Bosch ISM-BLA1-LM motion detector Datasheet
Add to my manuals2 Pages
Bosch ISM-BLA1-LM module attaches to Blue Line detectors to provide illumination up to the equivalent of bright moonlight when motion is detected. The two brightness levels and two durations (short or long) can be set with external switches. Installation is fast and easy, with no additional wiring needed. Compatible with Blue Line TriTech detectors, Blue Line Pet Friendly TriTech detectors, Blue Line PIR Detector, Blue Line Pet Friendly PIR Detector, and Blue Line quad PIR Detector.
advertisement
Intrusion Systems | ISM‑BLA1‑LM Blue Line Nightlight Module
ISM‑BLA1‑LM Blue Line Nightlight Module
▶ Modular construction fits all Blue Line detectors
▶ High quality, affordable, and easy to install
▶ Exterior switches control light duration (short or long) and on or off
▶ Two installer-selectable brightness levels
▶ Aesthetic design
The Blue Line ISM-BLA1-LM Nightlight Module attaches to the Blue Line detectors. When the detector senses a presence, the module's LEDs light and provide illumination up to the equivalent of bright moonlight
(0.1 cd at 30 cm [1 ft] from the detector).
Functions
Unique Interface
The Blue Line Nightlight Module mounts on top of and is wired to a Blue Line detector. This unique interface between module and detector makes installation fast, easy, and inexpensive. Once the detector is mounted and wired to the control panel, you simply add the module with no additional wiring needed.
Basic Operation
The nightlight module has a photo-sensor and four LEDs under a diffusing lens. It mounts on, draws its power from, and is controlled by any Blue Line detector. Once installed and set, if the detector senses motion and the photo-sensor does not detect light, the LEDs light.
Settings
Brightness
The brightness level can be set for low or high by positioning a jumper during module installation.
Duration
The length of time the LEDs remain lit is set with an external switch on the side of the module. Short duration is approximately 20 sec to 30 sec; while long duration is approximately 2 min to 4 min.
On-Off
Use the external On or Off switch on the side of the module to determine if the LEDs light when motion is detected.
Field Testing
The module comes with a piece of black plastic for covering the photo-sensor for field testing the module.
www.boschsecurity.com
2 | ISM‑BLA1‑LM Blue Line Nightlight Module
Certifications and Approvals
Region
Europe
Russia
USA
Belgium
Certification
CE 89/336/EEC, EN50130-4: 1996 +A1:
1998 +A2: 2003, EN61000-4-2: 1995
+A1: 1998 +A2: 2001, EN61000-4-3:
2002 +A1: 2002 +A2: 2005,
EN61000-4-4: 1995 +A1: 2000 +A2:
2001, EN61000-4-5: 1995 +A1: 2001,
EN61000-4-6: 1996 +A1: 2001 +A2:
2001 +A3: 2005, EN61000-4-11:1994
+A1: 2001
GOST
UL
GOST 12997-84, GOST R 50009-2000,
GOST R 51317.3.2-99, GOST R
51317.3.3-99, GOST R MEK
60065-2002
ANSR: Intrusion Detection Units (UL639),
ANSR7: Intrusion Detection Units
Certified for Canada (cULus)
INCERT B-509-0009/a
Installation/Configuration Notes
Compatibility Information
The BLA1-LM Nightlight Module is compatible with the following products:
Detectors BLD1
BLD1-P
BLP1
BLP1-P
BLQ1
Blue Line TriTech® Detectors
Blue Line Pet Friendly® TriTech® Detectors
Blue Line PIR Detector
Blue Line Pet Friendly® PIR Detector
Blue Line quad PIR Detector
Mounting Considerations
The nightlight module mounts on top of a Blue Line detector by removing the detector from its mounting base, installing the module on the detector base, and reattaching the detector and the module lens. Ensure there is enough space above the detector for the nightlight module.
Wiring Considerations
The three module wires attach to the terminal block of the
Blue Line detector.
Parts Included
Quant.
Component
1
1
1
Nightlight module
Test filter
Literature pack
Technical Specifications
Environmental Considerations
Complies with EN50131 Environmental Class II, Security Grade 2
Relative Humidity: Up to 95% non-condensing
Up to 85% for UL installations
Temperature (operating): -10°C to +49°C (+14°F to +120°F)
For UL Listed product installations,
0°C to +49°C (+32°F to +120°F)
Mechanical Properties
Color:
Dimensions:
Material:
Output
White
2.5 cm x 6.4 cm x 3.2 cm
(1.0 in. X 2.5 in. X 1.25 in.)
High-impact ABS plastic
Light Intensity:
Power Requirements
Current Draw
(LEDs lit):
Standby Power:
0.1 cd at 30 cm (1 ft)
Brightness level set low: 40 mA
Brightness level set high: 75 mA
No internal standby battery. Standby power must be provided by the control unit or by a UL Listed burglary power supply.
Ordering Information
ISM‑BLA1‑LM Blue Line Nightlight Module
Fits all Blue Line detectors
ISM-BLA1-LM
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180 [email protected]
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330 [email protected]
www.boschsecurity.com
© Bosch Security Systems Inc. 2010 | Data subject to change without notice
T1642545163 | Cur: en-US, V12, 2 Dec 2010
Asia-Pacific: Represented by
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6258 5511
Fax: +65 6571 2698 [email protected]
www.boschsecurity.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Connectivity technology: Wired
- Operating temperature (T-T): -10 - 49 °C
- White