Bosch ISC-PPR1-W16 motion detector

Intrusion Alarm Systems | ISC‑PPR1‑W16 Professional Series PIR Detector
ISC‑PPR1‑W16 Professional Series PIR
Detector
www.boschsecurity.com
The ISC-PPR1-W16 Professional Series PIR Detector is
exceptionally suited for commercial indoor
applications. Sensor data fusion technology ensures
that the detector sends alarm conditions based on
precise information. Tri-focus optics eliminate
coverage gaps and respond efficiently to intruders.
The powerful combination of unique features in the
Professional Series delivers superior catch
performance and virtually eliminates false alarms.
The self-locking two-piece enclosure, built-in bubble
level, flexible mounting height, and three optional
mounting brackets simplify installation and reduce
service time.
Functions
Sensor Data Fusion Technology
Sensor data fusion technology is a unique feature that
uses a sophisticated software algorithm to gather
signals from multiple sensors: two pyroelectric
sensors, a room temperature sensor, and a white light
level sensor. The microcontroller analyzes and
compares the sensor data to make the most intelligent
alarm decisions in the security industry.
u
16 m x 21 m (50 ft x 70 ft) coverage, selectable to 8
m x 10 m (25 ft x 33 ft)
u
EN50131-2-2 Grade 2 and VdS G107504 Class B
compliant
u
Sensor data fusion technology
u
Tri-focus optics technology
u
Active white light suppression
Tri-focus Optics Technology
Tri-focus optics technology uses optics with three
specific focal lengths: long-range coverage, middlerange coverage, and short-range coverage. The
detector applies the three focal lengths to 86
detection zones, which combine to make 11 solid
curtains of detection. Tri-focus optics technology also
includes two pyroelectric sensors, which deliver twice
the standard optical gain. The sensors process
multiple signals to deliver precise performance
virtually free of false alarms.
Active White Light Suppression
An internal light sensor measures the level of light
intensity directed at the face of the detector. Sensor
data fusion technology uses this information to
eliminate false alarms from bright light sources.
Field Selectable Coverage (16 m x 21 m or 8 m x
10 m)
Installers can use a DIP switch to select 16 m x 21 m
or 8 m x 10 m (50 ft x 70 ft or 25 ft x 33 ft) coverage.
2 | ISC‑PPR1‑W16 Professional Series PIR Detector
Dynamic Temperature Compensation
The detector automatically adjusts PIR sensitivity to
identify human intruders at critical temperatures.
Dynamic temperature compensation detects human
body heat accurately, avoids false alarms, and delivers
consistent catch performance at all operating
temperatures.
Cover and Wall Tamper Switch
When an intruder removes the cover or attempts to
separate the detector from the wall, a normally-closed
contact opens to alert the control panel.
Self-adjusting LED
The LED brightness adjusts automatically to the
surrounding light level. A blue light-emitting diode
(LED) indicates an alarm condition and activates
during a walk test.
Remote Walk Test LED
Users can enter a command through a keypad, a
control center, or programming software to remotely
enable or disable the walk test LED. Users can locally
enable or disable the walk test LED through the DIP
switch.
Alarm Memory
Alarm memory flashes the alarm LED to indicate
stored alarms for use in multiple unit applications. A
switched voltage from the control panel controls the
alarm memory.
Solid State Relays
Solid state relays send silent alarm output signals to
provide a higher level of security and reliability. An
external magnet does not activate the relay. The solid
state relay uses less current than a mechanical relay,
providing longer standby capacity during a power loss.
Draft, Insect, and Small Animal Immunity
The sealed optic chamber provides immunity to drafts
and insects, reducing false alarms. Small animal
immunity reduces false alarms caused by animals less
than 4.5 kg (10 lb), such as rodents.
Remote Self Test
A remote self test initiates when the walk test input
switches to its true state. The alarm relay and alarm
LED activate for four seconds following a successful
test. The trouble relay activates, and the alarm LED
flashes following a failed test.
Input Power Supervision
When the power is lower than 8 V, a low input power
trouble condition activates the trouble relay and
causes the LED to flash. The trouble condition clears
automatically when power reaches or exceeds 8 V.
DIP Switch Programming
The following functions are all programmed using DIP
switch settings:
• Remote Walk Test LED
• Long and Short Range Select
Trouble Memory
When the walk test input switches to its true state for
less than two seconds, the LED flashes to indicate the
most recent trouble condition. If there is no trouble in
memory, the LED does not flash. After twelve hours, or
after the detector receives a second walk test pulse
for two seconds or less, the LED stops flashing and
the trouble memory clears.
Certifications and approvals
The detector is designed to also comply with the requirements of:
Australia
C-Tick
Germany
VdS
Schaden
verhütun
g GmbH
G107504, Class B
Norway
FGI
D‑169/07, D‑620/07
Region
Certification
Europe
CE
2004/108/EC EMC Directive (EMC);
2006/95/EC Low-Voltage Directive
(LVD); 2011/65/EU Restriction of the
use of certain hazardous substances in
electrical and electronic equipment
EN5013
1
EN 50131-1, EN 50131-2-2:2008,
Grade 2 [-W16]
Belgium
INCERT
B-509-0051/d
USA
UL
ANSR: Intrusion Detection Units
(UL639), ANSR7: Intrusion Detection
Units Certified for Canada (cULus)
Italy
IMQ
France
AFNOR
26203926601 [-W16]
China
CCC
2009031901000558
Sweden
INTYG
Nr11-848
the Netherlands
REQ
07223000/AA/00
3 | ISC‑PPR1‑W16 Professional Series PIR Detector
Selectable Short-range Coverage: 8 m x 10 m
(25 ft x 33 ft)
Installation/configuration notes
0ft
1
2
3
12m
7ft 13ft 20ft 26ft 33ft 39ft 46ft 52ft
39ft
10m
33ft
8m
26ft
6m
20ft
4m
13ft
2m
7ft
0m
90°
1
0ft
Wiring Considerations
Recommended wire size is 0.2 mm2 to 1 mm2 (26 AWG
to 16 AWG).
2m
7ft
4m
13ft
Parts included
6m
20ft
Quantity
Component
8m
26ft
1
Detector
10m
33ft
2
Flat-head screws
12m
39ft
0m 2m 4m 6m 8m 10m 12m 14m 16m
2
Screw anchors
1
Nylon cable tie
1
Pattern Mask
1
Installation Guide
0ft
7ft 13ft 20ft 26ft 33ft 39ft 46ft 52ft
3m
10ft
1
2
3
0m
0ft
0m 2m 4m 6m 8m 10m 12m 14m 16m
0ft
7ft 13ft 20ft 26ft 33ft 39ft 46ft 52ft
Technical specifications
Electrical
7ft
Power Requirements
0m
0 ft
0m 2m 4m 6m 8m 10m 12m 14m 16m
Voltage (Operating):
9 VDC to 15 VDC
Current (Maximum):
< 15 mA
Current (Standby):
< 10 mA at 12 VDC
Relay:
Solid state relay, normally-closed (NC)
contacts, power supervised.
3 W, 125 mA, 25 VDC,
resistance < 10 Ω
Tamper:
Normally-closed (NC) contacts (with
cover on) rated at 25 VDC, 125 mA
maximum.
Connect tamper circuit to 24-hour
protection circuit.
2m
2
3
1
Long-range Coverage: 16 m x 21 m (50 ft x 70 ft)
0 f t 7 f t 13 f t 20 f t 26 f t
6m
20 f t
2
Mounting Considerations
The recommended mounting height is 2 m to 3 m (7 ft
to 10 ft).
Use an optional B328 Gimbal-mount Bracket or B335-3
Low-profile Swivel-mount Bracket to surface-mount
the detector on a flat wall or a corner.
Use an optional B338 Universal Ceiling Bracket to
mount the detector on the ceiling.
4m
13 f t
2m
7 ft
3
0m
2
90°
0 ft
2m
7 ft
4m
13 f t
6m
20 f t
0m 2m 4m 6m 8m
Mechanical
0 f t 7 f t 13 f t 20 f t 26 f t
Enclosure Design
3m
10 f t
2
3
0m
0m 2m 4m 6m
0 ft
0 f t 7 f t 13 f t 20 f t 26 f t
Color:
White
Dimensions:
127 mm x 69 mm x 58 mm
(5 in. x 2.75 in. x 2.25 in.)
Material:
High-impact ABS plastic
Indicators
2m
7 ft
2
0m 3
0 ft
0m 2m 4m 6m 8m
Alarm Indicator:
Blue alarm LED
4 | ISC‑PPR1‑W16 Professional Series PIR Detector
Zones
Zones:
86
Environmental
Relative Humidity:
0 to 95%, non-condensing
Temperature (Operating
and Storage):
-29°C to +55°C (-20°F to +130°F)
For UL Certificated installations,
0°C to +49°C (+32°F to +120°F)
Environmental Class II
EN 50130-5
Protection Rating:
IP41, IK04 (EN 60529, EN 50102)
Ordering information
ISC‑PPR1‑W16 Professional Series PIR Detector
Provides PIR, 16 m x 21 m (50 ft x 70 ft) coverage.
Order number ISC-PPR1-W16
Accessories
B328 Gimbal‑mount Bracket
Mounts on a single-gang box and allows rotation of a
detector. Wires are hidden inside.
Order number B328
B335-3 Swiveling low-profile mount
Swiveling, low-profile, plastic mount for wall mounting.
The vertical swivel range is +10° to -20°, while the
horizontal swivel range is ±25°. Available in triple
packs.
Order number B335-3
B338 Universal Ceiling‑mount Bracket
Swiveling plastic mount for ceiling mounting. The
vertical swivel range is +7° to -16°, while the horizontal
swivel range is ±45°.
Order number B338
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 2014 | Data subject to change without notice
2599254923 | en, V11, 19. Mar 2014
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
latam.boschsecurity@bosch.com
www.boschsecurity.com.cn
www.boschsecurity.com