eBridge1CR and eBridge1CT eBridge1CRT -

IP over Coax Kit

Rev. DSeBridge1CRT_04042013

Overview

The eBridge1CRT - IP over Coax transceiver and receiver kit is designed to enable fast

10/100Base-T Ethernet digital communication over coax cable. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition data transmission is extended to 2,000’ (over five times the 100m/328’

Ethernet maximum length), eliminating the need for repeaters. eBridge units will transmit

Composite Video Signal with Ethernet data simultaneously.

Input:

Specifications

Electrical (cont’d):

• 12VDC to 24VDC Class 2 power supply (polarity not

observed) or 16VAC to 24VAC Class 2 plug-in

transformer.

Power Consumption:

• 12VDC/275mA, 24VDC/110mA,

16VAC/375mA, 24VAC/200mA.

Compliant:

• Incorporates *sloc TM (Security Link over Coax)

technology.

Ethernet:

• Connectivity: RJ45, auto-crossover.

• Wire type: 4-pair Cat-5 or higher structured cable.

• Distance: up to 328 ft. (100m).

• Speed: 10/100BaseT, half/full duplex, auto negotiation.

• Throughput is rated to pass 25mbps of data at

distances up to 1500 ft. With proper headend

equipment, multiple Megapixel cameras can be used.

Coax:

• Distance: up to 1,500 ft.

• Connectivity: BNC, RG-59/U or similar.

LED Indicators:

• Blue LED - Coax link connection.

• Yellow and Green LED (RJ45) IP Link status,

10/100Base-T/active.

• Green LED - Power.

Environmental:

• Operating Temperature:

14ºF to 122ºF (--- 10ºC to +50ºC).

• Storage Temperature:

-- 22º to 158ºF (--- 30º to +70ºC) Storage.

• Humidity: 20 to 85%, non-condensing.

• BTU/Hr.:

- VAC: 2.46 - 3.07 BTU/Hr.

Accessories:

• Composite video cables (included) - enables

simultaneous composite video signal over the

same Coax.

• Two (2) power connectors.

Applications:

• Retrofit digital IP cameras in an analog CCTV

installation.

• Works with Megapixel, HD720, HD1080 and VGA

(SD) cameras.

• Extend Network link distance in an industrial

environment.

• Upgrade deployed CCTV Coax to a digital network

for Retail, Casinos, Airports, Schools, Hospitals, etc.

• Enables simultaneous transmission of composite and

digital IP video.

Mechanical:

• Lightweight molded fiberglass reinforced polyester

enclosure is corrosion resistant and does not contain

halogens.

• Dimensions (W x L x H approx.):

2.5” (63.5mm) x 3.8” (96.52mm) x 1” (25.4mm)

• Product weight (approx.): 4 oz. (0.11 kg).

• Shipping weight (approx.): 7 oz. (0.17 kg).

Additional eBridge models:

• eBridge1CR: Single port ethernet receiver

(use with eBridge transceiver).

• eBridge1CT: Single port ethernet transceiver

(use with eBridge receivers).

Electrical:

• BTU/Hr.:

- VDC: 1.69 - 4.46 BTU/Hr.

• eBridge1CRT: Single port ethernet receiver and

transceiver kit.

• eBridge4CR: Four (4) port ethernet receiver.

• eBridge16CR: Sixteen (16) port ethernet receiver.

* sloc is a registered trademark of Intersil Corporation.

Agency Approvals

UL/CUL Listed for Information

Technology Equipment (UL 60950-1).

European Conformity

C-Tick Approved - Z1409

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com