Funkwerk RS353jv Datasheet

Add to my manuals
11 Pages

advertisement

Funkwerk RS353jv Datasheet | Manualzz

The universal VPN router with VDSL2, ADSL2+, and ISDN

bintec RS353jv

• VDSL2 / ADSL2+ / ISDN Modem- (Annex B/J)

• Vectoring ready

• 5x IPSec tunnels (optional 30 channels), HW acceleration

• Web based configuration

• Integrated Power Supply

• Flexible mounting: Desktop or 19"- Rack

• Stateful Inspection Firewall

bintec RS353jv

The universal VPN router with VDSL2, ADSL2+, and ISDN

The bintec RS353jv with its combined VDSL/ADSL2+ Modem (Annex B/J) and ISDN S0 interface is ideal for use in home offices and at small branch locations.

Product Description

The bintec RS353jv is a powerful professional VPN router for high-speed internet access. With its combination VDSL2 and ADSL 2+ modem, this model gives small and mid-sized companies the foundation they need to establish state-of-the-art, robust internet connectivity.

The RS353jv delivers advanced security, flexibility, and exceptional performance across a wide range of applications. The combination VDSL2 and ADSL2+ modem supports both the Annex B

(ADSL over ISDN, used primarily in Germany) ADSL standard as well as all digital mode Annex J without a splitter. It is also compatible with the popular "all IP" service of Deutsche Telekom.

This router boasts a fan-less metal housing, offers long-term reliability for business-critical applications, and makes an ideal access router for small and mid-sized enterprises (SMEs), branch locations, and home offices.

Thanks to the included 19-inch rackmount conversion bracket, customers can easily integrate this model into 19-inch server racks or operate it on the desktop. Rack mounting is further simplified by the device height of exactly one rack unit and the integrated power supply.

In addition to the VDSL2 /ADSL2+ modem, the bintec RS353jv also provides five Gigabit Ethernet ports which can be independently configured for use in a LAN, WAN, or DMZ. The device's integrated ISDN port can be used for remote configuration access or as an ISDN backup interface. The included five licenses for hardware-accelerated IPSec tunnels provide comprehensive high-speed VPN functionality and allow for secure connections to branch locations and off-site employees. A USB console port allows access to basic router features in critical environments.

With its wide range of WAN connectivity options, the RS353jv raises the bar for flexibility among access routers.

Smart design

The fan-free metal housing is a proven, rugged design that has set bintec devices apart from the competition for years. The integrated power supply and 19" conversion bracket now also make it easy to install in a 19" rack.

Maximum performance

The bintec RS353jv is based on a powerful platform with unrivaled capabilities. Customers with

VDSL2 connections can double their data transfer rates by taking advantage of VDSL vectoring technology. High speed interfaces handle heavy local network traffic with ease. You can even establish links between separate company locations over secure, encrypted VPN tunnels.

Airtight security

bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.bintec-elmeg.com

bintec RS353jv

04.06.2015

Subject to technical alterations

Page 2 / 11

The bintec RS353jv not only delivers outstanding performance, it also provides a comprehensive range of security features. With five simultaneous IPSec channels available, you can establish secure links between branch locations, subsidiaries, and home offices. Optional the quantity of

VPN tunnels can be extended to 30 tunnels. The integrated IPSec implementation in bintec routers allows the use of pre-shared keys as well as digital certificates as recommended by

Germany's Federal Office for Information Security. This lets you use a public key infrastructure and ensures maximum security. An object-oriented stateful inspection firewall offers packet filtering to provide additional protection against attacks.

Professional management

A graphical user interface is the primary means of configuring the router. This fast, web-based interface makes it easy to set up routers using the integrated configuration wizard.

Administrators can also manage the devices locally or remotely using configurable telnet, SSH,

ISDN login, or GSM dial-in. The bintec DIME Manager is a free software tool that allows administrators to manage up to 50 devices at once.

Ready for the future

Businesses can easily integrate the RS353jv into existing company networks. This bintec router also allows for a gradual migration to the new IPv6 internet protocol. The integrated VDSL2 modem of the bintec RS353jv supports VDSL bandplan 998 including profiles 8b and 17a, the standards used in Germany and most other European countries. The modem also supports automatic failover to ADSL2+. With easy migration from ADSL2+ to VDSL2 and support for VDSL vectoring, the professional-grade bintec RS353jv router is a sound investment in your organization's future.

WLAN Controller, HotSpot and adult content filtering

The router also includes all the functionality of the bintec WLAN Controller. The bintec WLAN controller lets you configure and monitor small- and mid-sized WLAN networks with up to 12 access points. No matter whether you need frequency management with automatic channel selection, loadbalancing across several access points, support for virtual LANs, or virtual wireless network administration (multi-SSID) - you have all these advanced features at your fingertips with the WLAN Controller. The software continually monitors the entire wireless network, notifying administrators of any malfunctions or security threats.

The router's integrated HotSpot Gateway together is an ideal complement to the WLAN

Controller in combination with a bintec HotSpot license, allowing operators to set up a wireless guest network that requires authentication. This secure separation between the guest network and company network is configured through the WLAN Controller and implemented using virtual wireless networks. An additional highlight is the optional Cobion filter which can be used to prevent children and youth from accessing inappropriate content.

Variants bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.bintec-elmeg.com

bintec RS353jv

04.06.2015

Subject to technical alterations

Page 3 / 11

bintec RS353jv (5510000345) IP Access Router; Desktop device with 19"Rack; incl. VDSL2 and ADSL2+ modem

(Annex B/J, ISDN); 1x ISDN BRI; incl. 5 IPSec tunnel (opt.30), certificates, HW encryption; 4+1 Gigabit Eth. switch; USB Port Typ B; USB port; german and intern.

version.

Features

ISDN

X.31 over CAPI

ISDN auto-configuration

Bit rate adaption

ISDN leased lines

CAPI

ISDN protocols

B channel protocols

Support for various connection paths: X.31/A for ISDN D-channel, X.31/A+B for ISDN B-channel,

X.25 within ISDN B-channel (also leased lines)

Automatic recognition and configuration of ISDN protocols

V.110 (1,200 up to 38,400 bps), V.120 up to 57,600 kbps (HSCSD) for connection to GSM subscribers

Supported leased lines: D64S, D64S2, TS02, D64S2Y

CAPI 2.0 with CAPI user concept (password for CAPI use)

Euro-ISDN (Point-to-mulitpoint/Point-to-point), 1TR6 and other national ISDN protocols

Excellent interoperability with other manufacturers (Raw HDLC, CISCO HDLC, X.75)

Routing

Multicast inside IPSec tunnel

Policy based Routing

Multicast IGMP Proxy

Extended RIP

RIP

Multicast IGMP

Enables the transmission of multicast packets via an IPSec tunnel

Extended routing (Policy Based Routing) depending of diffent criteria like IP protocols (Layer4), source/destination IP address, source/destination port, TOS/DSCP, source/destination interface and destination interface status

For easy forwarding of multicast packets via dedicated interfaces

Triggerd RIP updates according RFC 2091 and 2453, Poisened Rerverse for a better distribution of the routes; furthermore the possibility to define RIP filters for each interface.

Support of RIPv1 and RIPv2, separated configurable for each interface

Support of Internet Group Management Protocol (IGMP v1, v2, v3) for the simultaneous distribution of IP packets to several stations

Protocols / Encapsulations

PPP/MLPPP

DHCP

PPPoA

DYN DNS

Packet size controling

Support of Point to Point Protocol (PPP) for establishing of standard PPP connections, inclusive the

Multilink extension MLPPP for the bundeling of several connections

DHCP Client, Server, Proxy and Relay for siplified TCP/IP configuration

Point to Point Protocol over ATM for establishing of PPP connections via ATM/DSL

Enables the registering of dynamic assigned IP addresses at adynamic DNS provider, e.g. for establishing of VPN connections

Adaption of PMTU or automatic packet size controling via fragmentation bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.bintec-elmeg.com

bintec RS353jv

04.06.2015

Subject to technical alterations

Page 4 / 11

Protocols / Encapsulations

PPPoE (Server/Client)

MLPPPoE (Server/Client)

DNS Forwarding

IPoA

DNS

Point-to-Point Protocol over Ethernet (Client and Server) for establisching of PPP connections via

Ethernet/DSL (RFC 2516)

Multilink extension MLPPPoE for bundeling several PPPoE connections (only if both sides support

MLPPPoE)

Enables the forwarding of DNS requests of free configurable domains to assigned DNS server.

Enables the easy routing of IP via ATM

DNS client, DNS server, DNS relay and DNS proxy

Quality of Service (QoS)

Layer2/3 tagging

Bandwidth reservation

DiffServ

TCP Download Rate Control

Policy based Traffic Shapping

Warranty

Software Update

Conversion of 802.1p layer 2 priorisation information to layer 3 diffserv attributes

Dynamic reservation of bandwidth, allocation of guaranteed and maximum bandwidths

Priority Queuing of packets on the basis of the DiffServ/TOS field

For reservation of bandwidth for VoIP connections

Dynamic bandwidth management via IP traffic shaping

2 year manufacturer warranty inclusive advanced replacement

Free-of-charge software updates for system software (BOSS) and management software (DIME

Manager)

Redundancy / Loadbalancing

Load Balancing

VPN backup

BoD

BRRP

Static and dynamic load balancing to several WAN connections on IP layer

Simple VPN backup via different media. Additional enables the bintec elmeg interface based VPN concept the application of routing protocols for VPN connections.

Bandwidth on Demand: dynamic bandwidth to suit data traffic load

Optional: Bintec Router Redundancy Protocol for backup of several passive or active devices with free selectable priority

Layer 2 Functionality

Bridging

VLAN

Proxy ARP

Support of layer 2 bridging with the possibility of separation of network segment via the configuration of bridge groups

Support of up to 256 VLAN (Virtual LAN) for segmentation of the network in independent virtual segments (workgroups)

Enables the router to answer ARP requests for hosts, which are accessible via the router. That enables the remote clients to use an IP address from the local net.

Content of Delivery bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.bintec-elmeg.com

bintec RS353jv

04.06.2015

Subject to technical alterations

Page 5 / 11

Content of Delivery

ISDN (BRI/S0) cable

Installation Poster

19'' brackets and screws

Power cable

Safety Instructions

VDSL/ADSL cable

Ethernet cable

ISDN (BRI/S0) cable, 2m

Guide for the Installation

Two 19'' brackets for the switch panel mounting

Power Plug 100-240V / 1,5 A

Safety Instructions

VDSL/ADSL cable (RJ45-RJ45), 3m

1 Ethernet cable, 2m

Hardware - modular expansions

IP address ISDN B/D channel license

Free of charge license for IP address transmission in ISDN D or B channel for IPSec connections; registering under www.bintec-elmeg.com required.

ADSL

ATM

ATM

ATM

ATM

DSL

VDSL

VDSL Profile

VDSL

VDSL Vectoring

VDSL

ADSL

VPN

Number of VPN tunnels

PPTP (PAC/PNS)

GRE v.0

L2TP

IPSec

VDSL2 ITU G.993.2

VDSL Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a

Compatibel to VDSL2 connection of Deutsche Telekom

Vectoring ready & Vectoring capable

Compatible to ADSL/ADSL2/ADSL2+ over ISDN, Annex B

ADSL over ISDN (ITU G.992.1 Annex B, ISDN - compatible to U-R2 connection of Deutsche Telekom,

G.Lite (ITU G.922.2)

Support of Dying Gasp

Support of layer 1 protocol AAL5, PVCs, RFC 1483

Support of up to 7 virtual channels (VC)

Support of OAM F4/F5 line monitoring

Support of ATM traffic management (COS - CBR, VBR, UBR)

Inclusive 5 active VPN tunnels with the protocols IPSec, PPTP, L2TP and GRE v.0 (also in combination possible). Optional router extension up to 30 simultaneous utilisable VPN tunnel via license.

Point to Point Tunneling Protocol for establishing fo Virtual Privat Networks, inclusive strong encryption methods with 128 Bit (MPPE) up to 168 Bit (DES/3DES, Blowfish)

Generic Routing Encapsulation V.0 according RFC 2784 for common encapsulation

Layer 2 tunnelling protocol inclusive PPP user authentication

Internet Protocol Security establishing of VPN connections bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.bintec-elmeg.com

bintec RS353jv

04.06.2015

Subject to technical alterations

Page 6 / 11

VPN

IPSec Algorithms

IPSec hardware acceleration

IPSec IKE

IPSec IKE Config Mode

IPSec IKE XAUTH (Client/Server)

IPSec IKE XAUTH (Client/Server)

IPSec NAT-T

IPSec IPComp

IPSec certificates (PKI)

DES (64 Bit), 3DES (192 Bit), AES (128,192,256 Bit), CAST (128 Bit), Blowfish (128-448 Bit), Twofish

(256 Bit); MD-5, SHA-1, RipeMD160, Tiger192 Hashes

Integrated hardware acceleration for IPSec encryption algorithms DES, 3DES, AES

IPSec key exchange via preshared keys or certificates

IKE Config Mode server enables dynamic assignment of IP addresses from the address pool of the company. IKE Config Mode client enables the router, to get assigned dynamically an IP address.

Internet Key Exchange protocol Extended Authenticaion client for login to XAUTH server and

XAUTH server for loging of XAUTH clients

Inclusive the forwarding to a RADIUS-OTP (One Time Password) server (supported OTP solutions see www.bintec-elmeg.com).

Support of NAT-Traversal (Nat-T) for the application at VPN lines with NAT

IPSec IPComp data compression for higher data throughput via LZS

Support of X.509 multi-level certificates compatible to Micrososft and Open SSL CA server; upload of PKCS#7/8/10/12 files via TFTP, HTTP, HTTP, LDAP, file upload and manual via FCI

Certificates management via SCEP (Simple Certificate Enrollment Protocol)

Support of remote CRLs on a server via LDAP or local CRLs

IPSec SCEP

IPSec Certificate Revocation

Lists (CRL)

IPSec Dead Peer Detection

(DPD)

IPSec dynamic IP via ISDN

IPSec dynamic DNS

Continuous control of IPSec connection

IPSec RADIUS

IPSec Multi User

IPSec QoS

IPSec NAT

Number of IPSec tunnels

Transmission of dynamic IP address in ISDN D or B channel; free-of-charge licence necessary

Enables the registering of dynamic IP addresses by a dynamic DNS provider for establishing a IPSec connection.

Authentication of IPSec connections at a RADIUS server. Additionally the IPSec peers, which were configured on a RADIUS server, can be loaded into the gateway (RADIUS dialout).

Enables the Dial-in of several IPSec clients via a single IPSec peer configuration entry

The possibility to operate Quality of Service (traffic shaping) inside of an IPSec tunnel

By activating of NAT on an IPSec connection it is possible, to implement several remote locations with identical local IP addess networks in different IP nets for the VPN connection

Inclusive 5 active IPSec tunnels (expandable to 30 tunnels)

Security

NAT/PAT

Policy based NAT/PAT

Policy based NAT/PAT

Content Filtering

Stateful Inspection Firewall

Symmetric Network and Port Address Translation (NAT/PAT) with randomly generated ports inclusive Multi NAT (1:1 translation of whole networks)

Network and Port Address Translation via different criteria like IP protocols, source/destination IP

Address, source/destination port

For incoming and outgoing connections and for each interface variable configurable

Optional ISS/Cobion Content filter (30 day test license inclusive)

Packet filtering depending on the direction with controling and interpretation of each single connection status bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.bintec-elmeg.com

bintec RS353jv

04.06.2015

Subject to technical alterations

Page 7 / 11

Security

Packet Filter Filtering of IP packets according to different criteria like IP protocols, source/destination IP address, source/destination port, TOS/DSCP, layer 2 priority for each interface variable configurable

Logging / Monitoring / Reporting

Internal system logging

External system logging

E-Mail alert

SNMP traps

Activity Monitor

IPSec monitoring

Interfaces monitoring

ISDN monitoring

IP accounting

ISDN accounting

RADIUS accounting

Keep Alive Monitoring

Tracing

Syslog storage in RAM, display via web-based configuration user interface (http/https), filter for subsystem, level, message

Syslog, several syslog server with different syslog level configurable

Automatic E-Mail alert by definable events

SNMP traps (v1, v2, v3) configurable

Sending of information to a PC on which Brickware is installed

Display of IPSec tunnel and IPSec statistic; output via web-based configuration user interface

(http/https)

Statistic information of all pysical and logical interfaces (ETH0, ETH1, SSIDx, ...), output via web-based configuration user interface (http/https)

Display of active and past ISDN connections; output via web-based configuration user interface

(http/https)

Detailed IP accounting, source, destination, port, interface and packet/bytes counter, transmission also via syslog protocol to syslog server

Detailed ongoing recording of ISDN connection parameter like calling number and charging information, transmission also via syslog protocol to syslog server

RADIUS accounting for PPP, PPTP, PPPoE and ISDN dialup connections

Control of hosts/connections via ICMP polling

Traces can be stored in PCAP format, so that import to different open source trace tools (e.g.

wireshark) is possible.

Administration / Management

RADIUS

RADIUS dialout

TACACS+

Time synchronization

Automatic Time Settings

Supported management systems

Central check of access authorization at one or several RADIUS server, RADIUS (PPP, IPSec inclusive X-Auth and login authentication)

On a RADIUS server configured PPP und IPSec connection can be loaded into the gateway (RADIUS dialout).

Support of TACACS+ server for login authentication and for shell comando authorization

The device system time can be obtained via ISDN and from a SNTP server (up to 3 time server configurable). The obtained time can also be transmitted per SNTP to SNTP clients.

Time zone profiles are configurable. That enables an automatic change from summer to winter time.

DIME Manager, XAdmin bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.bintec-elmeg.com

bintec RS353jv

04.06.2015

Subject to technical alterations

Page 8 / 11

Administration / Management

Configurable scheduler

Configuration Interface (FCI)

Software update

Remote maintenance

ISDN remote maintenance

Configuring of time and event controlled tasks, e.g. reboot device, activate/deactivate interface, activate/deactivate WLAN, trigger SW update and configuration backup

Integrated web server for web-based configuration via HTTP or HTTPS (supporting self created certificates). This user interface is by most of bintec elmeg GmbH products identical.

Software updates are free of charge; update via local files, HTTP, TFTP or via direct access to the bintec elmeg web server

Remote maintenance via telnet, SSL, SSH, HTTP, HTTPS and SNMP (V1,V2,V3)

Remote maintenance via ISDN dial-in with checking of the calling number. The ISDN remote maintenance connection between two bintec elmeg devices can be encrypted.

GSM remote maintenance

Device discovery function

On The Fly configuration

SNMP

SNMP configuration

Configuration export and import

SSH login

HP OpenView

XAdmin

Configuration via USB

Remote maintenance via GSM login (external USB UMTS (3G) modem required)

Device discovery via SNMP multicast.

No reboot after reconfiguration required

SNMP (v1, v2, v3), USM model, VACM views, SNMP traps (v1, v2, v3) configurable, SNMP IP access list configurable

Complete management with MIB-II, MIB 802.11, Enterprise MIB

Load and save configurations, optional encrypted; optional automatic control via scheduler

Supports SSH V1.5 and SSH V2.0 for secure connections of terminal applications

Integration into Network Node Manager

Support of XAdmin roll out and configuration managemant tool for larger router installations

(IP+ISDN+GSM)

Configuration interface is available

Interfaces

Ethernet

USB 2.0 host

USB-Console

VDSL2/ADSL 2+/ADSL

ISDN Basic Rate (BRI)

Hardware

Realtime clock

Wall mounting

Desktop operation

5 x 10/100/1000 Mbps Ethernet Twisted Pair, autosensing, Auto MDI/MDI-X, up to 4 ports can be switches as additional WAN ports incl. load balancing, all Ethernet ports can be configured as LAN or WAN.

USB 2.0 full speed host port for connecting LTE(4G) or UMTS(3G) USB sticks (supported sticks: see www.bintec-elmeg.com)

Service-Interface USB 2.0 plug B (driver: see www.bintec-elmeg.com)

ADSL over ISDN (compatible to U-R2 connection of Deutsche Telekom)

1 x BRI (TE), 2 B channels

System time persists even at power failure for some hours.

Integrated in housing

Possible, rubber pad included the package bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.bintec-elmeg.com

bintec RS353jv

04.06.2015

Subject to technical alterations

Page 9 / 11

Hardware

Environment

Protection Class

Power supply

Power consumption (idling)

Housing

Dimension

Fan

Reset button

Status LEDs

Function Button

Standards and certifications

Temperature range: Operational 0°C to 40°C; storage -25°C to 70°C; Max. rel. humidity 10 - 95%

(non condensing)

IP20

Internal power supply 110-240V 1.5 A, with energy efficient switching controler; complies with EuP directive 2008/28/EC

Less than 5 Watt

Metal case, opening for Kensington lock, prepared for wall mounting

Ca. 265 mm x 40 mm x 170 mm (W x H x D)

Fanless design therefor high MTBF

Restart or reset to factory state possible

Power, Status, 10 * Ethernet, VDSL, ISDN, WLAN, USB, LTE

Supported from Release 9.1.10

R&TTE directive 1999/5/EG; EN 55022; EN 55024 + EN 55024/A1; EN61000-3-2; EN 61000-3-3; EN

61000-4-4; EN 60950-1; EN 300 328; EN 301 489-17; EN 301 489-1; EN 301 893

Accessoires

WLAN Controller

License WLAN Contr. 6AP (5500000943) WLAN Controller license for 6 Access Points (APs) or for the extension with 6 APs for the products: RS123x, RS353xx. Rxxx2 and RXL12x00.

Software Licenses

RSxx3/Rxx02/RTxx02/RXL-IPSEC25

(5500000781)

BRRP-RS123x/RS35x-Series (5500001630)

Cobion Content Filter Small (80551)

Additional 25 IPSec tunnel license for RSxx3, Rxx02, RTxx02 and RXL12xxx series

Software License for bintec Router Redundancy Protocol (BRRP) for RS123x and

RS35x-series

Cobion content filter for RSxxx, Rxx02, RTxx02 series; R230a(w), R232b(w), TR200,

R1200(w/wu), R3000(w), R3400, R3800, R232aw, RV-Series; list price for one year

Pick-up Service / Warranty Extension

Service Package 'small' (5500000810) Warranty extension of 3 years to a total of 5 years, including advanced replacement for bintec elmeg products of the category 'small'. Please find a detailed description as well as an overview of the categories on www.bintec-elmeg.com/servicepackages.

Product Services

HotSpotHosting 2yr 1 location (5500000861) HotSpot solution hosting fee for 2 year and 1 location bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.bintec-elmeg.com

bintec RS353jv

04.06.2015

Subject to technical alterations

Page 10 / 11

Product Services

HotSpotHosting 1yr 1 location (5510000198)

Additional HotSpot location (5510000199)

HotSpot solution hosting fee for 1 year and 1 location

Additional location for the HotSpot solution (551000198, 5500000861) valid for one year

Add-ons

bintec 4GE-LE (5530000119) LTE (4G)/UMTS (3G) extension device for router; 1x Gbit Eth; Simcard slot;

Wallmounting; PoE Injector inclusive bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.bintec-elmeg.com

bintec RS353jv

04.06.2015

Subject to technical alterations

Page 11 / 11

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement