select “Satellite search”, only satellite
broadcasts will be searched.
• If you want to search for more broadcasts, execute
“Additional search” from the “Programme setup”
menu (Pages 41_43).
NOTE
• If you turn off the power on the TV while performing a
channel search, the initial auto installation wizard will
not appear. The auto installation function allows you
to execute the installation again from “TV Menu” >
“Setup” > “View setting” (Page 41).
• The initial auto installation wizard will abort if you leave
the TV unattended for 30 minutes before searching for
channels.
• When “Italy” or “France” is selected in the country
setting, the default age restriction value is set to 18.
Initial auto installation
3 Press a/b to select “Search start”, and then
Digital broadcast setting
press ;.
Press c/d to select “Terrestrial” or “Cable”,
and then press ;.
4 Press c/d to select “Yes” to start searching
I
J
cable broadcasts, and then press ;.
5 The TV searches for, sorts and stores all the
Terrestrial
E
receivable TV stations according to their settings
and the connected antenna.
Cable
Searching for terrestrial broadcasts
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press 6.
• To abort the initial auto installation in progress,
press 6.
857 series only
K
After searching for cable channels, the screen
switches to the “Satellite search” setting (Page 17).
L
Menu
NOTE
• A region or service selection screen may display
depending on the country settings or cable providers
selections. Follow the screen prompts to make the
selections.
Scrambled
stations
Search method
857 series only
Start frequency
After searching for terrestrial channels, the screen
switches to the “Satellite search” setting (Page 17).
E Searching for cable broadcasts
Network ID
To change each item to the appropriate settings:
1 Press a/b to select
2
the menu, and then
press ;.
Press a/b/c/d or
0_9 to select or input
the appropriate item/
value, and then press
;.
Scrambled stations
Search method
[Yes]
[Channel]
Start frequency
Network ID
Symbol rate 1/
Symbol rate 2*1
Description
Specifies if you
need to add payTV services.
Specifies how
you search for
channels.*2
Selectable items
Yes, No
Channel,
Frequency, Quick
Set up “Symbol rate 2” if the cable provider uses
several symbol rates.
Details about the “Search method” items are as
follows:
_Channel: Extracts all information from a channel
(quick, but needs corresponding TV stations).
_Frequency: Checks every frequency in range (slow).
_Quick: All services are searched by one frequency.
This menu works only when your cable provider
provides the frequency and the network ID (e.g.,
Homing channel). When “Quick” is selected,
“Scrambled stations” is automatically set to “Yes”, and
“None” for the “Network ID” menu cannot be selected.
Set this to register only the specified network ID
without registering any special services.
The symbol rates are specified by the cable provider.
Analogue broadcast setting
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press 6.
From 47.0_858.0
MHz
Specifies the
network.*3
Input the value
received for
CATV.*4
None, 0_65535
1000_9000
16, 32, 64, 128,
256
None, 16, 32, 64,
128, 256
QAM
modulation 1
QAM
modulation 2
[None]
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
16
857 series only
After searching for analogue channels, the screen
switches to the “Satellite search” setting (Page 17).
Initial auto installation
Searching for satellite broadcasts
(857 series only)
Press a/b to select “Satellite search”, and then
press ;.
E
“Single satellite” setting
1 Press a/b to select “Single satellite”, and then
press ;.
2 Press a/b/c/d to select your favorite
satellite, and then press ;.
E
Search start:
DVB-S/S2 channel searching.
1 Press c/d to select “Yes”, and then press ;.
• To change the settings for “Scrambled stations”,
press a/b to select the item to be reconfigured
and then perform “Search start”.
Scrambled stations
Digital search
Atlantic Bird 1
Analogue search
Single satellite
2 satellites on toneburst switchbox
Max. 4 satellites on DiSEqC multiswitch
Communal satellite system
NOTE
• You can select the antenna connection method from the
four types. Consult your dealers before using a method
other than “Single satellite”.
Start search?
Euro Bird 1
Satellite search
• The antenna connection setting screen is displayed.
[Yes]
Search start
Yes
No
NOTE
• Follow the instructions on the screen for “2 satellites
on toneburst switchbox”, “Max. 4 satellites on DiSEqC
multiswitch” and “Communal satellite system” settings.
• To set multiple satellite channels, go to “Max. 4 satellites
on DiSEqC multiswitch”.
• When a power supply is needed for your satellite
antenna, follow the procedure below in order to supply
the voltage specified by your service provider, etc.:
Go to “TV Menu” > “Setup” > “View setting” > “Channel
settings” > “Antenna setup-DIGITAL” > “Satellite setup” >
“Change setting” > “Communal satellite system”.
17
2 The TV searches for and stores all the receivable
TV stations according to their settings and the
connected antenna.
• Select “Yes” to sort the search result in alphabetical
order.
• To abort the initial auto installation in progress,
press 6.
NOTE
• Scrambled stations: Specifies if you need to choose
pay-TV services.
• Follow the procedure to perform “Manual search” if you
want to configure the frequency or symbol rate and start
to search after performing the auto searching during the
initial auto installation.
− Go to “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Programme setup” > “Satellite
setting” > “Manual search”.
Initial auto installation
Checking signal strength and
channel strength (DVB-T/T2/C/S*/
S2*)
If you install a DVB-T/T2/C/S/S2 antenna for the first
time or relocate it, you should adjust the alignment
of the antenna to receive a good reception while
checking the antenna setup screen.
* 857 series only
E
4 Press a/b to select “Channel strength”, and
then press ;.
• You can input a specified frequency band using the
0_9 numeric buttons.
Channel strength of DVB-T/T2
Supply voltage
Signal strength
Channel strength
1 Go to “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Antenna setup-DIGITAL”.
press ;.
Signal strength for DVB-T/T2/C
Supply voltage
Signal strength
Supply voltage
Signal strength
Max.
MHz
Symbol rate
QAM modulation
Signal strength
CH No.
Signal strength
Current
Max.
Quality
Max.
Quality
Current
Max.
Frequency
Current
Max.
Max.
Channel strength of DVB-S/S2
Signal strength for DVB-S/S2
Signal strength
Channel strength
Signal strength
Channel strength
Frequency
Band
Max.
Current
Max.
Quality
Quality
Current
Vert/Low
Signal strength
Signal strength
Current
MHz
Symbol rate
Max.
Current
18
Max.
maximum possible values for “Signal strength”
and “Quality” are obtained.
NOTE
• The values of “Signal strength” and “Quality” indicate
when to check the appropriate alignment of the
antenna.
Supplying power to the antenna
You must supply power to the antenna in order
to receive digitally/terrestrially broadcast stations
after connecting the antenna cable to the antenna
terminal on the rear of the TV.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Antenna setup-DIGITAL” >
“Supply voltage”.
2 Press c/d to select “On”, and then press ;.
Channel strength of DVB-C
Channel strength
Current
CH No.
Signal strength
Current
Checking signal strength
3 Press a/b to select “Signal strength”, and then
MHz
Quality
setup”, and then press ;.
Channel strength
Frequency
Current
2 Press a/b to select “Digital setup” or “Satellite
E
5 Position and align the antenna so that the
Checking channel strength
Watching TV
Daily operation
Switching on/off
Turning on/off the power
Switching between digital, satellite*
and analogue broadcasts
Watching digital
broadcasts
Watching analogue
broadcasts
Selecting an external video source
Once the connection is made, press b to display
the “INPUT” screen, and then press b or a/b to
switch over to the appropriate external source with
;.
CH list
Watching satellite
broadcasts
INPUT
TV
1 Turn on (;)/off (a) the MAIN POWER switch on
2
the rear of the TV (Page 8).
To turn on/off the TV, press a on the TV or >a
on the remote control unit.
NOTE
• When turning off the power using the MAIN POWER
switch on the rear of the TV, EPG data will be lost.
Standby mode
E To standby mode
If the MAIN POWER switch on the rear of the TV is
turn on (;), you can switch it to standby by pressing
a on the TV or >a on the remote control unit.
E Switching on from standby
From standby, press a on the TV or >a on the
remote control unit.
Switchable
*Important information:
Satellite services are only available for the 857 model
series.
NOTE
• If multiple satellite services are set, each time you press
the SAT button the channel switches as follows.
SAT1
SAT2
SAT4
SAT3
Changing channels
With :r/s
With 0_9
NOTE
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the AC outlet
or turn off (a) the MAIN POWER switch on the rear of
the TV (Page 8).
• A small amount of electric power is still consumed even
when the MAIN POWER switch is turned off (a) (Page 8).
19
NOTE
• You can also select an external video source from
“HOME” > “Input change”.
• Only HDMI inputs which are not set for “Input skip”
(Page 47) and properly connected inputs can be selected.
Watching TV
Selecting a sound mode
E DTV/SAT mode
If multi sound modes are received, each time you
press 7 the mode switches as follows.
Audio (ENG)
L/R
STEREO
NOTE
R
• When no signal is input, the sound mode will display
“MONO”.
L
Audio (ENG)
CH A
CH B
Audio (ENG)
A2 TV broadcasts selection
Signal
Selectable items
Stereo
STEREO, MONO
Bilingual CH A, CH B, CH AB
Monaural MONO
LR
CH A
CH AB
L/R
L
MONO
DTV mode
ATV mode
Audio (ENG)
STEREO
Video
Subtitle
Off
>> New information
LR
NOTE
I
• The sound mode screen disappears in six seconds.
• Selectable items vary depending on the received
broadcasts.
• When the “Audio description setting” menu is set
to “On”, the audio description sound is selected
depending on the main audio.
1 Select a TV channel (the time information is
2
Auto
MONO
Subtitle
Four digit numbers (e.g., 0001) are displayed after
selecting the five Nordic countries in the country
setting or for some cable operators. Also, operator
profiles use four digits.
4
automatically captured).
Press p. The channel display will appear on the
TV.
Press p again within the several seconds
that the channel display is on the screen. Time
information will be shown in the lower-right
corner of the screen for several seconds.
Even when you change the TV channel, you can
display the time information with steps 2 and 3
above.
Operation without a remote control unit
You can operate the menu settings using the TV
control buttons.
SAT mode
E ATV mode
Each time you press 7, the mode switches as
shown in the following tables.
NICAM TV broadcasts selection
Signal
Selectable items
Stereo
NICAM STEREO, MONO
NICAM CH A, NICAM CH B, NICAM CH AB,
Bilingual
MONO
Monaural NICAM MONO, MONO
• Skip step 1 if receiving DTV/SAT broadcasts.
You can display the channel information by pressing
p on the remote control unit.
STEREO
R
NOTE
3
Channel display
Press c/d to select L or R sound when the
STEREO or DUAL MONO screen is displayed.
Audio (ENG)
E Time display in channel information
You can display the time information included in
DTV, SAT and teletext broadcasts.
Audio (ENG)
STEREO
Video
Subtitle
Off
>> New information
J
K
Satellite channels are displayed by four digit numbers
(e.g., 0001).
You can set four satellite stations to “SAT1”, “SAT2“,
“SAT3“, “SAT4”.
20
TV control buttons
Remote control buttons
@
@
b
;
:r/s
a/b
i+/-
d/c
Watching TV
Favourite Channel Information
Selecting channels from “My favourite” list
1 How to move between “My favourite” list and
“CH list”.
Before installation
This function allows you to group your favourite
channels in a separate list. Pre-setting “My
favourite” in advance allows you to select your
favourite channels more conveniently.
NOTE
• “My Favourite” can only be used for DTV and SAT(*)
modes, a separate list will be stored for each input
source DTV, SAT1/2/3/4.
• The maximum number of channels you can register in
“My favourite” is:
− 50 for TV broadcast which will be allocated 001-050,
as favourite channel numbers
− 50 for Radio broadcast which will be allocated 051100, as favourite channel numbers and
− 50 for Data broadcast which will be allocated 101150, as favourite channel numbers
* 857 series only
How to add / remove / move your favourite
channels
Press the ; button to display the on-screen
channel list.
• If you have already set your favourite channels,
you will be able to see “CH list” or “My favourite”
depending on your previous selection.
Function buttons used to edit “My favourite”
Buttons
R button
B button
Description
Add to “My favourite” list or remove
from “My favourite” list.
The “
” mark will be added to or
removed from the selected channel.
Move channel position in “My
favourite” list. (“My favourite”
channel numbers will be sequentially
allocated.)
NOTE
1 Press the ; button when you watching DTV
or SAT to bring up the “CH list”.
“My favourite”
list.
Move up and down the displayed channel list by
using the a/b keys then press the ; button
to select the desired channel.
2 Press the d key and select
2
NOTE
• When watching your favourite channels via “My
favourite” list, you can directly select other favourite
channel by entering the favourite channel number on the
remote control.
• Selecting the EPG function while using “My favourite”
channel list, will only show details for the favourite
channels you have added. (To view details of all
available channels via the EPG, please switch back to
“CH list” mode from “My favourite” by following the
steps shown in 1 (1) and reselect “CH List” before
pressing the EPG button.)
Operator profile
In case your CI Plus CAM supports Operator Profile,
your CAM will inform you and guide you through the
Operator Profile installation.
When operator's profile is added by the CAM, it will
be displayed in the CH list menu. Each profile will be
stored as an independent list in the TV.
You can delete operator profile you added.
Go to “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Programme setup” >
“Operator profile management”.
NOTE
• The TV supports 2 operator profiles.
• Operator profile can have mixed services such as T/C/
S1/S2/S3/S4, but will only be displayed based on the
network and media type you select.
• If you delete a channel via the “Manual adjust” option
(“TV Menu” > “Setup” > “View setting” > “Channel
settings” > “Programme setup” > “Digital setting” >
“Manual adjust”), this will be deleted from both the “CH
list” and “My favourite” list.
21
Watching TV
EPG
Option
EPG is a programme list that is displayed on the
screen. With the EPG, you can check the schedule
for DTV/SAT/RADIO/DATA, view detailed information
about them and tune to an event currently on-air.
Useful settings for using EPG
View setting
EPG
If you want to use the EPG for digital stations,
select “Yes”. The EPG data must be automatically
captured while the TV is in standby mode. After
setting to “Yes”, it may take some time to turn off
the power using the remote control unit or the TV
due to the data capture process.
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Standby search” > “EPG”.
Genre icon setup
You can grey out or place a mark on desired genres
and smoothly search for programmes you frequently
watch.
1 Go to “TV Menu” > “Setup” > “Option” > “EPG
setup” > “Genre icon setup”.
2 Press a/b to select the desired genre, and then
press ;.
E Genre icon list
Icon
Genre
Music/Ballet/Dance
News/Current
affairs
Arts/Culture
(without music)
Social/Political
issues/Economics
Education/Science/
Factual topics
Show/Game show
Sports
• If the MAIN POWER switch is switched off, the EPG
data will be lost.
Children’s/Youth
programmes
Display range setup
The “Display range setup” allows you to select three
types of time spans for display on the screen.
Go to “TV Menu” > “Setup” > “Option” > “EPG
setup” > “Display range setup”.
Mode 1
(Wide angle)
Mode 2
(Zoom)
Mode 3
(Vertical angle)
Genre
Movie/Drama
NOTE
Option
Icon
Leisure hobbies
3 Press a/b to select a level to pick out or
search for programmes you want to watch
(“Standard”, “Light”, “Remark”).
Item
Displays six hours of programme
information.
Displays three hours of programme
information.
Changes to the EPG display format
with a vertical time span.
22
Watching TV
Selecting a programme using EPG
4 Search a programme in a
category
5 Search for a programme by
date/time
1 Press G.
2 Press a/b to select the desired
1 Press Y.
2 Press c/d to select the desired
The illustrations on this page are explained using three digit services.
Display/Close the EPG screen
Press EPG.
AM
Programme info.
PM
Search by genre
Search by date
Timer list
3
genre, and then press ;.
Press a/b to select a programme
you want to watch, and then press
;.
time span, and then press ;.
Today
0 AM - 6 AM
Enter
• Refer to page 22 for the genre setting.
Movie/Drama
Select
Enter
Back
News/Current affairs
Exit
Show/Game show
Sports
Children’s/Youth programmes
NOTE
Music/Ballet/Dance
• You can also display the EPG screen from “TV Menu” > “EPG” > “EPG”.
Select a programme
1 Select the time span
Press c/d to select the time span
you want to search.
3 Check programme
information
NOTE
• You can also display this setting screen
from “TV Menu” > “EPG” > “Search by
genre”.
6 AM - 0 PM
0 PM - 6 PM
Back to EPG
Enter
6 PM - 0 AM
+1 Week
3 Press a/b to select the desired
programme, and then press ;.
NOTE
• You can also display this setting screen
from “TV Menu” > “EPG” > “Search by
date”.
6 Display the timer list for TV
programmes
• Continue to press d to display
programmes in the next time span.
2 Select the desired
programme
Press a/b to select the desired
programme.
• If a or b are displayed on the left of
the services, continue to press a/b
to display next or previous screen.
Press B.
• Refer to page 24 for the timer setup.
1 Press a/b/c/d to select the
programme you want to check.
2 Press R, and then press ; to tune
to the selected programme.
23
Watching TV
Timer setup using EPG
Cancelling the timer setup
The TV can be switched to a programme or start
recording for USB-recording at the set time.
1 Press EPG.
2 Press a/b/c/d to select the programme you
want to set, and then press ;.
Back to EPG
Watch
Next
Record
No
3 Press c/d to select “Watch” or “Record”, and
1 Press EPG.
2 Press a/b/c/d to select the programme with
timer setup, and then press ;.
3 Press c/d to select “Cancel”, and then press ;.
4 Press c/d to select “Yes”, and then press ;.
E Cancelling using B button on the
remote control unit
1 Press EPG.
2 Press B to display the timer setup list.
3 Press a/b to select the programme you want
then press ;.
• If you select “No”, the TV returns to the EPG screen.
4 Press c/d to select “Yes”, and then press ;.
• The selected TV programme is marked with an icon.
4
5
to cancel timer setup, and then press ;.
Press c/d to select “Cancel”, and then press ;.
Press c/d to select “Yes”, and then press ;.
5 Press ; to select “Back”.
NOTE
• You cannot select “Record” when the registered USB
HDD is not connected to the USB port.
• A combined total of 16 timer settings (“Watch” and
“Record”) can be set.
*Important information:
A CAM (CI Plus v1.3) PIN code may be necessary to
record broadcasts scrambled due to parental rate
settings.
When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN code
in advance (Page 12).
If a CAM PIN code is not entered or is entered
incorrectly, the programme may not be able to be
recorded/played back.
24
Watching TV
NOTE
Teletext
• Teletext will not work if the selected signal type is RGB
(Page 47).
• Teletext will not work in 3D mode.
What is teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your
TV receives teletext signals broadcast by a TV
network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.
Turning teletext on/off
1 Select a TV channel or external source providing
Buttons for teletext operations
Buttons
:r/s
Numeric
buttons 0_9
Colour
(R/G/Y/B)
a teletext programme.
2 Press m to display the teletext.
• Many stations use the TOP operating system, while
some use FLOF (e.g., CNN). Your TV supports both
these systems. The pages are divided into topic
groups and topics. After switching on the teletext,
up to 2,000 pages are stored for fast access.
• If you select a programme with no teletext signal,
“No Teletext available” displays.
• The same message displays during other modes if
no teletext signal is available.
TELETEXT
k (Reveal
hidden
teletext)
3 (Freeze/
Hold)
[ (Subtitle
for teletext)
TELETEXT
1 (Subpage)
• Each time you press m, the screen switches as
shown above.
• Press m again to display the teletext on the right
screen and the normal image on the left screen.
;
Description
Increase or decrease the page number.
Directly select any page from 100 to
899 by using the 0_9 numeric buttons.
Select a group or block of pages
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding colour (R/G/Y/B) on
the remote control unit.
Reveal or hide hidden information such
as an answer to a quiz.
Stop updating teletext pages
automatically or release the hold mode.
Display the subtitle or exit the subtitle
screen.
• Subtitles will not be displayed when
the service does not contain subtitle
information.
Reveal or hide subpages.
• Move to the previous subpage (R).
• Move to the following subpage (G).
• These two buttons are shown on the
screen by the symbols “e” and “f”.
Display the top menu.
• The top menu will not be displayed
when the service does not support
top menus.
25
Watching TV
MHEG-5 application (UK only)
Some services bring you programmes with the
MHEG application encoded, letting you experience
DTV interactively. When provided, the MHEG-5
application will start when you press m.
NOTE
• MHEG may not be displayed properly in 3D mode.
• You can view some MHEG-5 content even if you do not
perform “Network setup”. Furthermore, “Network setup”
allows you to view additional content such as interactive
content from “HOME” > “Network setup”.
• You cannot view MHEG-5 content when MHEG-5
content is not broadcast even if you perform the
appropriate “Network setup”. Carefully check the
broadcast programme.
MHP application (858 series only)
If the TV is installed for Italy, MHP (Multimedia Home
Platform) is active. If the channel you are currently
watching provides MHP service, you can enjoy a
variety of MHP services.
View setting
Data service setting
Set the MHP/Hbb service starting settings (“Auto”,
“Manual”, “Off”).
Go to “TV Menu” > “Setup” > “View setting” >
“Data service setting”.
NOTE
• If “Data service setting” is set to “Auto”, the TV will load
the MHP/Hbb pages automatically.
• To avoid automatic loading, you can set to “Manual” or
“Off”.
• Subtitles for teletext may not display when MHP/Hbb
service is started. In such cases, set to “Off”.
• “Manual” can be set only for Italy.
Open MHP/Hbb TV pages
If the channel you are currently watching provides
data service, you can enjoy MHP/Hbb content.
E When “Data service setting” is set to
“Auto”
NOTE
• MHP may not be displayed properly in 3D mode.
• You can view some MHP content even if you do not
perform “Network setup”. Furthermore, “Network setup”
allows you to view additional content such as interactive
content from “HOME” > “Network setup”.
Hbb TV application
If the channel you are currently watching provides
HbbTV service, you can enjoy a variety of services.
NOTE
• This application is not available when “UK” or “Italy” is
selected for the country setting.
• HbbTV may not be displayed properly in 3D mode.
• You need to perform “Network setup” to enjoy HbbTV
application. Please navigate “HOME” > “Network
setup”.
Press R to display the data service screen.
NOTE
• After changing the channel, please wait momentarily
until “HbbTV” icon is displayed on the screen (HbbTV).
E
When “Data service setting” is set to
“Manual” (Italy only)
1 Press APP to display the MHP application
list.
2 Press a/b/c/d to select a desired service,
and then press ;.
3 Press R to display the data service screen.
26
Using data service
1 Press a/b/c/d to select a desired option,
and then press ;. The selected service will be
started.
NOTE
• Operations vary depending on the MHP/Hbb
application.
• If a certain function appears on the screen, you can use
the offered function by pressing the colour buttons.
• Text can be inputted using the numbers and letters
printed on the numeric buttons on the remote control
unit.
2 If you press END, data service will close.
Connecting external devices
Introduction to connections
ø 3.5 mm stereo minijack cable
The TV is equipped with the terminals as shown
below. Find the cable corresponding the TV’s
terminal and connect the device.
E Before connecting ...
HDMI device
(Page 28)
DVI/HDMI cable
HDMI-certified cable
• Be sure to turn off the TV and any devices before
making any connections.
• Firmly connect a cable to a terminal or terminals.
• Carefully read the operation manual of each external
device for possible connection types. This also helps
you get the best possible audiovisual quality to
maximise the potential of the TV and the connected
device.
HDMI-certified cable
Game console or
camcorder (Page 30)
Connection method for other devices
w PC
AV cable
Æ Page 59
w USB HDD
Component cable
Æ Page 51
Video recording device
(Pages 29–30)
w USB memory
Æ Page 55
Audio cable
w Internet
Æ Pages 64 and 65
SCART cable
Audio cable
or
Optical audio cable
27
Audio device
(Page 30)
Connecting external devices
DVI/HDMI conversion
Video connections
Using a DVI/HDMI cable, the digital video signals of a DVD can also be played
via the compatible HDMI connection. The sound must be fed in additionally.
HDMI connection
• When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in
clearly.
• Both HDMI and DVI use the same HDCP copy protection method.
Example of connectable devices
E DVD player/recorder
E Blu-ray player/recorder
E Game console
E When using the HDMI 2 terminal
You must set the audio signal input source depending on the type of HDMI
cable connected (refer to page 47 for details).
HDMI-certified cable
1 Press b to select “HDMI 2” from the “INPUT” menu, and then press
;.
2 Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio
select” > select “HDMI”.
DVI/HDMI cable
1 Press b to select “HDMI 2” from the “INPUT” menu, and then press
;.
2 Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio
select” > select “HDMI + Analogue”.
The HDMI connections permit digital video and audio transmission via a
connection cable from a player/recorder. The digital picture and sound data are
transmitted without data compression and therefore lose none of their quality.
Analogue/digital conversion is no longer necessary in the connected devices,
which also would result in quality losses.
NOTE
n
o
p
• If a connected HDMI device is AQUOS LINK compatible, you can take advantage
of versatile functions (Pages 31_34).
• Video noise may occur depending on the type of HDMI cable used. Make sure to use a
certified HDMI cable.
• When playing the HDMI image, the best possible format for the picture will be detected
and set automatically.
• An ARC (Audio Return Channel) compatible audio receiver must be connected to the
HDMI 1 terminal with an ARC-compatible cable.
• All HDMI terminals support 3D image signals.
Supported video signal
576i, 576p, 480i, 480p, 1080i, 720p, 1080p
See page 61 for PC signal compatibility.
Supported audio signal
Linear PCM, sampling rate 32/44.1/48kHz.
Dolby Digital, DTS
n
o
p
ø 3.5 mm stereo minijack cable (commercially available)
DVI/HDMI cable (commercially available)
HDMI-certified cable (commercially available)
28
Connecting external devices
SCART connection
Y
PB
PR
(CB)
(CR)
Component connection
Example of connectable devices
Example of connectable devices
E VCR
E DVD player/recorder
E VCR
E DVD player/recorder
You will enjoy accurate colour reproduction and high quality images through the
EXT 3 terminal when connecting a DVD player/recorder or other device.
o
n
n
n
SCART cable (commercially available)
NOTE
• Regarding the external output:
− You can record programmes viewed on the TV with an external recording device
by connecting the external output of the TV with an SCART cable (commercially
available).
− If you change TV channels during recording from the external devices or turn off the
power on the TV, the recorded content may change or be interrupted.
− The external output may not be performed depending on the status of use.
n
o
29
Component cable (commercially available)
Audio cable (commercially available)
Connecting external devices
Audio connections
VIDEO connection
Speaker/amplifier connection
Example of connectable devices
E
E
E
E
VCR
DVD player/recorder
Game console
Camcorder
Connect an amplifier with external speakers as shown below.
E Connecting an amplifier with digital/analogue
audio inputs
n
You can use the EXT 2 terminal when connecting to a game console, camcorder,
a DVD player/recorder or other device.
o
n
o
Stereo conversion cable (for analogue audio) (commercially available)
Optical audio cable (for digital audio) (commercially available)
* This terminal is also used for headphones. Reduce the volume before using
headphones. Overwhelming sound may damage your hearing.
NOTE
n
• If the image is not in sync with the audio, check the settings of the connected surround
system.
E
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and external speakers
as shown, you should set an audio output format compatible with the
programme you are watching or the device connected.
Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Digital
audio output” > select “PCM” or “Bitstream”.
NOTE
n
• When set to “Bitstream”, Dolby Digital is output when the Dolby Digital or Dolby
Digital Plus audio formats are received or DTS is output when DTS audio formats
are received. When set to “PCM”, PCM is output no matter what audio formats are
received.
• When set to “Bitstream”, HE-AAC audio formats can be output as Dolby Digital.
• When set to “Bitstream”, Dolby Digital Plus can be output as Dolby Digital.
AV cable (commercially available)
30
AQUOS LINK
Controlling HDMI devices using
AQUOS LINK
E What is AQUOS LINK?
Using the HDMI CEC protocol, with AQUOS LINK
you can interactively operate compatible system
devices (AV amplifier, DVD player/recorder, Blu-ray
player/recorder) using a single remote control unit.
NOTE
• AQUOS LINK-compatible AQUOS AUDIO speaker
system and AQUOS recorder are scheduled to be on
sale after the release of this TV.
• AQUOS LINK does not work while using USB-recording
functions.
E
What you can do with AQUOS LINK
w One touch recording (DTV/SAT only)
You do not have to search for the remote control unit
of your recording device. Press the REC E or REC
STOP H buttons to start/stop recording what you
see on the recorder.
w One touch play
When the TV is in standby mode, it will automatically
turn on and play back the image from the HDMI
source.
w Single remote control operation
AQUOS LINK automatically recognises connected
HDMI devices and you can control the TV and the
devices as if using a universal remote control unit.
w Operating title list of external devices
In addition to displaying the TV’s own timer list
(Page 23), you can also call up the external player’s
top menu or AQUOS BD player’s/AQUOS recorder’s
title list provided that the devices support AQUOS
LINK.
31
w Multiple control of HDMI devices
You can select which HDMI device to operate using
the “Link operation” menu.
NOTE
• When you use AQUOS LINK, make sure to use a
certified HDMI cable.
• Point the remote control unit toward the TV, not to the
connected HDMI device.
• Video noise may occur depending on the type of HDMI
cable used. Make sure to use a certified HDMI cable.
• Up to three HDMI recording devices, one AV amplifier
and three players can be connected using this system.
• These operations affect the HDMI device selected
as the current external source. If the device does not
operate, turn on the device and select the appropriate
external source using b.
• When you insert/remove HDMI cables or change
connections, turn on all connected HDMI devices
before turning on the TV. Confirm that picture and audio
are correctly displayed/output by selecting “HDMI 1”,
“HDMI 2”, “HDMI 3” or “HDMI 4” from the “INPUT”
menu.
Regarding “Select recording device”
Select the device for recording from connected
devices.
NOTE
• This function enables you to select either the USB HDD
for USB-recording use or the HDMI device with CEC
protocol.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Select recording device”.
2 Select the device for recording using the REC E
button on the remote control unit.
• Select “USB HDD” when using the REC E button
for USB-recording.
• Select “HDMI device” when using the REC E
button for recording to the HDMI device.
3 Press the 6 (Return) to end the operation.
AQUOS LINK
AQUOS LINK connection
First connect the AQUOS AUDIO speaker system or an AQUOS BD player/
AQUOS recorder that supports the HDMI CEC protocol.
Connecting an AQUOS BD player/AQUOS recorder via the AQUOS
AUDIO speaker system
AQUOS BD player/AQUOS recorder
n
o
Connecting an AQUOS BD player/AQUOS recorder only
AQUOS AUDIO speaker system
HDMI-certified cable (commercially available)
Optical audio cable (commercially available)
AQUOS BD player/AQUOS recorder
n
* The ARC (Audio Return Channel) function works only when using the HDMI 1 terminal.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, turn on the
power of the TV after all relevant devices’ power have been turned on. Change the
external input source by pressing b, select the appropriate external source and verify
the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
32
HDMI-certified cable (commercially available)
AQUOS LINK
AQUOS LINK setup
Basic operation
Go to “TV Menu” > “Link operation” >
“AQUOS LINK setup” > select the menu you
want to set.
AQUOS LINK control
Set to “On” to enable HDMI CEC functions.
Auto power on
If this is activated, the one touch play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image
from the HDMI source.
NOTE
• The factory default for this item is “Off”.
Operating an AQUOS LINK device
Using genre info.
This function allows you to automatically switch
to the appropriate sound mode depending on the
genre information included the digital broadcast.
AQUOS LINK allows you to operate the HDMIconnected device with a single remote control unit.
Audio return channel (ARC)
If this function is set to “Auto”, the TV can send
audio data for video content shown on the TV
to a connected audio device with just one ARCcompatible cable. Using this function eliminates the
need to use a separate digital or analogue audio
cable.
Connection for using “Audio return channel”
• You need to use ARC-compatible cables/devices and
connect to the HDMI 1 terminal to activate this function.
The connection method is the same as Connecting an
AQUOS BD player/AQUOS recorder via the AQUOS
AUDIO speaker system (Page 32).
Selecting recorder
Here, you can select a recorder for the recording
from several connected recorders.
1 Press I to start playback of a title.
• See the section Top menu/title list if you want
to start playback using the list of the titles in the
AQUOS BD player/AQUOS recorder.
2 Press J to fast forward.
Press G to reverse.
Press REC E to start recording.
Press REC STOP H to stop recording.
Press H to stop.
Press F to pause.
Press B to turn the HDMI-connected device
on/off.
NOTE
• Refer to Regarding “Select recording device” (Page 31),
when the buttons for AQUOS LINK devices do not work.
NOTE
• If you have connected the AQUOS AUDIO speaker
system between the TV and an AQUOS recorder, the
external source’s indication changes (e.g., from “HDMI 1”
to “HDMI 1 (Sub)”).
AQUOS LINK menu
You can select the AQUOS LINK menu from the
“Link operation” menu to arrange the settings for
sound or an external device.
Selecting channel key
Recorder power on/off
This function allows you to select the channel of
the connected HDMI device using the TV’s remote
control unit.
1 Press a/b to select the input source of the
connected HDMI device you want to control
using the TV’s remote control unit, and then
press ;.
2 Press c/d to select “On”, and then press ;.
You can call up the CEC-compatible recorder’s EPG
and preset timer recordings using the TV’s remote
control unit.
1 Press a/b to select “Recorder power on/off”,
and then press ;.
• The external input source switches and the
recorder’s EPG is displayed.
2 Select the programme to record.
• Refer to the operation manual of the recorder for
details.
33
AQUOS LINK
Top menu/title list
This section explains how to play back a title in the
AQUOS BD player/AQUOS recorder.
1 Press a/b to select “Top menu/title list”, and
then press ;.
• The linked recorder now powers on and the TV
automatically selects the appropriate external input
source.
• The title list data from the connected AQUOS BD
player/AQUOS recorder displays.
2 Press @ to hide the menu screen to
operate a/b/c/d buttons.
3 Select the title with a/b/c/d, and then press
PLAY I.
Setup menu
You can call up the menu of an HDMI CECcompatible external device (player, recorder, etc.)
using the “Setup menu” function.
Press a/b to select “Setup menu”, and then
press ;.
NOTE
• If a connected device does not have this function
or the device is in a status where the menu cannot
be displayed (recording, entering standby, etc.), this
function may not be available.
Media change
If your recorder has multiple storage media, select
the media type here.
1 Press a/b to select “Media change”, and then
press ;.
2 Select the desired medium, such as DVD
recorder or HDD. The media type changes every
time you press ;.
Recorder EPG
Model select
You can call up the CEC-compatible recorder’s EPG
and preset timer recordings using the TV’s remote
control.
1 Press a/b to select “Recorder EPG”, and then
press ;.
• The external input source switches and the
recorder’s EPG is displayed.
2 Select the programme to record.
• Refer to the operation manual of the recorder for
details.
Change audio output device
By AQUOS audio SP
You can choose to listen to the TV sound only from
the AQUOS AUDIO speaker system.
Press a/b to select “By AQUOS audio SP”,
and then press ;.
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the
AQUOS AUDIO speaker system is audible.
• Audio description sound is not available.
By AQUOS SP
You can choose to listen to the TV sound only from
the AQUOS TV speaker system.
Press a/b to select “By AQUOS SP”, and then
press ;.
Sound mode change
You can manually change the AQUOS AUDIO
speaker system’s sound mode.
1 Press a/b to select “Sound mode change”.
2 The sound mode changes every time you press
;.
• Refer to the operation manual of the AQUOS AUDIO
speaker system for details.
34
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
Press a/b to select “Model select”, and then
press ;. The HDMI device changes every time
you press ;.
AQUOS LINK
E Auto Power On
When an MHL-compatible device is connected to the
TV, the TV turns on automatically.
Using a Smartphone with the TV
This function enables you to connect the TV to a smartphone that supports
Mobile High-Definition Link (MHL) using an MHL-compatible cable.
To connect the TV to your MHL-compatible smartphone, be sure to use an MHLcompatible cable (commercially available).
• This function operates when “AQUOS LINK Control” is set
to “On”. (See page 33.)
E Auto Input Selection
When an MHL-compatible device is connected while
the TV is on, the input mode is selected automatically.
• You can view pictures and video on a large screen.
• You can play back music files.
• This function operates when “AQUOS LINK Control” is set
to “On”. (See page 33.)
E Operation Using the Remote Control
The remote control of the TV can be used to operate a
portable device.
• a/b/c/d, ;, >, 0-9, etc.
• The operations vary depending on the connected
equipment and content being viewed.
MHL-compatible cable
HDMI 4 terminal (Rear side)
NOTE
• An MHL-compatible portable device is required to use this function. Connect the device
to the HDMI 4 terminal.
• This product incorporates MHL 1.
35
Basic adjustment
Picture settings
Go to “TV Menu” > “Setup” > “Picture”.
AUTO
Menu
CH list
:Enter
Setup
STANDARD
:Back
MOVIE
Picture
Clear Picture Processing
GAME (Standard/
High motion)
PC*1
OPC
USER
AV mode
[Off]
Backlight
x.v.Colour*2
Picture
DYNAMIC
AV mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
Press a/b to select the desired mode, and
then press ;.
• You can also switch the mode on the “Picture” and
“Audio” menu screen by pressing #.
DYNAMIC (Fixed)
STANDARD (3D)
MOVIE (3D)
GAME (3D)
I
J
Item
The TV automatically sets the
appropriate selection from the “AV
mode” menu depending on the
lighting conditions and the type of
programme watched.
For a highly defined image in a
normally bright room.
For viewing a movie in a darkened
room.
Picture
Clear Picture Processing
Processes noise included in broadcast signals to
improve picture quality.
Item
Improves picture quality through Clear
Picture Processing at a level above
“Middle”.
High
For playing of video games.
Middle
For PC.
Allows you to customise settings as
desired. You can set the mode for
each input source.
Produce realistic colour on the TV
screen unlike any other signal.
For a clear-cut image emphasising
high contrast for sports viewing.
For a clear-cut image emphasising
high contrast for sports viewing
(the “Picture” and “Audio” settings
cannot be adjusted).
Off
Turn OFF the function for improving picture
quality through Clear Picture Processing.
Picture
OPC
Automatically adjusts the brightness of the screen.
Off
On
On:Display
Refer to page 75 for details.
“PC” is available only when selecting “HDMI 1”, “HDMI 2”,
“HDMI 3”, “HDMI 4” or “PC” from the “INPUT” menu.
“x.v.Colour” is available only when accepting an
“x.v.Colour” signal through an HDMI terminal.
NOTE
• If you select “AUTO”, some selections in the “AV mode”
menu may not be automatically set.
• “Game type” mode can be set. Refer to “Game type” on
page 38.
36
Item
The brightness is fixed at the value set in
“Backlight”.
Automatically adjusts.
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
NOTE
• When set to “On”, the TV senses the surrounding light
and automatically adjusts the backlight brightness.
Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
• This function does not work when “3D brightness
boost” is set to “High” or “Low”.
Basic adjustment
Picture
Picture
Picture adjustments
Advanced
Adjusts the picture to your preference with the
following picture settings.
Adjustment items
Selectable
items
Backlight
3D
brightness
boost
Contrast
Brightness
Colour
Tint
Sharpness
c (Cursor)
The screen dims
d (Cursor)
The screen
brightens
Refer to page 76 for details.
For less contrast
For less brightness
For less colour
intensity
Skin tones become
purplish
For less sharpness
For more contrast
For more brightness
For more colour
intensity
Skin tones become
greenish
For more sharpness
Colour temp.
This TV provides various advanced functions for
optimising the picture quality.
Go to “TV Menu” > “Setup” > “Picture” >
“Advanced”.
Adjusts the colour temperature to give the best
white image.
High
Mid-High
C.M.S.-hue
Middle
This function adjusts the hue of a selected colour
using a six-colour adjustment system.
Mid-Low
Low
C.M.S.-saturation
10 point setting*
This function increases or decreases the saturation
of a selected colour using a six-colour adjustment
system.
C.M.S.-value
This function adjusts the brightness of a selected
colour using a six-colour adjustment system.
Colour gamut range
Adjusts the range of a subset of colour to display
the image. Expanded colour gamut means more
colourfulness; images become more vivid.
Item
Standard
Expanded
Standard colour gamut.
More vivid colour with expanded
colour gamut.
NOTE
• This function is available only when selecting “MOVIE”
or “MOVIE (3D)” from the “AV mode” menu.
37
R/G/B Gain (LO),
R/G/B Gain (HI)
Item
White with bluish tone.
Intermediate tone between “High”
and “Middle”.
Natural tone.
Intermediate tone between “Middle”
and “Low”.
White with reddish tone.
Finely adjusts each colour
temperature between 1 to 10 points.
Adjusts the white balance by
changing the value of each item.
* “10 point setting” is available only when selecting
“STANDARD”, “MOVIE”, “STANDARD (3D)”, or “MOVIE
(3D)” from the “AV mode” menu.
Motion enhancement
“Active motion 800/200” technologies provide
superior solutions for digital display picture quality
removing motion blur. Select “Motion enhancement”
setting (“Active motion 800”, “Active motion 200”,
“High”, “Low”, “Off”).
NOTE
• This effect is greater on fast moving images.
• These functions will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set to “Off”
Basic adjustment
Game type
Adjusts the images of fast moving video games to
be clearer.
Standard
High motion
Item
Optimises picture quality for
standard video games.
Produces a sharp picture from the
original slow-moving picture in a
video game.
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending
on the vertical frequency), analyses it and then
recreates each still film frame for high-definition
picture quality.
Advanced
Sub pixel control 2
Enables smoother diagonal lines through detailed
dot control.
Advanced
Standard
Off
DNR
Film mode
Item
Produces smoother diagonal lines
by jaggy removal process.
Produces smooth diagonal lines.
No adjustment.
Gamma adjustment
Standard
Off
Item
Adjusts effect to reduce judder
from film contents. You can select
a desired level of judder reduction
from 0 to e10.
Plays back images with equal
display time for each frame,
reproducing movie theatre
experience.
Normal viewing mode.
Active contrast
Automatically adjusts the contrast of an image
according to the scene (“Advanced”, “Standard”,
“Off”).
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of e2 to a
minimum of f2.
38
“DNR” produces a clearer image (“Auto”, “High”,
“Middle”, “Low”, “Off”).
NOTE
• This function may not be available depending on the
input signal type.
Range of OPC
The brightness level range of the OPC sensor’s
automatic adjustments can be set according to
your preferences. The adjustment range of the OPC
sensor can be set to a maximum of e16 and a
minimum of f16.
NOTE
• This function is available only when the “OPC” setting is
set to “On” or “On:Display”.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• The maximum and minimum settings cannot be set to
the same number.
• Depending on the brightness of the surrounding light,
the OPC sensor might not operate if the adjustment
range is small.
Basic adjustment
Audio settings
Go to “TV Menu” > “Setup” > “Audio”.
Menu
Setup
CH list
:Enter
Audio
Audio
Audio adjustment
Bass enhancer
You can adjust the sound quality to your preference
with the following settings.
Item
Treble
Bass
:Back
Audio
STANDARD
Balance
Auto volume
[Off]
c (Cursor)
For weaker treble
For weaker bass
Decrease audio
from the right
speaker
d (Cursor)
For stronger treble
For stronger bass
Decrease audio
from the left
speaker
This function allows you to enjoy bass-enhanced
sound.
Audio
Clear voice
This function emphasises speech against
background noise for greater clarity.
Audio
Treble
Audio description setting
Audio
Bass
Surround
Balance
L30
R30
Audio
Auto volume
Different sound sources sometimes do not have
the same volume level, such as a programme and
its commercial breaks. This function reduces this
problem by equalizing levels.
High
Item
Strongly reduces the volume gaps among
different sound sources.
Middle
Low
Off
Slightly reduces the volume gaps among
different sound sources.
Does not adjust the volume gaps.
This function produces a surround effect from the
speakers.
Item
Reproduces a life-like experience for
events such as live sports or concert
3D Stadium
performances that take place in a stadium
like setting.
Reproduces a concert hall experience with
realistic live surround sound based on
3D Hall
reverberant sounds measured in a concert
hall.
Reproduces a movie theatre experience
with realistic live surround sound based on
3D Movie
reverberant sounds measured in a movie
theatre.
3D
Creates three-dimensional surround sound
Standard
with detailed control of the signal phase.
Normal
Provides limited surround sound.
Off
Outputs normal sound.
39
This function allows you to enable output of audio
description if the TV receives a signal including
audio description.
NOTE
• When the “Audio description” is set to “On”, the audio
description sound is superimposed on the main audio
when you select a broadcast compatible with audio
description.
• If you do not clearly hear the sound for the visually
impaired, go to “TV Menu” > “Setup” > “Audio” >
“Audio description setting” > “Mix level”, and select the
upper level to turn up the volume.
• This function is available only for DTV broadcasts. This
“Audio description setting” menu is not displayed for
the ATV or the external inputs.
• The audio description sound is superimposed on
the main audio only when the sound is output on the
speaker sound output, headphone sound output and
sound for audio out output. The sound is not output on
the S/PDIF sound output and the SCART sound output.
• This function is not available for the AQUOS Audio
speaker system.
• This function does not work during USB-recording
playback.
Basic adjustment
Power save settings
Go to “TV Menu” > “Setup” > “ECO”.
Menu
Setup
CH list
:Enter
:Back
ECO
ECO
ECO
Energy save
No operation off
This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
Standard
Advanced
ECO picture control
[On]
Energy save
[Off]
Off
No signal off
Item
Reduces the backlight brightness.
Reduces the backlight brightness more
than “Standard”.
The backlight brightness is the same
value of your settings in the selected
“AV mode”.
[Disable]
No operation off
[Disable]
ECO
ECO picture control
This function automatically detects the image
source and decreases the power consumption while
keeping the brightness of the image unchanged.
NOTE
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”.
• This function does not work when “3D brightness
boost” is set to “High” or “Low”.
E
“Energy save” status icons
Icon
“Energy save” is set to “Standard”.
NOTE
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”, “DYNAMIC” or “AUTO”.
• This function does not work when “Energy save” is set
to “Standard” or “Advanced”.
• This function is greyed out in 3D mode.
Description
“Energy save” is set to “Advanced”.
When “Energy save” is set to “Standard” or
“Advanced”, “Energy save” status icons appear
in the “Picture” menu and channel information
windows.
ECO
No signal off
When set to “Enable”, the TV will automatically
enter standby mode if there is no signal input for 15
minutes.
NOTE
• Even if a TV programme finishes, this function may not
operate because of interference from other TV stations
or other signals.
40
The TV will automatically enter standby mode if no
operations are performed in three hours if “Enable”
is selected.
NOTE
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
ECO
Sleep timer
Allows you to set a time when the TV automatically
enters standby mode. You can set the time span for
entering standby mode after selecting “Change”.
NOTE
• Select “Off” to cancel the sleep timer.
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
Basic adjustment
4 Press a/b to select the broadcast standard
View settings
you want to search, and then press ;.
Go to “TV Menu” > “Setup” > “View setting”.
E
:Enter
Setup
:Back
E
Auto installation
Network setup
Select recording device
Analogue search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting on page 16.
View setting
Channel settings
Terrestrial
After selecting the service you want to search,
either “Terrestrial” or “Cable”, refer to Digital
broadcast setting on page 16.
Menu
CH list
Digital search
E
Satellite search
After selecting “Satellite search”, the current
DVB-S/S2 setting screen is displayed. Refer to
the “Satellite search” setting on page 17.
Important information:
View setting
Auto installation
The TV automatically detects and stores all available
services in your area. This function also allows you
to perform the channel setting for digital, satellite
and analogue individually and reconfigure the
settings after the initial auto installation has been
completed.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Auto installation”.
2 Press c/d to select “Yes”, and then press ;.
3 Press a/b/c/d to select the desired
language, and then press ;.
NOTE
• PIN input is required when executing “Auto installation”.
The default PIN is “1234”. To change the PIN setting,
refer to Individual setting — PIN (Page 44). To reset the
PIN setting (PIN input will no longer be needed), refer to
Reset the PIN (Page 79).
• You cannot set the Home/Store setting and the country
setting in “Auto installation” in the “Setup” menu. If
you want to reconfigure those settings, automatically
execute initial auto installation after executing “Reset”
from the “Setup” menu.
• The current country setting is displayed on the screen.
Digital setting
Satellite services are only available for the 857 model
series.
NOTE
You can reconfigure the following settings when you
select “Terrestrial” in the initial auto installation or
the “Auto installation” menu.
E Additional search
Use this menu to add new services automatically
after “Digital search” in the “Auto installation” menu
has been completed.
E Manual search
Add new services within a specified frequency band.
• Enter the frequency using 0_9 numeric buttons.
• You can perform “Manual search” with a service number
only when the five Nordic countries have been selected
in the country setting.
E Manual adjust
Configure various settings for each service using the
colour (R/G/Y/B) buttons.
• After selecting “Next” in the DVB-S/S2 setting screen,
you need to select your preferred satellite broadcast to
start searching.
Service
no.
Service
name
Lock
CH skip
Old LCN
View setting
Programme setup
You can reconfigure the DTV service settings
automatically or manually.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Programme setup”.
2 Press a/b to select the broadcast standard
you want to reconfigure, and then press ;.
NOTE
• PIN input is required when executing “Programme
setup”. The default PIN is “1234”. To change the PIN
setting, refer to Individual setting — PIN (Page 44).
To reset the PIN setting (PIN input will no longer be
needed), refer to Reset the PIN (Page 79).
41
Lock
CH skip
Delete
Sort
1 Press a/b to select the desired service.
2 Press the colour button on the remote control
unit corresponding with the item you want to
reconfigure.
• The ✔ mark indicates the operation is set to on.
Each time the colour button is pressed, you can
switch the corresponding operation on/off.
NOTE
• Depending on the installation country and/or
broadcaster or operator profile may only R option is
available.
Basic adjustment
Buttons for “Manual adjust” operation
Press R button.
Lock
When the service is locked, you must enter your
PIN whenever you tune to the service.
CH skip
Press G button.
Services with a ✔ mark are passed over when
pressing :r/s on the TV or remote control
unit.
Delete
Press Y button.
The selected service is deleted. If you want
to watch the service you deleted once again,
perform “Auto installation”, “Additional search”,
or “Manual search”.
Sort
Press B button.
The item position of services can be sorted.
1 Press a/b to select the service whose
item position you want to move, and then
press ;.
Satellite setting (857 series only)
Cable
You can reconfigure the following settings when you
select “Cable” in the initial auto installation or the
“Auto installation” menu.
E Additional search
Use this menu to add new services automatically
after “Digital search” in the “Auto installation”
menu has been completed. Follow steps 1 to 5 in
Searching for cable broadcasts on page 16.
E Manual search
Add new services within a specified frequency band.
After setting the items on the following screen, the
TV starts searching.
• Refer to the table about menu items in the centre
column on page 16.
Frequency
Symbol rate
MHz
QAM modulation
Search start
2 Press a/b to move it to the desired
position, and then press ;.
3 Repeat steps 1 and 2 until all desired
service items are sorted.
E Favourite network selection
When the country setting is “Norway” and DTV,
the user may select their preferred network. The
service sorting will be changed in accordance with
the preferred network. If a conflict occurs between
multiple networks, this function allows you to select
your preferred network.
1 Press a/b to select the desired network.
2 Press ; to set the network selected.
Before selecting the type of search in “Satellite
setting”, you need to select the satellite broadcast.
SAT2 [Hot Bird 13E]
SAT3 [None]
SAT4 [Turksat]
E Additional search
Use this menu to add new services automatically
after auto installation has been completed. Follow
steps 1 to 2 in the right column on page 17.
E Manual search
Add new services within a specified frequency band.
After setting the items on the following screen,
select “Yes” from “Search start” menu.
Band
E Manual adjust
This function is the same as in “Terrestrial”. Refer to
“Manual adjust” in “Terrestrial”.
NOTE
• Some functions may not display or be selectable
depending on the country setting or cable provider
selection.
Frequency
Symbol rate
Search start
[Vert/Low]
Vert/Low
Vert/High
Horiz/Low
Horiz/High
E Manual adjust
This function is the same as in “Digital setting”.
Refer to “Manual adjust” in “Digital setting”.
42
Basic adjustment
Analogue setting
You can reconfigure the analogue TV channels
settings automatically or manually.
E Additional search
Use this menu to add new services automatically
after “Analogue search” in the “Auto installation”
menu has been completed.
• Start searching channels after selecting the colour
system and sound system.
E Manual adjust
Use this menu to set up analogue TV channels
manually.
After selecting “Yes” on the screen, press
a/b/c/d to select the channel you want to
set and then press ;.
Fine
You can adjust the frequency to the desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• You can set by directly entering the frequency number
of the channel with 0_9 numeric buttons.
EXAMPLE
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
• 49.25 MHz: Press 4 > 9 > 2 > 5 > ;.
Colour sys.
Select the optimum colour system to receive
(“Auto”, “PAL”, “SECAM”).
Sound sys.
Select the optimum sound systems (broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
Label
When a TV channel sends its network name, the
“Auto installation” detects the information and
assigns a name to it. However, you can change
channel names individually.
Select each character of the new name for the
channel with using the software keyboard (Page 14).
NOTE
• The name can be five characters or less.
E Sort
Channel positions can be sorted freely.
1 Press c/d to select “Yes”, and then press ;.
2 Press a/b/c/d to select the channel you
want to move, and then press ;.
3 Press a/b/c/d to move it to the desired
position, and then press ;.
4 Repeat steps 2 and 3 until all desired channels
are sorted.
E Erase programme
Channels can be erased individually.
1 Press c/d to select “Yes”, and then press ;.
2 Press a/b/c/d to select the channel you
want to erase, and then press ;.
• A message window pops up.
Skip
3 Press c/d to select “Yes”, and then press
Channels with “Skip” set to “On” are passed over
when using :r/s even if selected while watching
the image from the TV.
Lock
You can block the viewing of any channel.
NOTE
• See “PIN” for setting a PIN.
• When “Lock” is set to “On” for a channel, “Child lock
has been activated” displays, and the image and sound
of the channel are blocked.
• When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting
the correct PIN unlocks the “PIN” temporarily until the
power is turned off.
43
4
; to erase the selected channel. All the
subsequent channels move up.
Repeat steps 2 and 3 until all desired channels
are erased.
Basic adjustment
Individual setting — PIN
View setting
PIN
Allows you to use a PIN to protect certain settings
from being accidentally changed.
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “PIN”.
NOTE
• PIN input is required when executing “PIN”. The default
PIN is “1234”. To reset the PIN setting (PIN input will no
longer be needed), refer to Reset the PIN (Page 79).
E When selecting “Yes”
Register a four-digit number to use the “PIN”
function.
1 Press c/d to select “Yes”, and then press ;.
2 Enter the four-digit number as a PIN using 0_9
numeric buttons.
3 Enter the same four-digit number as in step 2 to
confirm.
View setting
Parental rating
This function allows DTV services to be restricted.
It prevents children from watching violent or sexual
scenes that may be harmful.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Parental rating”.
2 Repeat steps 1 to 4 in when selecting “Yes” to
the left.
Individual setting — Clock
View setting
Clock setup
You can adjust the time manually and change the
clock display.
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Clock setup”.
Time adjustment
NOTE
• “Universal viewing” and “Parental approval pref.” are
ratings used exclusively in France.
• Refer to page 88 for details about ratings.
This function allows you to set the clock manually.
NOTE
• If you select “No”, the TV will try to get the time for the
broadcast.
Time display
This function allows you to display the clock time in
the lower-right corner of the screen.
On
• “The system PIN has been changed successfully”
displays.
On (half-hourly)
4 Press ;.
Off
NOTE
• As a precautionary measure, make a note of your
PIN and keep it in a safe place that children cannot
reach.
• “0000” cannot be set as the PIN code.
• To view a locked channel, you must enter the PIN (see
pages 42 and 43 for locking channels from viewing in DTV,
SAT and ATV mode). When you select a locked channel,
a PIN prompt message pops up. Press 6 to display the
PIN input window.
Item
Displays the clock time.
Displays the clock time in
30-minute increments.
Hides the clock time.
Time format
You can select the time format (either “24HR” or
“AM/PM”) for the clock time.
Clock type
You can select the type of the clock (either “Digital”
or “Analogue”) displayed in the lower right of the
screen.
NOTE
• This setting does not influence the clock displayed on
the HOME screen.
44
Basic adjustment
Individual setting — Language
View setting
Digital audio language
Set up to three preferred multi audio languages to
display if the audio languages are available.
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Digital audio language”.
E Switching the multi audio languages
Each time you press 7 on the remote control unit,
the audio language switches.
View setting
Subtitle
E Set “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over
each of the subtitle language settings (e.g., “1st
language”, “2nd language”, etc.).
EXAMPLE
1st language
(For hearing impaired)
1st language
NOTE
• Subtitles will not be displayed when the programme
does not contain subtitle information.
• Subtitles for teletext will not be displayed when an MHP
service is active (858 series only).
• Subtitles may not be displayed properly in 3D mode.
View setting
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if
subtitles are available.
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Subtitle”.
Selectable items
E 1st language
E 2nd language
E For hearing impaired
Language
You can select an OSD language from among 26
languages. Refer to the OSD language column in
the specification table for the selectable languages
(Page 84).
Go to “TV Menu” > “Setup” > “View setting” >
“Language”.
E Switching subtitle languages
Each time you press [ on the remote control unit,
the subtitle switches.
Off
1st language
2nd language
45
Useful viewing functions
Optional features settings
Go to “TV Menu” > “Setup” > “Option”.
Menu
CH list
:Enter
Setup
:Back
Option
Option for view
3D setup
Terminal setting
Colour system
Selecting the picture size manually
Option
Wide mode
You can select the picture size. Selectable picture
size varies with the type of signal received.
1 Go to “TV Menu” > “Setup” > “Option” >
“Option for view” > “Wide mode”.
• You can also select an item by pressing f on the
remote control unit.
• The menu lists the “Wide mode” options selectable
for the type of video signal currently received.
2 Press a/b to select the desired item.
• As you toggle the options, each is immediately
reflected on the screen. There is no need to press
;.
Item (for SD [Standard-Definition] signals)
Keeps the original aspect ratio in a full
Normal
screen display.
For 14:9 letterbox pictures. A thin
side bar appears on each side, and
Zoom 14:9*
you may also see bars on the top and
bottom with some programmes.
In this mode, the picture is stretched
toward each side of the screen. The
Panorama
picture may appear similar to “Full”
depending on broadcast signals.
Full
For 16:9 squeeze pictures.
For 16:9 letterbox pictures. Bars may
Cinema 16:9
appear on the top and bottom with
some programmes.
For 14:9 letterbox pictures. Bars may
Cinema 14:9*
appear on the top and bottom with
some programmes.
Keeps the original resolution, do not
Original
expand.
Selecting the picture size automatically
Option
Auto wide (only DTV/SAT mode)
The “Auto wide” allows the TV to switch
automatically among the different picture size.
Go to “TV Menu” > “Setup” > “Option” > “Auto
wide”.
NOTE
• Use “Wide mode” if an image does not switch to the
appropriate picture size. When the broadcast signal
contains no aspect ratio information, the function will
not work even if enabled.
• This function is available for 3D images converted from
2D images or normal 2D images.
Selecting the picture size automatically
for 4:3
* The items will be diplayed in ATV/DTV/SAT mode.
Item (for HD [High-Definition] signals)
Displays with an overscan image.
Full
Crops all sides of screen.
Displays with an underscan image
only when receiving a 720p signal.
Displays with the High-Definition image
Underscan
adjusted optimally. Noise may appear
on the edge of the screen with some
programmes.
Displays an image with the same
Dot by Dot
number of pixels on the screen when
receiving 1080i/1080p signals only.
NOTE
• Some items do not appear depending on the type of
received signal.
• You may not be able to change the wide mode while in
3D mode.
• Refer to page 59 for PC signal inputs.
46
Option
4:3 mode (only DTV/SAT mode)
The 4:3 mode allows you to select between
“Normal” and “Full”.
Go to “TV Menu” > “Setup” > “Option” > “4:3
mode”.
Normal
Full
Item
Normal range keeping 4:3 or 16:9
aspect ratio.
Wide image without side bars.
4:3 screen types
4:3 mode
4:3 mode
“Normal”
“Full”
Useful viewing functions
Terminal setting
Option
Option
Digital audio output
Input skip
This function allows you to select the digital audio
signal type.
Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Digital audio output”.
PCM
Bitstream
Item
To stereo audio system
To multi-channel Dolby Digital, DTS
audio system
Option
Audio select
When using the PC terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (L/R)
jack for analogue audio input.
Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Audio select”.
When selecting “HDMI 2” from the “INPUT” menu
HDMI
HDMI +
Analogue
Item
When connecting devices (including a PC)
with a HDMI cable to the HDMI 2 terminal.
When connecting devices (including a
PC) with a DVI/HDMI cable to the HDMI
2 terminal and inputting analogue audio
signals from the AUDIO (L/R) jack.
When selecting “PC” from the “INPUT” menu
Video
Video+Audio
Item
When connecting devices with an
AV cable to the PC terminal, displays
images without audio.
When connecting a PC to the PC
terminal, and inputting analogue audio
signals from the AUDIO (L/R) jack.
Option
Skipping specified inputs
This setting allows you to skip the inputs on the
input source selection operation.
Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Input skip”.
NOTE
• When you select “ATV”, “DTV” or “SAT”, the skip
function works only when using the b button on the
TV.
• If you connect external equipment to an HDMI terminal
which you have set to be skipped, a notification
message appears on the display when a signal is
received from the connected external equipment. Press
“OK” to reset the related skipping setting so that the
input terminal becomes available.
Input label
You can label each input source with a custom
description.
1 Press b to select the desired input source
from the “INPUT” menu, and then press ;.
2 Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Input label”.
3 Select each character of the new name for the
input source with using the software keyboard
(Page 14).
NOTE
• The label can be six characters or less.
• This menu can be changed in the case of the following
input sources:
− EXT1–3
− HDMI1–4
− PC
Input source settings
CH list
Option
INPUT
Input select
TV
For setting the signal type of external equipment.
1 Press b to select the input source for setting
the input signal (“EXT1”) from the “INPUT”
menu, and then press ;.
2 Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Input select”.
EXT1
Item
Y/C, CVBS, RGB
NOTE
• If no (colour) image displays, try changing to another
signal type.
• Check the operation manual of the external equipment
for the signal type.
47
Switchable
Selecting the HDMI picture size
automatically
Option
HDMI auto view
This function allows you to automatically change to
the appropriate picture size when viewing an HDMI
signal using the HDMI 1, 2, 3 and 4 terminals.
1 Press b to select the input source (“HDMI 1”,
“HDMI 2”, “HDMI 3” or “HDMI 4”) connected to
your HDMI device, and then press ;.
2 Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “HDMI auto view”.
Useful viewing functions
NOTE
Option
Headphone/Audio out select
You can select which device is used for outputting
audio.
Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Headphone/Audio out
select”.
Headphone
Audio out
Item
Output audio through headphones.
Output audio through an A/V receiver
or surround audio controller.
• This function does not work when “Change audio
output device” (Page 34) is set to “By AQUOS audio SP”
or “Headphone/Audio out select” is set to “Audio out”.
• Regarding the volume adjustment when “Dual” is set:
− Adjust the speaker volume with the i+/- buttons
on the remote control unit.
− Adjust the headphone volume with the i+/buttons on the TV.
− The headphone volume is not muted even by pressing
e (Mute) button on the remote control unit.
• When not using the headphones:
− Audio outputs from the speakers regardless of the
settings.
Option
CAUTION
• This terminal is also used for headphones. Reduce the
volume before using headphones. Overwhelming sound
may damage your hearing.
NOTE
• If you select “Audio out” when a cable is inserted in the
HDMI 2/PC AUDIO (L/R) terminal, the TV speakers are
muted.
• When you select “Audio out”, you can adjust the TV
sound volume with the i+/- buttons.
Option
Headphone out setting
You can select the headphone/speaker audio output
when using the headphones.
Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Headphone out setting”.
Headphone
Dual
Item
Audio output from headphones only.
Audio output from headphones and
speakers.
Option
Programme title display
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
Go to “TV Menu” > “Setup” > “Option” >
“Screen effect” > “Programme title display”.
NOTE
• This function is available only when the DTV/SAT mode
is selected.
Adjusting image position
Colour system
You can change the colour system to one that is
compatible with the image on the screen.
Go to “TV Menu” > “Setup” > “Option” >
“Colour system”.
NOTE
• The factory preset value is “Auto”.
• If “Auto” is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g., “PAL”, “SECAM”).
Option
Position
For adjusting a picture’s horizontal and vertical
position.
Go to “TV Menu” > “Setup” > “Option” >
“Screen effect” > “Position”.
H-Pos.
V-Pos.
Screen effect settings
Item
Centres the image by moving it to the
left or right.
Centres the image by moving it up or
down.
Option
NOTE
Channel selecting effect
• Adjustments are stored separately for each input
source.
• Depending on the input signal type, “Wide mode”
setting or “Video mode” for the USB media mode, a
position setting may not be available.
• This function is not available for DTV broadcasts with
MHEG signals.
• This function is not available for DTV broadcasts with
MHP signals (858 series only).
• This function is available for 3D images converted from
2D images or normal 2D images.
This function shows a screen effect when choosing
or changing channels.
Go to “TV Menu” > “Setup” > “Option” >
“Screen effect” > “Channel selecting effect”.
48
Useful viewing functions
Additional features
Option
Illumination
This function makes the LED on the front of TV
illuminated in several ways.
Go to “TV Menu” > “Setup” > “Option” >
“Illumination”.
Off
Standby
Watch
Always
Item
The LED is not illuminated.
The LED is illuminated while the TV is
in standby mode.
The LED is illuminated while you watch
TV.
The LED is illuminated all the time.
Wallpaper setting
This function is available only when “Quick start” is
set to “On (Wallpaper)”.
Activating the function will display still images when
the TV is in standby mode.
Data source
Pre-installed
Option
Quick start
You can reduce the TV’s start-up time after turning
on the power with the remote control unit.
Go to “TV Menu” > “Setup” > “Option” > “Quick
start”.
Item
The TV quickly starts up from standby.
Around 15 W or more of power
On
consumption is required during
standby.
The TV enters wallpaper mode when in
On (Wallpaper)
standby condition.
Power consumption is small during
Off
standby.
USB
When you display images by using the
USB device:
• Create a folder named “WP” in the root directory of the
USB device (the first directory when the USB device is
opened), and store into the folder the still images you
want to display for the wallpaper.
• You must insert the USB device into the USB terminal
before turning off the TV.
Timer setting
For the wallpaper, you can select either the still
images pre-installed in the TV or your favourite still
images stored in the USB device.
NOTE
• The factory default for this item is “Watch”. Set to “Off”
if you do not want the LED to illuminate.
• The LED is illuminated in white for 2D mode.
• The LED is illuminated in blue for 3D mode.
E
Option
Item
The images pre-installed in the TV will
be displayed in a slideshow.
Images stored for the wallpaper will
appear.
If only a single still image is stored in
the USB device, that image will be
displayed as the wallpaper. When there
are multiple still images in the memory,
all the images will be displayed in a
slideshow.
You can set the length of time the TV will remain in
the Wallpaper mode (3 hours/6 hours/12 hours/24
hours).
NOTE
• Setting “Quick start” to “On” consumes more power.
• No buttons except for a work even while the still
images are being displayed.
• If the ready-for-use USB device is not inserted, the still
images pre-installed in the TV will be displayed in a
slideshow even when “Data source” is set to “USB”.
• The still images will be displayed until the set time has
elapsed.
• If you do not want to use the wallpaper as described
above, set “Quick start” to “On” or “Off”.
Option
NOTE
• Images are displayed as a slideshow in 3-minute
intervals.
• As a USB device cannot be detected immediately after
the TV is turned on from standby mode, the wallpaper
pre-installed in the TV may be displayed even when
“Data source” is set to “USB”. To display the USB
Wallpaper, turn on the power and wait 10 seconds
before turning off the power.
• When in the wallpaper function, do not perform any
OAD operations or EPG searches.
• A timer set for recording or watching a programme will
take priority 2 minutes before the programme starts.
49
Boot picture
With this function activated, the SHARP logo will be
displayed when you turn on the TV.
NOTE
• This function is not available when the “Quick Start” is
set to “On”.
Useful viewing functions
Option
Option
Game play time
Key lock
This function allows you to display the elapsed time
on the screen when “AV mode” is set to “GAME”.
Go to “TV Menu” > “Setup” > “Option” > “Game
play time”.
On
Off
Item
Under connecting a game console to
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.
Hides the time.
NOTE
• This menu can be selected in the case of the following
input sources:
− EXT1–3
− HDMI1–4
− PC
This function allows you to lock the buttons on the
TV or remote control unit in order to prohibit children
from changing the channel or volume.
Go to “TV Menu” > “Setup” > “Option” > “Key
lock”.
Off
RC control lock
Button control
lock
Item
Unlocks the buttons.
Locks all buttons on the remote
control unit.
Locks the buttons on the TV except
the power switch.
NOTE
• You cannot set both “RC control lock” and “Button
control lock” at the same time.
E Cancelling the lock
Press @ on the TV and set to “Off” to cancel
the “RC control lock”. Press @ on the remote
control unit and set to “Off” to cancel the “Button
control lock”.
• Refer to page 20 for menu operation using @ on the
TV.
50
Other useful features
USB-recording
You can enjoy DTV/SAT recording or playback by
connecting a commercially available USB HDD to
the TV.
• USB-recording does not work for ATV, external
inputs, data broadcasts, radio broadcasts or network
applications.
Connecting a USB HDD
Connect a commercially available USB HDD to the
USB port of the TV.
• USB storage device: USB HDD
• Be sure to read the operation manual for the USB HDD.
• At least USB HDDs with memory between 100GB
and 2TB and under are required for USB-recording to
register.
• The USB 2 (HDD) port is compatible with portable USB
HDD which can operate with the power supply from the
USB port (bus powered drive).
• Refer to Disconnect the USB HDD when removing the
USB HDD (do not remove the USB HDD during USBrecording operation).
USB HDD registration
It is necessary to first perform USB HDD registration
for USB HDDs used for USB-recording.
Directly connect only one USB HDD to the USB
port while registering the USB HDD (when two
or more USB HDDs are connected, USB HDD
registration is not available).
• The screen prompt pops up.
When the USB HDD is connected to the TV
Register the USB HDD. Follow the on-screen
instructions to register the USB HDD.
NOTE
• Only one USB HDD for USB-recording can be registered
on the TV. Two or more USB HDDs for USB-recording
cannot be used at the same time.
• When a USB HDD is registered, formatting may be
performed. In that case, all data will be deleted.
Disconnecting the USB HDD
When you disconnect the USB HDD, be sure to the
following steps.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device removal”.
NOTE
NOTE
• USB-recording may take a few moments to start after
the TV is turned on.
• This function may not work properly for some USB
HDDs.
• Do not connect and disconnect a USB HDD from the TV
repeatedly.
• This menu item cannot be selected when a USB HDD
for USB-recording is not registered.
• The USB HDD registration for USB-recording is
cancelled in the following cases:
− When the USB HDD is removed.
− When another USB HDD is registered for USBrecording; only one USB HDD can be registered for
USB-recording.
51
Other useful features
Buttons
How to operate USB-recording
You can enjoy DTV/SAT recording or playback by
connecting a commercially available USB HDD to
the TV.
CAUTION
• Do not unplug the AC cord or turn off the MAIN POWER
switch during USB-recording timer setting or USBrecording.
• When the AC cord is unplugged and the MAIN POWER
switch is turned off:
− The USB-recording timer setting is cancelled.
• USB-recording may be automatically stopped when
signal reception is poor.
• Only this TV can playback the programme recorded on
the USB HDD connected to this TV. The programmes
cannot playback on other TV or PC.
• When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN code
in advance (Page 12).
SHARP corporation bears no responsibility regarding
compensation for content when recording cannot does
not take place, loss of recorded data or other direct or
indirect damages related to these matters. Please be
forewarned.
E
REC E
REC STOP H
I
H
F
S
J
K
Buttons for USB-recording operation
Remote control unit
Control panel
L
a
b
Description
Displays the list of the programmes
recorded by USB-recording.
Start recording the programme you are
watching.
• You cannot playback the recorded
programme until several seconds
after pressing REC E to start
recording.
Stop recording.
Playback the recorded programme.
Stop the programme in playback and
go back to the real time broadcast
(live).
Pause the programme in playback
(USB-recording continues).
• This function is released in 15
minutes.
Reverse (each time you press this
button, the reverse speed changes in
three levels).
Fast forward (each time you press this
button, the fast forward speed changes
in three levels).
Jump backward to the previous
chapter point*.
Jump forward to the next chapter
point*.
Playback will resume after jumping
backward by the time interval you set
in “Jump time setting” (Page 54).
Playback will resume after jumping
forward by the time interval you set in
“Jump time setting” (Page 54).
* Chapter points are fixed at 10 minute increments.
52
NOTE
• Refer to Regarding “Select recording device” (Page 31),
when the buttons for USB-recording do not work.
• Instead of pressing buttons on the remote control
unit, most of the operations shown to the left are also
available on the screen with the control panel. You can
call up this control panel by pressing CONTROL on the
remote control unit or select “Control (USB REC)” from
“TV Menu” > “Setup” > “Option” > “Option for view”.
• The “Audio description setting” menu does not work
during USB-recording playback.
• USB-recording stops if no operation detected for three
hours.
• When recording operations are not stopped manually,
recording will automatically stop after six hours.
• To release USB-recording, press REC STOP H, change
the DTV/SAT channel or change “INPUT”.
• Some functions do not work during USB-recording.
• USB-recording does not start automatically, but starts
only when REC E is pressed or when a USB-recording
timer setting is started.
• The PIN is required when you use the buttons such as
S, J, K, L, a, b if you set the PIN and
any options for “Parental rating” except “None” are
selected.
• Do not disconnect the USB-HDD used for USBrecording during USB-recording operation.
• MHP services do not work during USB-recording
playback (858 series only).
Other useful features
USB-recording
You can record the programme you are watching to
the registered USB HDD.
Starting USB-recording
Press REC E.
• The TV starts USB-recording.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
• You cannot switch the channel or the input source
during USB-recording.
• During USB-recording, the TV cannot display photos
or play music from the internet, Home network, or USB
storages.
• You may not record programmes.
Completing USB-recording
1 Press REC STOP H.
• The screen prompt pops up.
2 Press c/d to select “Yes”, and then press ;.
• USB-recording has completed.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
USB-recording timer setting
You can set the USB-recording timer setting for
programmes you want to record.
NOTE
• To prevent the first part of the programme from being
cut, start recording the programme a few seconds
earlier than time set to start recording.
• When recording/viewing timer settings are set
continuously for multiple programmes, schedule the
recording of the previous programme to end earlier than
the end of the programme itself. Recording/viewing
timer setting of the next programme will start after that.
• A message will be displayed when the scheduled time
overlaps with an existing schedule. Make changes in
accordance with the on-screen instructions.
• It is not possible to newly schedule a recording that
overlaps with a timer setting that is currently running
(recording). When urgent setting of a schedule is
desired, stop recording before scheduling.
• A combined total of 16 timer settings (“Watch” and
“Record”) can be set.
• A CAM (CI Plus v1.3) PIN code may be necessary
to record broadcasts scrambled due to parental
rate settings. When a CAM PIN code is required for
recording a programme, it is necessary to enter the
CAM PIN code in advance (Page 12).
If a CAM PIN code is not entered or is entered
incorrectly, the programme will not be able to be
recorded/played back.
EPG timer setup
You can select the programme you want to record
and set the timer setting with EPG (Pages 23 and 24).
Manual timer setting
“Manual timer setting” enables you to set date,
recording start/stop time and channel.
1 Press EPG.
2 Press B to display the timer list.
3 Press B again to display the “Manual timer
setting” screen.
4 Set date, recording start/stop time and channel.
5 Press c/d to select “Record”, and then press
;.
• A confirmation screen will be displayed for the timer
setting.
6 Press c/d to select “Yes”, and then press ;.
53
Manual clock setting
When the TV cannot receive the time via digital
broadcast, perform “Manual timer setting” after
setting the clock.
Go to “TV Menu” > “View setting” >
“Individual setting” > “Clock setup” > “Time
adjustment”.
NOTE
• You cannot set the manual clock setting during USBrecording.
Timer list
A list of programmes scheduled for recording can be
displayed.
1 Press EPG.
2 Press B to display the timer list.
USB-recording playback
To playback the recorded programmes, open
the USB-recording list and select the desired
programme.
1 Go to “HOME” > “Record list”.
2 Press “OK” button.
• Press H to return the scene that is broadcasting.
NOTE
• You may not playback recorded programmes when the
programme provider restricts or completely prevents
recording or later watching of an encoded programme.
• Depending on the protection signal specified by a
broadcast station, recorded broadcasts can only be
played back for a certain period of time or cannot be
played back at all (Page 12).
Other useful features
Time shift playback
Playback recorded scenes of the programme being
recorded.
Press d during recording.
Counter
The counter displays on the screen with the control
panel.
00:02:38/00:08:18
• Press H to return the scene that is broadcasting.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
• Time shift playback may take a few moments to start.
• Time shift playback will stop and the TV will return to
normal broadcasting when a program is fast-forwarded
to a scene that is near to the scene currently being
broadcast. The timing at which it returns depends on
the speed of fast-forwarding.
• Depending on the protection signal specified by a
broadcast station, recorded broadcasts can only be
played back for a certain period of time or cannot be
played back at all (Page 12).
Display information regarding USBrecording
n
Current playback time
o
p
Total playback time of the content
The grey bar shows how much time has
progressed.
• Hidden during recording
• Hidden during recording or playback-duringrecording
Audio (ENG)
STEREO
Video
Subtitle
Off
>> New information
n
o
The recording icon shows up when REC E is
pressed and the TV is recording the programme.
The status icon shows up depending on what
is shown on the screen.
Jump time setting
You can set the time interval for playback to resume
after jumping backwards/forward.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Jump time setting”.
• A time interval from 10 sec. to 99 min. 50 sec can
be selected.
NOTE
• You can use the time interval you set using the a or
b buttons.
View setting
Device registration
NOTE
• You can also call up the information above by pressing
CONTROL on the remote control unit or select “Control
(USB REC)” from “TV Menu” > “Setup” > “Option” >
“Option for view”.
View setting
Auto input selection
Channel display
Channel information displays by pressing p on the
remote control unit.
View setting
You can choose whether or not to switch the input
source automatically when receiving an AQUOS
LINK or an Euro SCART compatible signal on the TV
during USB-recording operations.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Auto input selection”.
Enable
Disable
Item
Release USB-recording when receiving
an AQUOS LINK or a Euro SCART
compatible signal. Switch input source
automatically.
USB-recording continues to work.
The TV does not switch input source
automatically even when receiving
an AQUOS LINK or a Euro SCART
compatible signal.
54
You need to perform this function to register the
USB HDD for the USB-recording.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device registration”.
• Refer to USB HDD registration (Page 51).
NOTE
• Only one USB HDD can be registered for USBrecording. Remove all USB HDDs except the one used
for USB-recording.
• At least USB HDDs with memory between 100GB
and 2TB and under are required for USB-recording to
register.
• Some USB HDDs, such as ones which have multiple
drives, etc., cannot be used for USB-recording.
View setting
Device format
You can format all data on the USB HDD.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device format”.
NOTE
• Once formatting has been completed, data cannot be
restored.
Other useful features
USB media/Home network
USB media/Home network
In both modes, you can enjoy viewing photos,
listening to music and watching videos from external
USB devices (USB Memory, USB card reader (Mass
Storage Class), USB HDD) or Home network server.
NOTE
• To connect a Home network server, refer to Network
setup (Page 64).
• This function may not work properly for some USB
storage devices.
• The corresponding file format is different between “USB
media” and “Home network”.
• “Wide mode” is fixed during “Photo mode”. During
“Video mode”, you can select “Auto” or “Original”.
• Depending on the Home network server, the TV may not
be able to recognise the contained data.
• Use only alphanumeric characters for naming files.
• Do not disconnect a Home network server from the TV
while transferring files, using the slide show function,
when a screen is switching to another or before you exit
“Home network” from the “HOME” or “INPUT” menu.
• Do not connect and disconnect a Home network server
from the TV repeatedly.
• Depending on the USB device, the TV may not be able
to recognise the contained data.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending on
the character set) may not be displayed.
• Do not disconnect a USB device or memory card from
the TV while transferring files, using the slide show
function, when a screen is switching to another or
before you exit “USB media” from the “INPUT” menu.
Selecting the mode
Common operation
Select “USB media” or “Home network” from the
“HOME” or “INPUT” menu to enter this mode.
Selecting modes and drives/servers
1 Press B.
Photo mode
Viewing thumbnails
When the USB media menu is displayed
1 Press a/b to select “Select USB drive”, and then
press ;.
• The available selections are “Select USB drive”
and “Folder display setting”.
2 Press a/b/c/d to select the USB device where
you want to find your files, and then press ;.
• You can select from “All” or “Folder” for the type
of folder directory in “Folder display setting”.
When the Home network menu is displayed
Press a/b to select the Home network server where
you want to find your files, and then press ;.
• Press Y to search for servers.
* This screen image is for the USB media mode. It
may be slightly different in the Home network mode.
Buttons for thumbnail operations
(When using USB media mode)
2 Press c/d to select among “Photo mode”,
“Music mode” or “Video mode”, and then press
;.
Music mode
Video mode
Buttons
;
a/b/c/d
(Cursor)
Select a desired item.
6
All*: Return to the previous screen.
Folder*: Return to the upper folder. When the top
folder is displayed, return to the top menu screen.
Photo mode
R button
NOTE
• The explanations for the buttons that can be used in
each mode are the explanations when using USB media
mode. Some operations may differ in Home network
mode. Follow the guide display during operations.
• You do not need to select the drive/server in step 1
when there is only one drive in the connected USB
device or there is only one Home network server
connected to the TV.
• 16 is the maximum number of drives that can be
displayed in USB media mode.
• 10 is the maximum number of servers that can be
displayed in Home network mode.
• You cannot enter these modes when there is no server
connected to the TV in Home network mode.
55
Description
When selecting a folder icon: Enter this directory.
When selecting a photo thumbnail: Enlarge the photo.
G button
Y button
B button
Select/deselect items (✔ mark appears on the
selected items).
All*: Select BGM for the slide show.
Folder*: Move to the top menu screen.
Start the slide show.
Display “USB media menu”.
• 3D display
• Select slide show interval
• Select slide show BGM
• Set all slide show image
• Reset all slide show image
• USB device removal
* The mode selected in “Folder display setting”
NOTE
• When there are invalid photo files, the g mark will be
displayed for the file.
• The 3D mode icon appears on the thumbnails of 3D
images. If you do not switch to 3D mode for the 3D
images, they will be displayed in 2D.
• You can see the file name, shooting date, file size and
pixel size of the selected photo on the left of the screen
(shooting date is only available in the EXIF file format).
Other useful features
When music is being played: Stop music.
When music is stopped:
All*: Return to the thumbnail selection screen.
Folder*: Return to the upper folder. When the
top folder is displayed, return to the thumbnail
selection screen.
Viewing enlarged photos
Buttons for enlarged photo display operation
(When using USB media mode)
Buttons
Description
c/d
(Cursor)
Go to the previous/next photo in the same
directory.
6
3D
R button
G button
Return to the thumbnail selection screen.
B button
p
Switch between 2D and 3D modes.
Rotate the photo by 90 degrees to the left.
Rotate the photo by 90 degrees to the right.
Display “USB media menu”.
• USB device removal
Reveal/hide the guide display.
NOTE
• Rotating photos only applies to the temporarily selected
item and this setting is not saved.
Slide show
E Selecting the BGM
Setup the slide show BGM from “USB media menu”
by pressing B when selecting photo thumbnails.
This function is available only for the USB media
mode.
6
R button
G button
Y button
B button
NOTE
• Slide show BGM will be reset in the cases below.
• Select “Reset all BGM” by pressing B during
selecting music files.
• Go back to the top menu.
• Change the “INPUT”.
• When there are invalid music files, the g mark will be
displayed for the file.
• The displayed play time may differ slightly from the
actual play time depending on the files.
E
Slide show
Buttons for slide show operation
(When using USB media mode)
Buttons
B button
p
Buttons
Description
;
When selecting a music file: Play music.
a/b/c/d
(Cursor)
Select a desired item.
Select/deselect items (✔ mark appears on the
selected items).
All*: Stop music.
Folder*: Move to the thumbnail selection screen.
Play/pause music.
Display “USB media menu”.
• Set all BGM
• Reset all BGM
• USB device removal
* This screen image is for the USB media mode. It
may be slightly different in the Home network mode.
* The mode selected in “Folder display setting”
6
3D
Buttons for slide show BGM select operation
Music mode
Buttons for music mode
(When using USB media mode)
Buttons
When selecting a music file: Play music.
a/b/c/d
(Cursor)
Select a desired item.
6
When music is being played: Stop music.
When music is stopped:
All*: Return to the previous screen.
Folder*: Return to the upper folder. When the
top folder is displayed, return to the top menu
screen.
R button
Description
Return to the previous operation.
Switch between 2D and 3D modes.
Display “USB media menu”.
• Select slide show interval
• USB device removal
Reveal/hide the guide display.
Description
;
G button
Y button
B button
Select/deselect items (✔ mark appears on the
selected items).
All*: Stop music.
Folder*: Stop music and move to the top menu
screen.
Play/pause music.
Display “USB media menu”.
• Set all auto play
• Reset all auto play
• USB device removal
NOTE
* The mode selected in “Folder display setting”
• The selected BGMs are played repeatedly.
• The slide show continues until you press 6.
• Depending on the photo, the slide show interval per
photo may be longer than the interval selected in the
settings.
NOTE
56
• When there are invalid music files, the g mark will be
displayed for the file.
• The displayed play time may differ slightly from the
actual play time depending on the files.
Other useful features
Video mode
Buttons for file selecting operations
(When using USB media mode)
Buttons
Buttons for playing mode
(When using USB media mode)
Buttons
;
Description
When video is being played: Pause the video.
When video is paused: Play the video.
Description
When selecting a folder icon: Enter this
directory.
When selecting a video file: Play the video.
a (Cursor)
Go to the beginning of a file by pressing a once
and the previous file by pressing a twice.
b (Cursor)
Go to the next file.
a/b/c/d
(Cursor)
Select a desired item.
c/d
(Cursor)
Reverse/fast forward a video.
6
All*: Return to the previous screen.
Folder*: Return to the upper folder. When the
top folder is displayed, return to the top menu
screen.
6
3D
Select/deselect items (✔ mark appears on the
selected items).
All*: Folder*: Move to the top menu screen.
Play the video file from the top of the file.
Display “USB media menu”.
• Set all auto play
• Reset all auto play
• USB device removal
G button
Y button
;
R button
G button
Y button
B button
* The mode selected in “Folder display setting”
R button
B button
0–9
p
Go back to the file selection screen.
Switch between 2D and 3D modes.
Start playback from the previously stopped
scene.
Stop a video.
Display the USB control panel.
Display “USB media menu”.
• Title (edition)
• Chapter
• Show video information
• USB device removal
Jump to scenes at 10% increments (0%–90%).
• Limited to files without chapters.
Reveal/hide the guide display.
NOTE
• Reverse/fast forward continues from one file to another
during continuous playback.
• Instead of pressing buttons on the remote control unit,
the operations above are also available on the screen
with the control panel. You can display this control
panel by pressing CONTROL on the remote control
unit or select “Control (USB media)” or “Control (Home
network)” from “TV Menu” > “Setup” > “Option” >
“Option for view”.
• The buttons in the EXT MEDIA on the remote control
unit perform the same operations as those on the
control panel.
57
Disconnecting the USB device
When you disconnect the USB device, be sure to
the following steps.
1 Press B on the remote control unit.
• Display “USB media menu”.
2 Press a/b to select “USB device removal”, and
3
then press ;.
Press c/d to select “Yes”, and then press ;.
3D mode
You can view photos in 3D mode.
1 Press B to display the “USB media menu”
screen.
2 Press a/b to select “3D display”, and then
press ;.
• See pages 68_77 for details on the 3D function.
NOTE
• In 3D mode, you cannot rotate the photos.
• You can select “3D display” from “USB media menu”
only when the thumbnails screen for the photo mode in
USB media mode is displayed on the screen.
Other useful features
Video file format
View setting
DivX® setup
File
extension
This is the function to confirm your registration code.
You need to register the code at www.divx.com.
Go to “TV Menu” > “Setup” > “View setting” >
“DivX® setup”.
E DivX® VOD registration
You can find your registration code on this menu.
You need to register the TV at www.divx.com before
playing the DivX content.
E DivX® VOD deregistration
You can find your deregistration code on this menu.
You need to deregister the TV at www.divx.com to
release the registration.
.avi
.mkv
.asf
.wmv
USB device compatibility
USB device
File system
Photo file
format
Music file
format
Subtitle file
format
USB memory, USB card reader (Mass
Storage class), USB HDD
FAT/FAT32, NTFS
JPEG (.jpg) (DCF2.0 compliant),
MP (.mpo) (CIPA DC-007)
MP3 (.mp3)
Bitrate: 32 k, 40 k, 48 k, 56 k, 64 k, 80 k,
96 k, 112 k, 128 k, 160 k, 192 k, 224 k,
256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k, 48 kHz
FLAC (.flac)
Bitrate: 128 kbps – 2304 kbps
Sampling frequency: 8 k, 16 k, 22.05 k,
24 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 kHz
WMA (.wma)
Bitrate: 32 kbps – 192 kbps
Sampling frequency: 8 k, 11.025 k, 16 k,
22.05 k, 32 k, 44.1 k, 48 kHz
SRT/SUB/ASS/SSA/SMI
.mp4
.mov
.mpg
.mpeg
.flv
Container
AVI
MKV
ASF
MP4
Video
DivX
3.11/4.x/5.1/6.0
XviD
H.264
MPEG4
Motion Jpeg
DivX
3.11/4.x/5.1/6.0
XviD
H.264
MPEG4
DivX
3.11/4.x/5.1/6.0
XviD
MPEG4
VC-1
Windows Media
Video v9
H.264
MPEG4
Motion Jpeg
PS
MPEG2
MPEG1
FLV
Sorenson
H.264
Home network server compatibility
Audio
MP3
Dolby Digital
DTS
LPCM
ADPCM
MP3
Dolby Digital
DTS
LPCM
ADPCM
MP3
Dolby Digital
LPCM
WMA
MP3
Dolby Digital
Dolby Digital Plus
AAC
Dolby Digital
MPEG
LPCM
MP3
AAC
Photo file format
Music file format
Video file format
JPEG
LPCM, MP3
MPEG2-PS, MPEG2-TS, WMV, ASF,
MP4, MOV, AVI
NOTE
• Progressive format jpeg files are not supported.
• Some video file formats may not be played depending
on the file and server.
Selecting the picture size for video
mode
You can select the picture size in “Video mode”.
1 Select “Video mode”.
• Refer to Selecting modes and drives/servers on
page 55.
2 Press f.
• The “Wide mode” menu displays.
3 Press f or a/b to select the desired item.
• As you toggle the options, each is immediately
reflected on the screen. There is no need to press
;.
EXAMPLE
NOTE
•
•
•
•
Progressive format jpeg files are not supported.
Files in USB 1.1 devices may not be played properly.
Operation using USB hubs is not guaranteed.
Some video file formats may not be played depending
on the file.
• Some USB devices may not work properly depending
on the file system.
Auto
Original
Full
58
Item
Keeps the original aspect ratio in a
full screen display.
Keeps the original aspect ratio and
size.
An image fully fills the screen.
Connecting a PC
Connecting a PC
PC
HDMI connection
PC
Displaying a PC image on the TV
Analogue connection
PC terminal*
Selecting the picture size
You can select the picture size.
1 Press f.
HDMI 1, 2, 3 or 4 terminal
• The “Wide mode” menu displays.
2 Press f or a/b to select the desired item.
q
n
HDMI-certified cable (commercially available)
PC
RGB cable
(commercially
available)
r
PC
ø 3.5 mm stereo
minijack cable
(commercially
available)
EXAMPLE
PC terminal*
HDMI 2 terminal*
Normal
Normal
s
o
ø 3.5 mm stereo
minijack cable
(commercially
available)
p
DVI/HDMI cable
(commercially
available)
* When using the HDMI 2 terminal, you must select the
proper item in the “Audio select” menu depending on
the type of HDMI cable connected (refer to page 47 for
details).
DVI/RGB conversion
cable
(commercially
available)
t
ø 3.5 mm stereo
minijack cable
(commercially
available)
* When using the PC terminal, you must select
“Video+Audio” in the “Audio select” menu (refer to page
47 for details).
NOTE
• For PC-connection via the PC terminal, a cable with
ferrite cores is recommended.
• The PC input terminals are DDC 2B-compatible.
• Refer to page 61 for a list of PC signals compatible with
the TV.
59
Cinema
Full
Dot by Dot
Full
Item
Keeps the original aspect ratio in a full
screen display.
For letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
An image fully fills the screen.
Displays an image with the same
number of pixels on the screen.
NOTE
• You can also select an item from the “Wide mode” menu
(Page 46).
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• You may not be able to change the wide mode while in
3D mode.
• Refer to page 46 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
• The PC terminal is not compatible with 480i/576i/1080p
signals.
Connecting a PC
Adjusting the PC image
automatically
Adjusting the PC image manually
Option
Fine sync.
Option
Auto sync.
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available DVI/RGB conversion
cable, etc.
1 Press b to select “PC” from the “INPUT”
menu, and then press ;.
2 Go to TV Menu” > “Setup” > “Option” >
“Terminal setting” > “PC signal setting” > “Auto
sync.”.
NOTE
• When “Auto sync.” is successful, “Auto Sync completed
successfully” displays. If not, “Auto sync.” failed.
• “Auto sync.” may fail even if “Auto Sync completed
successfully” displays.
• “Auto sync.” may fail if the PC image has low resolution,
has unclear (black) edges, or is moved while executing
“Auto sync.”.
• Be sure to connect the PC to the TV and switch it on
before starting “Auto sync.”.
• “Auto sync.” can be executed only when inputting
analogue signals through the PC terminal.
• This function is available for 3D images converted from
2D images or normal 2D images.
Ordinarily you can easily adjust the picture as
necessary to change image position using “Auto
sync.”. In some cases, however, manual adjustment
is needed to optimise the image.
1 Press b to select “PC” from the “INPUT”
menu, and then press ;.
2 Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “PC signal setting” > “Fine
sync.”.
3 Press a/b to select the specific adjustment
item.
4 Press c/d to adjust the item to the desired
position.
H-Pos.
V-Pos.
Clock
Phase
Item
Centres the image by moving it to the
left or right.
Centres the image by moving it up or
down.
Adjusts when the image flickers with
vertical stripes.
Adjusts when characters have low
contrast or when the image flickers.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
;.
• “Clock” and “Phase” in the “Fine sync.” menu can be
adjusted only when inputting analogue signals through
the PC terminal.
• This function is available for 3D images converted from
2D images or normal 2D images.
60
Connecting a PC
PC compatibility chart
Resolution
Horizontal
frequency
Vertical
frequency
Analogue
(D-Sub)
Digital
(HDMI)
VESA
standard
VGA
640 x 480
31.5 kHz
60 Hz
✔
✔
✔
SVGA
800 x 600
37.9 kHz
60 Hz
✔
✔
✔
XGA
1,024 x 768
48.4 kHz
60 Hz
✔
✔
✔
WXGA
1,360 x 768
47.7 kHz
60 Hz
✔
✔
✔
64.0 kHz
60 Hz
✔
✔
✔
65.3 kHz
60 Hz
✔
✔
✔
75.0 kHz
60 Hz
✔
✔
✔
67.5 kHz
60 Hz
✔
✔
SXGA
SXGA+
UXGA
1080p
1,280 x
1,024
1,400 x
1,050
1,600 x
1,200
1,920 x
1,080
VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA are registered trademarks
of International Business Machines Corporation.
NOTE
• This TV has only limited PC compatibility, correct operation can only be guaranteed if
the video card conforms exactly to the VESA 60 Hz standard. Any variations from this
standard will result in picture distortions.
61
Connecting a PC
PC control of the TV
Command format
IP Control setup
Eight ASCII codes +CR
• When a programme is set, the TV can be controlled
from the PC using RS-232C or IP. The input signal (PC/
video) can be selected, the volume can be adjusted and
various other adjustments and settings can be made,
enabling automatic programmed playing.
• Use an RS-232C serial control cable (cross type),
ETHERNET cable (commercially available) or wireless
LAN USB adapter for the connections.
NOTE
• This operation system should be used by a person who
is accustomed to using PCs.
1
2
3
4
5
6
Go to “HOME” > “IP Control” > select “Change”.
To use IP Control, select “Enable”.
Set the device name.
Set your login ID and password.
Set the port to use with IP Control.
Confirm the settings, and then press “OK”.
Communication conditions for RS-232C
RS-232C serial control cable (cross type)
(commercially available)
ETHERNET cable (commercially available)
Connect to the TV with the following settings made
for IP on the PC.
IP protocol
Host IP address
Service
TCP port#
TCP/IP
Set the IP address on the TV
menu
None (Do not select Telnet
or SSH)
Set a port number on the TV
menu (Control port)
When you set your ID and password on the TV
menu, you need to enter them as soon as you
connect to the TV.
NOTE
• The connection will be cut off when there has been no
communication for 3 minutes.
n
n
o
p
P4
o
p
Command four digits: Command. The text of
four characters.
Parameter four digits: Parameter 0_9, blank, ?,
minus
Return code (0DH): ?
Parameter
Communication conditions for IP
LAN
C1 C2 C3 C4 P1 P2 P3
Set the RS-232C communications settings on the
PC to match the TV’s communications conditions.
The TV’s communications settings are as follows:
Baud rate
Data length
Parity bit
Stop bit
Flow control
Input the parameter values, aligning left, and fill with
blank(s) for the remainder (be sure that four values
are input for the parameter).
When the input parameter is not within an adjustable
range, “ERR” returns (refer to “Response code
format”).
0
9,600 bps
8 bits
None
1 bit
None
Communication procedure
Send the control commands from the PC via the
RS-232C connector.
The TV operates according to the received
command and sends a response message to the
PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
Make sure to send “A” with the carriage return and
confirm that “ERR” returns before operating.
0
0
0
1
0
0
0
0
5
5
When “?” is input for some commands, the present
setting value responds.
?
?
?
?
Response code format
Normal response
O
K
Return code (0DH)
62
9
Problem response
(communication error or
incorrect command)
E
R
R
Return code (0DH)
Connecting a PC
Command list
CONTROL
ITEM
COMMAND PARAMETER CONTROL CONTENTS
POWER
SETTING
P O W R 0
INPUT
SELECTION A
I
CHANNEL
T G D _
_
_
_
_ POWER OFF
(STANDBY)
AV MODE
SELECTION
_ INPUT SWITCHING
(TOGGLE)
CONTROL
ITEM
COMMAND PARAMETER CONTROL CONTENTS
SURROUND
COMMAND PARAMETER CONTROL CONTENTS
A V M D 0
_
_
_ TOGGLE
A C S U 0
_
_
_ SURROUND TOGGLE
A V M D 1
_
_
_ STANDARD
A C S U 1
_
_
_ SURROUND ON
A V M D 2
_
_
_ MOVIE
A C S U 2
_
_
_ SURROUND OFF
A V M D 3
_
_
_ GAME
A C S U 4
_
_
_ SURROUND 3D HALL
A V M D 4
_
_
_ USER
A C S U 5
_
_
A V M D 5
_
_
_ DYNAMIC (Fixed)
_ SURROUND 3D
MOVIE
A C S U 6
_
_
_ SURROUND 3D
STANDARD
A C S U 7
_
_
_ SURROUND 3D
STADIUM
I
T V D _
_
_
_ TV (CHANNEL FIXED)
I
D T V
_
_
_
_ DTV (CHANNEL
FIXED)
I
A V D
*
_
_
_ EXT 1_3 (1_3), HDMI
1_4 (4_7), PC (8)
A V M D 6
_
_
_ DYNAMIC
A V M D 7
_
_
_ PC
D C C H
*
*
_
_ TV DIRECT CHANNEL
(1_99)
A V M D 8
_
_
_ x.v.Colour
A V M D 1
4
_
_ STANDARD (3D)*2
C H U P
_
_
_
_ CHANNEL UP
AUDIO CHANGE A C H A
A V M D 1
5
_
_ MOVIE (3D)*2
C H D W _
_
_
_ CHANNEL DOWN
SLEEP TIMER
A V M D 1
6
_
D T V D
*
*
_ THREE DIGIT DIRECT
CHANNEL (1_999)
(Non-Nordic countries)
A V M D 1
0
VOLUME
V O L M *
POSITION
H P O S
V P O S
C L C K
D T V D
I
*
*
D E G _
D S C 1
D S C 2
D S C 3
D S C 4
*
*
*
*
*
_
*
*
*
*
*
_
*
*
*
*
* FOUR DIGIT DIRECT
CHANNEL (1_9999)
(Nordic countries
only)*1
_
_
_
_ TOGGLE
O F
T M 0
_
_
_ OFF
_ GAME (3D)*2
O F
T M 1
_
_
_ SLEEP TIMER 30 MIN
0
_ AUTO
O F
T M 2
_
_
*
_
_ VOLUME (0_60)
_ SLEEP TIMER
1 HOUR
*
*
*
_ H-POSITION (AV/PC)
O F
T M 3
_
_
*
*
*
_ V-POSITION (AV/PC)
_ SLEEP TIMER
1 HOUR 30 MIN
*
*
*
_ CLOCK (0_180)
O F
T M 4
_
_
_ SLEEP TIMER
2 HOUR
O F
T M 5
_
_
_ SLEEP TIMER
2 HOUR 30 MIN
P H S E
*
*
_
_ PHASE (0_40)
W I
D E
0
_
_
_ TOGGLE (AV)
* DVB-S/S2 1 DIRECT
CHANNEL (1_9999)*1
W I
D E
1
_
_
_ NORMAL (AV)
T E X T
0
_
_
_ TELETEXT OFF
W I
D E
2
_
_
_ ZOOM 14:9 (AV)
T E X T
1
_
_
_ TELETEXT ON (TOGGLE)
* DVB-S/S2 2 DIRECT
CHANNEL (1_9999)*1
W I
D E
3
_
_
_ PANORAMA (AV)
D C P G
*
*
*
W I
D E
4
_
_
_ FULL (AV/USB-Video/
Home network-Video)
_ DIRECT PAGE JUMP
(100_899)
T D C H 0
_
_
_ 3D OFF
W I
D E
5
_
_
_ CINEMA 16:9 (AV)
T D C H 1
_
_
_ 2D s 3D
W I
D E
6
_
_
_ CINEMA 14:9 (AV)
T D C H 2
_
_
_ SIDE BY SIDE
D E
7
_
_
_ NORMAL (PC)
T D C H 3
_
_
_ TOP AND BOTTOM
_ DIGITAL NETWORK
CHANGE*1
WIDE MODE
* DVB-S/S2 3 DIRECT
CHANNEL (1_9999)*1
* DVB-S/S2 4 DIRECT
CHANNEL (1_9999)*1
TELETEXT
3D
_
_
_
_ DTV CHANNEL UP
W I
D T D W _
_
_
_ DTV CHANNEL DOWN
W I
D E
8
_
_
_ CINEMA (PC)
T D C H 4
_
_
_ 3D s 2D (SIDE BY SIDE)
I
N P 1
0
_
_
_ EXT 1 (Y/C)
W I
D E
9
_
_
_ FULL (PC)
T D C H 5
_
_
_ 3D s 2D (TOP AND BOTTOM)
I
N P 1
1
_
_
_ EXT 1 (CVBS)
W I
D E
1
0
_
_ DOT by DOT (AV/PC)
T D C H 6
_
_
_ 3D AUTO
I
N P 1
2
_
_
_ EXT 1 (RGB)
W I
D E
1
1
_
_ UNDERSCAN (AV)
T D C H 7
_
_
W I
D E
1
2
_
_ AUTO (USB-Video/
Home network-Video)
_ 3D s 2D*2
DEVICE NAME
T V N M 1
_
_
_ DISPLAY THE DEVICE
NAME
W I
D E
1
3
_
_ ORIGINAL (AV/USBVideo/Home networkVideo)
SOFTWARE
VERSION
S W V N 1
_
_
_ DISPLAY THE
SOFTWARE VERSION
M U T E
0
_
_
_ TOGGLE
IP PROTOCOL
VERSION
I
_
_
_ DISPLAY THE IP
PROTOCOL VERSION
M U T E
1
_
_
_ MUTE
M U T E
2
_
_
_ MUTE OFF
D T U P
INPUT
SELECTION B
_
CONTROL
ITEM
MUTE
63
I
J
P P Y 1
857 series only
These commands are available only during 3D mode.
Network setup
Connecting to the network
To enjoy internet services, you need to connect the
TV to a router with a high speed connection to the
internet. You can also connect the TV to your Home
network server through a router or access point. The
TV connection to the router can either be wired or
wireless.
4 Press a/b to select “Wired”, and then press
Wired installation
;.
Use an ETHERNET cable to connect the ETHERNET
terminal on the TV to your broadcast router as
shown below. This is recommended when enjoying
services which require stable connection speeds,
such as streaming media.
E Wired connection overview
NOTE
• If you choose a wired connection to the router, you need
an ETHERNET cable (commercially available).
• If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask
your internet service provider or telephone company.
• An Ethernet and wireless connection cannot be used at
the same time. Use only one of the connection types.
• A wireless LAN connection and performance cannot
be guaranteed for all residential environments. In the
following cases, the wireless LAN signal may be poor or
drop, or the connection speed may become slower.
− When used in buildings made with concrete,
reinforced steel, or metal
− When placed near objects that obstruct the signal
− When used with other wireless devices that emit the
same frequency
− When used in the vicinity of microwave ovens and
other devices that emit a magnetic field, electrostatic
charge, or electromagnetic interference
• A stable connection speed is required to play back
streaming content. Use an Ethernet connection if the
wireless LAN speed is unstable.
• Please use Category 5 ETHERNET cable.
5 Confirm the message on the screen and then
press ; to go to the next step.
6 Perform “Connection test” after the connection
7
is completed. Press c/d to select “Yes”, and
then press ;.
The connection test result will be displayed on
the screen. Follow the on-screen instructions for
the settings after this step.
• If you want to change the IP settings manually, go
to “Network setup” > “Manual setup” > “IP setup”
and follow the on-screen instructions and the
operation manual of the router.
n
o
p
q
E
PC
Router (commercially available)
ETHERNET cable (commercially available)
Network
How to connect
Router
ETHERNET terminal
LAN
n
ETHERNET cable (commercially available)
1 Switch on the router (commercially available).
2
3
Refer to the router’s operation manual for
switching on.
Connect the ETHERNET terminal on the TV
to the router (commercially available) with an
ETHERNET cable (commercially available).
Go to “Network setup” > “Auto setup”, and then
press ;.
64
Network setup
Wireless installation
E
NOTE
How to connect
Use the wireless LAN USB adapter supplied with the
TV.
E Wireless connection overview
1 Switch on your router before starting the
network installation.
2 Connect the wireless LAN USB adapter
n
o
p
q
PC
Wireless LAN router/access point
Wireless LAN USB adapter (supplied)
Network
NOTE
• When using the SHARP wireless LAN USB adapter
(supplied), try to provide as much free space around the
device for best performance.
• Make sure the firewalls in your network allows access to
the TV wireless connection.
• Operations cannot be guaranteed when used with
access points that do not have Wi-Fi® certification.
• A wireless LAN access point is required to connect
the TV to the Internet using a wireless LAN. See the
operation manual of your access point for setup.
(supplied) to the USB 3 (WIRELESS LAN) port on
the rear of the TV.
• Do not use a wireless LAN adapter other than
the supplied SHARP wireless LAN adapter, as
operations cannot be guaranteed.
3 Go to “Network setup” > “Auto setup”, and then
press ;.
NOTE
• Follow the on-screen instructions when setting
manually.
Go to “Network setup” > “Manual setup”.
4 Press a/b to select “Wireless”, and then press
;.
5 Confirm the WPS location and then press ; to
go to the next step.
6 Perform “Connection test” after the connection
7
is completed. Press c/d to select “Yes”, and
then press ;.
The connection test result will be displayed on
the screen. Follow the on-screen instructions for
the settings after this step.
65
• When not using “Push button”, perform the settings
from “Network setup” > “Manual setup” > “Connection
type”.
• To connect your TV to the internet, you must have a
broadband internet connection.
• If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask
your internet service provider or telephone company.
• There is no need to enter the security key for
subsequent connections to the wireless network.
• If your access point is set to a stealth mode (that
prevents detection by other devices), you may not be
able to establish a connection. In this case, disable the
stealth mode on the access point.
• If you want to change the IP settings manually, go to
“Network setup” > “Manual setup” > “IP” setup” and
follow the on-screen instructions and the operation
manual of the router.
• See page 85 to check the supplied SHARP wireless LAN
adapter specifications.
Net TV
What is Net TV?
Net TV offers internet service and websites tailored
for your TV. Use the TV remote control unit to
browse the Net TV internet pages. Net TV allows you
to play movies, view pictures, listen to music, play
games, rent a movie from a video store* and much
more. Net TV provides variety of services for each
country. You can browse other countries’ service as
well. If a service is unsuitable for children, you can
lock it as needed.
Operations in Net TV
Basic operation
The illustrations on this page are for explanation
purposes. They are subject to change without
notice.
Press CONTROL and the option menu displays.
Press a/b to select the desired menu item, and
then press ;.
E User setting
Changes some settings, such as lock/unlock the
service, for Net TV.
NOTE
• This may not function for some services.
1 Select “User setting”, and then press ;.
2 Press a/b/c/d to select the desired
* Video store can only be used with country-exclusive
special Net TV services.
operation, and then press ;.
NOTE
• Because Net TV is an online system, it can be modified
over time to better serve its purpose.
• Some Net TV services may be added, changed or
discontinued after some time.
• Some open internet websites may not be tailored for a
TV screen and may not be displayed correctly.
• You cannot download and save files nor install plug-ins.
Option menu
E
Display the start page
Go to “HOME” > “AQUOS NET+”.
DISCLAIMERS
NOTE
• SHARP corporation bears no responsibility regarding
the content and quality of the content provided by the
content serve provider.
E
• When switching to Net TV, a message which requests a
software update may display in some cases.
E Control panel
Displays an on-screen control panel for watching
online contents.
1 Select “Control panel”, and then press ;.
2 Press a/b/c/d to select the desired
operation, and then press ;.
3 Press > to exit.
Select a service
Press a/b/c/d to select the desired service,
and then press ;.
• Press :r/s to scroll pages up/down (This may
not function for some services).
• Press 6 to return to the previous page (This may
not function for some services).
• Press > to return to the Net TV start page.
E
Exit Net TV
Press ATV/DTV/SAT.
• You can exit from Net TV by pressing b and
select another input source.
Buttons
I
H
F
J
G
Description
Playback
Stop
Pause
Fast forward
Reverse
NOTE
• These operations can also be done by pressing the
corresponding buttons (I/H/F/J/G) on the
remote control unit.
• The control panel may not function on some services.
66
Net TV
E Reload
Refreshes the page you are browsing. If an error
occurs while loading the page, execute this function
and reload it.
Select “Reload”, and then press ;.
E Zoom
Adjusts the display size of the page you are
browsing.
Zoom
[100] 20
: Adjust
400
END : Exit
1 Select “Zoom”, and then press ;.
2 Press c/d to adjust the display size.
3 Press > to exit.
E Security info.
Shows information regarding the security of the
page you are browsing.
1 Select “Security info.”, and then press ;.
2 Select “OK” or press > to exit.
Inputting texts
Use the software keyboard (Page 14) when you need
to input text.
Clear Net TV memory
You can clear the Net TV memory, which includes
the lock code, passwords, cookies and browsing
history.
Go to “TV Menu” > “Setup” > “View setting” >
“Net TV setting” > “Clear Net TV memory”.
NOTE
• PIN input is required when executing “Clear Net TV
memory”. The default PIN is “1234”. To change the PIN
setting, refer to Individual setting — PIN (Page 44).
To reset the PIN setting (PIN input will no longer be
needed), refer to Reset the PIN (Page 79).
• This function is available only while browsing Net TV.
CAUTION
• If you exercise this operation, Net TV will be completely
initialized. If there is important information for you, take
notes before executing.
Video store
Rent and download a video
With Net TV, you can rent a video from “Video
store”. In most cases, you can rent a video for 1 day,
for a couple of days, or just 1 hour.
1 Select the desired video store service and press
;.
2 Select the desired item on the video store page
and press ;.
• The procedure to select and rent a video varies
according to store.
3 Make the online payment.
• The store will ask you to login or create a new
account if you don’t have one. The login might
consist of your e-mail address and PIN code.
You can enjoy watching your favourite movies from
an online rental video store with Net TV.
NOTE
• Video store can only be used with country-exclusive
special Net TV services.
SD card
4 Download the video.
• During the download, you can continue watching
normal programmes until the TV notifies you that
the download is completed.
5 With your login, select the store where you
An SD memory card (commercially available) is
required to rent and download a video from the
video store. Be sure to use an SDHC (High capacity)
card with a minimum of 4 GB memory (Class 6 is
recommended).
1 Insert the SD card into the SD CARD (VIDEO
STORE) slot.
2 The TV automatically starts formatting the SD
card.
3 Leave the card in the slot when finished
formatting.
NOTE
• A high-speed internet connection to the TV is also
required to rent and download a video.
• For HD movies, a minimum of 8 GB memory will be
needed.
• The TV could reject the SD card if the write speed is
insufficient for video transfer.
• SD cards are sold separately.
• Some SD cards may not work properly for this function.
67
6
rented the video and press ;.
Select the rented video and press ; to play.
NOTE
• This service is exclusive to some areas.
• When you are creating the account, you can choose the
payment method. Consult each video store website for
more information on the payment terms.
• To enter a number code (PIN), use the numbers on the
remote control.
• To enter an e-mail address, select the text field on the
page and press ;. Select a character on the keyboard
and press ; to enter it.
• Even if a download has been cancelled, the video can
still be downloaded until the rental period expires.
• Register an SD card using the following procedure when
the screen prompt pops up:
Go to “TV Menu” > “Setup” > “View setting” > “Net TV
setting” > “SD card registration”.
Enjoying 3D image viewing
You can enjoy 3D-supported images on this TV when you wear 3D glasses (AN3DG40), sold separately.
To produce 3D images, liquid crystal shutters in the 3D glasses alternately open
and close imperceptibly fast to exactly match alternating left and right video
images displayed by the TV.
NOTE
• Refer to the operation manual of the 3D glasses for details regarding usage.
• Some menu items are greyed out in 3D mode. This is not a malfunction.
Before using the 3D glasses
• Not all consumers can experience and enjoy 3D TV. Some people suffer from stereo
blindness which prevents them from perceiving the intended depth of 3D entertainment.
Also, some people who watch 3D programming may experience initial feelings of
motion sickness as they adjust to the picture. Others may experience headaches, eye
fatigue or motion sickness. Some viewers might also experience epileptic seizures. Like
a roller coaster, the experience is not for everyone.
• The 3D glasses are precision equipment. Handle them with care.
• Improper use of the 3D glasses or failure to follow these instructions can result in eye
strain.
• If you experience dizziness, nausea, or other discomfort while viewing 3D images,
immediately discontinue use of the 3D glasses. Using the 3D TV with incompatible 3D
broadcasts or software can make images appear blurry or create overlapping images.
• When viewing 3D images continuously, be sure to take a break periodically to prevent
eye strain.
• If you are nearsighted or farsighted or have astigmatism or a different level of eyesight
between the left and right eyes, you should take the necessary steps, such as wearing
eyeglasses, to correct your eyesight before viewing 3D images. The 3D glasses can be
worn over eyeglasses.
• When viewing 3D images, keep the 3D glasses horizontally level with the TV screen. If
you tilt the 3D glasses with respect to the TV screen, the images viewed by the left and
right eyes may appear significantly different or images may appear overlapping.
• View 3D images at the appropriate distance from the TV screen. The recommended
distance is three times the effective height of the TV screen.
• Be careful of your surroundings when viewing 3D images. When you view 3D images,
objects may appear closer or farther than they are. This may cause you to misjudge the
distance and possibly result in injury if you accidentally hit the screen or surrounding
objects.
• The 3D glasses are not recommended for people aged less than 6.
• When children are viewing 3D images, be sure a parent or guardian is present. Monitor
children viewing 3D images, and if they show signs of discomfort, immediately
discontinue use of the 3D glasses.
• People with a known history of photosensitivity and people with heart problems or poor
health should not use the 3D glasses. This can worsen existing health conditions.
• Do not use the 3D glasses for other purposes (such as general eyeglasses, sunglasses,
or protective goggles).
• Do not use the 3D function or 3D glasses while walking or moving around. This may
result in injuries due to running into objects, tripping, and/or falling.
• When using the 3D glasses, take care not to accidentally strike the TV screen or other
people. Viewing 3D images may cause you to misjudge the distance to the TV screen
and accidentally strike the screen, resulting in possible injury.
• It is recommended that you do not view 3D images if you are sleep deprived or if you
have been drinking alcohol.
indicates compatibility between TV products and 3D Glasses which
are compliant with the “Full HD 3D Glasses™” format, and does not indicate
picture quality of TV products.
68
Enjoying 3D image viewing
Preparing for the 3D glasses
1
Part Names
n o
Supplied accessories
Make sure the following accessories are provided
with the 3D glasses.
3D glasses x 1
Nose pad*
(small x 1, large x 1)
Glasses case x 1
Cleaning cloth x 1
p
Operation manual
* Use the 3D glasses nose pad as needed. The small
nose pad is already attached.
n
o
p
Power button
LED indicator
Nose pad
NOTE
• The illustrations above are for explanation purposes and
may vary slightly from the actual accessories.
NOTE
• The power turns off automatically in the following cases:
− When pairing fails
− When the 3D glasses are not operated in standby for
15 seconds
69
Power button
• When the power button is pressed for 2 or more
seconds with the power off, pairing with the TV
starts.
• When the power button is pressed for 2 or more
seconds with the power on, the power turns off.
• When paired, the power will turn off if the power
button is pressed for 2 or more seconds.
• When the power button is pressed for less than 2
seconds with the power off, the 3D glasses will turn
to standby.
• When the 3D glasses are in 3D mode with the
power on, pressing the power button for less than 2
seconds will turn the 3D glasses to 2D mode.
• When the 3D glasses are in 2D mode with the power
on, pressing the power button for less than two
seconds will turn the 3D glasses to 3D mode.
• When paired, the 3D glasses will be non-reactive if
the power button is pressed for less than 2 seconds.
2 LED light
• When paired with the TV, the LED light blinks in red
and green.
• When pairing is completed successfully, the LED
blinks in green for 3 seconds.
• When the power is turned on, the LED lights up in
green for 3 seconds.
• When in 3D mode, the LED blinks in green in
3-second intervals.
• When in 2D mode, the LED blinks in red in 3-second
intervals.
• When the power is turned off, the LED blinks in
green 3 times.
NOTE
• When in low voltage mode:
− When in 3D mode, the LED blinks in green in
3-second intervals.
− When in 2D mode, the LED blinks in red in
3-second intervals.
3 Nose pad mount
• The dedicated nose pad can be mounted here.
Enjoying 3D image viewing
Using the 3D glasses
Using the 3D glasses
Switching to 3D and 2D Mode
When viewing 3D images, you can press the power
button to switch between 2D and 3D modes. This is
useful when several people are viewing 3D images
on the same TV with some people wanting to watch
in 3D and some people wanting to watch in 2D.
E Viewing 2D images
Before using the 3D Glasses
Before using the 3D glasses for the first time,
remove the insulating sheet attached to them.
When you press and hold for less than 2
seconds while viewing 3D images, the LED light
blinks in red and the 3D images switch to 2D
images.
E
Pairing the 3D glasses
Attaching the Nose Pad
Attach either of the supplied nose pads as needed
(such as when the glasses do not fit properly). The
glasses come with a large and small nose pad.
To view 3D images, it is necessary to pair the 3D
glasses and TV.
• To confirm pairing of the 3D glasses and TV, make sure
that 3D images are displayed on the TV screen.
• When the power button is pressed for 2 or more
seconds with the power off, pairing with the TV starts.
When pairing is completed successfully, the LED blinks
in green for 3 seconds.
• To switch between 2D and 3D modes, briefly press the
power button.
50 cm–2 m
Removing the nose pad
Attaching the nose pad
NOTE
• When paired, make sure that the 3D glasses are kept
at a distance of 50 cm–2 m from the TV. If too close,
pairing cannot be performed.
70
Viewing 3D images
When you press and hold for less than 2
seconds while viewing 2D images, the LED light
blinks in green and the 2D images switch to 3D
images.
Usage Range of the 3D Glasses
The 3D glasses can be used by receiving a signal
sent from the TV.
The 3D glasses turn off automatically after 15
seconds if no signal is received from the TV.
E Operating range
From directly the TV: approx. 5 m (within approx. 30°
horizontally and 20° vertically)
Enjoying 3D image viewing
Replacing the Battery
The battery has an expected service life of
approximately 75 hours.
• When replacing the button battery, use only the
designated battery (Maxell branded CR2025 lithium
button battery).
3 Replace the battery.
1 Use the tip of a ballpoint pen or similar object
to remove the battery.
2 Insert a new battery.
• Insert the battery with the negative side (-)
facing up.
1 Use the tip of a ballpoint pen or similar object to
press in on the lock.
4 Align the battery holder with the battery slot on
the 3D glasses and slide it back into place.
• Press it in until it locks.
2 While pressing in on the lock, place your
fingertip in the groove and pull out the battery
holder.
• Pull the battery holder all the way out.
NOTE
• Take care not to reverse the battery poles (+) and (-)
when loading the battery.
• Used batteries should be disposed of strictly in
accordance with the applicable local laws and
regulations.
71
Enjoying 3D image viewing
Cautions for 3D image viewing
3D glasses lenses
• Do not apply pressure to the lenses of the 3D glasses. Also, do not drop or bend the 3D glasses.
• Do not scratch the surface of the lenses of the 3D glasses with a pointed instrument or other object. Doing so may
damage the 3D glasses and reduce the quality of the 3D image.
• Use only the cloth provided with the 3D glasses to clean the lenses.
Caution during viewing
• Do not use devices that emit strong electromagnetic waves (such as cellular phones or wireless transceivers) near
the 3D glasses. Doing so may cause the 3D glasses to malfunction.
• The 3D glasses cannot operate fully at extreme high or low temperatures. Please use them within the specified
usage temperature range.
• If the 3D glasses are used in a room with fluorescent lighting, the light within the room may appear to flicker. In this
case, either darken or turn off the fluorescent lights when using the 3D glasses.
• Wear the 3D glasses correctly. 3D images will not be correctly visible if the 3D glasses are worn upside down or
back-to-front.
• Other displays (such as computer screens, digital clocks, and calculators) may appear dark and difficult to view
while wearing the 3D glasses. Do not wear the 3D glasses when watching anything other than 3D images.
• If you lie on your side while watching the TV with 3D glasses, the picture may look dark or may not be visible.
• Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D images. Otherwise,
you may not be able to enjoy the full 3D effect.
• The 3D glasses may not work properly if there is any other 3D product or electronic devices turned on near the
glasses or TV. If this occurs, turn off the other 3D product or electronic devices or keep the devices as far away as
possible from the 3D glasses.
• Stop using this product in any of the following situations:
– When images consistently appear doubled while you are wearing the 3D glasses
– When you have difficultly perceiving the 3D effect
• If the 3D glasses are faulty or damaged, stop using them immediately. Continued use of the 3D glasses may cause
eye fatigue, headaches and illness.
• If you have any abnormal skin reaction, stop using the 3D glasses. In very rare instances, such reactions may be due
to an allergic reaction to the coating or materials used.
• If your nose or temples become red or you experience any pain or itchiness, stop using the 3D glasses. Pressure
caused by long periods of use may lead to such reactions and may result in skin irritation.
• You may not be able to use several menu items while you are watching the TV in 3D mode.
• You cannot use the 3D function in radio or data mode.
NOTE
• These 3D glasses are only for use with SHARP LCD TVs supporting 3D.
72
Enjoying 3D image viewing
Display format for 3D and 2D images
Image for input
signals
Selectable mode
2D s 3D
3D mode
(using the 3D
glasses)
2D mode
(without
using the 3D
glasses)
Side by Side
Description
• Converts normal 2D images into 3D images.
• Creates 3D images from 3D images displayed
side by side. The image is split into a left and right
image, and then the images are stretched and
displayed sequentially to create a 3D image.
Top and Bottom
• Creates 3D images from 3D images displayed
on the top and bottom. The image is split into a
top and bottom image, and then the images are
stretched and displayed sequentially to create a
3D image.
Side by Side s 2D
• Creates 2D images from 3D images displayed
side by side. Only the left image is stretched and
displayed. The image does not appear in 3D.
• Creates 2D images from 3D images displayed
on the top and bottom. Only the top image is
Top and Bottom s 2D
stretched and displayed. The image does not
appear in 3D.
73
Enjoying 3D image viewing
Viewing 3D images
2 Turn on the power of the 3D glasses, and then
2 Press c/d to select “3D” or “2D”, and then
press ;.
wear the 3D glasses.
NOTE
E
• If you do not want to switch to 3D mode automatically,
set “3D auto change” to “No”.
• When the TV is receiving a 3D image signal that can be
detected automatically, the 3D mode icon is displayed
in the channel display.
To view in 3D mode
1 Press c/d to select the 3D signal type (“2D
s 3D”,“Side by Side” or “Top and Bottom”),
and then press ;.
Switching 3D to 2D mode
NOTE
• Refer to the operation manual of the 3D glasses for
details regarding usage.
• The TV screen may temporarily become black when
the TV is trying to detect a 3D image signal and when
switching from 3D to 2D mode.
Receiving a 3D image signal that
can be detected automatically
The image signal may contain a 3D identification
signal. You can enable the TV to automatically
detect the 3D image type (Page 73).
1 Go to “TV Menu” > “Setup” > “Option” > “3D
setup” > “3D auto change”.
E When “3D auto change” is set to “Yes”
• The 3D display format is detected automatically and
the appropriate 3D image is displayed.
When you press 3D while you are watching the TV in
3D mode, the TV switches to 2D mode.
1 Press 3D during the 3D mode.
2 Select “Yes”, and then press ; to switch to 2D
mode.
3 Take off the 3D glasses and turn off the power of
the 3D glasses.
NOTE
• If the input signal switches to 2D, 2D images are
displayed automatically.
• 3D mode is canceled automatically when the setting
is changed, input source is changed, the input signal
resolution is changed or the power is turned off.
Top and Bottom
• If you select the same system as that of the input
signal, 3D images are displayed.
• You can select only “2D s 3D” in ATV mode.
2 Turn on the power of the 3D glasses, and
then wear the 3D glasses.
E
To view in 2D mode
• Switching from 3D to 2D mode.
Press c/d to select the 2D signal type (“Side
by Side” or “Top and Bottom”), and then press
;.
Receiving a 3D image signal that
cannot be detected automatically
When the TV receives a 3D image signal that cannot
be detected automatically, you can select between
3D and 2D image viewing.
1 Press 3D.
• A screen appears prompting you to select between
3D and 2D image viewing.
E
Side by Side
When “3D auto change” is set to “No”
1 The confirmation message is displayed.
Press 3D.
2 Press c/d to select “Yes”, and then press
;.
74
Side by Side
Top and Bottom
• If you select the same system as that of the input
signal, 2D images are displayed.
Enjoying 3D image viewing
Watching 2D images in 3D
You can convert normal 2D images into 3D images.
1 Press 3D.
2 Press c/d to select “2D s 3D”, and then press
;.
3 Turn on the power of the 3D glasses, and then
wear the 3D glasses.
3D Menu
Pressing 3D in 3D mode displays the 3D menu.
Press the coloured buttons to make the necessary
settings.
Configuring the TV settings to
enhance 3D image viewing
You can make various settings to enhance 3D image
viewing.
NOTE
• The confirmation message to select either 3D or 2D
mode is displayed on the screen once per hour.
• When the TV converts normal 2D images into 3D
images, you can display the “2D s 3D convert effect”
menu to adjust the convert effect by pressing Y.
Switching to the previous mode
You can switch back to the previous mode by
pressing 3D.
1 Press 3D.
• A confirmation message is displayed.
Buttons
R button
G button
2 Select “Yes”, and then press ;.
• The TV returns to the previous mode.
Y button
B button
Description
3D brightness boost (Page 76).
Surround (Page 39).
• The surround mode changes each
time you press G.
2D s 3D convert effect (Page 76).
• “2D s 3D convert effect” is available
only when selecting “2D s 3D”
(refer to Watching 2D images in 3D
shown to the left).
3D setup (Page 76).
3D picture adjustments
E
Basic operation
Go to “TV Menu” > “Setup” > “Picture” > select/
adjust the item you want to set.
NOTE
• Which items can be selected/adjusted differs depending
on whether the TV is in 2D mode or in 3D mode.
AV mode
The audio and video settings can be changed to suit
the programme or input content being watched.
STANDARD (3D)
MOVIE (3D)
GAME (3D)
NOTE
Item
For a highly defined image in a
normal lighting.
For a movie.
Lowers image brightness for easier
viewing.
• You can select “AV mode” by pressing # on
the remote control unit.
75
Enjoying 3D image viewing
3D brightness boost
You can adjust the backlight of the TV for 3D image
viewing.
High
Item
The screen brightens
Select the method for adjusting the 3D image effect
(depth).
Auto
Middle
Low
The screen dims
• When “High” or “Low” is selected, “OPC”, “Backlight”
and “Range of OPC” are not available.
• The “3D brightness boost” is not available for 2D mode.
• The “3D brightness boost” items can be saved for every
3D “AV mode” item (“STANDARD (3D)”, “MOVIE (3D)”,
“GAME (3D)”).
3D setup
Basic operation
Go to “TV Menu” > “Setup” > “Option” > “3D
setup” > select the menu you want to set.
3D auto change
This function allows the TV to switch to 3D mode
automatically when a 3D identification signal is
detected.
Mode1
Mode2
Off
Manual
Item
Adjusts the still image effect (depth)
automatically.
For manual adjustment of the still
image effect (depth).
NOTE
NOTE
E
NOTE
3D depth control
Item
When a 3D signal is detected, the TV
switches to 3D mode automatically.
When a 3D signal is detected, the TV
performs the 3D image detection in
addition to “Mode 1”.
Automatic change is not performed.
NOTE
• If you select “Manual”, adjust the 3D still image effect
(depth) with “Depth change”.
• This function can be adjusted when viewing 3D still
images in USB media mode.
• Even if you select “Auto”, the 3D still image effect
(depth) may not be correctly adjusted depending on the
3D still image.
• 3D still images taken in macro mode will be displayed
with excessive depth.
• If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
Depth change
You can adjust the 3D still image effect (depth).
Adjust the level from _10 to e10. “0” is the level
where no adjustment is made (factory preset value).
• This function is only available when converting 2D
images to 3D images.
• When you use this function, image conversion on the TV
will result in some differences in the original images and
how they appear.
• 2D images that have been converted to 3D images may
be viewed only for personal use.
Viewing time info
This function allows you to display the elapsed time
of 3D image viewing on the screen.
Yes
No
Item
The elapsed time is displayed in
one-hour increments after you start
watching 3D images.
Hide the time.
3D test
This function displays 3D images for testing the 3D
operation. Clicking “Start” on the screen plays back
3D test images.
NOTE
• If you press > during playback, the previous screen
will be displayed.
3D glasses control
NOTE
• This function can be adjusted when viewing 3D still
images in USB media mode.
• If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
2D s 3D convert effect
You can adjust the 3D effect when converting
images from 2D mode to 3D mode. Select a desired
level of convert effect from e1 to e16.
• 3D signals may not be detected depending on the signal
format.
76
To enable this function, set the location of the TV to
“STORE” (Page 15).
On
Off
Item
Switch on signals to the 3D glasses.
When watching 3D images, switch this
setting to “On”.
Switch off signals to the 3D glasses.
This will stop the TV from influencing
3D glasses that may be in that area of
the store.
Enjoying 3D image viewing
Specifications — 3D glasses (sold separately)
Product
Model number
Lens type
Power supply
Battery
Battery life
Dimension (W x H x D)
Weight
Operating temperature
3D Glasses
AN-3DG40
Liquid crystal shutter
DC3V
Lithium button battery (CR2025 x 1)
Approx. 100 hours of continuous use
171.2 × 46.0 × 162.4 mm
Approx. 31.0 g (including the lithium ion polymer
rechargeable battery)
10°C to 40°C (The 3D glasses cannot operate fully at extreme
high or low temperatures. Please use them within the
specified usage temperature range.)
Troubleshooting — 3D Images
Problem
• 3D images are not
displayed.
The product serial number is displayed on the 3D glasses as indicated in the illustration on
the left. The first three digits represent the date of manufacture.
Example: Manufactured on February 23, 2013
S/N : 8 2 P
• Images displayed in 3D
mode appear doubled
while you are wearing the
3D glasses.
Manufacture number
Month of
manufacture
1: 1
2: 2
3: 3
8 :8
9 :9
A : 10
B : 11
C: 12
Day of
manufacture
1: 1 A : 10
2: 2 B : 11
3: 3
H : 17
J : 18
N : 22
P : 23
W: 30
X : 31
* “I”, “O”, “Y” and “Z” are not used.
• Images displayed in 3D
mode appear 2D while
you are wearing the 3D
glasses.
Possible solution
• Is “3D auto change” set to “Off”? Press 3D to switch to
3D mode (Page 76).
• If “3D auto change” is set to “Mode1” or “Mode2” but
no 3D images are displayed, check the display format of
the content being viewed. Some 3D image signals may
not be recognized as 3D images automatically. Press
3D to select the appropriate display format for the 3D
image (Page 76).
• Is the power of the 3D glasses turned on? Press the
power button for at least 2 seconds to turn on the 3D
glasses.
• Are the 3D glasses set to 2D mode? Press the power
button for an amount of time that is less than 2 seconds
to switch the 3D glasses to 3D mode.
• Is there an obstacle between the 3D glasses and the
TV, or is something covering the receiver on the 3D
glasses? The 3D glasses operate by receiving a signal
from the TV. Do not place anything between the 3D
emitter on the TV and the receiver on the 3D glasses.
• Is the power of the 3D glasses turned on? Press the
power button for at least 2 seconds to turn on the 3D
glasses.
• Are the 3D glasses set to 2D mode? Press the power
button while viewing 2D images, the LED light blinks in
green and the 2D images switch to 3D images.
NOTE
• Please contact your local authority for the correct method of disposal of this product
and/or packing.
• For further details, refer to the operation manual of the 3D glasses.
77
Appendix
Troubleshooting
Problem
• No power.
• The TV cannot be
operated.
Possible solution
• Turn on (;) the MAIN POWER switch on the rear of the TV
(Page 19).
• Is the AC cord disconnected?
• Check if you pressed a on the TV.
• External influences such as lightning, static electricity, etc.,
may cause improper operation. In this case, operate the TV
after first turning off the power, or unplugging the AC cord
and re-plugging it in after one or two minutes.
• Remote control unit
does not operate.
•
•
•
•
• Picture is cut off.
•
•
• Strange colour,
light colour, or dark
colour, or colour
misalignment.
• Power is suddenly
turned off.
•
•
•
•
•
• No picture.
•
•
•
•
•
•
•
•
Are batteries inserted with polarity (e, f) aligned?
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminating to the remote control
sensor?
Is the image position correct?
Are screen mode adjustments (Wide mode) such as picture
size made correctly? (Pages 46, 58 and 59)
Adjust the picture tone.
Is the room too bright? The picture may look dark in a room
that is too bright.
Check the “Colour system” setting (Pages 43 and 48).
The TV’s internal temperature has increased. Remove any
objects blocking the vent or clean.
Is the “Sleep timer” set? Select “Off” from the “Sleep timer”
menu (Page 40).
Is “No signal off” or “No operation off” activated? (Page 40)
Are connections to external equipment correct?
(Pages 27_32)
Is the input signal type selected correctly after connection?
(Page 47)
Is the correct input source selected? (Page 19)
Is a non-compatible signal being input? (Page 61)
Is the picture adjustment correct? (Pages 36_38)
Is the antenna connected properly? (Page 10)
Refer to “Picture / Audio test” (Page 80).
• No sound.
• The TV sometimes
makes a cracking
sound.
• Teletext is not
displayed.
• Subtitles for teletext
are not displayed.
• Net TV start page
cannot be displayed.
• Some Internet
functions used on a
PC are not available
from the TV.
78
• Is the volume too low?
• If you do not clearly hear the sound for the visually impaired,
go to “TV Menu” > “Setup” > “Audio” > “Audio description
setting” > “Mix level”, and select the upper level to turn up
the volume.
• Make sure that headphones are not connected.
• Check if you pressed e on the remote control unit.
• Is the proper item selected in the “Audio select” menu
when connecting devices to the HDMI 2 terminal or the PC
terminal? (Pages 28, 30 and 47)
• Refer to “Picture / Audio test” (Page 80).
• This is not a malfunction. This happens when the cabinet
slightly expands and contracts according to changes in
temperature. This does not affect the TV’s performance.
• (858 series only) In some cases, teletext and subtitles
for teletext cannot be displayed when MHP is active. To
deactivate MHP, go to “TV Menu” > “View setting” > “Data
service setting” and select “Off” (Page 26).
• Is the ETHERNET cable connected correctly? (Page 64)
• Check the settings of “Network setup” (Pages 64–65).
• The TV has only limited functions compared with regular PC
browsers (Page 66).
Appendix
Reset the PIN
1 Go to “TV Menu” > “Setup”.
2 Press a/b to select “Auto installation”, “Programme setup”, “PIN”,
3
“Parental rating” or “Reset”, and then press ;. The PIN input window will
display.
Press and hold both :r and i+ on the TV simultaneously until the
message appears on the screen.
NOTE
• When the PIN code is reset, the default PIN code (“1234”) is set.
• The PIN is also available for the Net TV function.
Reset
If complex adjustments are made so that the settings cannot be restored to
normal, you can reset the settings to the factory preset values.
1 Go to “TV Menu” > “Setup” > “View setting” > “Reset”.
2 Press c/d to select “Yes”, and then press ;.
• “Now, TV will restart automatically, OK?” displays on the screen.
3 Press c/d to select “Yes”, and then press ;.
• “Now initialising...” displays on the screen and blinks.
• After the reset has completed, the power shuts off and then comes back on. The
screen will have returned to its original settings.
NOTE
• PIN input is required when executing “Reset”. The default PIN is “1234”. To change the
PIN setting, refer to Individual setting — PIN (Page 44). To reset the PIN setting (PIN
input will no longer be needed), refer to Reset the PIN shown above.
• “Reset” is greyed out in 3D mode. To select the “Reset” menu, you need to switch to 2D
mode.
79
Appendix
Updating your TV via DVB-T/T2/
C/S*/S2*
Ensure that your TV software version is always up to
date. From time to time SHARP will make updated
TV base software and DVB software available.
Downloading the software
You can select the method of update.
1 If the software is updated, the confirmation
message “New download information has been
detected.” appears.*
• If the TV receives the update service while in
standby mode, a confirmation message displays
after turning on the power.
* When the download is available only at a later time,
a confirmation message regarding the scheduled
date and time to start downloading from a TV
station will be displayed. Download information
may be displayed together with the confirmation
message.
* 857 series only
View setting
Download setup
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Standby search” >
“Download setup”.
Searching for updates*
2 Follow the screen prompts.
* All countries except UK, Sweden, Finland and Italy are
set to “No” for this function.
The TV automatically determines whether a new
software version is available when the TV is in
standby mode.
Yes
No
Now
Item
Automatically searches for new
software updates available when the
TV is in standby mode.
Does not search for update
information.
Checks if there is new software
immediately.
Yes
No
Item
Starts downloading immediately.*
It takes approximately one hour to
update. You cannot carry out other
operations while downloading.
• Cancels the download by pressing
; on the remote control unit when
“Discontinue” is displayed on the
screen during the update.
Does not perform downloading.
* The download will start at the date and time for the
scheduled download. Turn on the power of the TV
before the scheduled time for downloading or keep it in
standby mode.
NOTE
• Do not turn off the MAIN POWER switch or unplug the
AC cord while receiving the data, otherwise it will not be
captured properly.
• Updating the software may take some time.
Getting update information
Information
Picture / Audio test
When external equipment is connected with the
TV powered on and there is no audio/video output,
the TV may determine which equipment could
cause a problem between the TV and the external
equipment.
NOTE
• Terminals which can be tested:
HDMI, component, composite, SCART, DVI, D-sub
• External speakers cannot be tested. This function is
available for the TV speakers only.
Picture test
Audio test
Item
Perform a test for picture display.
When external equipment is connected
but the picture is not displayed, the
test will be performed.
Perform a test for audio playback.
When external equipment is connected
but the audio does not playback, the
test will be performed.
Information
Message list
When new software is detected, you can confirm the
update information and download the software from
“Message list”.
Go to “TV Menu” > “Setup” > “Information” >
“Message list”.
NOTE
• When the TV succeeds at downloading new software,
the message is updated in the “Message list” of the
“Information” menu.
• The software update will not be carried out if there is no
new software available at the specified download time.
80
Appendix
Information
Receiver report
Display reports regarding failures and changes for
timer settings.
Go to “TV Menu” > “Setup” > “Information” >
“Receiver report”.
Information
Identification
You can check the TV ID on the screen for reporting
to customer service.
Go to “TV Menu” > “Setup” > “Information” >
“Identification”.
Information on the software licence
for this product
Information
Software licence
Updating your TV via USB/network
Information
Software update
This function allows you to update to the latest
software via a USB device or network.
• To check the availability of the latest software versions,
visit http://www.sharp.eu/software-download/ for links
to the download pages for the appropriate countries.
1 Go to “TV Menu” > “Setup” > “Information” >
“Software update” > “USB update”.
• You can also update the software through the
network. Go to “TV Menu” > “Setup” >
“Information” > “Software update” > “Network
update” and follow the on-screen instruction.
• A broadband connection and Network setup are
required to update the software using the internet
(Pages 64–65).
2 Press ; and then insert the USB device
containing the software update file.
CAUTION
• If the data is not compatible with the system, an error
message appears on the screen. Repeat steps 2 and 3
after pressing ;.
• When an error message displays, check to see if:
• The USB device is inserted firmly.
• The USB memory has two or more software update
files.
• No data for updating the system exists in the USB
memory.
• The software update file is broken.
• The software update file is not compatible with your
TV’s software.
• The current system is same as the system update
data.
• The USB memory is not formatted by FAT32.
5 The TV displays the software version information
after checking the data.
6 Press c/d to select “Yes” to update the
system, and then press ;.
7 The TV restarts automatically, and the software
update will be complete.
• This operation may take a while.
CAUTION
You can read the software licences in this menu.
Go to “TV Menu” > “Setup” > “Information” >
“Software licence”.
E Software composition
The software included in this product is comprised
of various software components whose individual
copyrights are held by SHARP or by third parties.
• The Net TV memory, which includes the lock code,
passwords, and cookies, may be cleared when the
software update is carried out.
CAUTION
• Be sure to insert the USB device correctly into the
terminal.
3 Press > to close the window when a screen
prompt pops up.
4 The TV displays a confirmation screen while
checking the data in the inserted USB device.
81
Appendix
Warning regarding basic use
• DivX®, DivX Certified®, DivX Plus® HD and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Cautions regarding use in high and low temperature environments
• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX videos.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
• When the TV is used in a low temperature space (e.g., room, office), the picture
may leave trails or appear slightly delayed. This is not a malfunction, and the TV will
recover when the temperature returns to normal.
• Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location
exposed to direct sunlight or near a heater, as this may cause the cabinet to deform
and the LCD panel to malfunction.
Storage temperature: f 20 °C to e 60 °C.
• YouTube and the YouTube logo are trademarks of Google Inc.
Devices connected to the protective earthing of the building installation through the
MAINS connection or through other devices with a connection to protective earthing
and to a television distribution system using coaxial cable, may in some circumstances
create a fire hazard. Connection to a television distribution system therefore has to be
provided through a device providing electrical isolation within a certain frequency range
(galvanic isolator, see EN 60728-11).
NOTE
• For requirements in Norway and Sweden, the requirements for isolation are also
relevant for devices that can be connected to television distribution systems.
Trademarks
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
• Manufactured under license from Dolby Laboratories.
• “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
• “x.v.Colour” and
are trademarks of Sony Corporation.
• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
• DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or
certification marks of the Digital Living Network Alliance.
• All other company or product names are trademarks or registered trademarks of their
respective companies.
• MHL, the MHL Logo, and Mobile High-Definition Link are trademark or registered
trademarks of MHL LLC in the United States and other countries.
• Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and
the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark
of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
• Full HD 3D Glasses™ logo and “Full HD 3D Glasses™” word are trademark of Full
HD 3D Glasses Initiative
• The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—
project.
• LC_ LCFONT+ and LC logo mark are registered trademarks of
SHARP Corporation. This product is embedded with LC Font technology, which was
developed by SHARP Corporation for clearly displaying easy-to-read characters on
an LCD screen. However, other non-LCD fonts are used for displaying some screen
pages.
82
Appendix
Software licences for Net TV
Disclaimers for services using the Internet
This product includes the Opera™
browser.
DISCLAIMERS
• This product contains fonts provided by Monotype Imaging Inc.
• Monotype® is a trademark of Monotype Imaging Inc. registered in the United States
Patent and Trademark Office and may be registered in certain jurisdictions.
• Tioga™ is a trademark of Monotype Imaging Inc. and may be registered in certain
jurisdictions.
• Letter Gothic™ is a trademark of The Monotype Corp. and may be registered in
certain jurisdictions.
• iType® is a trademark of Monotype Imaging Inc. registered in the United States
Patent and Trademark Office and may be registered in certain jurisdictions.
• This product contains the iType® font engine from Monotype Imaging Inc.
•
•
•
•
•
•
83
Appendix
Specifications
Item
Model:
LC-60LE855E/LC-60LE855K/
LC-60LE858E/LC-70LE858E/
LC-80LE858E
LCD panel
203 cm (80o) X-Gen panel
177 cm (70o) X-Gen panel
152 cm (60o) X-Gen panel
1,920 x 1,080 x 4 dots
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
CCIR (B/G, I, D/K, L/L’)
DVB-T (2K/8K OFDM),
DVB-T (2K/8K OFDM),
DVB-T2 (1K/2K/4K/8K/ DVB-S/S2
16K/32K OFDM), DVB-C DVB-T2 (1K/2K/4K/8K/
16K/32K OFDM), DVB-C
IR A ch_E69 ch (Digital), E2_E69 ch, F2_F10 ch,
I21_I69 ch, IR A_IR J ch
Hyper-band, S1_S41 ch
Resolution
Video colour system
TV
TVfunction standard
Receiving
channel
Analogue
Digital
VHF/UHF
CATV
Satellite
(857 series
only)
TV-tuning system
Stereo/Bilingual
Audio amplifier
Speaker
Terminals Antenna
VHF/UHF
Satellite
(857 series
only)
RS-232C
EXT 1
EXT 2
EXT 3
PC
—
Auto Preset 999 ch
(non-Nordic [DTV])
Auto Preset 9999 ch
(Nordic [DTV])
Auto Preset 99 ch (ATV),
Auto Label
Auto Sort
SD CARD (VIDEO
STORE)
OSD language
950_2150 MHz*1
Auto Preset 999 ch
(non-Nordic [DTV])
Auto Preset 9999 ch
(Nordic [DTV])
Auto Preset 99 ch (ATV),
Auto Label
Auto Sort
Auto Preset 9999 ch
A2/NICAM
10 W x 2/15 W x 1
(150 mm x 32 mm) x 2/Ø 80 mm x 1
75 q Din type (analogue & digital)
—
HDMI 1 (EXT 4)
HDMI 2 (EXT 5)
HDMI 3 (EXT 6)
HDMI 4 (EXT 7)
USB 1
USB 2 (HDD)
USB 3 (WIRELESS LAN)
ETHERNET (10/100)
HDMI 2/PC AUDIO (L/R)
DIGITAL AUDIO OUTPUT
C. I. (Common Interface)
OUTPUT/Headphones
Model:
LC-60LE857E/LC-60LE857RU/
LC-70LE857E/LC-70LE857RU/
LC-70LE857K/LC-80LE857E/
LC-80LE857RU/LC-80LE857K
75 q F type (DVB-S/S2)
D-sub 9 pin male connector
SCART (AV input, Y/C input, RGB input, TV output)
RCA pin (AV input/AUDIO L/R)
Component (AV input/Audio L/R)
mini D-sub 15 pin
Power requirement
Power consumption
Weight
Operating temperature
I
J
K
HDMI (ARC)
HDMI
HDMI
HDMI (MHL)
USB (DC 5 V, 500 mA)
USB (DC 5 V, 1000 mA)
USB (DC 5 V, 500 mA)
Network connector
Ø 3.5 mm jack*2
Optical S/PDIF digital audio output
EN50221, R206001, CI Plus specification
RCA pin (AUDIO L/R)/Ø 3.5 mm jack (audio
output)
SD card
Arabic, Chinese, Czech, Danish, Dutch, English,
Estonian, Finnish, French, German, Greek,
Hungarian, Italian, Latvian, Lithuanian, Norwegian,
Polish, Portuguese, Romanian, Russian, Slovak,
Slovene, Spanish, Swedish, Turkish, Ukrainian
AC 220_240 V, 50 Hz
80o : 290W (0.2W Standby*3)
70o : 235W (0.2W Standby*3)
60o : 180W (0.2W Standby*3)
80o : 62.0 kg (without stand)
67.5 kg (with stand)
70o : 43.0 kg (without stand)
49.5 kg (with stand)
60o : 33.0 kg (without stand)
40.0 kg (with stand)
0 °C to e 40 °C
The satellite channel’s frequency may vary according to satellites and antennas.
The HDMI 2 and PC terminals can both use the same audio input terminal.
Standby power consumption applies when the TV is set to not receive EPG data.
• As a part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
84
Appendix
Specifications (Wireless LAN USB adapter)
Product name
Standard
Host interface
Frequency band
Dual Band 802.11n USB2.0 adapter
IEEE 802.11a/b/g/n
USB2.0
2412_2484 MHz
5150_5850 MHz
Security
Static WEP (64/128 bit, key index 1 only)
WPA-PSK (TKIP)
WPA2-PSK (AES)
Modulation
DBPSK@1 Mbps
DQPSK@2 Mbps
CCK@5.5/11 Mbps
BPSK@6/9 Mbps
QPSK@12/18 Mbps
16-QAM@24 Mbps
64-QAM@48/54 Mbps and above, Rx up to 300
Mbps
Transmit Tx
2.4 GHz
11b 17 e/_ 1.5 dBm
power and output
11g 14 e/_ 1.5 dBm
sensitivity power:
11n 13 e/_ 1.5 dBm
(Typical) 5 GHz
11a 14 e/_ 1.5 dBm
(5150_5250 MHz, 11n 13 e/_ 1.5 dBm
5250_5350 MHz)
5 GHz
11a 13 e/_ 1.5 dBm
(5470_5725 MHz, 11n 13 e/_ 1.5 dBm
5725_5850 MHz)
Rx sensitivity: (Typical)
_84 dBm@11 Mbps
_72 dBm@54 Mbps
_64 dBm@64-QAM, 20 MHz channel spacing
_61 dBm@64-QAM, 40 MHz channel spacing
Current Consumption (DC 5V)
Tx: 2.2 W (Typical)
Rx: 1.4 W (Typical)
Weight
13 g
Dimensions
20.0 (W) g 73.3 (D) g 8.0 (H) mm
Operating temperature
0 °C to e 40 °C
NOTE
• This TV has received the following certifications when connected in an environment
using the supplied SHARP wireless LAN adapter.
− Wi-Fi CERTIFIED™ (certification programme from the Wi-Fi Alliance®)
− Wi-Fi Protected Setup™ (certification programme from the Wi-Fi Alliance®)
• When there is significant interference in the 2.4_GHz frequency (such as from other
wireless LAN devices, Bluetooth® devices, 2.4_GHz cordless telephones, and
microwave ovens), it is recommended that you use a wireless LAN access point that
supports IEEE802.11a/n (5 GHz) and set the access point to transmit at 5 GHz. For
setup details, see the operation manual of your access point.
• Before transferring to a third party or disposal, be sure to initialize the wireless LAN
settings.
• Wireless LAN USB adapter (WN8522D 7-JU) is Peripheral Device for TV and supports
WEP64, WEP128, TKIP and AES encryptions.
• Using a wireless LAN adapter other than the supplied SHARP wireless LAN adapter
may result in radio communications that do not comply with regulations on radio
communications. Therefore, do not use a wireless LAN adapter other than the supplied
SHARP wireless LAN adapter.
85
Appendix
Environmental specifications
Item
60o/70o/80o
I On-mode (W) (in home-mode)
J Energy-Save-Mode (W)
108 W/142 W/178 W
Advanced
K Standby-Mode (W)
L Off Mode (W)
I
J
K
L
M
78 W/98 W/125 W
0.2 W/0.2W/0.2W
MAIN POWER switch
M Annual Energy Consumption (kWh)
Annual Energy Consumption
M Energy-Save-Mode (kWh)
Mounting the TV on a wall
Advanced
0.01 W or less
158 kWh/207 kWh/
260 kWh
114 kWh/143 kWh/
183 kWh
Measured according to IEC 62087 Ed. 2
For further information about the Energy Save function, please see related pages in
this operation manual
Measured according to EN 62301 Ed. 1
Standby power consumption applies when the TV is set to not receive EPG data
Measured according to EN 62301 Ed. 1
Annual energy consumption is calculated according to EU Regulation (EU)
No 1062/2010 based on operating 4 hours per day for 365 days a year
LC-70LE857E/LC-70LE857RU/LC-70LE857K/LC-70LE858E/LC-60LE855E/
LC-60LE855K/LC-60LE857E/LC-60LE857RU/LC-60LE858E
• This TV should be mounted on a wall only with a SHARP wall mount bracket (Page 4).
The use of other wall mount brackets may result in an unstable installation and may
cause serious injuries.
• Mounting the LCD colour TV requires special skills and should only be performed
by qualified service personnel. Customers should not attempt to do the work
themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
• You can ask qualified service personnel about using an optional bracket to mount the
TV to a wall.
• When you mount the TV on a wall, you should attach the supporting post.
NOTE
• The power consumption of on-mode varies depending on the images the TV displays.
NOTE
• Detach the cable tie on the rear of the TV when using the optional mount bracket.
• Due to the terminal configuration on this TV, when you wall-mount this model, make
sure there is enough space between the wall and the TV for the cables.
• To use this TV mounted on a wall, remove the AC cord holder and the covers at the 4
locations on the rear of the TV, and then use the screws supplied with the wall mount
bracket to secure the bracket to the rear of the TV.
E Wall mount audio setup
When you mount the TV on a wall, you can adjust the sound to a more suitable
one by setting this function to “Yes”.
Go to “TV Menu” > “Setup” > “View setting” > “Wall mount audio setup”.
86
Appendix
NOTE
LC-80LE857E/LC-80LE857RU/LC-80LE857K/LC-80LE858E
The wall mount kit (sold separately) allows you to mount the TV on the wall. For
detailed information on installing the wall mount, see the instructions provided
with the product. We recommend you to contact qualified service peronnel when
installing it. SHARP is not responsible for any damage to the product or injury to
yourself or others if you choose to install the wall mount on your own.
CAUTION
• Install your wall mount on a solid wall perpendicular to the floor. When you want
to attach the wall mount to surfaces other than plaster board, please contact your
nearest retailer/adviser for additional information. If you install the TV on a ceiling
or slanted wall, it may fall and result in severe personal injury. Always have two
people mount the TV on a wall.
• Do not mount the TV at an angle.
• Due to the terminal configuration on this TV, when you wall-mount this model, make
sure there is enough space between the wall and the TV for the cables.
• To use this TV mounted on a wall, remove the cable tie as needed.
• Do not use screws that do not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard length. Screws that are too long
may cause damage to the inside of the TV set.
• Do not fasten the screws too firmly or loosely. This may damage the product or cause
the product to fall, leading to personal injury. SHARP is not liable for these kinds of
accidents.
• SHARP is not liable for product damage or personal injury when a non-VESA or nonspecified wall mount is used or the consumer fails to follow the product installation
instructions.
Wall mount kit specifications
Do not install the wall mount kit while your TV is turned on. It may
result in personal injury due to electric shock.
Standard dimensions for wall mount kits are shown below.
A
E Wall mount audio setup
When you mount the TV on a wall, you can adjust the sound to a more suitable
one by setting this function to “Yes”.
Go to “TV Menu” > “Setup” > “View setting” > “Wall mount audio setup”.
WALL
Max 75
WALL MOUNT KIT
200
Max 345
SCREW
600 A
WALL MOUNT UNIT
CABINET
Max 145
400 B
B
WALL MOUNT KIT
Max 375
Min 80
12
DEPTH OF
MOUNTING HOLES
MOUNTING HOLES
• VESA screw hole specs (A - B) in millimeters
• Standard screw
• Quantity
I
J
600 – 400
M8*2
4
Must be smaller than the shaded area.
Use 1.25 pitch screws.
87
Appendix
Abbreviation list
Rating table for child lock
Broadcasted rating
User-adjusted
rating
AGE
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Universal
viewing
✔
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Parental
approval pref.
✔
✔
✔
✔
✔
—
—
—
—
—
—
—
—
—
—
X-rated
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Broadcasted rating
User-adjusted
rating
Universal viewing
Parental approval
pref.
X-rated
Universal
viewing
—
—
—
Parental
approval pref.
✔
—
—
X-rated
✔
✔
—
Abbreviated term
ARC
ATV
CEC
DivX®
:
DTV
DVB-C
DVB-S
DVB-S2
DVB-T
DVB-T2
DVI
EPG
HbbTV
HDCP
HDMI
LAN
MHEG
MHL
MHP
OSD
PCM
SAT
USB
WPS
88
Stands for
Audio Return Channel
Analogue TV
Consumer Electronics Control
Digital Video Xtreme®
Digital Noise Reduction
Digital TV
Digital Video Broadcasting-Cable
Digital Video Broadcasting-Satellite
Digital Video Broadcasting-Satellite-Second Generation
Digital Video Broadcasting-Terrestrial
Digital Video Broadcasting-Terrestrial Version 2
Digital Visual Interface
Electronic Programme Guide
Hybrit Broadcast Broadband TV
High-bandwidth Digital Content Protection
High-Definition Multimedia Interface
Local Area Network
Multimedia and Hypermedia Expert Group
Mobile High-Definition Link
Multimedia Home Platform
On Screen Display
Pulse Code Modulation
Satellite
Universal Serial Bus
Wi-Fi® Protected Setup
Appendix
Dimensional drawings
(28)*2
(1539)*1
(640)
(385)
(400)
(400)
(251)
(400)
(200)
(200)
(400)
(176)
(513)
(932)
(971)
(451)
(748)*1
(178)
(385)
(640)
(58)
(1578)
(178)
(810)
(28)*2
(58)
(1378)
(1329)*1
(848)
LC-70LE857E
LC-70LE857RU
LC-70LE857K
LC-70LE858E
(866)*1
LC-60LE855E
LC-60LE855K
LC-60LE857E
LC-60LE857RU
LC-60LE858E
(621)
(575)
I
J
Active area
Thinnest part (except of terminal height)
NOTE
• Dimensions do not include protrusions such as screws and some parts.
89
Appendix
LC-80LE857E
LC-80LE857RU
LC-80LE857K
LC-80LE858E
(34)*2
(1825)
(59)
(207)
(580)
(996)*1
(1066)
(1103)
(1771)*1
(820)
(443)
(200)
(261)
(400)
(600)
(441)
I
J
Active area
Thinnest part (except of terminal height)
NOTE
• Dimensions do not include protrusions such as screws and some parts.
90
Appendix
EU Energy Label for Televisions
On 30 November, 2010 the European Commission adopted the Commission
Delegated Regulation (EU) No 1062/2010 with regard to energy labelling of
televisions.
2
1
3
The Regulation entered into force on 20 December 2010 and applies in all
Member States.
Manufacturers and dealers are required to display the label shown below, on their
televisions from 30 November 2011.
4
The label provides information to assist consumers in evaluating televisions for
energy efficiency and energy consumption and to make a purchasing decision
that contributes to the protection of the environment and to a lower carbon
society.
The figure below shows the label design and explains the information included.
For further information please visit the Sharp internet homepage (http://www.
sharp.eu).
7
5
6
XYZ
The retailer or online shop where you purchased your television from would have
displayed the label and its corresponding rating. If in doubt please consult them.
8
In addition to saving energy many Sharp LCD televisions also carry the EU
Ecolabel, a voluntary environmental label that is awarded to goods which meet
the environmental requirements of the EU ecolabelling scheme (for details see
http://ec.europa.eu/environment/ecolabel/). This voluntary label enhances further
the environmental credentials of our televisions.
XYZ
XYZ
XYZ
9
NOTE
• Methods for calculating the Energy Efficiency Index and the annual on-mode energy
consumption are set out in Annex II of Regulation (EU) No 1062/2010. The determination
of the on-mode consumption is based on the international standard IEC 62087 Ed. 2
June 2011
91
13P02-PL-NG