Video | MIC Series Mounting Brackets and Other Accessories
MIC Series Mounting Brackets and Other
Accessories
www.boschsecurity.com
Bosch Security Systems offers a range of mounting
brackets and accessory products for the MIC Series of
cameras. The mounting brackets (for corner, wall, and
pole mounting) are available in the standard colors of
the MIC Series, including stainless steel. (Not all
colors of mounting brackets are available for all
models of MIC cameras.) The accessories have been
designed to work seamlessly with MIC Series cameras
to extend their functionality for your application. This
datasheet provides an overview of the available MIC
accessories.
u
Full range of mounting brackets and other
accessories.
u
Designed to integrate seamlessly with the MIC
Series.
u
Provides a best-fit solution for virtually any
application.
u
Easy to use and install.
u
Accessories extend functionality.
System overview
Mounting Combination for MIC-WMB, MIC-SCA and
MIC-SPR
Example Assembly: MIC-WMB, MIC-SCA, and MIC-SPR
2 | MIC Series Mounting Brackets and Other Accessories
1 MIC-WMB
2 MIC-SCA
3 MIC-SPR
Not shown: Mounting hardware.
Mounting Combination for MIC-WMB, MIC-SCA and
MIC-CMB
• four M8 x 25 stainless steel hex bolts
• four M8 stainless steel plain washers
• four M8 stainless steel nuts
Wall Mount Bracket
The MIC wall mount bracket (MIC-WMB) allows
mounting on building walls, or with a pole mount
bracket (MIC-PMB) and MIC-SCA to allow mounting on
lamp posts, scaffolding, and other nonstandard
mounting posts. The MIC-WMB is manufactured from
solid aluminum or stainless steel. It provides a 4 in.
pitched circle diameter (PCD) mounting position for
the MIC camera and has a deep bowl to accommodate
the composite cable and connector.
An O-ring provides a watertight seal to protect the
cable connector. Supplied hardware includes:
• four M8 x 20 stainless steel hex bolts
• four M8 stainless steel plain washers
• one O-ring, 80 mm x 3 mm
Example Assembly: MIC-WMB, MIC-SCA, MIC-CMB
1 MIC-WMB
2 MIC-SCA
3 MIC-CMB
Not shown: Mounting hardware.
Mounting Combination for MIC-PMB, MIC-SCA and
MIC-WMB
Example Assembly: MIC-PMB, MIC-SCA, MIC-WMB
1 MIC-PMB
2 MIC-SCA
3 MIC-WMB
Not shown: Mounting hardware.
Corner Mount Bracket
The MIC corner mount bracket (MIC-CMB) is
combined with individual brackets to allow MIC Series
cameras to be mounted on the corners of buildings.
The MIC-CMB is manufactured from stainless steel and
powder coated for maximum corrosion resistance.
Supplied hardware includes:
Spreader Plate
The MIC spreader plate (MIC-SPR) is used to spread
the weight of a MIC Series camera and its supporting
brackets so that the camera can be mounted securely
to flat masonry surfaces. The MIC-SPR is manufactured
from aluminum plate and powder coated to the same
standard as the MIC Series cameras. An unpainted
stainless steel version is also available.
Supplied hardware includes:
• four M8 x 30 stainless steel cap head bolts
• four M8 stainless steel plain washers
• four M8 stainless steel nuts
Deep Conduit Adapter
The MIC deep conduit adapter (MIC-DCA) is designed
to allow a weatherproof conduit to be fitted to protect
the MIC composite cable. The MIC-DCA is machined
from solid aluminum and provides a 4-in. pitched circle
diameter (PCD) mounting position for the MIC camera.
An O-ring provides a watertight seal to protect the
electrical connectors on the camera base and the
composite cable connector. The MIC-DCA has two
M25 holes for conduit or cable glands to be fitted, one
in the base and one side entry.
Supplied hardware includes:
•
•
•
•
four M8 x 20 stainless steel hex bolts
four M8 stainless steel plain washers
one end cap M25 x 1.5, with O-ring
one O-ring, 80 mm x 3 mm
Shallow Conduit Adapter
The MIC shallow conduit adapter (MIC-SCA) is used as
required with other mounting brackets. The MIC-SCA
has a single 25 mm side entry conduit fitting hole.
There is not sufficient room inside to allow the camera
to be mounted to it directly. (Use a MIC-DCA instead.)
The MIC-SCA is machined from solid aluminum or
stainless steel, and provides a 4-in. pitched circle
diameter (PCD) mounting position. An O-ring provides
a watertight seal to protect the composite cable.
Supplied hardware includes:
• four M8 x 20 stainless steel hex bolts
3 | MIC Series Mounting Brackets and Other Accessories
• four M8 stainless steel plain washers
• one end cap M25 x 1.5, with O-ring
• one O-ring, 80 mm x 3 mm
Pole Mount Bracket
The MIC pole mount bracket (MIC-PMB) is designed to
work with a shallow conduit adapter (MIC-SCA) and a
wall mount bracket (MIC-WMB) to allow MIC Series
cameras to be mounted on lamp posts, scaffolding,
and other nonstandard mounting posts with a wide
range of diameters. The MIC-PMB is machined from
clear anodized aluminum.
Supplied hardware includes:
• four M8 x 30 stainless steel cap head bolts
• six M6 x 20 stainless steel countersunk head bolts
• two high-torque stainless steel worm drive clips
(banding straps), 1 m long
• two pole mount blocks
• mounting plate
MIC440 Sunshield
The MIC440 Sunshield is a two-part molding designed
to provide additional protection against direct solar
radiation by reflecting solar exposure, and creating an
insulating gap between the environment and the
surface of the camera. Supplied hardware includes:
• four (4) M6 x 12 stainless steel socket head screws
MIC Sunshield for MIC612 and MIC412
The MIC Sunshield for thermal cameras is a two-part
molding, designed to provide additional protection
against direct solar radiation, particularly in sunny
climates.
Supplied hardware includes:
• eight 25 mm knurled stand-offs, M4 x 12 (external),
M3 x 15 (internal) for MIC612)
• eight 28 mm smooth stand-offs, M4 x 12 (external),
M3 x 15 (internal) (for MIC412)
• eight M3 x 10 stainless steel hex bolts
• eight M3 stainless steel plain washers
MICUSB485CVTR2 Converter
The MIC Series USB to RS-485 signal converter is a
compact unit that communicates from a PC’s USB port
directly to MIC Series cameras via the telemetry
connector in MIC Series power supplies. The converter
allows connection between MIC cameras and either
Bosch’s Configuration Tool for Imaging Devices
(CTFID) software (MIC550, MIC550IR, MIC612) or
Bosch Universal Camera Setup Software (“Cam-set”)
(MIC models 400AL, 400IR, 400ST, 412, 440, and
500). Each software application provides full control
of all camera setup and operation functions. The
converter is an available accessory for Models MIC550,
MIC550IR, MIC612, and later; CTFID is available for
download from www.boschsecurity.com. The
converter and CamSet software are supplied with
MIC440 and MIC400ST.
Biphase Converters
The MIC Biphase converter cards allow up to eight
MIC Series cameras to be interfaced with Bosch
Biphase compatible equipment. The card translates
Bosch Biphase protocol to RS485, half duplex
telemetry signals. It also allows the camera address to
be set through its integrated DIP switch selector.
The MIC-BP3 has its own enclosure with its own power
supply, which enables it to be used by MIC Series
power supplies that do not have an available
expansion slot.
The MIC-BP4 is a plug-in card that fits into an available
expansion slot within a non-infrared MIC Series power
supply unit.
MIC-ALM Alarm and Washer Pump Drive Card
The 8 Input Alarm Card (MIC-ALM) is designed to work
with a MIC Series power supply with a free expansion
slot. The MIC-ALM provides MIC Series cameras with
eight alarm inputs, a washer pump drive function with
test/pump priming capability and two additional
relays, which can be configured to operate external
equipment when an alarm signal is received. The card
is compatible with non-infrared MIC Series power
supply units. (The card cannot be used with a MIC
Series IR power supply.)
Washer Kits
The MIC Series washer kits (MIC-WKT, MIC-WKT-IR)
provide the necessary components to allow
connection of a washer pump and water reservoir tank
(sold separately) to a MIC Series camera, and control
via the camera telemetry. (The washer pump, water
reservoir tank, and tubing are sold separately as Bosch
washer kits (HAC-WAS05-20 and HAC-WAS30-50). For
more information, see the washer kits datasheet for
HSPS and MIC Series.)
Each MIC-WKT kit includes:
• washer pump drive card (MIC-WSH)
• washer jet nozzle
• two (2) mounting brackets for the washer jet nozzle
Each MIC-WKT-IR kit includes:
• washer jet nozzle
• two (2) mounting brackets for the washer jet nozzle
Note: The washer pump drive function is built-in to the
MIC Series infrared (IR) power supply units.
The MIC-WSH washer pump drive card fits into an
empty expansion slot of the non-infrared MIC Series
power supply units and provides electrical
connections, a washer pump relay, and a push to test /
pump prime function.
Replacement Wiper Blades
The model MIC-RWB is a pivoting, metal-backed
rubber wiper blade (36 mm x 13 mm x 3.5 mm) for
MIC Series 400 cameras. Models MIC-412-RWAB
(black) and MIC-412-RWAC (silver) are completely
anodized aluminum wiper arms with a fixed long-life
silicone wiper blade and associated hardware.
4 | MIC Series Mounting Brackets and Other Accessories
Installation/configuration notes
Corner Mount Bracket
Spreader Plate
Wall Mount Bracket
Deep Conduit Adapter
Shallow Conduit Adapter
Pole Mount Bracket
5 | MIC Series Mounting Brackets and Other Accessories
Technical specifications
Corner Mount Bracket
Dimensions
(W x H x D)
564 x 120 x 394 mm
(23.4 x 4.7 x 15.5 in)
Weight
2.9 kg (6.5 lb)
Material
Stainless Steel, power coated, with painted polyester
finish as below:
MIC440 Sunshield
MIC-CMB
Black (RAL9005), leatherette finish
MIC-CMB-W
White (RAL9003), leatherette finish
MIC-CMB-S
Stainless Steel, plain finish
MIC-CMB-BD
Black (RAL9005), sand finish
MIC-CMB-WD
White (RAL9010), sand finish
MIC-CMB-GD
Grey (RAL9006), sand finish
Wall Mount Bracket
MIC612/MIC412 Sunshield
MICUSB485CVTR2
Dimensions
(W x H x D)
340 x 124 x 120 mm
(13.4 x 4.9 x 4.7 in)
Weight
Aluminum: 1.95 kg (4.5 lb)
Stainless Steel: 5.4 kg (13.5 lb)
Material
Stainless Steel, or solid aluminum with painted
polyester finish as below:
MIC-WMB-B
Black (RAL9005), leatherette finish
MIC-WMB-W
White (RAL9003), leatherette finish
MIC-WMB-S
Stainless Steel, plain finish
MIC-WMB-BD
Black (RAL9005), sand finish
MIC-WMB-WD
White (RAL9010), sand finish
MIC-WMB-GD
Grey (RAL9006), sand finish
Spreader Plate
Dimensions
(W x H x D)
190 x 190 x 12.7 mm
(7.48 x 7.48 x 0.5 in)
Weight
Aluminum: 1.24 kg (2.73 lb)
Stainless Steel: 3.72 kg (8.2 lb)
Material
Stainless Steel, or aluminum, power coated, with
painted finish as below:
MIC-SPR
Black (RAL9005), leatherette finish
MIC-SPR-W
White (RAL9003), leatherette finish
MIC-SPR-S
Stainless Steel, plain finish
MIC-SPR-BD
Black (RAL9005), sand finish
MIC-SPR-WD
White (RAL9010), sand finish
MIC-SPR-GD
Grey (RAL9006), sand finish
6 | MIC Series Mounting Brackets and Other Accessories
Deep Conduit Adapter
MIC-USB485CVTR2
Dimensions
(H x D)
90 x 120 mm
(3.5 x 4.7 in)
Weight
0.293 kg
Weight
Aluminum: 1.45 kg (3.2 lb)
Stainless Steel: 4.14 kg (9.13 lb)
Max Current
100 mA
Isolation
None
Material
Stainless Steel, or machined aluminum with painted
finish as below:
MIC-DCA
Black (RAL9005), leatherette finish
MIC-DCA-W
White (RAL9003), leatherette finish
MIC-DCA-S
Stainless Steel, plain finish
MIC-DCA-BD
Black (RAL9005), sand finish
MIC-DCA-WD
White (RAL9010), sand finish
MIC-DCA-GD
Grey (RAL9006), sand finish
Biphase converters
Dimensions (W x H x D)
• MIC-BP3 IP65 Enclosure
120 x 55 x 80 mm
(4.72 x 2.17 x 3.15 in)
• MIC-BP3 Card
60 x 10 x 70 mm
(2.36 x 0.39 x 2.76 in)
• MIC-BP4 Card
60 x 10 x 70 mm
(2.36 x 0.39 x 2.72 in)
Weight
Shallow Conduit Adapter
• MIC-BP3 with Power Supply
381 g
Dimensions
(H x D)
40 x 120 mm
(1.6 x 4.7 in)
• MIC-BP4
35.2 g
Weight
Aluminum: 0.78 kg (1.72 lb)
Stainless Steel: 2.22 kg (4.89 lb)
Material
Stainless Steel, or solid aluminum with painted finish as
below:
MIC-SCA
Black (RAL9005), leatherette finish
MIC-SCA-W
White (RAL9003), leatherette finish
MIC-SCA-S
Stainless Steel, plain finish
MIC-SCA-BD
Black (RAL9005), sand finish
MIC-SCA-WD
White (RAL9010), sand finish
MIC-SCA-GD
Grey (RAL9006), sand finish
Bi-phase Specifications
Shielded 2-wire, half-duplex, multi-drop,
5000 ft cable limit requires 18 AWG wire
Cable Type
Shielded Twisted Pair (STP)
Distance
1524 m (5000 ft) Belden 8760
recommended
Transmission Rate
31.25 kHz
Gage
1.02 mm (18 AWG)
Termination
110 Ohm
Terminal Connector
Screw terminals
Voltage
4 Vpp
MIC-ALM
Pole Mount Bracket
Dimension
(H x W x D)
25 x 125 x 60 mm
(0.98 x 4.92 x 2.36 in)
Weight
61 g
1.7 kg (3.75 lb)
Material
PCB Card
Material
Mounting bracket, mounting blocks: Aluminum
Banding straps: Stainless Steel
Alarm
Inputs
8 with LEDs
Finish color
Clear anodized
Relays
2; Washer Pump Drive Function with prime/test button
Dimensions
(W x H x D)
127 x 160 x 9.5 mm (25.375 with pole mount blocks
fitted)
(5 x 6.30 x 0.374 in)
Weight
MIC-WKT
MIC612/412 Sunshield
Dimensions (W x H x D)
184 mm x 188.5 mm x 125 mm
Weight
0.19 kg (0.42 lb)
MIC440 Sunshield
Dimensions (W x H x D)
157 x 177 x 113 mm
(6.18 x 6.97 x 4.45 in)
Weight
0.11 kg (0.24 lb)
Dimensions
(W x H x D)
125 x 25 x 60 mm
(4.92 x 0.98 x 2.36 in.)
Weight
44 g (1.6 oz)
Wiper Blades
MIC Series 400 cameras
MIC-400-RWAB
Black
7 | MIC Series Mounting Brackets and Other Accessories
MIC-400-RWAC
Clear
MIC-400-RWAS
316L Stainless Steel
Dimensions
67 x 15 x 9 mm (2.64 x 0.59 x 0.35 in)
MIC Series 612 cameras
MIC-WMB-BD Wall Mount Bracket, Black
Wall mount bracket, black sand finish (RAL9005)
Order number MIC-WMB-BD
MIC-WMB-WD Wall Mount Bracket, White
Wall mount bracket, white sand finish (RAL9010)
MIC-412-RWAB
Black
MIC-412-RWAC
Clear
Dimensions
104 x 12.7 x 9 mm (4.09 x 0.5 x 0.35 in)
MIC Series 440 cameras
Order number MIC-WMB-WD
MIC-WMB-GD Wall Mount Bracket, Grey
Wall mount bracket, grey sand finish (RAL9006)
Order number MIC-WMB-GD
MIC-PMB Pole Mount Bracket
MIC-440-RWAB
Black
MIC-440-RWAC
Clear
Dimensions
95 x 12.4 x 9 mm
Ordering information
MIC-CMB Corner Mount Bracket
Corner mount bracket - black leatherette finish
RAL9005
Order number MIC-CMB
MIC‑CMB‑W Corner Mount Bracket, White
Corner mount bracket, white leatherette finish
(RAL9003)
Order number MIC-CMB-W
MIC-CMB-S Corner Mount Bracket, Stainless Steel
Corner mount bracket, grade 316 stainless steel
Order number MIC-CMB-S
MIC-CMB-BD Corner Mount Bracket, Black
Corner mount bracket, black sand finish (RAL9005)
Pole mount bracket (includes 2 x 455 mm stainless
steel banding straps for pole diameters 75 to 145 mm)
Order number MIC-PMB
MIC-SPR Spreader Plate
Aluminum spreader plate suitable for brickwork
surface mounting – black leatherette finish RAL9005
Order number MIC-SPR
MIC-SPR-W Spreader Plate, White
Aluminum spreader plate suitable for brickwork
surface mounting, white leatherette finish (RAL9003)
Order number MIC-SPR-W
MIC-SPR-S Spreader Plate, Stainless Steel
316L stainless steel spreader plate suitable for
brickwork surface mounting, plain finish
Order number MIC-SPR-S
MIC-SPR-BD Spreader Plate, Black
Aluminum spreader plate suitable for brickwork
surface mounting, black sand finish (RAL9005)
Order number MIC-SPR-BD
Order number MIC-CMB-BD
MIC-SPR-WD Spreader Plate, White
MIC-CMB-WD Corner Mount Bracket, White
Aluminum spreader plate suitable for brickwork
surface mounting, white sand finish (RAL9010)
Corner mount bracket, white sand finish (RAL9010)
Order number MIC-CMB-WD
MIC-CMB-GD Corner Mount Bracket, Grey
Corner mount bracket, grey sand finish (RAL 9006)
Order number MIC-CMB-GD
MIC‑WMB‑B Wall Mount Bracket, Black
Wall mount bracket, black leatherette finish (RAL9005)
Order number MIC-SPR-WD
MIC-SPR-GD Spreader Plate, Grey
Aluminum spreader plate suitable for brickwork
surface mounting, grey sand finish (RAL 9006)
Order number MIC-SPR-GD
MIC‑DCA‑B Deep Conduit Adapter, Black
Order number MIC-WMB-B
Deep conduit adapter for 4 in. PCD base - black
leatherette finish, RAL9005
MIC‑WMB‑W Wall Mount Bracket, White
Order number MIC-DCA
Wall mount bracket, white leatherette finish
(RAL9003)
MIC‑DCA‑W Deep Conduit Adapter, White
Order number MIC-WMB-W
Deep conduit adapter for 4 in. PCD base - white
leatherette finish RAL9003
MIC‑WMB‑S Wall Mount Bracket, Stainless Steel
Order number MIC-DCA-W
Wall mount bracket, grade 316 stainless steel
(Requires MIC‑SPR or MIC‑PMB for secure mounting
because of weight.)
Order number MIC-WMB-S
MIC‑DCA‑S Deep Conduit Adapter, Stainless Steel
Deep conduit adapter for 4 in. PCD base - grade 316
stainless steel, plain finish
Order number MIC-DCA-S
8 | MIC Series Mounting Brackets and Other Accessories
MIC-DCA-BD Deep Conduit Adapter, Black
MIC-516ALM Alarm Card
Deep conduit adapter for 4 in. PCD base, black sand
finish (RAL9005)
8 Input alarm card for MIC-516KBD
Order number MIC-DCA-BD
MIC-DCA-WD Deep Conduit Adapter, White
Deep conduit adapter for 4 in. PCD base, white sand
finish (RAL9010)
Order number MIC-DCA-WD
MIC-DCA-GD Deep Conduit Adapter, Grey
Deep conduit adapter for 4 in. PCD base, grey sand
finish (RAL 9006)
Order number MIC-516ALM
MIC-ALM Alarm and Washer Pump Drive Card
8 Input alarm and washer pump drive card for PSU
(Not for IR PSU)
Order number MIC-ALM
MIC-WKT Washer Kit
Washer kit for non infrared MIC models (includes
washer pump drive card, washer nozzle and mounting
brackets for wall and 4 in. PCD base)
Order number MIC-DCA-GD
Order number MIC-WKT
MIC‑SCA‑B Shallow Conduit Adapter, Black
MIC-WKT-IR Washer Kit
Shallow conduit adapter for 4 in. PCD base - black,
leatherette finish, RAL9005
Order number MIC-SCA
MIC‑SCA‑W Shallow Conduit Adapter, White
Washer kit for infrared power supplies only (includes
washer nozzle and mounting brackets for wall or 4 in.
PCD base)
Order number MIC-WKT-IR
Shallow conduit adapter for 4 in. PCD base - white,
leatherette finish, RAL9003
MIC-WNB-WMB Washer Nozzle
Order number MIC-SCA-W
Order number MIC-WNB-WMB
MIC‑SCA‑S Shallow Conduit Adapter, Stainless Steel
Shallow conduit adapter for 4 in. PCD base - grade
316 stainless steel, plain finish
Spare washer nozzle mounting bracket for wall bracket
MIC-RWB Replacement Wiper Blade
Replacement wiper blade (single) for MIC Series
400(AL, Stainless) cameras only
Order number MIC-SCA-S
Order number MIC-RWB
MIC-SCA-BD Shallow Conduit Adapter, Black
MIC-400-RWAB Replacement Wiper Assembly for
MIC400, Black
Shallow conduit adapter for a MIC-WMB, a MIC-PMB,
or a MIC-SPR, black sand finish (RAL9005)
Order number MIC-SCA-BD
MIC-SCA-WD Shallow Conduit Adapter, White
Shallow conduit adapter for a MIC-WMB, a MIC-PMB,
or a MIC-SPR mount, white sand finish (RAL9010)
Order number MIC-SCA-WD
MIC-SCA-GD Shallow Conduit Adapter, Grey
Shallow conduit adapter for a MIC-WMB, a MIC-PMB,
or a MIC-SPR, grey sand finish (RAL 9006)
Order number MIC-SCA-GD
MICUSB485CVTR2 USB to RS485 Signal Converter
USB to RS485 signal converter to allow MIC Series
cameras to connect to a PC, supplied with each
camera
Order number MICUSB485CVTR2
MIC-BP3 Biphase Converter
Biphase converter for IR power supplies or non-IR
power supplies without a free expansion slot available
Order number MIC-BP3
MIC-BP4 Biphase Converter
Biphase converter for non-IR versions of MIC series
power supply units
Order number MIC-BP4
Replacement silicone wiper assembly (single wiper
blade and associated hardware) for MIC400 cameras;
black.
Order number MIC-400-RWAB
MIC-400-RWAC Replacement Wiper Assembly for
MIC400, Silver
Replacement silicone wiper assembly (single wiper
blade and associated hardware) for MIC400 cameras;
silver.
Order number MIC-400-RWAC
MIC-400-RWAS Replacement Wiper Assembly, Stainless
Steel
Replacement silicone wiper assembly (single wiper
blade and associated hardware) for MIC400 cameras;
stainless steel.
Order number MIC-400-RWAS
MIC-412-RWAB Replacement Wiper Assembly for
MIC612 and MIC412, Black
Replacement silicone wiper assembly (single wiper
blade and associated hardware) for MIC612 and
MIC412 cameras; black.
Order number MIC-412-RWAB
9 | MIC Series Mounting Brackets and Other Accessories
MIC-412-RWAC Replacement Wiper Assembly for
MIC612 and MIC412, Silver
Replacement silicone wiper assembly (single wiper
blade and associated hardware) for MIC612 and
MIC412 cameras; silver.
Order number MIC-412-RWAC
MIC440 Sunshield
Sunshield for the MIC440 camera.
Order number MIC440SUNSHIELD
MICTHERSUNSHLD
Sunshield kit for MIC Thermal Cameras, white
Order number MICTHERSUNSHLD
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 2014 | Data subject to change without notice
2279980683 | en, V8, 19. Jun 2014
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
latam.boschsecurity@bosch.com
www.boschsecurity.com.cn
www.boschsecurity.com