Tripp Lite QSFP+ to QSFP+ 40Gb Passive DAC Copper Infiniband Cable, 2M (6-ft.)

QSFP+ to QSFP+ 40Gb Passive DAC Copper
Infiniband Cable, 2M (6-ft.)
MODEL NUMBER: N282-02M-BK
Highlights
40Gbps QSFP+ to QSFP+ 2
Meter patch cable
Meets or Exceeds 40-Gigabit
Ethernet 4oGBASE-CR4
standards
Fully compliant to the latest
QSFP+ MSA ( Multi Source
Agreement )
SDR, DDR, and QDR Compatible
Applications
Storage Area Networks ( SAN )
Data Center Cabling
Infrastructure
High Density Connections
Switched fabric I/O ( Ultra High
Bandwidth Switches & Routers )
Description
System Requirements
Tripp Lite's 2m QSFP+ (QSFP Plus) 40GBASE-CR4 / 802.3ba qualified passive copper cable provides next
Networking Switch or other
generation performance by combining four 10 Gb/s SFP+ channels into one affordable high-density package.
hardware with open QSFP+
Our QSFP+ cables integrate a new 40G Ethernet-optimized (40GbE) 38-position “board-as-connector” design,
Port(s)
with zinc die-cast backshells for superior EMI resistance, minimal insertion loss, and improved cross-talk
performance. Cable featuress 8-pair wire technology optimized for bandwidth-intense applications including
Package Includes
40-Gigabit Ethernet (40GBASE-CR4), 6G SAS, Fibre Channel and SONET. Flexible 24 AWG conductors
2 Meter, QSFP+ to QSFP+ High
maintain a smooth, high-frequency response (20 GHz). Each 2m (6.56-ft) length QSFP+ cable goes through a
Speed Passive Copper 40GB
rigorous assembly and test procedure aimed at eliminating unnecessary signal loss. Our cables are fully
Cable
compliant to the QSFP+ MSA and SFF-8436 architecture for guaranteed compatibility with all QSFP and QSFP+
ports.
Features
2 Meter QSFP+ tp QSFP+ 40Gb Passive DAC Copper Infiniband cable
Meets or Exceeds strict 40-Gigabit Ethernet 40GBase-CR4 standards
SDR, DDR, and QDR Compatible
QSFP+ to QSFP+ 30AWG SFF-8436 compliant cable and connector
Up to 10.3125 Gbps transfer rate per channel ( 40Gb aggregate )
Multi-platform support for 40Gb, SAS, Fibre Channel, and SONET
Zinc die-cast QSFP+ connectors with "Pull-to-Release" latching
Fully compliant to latest QSFP+ MSA ( Multi Source Agreement )
Lower port cost and reduced power budget vs Fiber Optics
RoHS, SFF-8436, and IEEE 802.3ba Compliant
BER better than 10¹²
Specifications
1/2
OVERVIEW
Model Type
QSFP+
INPUT
Cable Length (ft.)
7
Cable Length (m)
2
PHYSICAL
Color
Black
CONNECTIONS
Connector A
QSFP+ (MALE)
Connector B
QSFP+ (MALE)
CERTIFICATIONS
Certifications
MSA SFF-8436 and RoHS compliant
WARRANTY
Product Warranty Period (Worldwide)
Lifetime limited warranty
© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
2/2
Download PDF
Similar pages
Tripp Lite QSFP+ to QSFP+ 40Gb Passive DAC Copper Infiniband Cable, 1M (3-ft.)
Tripp Lite QSFP+ to QSFP+ 40Gb Passive DAC Copper Infiniband Cable, 3M (10-ft.)
Tripp Lite 0.5m, QSFP+
Tripp Lite QSFP+ to QSFP+ 40Gb Passive DAC Copper Infiniband Cable, 5M (16-ft.)
QSFP+ to QSFP+ 40Gb Passive DAC Copper Infiniband Cable, 2M (6-ft.) N282-02M-BK
QSFP+ to QSFP+ 40Gb Passive DAC Copper Infiniband Cable, 1M (3-ft.) N282-01M-BK
QSFP+ to QSFP+ 40Gb Passive DAC Copper Infiniband Cable, 3M (10-ft.) N282-03M-BK
QSFP+ to QSFP+ 40Gb Passive DAC Copper Infiniband Cable, 5M (16-ft.) N282-05M-BK
Pioneer User`s Manual - Merits Health Products
ZyXEL Prestige 2612HW-F1
Tripp Lite MTP/MPO Patch Cable, 12 Fiber, 40GbE, 40GBASE-SR4, OM3 Plenum-Rated - Aqua, 2M (6-ft.)
Tripp Lite MTP/MPO Patch Cable with Push/Pull Tabs, 12 Fiber, 40GbE, 40GBASE-SR4, OM3 Plenum-Rated - Aqua, 1M (3-ft.)
Tripp Lite MTP/MPO Patch Cable, 12 Fiber, 40GbE, 40GBASE-SR4, OM3 Plenum-Rated - Aqua, 10M (33-ft.)
Tripp Lite MTP/MPO Patch Cable, 12 Fiber, 40GbE, 40GBASE-SR4, OM3 Plenum-Rated - Aqua, 5M (16-ft.)
StarTech.com 2m QSFP+ 40-Gigabit Ethernet (40GbE) Passive Copper Twinax Direct Attach Cable
LP Series Miniature Snap-in Slide Switches Features/Benefits Typical Applications
Shielded D-Sub Backshells OS-DTZK Series TECHNICAL SPECIFICATIONS
Shielded D-Sub Backshells OS-DTPMK Series TECHNICAL SPECIFICATIONS
Shielded D-Sub Backshells OS-DVPMK Series TECHNICAL SPECIFICATIONS