TP-SW5 Series

POE 5 Port Switch

Features



High Power 10/100 and 1000Mb (“G”) POE Switch



Remotely Power Equipment thru CAT5 Cable up to 100m



Up to 2A per Port



Built-in Surge Protection



Automatic MDI/MDI-X Crossover



Automatic Speed and Duplex Sensing



1K Self Learning MAC Address Table



Compact Size



High Temperature Operation



CE and FCC Certification

DATA SHEET

TP-SSW5-NC

Applications



Wireless Access Points and Client Devices



IP Phone and Security Camera Systems



Power multiple devices from 1 data cable

TP-SW5G-D (802.3af/at)

TP-SW5G-NC

TP-SW5G-24 (802.3af/at)

Description

The SW5 Series Power Over Ethernet (POE) switches offered by Tycon Power Systems are fully automatic high speed

5 port Ethernet switches with up to 2A of POE power per port. The switch comes in 4 models:

TP-SW5G-D: IEEE802.3af/at Compliant 48VDC 10/100/1000MB POE Switch. Switch accepts 48VDC power via a wire terminal connector on the back of the Switch or via 48VDC POE into the 802.3af/at compliant uplink port (90W max).

35W per port.

TP-SW5G-24: IEEE802.3af/at Compliant 48VDC 10/100/1000MB POE Switch. Switch accepts 12-36VDC power via a wire terminal connector on the back of the Switch or via 48VDC POE into the 802.3af/at compliant uplink port (90W max). Perfect for remote solar/battery systems. 35W per port.

TP-SW5G-NC: Universal Voltage 10/100/1000MB POE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the switch. Also accepts 12-57VDC (1A max) Passive POE input on port 5. 1A per port.

TP-SSW5-NC: Universal Voltage 10/100 POE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the Switch. This model is very compact at only 4”x5”x1.5”. 2A per port.

On the universal voltage models (“-NC”) the POE output voltage = the input voltage so it is universal in its application. The Ethernet spec supports distances up to 100m (328 feet) between the POE switch and the remote device. The Switches accept connections for up to two power supplies if additional power is required or if a backup power source is desired.

Tycon Power Systems sells a variety of power supplies in 60W, 120W and 180W sizes.

18VDC, 24VDC and 48VDC are available. All the Switches have DIN Rail mounts included for convenient DIN rail mounting.

Notes:





All shipments F.O.B. Draper, UT 84020

Tycon Power Systems POE Switches carry a 1 year warranty

Page 2

Specifications

Ethernet Standard

Notes:





TP-SSW5-NC

All shipments F.O.B. Bluffdale, UT 84065

Tycon Power Systems POE Switches carry a 2 year limited warranty

TP-SW5G-NC TP-SW5G-D

IEEE802.3/IEEE802.3u

TP-SW5

TP-SW5G-24

Ports 1 data/POE input and 4 data/POE, automatic crossover and polarity

Transmission Speed

100 Mbps /10 Mbps

Auto-negotiation

1000Mbps / 100 Mbps /10 Mbps Auto-negotiation

Switch Technology

Protocol

Flow Control

Data Transmission Rate

Address Table

Connections

POE Output Ports

Maximum POE Power

POE Auto Detection

POE Protection

Data Surge Protection

LED’s

DC Power Input

Self Consumption

Operating Temp

Operating Humidity (RH)

Storage Temperature

148800pps ,14880pps

Store and Forward

CSMA/CD

IEEE802.3x(full-duplex), Back Pressure(half-duplex)

1488000pps for 1000baseT,

148800pps for 100baseT, 14880pps for 10baseT

1K MAC, self-learning

Shielded RJ45

Port 1-4, auto power management Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8)

2A per port

Passive POE

1A per port 35W per port

Up to 35W per port; max 70W per 5 port switch

IEEE 802.3af, 802.3at

12V to 57VDC, Dual DC

Inputs, Reverse Polarity

Protected.

< 1 Watt

-40 to +85°C

(-40 to 185°F)

Over Temperature, Over Current, Over/Under Voltage

IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)

IEC61000-4-4 (EFT) 40A (5/50ns)

IEC61000-45 (Lightning) 20A (8/20μs)

Link (Green On), Activity (Green Blinking )

POE Detect (Yellow On), POE Detect Error (Yellow Blinking)

Power On (Green On), Power On Alarm (Red On)

12V to 57VDC, Dual DC

Inputs, Reverse Polarity

Protected. Also Accepts

POE power input on Port 5

48VDC (42V to 60V), Dual

DC Inputs, Reverse Polarity

Protected. Also Accepts POE power input on Port 5

24VDC (12V to 36V), Dual DC

Inputs, Reverse Polarity Protected.

Also Accepts POE power input on

Port 5

< 3 Watts < 3 Watts < 4 Watts

-20 to +75°C

(-4 to 167°F)

-20 to +75°C (-4 to 167°F)

5% - 90% (non condensing)

-55 to +105°C (-67 to +221°F)

Dimensions

Weight

(LxWxH)

90 x 118 x 40mm

(3.5 x 4.6 x 1.6”)

182g (6.7oz)

159 x 118 x 40mm (6.3 x 4.6 x 1.6”)

318g (11oz) 383g (13.5oz)

Device Pinouts

– TP-SSW5-NC TP-SW5G(-24), TP-SW5G-NC

RJ-45 Port 5 (Data Only) RJ-45 Port 1-4 (Data & Power) RJ-45 Port 5 (Data & Power) RJ-45 Port 1-4 (Data & Power)

Pin Symbol Description Symbol Description

Pin Symbol Description Symbol Description

1 RX+ Data Receive(+) RX+ Data Receive(+)

1 A+ / +Vdc Data A+ / DC Power(+) A+ Data A+

2 RX- Data Receive(-) RX- Data Receive(-)

2 A- / +Vdc Data A- / DC Powerr(+) A- Data A-

3 TX+ Data Transmit(+) TX+ Data Transmit(+)

3 B+ / -Vdc Data B+ / DC Power(-) B+ Data B+

4 NC No Connection +Vdc DC power(+)

4 C+ / +Vdc Data C+ / DC power(+) C+ / +Vdc Data C+ / DC power(+)

5 NC No Connection +Vdc DC power(+)

5 C- / +Vdc Data C- / DC power(+) C- / +Vdc Data C- / DC power(+)

6 TX- Data Transmit(-) TX- Data Transmit(-)

DC power(-)

DC power(-)

6

7

8

B- / -Vdc

D+ / -Vdc

D- / -Vdc

Data B- / DC Power(-)

Data D+ / DC power(-)

Data D- / DC power(-)

B-

D+ / -Vdc

D- / -Vdc

Data B-

Data D+ / DC power(-)

Data D- / DC power(-)

7

8

NC

NC

No Connection

No Connection

-Vdc

-Vdc

System Ordering:

TP-SW5G-D

5 Port 802.3at/af Gigabit POE Switch (no power supply included – requires 42-57V DC source)

TP-SW5G-24

5 Port 802.3at/af Gigabit POE Switch with 12-36VDC input (no power supply included)

TP-SW5G-NC

TP-SSW5-NC

5 Port 12V-56V Passive POE Gigabit POE Switch (no power supply included)

5 Port 12V-56V Passive POE 10/100MB POE Switch (no power supply included)

For further information contact:

Tyconpower.com

14641 S 800 W Ste A

Bluffdale, UT 84065

PH: 801-432-0003

FAX: 801-618-4220

TP-SW5 Spec Rev 17 23-Aug-13 Specifications Subject to Change Without Notice