PRO
SOUND
Loudspeakers and Electronics
A
At Electro-Voice, we Live for Sound. For
more than 85 years, we have designed and
engineered leading-edge sound reinforcement
solutions that empower the performer, exceed
the expectations of the audio professional and
elevate the audience experience.
CONTENTS
X-Line4
XLC6
XLCi7
XLVC8
Xi Series
10
EVF Front-Loaded Systems
12
EVF Front-Loaded Subwoofers
16
EVH Horn-Loaded Systems
18
EVA Expandable Vertical Array
20
EVA Subwoofers
21
EVU Ultracompact Systems
22
EVI Variable Intensity Loudspeakers Systems
24
EVID Surface-Mount Systems
26
EVID In-Wall Speaker Systems
27
EVID Ceiling Speaker Systems
28
Specialty Loudspeakers
30
Monitors31
ZX/ZXA32
EVM12L Guitar Speakers
35
SX36
QRx38
Tour X
40
ETX Powered Loudspeakers
42
Live X
44
ZLX46
Rigging and Accessories
48
Tour Grade Amplifiers
54
Q Series Amplifiers
56
CPS Contractor Precision Series Amplifiers
58
CP Compact Precision Amplifiers
61
PA Series Commercial Power Amplifiers
62
Netmax64
Sound System Processors
2
66
3
CONCERT
CONCERT
INSTALL
Xvls
The two full-range boxes in the line are three-way
systems that incorporate the Electro-Voice Hydra timesynchronized, high-frequency plane wave generator to
provide excellent summing in the far field. They also employ
Ring-Mode Decoupling (RMD) to provide level-independent
fidelity, greater mid-bass clarity and high-frequency
accuracy. All models in the line share the same footprint and
are connected by proprietary rigging that facilitates rapid
venue load-in and load-out.
INSTALL
LOUDSPEAKERS
X-Line is a concert sound loudspeaker system that
combines high-level sonic impact and vocal intelligibility
with the uniform, predictable coverage that only a line
array can deliver. The X-Line system provides wide
horizontal dispersion from a single vertical line array with
exceptionally coherent wave-front summation in the
vertical plane. Extended low-frequency polar control
produces more uniform power response, further enhancing
overall intelligibility.
LOUDSPEAKERS
X-Line
THREE-WAY LONG-THROW ELEMENT
Xvlt
THREE-WAY MEDIUM-THROW ELEMENT
•
•
•
•
•
High-output, three-way line array system
Five-degree trapezoidal cabinet design for lower "J" section of linear array
120° coverage typical for medium-throw assignment
EV Hydra time-synchronized vertical plane-wave generator provides excellent far-field summing
Ring-Mode Decoupling (RMD) provides level-independent fidelity,
greater mid-bass clarity and high-frequency accuracy
• Proprietary rigging allows for rapid venue load-in and load-out
Xsub(F)
DUAL 18" SUBWOOFER ELEMENT
•
•
•
•
4
High-output, line array subwoofer system
Rectangular cabinet with footprint identical to other X-Line systems
Can be flown or ground-stacked. Also available in non-flying version
Proprietary rigging allows for rapid venue load-in and load-out
PORTABLE PA
High-output, three-way line array system
Rectangular cabinet design
90° horizontal coverage pattern ideal for long-throw applications
EV Hydra time-synchronized vertical plane-wave generator provides excellent far-field summing
Ring-Mode Decoupling (RMD) provides level-independent fidelity,
greater mid-bass clarity and high-frequency accuracy
• Proprietary rigging allows for rapid venue load-in and load-out
PORTABLE PA
•
•
•
•
•
Xvls
Xvlt
Xsub(F)
Frequency Response (-3 dB)
50 Hz – 16 kHz
50 Hz – 16 kHz
40–400 Hz
Frequency Range (-10 dB)
30 Hz – 17 kHz
30 Hz – 17 kHz
35–500 Hz
Horizontal Coverage
90°
120°
Vertical Coverage*
5°
8°
LF Power Handling1
1200 W continuous, 4800 W peak
1200 W continuous, 4800 W peak
MB Power Handling
600 W continuous, 2400 W peak
600 W continuous, 2400 W peak
HF Power Handling3
225 W continuous, 900 W peak
225 W continuous, 900 W peak
Sensitivity* LF/MB/HF
98/108/114 dB
97/107/114 dB
104 dB (half space)
Max. SPL* (calc., peak), LF/MB/HF
134/142/144 dB
133/141/144 dB
141 dB (half space)
Peak SPL @ 10m**
135 dB
135 dB
132 dB (half space)
Two 18" EVX-180B
2
1200 W continuous, 4800 W peak4
LF Transducer
Two 15" EVX-155PL
Two 15" EVX-155PL
MB Transducer
Two 8" ND08
Two 8" ND08
HF Transducer
Three 3" ND6-16
Three 3" ND6-16
Connectors
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
Enclosure Material
Birch plywood, textured epoxy paint
Birch plywood, textured epoxy paint
Birch plywood, textured epoxy paint
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Environmental Specs
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
Dimensions (H (front/rear) x W x D)*
19.46"/19.46" x 49" x 29.15"
(494.3/494.3 x 1244.6 x 740.4 mm)
19.46"/16.92" x 49" x 29.15"
(494.3/429.7 x 1244.6 x 740.4 mm)
19.46"/19.46" x 49" x 29.15"
(494.3/494.3 x 1244.6 x 740.4 mm)
Net Weight*
257 lb (117 kg)
253 lb (115 kg)
202 lb (92 kg)
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
1
50-200 Hz
2
300-2000 Hz
3
1200-8000 Hz
4
50-100 Hz
5
INSTALL
•
•
•
•
•
•
PORTABLE PA
XLC215
Accurate vertical control and coverage
Compact, lightweight modules
True three-way design
Triamp operation; biamp operation with optional mid-high crossover (XLC127DVX only)
Quik-Rig fast and simple integrated rigging
Supported by LAPS II array design/prediction software
HIGH-OUTPUT DUAL 15" SUBWOOFER LINE ARRAY ELEMENT
•
•
•
•
•
XLCi215
Accurate vertical control and coverage
Compact, lightweight modules
True three-way design
Triamp operation; biamp operation with optional mid-high crossover (XLCi127DVX only)
Fixed installation rigging
Supported by LAPS II array design/prediction software
HIGH-OUTPUT DUAL 15" SUBWOOFER ELEMENT
•
•
•
•
Footprint identical to other XLCi models
Two DVX3150A transducers
Compact and lightweight
Fixed installation rigging
See page 47 for XLCi Rigging and Accessories.
XLC127DVX
XLC907DVX
XLC215
XLCi127DVX
XLCi907DVX
XLCi215
Frequency Response (-3 dB)
65 Hz – 16 kHz
65 Hz – 16 kHz
40–400 Hz
Frequency Response (-3 dB)
65 Hz – 16 kHz
65 Hz – 16 kHz
40–400 Hz
Frequency Range (-10 dB)
54 Hz – 17 kHz
54 Hz – 17 kHz
30–400 Hz
Frequency Range (-10 dB)
54 Hz – 17 kHz
54 Hz – 17 kHz
30–400 Hz
Horizontal Coverage
120°
90°
Horizontal Coverage
120°
90°
300°
LF Power Handling1
500 W continuous, 2000 W peak
500 W continuous, 2000 W peak
LF Power Handling1
500 W continuous, 2000 W peak
500 W continuous, 2000 W peak
1000 W continuous, 4000 W peak4
1000 W continuous, 4000 W peak4
MB Power Handling2
300 W continuous, 1200 W peak
300 W continuous, 1200 W peak
MB Power Handling2
300 W continuous, 1200 W peak
300 W continuous, 1200 W peak
HF Power Handling3
150 W continuous, 600 W peak
150 W continuous, 600 W peak
HF Power Handling3
150 W continuous, 600 W peak
150 W continuous, 600 W peak
Sensitivity* LF/MB/HF
95/101/111 dB
95/101/112 dB
102 dB
Sensitivity* LF/MB/HF
95/101/111 dB
95/101/112 dB
102 dB
Max. SPL* (calc., peak), LF/MB/HF
128/132/139 dB
128/132/140 dB
138 dB
Max. SPL* (calc., peak), LF/MB/HF
128/132/139 dB
128/132/140 dB
138 dB
Peak SPL @ 10m**
130 dB
130 dB
124 dB
Peak SPL @ 10m**
130 dB
130 dB
124 dB
LF Transducer
12" DVX3121A
12" DVX3121A
Two 15" DVX3150A
LF Transducer
12" DVX3121A
12" DVX3121A
Two 15" DVX3150A
MB Transducer
Two 6.5" DVN2065
Two 6.5" DVN2065
MB Transducer
Two 6.5" DVN2065
Two 6.5" DVN2065
HF Transducer
Two 3" ND6-16
Two 3" ND6-16
HF Transducer
Two 3" ND6-16
Two 3" ND6-16
Connectors
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
Connectors
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
Enclosure Material
EVCoat–coated birch plywood
EVCoat–coated birch plywood
EVCoat–coated birch plywood
Enclosure Material
EVCoat–coated birch plywood
EVCoat–coated birch plywood
EVCoat–coated birch plywood
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Environmental Specs
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
Environmental Specs
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
Dimensions (H x W x D)*
14.25" x 39" x 22.5" (362 x 991 x 572 mm)
14.25" x 39" x 22.5" (362 x 991 x 572 mm)
21.5" x 39" x 22.5" (546 x 991 x 572 mm)
Dimensions (H x W x D)*
14.25" x 36.5" x 22.5" (362 x 927 x 572 mm)
14.25" x 36.5" x 22.5" (362 x 927 x 572 mm)
21.5" x 36.5" x 22.5" (546 x 927 x 572 mm)
Net Weight*
111 lb (50.4 kg)
111 lb (50.4 kg)
129 lb (58.5 kg)
Net Weight*
105 lb (48.1 kg)
105 lb (48.1 kg)
124 lb (56.3 kg)
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
1
100-500 Hz
2
500-2000 Hz
3
1600-8000 Hz
4
60-100 Hz
LOUDSPEAKERS
120° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
90° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
•
•
•
•
•
•
138 dB SPL
Footprint identical to XLC127DVX
Optional adapter grid for use with XLD281 and XLD291
Two DVX3150A transducers
Quik-Rig fast and simple integrated rigging
See page 46–47 for XLC Rigging and Accessories.
6
XLCi127DVX
XLCi907DVX
CONCERT
120° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
90° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
to that of the corresponding model in the XLC line. XLCi
loudspeakers are supported by LAPS II array design/
prediction software.
INSTALL
CONCERT
XLC127DVX
XLC907DVX
XLCi is a version of the XLC line that has been adapted for
permanent installations. XLCi features visually appealing
rigging that won't distract from architectural aesthetics. The
performance of the three modules in the line is identical
PORTABLE PA
LOUDSPEAKERS
one of the most popular line array systems in the world. All
modules incorporate Quik-Rig hardware for fast set-up and
tear-down.
Whether at a medium-sized festival, in a large concert hall
or house of worship, or as a supplementary system used
with X-Line, XLC compact line arrays have a proven record
of performance and reliability. It's no wonder that XLC is
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
1
100-500 Hz
2
500-2000 Hz
3
1600-8000 Hz
4
60-100 Hz
7
INSTALL
PORTABLE PA
XLD291
Full-bandwidth, three-way element
CCT maintains 90° horizontal coverage to 250 Hz
Versatile subwoofer integration
Biamp or triamp operation
Neodymium transducers
Simple, quick, integrated rigging
Supported by LAPS II array design/prediction software
120° HORIZONTAL TWO-WAY SINGLE 8" LINE ARRAY ELEMENT
90° HORIZONTAL TWO-WAY SINGLE 8" LINE ARRAY ELEMENT
•
•
•
•
•
•
XCS312
Full-bandwidth, three-way element (60 Hz – 20 kHz)
CCT (Coverage Control Technology)
Versatile subwoofer integration
Biamp or triamp operation
Neodymium transducers
Simple, quick, integrated rigging
Supported by LAPS II array design/prediction software
90° HORIZONTAL THREE-WAY DUAL 8" LINE ARRAY ELEMENT
•
•
•
•
•
•
•
XLE181
XLE191
Full-bandwidth, two-way element
Most compact, very lightweight
Biamp or full-range operation
Neodymium transducers
Simple, quick, integrated rigging
Supported by LAPS II array design/prediction software
XLD281
XLD291
XLE181
XLE191
XCS312
Frequency Response (-3 dB)
65 Hz – 16 kHz
65 Hz – 16.2 kHz
65 Hz – 16 kHz
65 Hz – 16.2 kHz
45–100 Hz
Frequency Range (-10 dB)
56 Hz – 16.5 kHz
56 Hz – 16.7 kHz
56 Hz – 16.5 kHz
56 Hz – 16.7 kHz
40–100 Hz
Horizontal Coverage
120°
90°
120°
90°
200°
LF1 Power Handling1
200 W continuous, 800 W peak 200 W continuous, 800 W peak 200 W continuous, 800 W peak 200 W continuous, 800 W peak 1000 W continuous, 4000 W peak4
LF2 Power Handling2
200 W continuous, 800 W peak 200 W continuous, 800 W peak
HF Power Handling3
80 W continuous, 320 W peak
80 W continuous, 320 W peak
80 W continuous, 320 W peak
80 W continuous, 320 W peak
Sensitivity* LF-MB/HF
99/112 dB
500 W continuous, 2000 W peak4
99/113 dB
99/112 dB
99/113 dB
100 dB (half space)
Max. SPL* (calc., peak), LF-MB/HF 128/137 dB
128/138 dB
128/137 dB
128/138 dB
136 dB (half space)
Peak SPL @ 10m**
129 dB
130 dB
129 dB
130 dB
121 dB
LF Transducer
8" DVN2080
8" DVN2080
8" DVN2080
8" DVN2080
Three 12" DVX3120A
LF-MB Transducer
8" DVN2080
8" DVN2080
TRIPLE 12" CARDIOID BASS ELEMENT
HF Transducer
Two 2" ND2S
Two 2" ND2S
Two 2" ND2S
Two 2" ND2S
Connectors
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
2 Neutrik NL8
• Versatile integration in main arrays
• Self-contained rigging hardware
• Supported by LAPS II array design/prediction software
Enclosure Material
EVCoat–coated birch plywood
EVCoat–coated birch plywood
EVCoat–coated birch plywood
EVCoat–coated birch plywood
EVCoat–coated birch plywood
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Powder-coated steel
Powder-coated steel
Environmental Specs
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
Dimensions (H x W x D)
9.9" x 28.58" x 14.52"
(251 x 726 x 369 mm)
9.9" x 28.58" x 14.52"
(251 x 726 x 369 mm)
9.9" x 20.3" x 14.52"
(251 x 516 x 369 mm)
9.9" x 20.3" x 14.52"
(251 x 516 x 369 mm)
20" x 28.58" x 26.65"
(508 x 726 x 677 mm)
Net Weight
48 lb (21.8 kg)
48 lb (21.8 kg)
38 lb (17.24 kg)
38 lb (17.24 kg)
148 lb (67.13 kg)
See page 46–47 for XLVC Rigging and Accessories.
8
CONCERT
120° HORIZONTAL THREE-WAY DUAL 8" LINE ARRAY ELEMENT
•
•
•
•
•
•
•
INSTALL
CONCERT
XLD281
configure and suspend. All cabinets feature simple, quick,
integrated rigging. System design is easy using ElectroVoice's free LAPS II array design/prediction software.
PORTABLE PA
LOUDSPEAKERS
When a line array with limited size and weight is required,
XLVC is the choice of professionals around the world. XLVC
Very Compact Line Arrays combine reliability, intelligibility
and acoustic performance in a package that is easy to
LOUDSPEAKERS
XLVC
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
1
750-1750 Hz
2
100-750 Hz
3
1500-6500 Hz
4
60-100 Hz
9
INSTALL
PORTABLE PA
Ultra-compact, low profile
Wide-range reproduction, maximized intelligibility
Optimal under-balcony enclosure angles
Suited for front-of-stage and near-field use
Trapezoidal enclosure, vented for extended LF
1.25" DH3/2010A titanium-diaphragm HF driver
•
•
•
•
•
Two 3/8" mounting bracket inserts
Compatible with OmniMount Series 100
EVCoat finish
Available in black or white
Mounting bracket available separately
12" TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
Xi-1152A/64F
Xi-1152A/94F
CONCERT
8" TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
Xi-1122A/85F
INSTALL
CONCERT
Xi-1082
Xi-1082, which contains a passive crossover network.
Xi loudspeaker cabinets are made of 18 mm, 13-ply
birch plywood finished in a black EVCoat and protected
by a full-face, steel front grille that is backed with foam.
All systems except the Xi-1082 have integrated handles
and two L-tracks on the top and bottom. A detailed flying
manual is available.
PORTABLE PA
LOUDSPEAKERS
The Electro-Voice Xi Series offers a potent combination
of high output and ultra-linear performance in two-way
systems. Xi Series loudspeakers incorporate the acoustic
advantages of Ring-Mode Decoupling (RMD) and
feature HP Constant Directivity waveguides to secure
excellent directivity control and even coverage. To achieve
sound performance without compromise, the Xi Series is
designed for active operation, with the exception of the
LOUDSPEAKERS
Xi Series
Ultra-compact, high output
Professional touring or installation
Maximum intelligibility for voice
3" ND6-16 neodymium HF driver
Trapezoidal (15°/side) 13-ply birch enclosure
•
•
•
•
Built-in L-Track rigging
35 mm stand mount
Integrated handles
Available in black or white
15" TWO-WAY FULL-RANGE LOUDSPEAKERS
• High-SPL in limited-space applications
• Maximum intelligibility for voice
• EVX155 woofer with 4" voice coil and
Ring-Mode Decoupling (RMD)
• 3" ND6-16 neodymium HF driver
• Rotatable 60° x 40° (64F) or 90°
x 40° (94F) coverage
•
•
•
•
•
•
Solid bass down to 50 Hz (-3 dB)
Trapezoidal (15°/side) 13-ply birch enclosure
Built-in L-Track rigging
35 mm stand mount
Integrated handles
Available in black or white
Xi-1082
Xi-1122A/85F
Xi-1152A/64F
Xi-1152A/94F
Frequency Response (-3 dB)
50 Hz – 20 kHz (-10 dB)
58 Hz – 17 kHz
50 Hz – 16 kHz
50 Hz – 16 kHz
Recommended High-Pass Frequency
60–80 Hz (12 dB/octave)
Dx46 preset
Dx46 preset
Dx46 preset
Axial Sensitivity (SPL, 1 W @ 1 m)
90 dB (LF/HF)
99/110 dB (LF/HF)
98/113 dB (LF/HF)
98/112 dB (LF/HF)
Max. SPL @ 1 m (calc.), full space
118 dB (LF/HF)
130/135 dB (LF/HF)
132/138 dB (LF/HF)
132/137 dB (LF/HF)
Long-Term Power Handling
175 W (LF/HF)
300/75 W (LF/HF)
600/75 W (LF/HF)
600/75 W (LF/HF)
Short-Term Power Handling (peak)
700 W (LF/HF)
1200/300 W (LF/HF)
2400/300 W (LF/HF)
2400/300 W (LF/HF)
Coverage (nominal -6 dB) H° x V°
90° x 40° (Const. Dir. waveguide)
80° x 55° (Const. Dir. waveguide)
60° x 40° (Const. Dir. waveguide)
90° x 40° (Const. Dir. waveguide)
Directivity Index
11.2 dB (+1.8/-2.7 dB)
2–20 kHz
10.9 dB (+1.2/-2.9 dB)
1.2–16 kHz
13.4 dB (+1.3/-2.3 dB)
1.2–16 kHz
12.3 dB (+0.7/-1.5 dB)
1.2–16 kHz
LF woofer (transducer)
8"
12" DL-type
15" EVX155
15" EVX155
HF driver (transducer)
1.25" DH3/2010A
3" ND6-16
3" ND6-16
3" ND6-16
Crossover Frequencies
3,500 Hz (passive)
Dx46 preset
Dx46 preset
Dx46 preset
Nominal Impedance
8 Ω (LF/HF)
8 Ω/16 Ω (LF/HF)
8 Ω/16 Ω (LF/HF)
8 Ω/16 Ω (LF/HF)
Minimum Impedance
5.8 Ω (LF/HF)
8.5 Ω/13.4 Ω (LF/HF)
6.3 Ω/14.0 Ω (LF/HF)
6.3 Ω/12.2 Ω (LF/HF)
Input Connections
Barrier strip
2 four-pin Speakon
2 four-pin Speakon
2 four-pin Speakon
Dimensions (H x W at front x D)
9.25" x 11.21" x 11.22"
(235 x 488 x 285 mm)
22.99" x 14.76" x 14.01"
(584 x 375 x 356 mm)
29.88" x 17.72" x 16.26"
(759 x 450 x 413 mm)
29.88" x 17.72" x 16.26"
(759 x 450 x 413 mm)
Net Weight
29.3 lb (13.3 kg)
69 lb (31.3 kg)
89.9 lb (40.8 kg)
89.9 lb (40.8 kg)
MB woofer (transducer)
See page 47 for XI-1082 Rigging and Accessories.
10
11
EVF Front-Loaded Systems
EVF STANDARD 12" TWO-WAY SYSTEMS
EVF-1122S/64
EVF-1122S/66
EVF-1122S/94
58 Hz – 16 kHz1,2
Frequency Range (-10 dB)
49 Hz – 19 kHz1,2
Recommended High-Pass Frequency
65 Hz
Sensitivity (SPL, 1 W/1 m)
98 dB
8Ω
Minimum Impedance
6Ω
Input Connections
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
60° x 40°
HF Transducer
2" ND2B diaphragm compression driver
120° x 60°
CONCERT
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Grille
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Environmental
Suspension
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D)
30.26" x 16" x 16.27" (768.6 x 406.3 x 413.3 mm)
INSTALL
Net Weight
63.1 lb (28.6 kg)
Half-space measurement in passive mode
2
FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3
EIA RS-426A (eight hours)
1
PORTABLE PA
EVF STANDARD 15" TWO-WAY SYSTEMS
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal 13-ply birch enclosure in
three finishes: EVCoat, PI and FG
• Four M10 metric eyebolts included
EVF-1152S/64
Frequency Range (-10 dB)
41 Hz – 18 kHz1,2
Recommended High-Pass Frequency
45 Hz
Sensitivity (SPL, 1 W/1 m)
101 dB
Max. SPL @ 1 m (calc.)
8Ω
Minimum Impedance
6Ω
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
40° x 30°
60° x 40°
60° x 60°
90° x 40°
LF Transducer
15" SMX2151 driver
HF Transducer
2" ND2B diaphragm compression driver
90° x 60°
90° x 90°
1,450 Hz
Enclosure Material
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Environmental
Suspension
EVF-1152S/99
500 W, 1000 W, 2000 W
Nominal Impedance (Passive)
Grille
EVF-1152S/96
134 dB
System Power Handling (Continuous3, Program, Peak)
15" TWO-WAY FULL-RANGE LOUDSPEAKERS
EVF-1152S/94
70 Hz – 14 kHz1,2
Internal Passive Crossover Frequency
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order crossover with HF protection
• Trapezoidal 13-ply birch enclosure in
three finishes: EVCoat, PI and FG
• Four M10 metric eyebolts included
EVF-1152S/66
Frequency Response (-3 dB)
Coverage (Nominal -6 dB) H° x V°
• 2" ND2B titanium HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with
coverage from 40º to 90º
• 101 dB sensitivity, 134 dB maximum SPL
90° x 90°
1,450 Hz
Enclosure Material
Input Connections
EVF-1152S
90° x 60°
Internal Passive Crossover Frequency
12" TWO-WAY FULL-RANGE LOUDSPEAKERS
• 2" ND2B titanium HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with
coverage from 60º to 120º
• 98 dB sensitivity, 131 dB maximum SPL
90° x 40°
12" SMX2121 driver
EVF-1152S/43
EVF-1122S
60° x 60°
LF Transducer
INSTALL
CONCERT
EVF "S" STANDARD SERIES
LOUDSPEAKERS
500 W, 1000 W, 2000 W
Nominal Impedance (Passive)
Coverage (Nominal -6 dB) H° x V°
EVF-1122S/126
131 dB
System Power Handling (Continuous3, Program, Peak)
EVF two-way full-range systems are offered in seven
coverage patterns that provide solutions for the widest
possible range of installation challenges. The 12" Constant
Directivity waveguides can be rotated to work with a
vertical or horizontal orientation. Biamp operation is
supported, but the sophisticated fourth-order crossover
and protection network makes cost-saving, passive
operation extremely attractive. Using optional rigging
accessories, you can create attractive clusters that include
EVF full-range systems, as well as EVF subwoofers or EVH
full-range systems. Cabinets are available in three finishes:
EVCoat (interior use), PI (indirect weather exposure) or FG
(fiberglass—for direct weather exposure); they include
twenty-two M10 threaded suspension points.
EVF-1122S/99
PORTABLE PA
LOUDSPEAKERS
Max. SPL @ 1 m (calc.)
EVF is the most comprehensive standard line of frontloaded loudspeaker systems ever offered for installed
sound. Available in 12" or 15" two-way configurations
and enhanced with dedicated low-frequency systems, EVF
loudspeakers match exceptional audio performance,
efficiency, ease-of-use and aesthetics with unprecedented
value. EVF systems incorporate the latest Electro-Voice
components to ensure years of reliability and exceptional
sound. "S" designated systems are equipped with SMX
series symmetric drive woofers and ND2B 2" titanium
compression drivers; upgraded "D" high definition
systems are equipped with our highest performance DVX
series symmetric drive woofers and the DH7N 3" pure
titanium compression driver.
EVF-1122S/96
Frequency Response (-3 dB)
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D)
Net Weight
30.26" x 18.5" x 18.37" (768.6 x 469.8 x 466.6 mm)
70.9 lb (32.1 kg)
Half-space measurement in passive mode
2
FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3
EIA RS-426A (eight hours)
1
See page 48–49 for EVF Rigging and Accessories.
12
13
EVF Front-Loaded Systems
EVF HIGH DEFINITION 12" TWO-WAY SYSTEMS
EVF-1122D/64
EVF-1122D/66
EVF-1122D/94
Frequency Response (-3 dB)
57 Hz – 18 kHz1,2
Frequency Range (-10 dB)
49 Hz – 21 kHz1,2
97 dB
Max. SPL/1 m (Calculated)1
131 dB
600 W, 1200 W, 2400 W
Nominal Impedance (Passive)
8Ω
6Ω
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
60° x 60°
90° x 40°
HF Transducer
3" DH7N diaphragm compression driver
Internal Passive Crossover Frequency
INSTALL
EVF-1122D
PORTABLE PA
• 3" DH7N titanium/neodymium
HF compression driver
• DVX3151A woofer with fully symmetric drive
• Rotatable Constant Directivity waveguide
• Six available patterns with
coverage from 60º to 120º
• 97 dB sensitivity, 131 dB maximum SPL
• Power handling: 600 W
continuous, 2400 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal 13-ply birch enclosure in
three finishes: EVCoat, PI and FG
• 22 M10 threaded suspension points
• Transformer kit available for distributed systems
• Four M10 metric eyebolts included
90° x 90°
120° x 60°
1,300 Hz
Enclosure Material
HIGH DEFINITION 12" TWO-WAY FULL-RANGE LOUDSPEAKERS
90° x 60°
12" DVX3121A woofer
13-ply weather-resistant birch
INSTALL
CONCERT
60° x 40°
LF Transducer
CONCERT
Input Connections
Coverage (Nominal -6 dB) H° x V°
LOUDSPEAKERS
Sensitivity 1 W/1 m
System Power Handling (Continuous3, Program, Peak)
The result is lower distortion, cleaner sound reproduction at
a given output level, compared with the equivalent
"S" version.
EVF-1122D/126
65 Hz
Minimum Impedance
EVF "D" high definition systems are equipped with our
highest performance DVX series symmetric drive woofers
and the DH7N 3" pure titanium compression driver.
EVF-1122D/99
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Grille
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Environmental
Suspension
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D)
30.26" x 16.00" x 16.27" (768.6 x 406.3 x 413.3 mm)
Net Weight
PORTABLE PA
LOUDSPEAKERS
Recommended High-Pass Frequency
EVF "D" HIGH DEFINITION SERIES
EVF-1122D/96
65.5 lb (29.7 kg)
Half-space measurement in passive mode
FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3
EIA RS-426A (eight hours)
1
2
EVF HIGH DEFINITION 15" TWO-WAY SYSTEMS
EVF-1152D
HIGH DEFINITION 15" TWO-WAY FULL-RANGE LOUDSPEAKERS
•
•
•
•
•
Compact and lightweight
Low distortion, high efficiency
Ideal for fixed installations
DVX3151A woofer with fully symmetric drive
3" DH7N titanium/neodymium
HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with
coverage from 40º to 90º
EVF-1152D/43
• 100 dB sensitivity, 134 dB maximum SPL
• Power handling: 600 W
continuous, 2400 W peak
• Fourth-order crossover with HF protection
• Trapezoidal 13-ply birch enclosure in
three finishes: EVCoat, PI and FG
• 22 M10 threaded suspension points
• Transformer kit available for distributed systems
• Four M10 metric eyebolts included
EVF-1152D/64
EVF-1152D/66
Frequency Response (-3 dB)
70 Hz – 18 kHz
Frequency Range (-10 dB)
40 Hz – 21 kHz1,2
Recommended High-Pass Frequency
45 Hz
Sensitivity 1 W/1 m
100 dB
600 W, 1200 W, 2400 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Input Connections
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
40° x 30°
60° x 40°
60° x 60°
90° x 40°
LF Transducer
15" DVX3151A woofer
HF Transducer
3" DH7N diaphragm compression driver
Internal Passive Crossover Frequency
90° x 90°
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Environmental
Suspension
90° x 60°
1,300 Hz
Enclosure Material
Grille
EVF-1152D/99
134 dB
System Power Handling (Continuous3, Program, Peak)
Coverage (Nominal -6 dB) H° x V°
EVF-1152D/96
1,2
Max. SPL/1 m (Calculated)1
See page 48–49 for EVF Rigging and Accessories.
EVF-1152D/94
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D)
Net Weight
30.26" x 18.5" x 18.37" (768.6 x 469.8 x 466.6 mm)
75.7 lb (34.4 kg)
Half-space measurement in passive mode
FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3
EIA RS-426A (eight hours)
1
2
14
15
EVF Front-Loaded Subwoofers
DUAL 15" FRONT-LOADED SUBWOOFER
•
•
•
•
•
CONCERT
12" FRONT-LOADED BASS ELEMENT
INSTALL
•
•
•
•
•
PORTABLE PA
EVF-1151S
See page 48–49 for EVF Sub Rigging and Accessories.
Enhanced bass for installations
Low-distortion EVS12SB woofer
99 dB sensitivity, 131 dB maximum SPL
Power: 400 W continuous, 1600 W peak
Trapezoidal 13-ply birch enclosure
• EVCoat, PI or FG finish
• 22 M10 threaded suspension points
• Four M10 metric eyebolts included
INSTALL
CONCERT
EVF-1121S
15" FRONT-LOADED BASS ELEMENT
•
•
•
•
•
Enhanced bass for installations
Low-distortion EVS15SB woofer
99 dB sensitivity, 131 dB maximum SPL
Power: 400 W continuous, 1600 W peak
Trapezoidal 13-ply birch enclosure
• EVCoat, PI or FG finish
• 22 M10 threaded suspension points
• Four M10 metric eyebolts included
Frequency Response (-3 dB)
EVF-1181S
• EVCoat, PI or FG finish
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
PORTABLE PA
LOUDSPEAKERS
A range of acoustically and aesthetically matched front-loaded low-frequency systems are available to compliment
your full-range systems. Cabinet heights are the same as those of EVF and EVH full-range loudspeakers systems, so
you can create functional, attractive clusters using these low-frequency boxes with almost any combination of EVF
and EVH loudspeakers.
High power handling for installations
Two premium DVX3159A woofers
101 dB sensitivity, 137 dB maximum SPL
Power: 1000 W continuous, 4000 W peak
Trapezoidal 13-ply birch enclosure
LOUDSPEAKERS
EVF-2151D
18" FRONT-LOADED SUBWOOFER
•
•
•
•
•
Ideal for installations
Low-distortion EVS18SB woofer
99 dB sensitivity, 131 dB maximum SPL
Power: 400 W continuous, 1600 W peak
Trapezoidal 13-ply birch enclosure
• EVCoat, PI or FG finish
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
EVF-1121S
EVF-1151S
EVF-2121S
EVF-1181S
EVF-2151D
70–98 Hz1,2
67–95 Hz1,2
54–145 Hz1,2
35–100 Hz1,2
40 Hz – 2.6 kHz1,2
Frequency Range (-10 dB)
48–120 Hz1,2
46–124 Hz1,2
41–330 Hz1,2
28–650 Hz1,2
30 Hz – 3.2 kHz1,2
Recommended High-Pass Frequency
50 Hz
35 Hz
45 Hz
33 Hz
35 Hz
Internal Passive Low-Pass Filter
100 Hz, 12 dB per octave
100 Hz, 12 dB per octave
None
None
None
Sensitivity (SPL, 1 W/1 m)
99 dB
99 dB
100 dB
99 dB
101 dB
Max. SPL @ 1 m (calc.)
131 dB
131 dB
135 dB
131 dB
137 dB
System Power Handling (Continuous3, Program, Peak) 400 W, 800 W, 1600 W
400 W, 800 W, 1600 W
800 W, 1600 W, 3200 W
400 W, 800 W, 1600 W
1000 W, 2000 W, 4000 W
Nominal Impedance
Passive: 4 Ω, Biamp: 8 Ω
Passive: 4 Ω, Biamp: 8 Ω
Passive: N/A, Biamp: 4 Ω
Passive: N/A, Biamp: 8 Ω
Passive: N/A, Biamp: 4 Ω
Minimum Impedance
Passive: 3.4 Ω, Biamp: 5.5 Ω
Passive: 3.4 Ω, Biamp: 6.4 Ω Passive: N/A, Biamp: 2.8 Ω
Passive: N/A, Biamp: 6 Ω
Passive: N/A, Biamp: 2.7 Ω
Input Connections
Euroblock; PI and FG versions include dual gland nut input panel cover
Coverage (Nominal -6 dB)
Transducer
Omnidirectional in normal operating range
12" EVS12SB driver
15" EVS15SB driver
Enclosure Material
EVF-2121S
DUAL 12" FRONT-LOADED SUBWOOFER
•
•
•
•
•
Ideal for installations
Low-distortion dual EVS12SB woofer
100 dB sensitivity, 135 dB maximum SPL
Power: 800 W continuous, 3200 W peak
Trapezoidal 13-ply birch enclosure
18" EVS18SB driver
Two 15" DVX3159A drivers
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Grille
• EVCoat, PI or FG finish
• 22 M10 threaded suspension points
• Four M10 metric eyebolts included
Two 12" EVS12SB driver
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Environmental
22 M10 threaded suspension points
(one EBK-M10-EVI kit of four forged eyebolts included)
Suspension
28 M10 threaded suspension points
(one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D)
30.26" x 16.0" x 16.27"
(768.6 x 406 x 413.3 mm)
30.26" x 18.5" x 18.4"
(768.6 x 470 x 467 mm)
30.26" x 18.5" x 18.4"
(768.6 x 470 x 467 mm)
30.26" x 26.6" x 28.6"
(768.6 x 675.6 x 726.4 mm)
30.26" x 26.6" x 28.6"
(768.6 x 675.6 x 726.4 mm)
Net Weight
57.7 lb (26.2 kg)
62.6 lb (28.4 kg)
82.4 lb (37.4 kg)
101.2 lb (45.9 kg)
117 lb (53.1 kg)
Half-space measurement in passive mode
2
FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
1
16
17
EVH Horn-Loaded Systems
EVH STANDARD TWO-WAY SYSTEMS
EVH-1152S/43
EVH-1152S/64
EVH-1152S/66
60 Hz – 15 kHz1
Frequency Range (-10 dB)
50 Hz – 20 kHz1
60 Hz
105 dB
105 dB
105 dB
105 dB
104 dB
Max. SPL @ 1 m (calc.)
139 dB
138 dB
138 dB
138 dB
138 dB
137 dB
8Ω
Minimum Impedance
6Ω
Coverage (Nominal -6 dB) H° x V°
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
40° x 30°
60° x 40°
60° x 60°
15" SMX2151 driver
HF Transducer
2" ND2B diaphragm compression driver
Internal Passive Crossover Frequency
90° x 60°
90° x 90°
1,300 Hz
Enclosure Material
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Grille
Standard versions: IEC 60529 IP33
PI and FG versions: IEC 60529 IP55
Environmental
INSTALL
Suspension
28 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
Dimensions (H x W x D)
30.26" x 30.26" x 26.77" (768.6 x 768.6 x 680.1 mm)
Net Weight
EVH systems are mechanically compatible with the EVF subs.
90° x 40°
LF Transducer
CONCERT
Input Connections
INSTALL
CONCERT
A 400 W SMX2151 woofer provides the EVH's deep, rich
lows, while horn loading extends directivity control below
500 Hz. High frequencies are handled by a pure titanium
compression driver—either a standard 2" ("S" models) or
a premium 3" with neodymium magnetic structure (high
500 W, 1000 W, 2000 W
143 lb (64.9 kg)
PORTABLE PA
PORTABLE PA
LOUDSPEAKERS
106 dB
Nominal Impedance (Passive)
Three finishes are available, including two for outdoor
applications. EVH loudspeakers come installation-ready
with 28 M10-threaded suspension points, making rigging
extremely flexible. Wherever extended pattern control
is a priority, the EVH series provides a proven, effective
solution.
EVH-1152S/99
Sensitivity (SPL, 1 W/1 m)
System Power Handling (Continuous2,
Program, Peak)
definition "D" models)—protected by an advanced fourthorder crossover network. Six coverage patterns (ranging
from 40° x 30° to 90° x 90°) on rotatable Constant
Directivity waveguides offer extraordinary versatility.
EVH-1152S/96
LOUDSPEAKERS
Recommended High-Pass Frequency
The EVH series is a dedicated installed sound solution
that builds on everything Electro-Voice has learned about
full-range, horn-loaded systems. Delivering exceptional
value in venues of all sizes, these mid-sized 15" two-way
cabinets feature a unique coaxial horn-loaded design
that is unmatched for pattern control and intelligibility in
reverberant environments.
EVH-1152S/94
Frequency Response (-3 dB)
EVH HIGH DEFINITION TWO-WAY SYSTEMS
EVH-1152S
TWO-WAY COAXIAL HORN-LOADED FULL-RANGE LOUDSPEAKERS
•
•
•
•
•
•
Ideal for reverberant spaces
Pattern control maintained below 500 Hz
15" SMX2151 woofer
2" ND2B titanium HF compression driver
Rotatable Constant Directivity waveguide
Six available coverage patterns
from 40º x 30º to 90º x 90º
• 106 dB sensitivity, 139 dB maximum SPL
EVH-1152D/43
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal enclosure in three
finishes: EVCoat, PI or FG
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
EVH-1152D/64
Frequency Range (-10 dB)
50 Hz – 20 kHz1
Recommended High-Pass Frequency
60 Hz
105 dB
105 dB
105 dB
105 dB
104 dB
Max. SPL @ 1 m (calc.)
139 dB
138 dB
138 dB
138 dB
138 dB
137 dB
System Power Handling
(Continuous2, Program, Peak)
500 W, 1000 W, 2000 W
Nominal Impedance (Passive)
8Ω
6Ω
106 dB sensitivity, 139 dB maximum SPL
Power handling: 500 W continuous, 2000 W peak
Fourth-order passive crossover with HF protection
Trapezoidal enclosure in three
finishes: EVCoat, PI or FG
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
40° x 30°
60° x 40°
60° x 60°
90° x 40°
15" SMX2151 driver
HF Transducer
3" DH7N diaphragm compression driver
Enclosure Material
Grille
•
•
•
•
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
LF Transducer
Internal Passive Crossover Frequency
Ideal for reverberant spaces
Pattern control maintained below 500 Hz
15" SMX2151 woofer
3" DH7N titanium/neodymium
HF compression driver
• Rotatable Constant Directivity waveguide
• Six available coverage patterns
from 40º x 30º to 90º x 90º
EVH-1152D/99
106 dB
Coverage (Nominal -6 dB) H° x V°
•
•
•
•
EVH-1152D/96
Sensitivity (SPL, 1 W/1 m)
Minimum Impedance
HIGH DEFINITION TWO-WAY COAXIAL HORN-LOADED FULL-RANGE LOUDSPEAKERS
EVH-1152D/94
60 Hz – 17 kHz1
Input Connections
EVH-1152D
EVH-1152D/66
Frequency Response (-3 dB)
Environmental
Suspension
Dimensions (H x W x D)
Net Weight
90° x 60°
90° x 90°
1,300 Hz
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP33
PI and FG versions: IEC 60529 IP55
28 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
30.26" x 30.26" x 26.77" (768.6 x 768.6 x 680.1 mm)
145.5 lb (66.1 kg)
Half-space measurement in passive mode
2
EIA RS-426A (eight hours)
1
See page 48–49 for EVH Rigging and Accessories.
18
19
EVA Subwoofers
EVA SUBWOOFERS
Features:
INSTALL
PORTABLE PA
High performance, cost-effective
Ideal for fixed installation line arrays
Two array elements in each module
Two 8" low-distortion woofers
Four 1.25" titanium diaphragm HF drivers
Advanced Hydra plane wave generators
Constant Directivity waveguide
•
•
•
•
•
•
LOUDSPEAKERS
EVA-1151D
15" SUBWOOFER LINE ARRAY ELEMENT
DVX3159A woofer for low distortion at high SPL
98 dB sensitivity (1 W/1 m half space)
Power handling: 500 W continuous, 2000 W peak
125/131 dB maximum SPL (continuous/peak)
• Integrated hidden suspension hardware
• Splays of 0° or 5° between modules
• Choice of three finishes: EVCoat, PI and FG
CONCERT
•
•
•
•
EVA-2151D
Features:
•
•
•
•
•
•
•
modules (16 line array elements) from a single amplifier
channel, eliminating the need for external crossovers
or DSP. The four full-range modules in the series are
complemented by two matching subwoofers that can be
flown in the array. If you think that your budget isn't big
enough for a great sounding line array, EVA may be just the
answer you're looking for.
INSTALL
CONCERT
The Expandable Vertical Array (EVA) series is a vertical line
array with a unique, elegant system design that provides
a simple solution for installed sound applications. EVA
offers true line array performance and coherent far-field
summing from the patented Hydra plane wave generator.
The internal, hidden rigging not only looks great, but also
makes EVA incredibly easy to install. The sophisticated
internal crossover lets you power up to eight EVA full-range
• DVX3159A woofer for low distortion at high SPL
• Steel-reinforced 13-ply birch enclosure
DUAL 15" SUBWOOFER LINE ARRAY ELEMENT
High sensitivity (104 dB) for high output
Super efficient: drive up to 8 boxes from a single amp channel
Sixth-order passive crossover with HF protection
Integrated hidden suspension hardware
Choice of three finishes: indoor, PI and FG
EVADA (EVA Design Assistant) software tool
• Two DVX3159A woofers for low
distortion at high SPL
• 100 dB sensitivity (1 W/1 m half space)
• Power handling: 1000 W continuous, 4000 W peak
• 130/136 dB maximum SPL (continuous/peak)
• Choice of two finishes: EVCoat and PI
(EVA-2151D not available in FG version)
PORTABLE PA
LOUDSPEAKERS
• High power, front loaded
• Ideal for fixed installations
• Seamless rigging with EVA line arrays
See page 48–49 for EVA Rigging and Accessories.
EVA-2082S 1220
EVA-2082S 126
DUAL-ELEMENT
120° BY 20°
FULL-RANGE LINEARRAY MODULE
DUAL-ELEMENT
120° BY 6°
FULL-RANGE LINEARRAY MODULE
EVA-2082S 1220
EVA-2082S 126
Frequency Response
(-3 dB)
38–200 Hz (half space)
50 Hz
35 Hz, 24 dB per Octave
BW
32 Hz, 24 dB per Octave
BW (half space)
Sensitivity (SPL, 1 W/1 m)
104 dB (3 module array)
98 dB, Arithmetic average,
55–100 Hz (half space)
100 dB, Anithmetic average,
55–100 Hz (half space)
131 dB (half space)
130/133/136 dB (half
space)
500 W, 1000 W, 2000 W
1000 W, 2000 W, 4000 W
8Ω
4Ω
135 dB
350, 700, 1400 W
16 Ω
Input Connections
Euroblock
Frequency Range (-10 dB)
DUAL-ELEMENT
90° BY 20° FULL-RANGE
LINE-ARRAY MODULE
45 Hz – 20 kHz
Coverage
(Nominal -6 dB) H°
120°
120°
Coverage
(Nominal -6 dB) V°
20°
6°
35–250 Hz (half space)
28–200 Hz (half space)
90°
90°
Omnidirectional
Omnidirectional
6°
20°
Omnidirectional
Omnidirectional
DVX3159A
Two DVX3159A
None
None
100 Hz active
100 Hz active
5.8 Ω
2.8 Ω
LF Transducer
Two 8" EVS2008 drivers
HF Transducer
Four 1.25" DH2005 diaphragm compression driver
Crossover Frequency
1,740 Hz
Minimum Impedance
12 Ω
Enclosure Material
Birch plywood
Grille
16 ga Galvanneal, powder-coated; PI Version: stainless steel with hydrophobic cloth
Suspension
20
EVA-2151D
48–250 Hz (half space)
Nominal Impedance
(Passive)
DUAL-ELEMENT
90° BY 6° FULL-RANGE
LINE-ARRAY MODULE
EVA-1151D
60 Hz – 19 kHz
System Power Handling
(Continuous, Program, Peak)
EVA-2082S 920
EVA-2082S 920
Recommended High-Pass
Frequency
Max. SPL @ 1 m (calc.)
EVA-2082S 906
EVA-2082S 906
EVA grid (sold separately)
Dimensions (H x W x D)
20.17" x 23.5" x 14.53"
20.25" x 23.5" x 14.1"
20.25" x 23.5" x 14.1"
20.17" x 23.5" x 14.53"
23.5" x 23.5" x 18.16"
30.5" x 23.42" x 31.2"
(512.2 x 596.9 x 369.1 mm) (514.4 x 596.9 x 358.2 mm) (514.4 x 596.9 x 358.2 mm) (512.2 x 596.9 x 369.1 mm) (596.9 x 596.9 x 461.3 mm) (930.4 x 597 x 792.5 mm)
Net Weight
81.0 lb (36.8 kg)
81.8 lb (37.1 kg)
81.8 lb (37.1 kg)
81.0 lb (36.8 kg)
89.1 lb (40.4 kg)
178 lb (80.8 kg)
21
EVU Ultracompact Systems
EVU-1082/95
ULTRACOMPACT TWO-WAY WITH SINGLE 8" WOOFER
LOUDSPEAKERS
EVU-2082/95
ULTRACOMPACT TWO-WAY WITH DUAL 8" WOOFERS
•
•
•
•
•
•
A fourth-order, 90 Hz high-pass filter is recommended for
use with all EVU loudspeakers.
Ultracompact 10 x 24" enclosure
90° x 50° rotatable Constant Directivity waveguide
Ultra-high power handling for size: 350 W continuous
126 dB maximum SPL
Asymmetrical trapezoidal enclosure design
Compatible with OmniMount
CONCERT
orientation. Sonically matched to complement the other
EV Innovation products, EVU helps make EV Innovation
the industry's most comprehensive and versatile line of
installed-sound loudspeakers.
INSTALL
Features:
PORTABLE PA
•
•
•
•
•
Sonically matched to all EV Innovation lines
Sophisticated 18 dB octave passive crossover/EQ networks
Asymmetrical enclosure for ideal under-balcony and stage-lip aiming
Optional NL4-type connector panel
One 1.3" diaphragm compression driver
EVU-1062/95
Ultracompact 8" x 14.5" enclosure
90° x 50° rotatable Constant Directivity waveguide
Ultra-high power handling for size: 160 W continuous
120 dB maximum SPL
Asymmetrical trapezoidal enclosure design
Compatible with OmniMount
ULTRACOMPACT TWO-WAY WITH DUAL 6.5" WOOFERS
•
•
•
•
•
•
22
U-bracket included
Optional 70 V and 100 V operation
OmniMount-compatible rear mounting points
Available in black or white (interior use)
ULTRACOMPACT TWO-WAY WITH SINGLE 6.5" WOOFER
•
•
•
•
•
•
EVU-2062/95
•
•
•
•
Ultracompact 8" x 21" enclosure
90° x 50° rotatable Constant Directivity waveguide
Ultra-high power handling for size: 300 W continuous
125 dB maximum SPL
Asymmetrical trapezoidal enclosure design
Compatible with OmniMount
INSTALL
CONCERT
Bringing ultracompact design to the EV Innovation family
of installation loudspeakers, the EVU series shines in
applications including delay, under-balcony fill, front-fill,
wall mounting and distributed audio. EVU loudspeakers
feature a rotatable Constant Directivity waveguide that
provides truly uniform sound dispersion while allowing the
horizontal coverage pattern to be independent of enclosure
Ultracompact 10 x 16" enclosure
90° x 50° rotatable Constant Directivity waveguide
Ultra-high power handling for size: 175 W continuous
123 dB maximum SPL
Asymmetrical trapezoidal enclosure design
Compatible with OmniMount
See page 49 for EVU Rigging and Accessories.
EVU-1062/95
EVU-2062/95
EVU-1082/95
EVU-2082/95
Frequency Response (−3 dB)
110 Hz – 16 kHz1
100 Hz – 16 kHz1
110 Hz – 16 kHz1
100 Hz – 16 kHz1
Frequency Response (−10 dB)
65 Hz – 20 kHz1
70 Hz – 20 kHz1
65 Hz – 20 kHz1
60 Hz – 20 kHz1
Recommended High-Pass Frequency
90 Hz
90 Hz
90 Hz
90 Hz
Axial Sensitivity (1 W/1 m)
92 dB
94 dB
95 dB
95 dB
Maximum SPL (calc.) Continuous, Peak
114, 120 dB
119, 125 dB
117, 123 dB
120, 126 dB
Waveguide
6" x 6", rotatable
6" x 6", rotatable
6" x 6", rotatable
6" x 6", rotatable
Horizontal Coverage
90°
90°
90°
90°
Vertical Coverage
50°
50°
50°
50°
Power Handling (Continuous, Peak)
160, 640 W2
300, 1200 W2
175, 700 W2
350, 1400 W2
LF Transducer
6.5" ICT-6.5-8 woofer
Two 6.5" ICT-6.5-8 woofers
8" ICT-8-8 woofer
Two 8" ICT-8-8 woofers
HF Transducer
1.3" diaphragm ICT-1-8 compression
driver
1.3" diaphragm ICT-1-8 compression
driver
1.3" diaphragm ICT-1-8 compression
driver
1.3" diaphragm ICT-1-8 compression
driver
Nominal Impedance
8Ω
8Ω
8Ω
8Ω
Minimum Impedance
6Ω
6Ω
6Ω
6Ω
Connectors
4-pin Euroblock (up to 10 AWG wire)
4-pin Euroblock (up to 10 AWG wire)
4-pin Euroblock (up to 10 AWG wire)
4-pin Euroblock (up to 10 AWG wire)
Enclosure Material
9-ply hardwood plywood
9-ply hardwood plywood
9-ply hardwood plywood
9-ply hardwood plywood
Minimum Impedance
Textured paint
Textured paint
Textured paint
Textured paint
Color
Black or white
Black or white
Black or white
Black or white
Grille, Standard Versions
18 ga steel with cloth behind
18 ga steel with cloth behind
18 ga steel with cloth behind
18 ga steel with cloth behind
Suspension
Six M8 threaded points
Six M8 threaded points
Six M8 threaded points
Six M8 threaded points
Dimensions (H x W x D)
8.21" x 14.6" x 8.14"
(209 x 370 x 207 mm)
8.21" x 21.0" x 8.14"
(209 x 533 x 207 mm)
9.73" x 16.1" x 9.34"
(247 x 409 x 237 mm)
9.73" x 24.2" x 9.34"
(247 x 615 x 237 mm)
Net Weight
14.4 lb (6.53 kg)
25.0 lb (11.3 kg)
16.3 lb (7.40 kg)
28.3 lb (12.8 kg)
PORTABLE PA
LOUDSPEAKERS
•
•
•
•
•
•
Half-space measurement
2
EIA RS-426A (eight hours)
1
23
EVI Variable Intensity Loudspeaker Systems
EVI VARIABLE INTENSITY COVERAGE PATTERN (3-2-1 RULE):
CONCERT
H
INSTALL
EVI-12
12" TWO-WAY VARIABLE INTENSITY LOUDSPEAKER
PORTABLE PA
•
•
•
•
•
EVI-15
• PRO™ Driver protection circuit
• Multi-angled housing
• Five 3/8" hanging points
W
idt
h
H
=
2H
th =
Leng
3H
15" TWO-WAY VARIABLE INTENSITY LOUDSPEAKER
•
•
•
•
•
EVI-28
Variable Intensity horn for even coverage
Two-way, full-range loudspeaker
High sensitivity
Vented LF enclosure
1.25" HF driver with titanium diaphragm
INSTALL
CONCERT
intelligibility. The Variable Intensity horn counters this
problem by increasing the sound sent to the back of the
room by six to eight dB, balancing SPL distribution without
the expense and complexity of additional systems or
components.
PORTABLE PA
LOUDSPEAKERS
EVI provides a simple, economical solution for permanent
installations requiring even coverage over a fixed
rectangular area. In a typical room, the distance from
a front-mounted loudspeaker to the last row is two
or more times the distance to the front row, resulting
in a substantial front-to-back difference in level and
LOUDSPEAKERS
If speaker mount-height = H, then coverage length = 3H, coverage width = 2H and first row coverage = 1H
Variable Intensity horn for even coverage
Two-way, full-range loudspeaker
High sensitivity
Vented LF enclosure
1.25" HF driver with titanium diaphragm
• PRO™ Driver protection circuit
• Multi-angled housing
• Five 3/8" hanging points
DUAL 8" TWO-WAY VARIABLE INTENSITY LOUDSPEAKER
•
•
•
•
•
•
Ideal for reverberant spaces
Variable Intensity horn for even coverage
Two-way, full-range loudspeaker
Vented LF enclosure
1.25" HF driver with titanium diaphragm
PRO™ Driver protection circuit
• Multi-angled housing
• Stacked, frequency-shaded woofers
for pattern control below 500 Hz
• Three 3/8" hanging points
EVI-12
EVI-15
EVI-28
Frequency Response (-10 dB)
50 Hz – 20 kHz
50 Hz – 20 kHz
60 Hz – 20 kHz
Sensitivity (SPL 1 W/1 m)
99 dB
100 dB
93 dB
Max. SPL/1m (calc.)
129 dB
130 dB
123 dB
Power Handling (Continuous, Peak) 250 W, 1000 W
250 W, 1000 W
250 W, 1000 W
Coverage, H x V
60° x 70° long throw, 110° x 90° short throw
65° x 65° long throw, 110° x 65° short throw
65° x 65° long throw, 110° x 65° short throw
LF Transducer
12"
15"
Two 8"
HF Transducer
1.25" DH3/2010A compression driver (1" exit)
1.25" DH3/2010A compression driver (1" exit)
1.25" DH3/2010A compression driver (1" exit)
Crossover frequency
2,000 Hz
2,000 Hz
2,000 Hz
Nominal impedance (minimum)
8Ω
8Ω
8Ω
Input connections
Screw terminal
Screw terminal
Screw terminal
Dimensions (H x W at front x D)
21.8" x 14" x 27.5" (554 x 356 x 699 mm)
23" x 16.9" x 30.2" (584 x 429 x 766 mm)
13.9" x 19.5" x 20.6" (353 x 496 x 523 mm)
Net Weight
48 lb (21.8 kg)
53 lb (24.0 kg)
36 lb (16.3 kg)
See page 49 for EVI Rigging and Accessories.
24
25
EVID In-Wall Speaker Systems
INSTALL
PORTABLE PA
Ultra-compact full-range
Ideal for restaurants, bars, patios and retail
Vented LF enclosure
0.75" titanium diaphragm HF driver with
neodymium magnetic structure
• Full-bandwidth overload protection (LF and HF)
•
•
•
•
•
Compact full-range
Ideal for restaurants, bars, patios and retail
Vented LF enclosure
1" titanium diaphragm HF driver with
neodymium magnetic structure
• Coherent Coverage Waveguide
•
•
•
•
•
•
•
•
•
•
Compact full-range
Ideal for shopping malls, sports bars and health clubs
Vented LF enclosure
1" titanium diaphragm HF driver with
neodymium magnetic structure
• Coherent Coverage Waveguide
EVID 3.2, EVID 4.2 AND EVID 6.2
•
•
•
•
•
•
Full-bandwidth overload protection (LF and HF)
Elliptical weather-resistant ABS enclosure
Paintable black or white finish
Magnetically shielded for video applications
Strong-Arm Mount for easy, flexible aiming
"T" version for 70 or 100 V distributed systems
Angle markers
INCLUDED
EV's Strong-Arm Mount (SAM) comes with each
EVID system and includes a hex key tool. SAM
has angle markers to make installation easier.
26
100°
EVID FM 6.2
90°
• Fully-sealed enclosure provides superior
isolation to protect adjacent rooms
• Secure Phoenix-style pass-through
connectors for easy wiring and installation
• Four point “quick mounting” tabs for
fast attachment in any wall cavity
• Can-mounted transformer for enhanced rigidity
• Ribbed back can eliminates flexing
6" TWO-WAY FLUSH-MOUNT LOUDSPEAKER
• Shallow profile, ideal for tight wall or ceiling spaces
• Tuned passive radiator extends
bass, enhances performance
• High quality 1" titanium dome tweeter
• Full-bandwidth overload protection
• 70 V, 100 V and 8 Ω operation in the same
model for off-the-shelf versatility
• Front-panel mode/wattage selector
Full-bandwidth overload protection (LF and HF)
Elliptical weather-resistant ABS enclosure
Paintable black or white finish
Magnetically shielded for video applications
Strong-Arm Mount for easy, flexible aiming
"T" version for 70 or 100 V distributed systems
DUAL 6" TWO-WAY SURFACE-MOUNT LOUDSPEAKER
4" TWO-WAY FLUSH-MOUNT LOUDSPEAKER
• Shallow profile, ideal for tight wall or ceiling spaces
• Tuned passive radiator extends
bass, enhances performance
• High quality 1" titanium dome tweeter
• Full-bandwidth overload protection
• 70 V, 100 V and 8 Ω operation in the same
model for off-the-shelf versatility
• Front-panel mode/wattage switch
Elliptical weather-resistant ABS enclosure
Paintable black or white finish
Magnetically shielded for video applications
Strong-Arm Mount for easy, flexible aiming
"T" version for 70 or 100 V distributed systems
DUAL 4" TWO-WAY SURFACE-MOUNT LOUDSPEAKER
•
•
•
•
EVID 6.2
EVID FM 4.2
DUAL 3.5" TWO-WAY SURFACE-MOUNT LOUDSPEAKER
•
•
•
•
EVID 4.2
EVID IN-WALL SPEAKER SYSTEMS
CONCERT
and surface-mount configurations, EVID loudspeakers
feature innovative designs that beautify not only the sound
of a room but also its looks. EVID 3.2, 4.2 and 6.2 models
are available in "T"-designated versions with internal 70 or
100 V line transformer. High power and high performance,
EVID is the superior solution to today's installation needs.
INSTALL
CONCERT
EVID premium commercial loudspeakers bring bestin-class sonic characteristics and stunning high fidelity
to a broad range of installation applications, including
performance and sports venues, retail environments,
conference and meeting rooms, and hospitality settings,
such as restaurants and bars. Available in both flush-mount
• Steel-reinforced cabinet with
mounting hardware included
• Paintable black or white finish
• One 3/8" 16-thread forged steel eyebolt is
included. A second is necessary for hanging.
• The mounting bracket passes
EIA 636 at a safety factor of
8:1 and included for onwall or corner mounting.
PORTABLE PA
LOUDSPEAKERS
• Supplemental bass for indoor systems
• Ideal for sports bars, dance floors,
retail and health clubs
• High-excursion woofer with dual voice
coil to accommodate L/R channels
• High sensitivity, high power-handling
• Crossed-over pass-thru for up to
four satellite speakers
• Trapezoidal shape for flexible placement
and optimal bass loading
EVID SURFACE-MOUNT SYSTEMS
EVID 3.2
12" CORNER-MOUNT, DUAL VOICE COIL SUBWOOFER
LOUDSPEAKERS
EVID 12.1
• Fully-sealed enclosure provides superior
isolation to protect adjacent rooms
• Secure Phoenix-style pass-through connectors
for easy wiring and installation.
• Four point “quick mounting” tabs for
fast attachment in any wall cavity
• Can-mounted transformer for enhanced rigidity
• Ribbed back can eliminates flexing
See page 49 for EVID Rigging and Accessories.
Frequency Range (-10 dB)
EVID 3.2
EVID 4.2
EVID 6.2
EVID 12.1
EVID FM 4.2
EVID FM 6.2
85 Hz – 20 kHz
65 Hz – 20 kHz
62 Hz – 20 kHz
40–140 Hz
52 Hz – 20 kHz
52 Hz – 20 kHz
Sensitivity (SPL, 1 W/1 m)
87 dB
89 dB
94 dB
100 dB (1/4 space)
87 dB
90 dB
Max. SPL/1m (calc.)
112 dB
115 dB
122 dB
128 dB (1/4 space)
110 dB
115 dB
150 W, 600 W
175 W, 700 W (per coil)
50 W, 200 W
75 W, 300 W
70 V: 1.75, 3.75, 7.5, 15,
30 W
70 V: 7.5, 15, 30, 60 W
150° x 150°
120° x 120°
Power Handling (Continuous, Peak)
75 W, 300 W
100 W, 400 W
Transformer taps
(transformer version only)
70 V: 5 W
100 V: 10 W
70 V: 3.75 W
70 V: 7.5 W
70 V/100 V: 7.5, 15, 30 W 70 V/100 V:15, 30, 60 W
Coverage, H x V
140° x 100°
120° x 80°
100° x 80°
LF Transducer
Two 3.5"
Two 4"
Two 6"
HF Transducer
0.75"
1"
1"
Nominal impedance
(non-transformer version)
8Ω
8Ω
8Ω
8Ω
Minimum impedance
(non-transformer version)
6Ω
6Ω
6Ω
6Ω
12"
4", plus 4" passive radiator 6", plus 6" passive radiator
1" (titanium dome)
1" (titanium dome)
8Ω
8Ω
Input connections
Spring terminal
Spring terminal
Spring terminal
Spring terminal
4-pin Phoenix
4-pin Phoenix
Dimensions (H x W at front x D)
9.2" x 5.1" x 6.5"
(234 x 127 x 165 mm)
12.2" x 6.9" x 8.5"
(310 x 175 x 216 mm)
16.5" x 9" x 11.75"
(419 x 228 x 298 mm)
16.25" x 23" x 12"
(412 x 584 x 305 mm)
13.78" x 7.41" x 3.76"
(350 x 188.3 x 95.6 mm)
18.31" x 10.08" x 3.95"
(465 x 256 x 100.3 mm)
Net Weight (incl. mounting bracket)
3.3 lb (1.5 kg)
8.5 lb (3.9 kg)
12 lb (5.3 kg)
40 lb (18.1 kg)
6.39 lb (2.9 kg)
12.79 lb (5.8 kg)
27
EVID Ceiling Speaker Systems
EVID C10.1
10" HIGH-POWER CEILING SUBWOOFER
INSTALL
EVID C4.2
EVID C12.2
PORTABLE PA
Designed for use in air-handling spaces
Ported enclosure for extended bass response
Waveguide-coupled 0.75" titanium-coated tweeter
Full-bandwidth overload protection
Integrated transformer for 70 V, 100 V or 8 Ω use
Front-panel mode/wattage selector
Ported enclosure for extended bass response
Waveguide-coupled 1" titanium-coated tweeter
Full-bandwidth overload protection
Integrated transformer for 70 V, 100 V or 8 Ω use
Front-panel mode/wattage selector
Safe, easy installation with included
tile bridge and mounting ring
• Complete package, requires no
additional accessories
• Low-profile LP version delivers
rich sound in tight spaces
• EVID C8.2 available in black or white
EVID C4.2
EVID C8.2
EVID C8.2LP
EVID C8.2HC
EVID C12.2
EVID C10.1
Frequency Range (-10 dB)
65 Hz – 20 kHz
50 Hz – 20 kHz
50 Hz – 20 kHz
65 Hz – 20 kHz
45–180 Hz
Sensitivity (SPL, 1 W @ 1 m)
86 dB
91 dB
93 dB
100 dB
94 dB
Power Handling (8 Ω)
80 W (overload protected)
100 W (overload protected)
100 W (overload protected)
100 W
150 W
Coverage Pattern
130° conical
110° conical
75° conical (@ >1 kHz)
90° average
180°
Transformer Power Taps
1.88 (70 V only), 3.75, 7.5, 15,
30 W
1.88 (70 V only), 3.75, 7.5, 15,
30 W
7.5 (70 V only), 15, 30, 60 W
4 (70 V only), 8, 16, 32, 64 W
ASC protected
7.5 (70 V only), 15, 30, 60 W
LF Transducer
4" polypropylene cone
8" polypropylene cone
8" polypropylene cone
plus waveguide
12" EVID 920-8B (coax)
10" polypropylene cone
HF Transducer
0.75" Ti Mylar Laminate Dome
1" Ti Mylar Laminate Dome
1" Ti Mylar Laminate Dome
1" coax
Input Configuration
8 Ω / 70 V / 100 V
8 Ω / 70 V / 100 V
8 Ω / 70 V / 100 V
8 Ω / 70 V / 100 V
8 Ω / 70 V / 100 V
Dimensions (H x Diameter)
6.93" x 7.13"
(176 x 181 mm)
7.01" x 10.63" (178 x 270 mm)
10.04" x 10.63" (255 x 270 mm)
11.99" x 12.60"
(303 x 320 mm)
13.18" x 16.31"
(333 x 414 mm)
11.99" x 12.60"
(303 x 320 mm)
Net Weight
6.0 lb (2.7 kg)
11.0 lb (5.0 kg)
13.2 lb (6.0 kg)
27.12 lb (12.3 kg)
15.4 lb (7.0 kg)
Acoustic Design
Cabinet Construction
Mounting System
Grille Construction
8" PATTERN-CONTROL TWO-WAY COAXIAL CEILING LOUDSPEAKER
•
•
•
•
•
•
28
Maximum fidelity and intelligibility for high ceilings
Ported enclosure for extended bass response
Waveguide-coupled 1" titanium-coated tweeter
Full-bandwidth overload protection
Integrated transformer for 70 V, 100 V or 8 Ω use
Front-panel mode/wattage selector
Available Colors
LOUDSPEAKERS
• 3/8" threaded-rod mount points for open ceilings
• Safe, easy installation with included
tile bridge and mounting ring
• Complete package, requires no
additional accessories
CONCERT
• Full-range power for high ceilings, large spaces
• High sensitivity, high power-handling
• Integrated transformer with automatic
saturation compensation for distortionfree 70 V, 100 V or 8 Ω use
• Front-panel mode/wattage selector
• White semi-gloss perforated grille
• Heavy-gauge steel enclosure in black
• Safe, easy installation with included
tile bridge and mounting ring
• Available in black or white
• Complete package, requires no
additional accessories
8" TWO-WAY COAXIAL CEILING LOUDSPEAKER
•
•
•
•
•
•
EVID C8.2HC
12" TWO-WAY COAXIAL CEILING LOUDSPEAKER
4" TWO-WAY COAXIAL CEILING LOUDSPEAKER
•
•
•
•
•
•
EVID C8.2
EVID C8.2LP
handle installer needs across a specific range of intended
applications. Sonically superior and aesthetically pleasing,
every EVID ceiling model installs with ease and provides
lasting value. For commercial sound across all venue
types, EVID has the ceiling covered.
INSTALL
CONCERT
Designed with both the contractor and listener in mind,
EVID ceiling speakers are high-performance problemsolvers that deliver exceptional sound in even the most
challenging situations. From the compact power of the C4.2
to the exclusive waveguide-coupled design of the C8.2HC,
each great-sounding EVID solution is uniquely suited to
• Internally damped heavy-gauge steel enclosure
• Safe, easy installation with included
tile bridge and mounting ring
• White semi-gloss perforated grille
• Complete package, requires no
additional accessories
Ported cabinet, internally damped, two-way (passive crossover included)
PORTABLE PA
LOUDSPEAKERS
• Supplemental LF for ceiling systems
• High-excursion woofer in ported
enclosure for extended lows
• Low pass network with overload protection
• Integrated transformer for 70 V, 100 V or 8 Ω use
• Front-panel mode/wattage selector
Dual ported cabinet, internally
damped
Steel enclosure and UL94V-0 rated baffle and bezel
Integrated 3-point toggle anchors
Powder-coated steel
White (paintable surface)
• Safe, easy installation with included
tile bridge and mounting ring
• White semi-gloss perforated grille
• Complete package, requires no
additional accessories
29
INSTALL
PORTABLE PA
• Ideal for both distributed and
near-field applications
• Designed for indoor and outdoor use
• Direct-radiating polypropylene-cone woofer
• 1" ferrofluid-cooled soft-dome tweeter
• High power-handling, ultra-linear
frequency response
• Vented trapezoidal enclosure of
high-impact polystyrene
• Passive crossover with power protection
for both woofer and tweeter
• Two OmniMount-compatible
0.25" suspension points
DUAL 8" TWO-WAY FULL-RANGE LOUDSPEAKER
This speaker remains one of our most popular
choices for speech reinforcement, for underbalcony and on-wall locations in permanent
installations, and as a high-quality monitor
system. Dual 8" drivers in a tuned enclosure are
matched to a 1" titanium compression driver with a
100° x 100° Constant Directivity waveguide.
The FRi-2082 comes with a mounting bracket
for horizontal or vertical orientation, while the
FRi-28LPM has non-skid rubber mounting feet to
make it more appropriate for stage monitoring.
•
•
•
•
• Versatile 45° aiming angle for under-balcony,
on-wall and stage monitoring applications
• Mounting bracket included (FRi-2082 only)
• Two 3/8" suspension points
Ultra-compact LF-optimized vented enclosure
1" HF driver on Constant Directivity waveguide
100° H x 100° V coverage pattern
Low-profile slanted design
S-40
Our top-of-the-line floor monitors, originally designed as
part of the X-Array touring line.
•
•
•
•
Two-way, high-output design
Vented LF enclosure
Two symmetrical 55° enclosure angles
Ultra compact for all-size stages
Xw12A
• 3" ND6-16 titanium/neodymium HF compression driver
• 80° x 55° Constant Directivity waveguide
• Neutrik Speakon paralleled pass-through
connectors on each end
• Two integrated handles
Xw15A
12" TWO-WAY FLOOR MONITOR
15" TWO-WAY FLOOR MONITOR
• DL12ST woofer with
Ring-Mode Decoupling
for vocal clarity
• EVX155 woofer with
4" voice coil
•
•
•
•
Compact with high output
Ideal for small-to-medium stages
Signal Synchronized Transducers™ for woofer/tweeter alignment
1.25" DH3/2010A titanium HF compression driver
TX1122FM 12" TWO-WAY FULL-RANGE MONITOR
•
•
•
•
90° H x 50° V Constant Directivity waveguide
Integrated 24 dB/octave crossover with HF protection
Power handling: 500 W continuous, 2000 W peak
Black EVCoat finish
TX1152FM 15" TWO-WAY FULL-RANGE MONITOR
• Low-distortion SMX2121 woofer
with fully symmetric drive
• 99 dB sensitivity, 132
dB maximum SPL
FRi-2082 & FRi-28LPM
Frequency Response (-3 dB)
Xw12A
Xw15A
65 Hz – 18 kHz
55 Hz – 18 kHz
• Ultra low-distortion SMX2151
woofer with fully symmetric drive
• 100 dB sensitivity, 133
dB maximum SPL
TX1122FM
TX1152FM
Speaker Type
Full-range
Full-range
Frequency Response (+/- 3 dB)
85 Hz – 20 kHz
Frequency Response (- 3dB)
70 Hz – 20 kHz
Recommended High-Pass Frequency System controller determined System controller determined
Frequency Response (-3 dB)
70 Hz – 20 kHz
65 Hz – 20 kHz
Sensitivity (SPL, 1 W @ 1 m)
85 dB
Frequency Range (-10 dB)
55 Hz – 16 kHz
98/110 dB
99/110 dB
Frequency Range (-10 dB)
55 Hz – 20 kHz
45 Hz – 20 kHz
Max. SPL/1m (calc.)
113 dB
Recommended High-Pass Frequency
50 Hz (12 dB/octave)
Axial Sensitivity (SPL, 1 W @ 1 m),
LF/HF
99 d B (1w/1m)
100 dB
Power handling (Long-term, Short-term)
120 W, 480 W
Axial Sensitivity, Biamp (SPL, 1 W @ 1 m)
93 dB
129/135 dB
133/135 dB
Max. SPL/1m (calc)
132 dB
133 dB
Coverage, H x V
100° x 100°
Max. SPL /1 m (calc.), full space
122 dB
Max. SPL @ 1 m (calc.), full space,
LF/HF
Sensitivity (SPL, 1 W/1 m)
Power Handling, Biamp (Continuous, Peak)
200 W, 800 W
300/75 W
600/75 W
500 W, 2000 W
9.8 dB (+3.8/-3.6 dB), 2–20,000 Hz
Long-Term Power Handling, LF/HF
500 W, 2000 W
Directivity Index
LF Transducer
5.25"
Coverage (nominal -6 dB) H x V
100° x 100° (Const. Dir. waveguide)
Short-Term Power Handling (peak),
LF/HF
System Power Handling
(Continuous, Peak)
1200/300 W
2400/300 W
Coverage(Nominal -6 dB)
90° H x 50° V
90° H x 50° V
HF Transducer
1" softdome
LF Transducer
Two 8"
HF Transducer
1" compression driver
55° x 80°
(Const. Dir. waveguide)
15" SMX2151
3,500 Hz
55° x 80°
(Const. Dir. waveguide)
12" SMX2121
Crossover frequencies
Coverage (nominal -6 dB) H° x V°
LF Transducer
HF Transducer
1.25" DH3/2010A
1.25" DH3/2010A
Nominal impedance (low Z version)
4Ω
Crossover Frequency
2,800 Hz
Directivity Index
Yes
Yes
3.7 Ω
Nominal Impedance (Biamp)
8Ω
11.6 dB (+3.0/-3.6 dB)
1,200–16,000 Hz
Internal Crossover
Minimum impedance (low Z version)
11.6 dB (+2.3/-2.1 dB)
1,200–16,000 Hz
Crossover Frequency
1,600 Hz
1,750 Hz
Input connections
Spring terminal
Input Connections
Barrier strip
LF woofer (transducer)
12" DL12ST
15" EVX155
Nominal Impedance (Passive)
8Ω
8Ω
Dimensions (H x W at front x D)
9.8" x 7" x 5.9" (249 x 178 x 150 mm)
Dimensions (H x W at front x D)
8.75" x 24.5" x 14" (222 x 620 x 356 mm)
HF throat diameter (transducer)
1.4" ND6-16
1.4" ND6-16
Minimum Impedance
6.4 Ω
6.2 Ω
5.7 lb (2.6 kg)
Net Weight
40 lb (18.2 kg)
Crossover Frequencies
Factory preset
Factory preset
Input Connections
Parallel Neutrik NL4
Parallel Neutrik NL4
Nominal Impedance, LF/HF
8 Ω/16 Ω
8 Ω/16 Ω
Minimum Impedance, LF/HF
8.2 Ω/10.5 Ω
7.2 Ω/14.3 Ω
Enclosure Material
Plywood and MDF with
EVCoat
Plywood and MDF with
EVCoat
Input Connections
2 four-pin Speakon
2 four-pin Speakon
Flying Suspension
Six 3/8" threaded inserts
Six 3/8" threaded inserts
Dimensions in floor position
(H x W at front x D)
23" x 17.2" x 12.2"
(534 x 449 x 313 mm)
25.4" x 18" x 13.4"
(644 x 452 x 340 mm)
Dimensions (H x W x D)
17.3" x 14.3" x 22.6"
(440 x 364 x 573 mm)
18.7" x 17.3" x 25.8"
(475 x 439 x 655 mm)
Net Weight
48 lb (21.9 kg)
62.5 lb (28.4 kg)
Net Weight
43.7 lb (19.8 kg)
51.9 lb (23.5 kg)
See page 50 for S-40 and page 47 for FRi-2082 Rigging and Accessories.
30
CONCERT MONITORS
TOUR X FLOOR MONITORS
FRi-2082
FRi-28LPM
Net Weight (including mounting bracket)
LOUDSPEAKERS
1" direct-radiating soft-dome tweeter that is
ferrofluid cooled. Built-in automatic power
limiting independently protects each driver from
unsafe transients. With mounting options that are
flexible enough for virtually any application, the
S-40 is perfect for anything from background
and foreground music in restaurants and clubs
to near-field monitoring in control rooms and
broadcast studios.
CONCERT
CONCERT
Delivering high performance in an ultra-compact
package, the S-40 is ideal for both distributed
and near-field applications requiring high-quality
sound. The two-way short-throw system is housed
in an optimally vented, high-impact polystyrene
enclosure that is suited for installation both
indoors and out. Lows are handled by a 5.25"
direct-radiating woofer with a polypropylene
cone, while the high-frequency section is a
INSTALL
ULTRACOMPACT 5.25" TWO-WAY FULL-RANGE LOUDSPEAKER
PORTABLE PA
LOUDSPEAKERS
S-40
See page 40 for Tour X Loudspeakers.
31
ZX/ZXA
15" TWO-WAY FULL-RANGE LOUDSPEAKER
INSTALL
ZX1
PORTABLE PA
Smooth, wide frequency response
Ideal for mains, fills or monitors
Velocity-compensated port for exceptional LF
Long-excursion weather-treated EV8L woofer
1.25" DH2005 titanium HF compression driver
Rotatable 90º x 50º waveguide for flexible coverage
Passive crossover with full-band overload protection
Install version of the ZX1
Indoor/outdoor design
Ideal for installed mains, fills or distributed sound
Velocity-compensated port for exceptional LF
Long-excursion weather-treated EV8L woofer
1.25" DH2005 titanium HF compression driver
Choice of 90º x 50º or 100º x 100º rotatable waveguide
Passive crossover with full-band overload protection
Also available in 70/100 volt transformer
•
•
•
•
•
•
•
High sensitivity, 123 dB maximum SPL
Power handling: 200 W continuous, 800 W peak
High-impact polypropylene enclosure
Compact monitor-friendly wedge shape
Integrated pole mount adapter and pocket handle
Four Metric mounting inserts
Available in black or white
ZXA1
Versatile performance for mains, fills or monitors
DVX3150A woofer with forced-air cooling
2" ND2 titanium/neodymium HF driver
Switchable biamp or passive crossover operation
Choice of 90º x 50º or 60º x 60º coverage waveguide
High sensitivity, 132 dB maximum SPL
Power handling: 600 W continuous, 2400 W peak
•
•
•
•
•
•
LOUDSPEAKERS
High-impact polypropylene enclosure
Wedge shape for monitors at 45° or 55°
Up to five anchor-plate attachments
Ten M8 mounting inserts
Integrated handle
Available in black or white
•
•
•
•
•
version with Electro-Voice patented ASC
(Automatic Saturation Compensation)
High sensitivity, 123 dB maximum SPL
Power handling: 200 W continuous, 800 W peak
Compact high-impact polypropylene enclosure
Integrated QuickSAM heavy-duty
Strong-Arm Mounting bracket
Paintable black or white finish
ZXA1-SUB
• Microphone and line level inputs
• Switchable high-pass filter for use with subwoofer
• Compact wedge-shape enclosure of
lightweight impact-resistant polystyrene
• Integrated pole mount adapter and pocket handle
• Four #8-32 suspension points for installation
• Available in black or white
12" POWERED SUBWOOFER
•
•
•
•
Pole mount for full-range systems
Dual XLR inputs and outputs
Switchable EQ modes for different applications
LED indicators for power on and limit
• Pole mount for full-range systems
12" TWO-WAY FULL-RANGE LOUDSPEAKER
Versatile performance for mains, fills or monitors
DVX3121A woofer with forced-air cooling
2" ND2 titanium/neodymium HF driver
Passive crossover
Choice of 90º x 50º or 60º x 60º coverage waveguide
High sensitivity, 131 dB maximum SPL
Power handling: 600 W continuous, 2400 W peak
Powered ZX1, ideal for portable and monitor use
Integrated 800 W 2-channel (biamp) amplifier
Long-excursion weather-treated EV8L woofer
1.25" DH2005 titanium HF compression driver
Rotatable 90º x 50º waveguide for flexible coverage
Steep crossover slopes and transducer protection
123 dB maximum SPL
• 15 mm plywood enclosure, internally
braced, with textured paint
• EVS-12S 12" woofer for powerful,
engaging bass response
• Class D lightweight amplifier
ZXA5
•
•
•
•
•
•
•
POWERED 8" TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
•
12" POWERED SUBWOOFER
• 15 mm plywood enclosure, internally
braced, with textured paint
• EVS-12S 12" woofer for powerful,
engaging bass response
ZX3
ALL-WEATHER 15" TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
•
8" TWO-WAY FULL-RANGE INDOOR/OUTDOOR LOUDSPEAKER
•
•
•
•
•
•
•
•
•
ZX1-SUB
ZX5
Lightweight high-impact polypropylene enclosure
Wedge shape for monitors at 45° or 55°
Integrated pole mount adapter and pocket handle
Mounting via attachment plates or eyebolts
Black finish
8" TWO-WAY FULL-RANGE COMPOSITE LOUDSPEAKER
•
•
•
•
•
•
•
ZX1i
with awesome richness and clarity. Sleek contemporary
styling fits in anywhere. Lightweight makes transport easy
while enabling a multitude of flying and mounting options
that are each supported by innovative mechanical solutions.
Whether for portable use or permanent installation, the
ZX/ZXA series represents the next level in advanced
loudspeaker technology.
•
•
•
•
•
INSTALL
CONCERT
Designed for top-notch quality with amazing versatility, the
ZX/ZXA series sets a new standard of performance and
practicality in sound reinforcement loudspeakers. Featuring
high-end components and lightweight molded enclosures,
the ZX/ZXA line is at home in any installed or portable
application, from commercial sound to clubs, houses of
worship, stages, arenas and stadiums. Newly-designed
high-power woofers and drivers ensure full-range sound
Perfect for portable mains and monitors
EVS15-SF woofer
1.25" DH3/2010A titanium HF driver
Passive crossover
90º x 50º coverage waveguide
High sensitivity, 132 dB maximum SPL
Power handling: 400 W continuous, 1600 W peak
PORTABLE PA
LOUDSPEAKERS
•
•
•
•
•
•
•
CONCERT
ZX4
•
•
•
•
•
•
High-impact polypropylene enclosure
Compact monitor-friendly wedge shape
Up to four anchor-plate attachments
Seven M8 mounting inserts
Integrated handle
Available in black and white
POWERED 15" TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
•
Ideal for both portable and installation use
Integrated 2-channel amplifier, 1000 W LF, 250 W HF
DVX3150A woofer with forced-air cooling
2" ND2 titanium/neodymium HF driver
90º x 50º coverage waveguide
High sensitivity, 133 dB maximum SPL
Switchable high-pass filter for use with subwoofer
•
•
•
•
•
•
•
PowerCon connector with slave through
Compact enclosure of high-impact polypropylene
Wedge shape for monitors at 45° or 55°
Integrated handle
Up to five anchor-plate attachments
Ten M8 mounting inserts
Available in black or white
See page 51 for ZX/ZXA Rigging and Accessories and page 50 for ZXA1and ZXA1-Sub Covers.
32
33
CONCERT
Passive Subwoofer
60 Hz – 20 kHz
53–125 Hz
Frequency
60 Hz – 20 kHz
Response (-3 dB)
ZX1-SUB
1
ZX3
ZX4
ZX5
Full-range
Full-range, mid-high,
two-way, wedges
Full-range, mid-high,
two-way, wedges
58 Hz – 15 kHz
60 Hz – 20 kHz
ZXA1
ZXA5
Full-range, powered monitors, powered
speakers, two-way, wedges
ZXA1-SUB
Powered Subwoofer
PORTABLE PA
58 Hz – 18 kHz
60 Hz – 20 kHz
(full-range mode)
58 Hz – 18 kHz
53–93 Hz
48 Hz – 20 kHz
(full-range mode)
50 Hz – 20 kHz
44–118 Hz1
123 dB
133 dB
126 dB1, 2
Frequency Range
48 Hz – 20 kHz
(-10 dB)
48 Hz – 20 kHz
42–200 Hz1
48 Hz – 20 kHz
42 Hz – 20 kHz
39 Hz – 20 kHz
Sensitivity
(SPL, 1 W/1 m)
94 dB
94 dB
94 dB
97 dB
100 dB
98 dB
Max. SPL/1m
(calc)
123 dB
123 dB
127 dB1,2
131 dB
132 dB
132 dB
Power Handling
200, 800 W
(Continuous, Peak)
200, 800 W
400 W Cont., 800 W
Prog., 1600 W Peak
600, 2400 W
400,1600 W
600, 2400 W
Coverage
(Nominal -6 dB)
90° x 50° rotatable
90° x 50° rotatable
Omnidirectional
100° x 100° rotatable
90° H x 50° V
60° H x 60° V
90° H x 50° V
90° H x 50° V
60° H x 60° V
90° x 50° rotatable
90° H x 50° V
60° H x 60° V
Omnidirectional
LF Transducer
8" EV8L
8" EV8L
12" DVX3121A
15" EVS15-SF
15" DVX3150A
8" EV8L
15" DVX3150A
12" EVS-12S Woofer
HF Transducer
1.25" DH2005
1.25" DH2005
2" ND2
1.25" DH3/2010A
2" ND2
1.25" DH2005
2" ND2
Recommended
High-Pass
Frequency
40 Hz
40 Hz
50 Hz
42 Hz
36 Hz
36 Hz
100 Hz
(user selectable)
Nominal Impedance (Passive)
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
Input Connections
Parallel Neutrik NL4
4-pin Phoenix
Speakon
Two NL4
2 conductor SJO cable
Parallel Neutrik NL4
and gland nut
Parallel Neutrik NL4
12" EVS-12S Woofer
1,800 Hz
1,500 Hz
100 Hz
Amplifier Power
(RMS)
800 W
1250 W
800 W
Power
Requirement
120V: 95V–132V, 50–60 Hz, 0.6A
230V:190V–264V, 50–60 Hz, 0.4A
Yes
Yes
Switchable biamp or
passive crossover
Crossover
Frequency
1.7 kHz
1.7 kHz
2 kHz
1,500 Hz
1,500 Hz
Minimum
Impedance
6Ω
6Ω
6.2 Ω
6.5 Ω
6.5 Ω
Enclosure Material
High-Impact Polystyrene
Polyester Powder Coated,
18 ga Galvanized Steel
Grille
7.5 Ω
•
•
•
•
Classic sound with road-ready reliability
Favorite of guitarists in all styles
High-performance heavy-duty design
200 W Power handling
9-ply, 15 mm plywood,
internally braced with
textured paint
High-Impact Polystyrene
16 ga Steel with Black
Powder Coat
Polyester Powder Coated, 18 ga Galvanized Steel
EVM12L Black Label
• Frequency response: 80 Hz – 7 kHz (-10 dB)
• Heavy-duty cast frame for reduced
low-frequency flex
• Large 16 lb (7.3 kg) magnet assembly
ZAKK WYLDE SIGNATURE GUITAR SPEAKER
• Official guitar loudspeaker of Zakk
Wylde and Black Label Society
• EVM-12L sound with enhanced
magnet design and venting
Two XLR Stereo Input
Yes
WORLD’S GREATEST GUITAR LOUDSPEAKER
700 W
XLR and TRS Combo;
XLR with Independent XLR
Gain
Internal Crossover Yes
EVM12L Classic
1
120V: 90V–132V,
50–60 Hz, 1.0A
230V: 190V–264V,
50–60 Hz, 0.6A
9-ply, 15 mm plywood,
internally braced with
textured paint
16 ga Steel with Black
Powder Coat
•
•
•
•
300 W power handling
Frequency response: 80 Hz – 7 kHz (-10 dB)
Sensitivity 100 dB
Large 16 lb (7.3 kg) magnet assembly
EVM12L Classic
EVM12L Black Label
Cone Diameter
12" (305 mm)
12" (305 mm)
Coil Diameter
2.5" (63.5 mm)
2.5" (63.5 mm)
Frequency Range (-10 dB)
80 Hz – 7 kHz
80 Hz – 7 kHz
Power Handling: Continuous (EIA), Peak
200, 1000 W
300, 1200 W
Sensitivity (SPL, 1 W @ 1 m)
100 dB
100 dB
Maximum SPL
125 dB
125 dB
Efficiency
5.9%
5.9%
Flying
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Outdoor
No
Yes
No
Yes
No
Yes
No
No
No
Impedance
8Ω
8Ω
Black
Frame Front Diameter
12.19" (309.6 mm)
12.19" (309.6 mm)
Magnet Diameter
7.5" (190.5 mm)
7.5" (190.5 mm)
Color
Black
Dimensions
(H x W x D)
15.75" x 17.50" x 18.00" 24.14" x 15.64" x
27.24" x 17.56" x
15.75" x 17.50" x 18.00"
17.98" x 11.12" x 10.38" 17.76" x 11.1" x 10.35"
27.01" x 17.52" x 15.98" 27.24" x 17.56" x 16.18" 17.99" x 11.1" x 10.39"
(400 x 444.5 x
14.26"
16.18"
(400 x 444.5 x
(457 x 282 x 264 mm) (451 x 282 x 263 mm)
(686 x 445 x 406 mm) (692 x 446 x 411 mm) (457 x 282 x 264 mm)
457.2 mm)
(613 x 397 x 362 mm)
(692 x 446 x 411 mm) 457.2 mm)
Overall Depth
5.25" (133.4 mm)
5.25" (133.4 mm)
Mounting Bolt Circle Diameter
11.56" (293.7 mm)
11.56" (293.7 mm)
Net Weight
18.52 lb (8.4 kg)
Baffle Cutout Diameter
11.06" (281.0 mm)
11.06" (281.0 mm)
Net Weight
19 lb (8.6 kg)
19 lb (8.6 kg)
1
2
34
Black, white
18.52 lb (8.4 kg)
Black
43.6 lb (19.8 kg)
Black, white
43.65 lb (19.8 kg)
Black
44.53 lb (20.2 kg)
Black, white
48.94 lb (22.2 kg)
INSTALL
INSTALL
ZX1i
Full-range, mid-high,
two-way
PORTABLE PA
Speaker Type
ZX1
Full-range, mid-high,
two-way, wedges
features improved power handling, magnet design and
venting. Either way, guitarists and bassists love how
tough the EVM12L sounds—and how tough it is. For
the world's most punishing players, there's only one guitar
speaker line that delivers the goods night after night, tour
after tour: the Electro-Voice EVM-12L.
CONCERT
LOUDSPEAKERS
Known for huge tone, gorgeous low-end and incredible
stability at extreme volumes, the EVM12L Classic 12"
musical instrument loudspeaker has been a favorite
since its introduction in 1983. For an even louder, harder
tone there's the EVM-12L Black Label, the official guitar
loudspeaker of Zakk Wylde and Black Label Society, which
LOUDSPEAKERS
ZX/ZXA
Black
19 lb (8.62 kg)
Black, white
50.49 lb (22.9 kg)
Half-Space
Typical maximum SPL value at one meter over the usable frequency range, measured with a pink-noise burst signal, using internal signal processing and amplifier driven to peak output.
46.0 lb (20.9 kg)
35
SX
WEATHER-RESISTANT DUAL-ELEMENT FULL-RANGE LINE ARRAY
SB122
• Parallel Neutrik Speakon high
current input connectors
• Strong, composite trapezoidal enclosure
• Pole mount on top for pairing with ZX1
• Integral handle
• Available in black
12" TWO-WAY FULL-RANGE LOUDSPEAKER
PORTABLE PA
•
•
•
•
•
•
Sx300PI
Sx300PIX
COMPACT 12" SUBWOOFER
• SB122 performance with enhanced
weather-resistance
• Low-pass filter for parallel connection
without added amp
• Large vent for enhanced LF output
• Cast-frame EVS12SB long-excursion woofer
• Power handling: 400 W continuous, 1600 W peak
INSTALL
Sx300E
LOUDSPEAKERS
multiple weather-ready versions provide flexible system
configuration for both indoor and outdoor venues. With high
power-handling, great coverage, and smooth, consistent
frequency response, cost-effective SX loudspeakers are
the hard-working, easy-setup solution to your installation
and portable system needs.
65° x 65° Constant Directivity waveguide
Very high sensitivity (105 dB 1 W / 1 m)
Power handling: 600 W continuous, 2400 W peak
Lightweight trapezoidal polypropylene enclosure
SuperSAM mounting system
adjusts 60° V and 180° H
CONCERT
CONCERT
The SX series includes some of the most popular
loudspeaker designs in history. SX loudspeakers offer
the tour-proven performance and reliability for which EV
is known. A versatile range of speaker configurations and
lightweight enclosures covers applications in commercial
sound, pro music, club sound, and performance and
sports venues. In live performance, the SX line can handle
tasks, such as front-of-house, side fills, delay lines or
stage monitors. For installed sound, easy mounting and
•
•
•
•
•
Compact, portable sound reinforcement
Designed for use alone or in arrays
Cast-frame DL12BFH woofer
1.25" DH3/2010A titanium HF compression driver
65° x 65° Constant Directivity waveguide
Ring-Mode Decoupling (RMD)
for increased intelligibility
•
•
•
•
•
Power handling: 300 W continuous, 1200 W peak
Dual Neutrik Speakon high-current connectors
Trapezoidal black or white polypropylene enclosure
Rubber feet and mating sockets for stacking
Integral handles, pole mount
Frequency Range (-10 dB)
50 Hz – 20 kHz
Recommended High-Pass Frequency
WEATHER-RESISTANT 12" TWO-WAY FULL-RANGE LOUDSPEAKERS
• Sx300 performance with enhanced weather-resistance
• PIX version has multi-tap transformer
for 70 or 100 V use
• Ideal for installation, alone or in arrays
• 1.25" DH3/2010A titanium HF compression driver
• 65° x 65° Constant Directivity waveguide
• Ring-Mode Decoupling (RMD)
for increased intelligibility
Sx300 (all)
•
•
•
•
•
•
Power handling: 300 W continuous, 1200 W peak
Neutrik Speakon (PI) or Phoenix (PIX) connectors
Trapezoidal enclosure of high-impact polypropylene
Rubber feet and mating sockets for stacking
Integral handles, pole socket, suspension points
Available in black or white
Sx600 (all)
SB122
70 Hz – 16 kHz
43–200 Hz
90 Hz
40 Hz (12 dB/octave)
Axial Sensitivity, Biamp (SPL, 1 W @ 1 m)
99 dB
105 dB
99 dB (half space)
Max. SPL @ 1 m (calc.), full space
Low Z: 131 dB
100V: 123 dB
139 dB
131 dB (half space)
Power Handling (Long-term, Short-term), Low Z
300, 1200 W
600, 2400 W
400, 1600 W
Coverage (nominal -6 dB) H x V
65° x 65° (Const. Dir. waveguide)
65° x 65° (Const. Dir. waveguide)
Omnidirectional
Directivity Index (800–16,000 Hz)
11.1 dB (+2.4/-4.1 dB)
11.3 dB
LF Transducers
12" DL12BFH
12" DL12BFH (LF),
12" ND12A (MB)
HF Transducer
1.25" DH3/2010A
2" DH2T
Crossover Frequencies
1,500 Hz
1,800 Hz
80–160 Hz
Nominal Impedance (non-transformer)
8Ω
4Ω
8Ω
Minimum Impedance (non-transformer)
5.0 Ω
3.5 Ω
6.0 Ω
Input Connections
2 four-pin Speakon
SJO cable/gland nut
2 four-pin Speakon
Dimensions (H x W at front x D)
23.07" x 16.89" x 12.28" (586 x 429 x 312 mm)
45.79" x 16.89" x 12.28" (1163 x 429 x 312 mm)
23.07" x 16.89" x 12.28" (586 x 429 x 312 mm)
Net Weight
31.97 lb (14.5 kg)
PIX: 39.0 lb (17.7 kg)
80 lb (36.3 kg)
33 lb (14.6 kg)
PORTABLE PA
LOUDSPEAKERS
• High output with exceptional outdoor performance
• Ideal for arenas, stadiums and race tracks
• 600 W multi-tap transformer (PIX
only) for 70 or 100 V use
• High intelligibility at high SPL (139 dB max)
• Cast-frame 12" DL12BFH woofer
• Neodymium-based 12" ND12A mid-driver
• 2" DH2T titanium HF compression driver
INSTALL
Sx600PI
Sx600PIX
12" EVS12SB
See page 50 for Sx300 and SB122 Rigging and Accessories.
36
37
QRx
15" THREE-WAY FULL-RANGE LOUDSPEAKER
INSTALL
QRx 112/75
QRx 212/75
•
•
•
•
•
•
PORTABLE PA
Compact with high output
Ideal for mains (small-to-medium rooms) or monitors
Cast-frame woofer, vented cabinet for extended LF
3" DH7 titanium HF compression driver
Rotatable 75° x 50° Constant Directivity waveguide
Asymmetric 10° down-angled coverage
•
•
•
•
•
•
Externally switchable biamped or passive operation
High sensitivity, 131 dB maximum SPL (peak)
Power handling: 300 W continuous, 1200 W peak
5-sided 13-ply birch enclosure with monitor slant
Built-in handles and L-Track rigging
Black or white
QRx 212H/75
Compact with high output
Ideal for mains (small-to-medium rooms) or monitors
Cast-frame woofer, vented cabinet for extended LF
3" DH7 titanium HF compression driver
Rotatable 75° x 50° Constant Directivity waveguide
Asymmetric 10° down-angled coverage
•
•
•
•
•
•
Externally switchable biamped or passive operation
High sensitivity, 130 dB maximum SPL (peak)
Power handling: 400 W continuous, 1600 W peak
5-sided 13-ply birch enclosure with monitor slant
Built-in handles and L-Track rigging
Black or white
COMPACT 18" SUBWOOFER
•
•
•
•
•
Concert-proven high-output performance
Accurate transient detail
EVX-180B woofer for superior linear excursion
High sensitivity, 137 dB maximum SPL (peak)
Power handling: 600 W continuous, 2400 W peak
•
•
•
•
Full-range performance with extra-full lows
Ideal for mains in small-to-medium rooms
Cast-frame woofer, vented cabinet for extended LF
3" DH7 titanium HF compression driver
Rotatable 75° x 50° Constant Directivity waveguide
Asymmetric 10° down-angled coverage
•
•
•
•
•
•
Externally switchable biamped or passive operation
High sensitivity, 135 dB maximum SPL (peak)
Power handling: 600 W continuous, 2400 W peak
Trapezpoidal 13-ply birch enclosure
Built-in handles and L-Track rigging
Black or white
Rectangular 13-ply birch vented enclosure
Built-in handles and 1 3/8" pole-mount receptacle
Four threaded T-nuts for casters or dollies
Black EVCoat finish
1
•
•
•
•
•
•
Externally switchable biamped or passive operation
High sensitivity, 133 dB maximum SPL (peak)
Power handling: 600 W continuous, 2400 W peak
Trapezpoidal 13-ply birch enclosure
Built-in handles and L-Track rigging
Black or white
•
•
•
•
•
Power handling: 1200 W continuous, 4800 W peak
Rectangular 13-ply birch vented enclosure
Built-in handles and sealed pocket wheels (Standard)
Integrated pole-mount receptacle (Standard)
Black EVCoat finish
COMPACT DUAL 18" SUBWOOFER
• High-level extended LF with concertproven performance
• Accurate transient detail
• Available in Standard and Riggable (L-Track) versions
• EVX-180B woofers for superior linear excursion
• High sensitivity, 139 dB maximum SPL (peak)
15" TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
38
Full-range performance with extra-full lows
Ideal for mains in small-to-medium rooms
Cast-frame woofer, vented cabinet for extended LF
3" DH7 titanium HF compression driver
Rotatable 75° x 50° Constant Directivity waveguide
Asymmetric 10° down-angled coverage
DUAL 12" TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
QRx 218S
QRx 118S
DUAL 12" TWO-WAY FULL-RANGE LOUDSPEAKER
12" TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
QRx 115/75
LOUDSPEAKERS
coverage without the need to tilt the enclosure toward the
audience. Our powerhouse DH7 large-format driver (3"
voice-coil, 1.4" exit) provides the high-frequency engine,
while a selection of DL and EVX woofers anchor the
low and sub frequencies. The combination of high-level
components, unique design and versatility make QRx series
one of the best values in the industry.
Biamped operation
High sensitivity, 130 dB maximum SPL
Power handling: 400 W continuous, 1600 W peak
Trapezpoidal (15°/side) 13-ply birch enclosure
Built-in handles and L-Track rigging
Black EVCoat finish
CONCERT
CONCERT
The QRx series has become the standard for regional
sound companies, rental professionals and contractors
who want compact high-performance loudspeakers with
concert-grade EV components. Covered with rugged
EVCoat, QRx looks great stacked, on poles, as monitors
or flown with simple, integrated, L-track rigging points.
Unique, fully-rotable asymmetrical waveguides have a
15-degree downward bias to ensure high-frequency
•
•
•
•
•
•
QRx 112/75
QRx 115/75
QRx 153/75
QRx 212/75
QRx 212H/75
QRx 118S
QRx 218S
Frequency Response (-3 dB)
75 Hz – 15 kHz
60 Hz – 15 kHz
50 Hz – 16 kHz
75 Hz – 16 kHz
75 Hz – 15 kHz
45–150 Hz
38–125 Hz
Frequency Range (-10 dB)
52 Hz – 18 kHz
45 Hz – 16 kHz
42 Hz – 20 kHz
52 Hz – 18 kHz
52 Hz – 18 kHz
30–250 Hz
31–250 Hz
45 Hz (12 dB/octave)
45 Hz (12 dB/octave)
36 Hz (12 dB/octave)
35 Hz (12 dB/octave)
102 dB
(102/112 dB)
100 dB Passive
(100/112 dB)
98 dB
—
102 dB
—
Recommended High-Pass Frequency 45 Hz (12 dB/octave)
45 Hz (12 dB/octave)
Axial Sensitivity (SPL, 1 W @ 1 m)
(Biamp operation)
98 dB
(98/110 dB)
98/105 dB
—
130 dB
98 dB Passive
(100/112 dB)
135 dB
133 dB
137 dB1
139 dB
600, 2400 W
600, 2400 W
600, 2400 W
1200, 4800 W
75° x 50°
(up 15°, down 35°)
Omnidirectional
Omnidirectional
Two 12" DL12BFH
12" DL12ST
12" DL12BFH
18" EVX-180B
Two 18" EVX-180B
3" DH7
3" DH7
1,500 Hz
(24 dB/octave)
1,200 Hz
(24 dB/octave)
100 Hz
(24 dB/octave)
100 Hz
(24 dB/octave)
Max. SPL @ 1 m (calc.)
131 dB
130 dB
Power Handling (Continuous, Peak)
350, 1400 W
450, 1800 W
Power Handling, Biamp: Continuous
Peak
LF 300 W/HF 75 W
LF 400 W/HF 75 W
LF 400 W/MB-HF 150 W LF 600 W/HF 75 W
LF 1200 W/HF 300 W LF 1,600 W/HF 300 W LF 1600 W/MB-HF 600 W LF 2400 W/HF 300 W
LF 600 W/HF 75 W
LF 2400 W/HF 300 W
Coverage (nominal -6 dB) H x V
75° x 50°
(up 15°, down 35°)
75° x 50°
(up 15°, down 35°)
75° x 50°
(up 15°, down 35°)
75° x 50°
(up 15°, down 35°)
LF Transducer
12" DL12BFH
15" DL15X
15" DL15ST
HF Transducer
3" DH7
3" DH7
MF: 8" MF8
HF: 3" DH7
Crossover Frequencies (slope in
Biamp mode)
1,500 Hz
(24 dB/octave)
1,500 Hz
(24 dB/octave)
1,200 Hz
Nominal Impedance (Biamp mode)
8 Ω (8 Ω/8 Ω)
8 Ω (8 Ω/8 Ω)
— (8 Ω/12 Ω)
4 Ω (4 Ω/8 Ω)
6 Ω (6 Ω/8 Ω)
8Ω
4Ω
Input Connections
2 Neutrik NL4
2 Neutrik NL4
2 Neutrik NL4
2 Neutrik NL4
2 Neutrik NL4
2 Neutrik NL4
2 Neutrik NL4
Dimensions (H x W at front x D)
26.6" x 15.35" x 14.6"
(675 x 390 x 372 mm)
29.9" x 17.7" x 16.02"
(759 x 450 x 407 mm)
48.8" x 18.4" x 19.09"
(1,240 x 467 x 485 mm)
38.98" x 15.47" x 14.77"
(990 x 393 x 375 mm)
15.5" x 39.0" x 14.9"
(394 x 990 x 378 mm)
35.5" x 17.7" x 23.6"
(902 x 450 x 600 mm)
39.96" x 22.05" x 23.7"
(1,015 x 560 x 602 mm)
Net Weight
57.3 lb (26.0 kg)
71 lb (32.0 kg)
103.6 lb (47 kg)
80 lb (36.5 kg)
84 lb (38 kg)
105 lb (47.5 kg)
150 lb (68 kg)
Half space
PORTABLE PA
LOUDSPEAKERS
• Compact with high-level, high-fidelity sound
• Cast-frame DL15ST woofer,
vented box for extended LF
• Horn-loaded 8" MF8 midrange driver
• 3" DH7 titanium HF compression driver
• Asymmetric (10° down-angled)
75° H x 50° V coverage
INSTALL
QRx 153/75
39
Tour X
TX1181
18" SUBWOOFER
INSTALL
TX1122
•
•
•
•
•
PORTABLE PA
Very high SPL with smooth response
Ideal as mains for small-to-medium clubs
Excellent pattern control for medium throw use
Dual SMX2151 woofers with fully symmetric drive
2" ND2 neodymium HF compression driver
60° x 40° rotatable Constant Directivity waveguide
High-power LF supplement to TX2152
Low-distortion port design
Two high-excursion EVS-18S woofers
Use with processor and dedicated amp channel
103 dB sensitivity, 138 dB maximum SPL
LOUDSPEAKERS
•
•
•
•
Power handling: 1000 W continuous, 4000 W peak
Six mount points for optional wheel kit
Braced plywood/MDF enclosure
Black EVCoat finish
97 dB sensitivity, 130 dB maximum SPL
Power handling: 500 W continuous, 2000 W peak
Lightweight trapezoidal plywood/MDF enclosure
Pole mount for use with subwoofer or stand
Six 3/8" threaded suspension points
Black EVCoat finish
See page 31 for Tour X Floor Monitors.
•
•
•
•
•
•
100 dB sensitivity, 133 dB maximum SPL
Power handling: 500 W continuous, 2000 W peak
Lightweight trapezoidal plywood/MDF enclosure
Pole mount for use with subwoofer or stand
Six 3/8" threaded suspension points
Black EVCoat finish
DUAL 15" TWO-WAY FULL-RANGE LOUDSPEAKER
•
•
•
•
•
•
40
•
•
•
•
•
•
15" TWO-WAY FULL-RANGE LOUDSPEAKER
• High-output, high-quality sound
• Excellent pattern control for medium throw use
• Low-distortion SMX2151 woofer
with fully symmetric drive
• 1.25" DH3/2010A titanium HF compression driver
• 60° x 40° rotatable Constant Directivity waveguide
• Advanced fourth-order crossover with HF protection
TX2152
DUAL 18" SUBWOOFER
12" TWO-WAY FULL-RANGE LOUDSPEAKER
• High-quality sound at high levels
• Excellent pattern control for short-to-medium throw
• Low-distortion SMX2120 woofer
with fully symmetric drive
• 1.25" DH3/2010A titanium HF compression driver
• 90° H x 50° V Constant Directivity waveguide
• Advanced fourth-order crossover with HF protection
TX1152
TX2181
CONCERT
Constant Directivity waveguides provide coveragepattern flexibility while 12" or 15" SMX woofers deliver
high power-handling with high sensitivity. Tour X 18"
subwoofers, meanwhile, use high-excursion EVS-18S
LF transducers to ensure plenty of impact with ultralow distortion. For tour-class performance in a portable
package that's surprisingly affordable, look no further than
Tour X.
Top-side socket for speaker pole
Six mount points for optional wheel kit
Braced plywood/MDF enclosure
Black EVCoat finish
INSTALL
CONCERT
Tour X brings the engineering excellence and aesthetic
design of EV's world-class tour systems to an innovative
and exciting series of portable loudspeakers. Combining
bold design and breakthrough performance, the Tour
X series is optimized for applications, such as club sound,
pro music and concert sound. The line's full-range
loudspeakers and monitors utilize either 1.25"
DH3/2010A or 2" ND2 compression drivers, protected
by an advanced fourth-order crossover. Rotatable
•
•
•
•
PORTABLE PA
LOUDSPEAKERS
• High-power LF supplement to TX1122 and TX1152
• High-excursion EVS-18S woofer
• 6 dB/octave low-pass filter for parallel
connection without added amp
• 100 dB sensitivity, 132 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
•
•
•
•
•
•
Advanced 6th-order crossover with HF protection
103 dB sensitivity, 139 dB maximum SPL
Power handling: 1000 W continuous, 4000 W peak
Internally braced trapezoidal plywood/MDF enclosure
Six 3/8" threaded suspension points
Black EVCoat finish
TX1122
TX1152
TX2152
TX1181
TX2181
Speaker Type
Full-range
Full-range
Full-range
Subwoofer
Subwoofer
Frequency Response (-3 dB)
60 Hz – 20 kHz
55 Hz – 20 kHz
55 Hz – 13 kHz
50–160 Hz
50–160 Hz
Frequency Range (-10 dB)
45 Hz – 20 kHz
40 Hz – 20 kHz
50 Hz – 18 kHz
45–700 Hz
40 Hz – 1.5 kHz
Sensitivity (SPL, 1 W/1 m)
97 dB
100 dB
103 dB
100 dB
103 dB
Max. SPL/1m (calc)
130 dB
133 dB
139 dB
132 dB
138 dB
System Power Handling
(Continuous, Peak)
500, 2000 W
500, 2000 W
1000, 4000 W
500, 2000 W
1000, 4000 W
Coverage(Nominal -6 dB)
90° H x 50° V
60° x 40° rotatable
60° x 40° rotatable
LF Transducer
12" SMX2120
15" SMX2151
Two 15" SMX2151
18" EVS-18S
Two 18" EVS-18S
HF Transducer
1.25" DH3/2010A
1.25" DH3/2010A
2" ND2
Internal Crossover
Yes
Yes
Yes
Low-pass filter
No
Crossover Frequency
1,750 Hz
1,650 Hz
1,750 Hz
Nominal Impedance (Passive)
8Ω
8Ω
4Ω
8Ω
4Ω
Minimum Impedance
5.4 Ω
5.6 Ω
3.1 Ω
7.5 Ω
2.9 Ω
Input Connections
Parallel Neutrik NL4
Parallel Neutrik NL4
Parallel Neutrik NL4
Parallel Neutrik NL4
Parallel Neutrik NL4
Enclosure Material
Plywood and MDF with EVCoat
Plywood and MDF with EVCoat
Plywood and MDF with EVCoat
Plywood and MDF with EVCoat
Plywood and MDF with EVCoat
Flying Suspension
Six 3/8" threaded inserts
Six 3/8" threaded inserts
Six 3/8" threaded inserts
Dimensions (H x W x D)
24.25" x 15.04" x 14.96"
(616 x 382 x 380 mm)
30.55" x 17.56" x 17.56"
(776 x 446 x 446 mm)
45.43" x 20" x 18.54" in
(1154 x 508 x 471 mm)
30.28" x 17.28" x 23.27"
(769 x 439 x 591 mm)
45.43" x 20" x 27.2"
(1154 x 508 x 691 mm)
Net Weight
44.53 lb (20.2 kg)
61.29 lb (27.8 kg)
94.36 lb (42.8 kg)
74.52 lb (33.8 kg)
123.68 lb (56.1 kg)
41
ETX Powered Loudspeakers
ETX-35P
15" TWO-WAY POWERED
12" THREE-WAY POWERED
• 15" LF SMX woofer
• 1.25" HF titanium compression driver
• 2000 W Class-D power amplifier
with integrated FIR-Drive DSP
• 135 dB peak SPL
INSTALL
ETX-10P
10" TWO-WAY POWERED
ETX-12P
PORTABLE PA
• 10" LF SMX woofer
• 1.25" HF titanium compression driver
• 2000 W Class-D power amplifier
with integrated FIR-Drive DSP
• 134 dB peak SPL
ETX-15SP
LOUDSPEAKERS
15" POWERED SUBWOOFER
• 15" DVX woofer for maximum punch
• 1800 W Class-D power amplifier
with integrated FIR-Drive DSP
• 134 dB peak SPL
• Special DSP preset for true cardioid performance
across the full operating bandwidth
• Combo pole cup (insert and threaded)
for use with full-range models
• Removable casters
INSTALL
CONCERT
A versatile high-end choice for live entertainment venues,
rental companies, pro musicians and DJs, and installed
sound, the family offers technologies from EV concert/touring
systems. Three two-way models, a three-way model and two
subs are available.
The ETX Powered Loudspeaker family extends the awardwinning industrial design introduced by Electro-Voice in
2013. Inside each low-profile, tour-grade wood enclosure
are a range of unique new features that set the family apart,
combining intelligent technology and innovative industrial
design for spectacular results across all applications. EVengineered high-efficiency transducers and high-powered
Class-D amplifiers, Signal Synchronized Transducers (SST)
waveguide design and smart FIR-Drive DSP all work together
to provide peerless EV sound quality and precise coverage
at the highest SPLs. Designed, engineered, tested and
assembled for ultimate reliability by Electro-Voice in the USA.
15" LF SMX woofer
6.5" MF driver
1.25" HF titanium compression driver
2000 W Class-D power amplifier
with integrated FIR-Drive DSP
• 136 dB peak SPL
12" TWO-WAY POWERED
• 12" LF SMX woofer
• 1.25" HF titanium compression driver
• 2000 W Class-D power amplifier
with integrated FIR-Drive DSP
• 135 dB peak SPL
ETX-18SP
PORTABLE PA
LOUDSPEAKERS
The new ETX Powered Loudspeaker family builds upon
the industry-leading innovation and 85-year heritage of
Electro-Voice audio engineering to offer the most advanced
professional-grade products for an array of applications.
•
•
•
•
CONCERT
ETX-15P
18" POWERED SUBWOOFER
• 18" DVX woofer for maximum punch
• 1800 W Class-D power amplifier
with integrated FIR-Drive DSP
• 135 dB peak SPL
• Special DSP preset for true cardioid performance
across the full operating bandwidth
• Combo pole cup (insert and threaded)
for use with full-range models
• Removable casters
INTELLIGENT TECHNOLOGY, INNOVATIVE DESIGN
• EV’s FIR-Drive utilizes the latest Finite Impulse Response (FIR) filter
technology to optimize transducer linearity. Advanced limiter algorithms
for independent peak and thermal transducer protection.
• Complete full-function DSP control via a single-knob interface. LCD screen for easy
system set-up and monitoring: location/application EQ presets (e.g. tripod, mounted,
suspended, live, music, speech), limiter status, input level controls/meters and master
volume control to ensure optimal gain structure. Parametric EQ allows for more
precise configuration. Subs feature a preset for true cardioid performance.
• EV-patented Signal Synchronized Transducers (SST) waveguide design
provides precise and consistent coverage across all system configurations.
Waveguides are custom-designed and optimized per model.
SUPERIOR POWER AND PERFORMANCE
• State-of-the-art components deliver the legendary EV sound quality
and reliability the pros trust: 1800 W (subs) and 2000 W (full-range)
Class-D power amplifiers with integrated DSP produce high SPLs utilizing
high-sensitivity, low-distortion transducers (including DVX and SMX series
woofers and precision DH3-B HF titanium compression drivers).
• Lightweight, ergonomic, durable and compact 18-mm, 13-ply birch plywood
enclosures finished with EVCoat. Eight mounting points for permanent installations
(full-range models). Custom die-cast aluminum pole cups, handles and hardware.
42
ETX-10P
ETX-12P
ETX-15P
ETX-35P
ETX-15SP
ETX-18SP
Speaker Type
Two-way
Two-way
Two-way
Three-way
Subwoofer
Subwoofer
Frequency Response (-3 dB)
85 Hz – 20 kHz1
55 Hz – 20 kHz1
48 Hz – 20 kHz1
48 Hz – 20 kHz1
37–150 Hz2
33–150 Hz2
Frequency Range (-10 dB)
65 Hz – 20 kHz1
43 Hz – 20 kHz1
40 Hz – 20 kHz1
38 Hz – 20 kHz1
32–180 Hz2
28–180 Hz2
Maximum SPL
134 dB peak3
135 dB peak3
135 dB peak3
136 dB peak3
134 dB peak3
135 dB peak3
Low Pass Frequency
Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz
Coverage (H x V)
90° x 60°
90° x 60°
90° x 60°
60° x 40°
Power Rating
2000 W
2000 W
2000 W
2000 W
1800 W
1800 W
LF Transducer
10" SMX2100
12" SMX2120
15" SMX2150
15" SMX2151
15" DVX3159A
18" DVX3180A
MB Transducer
6.5" EVS-6C
HF Transducer
1.25" DH3-B
1.25" DH3-B
1.25" DH3-B
1.25" DH3-B
Crossover Frequency
1700 Hz
1600 Hz
1500 Hz
700 Hz, 2900 Hz
Power Consumption
100–240 V~, 50–60 Hz, 1.6–0.8 A⁴
Connectors
Two XLR/TRS combo jack and one XLR link output
Enclosure
Grille
16 AWG steel with powdercoat
Suspension
Dimensions (H x W x D)
Two XLR/TRS combo jacks and two XLR link output
18 mm, 13-ply birch plywood with EVCoat
Eight M10 suspension points
21" x 13" x 14"
(526 x 330 x 365 mm)
24" x 15" x 16"
(613 x 381 x 400 mm)
27" x 17" x 18"
(691 x 431 x 447 mm)
40" x 18" x 17"
(1023 x 469 x 426 mm)
Dimensions (H x W x D) with casters
Net Weight
44.8 lb (20.3 kg)
52.0 lb (23.6 kg)
Full space measurement using the music DSP preset.
2
Half space measurement using the music DSP preset and 150 Hz low pass.
3
Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
⁴ Current rating is ⅛ power.
61.1 lb (27.7 kg)
84.2 lb (38.2 kg)
19" x 23" x 27"
(471 x 576 x 692 mm)
22" x 27" x 31"
(550 x 675 x 777 mm)
19" x 23" x 32"
(471 x 576 x 825 mm)
22" x 27" x 36"
(550 x 675 x 910 mm)
91.9 lb (41.7 kg)
114.2 lb (51.8 kg)
1
43
Live X
INSTALL
12" TWO-WAY FULL-RANGE
ELX112P
PORTABLE PA
• Compact power for sound
reinforcement and stage monitoring
• EVS-12K woofer
• 1.5" DH-1K titanium HF compression driver
• 55 Hz – 20 kHz frequency range
• 90° x 50° coverage-pattern waveguide
• 60° monitor angle
• 132 dB maximum SPL
• Power handling: 250 W
continuous, 1000 W peak
• Braced 15 mm plywood enclosure
• Pole mount or stack with Live X subwoofers
• Black textured finish
ELX115
15" TWO-WAY FULL-RANGE
•
•
•
•
•
•
•
•
•
ELX115P
•
•
•
•
•
•
•
•
More power, fuller sound for larger rooms
EVS-15K woofer
1.5" DH-1K titanium HF compression driver
50 Hz – 20 kHz frequency range
90° x 50° coverage-pattern waveguide
60° monitor angle
134 dB maximum SPL
Power handling: 400 W
continuous, 1600 W peak
• Braced 15 mm plywood enclosure
• Pole mount or stack with Live X subwoofers
• Black textured finish
ELX118
18" SUBWOOFER
•
•
•
•
•
Supplemental bass for ELX112 or ELX115
EVS-18K woofer for extended LF
35 Hz – 200 Hz frequency range
134 dB maximum SPL
Power handling: 400 W
continuous, 1600 W peak
• Braced 15 mm plywood enclosure
• Stack or pole-mount full-range boxes
• Black textured finish
44
ELX112 performance with self-amplification
50 Hz – 20 kHz frequency range
Lightweight, cool-running 1000 W Class D amp
Biamped with 24 dB/octave crossover
Transducer protection
Bypassable high-pass for external subwoofer
XLR, TRS and RCA connections
Versatile gain, mixing and processing controls
Pre- or post-mix parallel outputs
ELX215
DUAL 15" TWO-WAY FULL-RANGE
• High-volume punch and
ultra-wide frequency response
• Ideal for mains
• Two EVS-15K woofers for extended LF
• 1.5" DH-1K titanium HF compression driver
• 38 Hz – 20 kHz frequency range
•
•
•
•
•
90° x 50° coverage-pattern waveguide
137 dB maximum SPL
Power handling: 600 W continuous, 2400 W peak
Braced 15 mm plywood enclosure
Black textured finish
POWERED 15" TWO-WAY FULL-RANGE
•
•
•
•
•
•
•
•
•
ELX118P
CONCERT
POWERED 12" TWO-WAY FULL-RANGE
INSTALL
CONCERT
ELX112
hardy stackable enclosures of solid wood, making them
lighter than comparable-quality composite or plastic boxes
and therefore easier to load, transport and set up. With
high output, extended frequency range and high sensitivity,
Live X loudspeakers are clean, flat and hot, making music of
all kinds sound its best. The Live X series is serious gear for
serious sound.
PORTABLE PA
LOUDSPEAKERS
Clear, powerful and musical, the Live X series was born to
command the stage for professional music performance.
Available in both powered and passive versions, Live X
loudspeakers offer top-quality components in remarkably
affordable configurations that put the EV-quality experience
within reach for artists, engineers and live-sound
businesses. Designed for a wide range of portable
sound applications, Live X loudspeakers are housed in
LOUDSPEAKERS
Live X
ELX115 performance with self-amplification
44 Hz – 20 kHz frequency range
Lightweight, cool-running 1000 W Class D amp
Biamped with 24 dB/octave crossover
Transducer protection
Bypassable high-pass for external subwoofer
XLR, TRS and RCA input connections
Versatile gain, mixing and processing controls
Pre- or post-mix parallel outputs
POWERED 18" SUBWOOFER
•
•
•
•
•
•
•
ELX118 performance with self-amplification
EVS-18K woofer for extended LF
32 Hz – 130 Hz frequency range
Lightweight, cool-running 700 W Class D amp
Selectable normal/boost modes
XLR and TRS combo input
XLR parallel output
See page 50 for Live X Covers.
ELX112
ELX112P
ELX115
ELX115P
Speaker Type
Full-range, two-way,
wedges
Full-range, two-way,
wedges
Full-range, mid-high,
two-way
Full-range, mid-high,
two-way
Frequency Response (-3 dB)
82 Hz – 18 kHz
60 Hz – 18 kHz
75 Hz – 18 kHz
Frequency Range (-10 dB)
55 Hz – 20 kHz
50 Hz – 20 kHz
50 Hz – 20 kHz
Axial Sensitivity (SPL, 1 W/1 m) 94 dB
Max. SPL/1m (calc)
132 dB Half Space
Recommended High-pass
Frequency
45 Hz
40 Hz
System Power Handling
(Continuous, Program, Peak)
250 W Continuous
1000 W Peak
400 W Continuous
1600 W Peak
Coverage (Nominal -6 dB)
HxV
90° x 50°
Power Rating
ELX118P
ELX215
Subwoofer
Subwoofer
Full-range, mid-high,
two-way
56 Hz – 18 kHz
50–100 Hz
42–100 Hz
62 Hz – 18 kHz
44 Hz – 20 kHz
35–200 Hz
32–130 Hz
38 Hz – 20 kHz
95 dB
132 dB
90° x 50°
134 dB Half Space
90° x 50°
1000 W
ELX118
96 dB
134 dB
134 dB
96 dB
134 dB
30 Hz
137 dB
35 Hz
600 W Continuous
2400 W Peak
90° x 50°
Omnidirectional
1000 W
Omnidirectional
90° x 50°
700 W
LF Transducer
12" EVS-12K woofer
12" EVS-12K woofer
15" EVS-15K woofer
15" EVS-15K woofer
HF Transducer
DH-1K
DH-1K
DH-1K
DH-1K
18" EVS-18K woofer
18" EVS-18K woofer
Internal Crossover
Yes
Yes
Yes
Yes
Yes
Yes
Nominal Impedance (Passive)
8Ω
8Ω
Yes
8Ω
8Ω
8Ω
8Ω
Input Connections
Parallel Neutrik NL4
4Ω
XLR, TRS & RCA
Parallel Neutrik NL4
XLR, TRS & RCA
Parallel Neutrik NL4
XLR, TRS & RCA
Woofer Size
12" (304.8 mm)
Parallel Neutrik NL4
12" (304.8 mm)
15" (381 mm)
15" (381 mm)
18" (457.2 mm)
18" (457.2 mm)
15" (381 mm)
Dimensions (H x W x D)
23.9" x 14.25" x 13.39" 23.9" x 14.25" x 13.39" 27.87" x 17.01" x 15.04" 27.87" x 17.01" x 15.04" 26.02" x 19.96" x 22.6" 26.02" x 19.96" x 22.6" 45.43" x 17.01" x 19.72"
(607 x 362 x 340 mm) (607 x 362 x 340 mm) (708 x 432 x 382 mm) (708 x 432 x 382 mm) (661 x 507 x 574 mm) (661 x 507 x 574 mm) (1154 x 432 x 501 mm)
Net Weight
35.27 lb (16.0 kg)
37.04 lb (16.8 kg)
48.28 lb (21.9 kg)
49.6 lb (22.5 kg)
15" EVS-15K woofer
DH-1K
67.46 lb (30.6 kg)
69 lb (31.3 kg)
89.73 lb (40.7 kg)
45
ZLX
12" TWO-WAY PASSIVE LOUDSPEAKER
INSTALL
ZLX-12P
15" TWO-WAY PASSIVE LOUDSPEAKER
• 15" woofer for extended low frequency response
• 1.5" high-frequency titanium compression driver
• Durable composite construction with innovative
hi/lo grip design for easy pole mounting
• Patented split-baffle design for
superior drive time alignment
• 44 Hz – 20 kHz frequency range
12" TWO-WAY POWERED LOUDSPEAKER
PORTABLE PA
• Compact and lightweight
• Standout choice for sound reinforcement
or stage-monitoring
• 12" woofer for low-end punch in a compact enclosure
• LCD display and one-knob DSP control
with presets for precise, speedy set up
• Input level meters and independent amplifier
control to ensure optimal gain structure
• Front LED for "power on" and "limit" indication
ZLX-15P
ZLX-15
LOUDSPEAKERS
quality of EV-engineered drivers with a custom-built 1000 W
Class-D amplifier module and feature an LCD display and
innovative single-knob DSP control with presets so you can
quickly optimize loudspeaker performance according to your
performance style and space. Whether used as mains or
monitors, ZLX will enhance your gig with incredible sonic
impact and intelligibility – the renowned ''EV Sound" the
pros trust.
• 250 W continuous and 1000 W peak power handling
• 96 dB SPL sensitivity; 126 dB maximum SPL
INSTALL
CONCERT
Electro-Voice condenses decades of proven pro audio
engineering know-how into ZLX, its next generation of
high-performance portable loudspeakers. Available in
powered and passive 12" and 15" two-way versions, ZLX
was designed with a singular goal: to deliver best-in-class
performance across every detail. No other comparably
priced loudspeaker sounds better or gives you more control
over your sound. ZLX powered models match the legendary
• 250 W continuous and 1000 W peak power handling
• 95 dB SPL sensitivity; 125 dB maximum SPL
• 1.5" high-frequency titanium compression driver
• Durable composite construction with innovative
hi/lo grip design for easy pole mounting
• Patented split-baffle design for
superior drive time alignment
• 1000 W Class-D amplifier
• 126 dB maximum SPL
• 50 Hz – 20 kHz frequency range
PORTABLE PA
LOUDSPEAKERS
• 12" woofer for low-end punch in a compact enclosure
• 1.5" high-frequency titanium compression driver
• Durable composite construction with innovative
hi/lo grip design for easy pole mounting
• Patented split-baffle design for
superior drive time alignment
• 55 Hz – 20 kHz frequency range
15" TWO-WAY POWERED LOUDSPEAKER
• Crisp clean highs and tight, deep lows for larger spaces
• 15" woofer for extended low frequency response
• LCD display and one-knob DSP control
with presets for precise, speedy set up
• Input level meters and independent amplifier
control to ensure optimal gain structure
• Front LED for "power on" and "limit" indication
• 1.5" high-frequency titanium compression driver
• Durable composite construction with innovative
hi/lo grip design for easy pole mounting
• Patented split-baffle design for
superior drive time alignment
• 1000 W Class-D amplifier
• 127 dB maximum SPL
• 42 Hz – 20 kHz frequency range
See page 50 for ZLX Covers.
ZLX-12P
ZLX-15P
ZLX-12
ZLX-15
Speaker Type
Two-way, powered
Two-way, powered
Two-way, passive
Two-way, passive
Frequency Response
65 Hz – 18 kHz1
55 Hz – 18 kHz1
82 Hz – 18 kHz2
56 Hz – 18 kHz2
Frequency Range
50 Hz – 20 kHz1
42 Hz – 20 kHz1
55 Hz – 20 kHz
44 Hz – 20 kHz
95 dB
96 dB
125 dB
126 dB
Recommended High-pass Frequency
40 Hz
40 Hz
Power Handling
(Continuous, Peak)
250 W Continuous
1000 W Peak
250 W Continuous
1000 W Peak
90° x 60°
90° x 60°
Axial Sensitivity
Max. Measured SPL
LCD DISPLAY AND SINGLE-KNOB DSP CONTROL
126 dB
127 dB
Coverage (H x V)
90° x 60°
90° x 60°
Power Rating
1000 W
1000 W
LF Transducer
12" EVS-12K woofer
15" EVS-15L woofer
12" EVS-12K woofer
15" EVS-15L woofer
HF Transducer
DH-1K
DH-1K
DH-1K
DH-1K
VISUAL CONTROL AND MONITORING WITH PRESETS
Crossover Frequency
2.1 kHz
1.7 kHz
In the case of the ZLX's uncluttered control panel, less really does mean more. Though
the multiple dials and switches on other powered loudspeakers may suggest more
functionality, ZLX's powerful DSP engine is accessed by a clean single-knob design
with LCD display, and actually offers the most precise control and configuration available
at its price point. Use the presets to optimize ZLX according to your application (music,
live, speech, club) and your location (pole mount, monitor, install) and hear the difference
in seconds. Smart design, straightforward operation.
Nominal Impedance
8Ω
8Ω
Minimum Impedance
7Ω
7Ω
Dual NL4
Dual NL4
46
CONCERT
ZLX-12
Connectors
Two XLR/TRS combo jack, one 3.5 mm Input and one XLR link output
Enclosure Material
Polypropylene
Polypropylene
Polypropylene
Polypropylene
Grille
18 ga steel with black powder coat
18 ga steel with black powder coat
18 ga steel with black powder coat
18 ga steel with black powder coat
Dimensions (H x W x D)
24" x 14" x 14"
(610 x 356 x 356 mm)
27" x 17" x 15"
(685 x 423 x 383 mm)
24" x 14" x 14"
(610 x 356 x 356 mm)
27" x 17" x 15"
(685 x 423 x 383 mm)
Net Weight
34.3 lb (15.6 kg)
38.0 lb (17.3 kg)
32.8 lb (14.9 kg)
36.5 lb (16.6 kg)
Using MUSIC DSP preset.
2
Full Space Measurement, will have low frequency extension when mount on floor or wall.
1
47
Rigging and Accessories
RIGGING AND ACCESSORIES
XLC215 and XLD
XLC CONCERT/PORTABLE RIGGING
XLCi INSTALL RIGGING
B-1 Grid for XLC
B-2 Grid for XLCi
B-1 GRID + XLC215 + AGCD + XLD LOUDSPEAKER
LOUDSPEAKERS
LOUDSPEAKERS
XLC Grid
CONCERT
CONCERT
XLC Series
Loudspeaker
XLC Button Bar
(Set of 2)
(other rigging hardware included with speaker)
(other rigging hardware included with speaker)
INSTALL
INSTALL
XLC Swing Arm
(Set of 2)
AGCD
Adapter Grid
XLC and XLVC
GROUND STACK KITS
XGS-4
Xi-1082 UNDER BALCONY/ON-WALL MOUNT
FRi-2082 UNDER BALCONY/ON-WALL MOUNT
PORTABLE PA
PORTABLE PA
XGS-3
XLD Series
Loudspeaker
XLD281 XLD281 + CBEAM
XLD281
Coupler Beam
XLD281 + DOLLY
XLD/XS Dolly (Cover)
Sample Column
of (4) XLD281s
XLD/XS Dolly (Base)
(One half of dolly shown in drawing)
XLD281
Enclosures
Front View
48
MB-1082: black
Side View
on-wall
The 100° x 100°
dispersion angle allows
the FRi-2082 to be
installed vertically on the
wall as well. Mounting
bracket comes with
FRi-2082.
49
Rigging and Accessories
Rigging and Accessories
EV INNOVATION ACCESSORIES
ACCESS CARD
EVU-TK60
TRANSFORMER KIT
LOUDSPEAKERS
EV Innovation Access Card
lets you test EVA, EVF or EVH
transducers and protection
circuitry without disassembling
the cabinet.
TK-150
TRANSFORMER KIT
60-Watt, 70.7/100-Volt input
transformer for EVU systems,
with multiple taps.
EVU-CDNL4
COVER PLATE KIT
(HRK not shown)
EVA, EVF AND EVH
INSTALL
GLAND NUT COVER PLATES
INSTALL
VRK-2
EVI
PORTABLE PA
EVI Series
EBK-1 (EYEBOLT KIT)
RECOMMENDED
LOCATION
EVI-12
"U" STYLE BRACKET
Contains three 3/8-16
forged shoulder bolts.
CDG
Dual gland nut cover plate
PORTABLE PA
VRK-1
HRK AND VRK RIGGING KITS
Dual NL4 cover plate for EVU
series only.
EVI-12MBB: black
EVI-12MBW: white
LOCATION NOT
RECOMMENDED
CONCERT
70/100 V transformer kit for EVF
and EVH.
EVF and EVH Series
LOUDSPEAKERS
EVI-AC
CONCERT
EV INNOVATION
REQUIRED
LOCATION
EVI-15
"U" STYLE BRACKET
EVI-28
"U" STYLE BRACKET
35º MAX
EVI-28MBB: black
EVI-28MBW: white
EVI-15MBB: black
EVI-15MBW: white
35º MAX
EVA Rigging
EVA modules connect with an integrated internal top-to-bottom metal structure. Hidden by
cover panels, this nearly invisible rigging system gives an EVA cluster the aesthetic appeal of an
architectural element rather than a loudspeaker system. The rigging system is designed to carry an
array with a safety factor of greater than 8:1.
The radius of action is 140°.
CDNL4
Dual NL4 cover plate
EVID
EVID 3.2, EVID 4.2 or EVID 6.2 + AB-ZE
EVA-SG2 (Standard Grid)
EVA-EG2 (Extended Grid)
For typical tilt angles in 3 and
4 module arrays and pull-up
applications in large arrays when
extreme angles are required.
Includes one spreader bar.
For typical tilt angles in arrays
taller than four modules, or
extreme angles in arrays of four
modules or less. Includes one
spreader bar.
50
EVA-CG (Coupler Grid,
not shown)
Connects full-range modules
and single 15" subwoofers
so that you can fly the subs
without increasing trim height.
CSG
Single gland nut cover plate
51
Rigging and Accessories
S-40
Rigging and Accessories
ZX1
WALL, CEILING OR STAND MOUNT
S-40 MB/B: black
S-40 MB/W: white
ZX1 + TCA-ZX1
ZX1i + AB-ZE
ZX1 + MP1-B
CONCERT
1)
2)
1) MB 100
2) MB 100 + MB 200
Sx300
MB 300 B
Array-kit (2 plates)
black
Security advice:
When flown by 90° (figure 2),
do not use eyebolts only!
SB122
MB 300 W
Array-kit (2 plates)
white
CONCERT
Sx300 and SB122
ZX3 and ZX5
INSTALL
Horizontal Cluster 120° (2 systems)
2 x MB 200 + 1 x MB 300 neccessary
MB3 or MB5 WALL/CEILING MOUNT BRACKET
CB5
CLUSTER BRACKET KIT
VSA-1
EBK-3
FORGED M8 EYEBOLT KIT
HA-3 or HA-5
HANDLE MOUNT ADAPTER
INSTALL
LOUDSPEAKERS
LOUDSPEAKERS
Note: The thread diameter can be reduced
with a standard 5/8" screw adapter for
different mic stands.
PORTABLE PA
PORTABLE PA
Horizontal Cluster 180° (3 systems)
3 x MB 200 + 2 x MB 300 neccessary
Wall or Ceiling-Mount
1 x MB 200 neccessary
Live X, ZLX and ZXA1 Covers
Each cover is custom fit with access to the speaker handles
3/8" quick links
neccessary
Eyebolt
neccessary
Vertical Cluster
2 x MB 200 neccessary
ZLX-BRK
ZLX WALL MOUNT BRACKET
VERTICAL STRONG-ARM MOUNT
VSA-1 using TSA-1
For all models
SSK-1
SINGLE-STUD RIGGING KIT
Handle adapter
to be used with VSA-1
52
Bracket sold separately
53
Tour Grade Amplifiers
RCM-26
IRIS-NET REMOTE CONTROL MODULE FOR TOUR GRADE AMPLIFIERS
• Extend Tour Grade performance with
powerful DSP functionality
• Advanced FIR-Drive loudspeaker optimization
• High precision load impedance supervision
• Two GPI and two GPO ports
Designed for the most demanding applications in both
touring and installed sound, EV's ultra-reliable Tour Grade
amplifiers offer a unique combination of output power,
sonic excellence and high efficiency, all in a compact,
lightweight format that's ideal for life on the road. Based
on grounded-bridge Class-H topology, Tour Grade amps
feature an integrated switch-mode power supply for
maximum power per pound, with plenty of headroom to
High-level touring performance
Rugged, lightweight package
2000 W per channel (2 Ω)
Grounded-bridge Class-H design
Switch-mode power supply
Microprocessor-controlled
• Front LCD panel for operationmode setup and monitoring
• Slot for optional RCM-26 or RCM-28 IRISNet-compatible DSP and control module
• 11-level protection package
• Only 31.4 lb (14.2 kg)
3500 W PER CHANNEL POWER AMPLIFIER
•
•
•
•
•
•
High-power performance for top-level tours
Rugged, lightweight package
3500 W per channel (2 Ω)
Grounded-bridge Class-H design
Switch-mode power supply
Microprocessor-controlled
• Front LCD panel for operationmode setup and monitoring
• Slot for optional RCM-26 or RCM-28 IRISNet-compatible DSP and control module
• 11-level protection package
• Only 32 lb (14.5 kg)
TG5 and TG7 rear view
ELECTRONICS
UCC1
REMOTE CONTROL INTERFACE FOR IRIS-NET
•
•
•
•
54
IRIS-NET REMOTE CONTROL MODULE FOR TOUR GRADE AMPLIFIERS
•
•
•
•
•
OMNEO Media Networking Architecture
Advanced FIR-Drive loudspeaker optimization
High precision load impedance supervision
Two GPI and two GPO ports
One-button system test for fast, complete
check of connected cables and components
• Pilot tone detection for cable supervision
• Dedicated Array EQ and Delay DSP
• Recallable DSP/configuration presets
2000 W PER CHANNEL POWER AMPLIFIER
•
•
•
•
•
•
TG7
RCM-28
USB-CAN converter for IRIS-Net enabled devices
Supports up to 100 CAN devices
Parallel CAN connections on RJ-45 Ethercons
USB-powered
TG5
TG7
Topology
Class-H grounded bridge
Class-H grounded bridge
Impedance
2Ω
8Ω
2Ω
4Ω
8Ω
Continuous Output/Channel (1 kHz, THD 1%) 2000 W 1450 W
4Ω
850 W
3500 W
2500 W
1500 W
Continuous Output/Channel
(20–20,000 Hz, THD < 0.2%)
1200 W
600 W
2100 W
1050 W
Maximum Bridged Output: 4, 8 Ω
3800 W 2900 W
7000 W
5000 W
RCM-26
RCM-28
Amplifier Gain (Selectable)
39, 35 or 32 dB
41.5, 35 or 32 dB
Signal-to-Noise Ratio (A-weighted)
109 dB
111 dB
116 dB
120 dB
Total Harmonic Distortion
0.05%
0.05%
<0.005% (THD+Noise)
<0.002% (THD+Noise)
Intermodulation Distortion (SMPTE)
0.05%
0.05%
DIM 30
0.02%
0.02%
Slew Rate
30 V/µs
35 V/µs
Analog Inputs
Yes
Yes
Input Impedance (Balanced)
20 kΩ
20 kΩ
0, +6, +9 dBu
2 audio inputs on internal slot connector, pre-/post-fader selectable
Input Sensitivity (Selectable)
0, +6, +7 dBu
Digital Inputs
Optional (RCM-26 / RCM-28) Optional (RCM-26 / RCM-28)
A/D Conversion
See RCM-26 / RCM-28
See RCM-26 / RCM-28
D/A Conversion
See RCM-26 / RCM-28
See RCM-26 / RCM-28
24 Bit linear, Sigma-Delta, 128x oversampling
Data Format
See RCM-26 / RCM-28
See RCM-26 / RCM-28
24 Bit linear A/D and D/A conversion, 48 Bit processing
Internal Processing
See RCM-26 / RCM-28
See RCM-26 / RCM-28
2 DSPs (150 MHz, 300 MIPS)
Dual Core DSP, 500 MIPS
Sample Rate
See RCM-26 / RCM-28
See RCM-26 / RCM-28
48 kHz
48 kHz
Sample Rate Conversion (SRC)
See RCM-26 / RCM-28
See RCM-26 / RCM-28
AES3 (AES/EBU) format, XLR In/Thru connectors
24 Bit linear, Sigma-Delta, 128x oversampling
32 kHz – 192 kHz internal sample rate converter
Network Control (IRIS-Net)
Optional (RCM-26 / RCM-28) Optional (RCM-26 / RCM-28) Yes
IRIS-Net control/OMNEO
Control Protocol
See RCM-26 / RCM-28
See RCM-26 / RCM-28
CAN Bus
OMNEO/OCA
CAN Bus Interface
See RCM-26 / RCM-28
See RCM-26 / RCM-28
10–500 kbaud, 2x RJ-45 (IRIS-Net Control)
GPIO Control Port
See RCM-26 / RCM-28
See RCM-26 / RCM-28
FIR-Drive
Optional (RCM-26 / RCM-28) Optional (RCM-26 / RCM-28) Yes
Power Supply
100–240 V, 50-60 Hz
Not required because of OCA support
1 x 6-pole Euroblock, 2 control inputs, 2 control outputs, (+5 V, 200 mA /GND)
ELECTRONICS
TG5
handle transient peaks and low loads. The optional RCM26 remote control module adds state-of-the-art IRISNet-controlled DSP, including FIR-Drive loudspeaker
optimization, IIR filters, signal routing, level control,
dynamics and system supervision. The optional RCM-28
module provides additional DSP options as well as the
revolutionary OMNEO Media Networking Architecture for
the most demanding applications.
• One-button system test for fast, complete
check of connected cables and components
• Pilot tone detection for cable supervision
• Six recallable DSP/configuration presets
• Parallel RJ-45 CAN bus connectors
Yes
100–240 V, 50-60 Hz
Power Consumption 1/8 max. output @ 4 Ω
1000 W
1450 W
Dimensions (H x W x D)
3.47" x 19" x 20.16"
(88.1 x 482.6 x 512 mm)
3.47" x 19" x 20.16"
(88.1 x 482.6 x 512 mm)
3.33" x 3.17" x 9.06"
(84.7 x 80.4 x 230.3 mm)
3.33" x 3.17" x 9.06"
(84.7 x 80.4 x 230.3 mm)
Net Weight
31.4 lb (14.2 kg)
32 lb (14.5 kg)
0.53 lb (240 g)
0.53 lb (240 g)
• XLR jack for audio bus monitoring
• 19" rackmount panel included
• Status LED shows CAN activity and device status
55
Q Series Amplifiers
Building on a legacy of power and performance,
Q Series amps take Electro-Voice’s unique amplifier
philosophy to a new level of efficiency and value. The
Q series achieves superb audio performance because
it's designed for superior dynamic headroom and transient
response, resulting in 30% greater output capability for
short-duration signals. High-power Q99 and Q1212
models use sophisticated Class-H topology that
dramatically reduces heat and cuts energy consumption
by up to 50%, yielding racks that are easier to power and
650 W PER CHANNEL POWER AMPLIFIER
• Outstanding value and performance
for club and mobile systems
• Dynamic headroom for all real-world applications
• 650 W per channel (2 Ω)
• Class-AB design
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
Q66
Q1212
1800 W PER CHANNEL CLASS-H POWER AMPLIFIER
•
•
•
•
•
•
900 W PER CHANNEL POWER AMPLIFIER
• Outstanding value and performance
for clubs, mobile and more
• Dynamic headroom for all real-world applications
• 900 W per channel (2 Ω)
• Class-AB design
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
Q99
• Switchable LPN filter for extra tonal
fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
• Switchable LPN filter for extra tonal
fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
1250 W PER CHANNEL CLASS-H POWER AMPLIFIER
ELECTRONICS
•
•
•
•
•
•
High-efficiency power and performance
Innovative Class-H design
1250 W per channel (2 Ω)
Dynamic headroom for all real-world applications
XLR pass-though input connections
Easy connection to biamped loudspeakers
• Switchable LPN filter for extra tonal
fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
Super-efficient power with outstanding performance
Innovative Class-H design
1800 W per channel (2 Ω)
Dynamic headroom for all real-world applications
XLR pass-though input connections
Easy connection to biamped loudspeakers
Q44
Q66
Q99
Topology
Class-AB
Class-AB
Class-H
Impedance
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
Continuous Output Power(1 kHz, THD 1%)
650 W
450 W
270 W
900 W
600 W
380 W
1250 W
900 W
550 W
1800 W
1200 W
750 W
400 W
200 W
500 W
250 W
800 W
400 W
1100 W
550 W
1300 W
900 W
1800 W
1200 W
2800 W
1800 W
3600 W
2400 W
Continuous Output Power(20 - 20,000 Hz, THD
< 0.2%)
Maximum Bridged Output
56
Q1212
Class-H
Amplifier Gain
32 dB
32 dB
32 dB
32 dB
Frequency Response
10 Hz – 40 kHz (±1 dB)
10 Hz – 40 kHz (±1 dB)
10 Hz – 40 kHz (±1 dB)
10 Hz – 40 kHz (±1 dB)
Signal-to-Noise Ratio (A-weighted)
106 dB
107 dB
109 dB
110 dB
Total Harmonic Distortion
0.03%
0.03%
0.03%
0.03%
Intermodulation Distortion (SMPTE)
0.1%
0.1%
0.1%
0.1%
DIM 30
0.05%
0.05%
0.05%
0.05%
Input Impedance (Balanced)
20 kΩ
20 kΩ
20 kΩ
20 kΩ
Input Sensitivity
+2.2 dBu
+3.1 dBu
+5.1 dBu
+6.6 dBu
Maximum Input Voltage
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
Slew Rate
25 V/µs
26 V/µs
27 V/µs
30 V/µs
Network Control (IRIS-Net)
No
No
No
No
Protections
Q44, Q66, Q99 and
Q1212 rear view
• Switchable LPN filter for extra tonal
fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
ELECTRONICS
Q44
easier to cool. Smaller Q44 and Q66 models are based
on the proven Class-AB designs of EV’s referencestandard Precision series. All models incorporate dynamic
limiting to prevent dangerous output clipping, as well as
extensive protections against thermal damage and electrical
malfunction. Combining Class-H innovation with Class-AB
sonic excellence and robustness, the compact, affordable
Q Series is the ideal amplifier line for all sizes of clubs,
concerts, performance centers and sports venues.
Audio limiters, high temperature, DC, HF, back EMF, peak current limiters, inrush current limiters, turn-on delay
Cooling
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Dimensions (H x W x D)
3.47" x 19.02" x 16.63"
(88.1 x 483 x 421.5 mm)
3.47" x 19.02" x 16.59"
(88.1 x 483 x 421.5 mm)
3.47" x 19.02" x 16.59"
(88.1 x 483 x 421.5 mm)
3.47" x 19.02" x 16.59"
(88.1 x 483 x 421.5 mm)
Net Weight
27.78 lb (12.6 kg)
32.63 lb (14.8 kg)
35.94 lb (16.3 kg)
39.02 lb (17.7 kg)
57
CPS Contractor Precision Series Amplifiers
CPS 2.4, CPS 2.6,
CPS 2.9 and CPS.12
rear view
Contractor Precision Series amplifiers combine top-quality
performance and reliability with innovative designs
perfectly tailored to the needs of professional sound
installation. Available in 2RU configurations of up to eight
channels, CPS amps are compact and efficient to operate,
with every detail thought through from the contractor's
point of view. For fast installation and setup, each model
features Phoenix-type input and output connectors,
programmable power-on delay, remote power-on/off,
rear-mounted attenuators and switchable high-pass filters.
UNIQUE FLEXIBILITY THROUGH VLD
The ability to switch individually the mode of each power
amp channel helps the DSA multi-channel power amplifiers
to achieve a degree of flexibility never before possible. In low
impedance operation (2 Ω, 4 Ω, 8 Ω), each channel can drive
up to four 8 Ω loudspeaker cabinets. The output channels
can also be paired in bridged mode. Depending upon the
application, each channel can be switched individually even in
high-impedance (Hi-Z) mode in order to drive 70 Vrms or 100
Vrms loudspeaker lines directly without an output transformer
(Direct Drive). The power output by the DSA multi-channel
power amplifiers is (along with its thermal capacity) limited
only by their maximum output voltage and maximum output
current, which means they can drive any load between 2 and
10 Ω with their rated maximum outputs of 500 W and 1000 W
respectively per channel.
CPS 2.4
For worry-free dependability, there's full protection against
hazards, such as excessive heat, overloads, shorts, HF,
DC, back EMF and inrush current. And for the ultimate
in system control and supervision, the optional RCM-810
module enables the inclusion of CPS amps in IRIS-Net
networks of up to 250 devices. Offering exceptional ease,
flexibility and audio performance, CPS series is the ideal
installation solution for cinema, club sound, commercial
sound/life safety, and performance and sports venues.
Power and efficiency for installations
Innovative Class-H design
1250 W per channel (2 Ω)
Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
CPS 2.12
•
•
•
•
Power and efficiency for installations
Innovative Class-H design
1800 W per channel (2 Ω)
Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
Four channels in one compact rack-efficient unit
1000 W per channel
70/100 V operation for distributed systems
Class-D design for optimum efficiency
Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• IRIS-Net selection of each channel's
impedance (2–10 Ω in 0.1 Ω steps)
650 W PER CHANNEL POWER AMPLIFIER
ELECTRONICS
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
CPS 8.5
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
Eight channels in one compact rack-efficient unit
500 W per channel
70/100 V operation for distributed systems
Class-D design for optimum efficiency
Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• IRIS-Net selection of each channel's
impedance (2–10 Ω in 0.1 Ω steps)
RCM-810
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• Front-to-rear fans
500 W PER CHANNEL 8-CHANNEL AMPLIFIER
•
•
•
•
•
900 W PER CHANNEL POWER AMPLIFIER
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• Front-to-rear fans
1000 W PER CHANNEL 4-CHANNEL AMPLIFIER
•
•
•
•
•
A corresponding encoder-circuit is provided on the rear panel. In addition, through VLD (Variable Load
Drive) in combination with a RCM-810 remote control module, it is possible to define freely which output
power should be made available at which load in the frame described above in the channel in question:
e.g. Channel A = 350 W into 2.6 Ω; Channel B = 500 W into 8 Ω, etc.
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
500 W PER CHANNEL 4-CHANNEL AMPLIFIER
Four channels in one compact rack-efficient unit
500 W per channel
70/100 V operation for distributed systems
Class-D design for optimum efficiency
Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• IRIS-Net selection of each channel's
impedance (2–10 Ω in 0.1 Ω steps)
CPS 4.10
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
1800 W PER CHANNEL CLASS-H POWER AMPLIFIER
•
•
•
•
•
• Contractor-friendly performance and reliability
• 900 W per channel (2 Ω)
• Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
• Class-AB design
58
•
•
•
•
CPS 4.5
• Contractor-friendly performance and reliability
• 650 W per channel (2 Ω)
• Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
• Class-AB design
CPS 2.6
1250 W PER CHANNEL CLASS-H POWER AMPLIFIER
ELECTRONICS
CPS 2.9
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• Front-to-rear fans
IRIS-NET REMOTE CONTROL MODULE FOR CPS SERIES AMPLIFIERS
• Enable powerful control and supervision capabilities
• Integrate up to 100 devices in each remote
control network, 250 with multiple networks
• Support for 2-, 4- and 8-channel CPS models
• Freely programmable control inputs and outputs
• Load-monitoring for each channel
• Variable Load Drive for independent
channel impedance on 4- and 8-channel
amps (2–10 Ω in 0.1 Ω steps)
59
CPS Contractor Precision Series Amplifiers
CPS 2.6
CPS 2.9
CPS 2.12
Class-AB
Class-AB
Class-H
Class-H
Impedance
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
Continuous Output Power(1 kHz, THD 1%) 650 W
450 W
270 W
900 W
600 W
380 W
1250 W
900 W
550 W
1800 W
1200 W
750 W
Continuous Output Power(20–20,000 Hz,
THD<0,2%)
400 W
200 W
500 W
250 W
800 W
400 W
1100 W
550 W
1300 W
900 W
1800 W
1200 W
2800 W
1800 W
3600 W
2400 W
Maximum Bridged Output
Amplifier Gain
32 dB
32 dB
32 dB
32 dB
Frequency Response
10 Hz – 40 kHz (±1 dB)
10 Hz – 40 kHz (±1 dB)
10 Hz – 40 kHz (±1 dB)
10 Hz – 40 kHz (±1 dB)
Total Harmonic Distortion
0.03%
0.03%
0.03%
0.03%
Intermodulation Distortion (SMPTE)
0.1%
0.05%
0.1%
0.1%
DIM 30
0.05%
0.02%
0.05%
0.05%
Slew Rate
25 V/µs
26 V/µs
27 V/µs
30 V/µs
Analog Inputs
2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type
Input Impedance (Balanced)
20 kΩ
20 kΩ
20 kΩ
20 kΩ
Input Sensitivity
2.2 dBu (1.0 V)
+3.1 dBu (1.11 Vrms)
+5.1 dBu (1.39 Vrms)
+6.6 dBu (1.66 Vrms)
Maximum Input Voltage
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
Crossover Type
Optional Modules
Optional Modules
Modular
Modular
Network Control (IRIS-Net)
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
CAN Bus Interface
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
Variable Load Drive (VLD)
No
No
No
No
Cooling
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Front-to-rear, 3-stage fans
Dimensions (H x W x D)
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
Net Weight
27.8 lb (12.6 kg)
32.63 lb (14.8 kg)
35.94 lb (16.3 kg)
39.0 lb (17.7 kg)
CPS 4.5
CPS 4.10
CP3000S
Class-D
Impedance/Voltage
2Ω
4Ω
8Ω
8 Ω VLD 70V/100V 2 Ω
Class-D
4Ω
8Ω
8 Ω VLD 70V/100V 2 Ω
4Ω
8Ω
8 Ω VLD 70V/100V
Continuous Power/Channel (1 kHz, THD 1%)
500 W
500 W
250 W
500 W
500 W
1000 W
1000 W
500 W
1000 W
1000 W
500 W
500 W
250 W
500 W
500 W
Continuous Power/Channel (20-20,000
Hz, THD < 0.3%)
450 W
450 W
225 W
450 W
450 W
900 W
900 W
450 W
900 W
900 W
450 W
450 W
225 W
450 W
450 W
1000 W
1000 W
2000 W
2000 W
1000 W
1000 W
1000 W
Class-D
2000 W
32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V)
32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V)
32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V)
Frequency Response
15 Hz – 30 kHz
15 Hz – 30 kHz
15 Hz – 30 kHz
Signal-to-Noise Ratio, A-weighted (4 Ω)
100 dB
103 dB
100 dB
Total Harmonic Distortion
0.05%
0.05%
0.05%
Intermodulation Distortion (SMPTE)
0.05%
0.05%
DIM 30
0.02%
0.02%
0.02%
Slew Rate
28 V/µs
28 V/µs
28 V/µs
Analog Inputs
4, electronically balanced, Phoenix-type
4, electronically balanced, Phoenix-type
8, electronically balanced, Phoenix-type
Input Impedance (Balanced)
20 kΩ
20 kΩ
20 kΩ
Input Sensitivity
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
Maximum Input Voltage
+22 (9.76 Vrms)
+22 (9.76 Vrms)
+22 (9.76 Vrms)
Network Control (IRIS-Net)
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
CAN Bus Interface
Optional (RCM-810 card)
Optional (RCM-810 card)
Optional (RCM-810 card)
Variable Load Drive (VLD)
Yes
Yes
Yes
Cooling
Front-to-rear, continuously variable fans
Front-to-rear, continuously variable fans
Front-to-rear, continuously variable fans
Dimensions (H x W x D)
3.47" x 19" x 16.59" (88.1 x 482.6 x 421.5 mm)
3.47" x 19" x 16.59" (88.1 x 482.6 x 421.5 mm)
3.47" x 19" x 16.59" (88.1 x 482.6 x 421.5 mm)
Net Weight
24.47 lb (11.1 kg)
24.47 lb (11.1 kg)
30.64 lb (13.9 kg)
ELECTRONICS
CPS 4.5 and CPS 4.10 rear view
60
Advanced high-efficiency Class-H design
Ideal for demanding concerts and tours
Exceptional dynamic headroom
Rugged, compact and lightweight
1600 W per channel (2 Ω)
XLR pass-though input connections
•
•
•
•
Easy connection to biamped loudspeakers
Switch mode power supply
Built-in dynamic limiters
Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• 3-stage front-to-rear fans
1000 W
Amplifier Gain
CPS 8.5 rear view
consumption for enhanced energy efficiency. A complete
set of protection circuitry guards people and equipment
against hazardous conditions, and a rigid, robust chassis,
built to the highest precision manufacturing standards,
ensures dependable operation on even the most grueling
tours. With exceptionally clean power and tour-friendly
touches that facilitate fast, flexible setup, Compact
Precision amplifiers fulfill even the most demanding
requirements of pro audio touring.
1600 W PER CHANNEL CLASS-H POWER AMPLIFIER
•
•
•
•
•
•
CPS 8.5
Topology
Maximum Bridged Output
Compact Precision amplifiers combine outstanding audio
performance with the highest-possible reliability and
safety to create an ideal high-power solution for touring
and rentals. Incorporating an innovative switchmode
power supply into Class-H technology, the CP series
delivers clean headroom that is far above stated nominal
output. This advanced design also results in improved
performance-to-weight ratio for easier touring, reduced
waste heat for closer rack spacing and reduced power
CP4000S
2100 W PER CHANNEL CLASS-H POWER AMPLIFIER
•
•
•
•
•
•
High power with advanced Class-H efficiency
Ideal for demanding concerts and tours
Exceptional dynamic headroom
Rugged, compact and lightweight
2100 W per channel (2 Ω)
XLR pass-though input connections
•
•
•
•
Easy connection to biamped loudspeakers
Switch mode power supply
Built-in dynamic limiters
Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• 3-stage front-to-rear fans
CP3000S
CP4000S
Topology
Class-H
Class-H
Impedance
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
Maximum power (1k Hz; THD <1%)
1600 W
1100 W
600 W
2100 W
1500 W
900 W
Rated power (20 Hz–20,000 Hz; THD < 0.2%)
900 W
450 W
1200 W
600 W
Maximum bridged output (1,000 Hz; < 1% THD)
3200 W
2200 W
4200 W
3000 W
Frequency Response (-1dB, ref. 1kHz)
15 Hz – 40 kHz
15 Hz – 40 kHz
Signal-to-noise ratio, A-weighted
107 dB
108 dB
Total harmonic distortion
<0.05%
<0.05%
Intermodulation distortion (SMPTE)
<0.02%
<0.02%
Slew rate
35 V/µs
35 V/µs
Input impedance (balanced)
20 kΩ
20 kΩ
Crosstalk (at 1,000 Hz)
<-80 dB
<-80 dB
Dimensions (W x H x D)
19.02" x 3.47" x 15.12" (483 x 88.1 x 384 mm)
19.02" x 3.47" x 15.12" (483 x 88.1 x 384 mm)
Net weight
17.97 lb (8.15 kg)
19.18 lb (8.70 kg)
ELECTRONICS
CPS 2.4
Topology
CP3000S and
CP4000S rear view
61
PA Series Commercial Power Amplifiers
PA4150L
QUAD 150 W PER CHANNEL POWER AMPLIFIER
•
•
•
•
•
•
The PA Series of commercial power amplifiers is a
favorite of installers everywhere for sound reinforcement,
background music, paging and public address systems.
Featuring low-distortion amplifier electronics that are
bridgeable for flexible power allocation, PA Series amps
provide a wide dynamic range with excellent headroom.
An onboard limiter spares both amplifier and speakers
from damaging transients, and a comprehensive
thermal/electrical protection package ensures long-haul
dependability. Equipped with Phoenix-style terminals for
PA2250T
ELECTRONICS
62
PA1250T
PA2250T
PA2400T
PA2450L
PA4150L
1
2
2
2
4
Signal-to-Noise Ratio, A-weighted
103 dB
103 dB
Impedance/Voltage
70 V/100 V
4Ω
8Ω
70 V/100 V
103 dB
4Ω
8Ω
70 V/100 V
4Ω
104 dB
8Ω
4Ω
8Ω
Rated output power
(*rated load) THD <1%, 1 kHz
270 W
270 W
135 W
270 W
430 W
215 W
430 W
450 W
220 W
160 W
100 W
Rated output power (*rated load) THD
<0.2%, 20 Hz – 20 kHz
250 W
250 W
125 W
250 W
400 W
200 W
400 W
400 W
200 W
150 W
75 W
Slew rate (V/µs) at 1 kHz
41/61
18
18
41/61
25
25
46/65
28
28
16
16
Frequency response -1 dB, ref. 1 kHz
65 Hz – 20 kHz
65 Hz – 40 kHz
THD @ rated output power
MBW=80 kHz, 1 kHz
<0.1%
<0.1%
<0.1%
<0.1%
<0.1%
IMD-SMPTE 60 Hz, 7 kHz
<0.1%
<0.1%
<0.1%
<0.1%
<0.1%
65 Hz – 40 kHz
101 dB
<10 Hz – 40 kHz
<10 Hz – 40 kHz
<0.1%
<0.1%
<0.1%
<0.1%
<0.1%
Input impedance, 20–20,000 Hz
>20 kΩ balanced
>20 kΩ
>20 kΩ
>20 kΩ
>20 kΩ
SINGLE-CHANNEL 250 W POWER AMPLIFIER
Input sensitivity @ rated output
power or voltage, 1 kHz
0 dBu (775 mV)
0 dBu (775 mV)
0 dBu (775 mV)
0 dBu (775 mV)
0 dBu (775 mV)
• Cool-running, saturation-free power
for distributed installations
• Ideal for sound reinforcement,
paging and life safety
• 250 W mono for 70 V/100 V lines
• Compact 2RU design
• Stepped rear-panel level attenuation
Crosstalk ref. 1 kHz, @ 10% rated
output power
<-75 dB
<-75 dB
<-75 dB
<-75 dB
<-75 dB
Dimensions (W x H x D)
19" x 3.5" x 16"
19" x 3.5" x 16"
(483 x 88 x 406 mm) (483 x 88 x 406 mm)
19" x 3.5" x 16"
(483 x 88 x 406 mm)
19" x 3.5" x 16"
(483 x 88 x 406 mm)
19" x 3.5" x 16"
(483 x 88 x 406 mm)
Net Weight
36.34 lb (16.5 kg)
57.27 lb (26 kg)
36.34 lb (16.5 kg)
39.65 lb (18 kg)
•
•
•
•
•
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
3-stage front-to-rear fans
Integrated rack ears for direct mounting
DUAL 270 W PER CHANNEL POWER AMPLIFIER
•
•
•
•
•
•
51.76 lb (23.5 kg)
PA1250T rear view
Stepped rear-panel level attenuation
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
3-stage front-to-rear fans
Integrated rack ears for direct mounting
PA2250T and PA2400T rear view
DUAL 400 W PER CHANNEL POWER AMPLIFIER
• Efficient performance for low
impedance or distributed systems
• Ideal for sound reinforcement,
paging and life safety
• 400 W per channel for 4 Ω or 70 V/100 V lines
• Bridged mono out for 860 W into 8 Ω
• Compact 2RU design
PA2450L
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
3-stage front-to-rear fans
Integrated rack ears for direct mounting
DIM30 3.15 kHz, 1 5kHz
• Efficient performance for low
impedance or distributed systems
• Ideal for sound reinforcement,
paging and life safety
• 250 W per channel for 4 Ω or 70 V/100 V lines
• Bridged mono out for 540 W into 8 Ω
• Compact 2RU design
PA2400T
Number of Channels
•
•
•
•
•
•
•
•
•
•
•
Stepped rear-panel level attenuation
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
3-stage front-to-rear fans
Integrated rack ears for direct mounting
ELECTRONICS
PA1250T
fast, easy hookup, PA Series amps are housed in compact,
rack-ready 2RU chassis with ample internal airflow and
exceptionally quiet multi-stage fans. Models are available
in a variety of output powers and channel configurations,
several of which provide 70 V/100 V output using lowdistortion transformers. Offering outstanding versatility and
long-term reliability, the PA Series is a remarkable value for
any installation application.
Flexible multi-channel power for installation
Ideal for sound reinforcement, paging and life safety
150 W per channel into 4 Ω
Bridged mode for dual 315 W outputs into 8 Ω
Compact 2RU design
Stepped rear-panel level attenuation
PA2450L rear view
DUAL 450 W PER CHANNEL POWER AMPLIFIER
• Reliable high-quality power for installation
• Ideal for sound reinforcement,
paging and life safety
• 450 W per channel for 4 Ω or 70 V/100 V lines
• Bridged mono out for 900 W into 8 Ω
• Compact 2RU design
• Stepped rear-panel level attenuation
•
•
•
•
•
Selectable 50 Hz or 300 Hz high-pass filter
Thermal protection, peak limiting, turn-on delay
Phoenix-type inputs and outputs
3-stage front-to-rear fans
Integrated rack ears for direct mounting
PA4150L rear view
63
NetMax Digital Matrix System
MI-1
NETMAX 8-CHANNEL ANALOG MIC/LINE INPUT CARD
•
•
•
•
DI-1
The NetMax N8000 System Controller is a state-of-the-art
digital matrix system offering comprehensive management
of all aspects of professional sound reinforcement systems.
Supporting both distributed and central processing, NetMax
is a powerful physical complement to EV's IRIS-Net protocol,
which gives designers and end-users the industry’s most
flexible routing, DSP, and component-level system control
and supervision. EQ, crossovers, dynamics, FIR-Drive
loudspeaker optimization—NetMax does it all with superior
digital fidelity.
Each 2RU NetMax chassis supports up to 1900 MIPS
of processing power and up to 32 local audio channels. And
with NetMax's modular, field-configurable architecture, every
system can be tailored to current needs without being locked
out of future expansion. Designed for both installations and
touring systems, NetMax is an indispensable tool for concert
halls, houses of worship, hotels, casinos, convention centers,
sporting arenas and stadiums. Simply put, there's no more
powerful, intelligent way to tame the complexity of modern
sound systems than NetMax.
AO-1
•
•
•
•
•
•
Full IRIS-Net supervision, control and scheduling
Comprehensive 32-channel routing and mixing
Huge range of DSP filters, EQ, dynamics and delays
FIR-Drive loudspeaker optimization
300 MIPS internal processing
Up to 1000 MIPS of processing
power available per unit
• 115 dB dynamic range for clean, quiet sound
DSP-2
DM-1
• Automatic configuration via IRIS-Net
with installation/removal notification
• On-board DSP (100 MIPS)
NETMAX COBRANET AUDIO NETWORK MODULE
• 48 kHz sample rate and 16-, 20- or 24-bit
word-length
• Control, monitoring, configuration and
firmware updates via Ethernet
• Status LEDs for link, activity, fault and
CobraNet conductor status
NETMAX DANTE AUDIO NETWORK MODULE
• Connect NetMax to a Dante digital audio network
• Transmit up to 32 ins and 32 outs at 48 kHz
sample rate and 16-, 20- or 24-bit word-length
• Low latency (typically below 1 ms)
ELECTRONICS
Enhanced DSP power for NetMax controllers
Adds 1500 MIPS computing capacity
Easy field installation into chassis card slot
Three additional RAM banks (512 k x 24
bit) for delay lines up to 32.7 seconds
• Double-precision DSP algorithms
• Automatic configuration via IRIS-Net
with installation/removal notification
NETMAX 8-CHANNEL ANALOG INPUT CARD
•
•
•
•
64
• Double-precision DSP algorithms
• Automatic configuration via IRIS-Net
with installation/removal notification
• Automatic configuration
• IRIS-Net notification of installation and removal
• On-board DSP (100 MIPS)
•
•
•
•
Two Gigabit Ethernet interfaces for system redundancy
Status LEDs for each interface
Dante Zen device-discovery
Compatible with Dante Virtual Soundcard
N8000 1500 MIPS DSP EXPANSION MODULE
•
•
•
•
AI-1
Enhanced DSP power for NetMax controllers
Adds 300 MIPS computing capacity
Easy field installation into chassis card slot
48-bit signal processing
Two RAM banks (512 k x 24 bit) for
delay lines up to 21.8 seconds
Eight channels of AES/EBU digital audio output
Four Euroblock output connectors
48 kHz sample rate
+21 dBu maximum output level
• Connect NetMax to a CobraNet
digital audio network
• Two 100BASE-TX Ethernet interfaces (IEEE
802.3u compatible) for system redundancy
• 100 mbps data transmission rate
• Four serial ports each for input and output
for a total of up to 32 ins and 32 outs
N8000 300 MIPS DSP EXPANSION MODULE
•
•
•
•
•
Eight electronically balanced line-level outputs
Euroblock connectors
118 dB dynamic range for superior sonic quality
100 Ω output impedance
NETMAX 8-CHANNEL DIGITAL OUTPUT CARD
•
•
•
•
CM-1
• Independent sample rate conversion for each input
• Lock indication LED
• On-board DSP (100 MIPS)
Eight electronically balanced line-level inputs
Euroblock connectors
20 kΩ input impedance
117 dB dynamic range for superior sonic quality
• Automatic configuration
• IRIS-Net notification of installation and removal
• On-board DSP (100 MIPS)
TPI-5
5.7" TOUCH PANEL CONTROLLER FOR IRIS-NET SYSTEMS
• Custom control surface design
• Custom graphical user interfaces via IRIS-Net
• Functionality and graphical representation
for a wide range of applications
• No fan, no hard disk
• Reliable server technology
PWS-4, PWS-6, PWS-C
•
•
•
•
•
ELECTRONICS
DSP-1
• Internal 48-bit processing for
outstanding audio fidelity
• Auto-compiling DSP engine with
ultra-low fixed latency
• Modular architecture with hardware expansion slots
• Fully-programmable analog and digital GPIO support
• Support for Ethernet, RS-232, USB and CAN
• CobraNet and Dante audio networking options
Gain and level adjustable via IRIS-Net
Automatic configuration
IRIS-Net notification of installation and removal
On-board DSP (100 MIPS)
NETMAX 8-CHANNEL ANALOG OUTPUT CARD
•
•
•
•
NETMAX 300 MIPS DIGITAL MATRIX CONTROLLER
•
•
•
•
NETMAX 8-CHANNEL DIGITAL INPUT CARD
• Eight channels of AES/EBU or S/PDIF digital audio
• Four input connectors, Euroblock or TOSLINK optical
• Supports sample rates from 32–192 kHz
DO-1
N8000
Eight electronically balanced mic/line inputs
Euroblock connectors
48 V phantom power
Mic/line pad, selectable via IRIS-Net
• Operates independently or in conjunction with additional
IRIS-Net applications to provide maximum flexibility
• High durability
• Built to industrial standards, ensuring robust and reliable
operation in even the most demanding of environments
PROGRAMMABLE WALL STATIONS
Modular standard-mount keypads for NetMax
Convenient control for volume, source, presets, etc.
Up to three front units in a wall station
PWS-C connects front units to CAN bus
Easy daisy-chaining with included connection wire
•
•
•
•
Easy labeling, protected by transparent cover
Integrated status LEDs
Button and LED configuration via IRIS-Net
Customizable button behavior
(momentary, latching or radio)
65
Sound System Processors
Proven in thousands of installations and live applications
around the world, EV delivers truly state-of-the-art DSP for
today's applications. EV's Dx46 sets the standard for digital
TWO-IN/SIX-OUT FIR-DRIVE SOUND SYSTEM PROCESSOR
• IRIS-Net software provides complete
control, monitoring and supervision
• FIR-Drive loudspeaker optimization
• Analog and AES/EBU inputs
• Switchable -6 dB pre-A/D converter pad
• 24-bit AD/DA conversion
• 48-bit filter algorithms
• 115 dB dynamic range
• Ethernet and USB data interfaces
DC-One
•
•
•
•
•
Dedicated array EQ and delay sections
4 separate delay sections
5 contact closure inputs
60 factory presets, 30 user presets
Unique edit/compare mode for
audible parameter adjustment
• Full loudspeaker protection package, including
both Peak Anticipation and TEMP limiters
• Editor Software IRIS-Net
ELECTRONICS
Dx46
DC-One
Analog Inputs (Electronically Balanced)
Two XLR, Two XLR THRU OUT
Two XLR, Two XLR THRU OUT
TWO-IN/SIX-OUT SOUND SYSTEM PROCESSOR
Analog Outputs (Electronically Balanced)
Six XLR
Six XLR
Digital Inputs
XLR AES/EBU (2-channel)
XLR AES/EBU (2-channel)
•
•
•
•
•
•
•
Maximum Input Voltage
8.7 V/+21 dBu (analog pad not engaged)
8.7 V/+21 dBu (analog pad not engaged)
Nominal Input Voltage
1.55 V/+ 6 dBu
1.23 V/+4 dBu
Input Impedance (Balanced)
10 kΩ
10 kΩ
Maximum Output Voltage
8.7 V/+21 dBu
8.7 V/+21 dBu
Nominal Output Voltage
1.55 V/+6 dBu
1.23 V/+4 dBu
Output Impedance (Balanced)
50 Ω
50 Ω
Frequency Response
20 Hz – 22 kHz (+/-0.5 dB)
10 Hz – 22 kHz (±0.5 dB)
Dynamic Range
116 dB (A-weighted)
111 dB (unweighted, band limited 22–22,000 Hz)
THD+N
<0.002% (band limited 20–20,000 Hz)
<0.01% (band limited 22–22,000 Hz)
A/D Conversion
24-bit Delta Sigma
24-bit/Sigma-Delta (linear phase) 128 times oversampling
D/A Conversion
24-bit Delta Sigma
24-bit/Sigma-Delta 128 times oversampling
Data Format
24-bit
24-bit
Internal Processing
48-bit double precision
32-bit floating point
Sample Rate
48 kHz
48 kHz
Control Protocol
USB, Ethernet
Front-panel USB port
Dimensions (H x W x D)
1.74" x 19" x 14"
(44.25 x 482.6 x 355.6 mm)
1.74" x 19" x 14"
(44.25 x 482.6 x 355.6 mm)
Net Weight
10.14 lb (4.6 kg)
10.14 lb (4.6 kg)
DC-One Editor Software control via USB port
Analog or AES/EBU Inputs
Switchable -6 dB pre-A/D converter pad
24-bit AD/DA conversion
32-bit Floating Point internal processing
111 dB dynamic range
Six predefined operation configurations
• Contact closure interface for
remote preset recall
• 60 factory presets, 20 user presets
• Unique edit/compare mode for
audible parameter adjustment
• Highly-customizable security settings
DC-One Editor Software PC-BASED EDITING SOFTWARE FOR DC-ONE
• Easy connection to DC-One hardware via USB
• Detailed, real-time control and
supervision of DC-One hardware
• Intuitive user interface
• State-of-the-art graphics provide detailed,
easy-to-understand system overview
• Graphical navigation and block diagrams provide
easy access to all functions and DSP sections
66
• Unique delay adjustment interface positions
components as they actually exist in space
• Selective lockout of front-panel access
protects settings from tampering
• Available as a free download at
www.electrovoice.com
ELECTRONICS
Dx46
loudspeaker controllers, providing 48-bit filter algorithms,
24-bit AD/DA conversion and a dynamic range of 115 dB.
67
©2014 Bosch Security Systems, Inc. LITPSCAT0214
Headquarters Americas:
Bosch Security Systems, Inc.
12000 Portland Ave South
Burnsville, MN 55337 | USA
Ph: 1 800 289 0096
Fax: 1 800 955 6831
buv.orders@us.bosch.com