- Computers & electronics
- Computer components
- System components
- Networking cards
- Cisco
- 15454-CE-MR-10=
- Data Sheet
Cisco 15454-CE-MR-10= Datasheet
Add to my manuals8 Pages
Cisco 15454-CE-MR-10: Your Gateway to Multirate Ethernet Services
The Cisco 15454-CE-MR-10 empowers you with a versatile 10-port multirate Ethernet card, enabling the seamless delivery of carrier-class Ethernet Private Line services. This advanced solution transforms your network, bridging the gap between traditional TDM services and the dynamic world of Ethernet.
With the 15454-CE-MR-10, you gain the flexibility to scale from 1.5 Mbps to 1 Gigabit Ethernet Private Line services. Its 10 Small Form-Factor Pluggable (SFP)-based multirate ports support a wide range of speeds, including 10 Mbps, 100 Mbps, and 1000 Mbps.
advertisement
Data Sheet
Cisco ONS 15454 CE-Series 10-Port Multirate Ethernet
Card
The 10-port multirate Ethernet card for the Cisco
®
ONS 15454 Multiservice Provisioning
Platform (MSPP) enables the delivery of true carrier-class Ethernet Private Line services.
Product Overview
Through its portfolio of Ethernet service cards, the Cisco ONS 15454 MSPP has enabled service providers and enterprises to effectively and efficiently expand their network capability from transporting only time-division multiplexing (TDM) services to delivering multiple services over a single, converged architecture and eliminating the need for multiple overlay infrastructures. With the introduction of the Cisco ONS 15454 CE-Series 10-Port Multirate Ethernet Card (CE-MR), the
Cisco CE-Series card portfolio – which includes the 10/100 Mbps (CE-100) and the 1000 Mbps
(CE-1000) cards on the Cisco ONS 15454 and 15310 platforms – gives service providers the ability to scale from 1.5-Mbps to 1-Gigabit Ethernet Private Line services. Additionally, the Cisco
CE-MR card provides the service flexibility for customers to deploy multirate Ethernet services
(10,100, 1000 Mbps) over a single card by supporting 10 Small Form-Factor Pluggable (SFP)based multirate ports.
The Cisco CE-MR (Figure 1) meets important requirements for an end-to-end Ethernet Private
Line application with features such as generic framing procedure (GFP), virtual concatenation
(VCAT), software link capacity adjustment scheme (LCAS and SW-LCAS), link integrity, and comprehensive Ethernet and SONET statistics – including bandwidth utilization statistics and flow control. The Cisco CE-MR, with GFP and VCAT, helps service providers and enterprises maximize bandwidth utilization and promote industry-wide interoperability for Ethernet Private Line services.
With LCAS, the Cisco CE-MR gives service providers the flexibility to dynamically add and remove bandwidth on Ethernet Private Line services. Ethernet and SONET statistics provide servicemonitoring capabilities. For example, bandwidth utilization statistics reveal the usage patterns of end customers – data that can be critical for operations personnel or for network and business planners. Features such as link integrity provide faster convergence capability to end customers’
Layer 2 networks connected through Ethernet private lines.
The Cisco ONS 15454 MSPP is the optical industry’s first metro optical transport platform. It combines supercharged SONET/SDH transport, integrated optical networking (ITU grid wavelengths and DWDM, for example), and unprecedented multiservice interfaces on demand
(such as TDM, Ethernet/IP, and storage) to deliver enormous economic benefits. The Cisco ONS
15454 provides the functions of multiple network elements in a single platform. As a critical component of a complete, end-to-end, advanced service architecture from Cisco, the Cisco ONS
15454 delivers a scalable optical transport mechanism and the intelligent Ethernet/IP support to cost-effectively deliver next-generation voice and data services.
Cisco continues its tradition of converged network services leadership with the introduction of the
CE-MR card to the Cisco CE-Series, enabling the efficient delivery of Ethernet Private Line services without a major overhaul or redesign of existing transport infrastructure.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 8
Figure 1. Cisco ONS 15454 CE-Series 10-Port Multirate Ethernet Card
Data Sheet
The Cisco CE-MR card includes the following features:
● Ten multirate SFP-based Ethernet ports
● Support for 10/1000/1000 Mbps SFP optics: 10/100/1000 Mbps BASE-T; 100 Mbps FX, LX,
BX; 1000 Mbps SX, LX, ZX
●
10-Gbps SONET/SDH transport bandwidth per card
● Each multirate Ethernet port mapped to SONET/SDH (POS) using GFP-F (ITU-T G.7041) or LAN Extension (LEX) High-Level Data Link Control (HDLC) encapsulation
●
Each POS can consist of high-order (HO) VCAT (SONET: STS-1-nv where n=1 to 21, STS-
3C-nv where n=1 to 7; SDH: VC-4-nv where n=1 to 7), (LO) VCAT (SONET: Vt1.5-nv where n=1 to 64; SDH: VC-3-nv where n=1 to 21, VC12 where n=1 to 63) or contiguous concatenation (CCAT) (SONET: STS-1, -3c, -6c, -9c, -12c, -24c, -48c; SDH: VC-4, -4-2c, -
4-3c, -4-4c, -4-8c, -4-16c) circuits
●
Dynamic capacity increment/decrement (LCAS or SW-LCAS) to VCAT circuits
● Sub-50-millisecond (ms) SONET/SDH protection/restoration of CCAT transport circuits
●
Transparent to Layer 2 bridging, switching, Ethernet MAC control protocols (Cisco
EtherChannel® technology, 802.1x, Cisco Discovery Protocol, VLAN Trunking Protocol
[VTP], Spanning Tree Protocol), and VLAN (802.1Q and QinQ)
● Ethernet link functions: autonegotiation, link speed auto sense, full/half duplex, flow control
(802.3x)
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 8
Data Sheet
●
QoS capabilities: Packet prioritization based upon IP type of service (ToS) or 802.1P
● Jumbo packet support: 9600 bytes
● A-to-Z provisioning (Cisco Transport Controller and Cisco Transport Manager), Transaction
Layer 1 (TL1) provisioning
●
Simple Network Management Protocol (SNMP) alarms and Remote Monitoring (RMON) performance monitoring
● Cisco Transport Controller/Cisco Transport Manager/TL1 management
●
Interoperation (over SONET/SDH) with Cisco G-Series and ML-Series cards
● Back-pressure flow control
● Terminal and facility loopback
●
Link integrity support
Applications
The Cisco CE-MR provides the flexibility to meet the demands of a wide variety of Ethernet Private
Line applications found within service provider and enterprise networks. Figures 2 and 3 outline a few of the applications that can be met using the Cisco CE-MR cards.
Reliable Enterprise Networking
When the Cisco ONS 15454 MSPP is equipped with the CE-MR card, enterprise users can build highly reliable multiservice networks to support data, voice, and video applications. Additionally, a network based on a Cisco ONS 15454 provides the flexibility to support traditional TDM-based services along with Ethernet services. The Cisco ONS 15454 provides transport scalability from
155 Mbps (OC-3/STM-1) up to 320 Gbps (32 10-Gbps wavelengths), positioning the enterprise network for future growth (Figure 2).
Figure 2. Reliable Enterprise Networking
Private Line Carrier Ethernet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 8
Data Sheet
A metropolitan network that supports a wide range of service capabilities allows service providers to offer a tariff mix to meet each customer’s needs. The Cisco ONS 15454 provides the foundation for building an advanced multiservice network over an extremely reliable SONET/SDH infrastructure (Figure 3). The Cisco ONS 15454 with CE-Series cards facilitates the delivery of data services such as transparent LAN services (TLS) or Internet access over a carrier-class optical infrastructure supporting traditional TDM services. The Cisco CE-MR card, with VCAT and
LCAS functions, helps service providers offer a wide variety of Ethernet service-level agreements
(SLAs). Virtual concatenation (VCAT) provides a more efficient use of the transport bandwidth for data user interfaces, and link capacity adjustment scheme (LCAS) provides an effective way for a service provider to change the allocated bandwidth to each customer. Additionally, provisioning an
Ethernet circuit over a network equipped with a Cisco CE-MR card is easily accomplished through the use of the Cisco ONS 15454’s embedded A-to-Z circuit provisioning wizard. The Cisco CE-MR card also supports TL1-based provisioning to simplify integration with many embedded service provider management systems.
Figure 3. Reliable Enterprise Network Using SDH/SONET Infrastructure
Product Specifications
Compact Design
●
Single-width card slot design for increased shelf flexibility and scalability
● Up to 12 Cisco CE-Series cards per shelf assembly
●
Up to 120 Ethernet ports (10/100/1000 Mbps) per shelf assembly
Data Architecture Options
● Point-to-point
●
Hub-and-spoke using multiple circuits
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 8
Data Sheet
Optical Transport Options
● Unidirectional-path switched ring (UPSR) and subnetwork connection protection (SNCP)
● 2-fiber and 4-fiber bidirectional line switched ring (BLSR) and multiplex section-shared protection ring (MS-SPR)
●
Automatic protection switching (APS) and subnetwork connection (SNC) (1+1 uni- or bidirectional)
● Path-protected mesh networking (PPMN)
●
Unprotected (0+1)
Table 1 outlines valid SONET and SDH circuit combinations for the Cisco CE-MR card according to service type. Table 2 lists various product specifications for the Cisco CE-MR card.
Table 1. SONET and SDH Circuit Combinations
1
2
3
Service Type
Line-rate 1000 Mbps
Sub-rate 1000 Mbps
Line-rate 100 Mbps
SONET Circuit Type
STS-1-21v
STS-3C-7v
STS-24C
STS-48c
STS-1-nv , n = 1 to 20
STS-3C-nv, n = 1 to 6
STS-1, -3c, -6c, -9c, -12c
STS-3c
STS-1-3v
STS-1-2v
4
5
6
Sub-rate 100 Mbps
Line-rate 10 Mbps
Sub-rate 10Mbps
STS-1
STS-1-1v
VT1.5-Xv (X = 1 to 64)
STS-1
VT1.5-Xv (X = 7)
VT1.5-Xv (X = 1 to 6)
SDH Circuit Type
VC4-7v
VC4-8C
VC-4-16c
VC3-21v
VC4-nv, n = 1 to 6
VC-4, -4-2c, -4-3c, -4-4c
VC3-nv, n = 1 to 20
VC4
VC3-2v
VC3-3v
VC12-50v
VC3
VC3-1v
VC12 (n = 1 to 49)
VC12 (n = 5)
VC12 (n = 1 to 4)
Table 2. Product Specifications
Attributes
Ports
Port speed
SFP types
Duplex
Flow control
Transport
Transport bandwidth per card*
Transport bandwidth allocation on
“virtual” POS (VCG) ports
Transport bandwidth adjustment
Ethernet-over-SONET encapsulation
QoS
Frame size
Description
10 SFP ports
10/100/1000 Mbps
10/100/1000 Mbps BASE-T; 100 Mbps FX, LX, BX; 1000 Mbps SX, LX, ZX
Full and autonegotiation
Supported
Up to 10 “Virtual” POS (VCG) ports supporting HO-VCAT and LO-VCAT
10 Gbps in Cisco ONS 15454 slots 5,6,12,13
2.5 Gbps in Cisco ONS 15454 slots (1–4, 14–17)
SONET: STS-1-nv (n = 1 to 21), STS-3C-nv (n = 1 to 7), vt1.5-nv (n = 1 to 64),
STS-1, -3c, -6c, -9c, -12c, -24c, -48c;
SDH: VC-4-nv (n = 1 to 7), VC3-nv (n = 1 to 21), vc12-nv (n = 1 to 63), VC-4, -4-2c,
-4-3c, -4-4c, -4-8c, -4-16v
LCAS and SW-LCAS (dynamic addition and removal of bandwidth)
ITU-T G.7041 GFP-F, Cisco LEX, and Cisco HDLC options
802.1p and IP TOS-based prioritization
64 to 9600 bytes
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 8
Data Sheet
Attributes
Link integrity
Service provisioning
Description
Yes
A-to-Z service provisioning on Cisco Transport Controller, TL1-based service provisioning
100W Maximum power
Operating temperature
Operating humidity
23 to 131°F (–5 to 55°C)
Noncondensing 5–95%
Dimensions (H x W x D) 12.65 x 0.72 x 9.99 in. (32.13 x 1.83 x 22.86 cm)
*Bandwidth usage restrictions when using LO-VCAT
Regulatory Compliance
EMC (Class A)
●
NEBS Bellcore GR-1089-CORE, Issue 3 (Level 3, Type 2, and Type 4)
● IC ICES-003 Issue 3, 1997
● FCC 47CFR15
●
ETSI 300-386-TC
● EN55022, EN55024
●
CISPR 22, CISPR 24
● VCCI V-3/2000.04
●
EN61000-6-1
● Resolution 237 (Brazil)
Product Safety
● NEBS Bellcore GR-1089-CORE, Issue 3 (Level 3, Type 2, and Type 4)
● IEC 60950-1/EN 60950-1, First Edition (CB report/certificate with all country deviations)
●
UL and cUL/CSA 60950-1, First Edition
Laser Safety
●
EN or IEC-60825-2
● IEC 60825-1 Amendment 2 (2001-01)
●
CSA60950-1 or IEC 60950-1/EN60950-1
● 21CFR1040 (Accession Letter and CDRH Report)
Environmental
● NEBS Bellcore GR-63-CORE, Level 3
● ETS 300 019-2-1 (Storage, Class 1.1)
●
ETS 300 019-2-2 (Transportation, Class 2.3)
● ETS 300 019-2-3 (Operational, Class 3.1E)
System Requirements
Table 3 outlines the Cisco ONS 15454 system requirements for operation of the Cisco CE-MR card.
Table 3. System Requirements
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 8
Data Sheet
System Parameter
Shelf assembly
Electrical Interface Assembly (EIA) panels or FMECs
Processor
Cross-connect
System software
Slot compatibility
SONET
SA-ANSI, SA-HD
Not required
TCC2 or TCC2P
XC-10G
XC-VXC-10G
Release 8.5 or later (SONET)
Slots 1 to 6, 12 to 17
SDH
SA-ETSI
Not required
TCC2 or TCC2P
XC-VXL-2.5
XC-VXL-10G
XC-VXC-10G
Release 8.5 or later (SDH)
Slots 1 to 6, 12 to 17
Ordering information
To place an order, visit the Cisco Ordering Home Page . Table 4 outlines the ordering information for the Cisco ONS 15454 CE-Series 10-Port Multirate Ethernet Card.
Table 4. Ordering Information
Product Description
Cisco CE-Series 10/100/1000-Mbps multirate Ethernet card, 10 ports, SONET system
Cisco CE-Series 10/100/1000-Mbps multirate Ethernet card, 10 ports, SDH system
SFP – 10/100/1000 Ethernet BASE-T multirate copper RJ-45
SFP – 10/100/1000 Ethernet BASE-T multirate copper RJ-45
SFP – 1000BASE-SX Gigabit Ethernet, 850 nm, MM, I-TEMP
SFP – 1000BASE-SX Gigabit Ethernet, 850 nm, MM, I-TEMP
SFP – 1000BASE-LX Gigabit Ethernet, 1310 nm, SM, I-TEMP
SFP – 1000BASE-LX Gigabit Ethernet, 1310 nm, SM, I-TEMP
SFP – 1000BASE-ZX Gigabit Ethernet, 1550 nm, SM, I-TEMP
SFP – 1000BASE-ZX Gigabit Ethernet, 1550 nm, SM, I-TEMP
SFP – 100 Mbps Short Reach – 1310 nm, MM, LC, I-TEMP
SFP – 100 Mbps Short Reach – 1310 nm, MM, LC, I-TEMP
SFP – 100 Mbps Long Reach – 1310 nm, SM, LC, I-TEMP
SFP – 100 Mbps Long Reach – 1310 nm, SM, LC, I-TEMP
SFP – 10/100 BX-U, EXT
SFP – 10/100 BX-U, EXT
SFP – 10/100 BX-D, EXT
SFP – 10/100 BX-D, EXT
Part Number
15454-CE-MR-10=
15454E-CE-MR-10=
ONS-SE-ZE-EL=
ONS-SE-ZE-EL
ONS-SI-GE-SX=
ONS-SI-GE-SX
ONS-SI-GE-LX=
ONS-SI-GE-LX
ONS-SI-GE-ZX=
ONS-SI-GE-ZX
ONS-SI-100-FX=
ONS-SI-100-FX
ONS-SI-100-LX10=
ONS-SI-100-LX10
ONS-SE-100-BX10U=
ONS-SE-100-BX10U
ONS-SE-100-BX10D=
ONS-SE-100-BX10D
Service and Support
Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, see Cisco Technical Support Services or Cisco Advanced Services .
For More Information
For more information about the Cisco ONS 15454 MSPP, visit http://cisco.com/en/US/products/hw/optical/ps2006/ps2010/index.html
or contact your local account representative.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 8
Data Sheet
Printed in USA
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C78-425619-00 08/07
Page 8 of 8
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project