Bosch ISC-PPR1-WA16G motion detector

Intrusion Alarm Systems | ISC‑PPR1‑WA16x Professional Series PIR Detectors with Anti‑mask
ISC‑PPR1‑WA16x Professional Series PIR
Detectors with Anti‑mask
www.boschsecurity.com
The ISC-PPR1-WA16x Professional Series PIR
Detectors with Anti‑mask are exceptionally suited for
commercial indoor applications. MANTIS anti-mask
technology makes obscuring the detector view nearly
impossible for intruders. Sensor data fusion
technology ensures that the detector sends alarm
conditions based on precise information. Tri‑focus
optics eliminate coverage gaps and respond efficiently
to intruders. The powerful combination of unique
features in the Professional Series delivers superior
catch performance and virtually eliminates false
alarms.
The self-locking two-piece enclosure, built-in bubble
level, flexible mounting height, and three optional
mounting brackets simplify installation and reduce
service time.
Functions
Sensor Data Fusion Technology
Sensor data fusion technology is a unique feature that
uses a sophisticated software algorithm to gather
signals from multiple sensors: two pyroelectric
sensors, a microwave assist sensor, a room
u
16 m x 21 m (50 ft x 70 ft) standard coverage; 8 m x
10 m (25 ft x 33 ft) selectable short range coverage
u
EN50131-2-2 Grade 3 compliant
u
Sensor data fusion technology
u
Tri-focus optics technology
u
MANTIS anti-mask
temperature sensor, and a white light level sensor. The
microcontroller analyzes and compares the sensor
data to make the most intelligent alarm decisions in
the security industry.
Microwave Assist Technology
Microwave assist technology provides additional input
into the sensor data fusion signal processing algorithm
to improve alarm decisions when PIR signals are
similar to false alarm sources.
Tri-focus Optics Technology
Tri-focus optics technology uses optics with three
specific focal lengths: long-range coverage, middlerange coverage, and short-range coverage. The
detector applies the three focal lengths to 86
detection zones, which combine to make 11 solid
curtains of detection. Tri-focus optics technology also
includes two pyroelectric sensors, which deliver twice
the standard optical gain. The sensors process
multiple signals to deliver precise performance
virtually free of false alarms.
2 | ISC‑PPR1‑WA16x Professional Series PIR Detectors with Anti‑mask
MANTIS Anti-mask Technology
MANTIS (Multi-point Anti-mask with Integrated Spray
detection) uses patented prism lenses and active
infrared detection to provide industry-leading
protection against all known forms of attack. MANTIS
complies with the latest worldwide regulatory
standards for detecting objects covering or placed in
front of the detector. MANTIS is sensitive to materials
regardless of texture or color, including fabric, paper,
metal, plastic, tape, and spray. When MANTIS
identifies a masking material, the detector sends a
supervision anti-mask signal to the control panel.
Active White Light Suppression
An internal light sensor measures the level of light
intensity directed at the face of the detector. Sensor
data fusion technology uses this information to
eliminate false alarms from bright light sources.
Available Coverage
The standard coverage is 16 m x 21 m (50 ft x 70 ft).
Installers can set a DIP switch at the detector to select
short range coverage of 8 m x 10 m (25 ft x 33 ft).
Dynamic Temperature Compensation
The detector automatically adjusts PIR sensitivity to
identify human intruders at critical temperatures.
Dynamic temperature compensation detects human
body heat accurately, avoids false alarms, and delivers
consistent catch performance at all operating
temperatures.
Cover and Wall Tamper Switch
When an intruder removes the cover or attempts to
separate the detector from the wall, a normally-closed
contact opens to alert the control panel.
Self-adjusting LED
The LED brightness adjusts automatically to the
surrounding light level. A blue light-emitting diode
(LED) indicates an alarm condition and activates
during a walk test.
Remote Walk Test LED
Users can enter a command through a keypad, a
control center, or programming software to remotely
enable or disable the walk test LED.
Alarm Memory
Alarm memory flashes the alarm LED to indicate
stored alarms for use in multiple unit applications. A
switched voltage from the control panel controls the
alarm memory.
Solid State Relays
Solid state relays send silent alarm output signals to
provide a higher level of security and reliability. An
external magnet does not activate the relay. The solid
state relay uses less current than a mechanical relay,
providing longer standby capacity during a power loss.
Draft, Insect, and Small Animal Immunity
The sealed optic chamber provides immunity to drafts
and insects, reducing false alarms. Small animal
immunity reduces false alarms caused by animals less
than 4.5 kg (10 lb), such as rodents.
Remote Self Test
A remote self test initiates when the walk test input
switches to its true state. The alarm relay and alarm
LED activate for four seconds following a successful
test. The trouble relay activates, and the alarm LED
flashes following a failed test.
Input Power Supervision
When the power is lower than 8 V, a low input power
trouble condition activates the trouble relay and
causes the LED to flash. The trouble condition clears
automatically when power reaches or exceeds 8 V.
Trouble Memory
When the walk test input switches to its true state for
less than two seconds, the LED flashes to indicate the
most recent trouble condition. If there is no trouble in
memory, the LED does not flash. After twelve hours, or
after the detector receives a second walk test pulse
for two seconds or less, the LED stops flashing and
the trouble memory clears.
DIP Switch Programming
The following functions are all programmed using DIP
switch settings:
•
•
•
•
•
Local Walk Test LED
Remote Walk Test Input Polarity
Alarm Memory Polarity
Long and Short Range Select
MANTIS Anti-mask On and Off
Certifications and approvals
Europe
WEEE
Waste Electrical and Electronic
Equipment Directive
The detectors are designed to also comply with the requirements of:
USA
FCC
Complies with Part 15
Region
Certification
Europe
CE
2004/108/EC EMC Directive (EMC),
2006/95/EC Low-Voltage Directive
(LVD), 1995/5/EC Radio equipment and
Telecommunications Terminal Equipment (R&TTE), 2011/65/EU Restriction
of the use of certain hazardous substances in electrical and electronic equipment [-WA16G, -WA16H]
EN5013
1
EN 50131-2-2:2008, Grade 3 [WA16G]
EN5013
1
EN 50131-2-2:2008, Grade 3 [WA16H]
Belgium
INCERT
B-509-0051/d
USA
UL
ANSR: Intrusion-detection Units (UL
639); ANSR7: Intrusion-detection Units
Certified for Canada (ULC-S306)
3 | ISC‑PPR1‑WA16x Professional Series PIR Detectors with Anti‑mask
Region
Certification
Italy
IMQ
CA12.00834 [-WA16G]
France
AFNOR
2630000480 [-WA16H]
AFNOR
2630000480 [-WA16G]
Sweden
INTYG
11-849 [-WA16G]
0m
Brazil
ANATEL
WA18G: 0890-08-1855
2m
7 ft
the Netherlands
NCP
ITD08501-PI Klasse 3
4m
13 f t
0 f t 7 f t 13 f t 20 f t 26 f t
6m
20 f t
0ft
2
3
13 f t
2m
7 ft
3
2
90°
0 ft
6m
20 f t
0m 2m 4m 6m 8m
Installation/configuration notes
1
4m
2
0 f t 7 f t 13 f t 20 f t 26 f t
12m
7ft 13ft 20ft 26ft 33ft 39ft 46ft 52ft
39ft
10m
33ft
8m
26ft
6m
20ft
4m
13ft
3m
10 f t
2
3
0m
0m 2m 4m 6m
0 ft
0 f t 7 f t 13 f t 20 f t 26 f t
2m
7 ft
2
2m
0m
0m 3
0 ft
0m 2m 4m 6m 8m
7ft
90°
1
0ft
2m
7ft
4m
13ft
6m
20ft
8m
26ft
10m
33ft
12m
39ft
0m 2m 4m 6m 8m 10m 12m 14m 16m
0ft
7ft 13ft 20ft 26ft 33ft 39ft 46ft 52ft
3m
10ft
2
3
1
0m
0ft
0m 2m 4m 6m 8m 10m 12m 14m 16m
0ft
Selectable Short-range Coverage 8 m x 10 m
(25 ft x 33 ft)
Mounting Considerations
The recommended mounting height is 2 m to 3 m (7 ft
to 10 ft).
Use an optional B328 Gimbal‑mount Bracket or B335‑3
Low‑profile Swivel‑mount Bracket to surface‑mount
the detector on a flat wall or in a corner.
Use an optional B338 Universal Ceiling Bracket to
mount the detector on the ceiling.
Wiring Considerations
Recommended wire size is 0.2 mm2 to 1 mm2 (26 AWG
to 16 AWG).
Parts included
7ft 13ft 20ft 26ft 33ft 39ft 46ft 52ft
Quantity
Component
7ft
1
Detector
0m
0 ft
0m 2m 4m 6m 8m 10m 12m 14m 16m
2
Flat-head screws
2
Screw anchors
1
Nylon cable tie
1
Pattern Mask
1
Installation Guide
2m
3
2
Long-range Coverage 16 m x 21 m (50 ft x 70 ft)
1
Technical specifications
Electrical
Power Requirements
Voltage (Operating):
9 VDC to 15 VDC
4 | ISC‑PPR1‑WA16x Professional Series PIR Detectors with Anti‑mask
Current (Maximum):
< 26 mA with alarm, trouble, and LEDs
active.
Current (Standby):
18 mA at 12 VDC
Relay:
Solid state relay, normally-closed (NC)
contacts, power supervised.
3 W, 125 mA, 25 VDC, resistance < 10 Ω.
Tamper:
Normally-closed (NC) contacts (with cover
on) rated at 25 VDC, 125 mA maximum.
Connect tamper circuit to 24-hour
protection circuit.
Trouble:
Solid state relay normally-closed (NC)
contacts.
Mechanical
Enclosure Design
Color:
White
Dimensions:
127 mm x 69 mm x 58 mm
(5 in. x 2.75 in. x 2.25 in.)
Material:
High-impact ABS plastic
Indicators
Alarm Indicator:
Blue alarm LED
Zones
Zones:
86
Environmental
Relative Humidity:
0 to 95%, non-condensing
Temperature (Operating
and Storage):
-30°C to +55°C (-22°F to +130°F)
For AFNOR certificated installations, -10°C
to +55°C (+14°F to +130°F)
For UL Certificated installations, 0°C to
+49°C (+32°F to +120°F)
Environmental Rating
(EN 50130-5):
Class II
Protection Rating
(EN 60529, EN 50102):
IP 41, IK04
Ordering information
ISC‑PPR1‑WA16G PIR Detector with Anti‑mask
10.525 GHz frequency.
Order number ISC-PPR1-WA16G
ISC‑PPR1‑WA16H PIR Detector with Anti‑mask
Provides PIR, 16 m x 21 m (50 ft x 70 ft) coverage with
anti-mask.
Order number ISC-PPR1-WA16H
Accessories
B328 Gimbal‑mount Bracket
Mounts on a single-gang box and allows rotation of a
detector. Wires are hidden inside.
Order number B328
B335-3 Swiveling low-profile mount
Swiveling, low-profile, plastic mount for wall mounting.
The vertical swivel range is +10° to -20°, while the
horizontal swivel range is ±25°. Available in triple
packs.
Order number B335-3
B338 Universal Ceiling‑mount Bracket
Swiveling plastic mount for ceiling mounting. The
vertical swivel range is +7° to -16°, while the horizontal
swivel range is ±45°.
Order number B338
5 | ISC‑PPR1‑WA16x Professional Series PIR Detectors with Anti‑mask
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 2014 | Data subject to change without notice
2599793419 | en, V12, 19. Mar 2014
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
latam.boschsecurity@bosch.com
www.boschsecurity.com.cn
www.boschsecurity.com