LED Strobe Lights
SL-1301-EAQ
12 LEDs total, flash only
SL-1301-BAQ
32 LEDs total, 5 LED strips
Same as EAQ series plus adjustable flash speeds and patterns, and optional battery backup
SL-1301-SAQ
54 LEDs total, 10 LED strips
Same as BAQ series plus 100dB siren
Features:
Utilizes high-intensity LEDs
Operating life over 50,000 hours (over 5.7 years)
Same size as the SL-126Q strobe light
Simple 2-wire installation
Weather resistant
High-impact resistant case
High-impact and heat-resistant lens
Reverse polarity protection
Visible in all directions
5 lens colors available:
Amber, Blue, Clear, Green and Red
BAQ series also include all features of the EAQ plus:
5 Vertical LED strips (32 LEDs total) increase visibility from various directions
Adjustable flashing speed
6 different flashing options
Backup battery available for continuous lighting applications
SAQ series also includes all features of the BAQ plus:
10 Vertical LED strips (54 LEDs total)
Built-in 100dB siren (programmable)
Ordering Info:
Model 12 LED 32 LED 54 LED
Amber
Blue
Clear
Green
Red
SL-1301-EAQ/A SL-1301-BAQ/A SL-1301-SAQ/A
SL-1301-EAQ/B SL-1301-BAQ/B SL-1301-SAQ/B
SL-1301-EAQ/C SL-1301-BAQ/C SL-1301-SAQ/C
SL-1301-EAQ/G SL-1301-BAQ/G SL-1301-SAQ/G
SL-1301-EAQ/R SL-1301-BAQ/R SL-1301-SAQ/R
Specifications:
Model
Operating voltage
Current draw (max) 1
# of flash patterns 2
Flashing speed
Vertical LED strips
Total # of LEDs
Backup battery 3
Operating temperature
Electrical protection
Built-in siren
IP rating
Dimensions
1 Depending on settings
SL-1301-EAQ
6~12 VDC
200mA
1
130 times/min
0
12
No
SL-1301-BAQ SL-1301-SAQ
9~12VDC, 12 VAC 10~24 VAC/VDC
75~280mA 90~350mA
6 6
Adjustable 30~260 times/min
5
32
10
54
Yes Yes
-4°~144° F (-20°~65° C)
Reverse polarity protected
No
IP66
Yes (100dB)
IP55
3 15 /
16
”x2 29 /
32
” (100x74mm)
2 SL-1301-EAQ series has strobe only 3 9VDC battery not included
SECO-LARM
® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA, 92606
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: [email protected]
Copyright 2015 © SECO-LARM U.S.A, Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Pi_SL-1301-xAQ_150706
Programmable Flashing Patterns:
(BAQ & SAQ models only):
Dimensions:
Top View
DIP Switch Position Flash Pattern Description (SL-1301-BAQ shown)
1
Strobe
LEDs flash on and off continuously. (Default setting)
3 15 /
16
”
(100mm)
2
Rotate Clockwise
Light rotates clockwise in a circular fashion continuously. (Beacon)
Front View
3
Steady ON
All LEDs stay on. Ideal for continuous lighting applications.
2 29 /
32
”
(74mm)
2 3 /
64
”
(52mm)
4
5
6
Flash with Progressive ON
LEDs turn on progressively clockwise until all LEDs are lit (sweep), and then turn off.
Rotate Back and Forth
LED groups light up one at a time, rotating clockwise and counterclockwise.
Flash with Progressive ON/OFF
LEDs turn on progressively clockwise (sweep), then turn off progressively counterclockwise.
Bottom View
Also Available from SECO-LARM:
Note: The SL-1301 series LED strobe light has the same dimensions as the SL-126 series strobe light.
2 4 /
5
”
(71mm)
Replacement
Lenses
SL-126LQ/X
(Replace “X” with the first letter of the desired color)
Conduit Drop
SL-1901-DAQ
Mounting Options
Conduit Box
SL-1901-JAQ
Xenon Tube
Strobe Lights
SL-126Q Series
Conduit Drop
Application Photos
Conduit Box Both
Available in Red, Blue, Amber,
Clear, or Green
Available in Red, Blue, Amber,
Clear, or Green
SECO-LARM
® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA, 92606
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: [email protected]
Copyright 2015 © SECO-LARM U.S.A, Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Pi_SL-1301-xAQ_150706