- Industrial & lab equipment
- Electrical equipment & supplies
- Batteries & accessories
- Battery chargers
- Tycon Systems
- TP-BC12-300
- Data Sheet
advertisement
TP-BC Series
DATA SHEET
High Power Battery Charge Controller
Features
300W Total Power
Regulated 12VDC or 24VDC or 48VDC
Output Voltage
Seamless Switchover From AC to Battery
Power when AC Power Fails.
Load Control to Prevent Battery
Overdischarge. Automatic Recovery.
Smart Charge program for GEL/AGM or WET type batteries
Wide temperature operation
Applications
Wireless Base Stations, Cellular Base Stations
Surveillance Systems
Battery Backup Systems
Description
The TP-BC series of smart battery chargers provide up to 300W of total power. Part of the power is allocated to the regulated load output and remaining power is allocated to battery charging. The smart battery charger is compatible with GEL/AGM type sealed lead acid batteries and also WET type lead acid batteries (like car batteries).
The load output is regulated so that output voltage does not exceed 12.5VDC on the 12V model and 24.5VDC on the
24V model and 48.5VDC on the 48V model. Also the load output will turn off when the battery voltage is low to prevent over discharge of the batteries which can shorten the useable life of the batteries. Load output will turn back on automatically when batteries have sufficient charge. The TP-BC series provides seamless switchover from AC power to battery power so there is no interruption whic h could reset a user’s electronics. The charger auto-recovers from a power failure so no user action is necessary.
The charger has various protections for short circuit, overvoltage protection, overcurrent and reverse battery. It operates over a wide temperature range making it suitable for industrial applications.
The battery charger will not work without a battery connected.
A solar panel and solar charge controller can be added to the system if supplemental power from solar is desired. A
Wind Turbine can be added if wind power is available.
There are various LEDS on the front panel to see status-at-a-glance of the Load Output, Charging Condition and AC
Power Condition.
LED Indicators LOAD (Load Power is Turned On = Green)
PWR (AC Power On = Yellow)
BATT ( Battery is Connected = Green)
CHD ( Battery is Fully Charged = Green)
CHG ( Battery is Charging = Yellow)
WET / GEL
– Switch is positioned to WET(Green) or GEL(Yellow)
Notes:
All shipments F.O.B. Draper, UT 84020
Tycon Power Systems POE Midspan Injectors carry a 1 year warranty
TP-BC Series
Page 2
Specifications
Total Power Available (for
Load and Battery charging)
Nominal Battery Voltage
Load Output Min Current
Load Output Max Current
Overdischarge Protection
TP-BC12-300
300W
12VDC
1A
12A
TP-BC24-300
300W
24VDC
1A
8A
TP-BC48-300
300W
48VDC
1A
6A
Battery Charge Max Current
Battery Charger Voltage
10.7V Load off / 12.6V Load on
12A
WET Equalize = 14.6V, Float =
13.2V
GEL Equalize = 14.2V, Float =
13.5V
21.5V Load off / 25.2V Load on
12A*
* if load current is 8A then battery charge current is 4.5A. If load current 6A then battery charge current is 6.5A
WET Equalize = 28.8V, Float =
26.4V
GEL Equalize = 28.4V, Float =
27V
5%
40V Load off / 51V Load on
6A*
* if load current is 3A then battery charge current is 3A. If load current 1A then battery charge current is 5A
WET Equalize = 58V, Float =
53V
GEL Equalize = 56.8V, Float =
54V
Load Regulation
Line Regulation / Ripple
Noise
Efficiency
Self Consumption
Load and Batt Connections
EMC Standards
Safety Standards
AC Power Input (+-10%)
AC Input Current
Fuse
Operating Temperature
Operating Humidity (RH)
Cooling
Storage Temperature
1%
2%
75% Minimum
<5W
Screw Wire Terminal, 10 AWG MAXIMUM
FCC Class A , NE55022 Class A
UL1950, CSA 22.2, TUV EN60950
Selector Switch 120VAC / 240VAC , 50/60Hz
3.5A @ 115VAC / 1.8A @ 240VAC
6A Internal
-20 to +60C (-4 to +140°F)
Up to 90% (non condensing)
Temperature Controlled Fan
-25 to +85°C (-13 to +185°F)
Up to 90% (non-condensing) Storage Humidity
250 x 185 x 55mm (9.8 x 7.3 x 2.2”) Dimensions (LxWxH)
2.4kg (5.2lb) Weight
System Ordering:
TP-BC12-300
300W Smart Battery Charger with regulated 12VDC load output with US Power Cord*
TP-BC24-300
TP-BC48-300
300W Smart Battery Charger with regulated 24VDC load output with US Power Cord*
300W Smart Battery Charger with regulated 48VDC load output with US Power Cord*
*Add an “E” suffix for Euro power cord
Notes:
All shipments F.O.B. Bluffdale, UT 84065
TP-BC Series carry a 1 year warranty
For further information contact:
Tyconpower.com
14641 S 800 W Suite A
Bluffdale, UT 84065
PH: 801-432-0003
FAX: 801-618-4220
TP-BC Series Spec Rev 3 6-Dec-12 Specifications Subject to Change Without Notice
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project