Qsan Technology P210V40 disk array Datasheet

P210V40 iSCSI-SAS

2U8 Storage Systems

Qsan’s storage systems are designed for high availability, non-stop services, applications demanding high throughput, and flexible storage planning with cost effectiveness for small and medium businesses.

Highlights

1. Four iSCSI ports

2. Up to 120K IOPS & 600MB/Sec. throughput

3. Hardware iSCSI offloaded engine

4. Green storage designs: auto disk spin down, advanced cooling mechanism, & 80 PLUS energy-efficient power supplies

5. Advanced data protection: RAID 6,

60, QSnap writeable snapshot,

Windows VSS support

6. Flexible volume management for multiple applications & environments: virtualization

(VMWare, Hyper-V, Citrix), cloud storage, SQL, Exchange, surveillance, file backup, email, boot from SAN, & etc.

7. High connection availability: load balancing & failover

8. Extendable capacity up to 160TB

Outstanding Performance

P210V40 IOPS is 120,000 at maximum, much higher than other storage systems within the same segment in the current market; besides, its throughput is 600MB/Sec. at maximum.

Applications

The optimized IOPS and throughput are capable of providing run-time critical online services, such as Cloud storage, SQL, Exchange, and high-end surveillance storages. Furthermore, with the iSCSI interface,

P210V40 is ideal for virtualization environments - VMWare, Hyper-V, and

Citrix. Users can install up to 32 OSes in the iSCSI system through the

Boot-from-SAN feature. With this feature, the multiple OSes/Servers can be managed easily and well protected by Qsan’s advanced data protection features.

Green

All P210V40 systems are equipped with Qsan’s default green features for power saving. In most cases, the hard drives consume most power.

With the auto disk spin down feature and proper configuration, the power consumption of hard drives can be reduced to a minimum, and users will not even notice this feature. P210V40 monitors the environment temperature for cooling mechanism and the fan modules respond accordingly. The power supply modules are all 80 PLUS power efficient for better power converting rate. In virtue of the reduction of hard drive power consumption, the advanced cooling mechanism, and the energy-efficient power supplies, the unnecessary power cost is decreased greatly.

Ordering Information

Controller Configuration

P210V40 Single controller

Optional Components

BBM Battery backup module for cache

P210V40

Hardware Components

RAID Controller

No. of Host Channels

Expansion Enclosure

Cache Memory

No. of Hard Drives (SAS & SATA II)

Max. No. of Hard Drives

(SAS & SATA II)

Power Supply

Fan

Dimensions

Single controller

4 x iSCSI

J200 series

1GB, up to 2GB

8

80

2 x 300W

2

2U 19” Rackmount

431.0mm x 516.0mm x 87.5mm (W x D x H)

Feature Highlights

Green iSCSI

RAID & Volume

High Availability

Advanced Data Protection

Management

Notification

OS Support

Virtualization

Warranty

Auto disk spin down

Advanced cooling mechanism

80 PLUS energy-efficient power supplies

Hardware iSCSI off-load engine iSCSI jumbo frame

Header/Data digest

CHAP authentication

Up to 32 multiple nodes support

Up to 128 sessions

RAID level 0,1,0+1,3,5,6,10,30,50, 60, JBOD, N-way mirror

Up to 1024 logical volumes

One logic volume can be shared by as many as 16 hosts

Global and dedicated hot spare

Write-through or write-back cache policy

Online volume expansion

Instant RAID volume availability

Auto volume rebuilding

On-line volume migration without system down time

Multi-path & load-balancing support (Microsoft MPIO, MC/S, Trunking, LACP)

QSnap writable snapshot

Microsoft Windows Volume Shadow Copy Services (VSS)

Configurable N-way mirror

Online disk roaming

Instant volume configuration restoration

Battery backup module (BBM)

LCM; Serial console; SSH telnet; HTTP Web UI; Secured Web (HTTPS); iSNS; S.E.S.

Email; SNMP trap; Browser pop-up windows; Syslog; Windows Messenger

Windows; Linux; Solaris; Mac

VMWare; Hyper-V; Citrix

3-year warranty for system

1-year warranty for battery backup module

Requirements

AC Input

DC Output

Operating Temperature

Relative Humidity

100-240V ~ 6A-4A 1+1 300W with PFC (Auto Switching)

3.3V-15A; 5V-25A; 12V-18A

10 to 40°C

5% to 95% non-condensing

Copyright © 2004 - 2010 Qsan Technology, Inc. All Rights Reserved.

* Any information provided here is subject to change without prior notice.

* All other trademarks mentioned herein are the property of their respective companies.