- Computers & electronics
- Computer components
- Chassis components
- Mounting kits
- Accu-Tech
- 13912-703
- Data Sheet
advertisement
P R O D U C T D A T A S H E E T
VELOCITY ™ CABLE MANAGEMENT for CPI Rack Systems
K E Y F E A T U R E S
• Quick and easy tool-less snap together design takes approximately 3 - 5 minutes to unpack, assemble and install
• Compact packaging is 25% - 57% smaller than comparable managers, easy to ship, requires less storage space, reduces waste and makes cartons easier to handle
• Larger cross-section on single-sided vertical managers provides up to 1/3 more cable management space
• Openings on the side of the manager align with each rack-mount unit
• T-shaped cable guides provide more space between fingers to organize cables by rack-mount unit
• Rounded edges on cable guides and openings protect cables as they enter and exit the manager
• Openings in the back of the manager allow easy front-to-rear cabling
• Snap-on covers secure and protect cables
A P P L I C A T I O N S
• CPI’s Velocity Cable Management provides an economical cable management solution for CPI
Rack Systems.
• Create vertical and horizontal pathways that store and organize premise cables and patch cords on two and four-post Rack Systems.
U S E W I T H
• Standard Rack 3”D (80 mm)
• QuadraRack™ Server Frame
• QuadraRack™ 4-Post Frame
• Adjustable QuadraRack™
• Adjustable ServerRack
• Adjustable Rail QuadraRack™
• Adjustable Rail ServerRack
R E L A T E D A C C E S S O R I E S
• Cable Spool Kit
• Cable Lashing Bar Kit
• Cable Ring Kit
• Jumper Trays
• Patch Panel Wire Management Bar
Tool-less Assembly
Components snap together for quick and easy assembly
Simplified Cable Management
Optimize cable pathways using the integrated T-shaped cable guides and protect cables with snap-on covers
Increased Cable Capacity
Single-sided vertical managers are deeper to provide more cable capacity
Compact Packaging
Reduces waste, freight costs and uses less storage space
CPI’s Velocity™ Cable Management is an economical cable management solution for everyday use in telecommunication rooms, equipment rooms and lab spaces and creates a complete vertical and horizontal pathway for premise cabling and patch cords on CPI Rack Systems.
Velocity Cable Management includes single- and double-sided vertical cable managers available in four widths and three heights, and matching single-sided horizontal cable managers in three heights. The vertical cable managers ship unassembled in compact packaging to reduce shipping costs and storage space, providing easier staging and handling on the job site with less packaging to remove. No tools are required to assemble the cable manager. The components simply snap together and the manager bolts to the side of the rack with included hardware.
The vertical cable manager features a large cross section to maximize internal cable management space. To simplify cable management, T-shaped cable guides and openings on the sides of the manager align with each rack-mount unit and have rounded edges to protect cables from snags. Snap-on covers are included and swing open to the right or left to provide easy access and protect cables when closed. The manager has openings in the body which allow cables to pass easily front-to-rear. Add the accessory Cable Spool Kit to manage fiber, the Cable Lashing Bar Kit to secure large cable bundles or the Cable Ring Kit to create a rear pathway on the back of single-sided managers.
The horizontal cable manager ships fully assembled and also features T-shaped cable guides at the top and bottom of the manager to organize patch cords. Two cable openings in the rear of the manager allow frontto-rear cabling and the snap-on cover stays in the opened position to provide easy access to cables.
See inside for product details. Contact CPI Technical Support for configurations assistance.
+1-800-834-4969 [email protected]
www.chatsworth.com
P R O D U C T D A T A S H E E T
S P E C I F I C A T I O N S
• Vertical and horizontal cable managers for open two and four-post CPI Rack Systems
• For indoor use only, in environmentally controlled areas; may not be used outdoors, in harsh environments or in air-handling spaces
• The Velocity Single-Sided Vertical Cable Manager includes:
- Four vertical side sections with T-shaped cable guides (fingers) spaced 1U apart
- Four mid panels with attachment points for cable management accessories
- Two splice plates used to assemble the top and bottom side sections
- Two half-height covers that snap onto the
T-shaped cable guides
- Eight M8 hex bolts, washers and hex flange nuts to secure cable managers to the rack
• The Velocity Double-Sided Vertical Cable
Manager includes:
- Four vertical side sections with T-shaped cable guides (fingers) spaced 1U apart
- Four mid panels with attachment points for cable management accessories
- Two splice plates used to assemble the top and bottom side sections
- Four half-height covers that snap onto the
T-shaped cable guides
- Eight M8 hex bolts, washers and hex flange nuts to secure cable managers to the rack
• The Velocity Horizontal Cable Manager includes:
- One 19”W EIA rack-mount cable manager with
T-shaped cable guides (fingers)
- One cover that snaps onto the T-shaped cable guides
- Four #12-24 x 1” rack-mount screws and four
M6 x 25 mm rack-mount screws
• Packaging:
- Each vertical cable manager ships unassembled in a single carton
- Each horizontal cable manager ships fully assembled in a single carton
• Sizes: See ordering information at right
• Cable Fill: See cable fill table at www.chatsworth.com/cablefill
• Material:
- Vertical cable manager has steel mid panels and splice plates and plastic sides; covers on 3.6”W
(91mm) and 6”W (152 mm) managers are plastic; covers on 10”W (254 mm) and 12” (305 mm) managers are steel with plastic hinges
- Horizontal cable manager is plastic
• Construction: Snaps together
• Finish: Black epoxy-polyester hybrid powder coat paint on steel parts; black plastic
V E L O C I T Y C A B L E M A N A G E M E N T
O R D E R I N G I N F O R M A T I O N
Part
Number
13901-701
13902-701
13904-701
13905-701
13901-703
13902-703
13904-703
13905-703
13901-715
13902-715
13904-715
13905-715
Velocity Single-Sided Vertical Cable Managers
Description
H x W x D in (mm)
For 6’H (1.8 m), 38U Racks
70 x 3.6 x 9.7 (1778 x 91 x 246)
70 x 6 x 9.8 (1778 x 152 x 249)
70 x 10 x 10.3 (1778 x 254 x 262)
70 x 12 x 10.4 (1778 x 305 x 264)
For 7’H (2.1 m), 45U Racks
80.5 x 3.6 x 9.7 (2045 x 91 x 246)
80.5 x 6 x 9.8 (2045 x 152 x 249)
80.5 x 10 x 10.3 (2045 x 254 x 262)
80.5 x 12 x 10.4 (2045 x 305 x 264)
For 8’H (2.4 m), 51U Racks
91 x 3.6 x 9.7 (2311 91 x 246)
91 x 6 x 9.8 (2311 x 152 x 249)
91 x 10 x 10.3 (2311x 254 x 262)
91 x 12 x 10.4 (2311 x 305 x 264)
Shipping Weight lb (kg)
17 (7.7)
18 (8.2)
30 (13.6)
32 (14.5)
18 (8.2)
20 (9.1)
32 (14.5)
34 (15.4)
19 (8.6)
21 (9.5)
34 (15.4)
36 (16.3)
Color is black. Velocity Single-Sided Vertical Cable Managers are 9.5 inches deep (241 mm) without doors. The overall depth listed in the order table varies due to the bevel on the door which differs slightly with width. Usable depth is 7.5 inches (191 mm). Usable width is 1.3
inches (33 mm) less than overall width.
Part
Number
13911-701
13912-701
13914-701
13915-701
13911-703
13912-703
13914-703
13915-703
13911-715
13912-715
13914-715
13915-715
Velocity Double-Sided Vertical Cable Managers
Description
H x W x D in (mm)
For 6’H (1.8 m), 38U Racks
70 x 3.6 x 16.4 (1778 x 91 x 417)
70 x 6 x 16.6 (1778 x 152 x 422)
70 x 10 x 17.5 (1778 x 254 x 445)
70 x 12 x 17.8 (1778 x 305 x 446)
For 7’H (2.1 m), 45U Racks
80.5 x 3.6 x 16.4 (2045 x 91 x 417)
80.5 x 6 x 16.6 (2045 x 152 x 422)
80.5 x 10 x 17.5 ( 2045 x 254 x 445)
80.5 x 12 x 17.8 (2045 x 305 x 446)
For 8’H (2.4 m), 51U Racks
91x 3.6 x 16.4 (2311 x 91 x 417)
91 x 6 x 16.6 (2311 x 152 x 422)
91 x 10 x 17.5 (2311 x 254 x 445)
91 x 12 x 17.8 (2311 x 305 x 446)
Shipping Weight lb (kg)
23 (10.4)
26 (11.8)
37 (16.8)
40 (18.1)
25 (11.3)
28 (12.7)
40 (18.1)
43 (19.5)
27 (12.2)
30 (13.6)
44 (20.0)
47 (21.3)
Color is black. Velocity Double-Sided Vertical Cable Managers are 16 inches deep (406 mm) without doors. The overall depth listed in the order table varies due to the bevel on the door which differs slightly with width. Usable depth in the front of the manager is
7.5 inches (191 mm). Usable depth at the rear of the manager is 5.5 inches (140 mm). Usable width is 1.3 inches (33 mm) less than overall width.
2
P R O D U C T D A T A S H E E T
O R D E R I N G I N F O R M A T I O N
Part
Velocity Single-Sided Horizontal Cable Managers
Number
13930-701
13930-702
Description
H x W x D in (mm)
1U x 19 x 5.9 (150)
2U x 19 x 5.9 (150)
Shipping
Weight lb (kg)
2 (0.9)
3 (1.4)
13930-703 3U x 19 x 5.9 (150) 3 (1.4)
Color is black. 1U = 1.75 inches (44.45 mm); the overall height of the manager is .03 inches
(0.16 mm) less than the full rack-mount unit height. Usable depth is 3.7 inches (94 mm).
The usable height of the manager varies but is 1.2 inches (31 mm) less than the overall height of the manager at the narrowest point.
Cable Spool Kit
The Cable Spool Kit includes four small cable spools to provide slack management and strain relief for patch cords and jumper cables inside the Velocity Vertical Cable Managers.
• Use in 6”W (152 mm) or wider vertical cable managers; one kit per side
• Attaches to the mid panel with included hardware
• Spools are 2” (51 mm) in diameter and 6”L (152 mm)
• Made from aluminum; painted black
• Each kit includes four spools and mounting hardware
Part
Number
Description
13935-701 Cable Spool Kit, Pack of 4
Color is black.
Shipping
Weight lb (kg)
2 (0.9)
Cable Distribution Spools
Cable Distribution Spools provide slack management and strain relief for patch cords and jumper cables inside Velocity Vertical
Cable Managers.
• Use in 10”W (254 mm) or 12”W (305 mm) vertical cable manager,
(will not fit in other sizes)
• Attaches to the mid panel with included hardware
• Spools are 2.75” (69.9 mm) in diameter and 5.9”L (150 mm)
• Made from black plastic
• Each kit includes four spools and mounting hardware
Part
Number
Description
Shipping
Weight lb (kg)
15008-001
Cable Distribution Spools,
Pack of 4
2 (0.9)
Color is black.
3
V E L O C I T Y C A B L E M A N A G E M E N T
Cable Distribution Spool Spacer Kit
Cable Distribution Spool Spacer Kit includes eight spacers that are used with the Cable Distribution Spools (P/N 15008-001) inside
Velocity Vertical Cable Managers to offset the spool so that the front edge of the spool is close to the front edge of the cable management fingers.
• Use in 10”W (254 mm) or 12”W (305 mm) vertical cable managers; use on the front side of double-sided managers only
• Attaches to the mid panel with included hardware
• Spacers are 2.8” (71 mm) in diameter and 2.5”L (64 mm)
• Made from black plastic
• Each kit includes eight spacers and mounting hardware
Part
Number
Shipping
Weight lb (kg)
1 (0.5) 35505-001
Color is black.
Description
Cable Distribution Spool
Spacer Kit
Cable Lashing Bar Kit
The Cable Lashing Bar Kit provides tie points for cables inside
Velocity Vertical Cable Managers.
• Use in 6”W (152 mm) or wider vertical cable managers; one kit per side
• Attaches to the rear/mid panel with included hardware
• Bars are .23” (5.7 mm) in diameter; two bars are 23.7”L (602 mm); four bars are 16.6”L (422 mm)
• Made from steel; zinc-plated, silver-colored
• Each kit includes six lashing bars and mounting hardware
Part
Number
Description
13928-001 Cable Lashing Bar Kit
Zinc plated, silver colored.
Shipping
Weight lb (kg)
2 (0.9)
P R O D U C T D A T A S H E E T
O R D E R I N G I N F O R M A T I O N
Cable Ring Kit
The Cable Ring Kit creates a separate cable pathway on the back of a Velocity Single-Sided Vertical Cable Manager for premise cables.
• Match the kit to the width and height of the vertical cable managers; one kit per manager
• Attaches to the sides with included hardware
• Rings are C-shaped, 3.0”H x 7.7”D (76 mm x 196 mm), with a plastic latch that spins open to provide access to cables
• Cable opening on 3.6”W (91 mm) rings is 1.4”W (36 mm); cable opening on other rings is 3.8”W (97 mm)
• Rings are made from aluminum and painted black; latch is black plastic
• Each kit includes multiple rings and mounting hardware. The
-7X6 kits include six rings, the -7X7 kits include seven rings, the
-7X8 kits include eight rings
Part
Number
Description
Height ft (m)
For 3.6”W (91 mm) Managers
Shipping
Weight lb (kg)
13934-716 For 6 (1.8) Manager, 13901-701 8 (3.6)
13934-717 For 7 (2.1) Manager, 13901-703 9 (4.1)
13934-718 For 8 (2.4) Manager, 13901-715 11 (5.0)
For 6”W (152 mm) Managers
13934-726 For 6 (1.8) Manager, 13902-701 9 (4.1)
13934-727 For 7 (2.1) Manager, 13902-703 11 (5.0)
13934-728 For 8 (2.4) Manager, 13902-715 12 (5.4)
For 10”W (254 mm) Managers
13934-746 For 6 (1.8) Manager, 13904-701 12 (5.4)
13934-747 For 7 (2.1) Manager, 13904-703 14 (6.4)
13934-748 For 8 (2.4) Manager, 13904-715 15 (6.8)
For 12”W (305 mm) Managers
13934-756 For 6 (1.8) Manager, 13905-701 14 (6.4)
13934-757 For 7 (2.1) Manager, 13905-703 16 (7.3)
13934-758 For 8 (2.4) Manager, 13905-715 18 (8.2)
Color is black.
Velocity Cable Management
Features quick and easy tool-less snap together design that takes approximately 3 - 5 minutes to unpack, assemble and install
V E L O C I T Y C A B L E M A N A G E M E N T
Step 1:
Insert mid panel into plastic cable side section
Step 2:
Insert the two splice plates into the slots at the end of each side section
Step 3:
Slide the top side section onto the protruding ends of the splice plates until fully seated
Step 4:
Mount each cover by positioning over the hinges and pressing firmly to snap into place
©2010 Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, Saf-T-Grip, Seismic Frame, SlimFrame,
MegaFrame and TeraFrame are federally registered trademarks of Chatsworth Products, Inc. Cube-iT Plus,
Evolution, OnTrac, QuadraRack and Simply Efficient are trademarks of Chatsworth Products, Inc.
All other trademarks belong to their respective companies. 05/10 MKT-60020-475
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project